Cutting Tools. Hydraulic cutting heads Hydraulic drive units Hydraulic systems

Transcription

1 Cutting Tools Hydraulic cutting heads Hydraulic drive units Hydraulic systems

2 Cutting tools Hydraulic cutting heads SDG 85 SDG 85, SDG 105 Hydraulic cutting heads max. Ø 85 mm and Ø 105 mm Cut armoured copper and aluminium cables (depending on cable type) Special short and lightweight design Extremely low weight for tools of such performance and size classes 30% lower in weight than previous model (SDG 85) SDG 105 Closed butting head with quick coupling, rotates 360 For connecting to hydraulic drive units with 700 bar operating pressure Reduced space requirements Equal cuts Cutting head can be opened manually Excellent accessibility due to compact design and side connection Optimized handle guarantees ergonomic handling SDG 85 SDG 105 Cutting range: max. Ø 85mm max. Ø 105mm Cutting force: 60kN 120kN Operation pressure: max. 700bar max. 700bar Length: approx. 445mm approx.432mm Width: approx.182mm approx. 206mm Weight: 4.24 kg 8.26 kg Cutting head max.ø 85 mm Cutting head max.ø 105 mm SDG85 SDG105 Scope of supply Carrying bag TT4

3 Cutting tools Hydraulic cutting heads SD 85 SD 85, SD 105, SD 120 Hydraulic cutting heads max. Ø 85 mm, Ø 105 mm, Ø 120 mm Cut light armoured copper and aluminium cables (depending on cable type) Short and extremely light design Increased cutting force of 14% 40% lower in weight (SD105/120) than previous models Suitable for fine stranded wire (new) Significantly improved ergonomics SD 105 Double extended field of application: - Suitable to cut even larger cable dia. with light armouring - Suitable to cut fine stranded conductors due to knife guide (SD105/120) - Improved stability due to enhanced supporting area Significantly improved handling by - Substancial weight reduction of 5 resp. 6 kg (SD105/120) - Short design (allows cutting in even hard to reach areas - new designed double handle (enables direct settling of tool without charge of grip Open cutting head with quick action coupling, rotates 360 To be connected with hydraulic drive units of 700 bar operating pressure SD 120 SD 85 SD 105 SD 120 Cutting range, max. : Ø 85mm Ø 105mm Ø 120mm * Cutting force: 40kN 74kN 55kN Thrust: 60 kn 120 kn 120 kn Operation pressure: 700bar 700bar 700bar Length, approx.: 450mm 510mm 538mm Width: 110 mm 120 mm 120 mm Height, approx. 228 mm 228 mm 270 mm Weight: 5.18 kg 7.71 kg 8.67 kg Gewicht: 28,3 kg 28,3 kg 28,3 kg *: For cable dia. > 105 mm only suitable for special cables, e.g. telecommunication cables - not suitable for power cables > 105 mm dia. Hydraulic cutting head Ø 85mm Hydraulic cutting head Ø 105mm Hydraulic cutting head Ø 120mm SD85 SD105 SD120 Scope of supply Carrying bag for SD85 Carrying bag for SD105 Carrying bag for SD120 TT2 TT2 TT4

4 Cutting tools Hydraulic drive units EHP 4 Electro hydraulic drive unit Manually adjustable piston feed speed / pump capacity Closed, compact and lockable housing (IP54 or higher) for protection against humidity, dust and unauthorised manipulation Compatible with lauke hydraulic crimping and cutting heads For connection to busbar machining centre with adapter CMGS Suitable for punching busbars in combination with the LS 120 with adapter CMGS Compatible with Greenlee hole punching tools (round and special shape punches) with adapter CMGS EHP 4/115 EHP 4/230 EHP 4/400 Version: AC AC three-phace AC Rated output: 0,75kW 0,75kW 0,75kW Motor voltage: 115V / 50Hz 230V / 50Hz 400V / 50Hz Capacity: 0,82 l/min 0,82 l/min 0,82 l/min Operating pressure: max. 700 bar max. 700 bar max. 700 bar Operating mode: 70% ED 70% ED 70% ED Weight: 28.3 kg 28.3 kg 28.3 kg Electro hydraulic drive unit 115V Electro hydraulic drive unit 230V Electro hydraulic drive unit 400V EHP4115 EHP4230 EHP4400 Scope of supply Connecting cable, 4 m Foot switch FTA1 Order info The hydraulic drive units can also be configured to suit customers system requirements Accessories Transport trolley, max. 150 kg Two hand safety control system Foot switch Carrying case for crimping and cutting heads Carrying case SD202/1 and SD202/2 Carrying case for high pressure hose, max. 10 m High pressure hose, 3 m High pressure hose, 4 m High pressure hose, 5 m High pressure hose, 6 m High pressure hose, 8 m High pressure hose, 10 m Digital meter for force and pressure measurement Pressure sensor 1000 bar lauke gland adapter to Greenlee connector adapter TW150 ZST3 FTA1 TT2 TT4 TT5 HS23 HS24 HS25 HS26 HS28 HS210 TC1S TP1000 CMGS

5 Cutting tools Hydraulic systems AS 105 FHP, AS 120 FHP Hydraulic cutting heads with foot pump Cut armoured copper and aluminium cables (depending on cable type) Special short and lightweight design of the cutting heads Foot pump with two-stage hydraulic system Cutting head with quick coupling, rotates 360 High-pressure hose, 2 m Manual retraction in case of need, even at high pressure AS 105 FHP AS 120 FHP Cutting range: max. cable size = Ø 105 mm max. cable size = Ø 120 mm Operating pressure: max. 700 bar max. 700 bar Weight: 19.7 kg 20.7 kg Hydraulic cutting head with foot pump max. Ø 105 mm Hydraulic cutting head with foot pump max. Ø 120 mm Scope of supply High-pressure hose, 2 m Foot pump 700 bar Steel carrying case Accessories Hydraulic cutting head max. Ø 105 mm Hydraulic cutting head max. Ø 120 mm Foot pump 700 bar High-pressure hose, 2m High-pressure hose, 3m High-pressure hose, 4m High-pressure hose, 5m High-pressure hose, 6m High-pressure hose, 8m High-pressure hose, 10m Digital meter for force and pressure measurement Pressure sensor 1000 bar AS105FHP AS120FHP HS22 FHP2 MU SD105 SD120 FHP2 HS22 HS23 HS24 HS25 HS26 HS28 HS210 TC1S TP1000 FHP 2 Foot pump 700 bar Two stage hydraulic system Manual retraction in case of need, even at high pressure Sturdy design For the operation of hydraulic crimping and cutting heads Automatic pressure switch off High-pressure hose, 2 m Operating pressure: Weight: max. 700 bar 12.0 kg Foot pump 700 bar FHP2

6 Mechanical Crimping Tools for Photovoltaic Systems

7 Crimping tools Mechanical crimping tools P90 MC3 1 Crimping heads of Pro Series for Multi-Contact plug connectors MC mm² High precision by linear die movement Compatible crimping heads with P1L Precise drives Optimized force transmission Crimping range: mm² Multi-contact plug connectors MC3: mm² Length: 65mm Weight: 106g Crimping heads for Multi-contact plug connectors MC mm² P90MC31 90 MC3 2 Mechanical crimping tool for Multi-Contact plug connectors MC mm² High precision by linear die movement Integrated, disengageable ratchet Non-slip handles Precise drives With ratchet With precision stop Optimized force transmission Crimping range: mm² Multi-contact plug connectors MC3: mm² Length: 270mm Weight: 735g Mechanical crimping tool for Multi-Contact plug connectors MC mm² 90MC32

8 Crimping tools Mechanical crimping tools 90 MC4 1 Mechanical crimping tool for Multi-Contact plug connectors MC mm² High precision by linear die movement Integrated, disengageable ratchet Non-slip handles Precise drives With ratchet With precision stop Optimized force transmission Crimping range: mm² Multi-contact plug connectors MC4: mm² Length: 270mm Weight: 735g Mechanical crimping tool for Multi-contact plug connectors MC mm² 90MC41 90 MC4 2 Mechanical crimping tool for Multi-Contact plug connectors MC mm² High precision by linear die movement Integrated, disengageable ratchet Non-slip handles Precise drives With ratchet With precision stop Optimized force transmission Crimping range: Multi-contact plug connectors MC4: Length: Weight: mm² mm² 270mm 735g Mechanical crimping tool for Multi-contact plug connectors MC mm² 90MC42

9 Wall holder VDE-tools The convenient wall holder LWHSET1 with 14 VDE-tools pieces

10 LWHSET1 L040160IS L020180IS L050205IS L060160IS L130PM1IS L130PM2IS L IS L IS L IS L110PH1IS L110PH2IS L120PZ1IS L120PZ2IS L19073IS The convenient wall holder is assembled with original lauke VDE-hand tools. All VDE-tools offer a high protection for working with parts under voltage till AC V (alternating voltage) and DC V (direct voltage). All screwdrivers are marked at the end of the grip with the profile of the screwdriver blade. The combination plier and the telephone plier are all provided with an integrated ring spanner that can be used for screws M8 - M10 (ø mm). The holder also includes a side cutter and a stripping tool for cables and single wires up to 10 mm 2. Gustav lauke GmbH Auf dem napp 46 D Remscheid Telefon: +49 (0) 2191 / Telefax: +49 (0) 2191 / info@klauke.textron.com Internet: - L130PM1IS and L130PM2IS VDE-screwdriver plus/minus - L IS, L IS and L IS VDE-screwdriver slotted - L110PH1IS and L110PH2IS VDE-screwdriver cross-slotted (Phillips) - L120PZ1IS and L120PZ2IS VDE-screwdriver cross-slotted (Pozidriv) - L19073IS Voltage tester with heavy duty handle, singlepole - L040160IS VDE-side cutter 160 mm - L020180IS VDE-combination plier 180 mm integrated ring spanner - L050205IS VDE-telephone plier, straight 205 mm integrated ring spanner - L060160IS VDE-wire stripper 160 mm for cables and single wires up to 10 mm 2 - Incl. wall holder Technische Änderungen vorbehalten. FLLWHSET1GB /09 I

11 Consulte por otros productos lauke

12 Consulte por otros productos lauke