Tools & Test Equipment

Transcription

1 Tools & Test Equipment With such a large complement of connectors to offer, it is only fitting that you ll find an equally complete offering of Emerson termination tools.this line of products includes both ratchet and non-ratchet crimp tools for coaxial, modular plugs, and D-Sub connectors. In addition, you will find a wide array of cable strippers, cutters, impact and nonimpact punch down tools, and a variety of multi-meters, cable testers and termination tool kits to meet your needs. Pro-Series 110 & 66 Impact Punch Down Tools Pro-Series Impact Punch Down Tool Tool includes two blades. A 66 standard with a 110 installed in the handle. It has a Twist Blade Locking Mechanism, and an adjustable Hi-Lo Impact Control. (Replacement Blades are interchangeable with Harris TM Blades.) Blade No P (110 only) (66 only) Non-Impact Punch Down Tools Non-Impact Punch Down Tool for 66 & 110 type terminations (punch only) with a reversible blade, 66 on one end and 110 on the other end P Non-Impact Punch Down Tool for 66 type terminations (punch & cut) with a reversible blade, 66 punch on one end and a 66 cut on the other end P Keychain Punch Down Tools Keychain Punch Tool for UTP/STP 110 IDC Terminations. Pocket Stripper & Punch Tool for UTP/STP 110 IDC Terminations P Tel: Fax:

2 Tools & Test Equipment Modular Plug Crimping Tools Modular Crimping Tool that cuts, strips and terminates 4, 6, 8, & 8 Keyed Modular Plugs. (Works on AMP TM & Stewart TM Plugs.) Modular Crimping Tool that cuts, strips and terminates 2, 4, 6, 8, & 8 Keyed Modular Plugs. (Will not work on AMP TM RJ-45 Plugs.) Deluxe Modular Crimping Tool that cuts, strips and terminates 2, 4, 6, 8, and 8 Keyed, 10, DEC 4 & 6 and 4 Conductor Handset Plugs. (Works on AMP TM RJ-45 Plugs only.) Non-Ratchet No P w/ Ratchet No RP Non-Ratchet No P w/ Ratchet No P w/ Ratchet No P Economy Modular Crimping Tool for RJ-11/12 Plugs. Cuts, strips and terminates 2, 4 and 6 Pin Modular Plugs. Economy Modular Handset Crimping Tool for RJ-22 Plugs. Cuts, strips and terminates 4 Pin Handset Plugs. Economy Modular RJ-45 Crimping Tool that cuts, strips and terminates 8 & 8 Keyed Modular Plugs. Blister No P Blister No P Blister No P Wire Cutters & Strippers Heavy Duty Cable Cutter for cutting RG-8 Cable and Multi- Conductor Cable up to.500". 5" Cutter & Stripper Thin profile, Carbon Steel All Purpose Utility Tool Wire Stripper, Cutter, Plier & Crimper, strips 10 to 18 AWG Wire 5" Cutter Economy Stripper Adjustable control, Return Spring, Carbon Steel Blister No P Blister No P Blister No P Blister No P 52 Tel: Fax:

3 Tools & Test Equipment D-Sub Crimping & Termination Tools D-Sub Full Cycle Ratchet Crimping Tool Crimps AWG Non-Insulated Open Barrel Connectors, D-Sub & V.35 Contacts. D-Sub Full Cycle Ratchet Crimping Tool with Tension Adjustment Wheel, crimps & AWG, Non-Insulated Open Barrel Connectors, D-Sub Contacts. D-Sub Crimping Tool for Precision Machined Contacts, 4 Way Indent, Crimps AWG with Built-in Contact Locator. Insulated Terminal Ratchet Crimping Tool Crimps AWG fully insulated terminals in an ovalized crimp. Blister No P Replacement Die No Blister No P Blister No P Blister No P Replacement Die No See our wide selection of D-Sub components on pages D-Sub Non-Ratchet Crimp Tool Crimps Non-Insulated Open Barrel Connectors & Contacts. Blister No P Automatic Trigger Stripper for stripping Stranded Multiconductor Cable and Solid Conductor Cable, AWG. Blister No P 4" Universal UTP Stripping Tool for Round or Flat Wire and UTP Cable from 3.5 mm-9 mm max. Even irregular outshape of insulation can be put into the V and U slots. Strips 2, 4, 6 & 8 Conductor. Flat or Round, Solid or Stranded Cable. Blister No P Automatic Wire Stripper Designed for Radio, TV & Computer and Telephone cabling applications to cut and strip insulation automatically. Blister No P size: mm Blister No P size: mm D-Sub Insertion Tools Standard D-Sub Insertion & Extraction Tool High-Density D-Sub Insertion & Extraction Tool T Tel: Fax:

4 Tools & Test Equipment Compression Connector Crimping Tools Compression Crimp Tool For RG-59 & RG-6 Snap-N-Seal compatible 20.3mm (F) Connectors.. Blister No P New! All-In-One Adjustable Ratchet Crimp Tool for all types of BNC, F and RCA Compression Connectors Blister No P Economy F Series Crimping Tools Economy Hex Crimping Tool for RG-6 & RG-59. Economy packaged in non-retail box. Boxed No H Standard Crimping Tool for RG-6 & RG-59. Economy packaged in non-retail box. Boxed No Standard Crimping Tool for RG-6 & RG-59. Includes (10) No F-59A Connectors with attached 1/8" Ring. Blister No P Heavy Duty F Hex Crimping Tools Deluxe Hex Crimping Tool for RG-8, 11 & 213. Hex Sizes:.10",.322",.448" Deluxe Hex Crimping Tool for large O.D. Cables, RG-6, RG-11 & UHF RG-8. Hex Sizes:.102",.359",.406" Deluxe Hex Crimping Tool for large O.D. Cables, RG-6 & RG-59. Economy packaged in non-retail box. Hex Sizes:.255",.322" Deluxe Hex Crimping Tool for RG-6 & RG-59, retail packaged with (10) No F-59ALM Connectors with attached 1/2" Gripped Ring. Hex Sizes:.255",.322" Boxed No P Blister No P Boxed No Blister No P Universal Coaxial Crimping Tools Universal Ratchet Crimping Tool for BNC, TNC & Mini UHF. Five crimp sizes for Pins & Connector Ferrules. Crimps 2 & 3 piece Connectors. Features adjustable crimp pressure and quick release safety latch. Blister No P Hex Size Use For.068" Center Conductor (16-22 AWG).110" Center Conductor (10-13 AWG).213" Ferrule for RG-58/59TFE/141/303/55/142/233/ " Ferrule for RG-59/62/140/210/Belden " Ferrule for RG-6/143/212/222/Belden 8281,9231,9141 Replacement Frame & Dies: Description Hex Sizes 99-DC-5 Die - 2 pc BNC & TNC.320",.385" 99-N-8 Die - N (RG-8 Hex).110", U-8 Die - UHF (RG-8 Diamond).110", Die - BNC, TNC & MiniUHF See P sizes above * F Replacement Frame *Note: All dies listed on this page are interchangeable with this Tool Frame. Blister No P Blister No P F Ratchet Crimping Tool Crimps RG-59, RG-6, and RG-Quad Shield F type CATV connectors. Features adjustable crimp pressure and quick release safety latch. Hex Sizes:.255",.324",.354" Ratchet Crimping Tool for Twin-Ax 9" Ratchet Crimp Tool. For Twin-Ax Ferrule and Contacts. Features adjustable crimp pressure and quick release safety latch. Hex Sizes:.429",.075",.075" 54 Tel: Fax:

5 Tools & Test Equipment Standard Series Ratchet Crimping Tools This series of tools offers a wide selection of interchangeable dies, a high quality steel frame with a full cycle ratchet mechanism and a quick release safety latch. All are blister packaged for retail display. Tool Cable Size Description Hex Sizes Die Part # P RG-58, RG-161, RG-178, SMA, SMB, Fiber. 043",.069",.100" RG-174,RG-182, RG-188, RG ",.151",.210" P RG-6, RG-8 Crimps BNC-TNC 3 pc. Connectors.390",.275",.065" RG-59, RG-62 with standard rings P RG-58, RG-58AU Crimps BNC-TNC 3 pc. Connectors.235",.128",.065" RG-139, RG-185 with standard rings RG-188, RG P RG-58, RG-58AU, RG-59 Crimps BNC-TNC Teflon, RG-62 Teflon.325",.210",.065" & 3 pc. Connectors also crimps 1/2" ring F Connectors P RG-59, RG-62 Crimps BNC-TNC 2 & 3 pc. Connectors.325",.258",.066" Belden 8281 with standard & dual crimp rings P RG-58, RG-59, RG-62, Crimps BNC & TNC 2 & 3 pc. Connectors. 257",.210",.060" RG-58TFE, RG-59TFE, with standard crimp rings by RG-62TFE AMP, Kings and Amphenol P RG-58, RG-59TFE Crimps 2 pc. BNC & TNC Connectors.320",.211" P RG-59, RG-62 Crimps 2 pc. BNC & TNC Connectors.320",.250" P RG-58, RG-58TFE, Crimps 3 pc. BNC-TNC &.213",.060" RG-59TFE, RG-141TFE, Mini-UHF Connectors RG-142, RG-223, RG-400 RG-303, RG P RG-59, RG-62, RG-450 Crimps 3 pc. BNC-TNC Proflex,. 255",.060" RG-8X & Mini-UHF Connector P RG-122, 180, 34M Crimps 3 pc. BNC-TNC. 184",.060" RG-195, 8218, RG-174 Connectors 188, RG-179, 187, P Open Barrel Crimper Crimps open barrel V.35 Contacts, Non-insulated Connectors AWG D-sub, Mini pins & sockets *99-frame-9" " Frame for Standard Ratchet Tools *Note: All standard series dies on this page are interchangeable with this Tool Frame. Offset Ratchet Crimping Tools P Ratchet Crimping Tool for 2- & 3-Piece Crimp Connectors. Offset die with 3 crimp sizes for Pins & Connector Ferrule including F Connectors and RG-58 & 59TFE Cable. Features adjustable crimp pressure and quick release safety latch P Ratchet Crimping Tool for 3-Piece Crimp Connectors. Offset die with 3 crimp sizes for Pins & Connector Ferrule including RG-58 & 59TFE Cable. Features adjustable crimp pressure and quick release safety latch. Hex Size Use For.060" Center Conductor.210" Ferrule for RG-58/141/303/55/142/233/ " Ferrule for RG-6/143/212/222/Belden 8281,9231,9141 Hex Size Use For.060" Center Conductor.210" Ferrule for RG-58/141/303/55/142/233/ " Ferrule for RG-59/62/140/210/Belden 8279 Tel: Fax:

6 Tools & Test Equipment Self-Adjusting Coax Strippers 2-Step Cable Stripper with self-adjusting replacement blades for RG-6, 58, 59 & P B 3-Step Cable Stripper with self-adjusting replacement blades for RG-6, 58, 59 & P B 3-Step Coax Strippers 3-Step Cable Stripper with adjustable replacement blades for standard & Teflon RG-58, 59 & P Step Cable Stripper with adjustable replacement blades for standard & Teflon RG-59, RG-6 & Belden P Step Cable Stripper with non-adjustable replacement blades RG-8, 11 & P Step Coax Strippers 2-Step Cable Stripper with adjustable replacement blades for standard & Teflon RG-58, 59 & P Step Cable Stripper with adjustable replacement blades for standard & Teflon RG-59, RG-6 & Belden P Step Cable Stripper with non-adjustable replacement blades RG-8, 11 & P B Universal 2-Step Cable Stripper with adjustable replacement blades for RG-6, 58, 59 & P Step Cable Stripper with adjustable replacement blades for RG-6, 58, 59 & 62. Poly bagged. VSCST-1B 56 Tel: Fax:

7 Coaxial Connector Assembly Tools Hand Crimp Tool Precision Astro Tool hand crimping tool makes cable assembly fast and easy. Crimping tool features interchangeable steel dies. Ratchet action of tool controls crimping operation for precise uniform ferrule crimps. CONNECTOR CABLE PREFERRED CRIMP TYPE TYPE DIE SET DIMENSIONS MCX SMA SMB SMC MCX SMA SMB SMC 75 Ohm SMB MCX SMA SMB SMA 75 Ohm SMB RG-178/U RG-196/U RG-161/U, RG-174/U RG-179/U, RG-187/U RG-188/U, RG-316/U LMR-100 RG-188 DS, RG-316 DS RG-179 DS, RG-187 DS, BELDEN 735A RG-58/U RG-141/U RG-303/U RG-55/U RG-142/U RG-223/U RG-400/U LMR-195 LMR-200 LMR-240, RG Hex =.105 (2.67) Width =.325 (8.26) Hex =.128 (3.25) Width =.400 (10.16) Hex =.151 (3.83) Width =.400 (10.16) Hex =.213 (5.41) Width =.375 (9.52) Hex =.255 (6.48) Width =.400 (10.16) N Type RG-316/U, 316 DS Hex =.160 (4.06) Width =.400 (10.16) *Economy Hand Crimp Tool also available with four hex sizes in one tool page 191. Ordering Information for Crimping Tool DESCRIPTION ASTRO TOOL P/N Frame Only Single Hex Die Single Hex Die Single Hex Die Single Hex Die Single Hex Die Single Hex Die Crimp Dies for Contacts use with CONNECTOR TYPE PREFERRED DIE SET CRIMP STYLE SMB Cross Hole Style Body 50 Ohm Only Mini 75 Ohm SMB, MCX 75 Ohm Cross Hole Style Body Double Diamond Double Diamond 190 Tel: Fax:

8 Coaxial Connector Assembly Tools Economy Hand Crimp Tool Hand crimp tool and die set includes all hex sizes necessary for subminiature connector applications. Ratchet tool action insures a complete crimp every time. DESCRIPTION HEX WIDTH CONNECTOR TYPE Hand Crimp Tool Frame Only.105 (2.67).250 (6.35) Die for.047 dia. flexible cable;.128 (3.25).250 (6.35) RG-178, RG-316, RG-316 DS.151 (3.83).250 (6.35) MMCX*, MCX and Contact Crimp w/stop Diamond Crimp for.038 (0.96) Dia. Contact.035 (0.89) Die for RG-178, 316, 316 DS,.105 (2.67).390 (9.91) , 142, LMR-100, LMR-195,.128 (3.25).390 (9.91) MCX, SMB, SMC, LMR (3.83).390 (9.91) SMA, 75 OHM SMB.213 (5.41).390 (9.91) Die for RG-179, 179 DS, 735A,.128 (3.25).390 (9.91) RG-59, LMR (3.83).390 (9.91) 75 Ohm MCX, SMA.178 (4.52).390 (9.91) Mini-75 Ohm SMB.255 (6.48).390 (9.91) *Use for MMCX straight cabled bulkhead jack body crimp. 3-Piece SMA - Contact Hand Crimp Tool Quick and secure crimp assembly of SMA contacts to all cable sizes used by the 3-piece SMA connector line is possible. The crimp tool is used in conjunction with turret positioner which positions the crimp location on the contact with no user setup required. Set the selector to the appropriate crimp size, insert contact and cable into tool and squeeze handles of tool. A complete and accurate crimp is obtained every time, with no partial crimp. A ratchet insures a complete cycle of the tool. Automated tooling information is available on request. DESCRIPTION ASTRO TOOL MILITARY Frame Only M22520/ Positioner N/A 3-Piece SMB, MCX - Contact Hand Crimp Tool The micro contact crimp tool provides an accurate eight indent crimp on small diameter contacts used in the 3-Piece SMB and MCX connectors. This crimp tool is used with the Variable Positioner. Set the crimp size in the adjustment window and position the variable locator to obtain an accurate repeatable crimp on the contact. DESCRIPTION ASTRO TOOL Frame Only Positioner N/A Tel: Fax:

9 Coaxial Connector Assembly Tools MMCX Assembly/Decoupling Tool This tool will assemble the end cap to a standard right angle MMCX plug connector in the field. Simply insert connector and cap into tool cavity, then turn handle to swage the cap into place. The slotted end of the tool can be used to disengage a right angle MMCX plug from a mating receptacle MCX Right Angle Plug Assembly Tool This quick and easy to use tool will press the end cap onto standard right angle MCX plug connectors. Simply insert the connector and cap into the staking nest and a light squeeze of the handles will swage the cap into place. The jaw tips are shaped to grip a right angle MCX plug body for insertion or disengagement to a mating receptacle. The jaws are hardened steel and the handles are cushioned to minimize stress to the user. For use with all cable groups except RG C Spring Compression Tool For assembly of SMA Coupling Nut SMA Knurl Mount Assembly Tool The Knurl Mount SMA Spark Plug Connectors can be pressed into position using this thread-on fixture designed for low volume lab use SMB Plug Removal Tool Reaches in to disengage SMB connectors in high density packaging applications Tel: Fax:

10 Coaxial Connector Assembly Tools SMK (2.92mm) Tools Accurate assembly of the SMK cabled connectors is obtained with the tools listed below. Industry standard devices are used if possible for customer convenience and tool compatibility. A. B. E. D. C. F. ITEM DESCRIPTION A Semi-Rigid Cable Vise (does not include inserts (B) or Vise Stop (F)) B Cable Clamp Inserts,.086 Semi-Rigid Cable Clamp Inserts,.141 Semi-Rigid C Contact Soldering Tool,.086 Plug Contact Soldering Tool,.141 Plug D Body Soldering Tool,.086 Plug Body Soldering Tool,.141 Plug E Bead Assembly Tool, Semi-Rigid Plugs, All Cables F Vise Stop, (2.92mm) Tel: Fax:

11 Prestige Coax Cable Strippers Self-Adjusting Blades (Replaceable Cassette) 2-step Cable Stripper w/replacement cassettes for RG-6, 58, 59 and 62 DESCRIPTION P Tool B Replacement Cassette 3-step Cable Stripper w/replacement cassettes for RG-6, 58, 59 and 62 DESCRIPTION P Tool B Replacement Cassette Blade Series (w/adjustable blades) Two Step Cut Universal Coax Stripper Adjustable blades for RG-6, 58, 59 and 62 w/switchable V-block does 2 cuts in 1 motion DESCRIPTION P Tool Replacement Blades (set of 2) Coax Stripper for Standard and Teflon Adjustable blades for RG-58, 59 and 62 does 2 cuts in 1 motion DESCRIPTION P Tool Replacement Blades (set of 2) Coax Stripper for Standard and Teflon Adjustable blades for RG-6, 58, 8281 does 2 cuts in 1 motion DESCRIPTION P Tool Replacement Blades (set of 2) Three Step Cut Coax Stripper for RG-58, 59, 62 adjustable blades does 3 cuts in 1 motion DESCRIPTION P Tool Replacement Blades (set of 3) Coax Stripper for RG-59, RG-6, 8821 does 3 cuts in 1 motion DESCRIPTION P Tool Replacement Blades (set of 3) Coax Stripper for RG-8, 11, 213 does 3 cuts in 1 motion DESCRIPTION P Tool Replacement Blades (set of 3) 194 Tel: Fax:

12 Crimp Tools Ratchet and Universal Series by Prestige Prestige Ratchet Crimp Tools Adjustable Standard Series Long Life Full Cycle Ratchet Mechanism High Quality Steel Construction Quick Release Steel Post Full Range +/- Cam Replaceable Die Set Insulated Handle For 3-Piece Crimp Connectors RG-58, 59, 62, RG-59 PLENUM, RG-58 PLENUM, RG-62, 141, 142, 223, 303, 400, RG-8X, 140, 210, 450 Hex Sizes.060 (1.52),.210 (5.33),.067 (1.70),.255 (6.48) DESCRIPTION P Tool Replacement Die Prestige Universal Crimp Tool Adjustable Crimp Force With five hex sizes in one tool! Crimps 2 and 3 Piece Connectors CRIMP HEX CABLE.068 (1.73) Center Conductor 16 to 22 AWG.100 (2.54) Center Conductor 10 to 13 AWG.213 (5.41) RG-55, 58, 141, 142, 223, 203, 400, RG-59TFE.255 (6.48) RG-59, 62, 140, 210, Belden (8.23) RG-6, 142, 212, 222, Belden 8281, 9231, P Tel: Fax:

13 RF and CATV Crimp Tools Compression Crimp Tool For F (CATV) type weatherproof compression connectors (RG-59 and RG-6 single, Tri/Quad series P P F Ratchet Crimp Tool 9" inch ratchet crimp tool for RG-59, RG-6, RG-Quad.255,.324,.354 Hex size (for F Series CATV connectors) Deluxe Crimp Tool for RG-6, ,.255 Hex Size P Deluxe Crimp Tool for RG-6, 11, ,.322,.100 Hex Size (for F series connectors) P Deluxe Crimp Tool for RG-6, 11, UHF-8.406,.359,.102 Hex Size (for BNC, N and UHF connectors) P Boxed F Series Crimp Tool with Connectors Deluxe Crimp Tool for RG-6, 59 comes with 10 pieces connectors w/1/2" crimp ring.322,.255 Hex Size P 196 Tel: Fax:

14 Prestige Professional Ratchet Crimp Tools CABLE SIZE DESCRIPTION HEX SIZE REPLACEMENT DIE P BELDEN pc. BNC & TNC.350, DC RG-8 UHF.405, U RG-58, 59, 8x, 450 N.255,.210, N RG-8 N.429,.100, N P BELDEN pc. BNC & TNC.310, MC P RG-6 2 pc. BNC & TNC.385, DC-5 Precision Ergo Hand Crimp Tool with Dieset Full cycle ratchet mechanism Quick release safety Perform both electrical and mechanical crimp High quality steel Each tool comes complete with crimp die Full range +/- Cam adjustment DESCRIPTION HEX SIZE HEX WIDTH P Pressmaster K.324 (8.22).475 (12.06) (Replacement Hand crimp tool frame.264 (6.71).475 (12.06) dieset ) with dieset.213 (5.41).394 (10.00).178 (4.52).394 (10.00) P Pressmaster K.350 (8.89).475 (12.06) (Replacement Hand crimp tool frame.288 (5.41).475 (12.06) dieset ) with dieset.042 (1.07).080 (2.03) P Pressmaster K.255 (6.48).475 (12.06) (Replacement Hand crimp tool frame.178 (4.52).475 (12.06) dieset ) with dieset.128 (3.25).475 (12.06).042 (1.07).080 (2.03) Longer handles for leverage Padded and contoured to fit in hand Precision ground die sets 50,000 cycle lifespan frame Standard Series Full cycle ratchet mechanism Quick release safety Perform both electrical and mechanical crimp High quality steel Each tool comes complete with crimp die CABLE SIZE DESCRIPTION HEX REPLACEMENT SIZE DIE P RG-58, 59, 62, 58TFE, Crimps BNC-TNC 2 & 3 piece connectors 59TFE, 62TFE w/ standard crimp rings.257,.210, P RG-6, 8, 59, 62 Crimps BNC-TNC 3-piece connectors w/standard crimp ring.390,.275, P RG-58/U, 58AU, 174, 139 Crimps BNC-TNC 3-piece connectors 185, 188, 316 w/ standard crimp rings.235,.128,.065, P RG-58, 58AU, Crimps BNC-TNC 2 & 3 piece connectors 59Teflon, 62 Teflon connectors also crimps 1/2 ring F connector.325,.215, P RG-59, 62, Belden 8281 Crimps BNC-TNC 2 & 3 piece connectors w/ standard & dual crimp rings.325,.258, P RG-58, 59TFE Crimps BNC-TNC 2-piece connectors.320, P RG-58, 58TFE, 59TFE, 141 Crimps 3-piece BNC-TNC connectors 142, 223, 400, 303, 55, and Mini-UHF connectors.213, BELDEN 9907, RG P RG-59, 62, Crimps BNC-TNC 2-piece connectors.320, P RG-122, 180, 34M, RG-195, Crimps 3-piece BNC-TNC connectors 8218, 174, 188, 179, 187, , BELDEN P RG-59, 62, 450 Proflex, RG-8x Crimps 3-piece BNC-TNC connectors.255, and Mini-UHF connectors Tel: Fax:

15 Assembly Tools and Fixtures Assembly Tools and Fixtures ( X-001 Series) For Standard Stacking Banana Plugs:.175 (4.44) Across Flats Quick and easy assembly of standard banana plug.175 (4.44) diameter is possible with the assembly tool and fixtures shown here. Strip wire jacket back 3/4 and feed wire through cross hole of metal contact. Fold stripped wire against metal plug body and slide insulated handle over banana plug body and wires. Insert contact wire into housing. Place into fixture. Push tip of tool into rear of contact. Snap contact into place. Handle of tool is curved to fit hand comfortably. Fixture and tip of tool made from tool steel. FIXTURE TOOL Crimp Tool ( X-XXX Series) For Insulated Standard Small Handle Tip Plugs:.080 (2.00) Diameter and.060 (1.50) Tip Jacks Quick and easy assembly of standard small handle tip plug.080 (2.00) diameter and.060 (1.50) tip jack is possible with the assembly tool shown. Set the selector to the appropriate wire size, strip wire to.180, insert wire and tip plug in tool, squeeze handles of the tool. A complete and accurate crimp is obtained each and every time, with no partial crimps. A ratchet insures a complete cycle of the tool. TOOL ASTRO TOOL MILITARY M22520/1-01 Tel: Fax:

16 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cinch : P P P P