CRIMPERS CRIMPERS. Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.
|
|
|
- Howard Dickerson
- 5 years ago
- Views:
Transcription
1 Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.com
2 All dies on pgs3,4, 5 & 6 fit each of these frames Ergo-Lunar Crimp Frame Ergo-Lunar Crimp Frame w/screws (No Die) Replacement Die Screw Lunar Crimp Frame Frame w/screws (No Die) Replacement Die Screw CrimPro Crimp Frame Our Best Frame Interchange Dies with thumbscrews. Crimp release provides operator safety. Crimping pressure adjustment wheel. Ratcheting action for perfect crimps. Elastomeric resin, double molded non-slip handle for comfort. CrimPro Tool, Frame-Only, No Die Set
3 Ergo-Lunar Crimp Frame Lunar Crimp Frame CrimPro Crimp Frame DIE Set Application Crimp Size Lunar frame w/die RG58, 59 and 62 AU, BNC and TNC 3-piece connectors Ergo-Lunar frame w/die CrimPro frame w/die Die only Cambridge Products BNC s RG58, RG59, 62AU, CP-88-1, CP-88-2, CP-89-1, CP-89-2 series Cambridge connectors & others CATV F connectors RG-59, RG-6 and RG-6 Quad AMP BNC /TNC RG58 (round) AMP BNC /TNC RG59/62AU (round & round, square) AT&T 735(A), RG58 and RG174 cable groups both 50 and 75 ohm center pins (Thinnet) RG59 and Belden 8281/1694A cable groups for both 50 & 75 ohm center pins RG8, RG11, RG213, RG216 BNC. TNC and N Series Connectors LMR400 RG174/179 Belden 1855, HDTV Compatible kings/adc/amphenol BNC, TNC, Mini-UHF, RG58, 141, 142, 303, 400, 59, 62, 210 Belden 8279, 8281, 9231, 9141 RG-6, 212, 222, Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.com
4 Ergo-Lunar Crimp Frame Lunar Crimp Frame CrimPro Crimp Frame DIE Set Application Crimp Size Lunar frame w/die Cambridge-AIM connectors RG6, RG8, RG59, RG62, 3pc BNC/TNC Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Cambridge-AIM connectors-rg58u, RG58AU, RG174, RG139, RG185, RG188, RG316, 3pc BNC/TNC Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Cambridge-AIM connectors-rg58u, RG58AU, RG59 Teflon, RG62 Teflon 2 & 3pc BNC/TNC, 1/2 F-Type Ergo-Lunar frame w/die CrimPro frame w/die Cambridge-AIM connectors-rg6, RG58 2pc BNC/TNC, w/standard Ring by Amphenol, Kings Die only Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Twinax Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die RG58, 174 Fiber Optic SC/ST/FC/LC Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Fiber Optic and Coaxial SMA/SMB/ SFR Connectors SC/ST/FC Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Broadcast Applications Belden 1855/1505/1694, Kings/ADC/Trompeter/Amphenol Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar Amphenol and General RG58,RG59,RG62, BNC/TNC, F-Type Ergo-Lunar CrimPro Die only Lunar frame w/die RJ45 modular plugs 8 position (Standard plugs, not AMP) Ergo-Lunar frame w/die CrimPro frame w/die Die only
5 Ergo-Lunar Crimp Frame Lunar Crimp Frame CrimPro Crimp Frame DIE Set Application Crimp Size Lunar frame w/die RJ11 modular plugs 2, 4 and 6 position (WE/Stewart style only) Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die RJ45 modular plugs 8 position(amp) keyed and non-keyed Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die RJ50 modular plugs 10 position Virginia Plastics style RJ22 2 & 4 Pin Handset Plugs RJ11 DEC MMJ 6 pos, Offset Plugs RJ AMP Style 2, 4 & 6 pos, Plugs Open barrel contacts AWG 20-18, 16-14, D-sub, Molex, AMP style pin Combi-Die for RJ45 WE/SS Modular plugs and RG6/6Q(CATV F-Type) Red, Yellow, Blue Insulated terminals AWG 10-12, 14-16, Nylon and Vinyl RJ45 plug and hex size.324/.360 Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/ die CrimPro frame w/die Die only Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.com 5
6 Ergo-Lunar Crimp Frame Lunar Crimp Frame CrimPro Crimp Frame DIE Set Application Crimp Size Lunar frame w/die Insulated Flag Terminals AWG 22-18, Ergo-Lunar frame w/ die CrimPro frame w/die Die only Lunar frame w/die Uninsulated Flag Terminals AWG 22-18, Ergo-Lunar frame w/ die CrimPro frame w/die CrimPro frame w/die Lunar frame w/die Uninsulated Terminals AWG 20-18, 16-14, 12-10, 8 Thin Style Insulated Terminals(red/yellow/blue) AWG Nylon and Vinyl Ergo-Lunar frame w/ die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/ die CrimPro frame w/die Die only Miniature Insulated Terminals AWG Nylon and Vinyl Wire ferrules AWG (Insulated and Non-Insulated) Wire Ferrules AWG 10-6 (Insulated and Non-Insulated) Lunar frame w/die Ergo-Lunar frame w/ die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/ die CrimPro frame w/die Die only Lunar frame w/die Ergo-Lunar frame w/ die CrimPro frame w/die Die only Lunar frame w/die AWG (Insulated and Non-Insulated) Wire Ferrules Ergo-Lunar frame w/die CrimPro frame w/die Die only D Spark Plug Cable-Cut, Strip, Crimp Ergo-Lunar frame w/die CrimPro frame w/die Die only 9PK-3003D26 6
7 Solar Series Crimpers Frame Only DIE Set Application Crimp Size D-Subminiature contacts, RS232 pins & sockets AWG Open Barrel contacts (Molex/AMP style) Tool including die Die only Tool including die Wire Ferrules AWG Die only Modular Plug Crimp Tool Best Value Strips and cuts 4 pair UTP and up to 8 wire flat satin cable Crimp 4 pin,6 pin and 8 pin plugs. Material: ABS + carbon steel Application Modular Plug Crimp Tool 4P/6P/8P (RJ45, RJ22, RJ11, RJ12) Economy Modular Plug Crimper Modular Crimp Tool-Standard Round Cable Stripping Feature Strips and cuts 4 pair UTP and up to 8 wire flat satin cable Crimp 4 pin,6 pin and 8 pin plugs Handset plugs Cuts, strips and crimps all-in-one Crimps stewart style modular plugs 4,6 & 8 position plugs Economy Modular Plug Crimper Modular Plug Crimper RJ11 2, 4 & 6 Position RJ45 8 Position Replacement Blade B Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.com 7
8 Economy All-ln-One Modular Plug Crimper All-in One Modular Plug Crimper Item #: RJ11 and RJ45 Item #: RJ11 and RJ45 Item #: RJ45 and RJ11 DEC/MMJ Item #: AMP style RJ22 Handset /RJ11/RJ11 DEC/ MMJ/RJ45/RJ50 Item #: RJ11 and RJ22 Handset Item #: WW/SS style RJ22 Handset /RJ11/ RJ11 DEC/MMJ/RJ45 Non-ratcheted design Cuts, strips and crimps in one tool Ratcheted design Our best quality modular plug crimpers 8 Standard plugs; 6 position & 8 Position DEC/MMJ plugs only;6 Position & 8 Position Keyed Postion Handset Plugs and 6 Position Plugs Replacement Blades for , , Standard Style Plugs 6 and 8 position Replacement Blade for Premium Crimper AMP Style Plugs only; 6, 8 & 10 Position Plugs,6 Position DEC Premium Crimper Standard Style Plugs; 4, 6 & 8 Position Plugs,6 Position DEC
9 Economy All-ln-One Modular Plug Crimper Heavy Duty Coaxial Crimping Tool Specification :.100 /.359 /.406 Crimping cable size : F-59,6,11 & UHF-58,8 Length : 9 Heavy Duty Coaxial Crimping Tool Cuts/strips/crimps all in one tool Our best value for modular plug crimpers F Type Crimper, Non-Ratcheted Safety.322 Hex &.255 hex cavities Economy crimper for CATV connectors Crimps RG59, RG62 and RG6 F Type crimper, Non-Ratcheted Cutting Stripping UTP / STP Cable Stripping Flat Cable Crimp Tool Crimping Safety latch 4 Position handset plugs only, and RJ22 Handset Position, and RJ11, RJ Position, and RJ Replacement Blades for , Replacement Blades for B Crimps IDC-type connectors onto flat cables Connector height range mm( inches) Flat Cable Crimp Tool Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.com 9
10 Economy Wire Ferrule Crimp Tool Crimping Pliers Material: SC45C HRC: 45±3 Including terminal: AWG22x6mm: 40pcs AWG18x6mm: 30pcs AWG14x7mm: 20pcs AWG20x6mm: 40pcs AWG16x8mm: 20pcs UY, UG & UR Connectors Built-in stop to protect against overcrimping Side cutter Insulated handles Economy Wire Ferrule Crimp Tool Crimping Pliers Crimper Insulated And Non-Insulated Wire Ferrules Closed Barrel Contacts Fully ratcheted tool AWG Single cavity tool Omega spring design crimps different size ferrules with no adjustments AWG Indent crimper Spring loaded D-sub contacts, screw machine version Crimper Insulated And Non-Insulated Wire Ferrules Standard plugs; 6 position & 8 Position Wire Ferrule Crimp Tool-Square Crimp Plier Style Economy Crimper Crimping range to AWG Square crimp for better ferrule retention For RG59/62/6 F-connectors Wire Ferrule Crimp Tool-Square Crimp CP-462 Plier Style Economy Crimper
11 Cutter/Stripper& Crimper For cutting copper wires 12~30 AWG For stripping copper wire 10 to 30 AWG Multi-Purpose Crimping Tool Bolt Cutter and rethreader For crimping non-insulated terminals AWG: 12-10/16-14/22-18 Pliers nose Wire cutter Crimp insulated and non-insulated terminals Quick lock protects precision cutting surfaces when not in use Wire stripper Versatile 7-inch wire cutter/stripper/crimper Red TPR cushion grip Scissors-action, up-front wire cutting and wire stripping handle provides maximum Pliers-style nose allows pulling and looping wire leverage Red cushion grip handle provides maximum leverage (TPR) Quick lock protects precision cutting surfaces when not in use Pivot point design assures greater joint strength and adds easy, precise adjustment capability. Cutter/Stripper& Crimper CP-415 Material: S45C HRC: 45±3 Multi-Purpose Crimping Tool Application Strip Bolt cutter Crimp 10, 12, 14, 16, 18, 20, 22AWG 4-40, 5-40, 6-32, 8-32, 10-32, ~16AWG 18~22AWG Cushioned handles D-Sub, 2-Stage,Open Barrel Crimper Multi-Purpose Crimper Non-ratcheted 2-Stage crimp (conductor & insulation) AWG Crimps a variety of open barrel contacts including solderless lugs and D-sub contacts AWG D-Sub, 2-Stage,Open Barrel Crimper Multi-Purpose Crimper All-ln-One Tool Application Strip Bolt cutter Crimp Wire cutter Wire stripper Bolt cutter Cushion-grips Crimper for red, blue & yellow insulated terminals Heavy Duty Wire Strippers/Crimpers All-ln-One Tool AWG: 10, 12,14, 16, 18, , 6-32, 8-32, 10-24, Insulated: 22-18, 16-14, Non-Insulated: 22-18, 16-14, AWG CP-412 CP Item #: CP-412 OAL: 206mm Item #: CP-413 OAL: 215mm Wire strip Stranded wire 24-22, 20, 18, 16, 14, 12 AWG Single wire 22-20, 18, 16, 14, 12, 10 AWG Stranded wire 26-24, 22-20, 18, 16, 14, 12, 10 Single wire 22-20, 18, 16, 14, 12, 10, 8 Bolt cutter 4-40, 5-40, 8-32, 6-32, 10-32, , 10-32, 10-24, 8-32, 6-32 Crimp 16-10, , (Non-insulated terminal) (Insulated terminal) Clamper & cutting Solid wire - 11
12 Compression Connector Crimp Tool Compression Connectors Crimp Tool Crimps RG59/6/6 Quad F-Compression Connectors. Crimps RG7/8/11 Riser F-Compression Connectors. Fully adjustable to fit common connector sizes. Universal tool for all F, BNC, and RCA connectors. Works on RG59/6/6Q and large RG7/ Riser Cable Connectors. Compression Connector Crimp Tool RG6/58/59/8/11 F, BNC and RCA Type Compression Connectors Compression Connector Crimping Tool Adjustable Compression Crimping Tool Crimps RG 59/6/6Q compression connectors. BNC/RCA and F-Type. For F-Type RG 59/6/6 Quad connectors only Compression Connector Crimping Tool Adiustable Compression Tool for F, BNC,RCA Compression Connectors CP-313 RG6/58/59 Compression Crimper Snap Fit Connector Crimper Interchangeable heads Crimps F-Type, RCA and BNC/TNC connectors Crimps RG 6,58,59 compression connectors Crimps F-Type connector and other brand compression style connectors 12 RG6/58/59 Compression Crimper Snap Fit Connector Crimper (F-Type connectors only) Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.com
13 Non-Insulated Terminal Crimper Ratcheted design Crimps solderless, noninsulated terminals AWG 22-6 O.A.L.:11-1/4 Non-Insulated Terminal Crimper Ratchet Crimp Tool for Non-Insulated Terminals Material: Frame S45C Die: SK-5 O.A.L.:13-3/8 Application Ratchet Crimp Tool for Non-Insulated Terminals AWG: 12-10, 8, 6, Heavy Duty Solderless Lug Crimper Two Capacity plates-aluminum and Copper Crimps terminals from AWG 8 to 250 MCM Adjustable w/knob on top of tool O.A.L. : 22-1/2 Heavy Duty Solderless Lug Crimper Compression Connector Crimp Kit Contents: Waterproof Connector Crimping Tool Round Cable Cutter Wire Stripper Tool F Connector for RG6(Black) 10pc Comes in Handy Carrying Case with Foam Insert Compression Eclipse Connector Tools Crimp Kit PK-3022 Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.com 13
Quick lnterchange Ratcheting Crimper Frame. Ratching release trigger
CP-3005F Quick lnterchange Ratcheting Crimper Frame Quick Die Change without tools : AISI 4140 HRC43 ±2 (Die not included) Interchangeable die with quick release trigger : S50C HRC: 45 ±3 Crimping pressure
Tools & Test Equipment
Tools & Test Equipment With such a large complement of connectors to offer, it is only fitting that you ll find an equally complete offering of Emerson termination tools.this line of products includes
Taxonomies, Classifications, and Categories NEMA RATED TURNLOK PLUGS, CONNECTORS, & RECEPTICLES Combo Telephone Tool
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 30496 Telemaster RJ11/RJ45 Ideal Catalog Number 30496 Manufacturer Ideal Telemaster Combo Telephone Tool, Steel Frame,
PRE-INSULATED CRIMPING TOOLS. YYT-1 - Ratchet crimping tool for pre-insulated terminals
PRE-INSULATED YYT-1 - Ratchet crimping tool for pre-insulated terminals 254mm 0.603kg AWG 20-11 AP-03C - Ratchet energy saving crimping tool for pre-insulated terminals 0.55kg AWG 20-10 Continuous crimping
CRIMPING PLIERS. 00 Crimp Grip Pliers A. EAN mm Pliers Applications. Capacity. Article No.
00 Crimp Grip Pliers for solder-free electrical connections quick release lever high contact pressure with minimum handforce using toggle lever transmission reproducible crimping quality with high tensile
CRIMPING PLIERS. 00 Crimp Grip Pliers A. Capacity Article No mm Pliers Applications
00 Crimp Grip Pliers for solder-free electrical connections quick release lever high contact pressure with minimum handforce using toggle lever transmission reproducible crimping quality with high tensile
Around the cable. Pressing and crimping.... convincing solutions
Around the cable Pressing and crimping... convincing solutions 33 INFO HUPcompact The new HUPcompact is a handy, compact crimp tool that will be available in 4 variations: HUPcompact HC01 for insulated
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION Brand C.K Product Range Ratchet crimping pliers Catalogue number 3678, 3681, 3682, 3683, 3697, 3698, 3852, 3676 & 3671 Date 17/08/2011 Range Description Professional quality ratchet
Crimping Tools. For Non-Insulated Terminals. For Pre-Insulated Terminals. For Closed End Connectors. Tool-Terminals Cross Reference.
Crimping Tools For Non-Insulated Terminals For Pre-Insulated Terminals For Closed End Connectors Tool-Terminals Cross Reference Nippon Tanshi offers crimping tools for all of our standard products. Our
Crimping Tools for Non - Insulated Terminals
Crimping Tools for Non - Insulated Terminals T-100 T-112 T-122 H-100N H-104 NH-12 NH-21 8 Crimping Tools for Non - Insulated Terminals T-100 Ratchet hand tool for crimping small (0.4mm 2 ) terminals. The
INSTALLATION TOOLS & ACCESSORIES
Industrial products we wholesale, you distribute INSTALLATION TOOLS & ACCESSORIES CRIMPERS Heat Shrink Terminals Ratcheted Crimper Heavy Duty Handheld Hexagon Crimper Eclipse Non-insulated Terminal Crimper
A. Capacity mm² AWG g A burnished insulated terminals and plug connectors with multi component grips
Crimp Grip Pliers 00 > for solder free electrical connections > quick release lever > high contact pressure with minimum handforce using toggle lever transmission > reproducible crimping quality with high
CABLE & WIRE CUTTERS HAND-HELD. LK-38A - Cable and wire cutter for CU/AL. LK-22A - Cable and wire cutter for CU/AL
CABLE & WIRE CUTTERS LK-22A - Cable and wire cutter for CU/AL HAND-HELD LK-38A - Cable and wire cutter for CU/AL Up to 25mm 2 Max Diameter: 160mm 15mm 0.19kg Not Suitable for cutting steel wire, armoured
Precision Crimp Wrenches
PRECISION CRIMP WRENCHES Precision Crimp Wrenches T Well balanced tool design for easy handling T Ergonomic handles for fatigue-free crimping TRatchet mechanism to secure completed crimping cycles 1) Place
THE CABLE ACCESSORY COMPANY THE BEST 30 YEARS
THE CABLE ACCESSORY COMPANY THE BEST 30 YEARS Tool Catalogue www.three-d.co.za Contents Cable and Wire Cutters (Hand-held) Wie Duct Cutters (Hand-held) Cable Tie Tensioning Tools Wire Strippers Pre-Insulated
Assortment boxes. PL1001 Elpress assortment box designed for electromechanical shops and service departments.
Assortment boxes PL00 Elpress assortment box designed for electromechanical shops and service departments. strong polypropylene box 29 partitions 000 pre-insulated terminals 0,5-6 mm² connector blocks
Tools. Standard Crimping Tools
Standard Crimping Standard Crimping CT15 for red, blue and yellow pre-insulated terminals. Indents on jaws identify which jaw has been used. Length 225mm. Weight 0.51kgs. UCT15 for un-insulated terminals
2018 MAY JUNE HOT DEALS!
2018 MAY JUNE HOT DEALS! WIRE & CABLE DEALS (WHILE SUPPLIES LAST!) CAT 6 CABLE WHITE OR BLUE UTP Cat.6 Cable Package Type: Reel in Box,, 1000 ft, Cert. & Standards : CMR,UL,C(UL (300-789BL Blue or 300-789WH
Reasons for reissue are provided in Section 6, REVISION SUMMARY. Figure 1. Figure 2
Each tool features outer and inner crimping dies (contained within the crimper and anvil jaws) and a CERTI CRIMP ratchet. The outer crimping dies crimp the insulation barrels of the splice and the inner
INTER PLANT STANDARD STEEL INDUSTRY
INTER PLANT STANDARD STEEL INDUSTRY IPSS CODE OF PRACTICE FOR END TERMINATION AND JOINTING OF CABLES BY COMPRESSION MEHOD AND SPECIFICATION FOR DIELESS HYDRAULICALLY OPERATED CRIMPING TOOL (First Revision)
Tools for other contacts Tools for FOC contacts Crimping machine TK-M Crimping machine TC-C
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.04 for contacts Han C... 99.06 for other contacts... 99.08 for FOC contacts... 99.10 for Han high current contacts... 99.12 Summary Han
HTF28 - HTF48 - HTF63. Crimping tool for spade plugs and spade sleeves. with open or pre-rolled crimping claw
Crimpin tools Crimpin tool for other contacts Positive blockin uarantees ood-quality crimpin. Release option in case of incorrect operation, With locator for exact positionin of the contacts. HTF28 - HTF48
Application Tooling Specification Sheet
Modular Crimp Head Order No. 63825-7170 Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63825-7100 FEATURES % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically
In-Course Honors Project - VDV Crimpers. By: Shyenne Horras
In-Course Honors Project - VDV Crimpers By: Shyenne Horras 2014 Who is Greenlee Textron? Textron Company Overview Greenlee is a business unit of the company Textron, who owns a number of other units such
Revisions to this application specification include: Updated document to corporate requirements Changed product types in table in Figure 6
This specification covers the requirements for application of PLASTI GRIP Terminals and Splices for commercial applications. The terminals and splices consist of precision formed metal wire barrel insulated
Heavy Head Hand Tools , , , and AUG 15 Rev K
Instruction Sheet 408-1261 Heavy Head Hand Tools 59239-4, 59239-8, 59287-2, and 525692 27 AUG 15 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered
CRIMPING TOOLS CRIMPER Cable Cross-Section 0,25-6,0mm² (AWG 24-10) Crimping Technic Terminal Insertion. Terminal / Connector Type
HAND TOOLS CRIMPING TOOLS CRIMPER 6-562113 0,25-6,0mm² (AWG 24-10) Crimping Technic Terminal Insertion Self-Adjustment Linear Front Automatic Terminal / Connector Type Crimping Profile Automatic adjustment
Section 2 Safety, Tools and Equipment, Shop Practices Unit 5 Tools and Equipment
Section 2 Safety, Tools and Equipment, Shop Practices Unit 5 Tools and Equipment Unit Objectives After studying this chapter, you should be able to: Describe hand tools used by the air-conditioning, heating,
Section 2 Safety, Tools and Equipment, Shop Practices Unit 5 Tools and Equipment. Unit Objectives 3/1/2012. General Hand Tools (1 of 6)
Section 2 Safety, Tools and Equipment, Shop Practices Unit 5 Tools and Equipment Unit Objectives After studying this chapter, you should be able to: Describe hand tools used by the air-conditioning, heating,
Photovoltaics / POF. Contents. Photovoltaics / POF. Photovoltaics / POF Introduction - Photovoltaics K.2. Crimping tool for photovoltaic contacts K.
Contents Introduction - Photovoltaics.2 Crimping tool for photovoltaic contacts.4 Introduction - POF.6 Tools for POF.8 1327490000 2013.1 Introduction - Photovoltaics CTF PV WM4 and CTX PV Practical crimping
Fiber Optic Products Catalog
Fiber Optic Products Catalog No epoxy, no polish, no crimp Two fibers in one ferrule MT-RJ Patch Panel Jack packages include: 6 MT-RJ Jacks 2 Actuator Tools 1 Fiber Guide 1 Icon Wheel Bend Limiting Boots
626 Pneumatic Tool System
Works with Existing AMP-Compatible Tools Catalog 12420 Revised 06-05 626 Pneumatic Tool System Effortless Alternative to Hand Crimping Maximize your productivity while minimizing your effortreplace your
Tools. Contents Tools for contacts Han D Tools for contacts Han E Tools for contacts Han C
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.04 for contacts Han C... 99.06 for other contacts... 99.08 for FOC contacts... 99.10 for Han high current contacts... 99.12 Summary Han
REVERSE CYCLE SOLAR PV-INVERTER
MALAYSIA S FIRST REVERSE CYCLE SOLAR PV-INVERTER AIR CONDITIONER AIR-CONDITIONER AND SOLAR pv PANELS Recommended Tools & Accessories for Installation & Maintenance Recommended Tools for Air Con Unit Installation
Crimping tools for D-Sub contacts Crimping tools for other contacts Crimping machine TC-C
Contents Page Hand crimping tools for Han standard contacts... 90.4 Pneumatic crimping tools for Han standard contacts... 90.9 Crimping tools for D-Sub contacts... 90.11 Crimping tools for Han TC high
Cables. Rubber and Control Cables H05VV-F. JZ flexible. F-CY-JZ - copper screened H07RN-F. Y-CY-JZ - copper screened, transparent H05RR-F
Cables 45 Rubber and Control Cables H05VV-F JZ 500 - flexible F-CY-JZ - copper screened H07RN-F Y-CY-JZ - copper screened, transparent H05RR-F SAT and Heat Reistant Cables Coaxial Cable SIF, SIF/GL, SIFF,
GREENLEE CUTTING, CABLE STRIPPING, CRIMPING
Manual Crimping Tool 6-Ton -Powered Crimping Tools EK22GL11 K425BG K425O 02064 Crimping Tool with D 3 and O die grooves K425BG 02065 Crimping Tool with D 3 and BG die grooves Designed for crimping a wide
You work hard on your panel. we work hard in your panel. PRODUCTS FOR
You work hard on your panel we work hard in your panel. PRODUCTS FOR 2 PRODUCTS FOR You simply won t find better panel components. Thomas & Betts has everything you need to make your panel better than
You are streamlining your manufacturing processes Our automatic machines optimise installation times Let s connect.
You are streamlining your manufacturing processes Our automatic machines optimise installation times Let s connect. Connectivity and electrical installation A high degree of automation for standardised
626 Pneumatic Tool System The Effortless Alternative to Hand Crimping
The Effortless Alternative to Hand Crimping Fast Facts Effortless crimping for a broad range of terminals, either bench-mounted or hand-held for working in cramped quarters. Lightweight tool eliminates
PRODUCTS FOR Wiring Duct Power & Grounding Connectors Fastening Products Control Termination Identification Solutions
PRODUCTS FOR Head Office 700 Thomas Avenue Saint-Jean-sur-Richelieu, Quebec J2X 2M9 Tel.: (450) 347-5318 Fax: (450) 347-1976 Wiring Duct Power & Grounding Connectors Atlantic Region Regional Sales Offices
Read these instructions thoroughly before crimping any terminals.
Figure 1 This instruction sheet covers the application and maintenance procedures for Pneumatic Crimping Head Assembly 314991 1. The crimping head assembly is designed for use in Pneumatic Tool 69015 to
Heavy Head Hand Crimping Tools (HHHT) [ ]
![Heavy Head Hand Crimping Tools (HHHT) [ ]](/thumbs/82/85640098.jpg "Heavy Head Hand Crimping Tools (HHHT) [ ]")
Heavy Head Hand Crimping Tools (HHHT) 220015-[ ] Instruction Sheet 408-2331 19 APR 12 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
HYDRAULIC CRIMPING TOOL
HYDRAULIC CRIMPING TOOL HT 120 Crimping force kn 120 488 138 5,7 This lightweight and self contained tool will accept the semi-circular slotted dies, coon to most 130 kn tools. It is particularly suitable
Christmas SALE UNPRICED
2018 Christmas SALE UNPRICED Quality ISO 9001 Powering the Australian Electrical Industry Since 1982 CONTENTS 4 6 8 9 10 11 12 14 15 TOOLS CUT, STRIP & CRIMP PVC EXTRUDED & MOULDED PRODUCTS PRE-TERMINATED
Wire and Cable. For more information on these Tyco Electronics products, visit the following website:
26 Wire and Cable Raychem High Performance Wire and Cable....26-2 to 26-4 Madison Cable Products...................26-5 to 26-7 Reference the following cables in Section 15 of this catalog: Premises Networking
Application Tooling Specification Sheet
Modular Crimp Head Order No. 63827-5470 Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63827-5400 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomically
Installation Procedure for D-200 series Shielded Cable Splice Kits with MiniSeal Crimp Primary Splices
. Page: Page 1 of 7 Installation Procedure for D-200 series Shielded Cable Splice Kits with MiniSeal Crimp Primary Splices 1.0 Scope This standard contains the procedures for making environment resistant
Single- Action Double- Action
Single- Action Double- Action Instruction Sheet (SADA) Hand Tools 45730, 408-1532 46467, 46468, 46469, and 46470 04 AUG 09 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged
CRIMPERS AND CUTTERS. Information. CH Range. SC Range. BC Range. BC Accessories. HCH Range. CT Range. HWC Range. HSWC Range. HWRC Range.
RIMPERS ND UTTERS Information General information on crimping tools 122 H Range able crimping heads s 123 124 S Range Selfcontained cable crimping tools s 1 126 Range attery operated cable crimping tools
Range of Application: For Non-insulated cable Terminal Lug Capacity:1.5-10mm2 AWG:16-8AWG Length:220mm Weight:0.49Kg. Length:220mm Weight:0.
Crimping pliers adopt the principle of using the best leverage to effectively handle the design. Although the short and compact structure, especially in the larger horizontal pressure to the cross section
TETRA-CRIMP* Hand Crimping Tool
TETRA-CRIMP* Hand Crimping Tool 59824-1 Instruction Sheet 408-2823 12 JUN 14 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools
INSTALLATION INSTRUCTIONS FOR 7330C740 FLUSH MOUNT CEILING ASSEMBLY
INSTALLATION INSTRUCTIONS FOR 7330C740 FLUSH MOUNT CEILING ASSEMBLY TABLE OF CONTENTS Warnings...3 Package Contents...3 General Information...3 Supply Ducting And Registers...3 Routing 115 VAC Wiring...5
MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER. Industrial Equipment Rental & Service
MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER Industrial Equipment Rental & Service Bending Classic Electric Bender for Conduit & Pipe Item #555C Electric Bender Item #854DX Bend 1/2" to 2" RIGID/IMC/EMT
Application Tooling Specification Sheet
Modular Crimp Head Order No. 63827-5770 FEATURES Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63827-5700 A full cycle ratcheting hand tool ensures complete crimps Ergonomically
Level V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline
![Level V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline](/thumbs/87/96384356.jpg "Level V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline")
Level V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline Product Facts Termination of discrete wire sizes 26-22 AWG [0.12-0.3 mm 2 ] as well as jacketed cable and bonded ribbon cable (conductors separated)
WIRE & CABLE. Wire & Cable... Wire Accessories...
Wire &... Wire Accessories... LINE CARD (9N) Arlington (GI) GRI (WG) Genesis (H2) ICC (Int l Conn & Corp) (RM) Remee (0E) W Box Technologies (WP) West Penn 1.800.233.6261 adiglobal.com/us New Vendor *
Genesis Cable Audio/Video Product Catalog DELIVERING THE ULTIMATE AUDIO/VIDEO EXPERIENCE
Genesis Cable Audio/Video Product Catalog DELIVERING THE ULTIMATE AUDIO/VIDEO EXPERIENCE Bring It Home Our wide range of application-specific cable ensures optimal performance in residential or commercial
Electricians & Plumbing Tools
Electricians & Plumbing Tools - 315 - Electric Glue Guns Electric Glue Guns Antidrip Silicon Tip Automatic Finger Lever Feed T20102 5-20W Pistol Grip Mini Glue Gun Trigger feed mechanism controls glue
CUTTING & CRIMPING 12 Depliant Cutting Crimping Tools.indb :45
CUTTING & CRIMPING 2 QUALITY, THE SUPERIOR GOAL INTERCABLE STANDS FOR HIGH QUALITY Products and service! An efficient organisation, as well as a quality management according to the EN ISO 9001 international
Renewable Energy. System Solutions
System Solutions Locally manufactured to global standards HellermannTyton offers a tailor made String Combiner Box (SCB) manufacturing service. Based on the customer requirements HellermannTyton will design
SECTION ELECTRICAL GENERAL PROVISIONS
PART 1 GENERAL 1.01 SECTION INCLUDES A. General provisions for Electrical Systems B. Wire and cable for 600 volts and less. C. Wiring connectors. D. Electrical tape. E. Heat shrink tubing. F. Wire pulling
WIRE & CABLE. Wire & Cable... Wire Accessories...
Wire &... Wire Accessories... LINE CARD (9N) Arlington (GI) GRI (WG) Honeywell Cabling / Genesis (H2) ICC (Int l Conn & Corp) (RM) Remee (0E) W Box Technologies (WP) West Penn 1.800.233.6261 adiglobal.com/us
Wire & Cable Termination
If you need to cut, crimp or strip, Greenlee has the tool from manual-style to battery-powered. Use our cable cutter selection guide and cross-reference charts to choose the right high-quality, handheld
JUL 17 Rev C
Hydraulic Crimping Head, PN 1752787-1 Instruction Sheet 408-8914 31 JUL 17 Rev C 1. INTRODUCTION Products Crimped AMPLI-BOND* and PLASTI-GRIP* Terminals TERMINYL* Terminals and Splices Pre-Insulated AMPOWER*
CableReady
CableReady www.ppc-online.com 1 PPC - A Belden Brand is a manufacturing company serving the security, cable TV, home entertainment, commercial and broadcast industries. PPC Belden is recognized worldwide
Mechman 170-Amp Alternator Cable Kit (220013)
an ISO 900:2008 Registered Company Mechman 70-Amp Alternator Cable Kit (22003) 8865 Goll St. San Antonio, TX 78266 Phone: 20-654-77 Fax: 20-654-33 www.vintageair.com 90723 REV B 07/29/6, PG OF 8 Table
Mechanical Crimping Tool JT-150 Instruction Manual
500.630 Mechanical Crimping Tool JT-150 Instruction Manual Due to continuing improvements, actual product may differ slightly from the product described herein. General Safety Rules To work in safe conditions
Pushbutton Switches. Nylon. Specifications. Heavy Duty, Metal Plunger. Specifications S13 S12
Nylon S13.250 (6.35).375 (9.35) Dia Heavy Duty 6 Wire Leads Both Bushing & Bracket are Made of Nylon.565 (14.35) 1.000 (25.4).250 (6.35) Travel.540 (13.72) Dia.776 (19.71) 1.120 (28.45) 1.308 (33.22).540
JOE SCHROEDER Apprentice Electrician
JOE SCHROEDER Apprentice Electrician From battery to ratchet, if it needs to be cut or crimped, Greenlee s got the tool. A Greenlee exclusive the Gator-Plus battery-powered 4-ton crimping tool brings tons
Mounting plates for data connection caps
Mounting plates for data connection caps Ref.-No. 54... 1 Ref.-no. 54 OCS... 2 Ref.-no. 54 SC... 3 Ref.-no. 54-2 SC... 3 Ref.-no. 54 XLR-D... 4 Ref.-no. 54 XLR-S... 4 Ref.-no. 54-1 ACS... 5 Ref.-no. 54-1
Genesis Cable Audio/Video Product Catalog DELIVERING THE ULTIMATE AUDIO/VIDEO EXPERIENCE
Genesis Cable Audio/Video Product Catalog DELIVERING THE ULTIMATE AUDIO/VIDEO EXPERIENCE Bring It Home Our wide range of application-specific cable ensures optimal performance in residential or commercial
Hydraulic Crimping Head, PN
Hydraulic Crimping Head, PN 1673672-1 Instruction Sheet 408-8910 14 JUL 17 Rev C PROPER USE GUIDELINES Cumulative trauma disorders can result from the prolonged use of manually powered hand tools. Hand
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 28 ELEC. SAFETY & SECURITY SECTION CONDUCTORS AND CABLES FOR ELECTRONIC SAFETY AND SECURITY
SECTION 280513 - CONDUCTORS AND CABLES FOR ELECTRONIC SAFETY AND SECURITY PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Coaxial cabling. 2. RS-232 cabling. 3. RS-485 cabling. 4. Low-voltage control
Hydraulic Crimping Heads and
Hydraulic Crimping Heads 58422-1 and 2161730-1 Instruction Sheet 408-9535 30 MAY 17 REV D 1. INTRODUCTION Figure 1 This instruction sheet covers application, inspection and maintenance procedures for Crimping
YA TOOLS. ABCD Pneumatic hand tools. Crimping tools/machines
Crimping tools/machines ABC Pneumatic hand tools YA TLS These pneumatic hand tools operate on compressed air ranging from 75 to 5 PSI (5.0 to 6.0 kg/cm ){500 to 600kPa} for quick and accurate crimping,
STEAMPRO. Steam Generator Troubleshooting and Service Guide
STEAMPRO Steam Generator Troubleshooting and Service Guide TABLE OF CONTENTS Page PREFACE... 1 I. STEAMPRO STEAM GENERATOR SYSTEM...2 II. PLUMBING AND ELECTRICAL...3-4 III. SYSTEM OVERVIEW... 5-10 IV.
Eldex Column Heater. Operator s Manual
Eldex Eldex Column Heater Operator s Manual Eldex Laboratories, Inc. 30 Executive Court Napa, CA 94558 Tel: (707) 224-8800 Fax: (707) 224-0688 www.eldex.com Rev. B: 081700 2000Eldex Laboratories, Inc.
SECTION (16140) - WIRING DEVICES
SECTION 26 27 26 (16140) - WIRING DEVICES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Receptacles, Connectors, Switches, and Finish Plates. B. Related Sections: 1. Section 00 31 13.43 (00370) -
CRIMPING STEP-BY-STEP INSTRUCTIONS DEUTSCH DT. Detailed application instructions for crimping with the HELLA Heavy Duty System
CRIMPING STEP-BY-STEP INSTRUCTIONS DEUTSCH DT Detailed application instructions for crimping with the HELLA Heavy Duty System Heavy Duty Tool Case Composition example The modular design of HELLA s Heavy
PRESENTING OUR NEW RANGE FROM PLATINUM TOOLS
PRESENTING OUR NEW RANGE FROM PLATINUM TOOLS TERMINATION GUIDE Prep and Crimping ezex-rj45 Connectors Using the EXO Crimp Frame 1. Remove cable jacket 5. To Unlock squeeze leaving 1 to 1 1/2 of handles
MobileCrimp Crimper Die Selection Table For MegaCrimp. MobileCrimp. Die Sets (ordered separately) Digital Dial Control
MobileCrimp 4-20 Crimper This lightweight, versatile crimper is powerful enough to crimp up to 1-1/4" four spiral-wire hose Weighing approximately 57 pounds, this new field crimper combines the latest
RK12ID Remote Dieless Crimping Tool
INSTRUCTION MANUAL Serial Number RK12ID Remote Dieless Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
CERTI CRIMP Hand Crimping Tool is used to crimp the closed end splices onto the wire sizes listed in Figure 1.
Figure 1 CERTI CRIMP Hand Crimping Tool 48087 is used to crimp the closed end splices onto the wire sizes listed in Figure 1. Reasons for reissue of this instruction sheet are provided in Section 7, REVISION
HH80C HYDRAULIC CRIMP TOOL
HH80C HYDRAULIC CRIMP TOOL DATASHEET SEE PAGE 8 FOR IMPORTANT INFORMATION CONCERNING LIMITED WARRANTY, AND LIMITATION OF LIABILITY INTRODUCTION: The HH80C is a hand actuated hydraulic crimp tool designed
Hydraulic Crimping Head, PN 69069
Hydraulic Crimping Head, PN 69069 Instruction Sheet 408-1745 31 JUL 17 Rev F 1. INTRODUCTION Figure 1 This instruction sheet covers application, inspection and maintenance procedures for DYNA-CRIMP* Crimping
SECTION CONDUCTORS AND CABLES FOR ELECTRONIC SAFETY AND SECURITY
SECTION 280513 CONDUCTORS AND CABLES FOR ELECTRONIC SAFETY AND SECURITY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
This instruction sheet covers the Hand Crimping Tools listed in Figure 1, which are used to crimp the terminal types listed in Figure 2.
Figure 1 This instruction sheet covers the Hand Crimping Tools listed in Figure 1, which are used to crimp the terminal types listed in Figure 2. Reasons for reissue are provided in Section 9, REVISION
Tool Storage Tool Modules
Tool Storage Tool Modules TOOL KITS IN ROLLER CABINETS Tool System Solutions from RS for Garages, Factories and Workshops Our revised program consists of various combinations of tools for users in different
FULL PORT BALL SWEAT X PEX W/WASTE /2" PEX X 1/2" SWEAT BALL VALVE W/WASTE & LEVER HANDLE
PRODUCT GROUP # 5 PEX-READY VALVES, TOOLS & ACCESSORIES - valves FULL PORT BALL VALVES w/waste (BC) 4490 /2" FULL PORT BALL VALVE W/ WASTE PEX X PEX 440075 3/4" FULL PORT BALL VALVE W/ WASTE PEX X PEX
R UNIT 5. Tools of the Trade
5 ools of the rade opics for this nit Wall plates onnectors able Pathways ools of the trade acks and enclosures Patch panels Horizontal able able uns between cross connect and wall jack pproved cable 100
Weight / 003 -Z M5 (SUCOFEED ¼ HF) bulk 10 pcs g / 5.25 oz.
Cable Connectors Straight Cable Plugs (male) > cable entry clamp > degree of protection IP 68 11 716-50-5-4 / 003 -Z 23003412 M5 (SUCOFEED ¼ HF) bulk 10 pcs. 27297 149 g / 5.25 oz. > for Sucoform cables
Cutting Tools. Hydraulic cutting heads Hydraulic drive units Hydraulic systems
Cutting Tools Hydraulic cutting heads Hydraulic drive units Hydraulic systems Cutting tools Hydraulic cutting heads SDG 85 SDG 85, SDG 105 Hydraulic cutting heads max. Ø 85 mm and Ø 105 mm Cut armoured
Power Tower OWNER'S MANUAL
Power Tower OWNER'S MANUAL Model No. PTG Recreation Supply Inc. P.O. BOX BODYCRAFT is a division of Recreation Supply Sunbury, OH 7 MB BEFORE YOU BEGIN Congratulations and thank you for selecting the POWER
Data Sheet. Self regulating process heating tapes RS stock numbers ,
Data Pack K Issued March 1997 232-3333 Data Sheet Self regulating process heating tapes RS stock numbers 379-889, 379-974 The information contained within this sheet regarding applications and installation
Tool Storage. Tool Storage TOOL CHEST 7 DRAWER TOOL TROLLEY TOOL CHEST 8 DRAWER TOOL TROLLEY 5 CANTILEVER TOOL CHEST 3 DRAWER TOOL CHEST
Tool Storage Tool Storage 7 DRAWER TOOL TROLLEY PVC handle for comfortable grip TOOL CHEST TOOL CHEST 9507 8 860 950 4" 360 50 5 2.5 9502 9503A 7" 20" 428 508 77 28 84 243 4.3 6.3 Screwdriver compartment
commercial-type cabling and connectivity products into the industrial landscape.
Product Bulletin PB 315 Belden DataTuff Industrial Ethernet Connectivity, Tools & Accessories Belden DataTuff Cat 6 and 5e IP67/IP20 Cord Sets, IP67 Modular Jacks, IP67 Plug Kits, Cabling Accessories and
Navy Shipboard Fiber Optics Recommended Tools List
0001 125 um Connector Cleaning Wire (3 ea) w/container Fibertron Corp. 9505 01 376 9398 F1-8265 0001 125 um Connector Cleaning Wire (3 ea) w/container 9505 01 376 9398 0700-3210 0001 125 um Connector Cleaning
Tools. Contents Tools for contacts Han D Tools for contacts Han E Tools for contacts Han C
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.03 for contacts Han C... 99.04 for Han-Modular and other contacts... 99.05 for FOC contacts... 99.06 Summary Han Crimping tools... 99.07
350 Pine Street, Suite 720 Edison Plaza Beaumont, TX Fax
350 Pine Street, Suite 720 Edison Plaza Beaumont, TX 77701 409.866.7196 409.866.1745 Fax Project: Addendum No. 1 FIRE STATION #2 NORTH END CITY OF BEAUMONT 4990 HELBIG ROAD, BEAUMONT, TEXAS BID PROPOSAL: