CRIMPING TOOLS CRIMPER Cable Cross-Section 0,25-6,0mm² (AWG 24-10) Crimping Technic Terminal Insertion. Terminal / Connector Type
|
|
|
- Hester Gilmore
- 5 years ago
- Views:
Transcription
1 HAND TOOLS
2 CRIMPING TOOLS CRIMPER ,25-6,0mm² (AWG 24-10) Crimping Technic Terminal Insertion Self-Adjustment Linear Front Automatic Terminal / Connector Type Crimping Profile Automatic adjustment to the wire cross-sections Continuous precision crimp over the full length of the ferrule Full cycle ratchet operation (with release) assuring a complete crimp Perfect fit to hand ergonomics Patented crimping technology 2
3 CRIMPING TOOLS CRIMPER F 10 R Crimping Technic Terminal Insertion Self-Adjustment 0,08-10 mm² (28-8 AWG) Linear Side Automatic Terminal / Connector Type Crimping Profile Crimping of wire end ferrules with or without insulation High-precision crimping results Ergonomically designed soft handles with non-slip grip material for comfortable working. 3
4 CRIMPING TOOLS CRIMPER F 10 L Crimping Technic Terminal Insertion 0,5-10 mm² (20-8 AWG) Linear Front Terminal / Connector Type Crimping Profile Automatic adjustment to the wire cross-sections High precision crimping Releasable ratchet ensures the complete crimping process Ergonomically designed soft handles with non-slip grip material for comfortable working. 4
5 CRIMPING TOOLS CRIMPER N 16 H Crimping Technic Terminal Insertion 0,08-16 mm² Linear Side Terminal / Connector Type Crimping Profile Automatic adjustment between 0,08-16 mm² Required hand force reduced by 30% Hexagonal crimping Releasable ratchet ensures the complete crimping process Ergonomically designed soft handles with non-slip grip material for comfortable working. 5
6 CRIMPING TOOLS CRIMPER N 16 L ,14-16,0 mm² (26-20;18-16; 14; 12; 10; 8; 6 AWG) Terminal / Connector Type Crimping Profile Releasable ratchet ensures the complete crimp process Special-designed ergonomic handles prevents slipping Ergonomically designed soft handles with non-slip grip material for comfortable working. 6
7 CRIMPING TOOLS CRIMPER N 50 L ,0-50,0 mm² (8;6;4;2;1 AWG) Terminal / Connector Type Crimping Profile Releasable ratchet ensures the complete crimping process Ergonomically designed soft handles with non-slip grip material for comfortable working. 7
8 CRIMPING TOOLS CRIMPER IT 6 S Crimping Range Red 0,5-1,0 ( AWG) Blue 1,5-2,5 (16-14 AWG) Yellow 4,0-6,0(12-10 AWG) Terminal / Connector Type Crimping Profile Red/blue/yellow round type DIN cable lugs, pin cable lugs, female FASTON cable lugs, male FASTON cable lugs, male terminals, cable joints Ergonomically designed soft handles with non-slip grip material for comfortable working. 8
9 CABLE STRIPPERS STRIPPER ,2 mm²-6 mm² Terminal Insertion Front Automatic adjustment to the wire cross-sections High precision crimping Ergonomically designed soft handles with non-slip grip material for comfortable working. 9
10 CABLE STRIPPERS STRIPPER Terminal Insertion 0,03-16 mm² Front Striping and cutting of stranded and solid wires with PVC insulation of 0,03 to 16 mm² Self-adjustment for all cross-sections with POWER PLUS feature Adjustable stripping length 3-21 mm Ergonomically designed soft handles with non-slip grip material for comfortable working. SPARE KNIFE SET
11 CABLE STRIPPERS STRIPPER 28 C Cable Diameter Ø4,5 29 mm Cable stripping as lane with patented stripping mode Maximum performance with less effort High strength special steel 11
12 CABLE CUTTING TOOLS CUTTER ,03 to 70 mm² For burr-free cutting of standard wire cables Wide application range from 0,03 up to 70 mm² Blades with serrated edge Low hand force Soft-grips 12
13 CABLE CUTTING TOOLS CUTTER Solid: max. 25/15 mm AL/CU diameter Stranded: max. 32 mm diameter or 300 mm² High tempered special steel Locking lever Step-wise and burr-free cutting Unlocking possibility in every position Hand tool model Ergonomically designed soft handles with non-slip grip material for comfortable working. 13
14 HAND TOOL SET STRIP & CRIMP SET STRIPPER Terminal Insertion 0,03-16 mm² Front CRIMPER N 16 H Crimping Technic Terminal Insertion 0,08-16 mm² Linear Side CRIMPER N 16 H STRIPPER
15 WIRING DUCT CUTTING TOOLS KKMR Burr-free cutting of wiring ducts and wiring duct covers Straight or 45º cutting options Equal force distribution across blades helps homogenous cutting Cutting up to 100 mm width Cover cutting Burr-free cutting Non-blunting knife Length adjustment guide Cutting up to 125 mm width Cutting Type Max. Width Length Adjustment KMK Straight 125 mm 100 cm RAIL CUTTING TOOL Cutting Thickness Cutting Capacity KRKM mm 7.5x35 mm 15x35 mm Tij Ø8mm 3 different cutting slots Clean Cut Lossless cutting Non-blunting knife Length adjustment guide Length Adjustment 100 cm 15
16 SCREWDRIVERS NON-ISOLATED SCREWDRIVERS Order. No. Type Description KT1 2,5x75 - Flat KT2 3,0x100 - Flat KT3 3,5x100 - Flat KT4 4,0x125 - Flat KT5 5,5x150 - Flat KT6 6,5x200 - Flat ISOLATED SCREWDRIVERS Order. No. Type Description IKT 1 2,5x75 - Flat IKT 2 3,0x100 - Flat IKT 3 3,5x100 - Flat IKT 4 4,0x125 - Flat IKT 5 5,5x150 - Flat IKT 6 6,5x200 - Flat MAINS TESTER Order. No. Type Description KK mm KK mm. 16
17 KLEMENS TORNAVİDALARI Factory Kızılüzüm Mah. Kemalpaşa Kızılüzüm Cad. No: Kemalpaşa - Izmir / TURKEY Tel : Fax: International Sales Office Domestic Sales Office South East Europe Middle East Caucasus South Africa Kızılüzüm Mah. Kemalpaşa Kızılüzüm Cad. No: Kemalpaşa - Izmir / TURKEY Tel : Fax: Maslak Mah. Ahi Evran Cad. Ata Center İş Merkezi No: 9 Kat: 4 Maslak, Sarıyer - Istanbul / TURKEY Tel : Fax: OVERSEAS OFFICES Europe Tel: Ground Floor Autoparks House Cross Road and 13 Park Crescemt Glenhazel High North 2182, Johannesburg, South Africa Tel: GCC & India & Pakistan APAC Ukraine Z Building Z 57 Saif Zone, Sharjah Tel : Gsm: Rm. 1707, No. 218, Hengfeng Road, Morden Traffic Business Building, Zhabei District, Shanghai Tel : Fax: Gsm: A, Yaroslava Ivashkevicha Str.Office , Kiev Tel: Indonesia Gsm: Gsm: Thailand Gsm: Colombia (LATAM) Gsm: Mexico Revision No: Gsm: EL ALETLERI BROSUR EN 17
Tools. Contents Tools for contacts Han D Tools for contacts Han E Tools for contacts Han C
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.04 for contacts Han C... 99.06 for other contacts... 99.08 for FOC contacts... 99.10 for Han high current contacts... 99.12 Summary Han
PRE-INSULATED CRIMPING TOOLS. YYT-1 - Ratchet crimping tool for pre-insulated terminals
PRE-INSULATED YYT-1 - Ratchet crimping tool for pre-insulated terminals 254mm 0.603kg AWG 20-11 AP-03C - Ratchet energy saving crimping tool for pre-insulated terminals 0.55kg AWG 20-10 Continuous crimping
Tools for other contacts Tools for FOC contacts Crimping machine TK-M Crimping machine TC-C
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.04 for contacts Han C... 99.06 for other contacts... 99.08 for FOC contacts... 99.10 for Han high current contacts... 99.12 Summary Han
Tools. Contents Tools for contacts Han D Tools for contacts Han E Tools for contacts Han C
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.03 for contacts Han C... 99.04 for Han-Modular and other contacts... 99.05 for FOC contacts... 99.06 Summary Han Crimping tools... 99.07
Around the cable. Pressing and crimping.... convincing solutions
Around the cable Pressing and crimping... convincing solutions 33 INFO HUPcompact The new HUPcompact is a handy, compact crimp tool that will be available in 4 variations: HUPcompact HC01 for insulated
Cutting Tools. Hydraulic cutting heads Hydraulic drive units Hydraulic systems
Cutting Tools Hydraulic cutting heads Hydraulic drive units Hydraulic systems Cutting tools Hydraulic cutting heads SDG 85 SDG 85, SDG 105 Hydraulic cutting heads max. Ø 85 mm and Ø 105 mm Cut armoured
THE CABLE ACCESSORY COMPANY THE BEST 30 YEARS
THE CABLE ACCESSORY COMPANY THE BEST 30 YEARS Tool Catalogue www.three-d.co.za Contents Cable and Wire Cutters (Hand-held) Wie Duct Cutters (Hand-held) Cable Tie Tensioning Tools Wire Strippers Pre-Insulated
INSTALLATION TOOLS & ACCESSORIES
Industrial products we wholesale, you distribute INSTALLATION TOOLS & ACCESSORIES CRIMPERS Heat Shrink Terminals Ratcheted Crimper Heavy Duty Handheld Hexagon Crimper Eclipse Non-insulated Terminal Crimper
CABLE & WIRE CUTTERS HAND-HELD. LK-38A - Cable and wire cutter for CU/AL. LK-22A - Cable and wire cutter for CU/AL
CABLE & WIRE CUTTERS LK-22A - Cable and wire cutter for CU/AL HAND-HELD LK-38A - Cable and wire cutter for CU/AL Up to 25mm 2 Max Diameter: 160mm 15mm 0.19kg Not Suitable for cutting steel wire, armoured
Crimping Tools for Non - Insulated Terminals
Crimping Tools for Non - Insulated Terminals T-100 T-112 T-122 H-100N H-104 NH-12 NH-21 8 Crimping Tools for Non - Insulated Terminals T-100 Ratchet hand tool for crimping small (0.4mm 2 ) terminals. The
CRIMPING PLIERS. 00 Crimp Grip Pliers A. Capacity Article No mm Pliers Applications
00 Crimp Grip Pliers for solder-free electrical connections quick release lever high contact pressure with minimum handforce using toggle lever transmission reproducible crimping quality with high tensile
Renewable Energy. System Solutions
System Solutions Locally manufactured to global standards HellermannTyton offers a tailor made String Combiner Box (SCB) manufacturing service. Based on the customer requirements HellermannTyton will design
CRIMPERS CRIMPERS. Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com www.eclipsetools.com All dies on pgs3,4, 5 & 6 fit each of these frames Ergo-Lunar Crimp Frame Ergo-Lunar
Servo Cable Connector Crimping Guide
Crimping Tool head showing the slots and markings The Crimping Tool showing the smaller slot (marked 24-28), the larger slot (marked 20-24) and the wire cutter Left or right-hand use: Although the crimping
Application Tooling Specification Sheet
Modular Crimp Head Order No. 63825-7170 Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63825-7100 FEATURES % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically
A. Capacity mm² AWG g A burnished insulated terminals and plug connectors with multi component grips
Crimp Grip Pliers 00 > for solder free electrical connections > quick release lever > high contact pressure with minimum handforce using toggle lever transmission > reproducible crimping quality with high
CRIMPING PLIERS. 00 Crimp Grip Pliers A. EAN mm Pliers Applications. Capacity. Article No.
00 Crimp Grip Pliers for solder-free electrical connections quick release lever high contact pressure with minimum handforce using toggle lever transmission reproducible crimping quality with high tensile
Crimping tools for D-Sub contacts Crimping tools for other contacts Crimping machine TC-C
Contents Page Hand crimping tools for Han standard contacts... 90.4 Pneumatic crimping tools for Han standard contacts... 90.9 Crimping tools for D-Sub contacts... 90.11 Crimping tools for Han TC high
SERVICE MANUAL FOR MODEL RM-26
SERVICE MANUAL FOR MODEL RM-26 REQUIRED TOOLS CORDLESS DRILL DRIVE CUTTING TUBING OPEN WRENCH OF 1/2 RATCHET WITH SOCKET OF 7/16 SCREWDRIVER SET WITH SOCKET OF 9/32 VISE GRIP PIERCING VALVE WATCHER SLOTTED
Tools & Test Equipment
Tools & Test Equipment With such a large complement of connectors to offer, it is only fitting that you ll find an equally complete offering of Emerson termination tools.this line of products includes
OPERATING INSTRUCTIONS
HTV10 Hand Tool, Tandem Spring, Document number: TE Connectivity (TE) PN: 6-744017-4 Language: EN (translation of the original German version) Contents 1 Revisions... 1 1.1 Revision history... 1 2 Introduction...
CUTTING & CRIMPING 12 Depliant Cutting Crimping Tools.indb :45
CUTTING & CRIMPING 2 QUALITY, THE SUPERIOR GOAL INTERCABLE STANDS FOR HIGH QUALITY Products and service! An efficient organisation, as well as a quality management according to the EN ISO 9001 international
Crimping Tools. For Non-Insulated Terminals. For Pre-Insulated Terminals. For Closed End Connectors. Tool-Terminals Cross Reference.
Crimping Tools For Non-Insulated Terminals For Pre-Insulated Terminals For Closed End Connectors Tool-Terminals Cross Reference Nippon Tanshi offers crimping tools for all of our standard products. Our
Reasons for reissue are provided in Section 6, REVISION SUMMARY. Figure 1. Figure 2
Each tool features outer and inner crimping dies (contained within the crimper and anvil jaws) and a CERTI CRIMP ratchet. The outer crimping dies crimp the insulation barrels of the splice and the inner
FOREWORD. Only 3 connector parts makes the assembly process both simple and efficient. CONTENTS. 1. Preparation and tools required for assembly
FOREWORD Thank you for purchasing FOCI s pre-assembled QF and QP (FC/APC) Optical Fiber Connectors. We are confident that our excellent manufacturing procedures and stringent quality control guarantee
Optimise wire processing A comprehensive range of products for the workshop
Optimise wire processing A comprehensive range of products for the workshop Forward-looking process optimisation Cutting to length, stripping and crimping the faster and more accurately these routine tasks
Tool Storage Tool Modules
Tool Storage Tool Modules TOOL KITS IN ROLLER CABINETS Tool System Solutions from RS for Garages, Factories and Workshops Our revised program consists of various combinations of tools for users in different
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION Brand C.K Product Range Ratchet crimping pliers Catalogue number 3678, 3681, 3682, 3683, 3697, 3698, 3852, 3676 & 3671 Date 17/08/2011 Range Description Professional quality ratchet
Application Tooling Specification Sheet
Modular Crimp Head Order No. 63827-5470 Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63827-5400 FEATURES A full cycle ratcheting hand tool ensures complete crimps Ergonomically
You are streamlining your manufacturing processes Our automatic machines optimise installation times Let s connect.
You are streamlining your manufacturing processes Our automatic machines optimise installation times Let s connect. Connectivity and electrical installation A high degree of automation for standardised
SERVICE MANUAL FOR MODEL RM-10
SERVICE MANUAL FOR MODEL RM-10 REQUIRED TOOLS CORDLESS DRILL COPPER CUTTING TUBE 1/2 OPEN WRENCH SOLDERING IRON SCREWDRIVER SET WITH 9/32 SOCKET VISE GRIP PIERCING VALVE PRECISION FLAT BLADE SLOTTED SCREWDRIVER
Quick lnterchange Ratcheting Crimper Frame. Ratching release trigger
CP-3005F Quick lnterchange Ratcheting Crimper Frame Quick Die Change without tools : AISI 4140 HRC43 ±2 (Die not included) Interchangeable die with quick release trigger : S50C HRC: 45 ±3 Crimping pressure
Precision Crimp Wrenches
PRECISION CRIMP WRENCHES Precision Crimp Wrenches T Well balanced tool design for easy handling T Ergonomic handles for fatigue-free crimping TRatchet mechanism to secure completed crimping cycles 1) Place
HYDRAULIC CRIMPING TOOL
HYDRAULIC CRIMPING TOOL HT 120 Crimping force kn 120 488 138 5,7 This lightweight and self contained tool will accept the semi-circular slotted dies, coon to most 130 kn tools. It is particularly suitable
T.Sawano H.Segawa N.Tsuji H.Tomimoto
J.S.T. Mfg. Co., Ltd. Osaka Engineering Center 3-9-23 Takejima, Nishiyodogawa-ku, Osaka, 555-0011 JAPAN Fax (06) 6476-2100 Tel. (06) 6474-1705 Title of Document: Title Subject: Revision Page 1/17 Date
Application Tooling Specification Sheet
Modular Crimp Head Order No. 63827-5770 FEATURES Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63827-5700 A full cycle ratcheting hand tool ensures complete crimps Ergonomically
SERVICE MANUAL FOR MODEL RM-49
SERVICE MANUAL FOR MODEL RM-49 REQUIRED TOOLS CORDLESS DRILL DRIVE CUTTING TUBING OPEN WRENCH OF 1/2 RATCHET WITH SOCKET OF 7/16 SCREWDRIVER SET WITH SOCKET OF 9/32 VISE GRIP PIERCING VALVE WATCHER SLOTTED
Tools. Standard Crimping Tools
Standard Crimping Standard Crimping CT15 for red, blue and yellow pre-insulated terminals. Indents on jaws identify which jaw has been used. Length 225mm. Weight 0.51kgs. UCT15 for un-insulated terminals
MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER. Industrial Equipment Rental & Service
MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER Industrial Equipment Rental & Service Bending Classic Electric Bender for Conduit & Pipe Item #555C Electric Bender Item #854DX Bend 1/2" to 2" RIGID/IMC/EMT
Cables. Rubber and Control Cables H05VV-F. JZ flexible. F-CY-JZ - copper screened H07RN-F. Y-CY-JZ - copper screened, transparent H05RR-F
Cables 45 Rubber and Control Cables H05VV-F JZ 500 - flexible F-CY-JZ - copper screened H07RN-F Y-CY-JZ - copper screened, transparent H05RR-F SAT and Heat Reistant Cables Coaxial Cable SIF, SIF/GL, SIFF,
Standard and Customized Hand Tool Kits
Standard and Customized Hand Tool Kits Application Tooling and Equipment Portfolio Applicators Board Processing Equipment Crimp Machines and Equipment Equipment for Electrical Testing FFC-FPC Equipment
Analog Input Module IC670ALG630
1 IC670ALG630 The Thermocouple (IC670ALG630) accepts 8 independent thermocouple or millivolt inputs. Module features include: Self calibration Two data acquisition rates based on 50 Hz and 60 Hz line frequencies
INTER PLANT STANDARD STEEL INDUSTRY
INTER PLANT STANDARD STEEL INDUSTRY IPSS CODE OF PRACTICE FOR END TERMINATION AND JOINTING OF CABLES BY COMPRESSION MEHOD AND SPECIFICATION FOR DIELESS HYDRAULICALLY OPERATED CRIMPING TOOL (First Revision)
PRESENTING OUR NEW RANGE FROM PLATINUM TOOLS
PRESENTING OUR NEW RANGE FROM PLATINUM TOOLS TERMINATION GUIDE Prep and Crimping ezex-rj45 Connectors Using the EXO Crimp Frame 1. Remove cable jacket 5. To Unlock squeeze leaving 1 to 1 1/2 of handles
ABDAR AL-RIYADH FOR TRADING. KW Hydraulic Tools. Adnan F. H. Sabbubeh
KW Hydraulic Tools by Adnan F. H. Sabbubeh HS-85-G HS-85-G Hydraulic Cable Cutter for steel armed copper and aluminum cable incl. steel case, green (RAL6018) Diameter: 85 mm Cutting force: 60 kn KT-52
Platinum Split 4000 & Platinum Split 4000 Fully Ducted COLD WEATHER START KIT Installation Manual
Platinum Split 4000 & Platinum Split 4000 Fully Ducted COLD WEATHER START KIT Installation Manual Cold Weather Start Kit: To be used in conjunction with Platinum Split 4000 & Platinum Split 4000 Fully
Electricians & Plumbing Tools
Electricians & Plumbing Tools - 315 - Electric Glue Guns Electric Glue Guns Antidrip Silicon Tip Automatic Finger Lever Feed T20102 5-20W Pistol Grip Mini Glue Gun Trigger feed mechanism controls glue
JOE SCHROEDER Apprentice Electrician
JOE SCHROEDER Apprentice Electrician From battery to ratchet, if it needs to be cut or crimped, Greenlee s got the tool. A Greenlee exclusive the Gator-Plus battery-powered 4-ton crimping tool brings tons
REVERSE CYCLE SOLAR PV-INVERTER
MALAYSIA S FIRST REVERSE CYCLE SOLAR PV-INVERTER AIR CONDITIONER AIR-CONDITIONER AND SOLAR pv PANELS Recommended Tools & Accessories for Installation & Maintenance Recommended Tools for Air Con Unit Installation
LED Flex Tube Assembly Guide
LED Flex Tube Assembly Guide WARNING: NEVER APPLY POWER TO FLEX TUBE WHILE COILED!!! Please read entire guide before beginning assembly or installation. Licensed electricians should provide all electrical
NTD-125-*, NTD-204-* & NTD-220-* Nuaire Round & Rectangular Thermal Ducting Installation Guide
1.0 INTRODUCTION NTD-125-*, NTD-204-* & NTD-220-* Nuaire Installation Guide Nuaire Ductmaster Ducting (NTD) is a range of ing and ancillaries intended for installation in domestic properties. Nuaire Ducting
CRIMPING STEP-BY-STEP INSTRUCTIONS DEUTSCH DT. Detailed application instructions for crimping with the HELLA Heavy Duty System
CRIMPING STEP-BY-STEP INSTRUCTIONS DEUTSCH DT Detailed application instructions for crimping with the HELLA Heavy Duty System Heavy Duty Tool Case Composition example The modular design of HELLA s Heavy
Reliable connections are your main concern Our stars provide crimping that lasts Let s connect. Connection technology and electrical installation
Reliable connections are your main concern Our stars provide crimping that lasts Let s connect. Connection technology and electrical installation 1 Crimp all kinds of wire-end ferrules and contacts Our
1SC-SSC Splice Connection Kit Installation Instructions
1SC-SSC Splice Connection Kit Installation Instructions Description The 1SC-SSC is a NEMA 4 rated splice connection kit for use with Raychem 1SC30, 40, 50, 60, 70, 80 (-CT) and 1SC/H30, 40, 50, 60, 70,
PRODUCT CATALOG.
www.dalgakiran.com PRODUCT CATALOG 2017 Since the establishment of our company by Ömer Dalgakıran in 1965, we are a family that grows everyday; reaching 500 persons, this family develops its products and
Data Sheet. Self regulating heating tapes. RS stock numbers
Data Pack K Issued September 2001 232-3125 Data Sheet Self regulating heating tapes RS stock numbers 379-312 The information contained within this sheet regarding applications and installation of RS WinterGard
AVENGER HT THERMOSTAT RETROFIT INSTRUCTIONS
AVENGER HT THERMOSTAT RETROFIT INSTRUCTIONS In this installation manual: You will remove the existing mechanical thermostat from the Avenger HT dishwasher and will replace it with a new solid state thermostat.
Read these instructions thoroughly before crimping any terminals.
Figure 1 This instruction sheet covers the application and maintenance procedures for Pneumatic Crimping Head Assembly 314991 1. The crimping head assembly is designed for use in Pneumatic Tool 69015 to
Varistar LHX 3 Air/Water Heat Exchangers
Varistar LHX 3 Air/Water Heat Exchangers LHX 3Main CataloguePart number in bold face type: ready for despatch within 2 workin g dayspart number in normal type: ready for despatch within 10 working days
THERMOSTAT RETROFIT INSTRUCTIONS
With these instructions: You will remove the two existing thermostats from the dishmachine and will replace with a single new solid-state thermostat. TOOLS REQUIRED: Adjustable Wrench Philips Screwdriver
KIT NOTICE. These instructions are for replacing the three existing thermostats with a single new solid-state thermostat.
KIT 06401-004-22-16 5 1 2 NOTICE 3 (3 PLC'S) These instructions are for replacing the three existing thermostats with a single new solid-state thermostat. 4 PREPARATION PARTS INCLUDED 6 1 7 5 8 2 4 (4
Assortment boxes. PL1001 Elpress assortment box designed for electromechanical shops and service departments.
Assortment boxes PL00 Elpress assortment box designed for electromechanical shops and service departments. strong polypropylene box 29 partitions 000 pre-insulated terminals 0,5-6 mm² connector blocks
Taxonomies, Classifications, and Categories NEMA RATED TURNLOK PLUGS, CONNECTORS, & RECEPTICLES Combo Telephone Tool
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 30496 Telemaster RJ11/RJ45 Ideal Catalog Number 30496 Manufacturer Ideal Telemaster Combo Telephone Tool, Steel Frame,
Section 2 Safety, Tools and Equipment, Shop Practices Unit 5 Tools and Equipment
Section 2 Safety, Tools and Equipment, Shop Practices Unit 5 Tools and Equipment Unit Objectives After studying this chapter, you should be able to: Describe hand tools used by the air-conditioning, heating,
Section 2 Safety, Tools and Equipment, Shop Practices Unit 5 Tools and Equipment. Unit Objectives 3/1/2012. General Hand Tools (1 of 6)
Section 2 Safety, Tools and Equipment, Shop Practices Unit 5 Tools and Equipment Unit Objectives After studying this chapter, you should be able to: Describe hand tools used by the air-conditioning, heating,
SOLARLOK Interconnection System Installation Manual
SOLARLOK Interconnection System 1. Safety Note! n The SOLARLOK connector is to be used only to interconnect firmly fixed cables. n Do not disconnect under electrical load! n Electrical current path should
RA 701 B Batterie assembling. As at: 01/15/10 Time:21:19
Batterie assembling As at: 01/15/10 Time:21:19 Batterie assembling As at: 01/15/10 Time:21:19 Pos. Description Reference 01 Battery container 701.210 02 Guide rail 710.356 03 Hexagon screw M 6x12 P...486
Thermoplastic K-LINK hoses and accessories for refrigeration and air conditioning system
Thermoplastic K-LINK hoses and accessories for refrigeration and air conditioning system Bulletin ACH-GB The Air Conditioning / Refrigeration System The domestic and industrial Air Conditioning / Refrigeration
HYDRAULIC CRIMPING TOOL HYDRAULIC PRESSHEAD
HYDRAULIC CRIMPING TOOL HT 51 50 380 130 2,7 End sleeves Connectors 185 70 50 70 VAL P1* 445x290xh95 1,2 * Suitable for storage of the tool and 20 sets of dies. also the HT 51-KV version, for power supply
COLD WEATHER START KIT Ceiling Mount 4000
COLD WEATHER START KIT Ceiling Mount 4000 Cold Weather Start Kit: To be used in conjunction with Ceiling Mount 4000 (Manufactured After 01/07/15) cooling system. The Coolest Thing In Wine Storage CWSK.CM4.A
Reasons for reissue are provided in Section 6, REVISION SUMMARY.
Reasons for reissue are provided in Section 6, REVISION SUMMARY. The FRONT OF TOOL has the AMP marking on the link. The BACK OF TOOL (Wire Side), into which the wire is inserted, has the wire size marked
Astro 2 circulator models. Installation and operating instructions
Astro 2 circulator models Installation and File No: 10.89 Date: august 05, 2013 Supersedes: 10.89 Date: june 26, 2013 contents 1.0 Introduction 4 2.0 Installing 4 2.1 Terminal box 4 2.2 Electrical wiring
TIP FOR PR MAINTENANCE OS WORKSHOPS
TIP MAINTENANCE FOR PROS WORKSHOPS Non-binding offer. Only while stocks last Valid from 1 May to 31 August 2013 All prices in plus applicable VAT. Adolf Würth GmbH & Co. KG 74650 Künzelsau T +49 7940 15-0
KIT NOTICE. These instructions are for replacing the two existing thermostats with a single new solid-state thermostat.
KIT 06401-004-22-16 5 1 2 NOTICE 3 (3 PLC'S) These instructions are for replacing the two existing thermostats with a single new solid-state thermostat. 4 PREPARATION PARTS INCLUDED 6 1 7 5 8 2 4 (4 PLC'S)
Type 2 safety light curtain Type 2 according to the IEC/EN parts 1 and 2 Compact profile: 31 x 32 mm 30 mm resolution for hand detection Wide r
Type 2 safety light curtain FF-SLD Series FEATURES Active Optoelectronic Protective Device compliant with the requirements of the IEC/EN 61496-parts 1 and 2 European Norms 30 mm resolution for hand detection
Flipper Fidelity FF SPK CX CV Coax Speaker Installation Instructions ( )
Flipper Fidelity FF SPK CX CV Coax Speaker Installation Instructions (03 05 2019) Thank you for purchasing the Flipper Fidelity speaker kit for a Stern Pinball machine. Your kit includes the following:
Accuracy counts! Sensors with analog output
Accuracy counts! Sensors with analog output Company Contrinex is a leading international high-tech sensor company with headquarters in Switzerland. Contrinex offers quality and highly innovative sensing
Techno Machines India
+91-8071801783 Techno Machines India https://www.indiamart.com/techno-machinesindia/ We are a distinguished enterprise, holding wide expertise and experience in the fabrication and supply of a broad collection
Catalog Revised GLOBAL INDUSTRIAL AND COMMERCIAL. SOLARLOK Interconnection System
Catalog 889753-2 GLOBAL INDUSTRIAL AND COMMERCIAL SOLARLOK Interconnection System Table of Contents The SOLARLOK Concept.................................................. 1 Junction Box Serial Interconnection.......................................
Installation Manual. Floor-Standing Type FLOOR-STANDING TYPE AIR CONDITIONER
FLOOR-STANDING TYPE AIR CONDITIONER Installation Manual Floor-Standing Type IMPORTANT NOTE: Read this manual carefully before installing or operating your new air conditioning unit. Make sure to save this
Prisma Plus Assembly Guide. System G
Prisma Plus Assembly Guide System G Preface This guide proposes a procedure for assembling the Prisma Plus System G. We have designed it to help you successfully complete your first projects. It ensures
Preface. This guide proposes a procedure for assembling the Prisma Plus System G.
Preface This guide proposes a procedure for assembling the Prisma Plus System G. We have designed it to help you successfully complete your first projects. It ensures that assembling and cabling staff,
FUJITSU Component Connector. Instruction Manual for Hand Crimping Tool
FUJITSU Component Connector Instruction Manual for Hand Crimping Tool FUJITSU COMPONENT LIMITED -1- Table of contents 1. General 2. Structure, dimension, designation 3. Crimping procedure 1) Contact loading
In-Course Honors Project - VDV Crimpers. By: Shyenne Horras
In-Course Honors Project - VDV Crimpers By: Shyenne Horras 2014 Who is Greenlee Textron? Textron Company Overview Greenlee is a business unit of the company Textron, who owns a number of other units such
One-Touch Locking Style Small Sized Circular Connectors
One-Touch Locking Style Small Sized Circular Connectors Series OUTLINE Waterproof IP 67 Lock Type Push-On series is a small sized waterproof circular connector with push-on locking and turn-off unlocking
Technical Manual. VFD / Cabinet Heater Upgrade 110 VAC Heater to 12 VDC Heater. Provided by: Chart Inc.
Technical Manual VFD / Cabinet Heater Upgrade 110 VAC Heater to 12 VDC Heater Provided by: Chart Inc. 407 7th Street NW New Prague, MN 56071 USA (800) 400-4683 Part Number 20977233 Rev. A 2016 Chart Inc.
STORAGE ROLLER CABINETS & TOOL CHESTS...8 MODULES...12 FURNITURE SHOP...18 MAGNETIC ACCESSORIES...21 WORKSHOP TROLLEYS...22 METAL CHESTS...
ROLLER CABINETS & TOOL CHESTS...8 MODULES...12 FURNITURE SHOP...18 MAGNETIC ACCESSORIES...21 WORKSHOP TROLLEYS...22 METAL CHESTS...23 TOOL BOXES & SOFT STORAGE...23 MULTI-TOOL SETS...25 www.britoolexpert.co.uk
CRIMPERS AND CUTTERS. Information. CH Range. SC Range. BC Range. BC Accessories. HCH Range. CT Range. HWC Range. HSWC Range. HWRC Range.
RIMPERS ND UTTERS Information General information on crimping tools 122 H Range able crimping heads s 123 124 S Range Selfcontained cable crimping tools s 1 126 Range attery operated cable crimping tools
Revisions to this application specification include: Updated document to corporate requirements Changed product types in table in Figure 6
This specification covers the requirements for application of PLASTI GRIP Terminals and Splices for commercial applications. The terminals and splices consist of precision formed metal wire barrel insulated
w w w. w a s h e r h u b. c o m
w w w. w a s h e r h u b. c o m Washer Hub COMPANY PROFILE We are hereby pleased to introduce ourselves as one of the leading manufacturers & suppliers of press parts, fabrication & sheet metal components.
Data Sheet. Self regulating process heating tapes RS stock numbers ,
Data Pack K Issued March 1997 232-3333 Data Sheet Self regulating process heating tapes RS stock numbers 379-889, 379-974 The information contained within this sheet regarding applications and installation
61 13 Crimping on stop parts
61 13 Crimping on stop parts 1. Crimping butt connectors and contact sleeves for fan connectors up to 2.5 mm 2 The special tool 61 9 041 (crimping tool) in conjunction with 61 9 042 (matrix) are used for
Weight / 003 -Z M5 (SUCOFEED ¼ HF) bulk 10 pcs g / 5.25 oz.
Cable Connectors Straight Cable Plugs (male) > cable entry clamp > degree of protection IP 68 11 716-50-5-4 / 003 -Z 23003412 M5 (SUCOFEED ¼ HF) bulk 10 pcs. 27297 149 g / 5.25 oz. > for Sucoform cables
Airflex Radial & ISO Thermal pipe
Airflex Radial & ISO Thermal pipe Semi rigid ducting Key Features Zero leakage ensures highest performance 70% time saving on installation Interchangeable ducting system (75mm round / 51mm x 114mm oval)
STT 3000 Series STT250 /150 Surge Protection Device Specifications
STT 3000 Series STT250 /150 Surge Protection Device Specifications Part Number: 46188660-501 EN2I-6061 June 2011 Introduction This device is designed to give the Smart Temperature Transmitter maximum protection
Application Specification
Application Specification SOLARLOK connecting system for solar panels 1 of 31 Notification:... 3 1. Supplementary Documentation... 3 1.1 Customer Drawings... 3 1.2 Product Specifications... 4 1.3 Model
More Precision. indusensor Linear inductive displacement sensors
More Precision. indusensor Linear inductive displacement sensors - 1 - Standard sensors 4 LVDT series - gauges with external controller Proven LVDT technology Measuring ranges ±1 ±10mm Excellent price/performance
Get more out of tubes
Nordenmatic 702 Flexibility & Reliability Get more out of tubes Flexibility & Reliabilit There s a reason the Nordenmatic 702 is the top selling tube filling machine on the market: it s designed to deliver.
Parts Catalogue. /
Parts Catalogue www.viesa.ca / 1-888 438-8444 IMPORTANT Installation requires an experienced mechanic with specific knowledge in the installation of the VIESA Ecological Cooler. Installation, disassembly,
FULL FACADE IMAX ALUMINIUM PUNCH & PRESS MACHINE USER MANUAL. Designed and manufactured by IMAX Aluminium and Punching Systems
FULL FACADE IMAX ALUMINIUM PUNCH & PRESS MACHINE USER MANUAL Designed and manufactured by IMAX Aluminium and Punching Systems www.imaxpunch.com PROFESSIONAL SOLUTIONS TO PROFESSIONAL SYSTEMS! INDEX 1.GENERAL...