ABDAR AL-RIYADH FOR TRADING. KW Hydraulic Tools. Adnan F. H. Sabbubeh
|
|
- Matilda Jennings
- 5 years ago
- Views:
Transcription
1 KW Hydraulic Tools by Adnan F. H. Sabbubeh
2 HS-85-G HS-85-G Hydraulic Cable Cutter for steel armed copper and aluminum cable incl. steel case, green (RAL6018) Diameter: 85 mm Cutting force: 60 kn
3 KT-52 / KT-62-HD Ratched Cable Cutters Series KT extreme solid KT-52 up to 52 mm (one hand operated) KT-62-HD up to 62 mm KT-80 up to 80 mm
4 K-xxxxxxxxxx Ratched cable cutters with special function For cutting single-strand, multi-strand and fine-wire aluminium and copper cables Also for lead-coated cables (only D60 and D100) Ratchet action for high cutting performance Telescope arms adjust to a range of lengths Cutter can be opened in any cutting position Can be used in cramped situations as well as overhead Not for steel wire or wire cable
5 SSA-120-G-FHP-M SSA-95-S-FHP-M Hydraulic Life Line Cable Cutter For mild steel sheet armed copper and aluminum cable low and medium voltage 10 meter insulated hydraulic hose one earth bond unit steel case, green (RAL6018)
6 SSA-120-G-FHP-M SSA-120-G-FHP-M Hydraulic Life Line Cable Cutter For steel armed copper and aluminum cable 10 meter insulated hydraulic hose one earth bond unit steel case, green (RAL6018)
7 SA-120-G-SET-EHP-SE SA-120-G-SET-EHP-SE - S-120-G Cable Cutter with fixed 10 meter insulated hydraulic hose (700BAR) - EHP-SE-V230/60Hz-700BAR electric hydraulic pump with remote control - earth bond (1x) - steel case, green (RAL6018) for cutter with hose (KOFFER-SSA-GRÜN)
8 SA-160-G-SET-EHP-SE SA-160-G-SET-EHP-SE - S-160-G Cable Cutter with fixed 10 meter insulated hydraulic hose (700BAR) - EHP-SE-V230/60Hz-700BAR electric hydraulic pump with remote control - earth bond (1x) - steel case, green (RAL6018) for cutter with hose (KOFFER-SSA-GRÜN)
9 HP-131-C38-SET-KSA o Ideally suited for assembly work. Not recommended for mass assembly o Rotary and opening crimping head o Two-stage hydraulic system reducing the number of pumping o NEW! Piston with mechanical stop. This system prevents damage to the holder of the insets, in case of accidental use without insets o Using with semi-circular dies common to all 120/130 kn tools o Extreme large range of crimping dies o Automatic pressure relief control o Manual backflow anytime possible Incl. 11 x HP-131-C38-SET - HP-131-C38 Hand operated hydraulic crimping tool, 130 kn, opening jaw 38mm - incl. 11 hexagonal dies, acc. DIN46235 ( mm² CU / mm² AL) Crimping Width 14 mm, DIN-Sizes: 10, 12, 14, 16, 18, 20, 22, 25, Crimping Width 5 mm, DIN-Sizes: 28, 32 Crimping Width 7 mm, DIN-Sizes: 34 - metal carrying case, green (RAL6018) for dies and tool
10 P-131-C38-SET-FHP-M Incl. 11 x P-131-C38-SET-FHP-M Hydraulic Crimping Head, 130 kn - incl. 11 hexagonal dies, acc. DIN46235 ( mm² CU / mm² AL) Crimping Width 14 mm, DIN-Sizes: 10, 12, 14, 16, 18, 20, 22, 25 Crimping Width 5 mm, DIN-Sizes: 28, 32 Crimping Width 7 mm, DIN-Sizes: 34 - metal transport case, green RAL Plastic case for the dies - FHP-2-M Foot Operated Hydraulic Pump with gauge - 3 meter hydraulic hose with quick coupler
11 P-230-SET-FHP-M 14 x Acc. DIN High flexible steel armed hose up to 1400 BAR + Less pumping = this hose does not blow up + flexible radius under 20 cm very long life, much better than the types before P-230-SET-FHP-M Hydraulic Crimping Head, 230 kn - incl. 14 hexagonal dies acc. DIN46235 ( mm² CU / mm² AL) CrimpingWidth 14 mm DIN-Sizes: 10, 12, 14, 16, 18, 20, 22, 25, 28 Crimping Width 17 mm DIN-Sizes: 32, 34, 38, 42, 44 - metal transport case, green RAL FHP-2-M Foot Operated Hydraulic Pump with pressure gauge - 3 meter hydraulic hose with quick coupler
12 P-230-SET-EHP High flexible steel armed hose up to1400 BAR + Less pumping = this hose does not blow up + flexible radius under 20 cm very long life, much better than the types before P-230-SET-EHP Hydraulic Crimping Head, 230 kn at 700 bar - incl. 14 hexagonal dies acc. DIN46235 ( mm² CU / mm² AL) CrimpingWidth 14 mm DIN-Sizes: 10, 12, 14, 16, 18, 20, 22, 25, 28 Crimping Width 17 mm DIN-Sizes: 32, 34, 38, 42, 44 - metal transport case, green RAL SCHL3M-KN 3 meter hydraulic hose with quick couplers - EHP-SE-220V/60Hz-700BAR Electric Hydraulic Pump with remote control
13 P-540-SET-EHP High flexible steel armed hose up to1400 BAR + Less pumping = this hose does not blow up + flexible radius under 20 cm very long life, much better than the types before P-540-SET-EHP Hydraulic Crimping Head, 540 kn at 850 bar - incl. 9 hexagonal dies acc. DIN46235 ( mm² CU / mm² AL) Crimping Width 14 mm DIN-Sizes: 28 CrimpingWidth 17 mm DIN-Sizes: 32, 34, 38, 42, 44, 52, 58, 60 - metal transport case, green RAL SCHL5M-KN 5 meter hydraulic hose with quick couplers - EHP-SE-220V/60Hz-850BAR Electric Hydraulic Pump with remote control
14 P-695-SET-EHP High flexible steel armed hose up to1400 BAR + Less pumping = this hose does not blow up + flexible radius under 20 cm very long life, much better than the types before P-695-SET-EHP Hydraulic Crimping Head, 600 kn at 850 bar - incl. 5 hexagonal dies acc. DIN46235 ( mm² CU / mm² AL) Crimping Width 25 mm DIN-Sizes: 44, 52, 58, 60, 62 - metal transport case, green RAL SCHL5M-KN 5 meter hydraulic hose with quick couplers - EHP-SE-220V/60Hz-850BAR Electric Hydraulic Pump with remote control
15 P-1095-SET-EHP High flexible steel armed hose up to1400 BAR + Less pumping = this hose does not blow up + flexible radius under 20 cm very long life, much better than the types before P-1095-SET-EHP Hydraulic Crimping Head, 1000 kn at 850 bar - incl. 5 hexagonal dies acc. DIN46235 ( mm² CU / mm² AL) Crimping Width 25 mm DIN-Sizes: 44, 52, 58, 60, 62 - metal transport case, green RAL SCHL5M-KN 5 meter hydraulic hose with quick couplers - EHP-SE-220V/60Hz-850BAR Electric Hydraulic Pump with remote control
16 P-1114-SET-EHP High flexible steel armed hose up to1400 BAR + Less pumping = this hose does not blow up + flexible radius under 20 cm very long life, much better than the types before P-1114-SET-EHP Hydraulic Crimping Head, 1000 kn at 850 bar - incl. 14 hexagonal dies acc. DIN46235 ( mm² CU / mm² AL) Crimping Width 25 mm DIN-Sizes: 62, 70, 76, 80, 82 - metal transport case, green RAL SCHL5M-KN 5 meter hydraulic hose with quick couplers - EHP-SE-220V/60Hz-850BAR Electric Hydraulic Pump with remote control
17 P-1114-SET-EHP Adapter for IZUMI dies
18 FHP-2-M-SET FHP-2-M-SET - Food Operated Hydraulic Pump, 700 bar - with quick coupler - with pressure gauge - with SCHL3M-KN 3 Meter hydraulic hose with quick couplers - with steel case
19 EHP-850-SE-230V/60Hz EHP-850-SE-220V/60Hz-700BAR Electric Powered Hydraulic Pump, 850 bar Engine: 220 Volt / 60 Hz, 1100 Watt without remote control, without hose EHP-850-SE-220V/60Hz-700BAR Electric Powered Hydraulic Pump, 850 bar Engine: 220 Volt / 60 Hz, 1100 Watt without remote control, without hose Do not forget to order accessories: FB-1 Hand Cable Remote Control FS-1 Foot Cable Remote Control SCHL3M-KN 3 meter steel armored hydraulic hose with quick coupler
20 Cable Stripper
21 Cable Stripper
22 Cable Stripper UNICUT CABLE STRIPPER Unicut mm Transport case, peeling blade, 2 stripping blades 30 mm / 18 mm, chamfer blade, guard plate, case for blades and material, user manual Unicut mm Transport case, peeling blade, 2 stripping blades 38 mm / 18 mm, chamfer blade, guard plate, case for blades and material, user manual Unicut mm (in construction 2018) Transport case, peeling blade, 2 stripping blades 38 mm / 18 mm, chamfer blade, guard plate, case for blades and material, user manual UNIPOWER-34 Engine for UNICUT Helps to make a smooth surface by long peeling areas.
23 Cable Grinding Cable sanding machine Application The cable sanding machine is applied to sand the insulation surface of polymer cables. Technical Data * Rated Voltage: 220/230 V 50/60 Hz * Rated power: 500 W * Engine adjustable speed: / min Scope of delivery * Cable sanding machine * Spanner wrench M 17 * Technical document (various languages) * Safety instruction (various languages) * List of spare parts (English, German and French) * Packaging, plastic toolbox (51 x 26 x 25 cm) Ordering information Part no Type Description Weight (kg) UPC 2-R Cable sanding machine 8.0 Additional tools (to be ordered separately) Part no Type Description Emery papers, Width 29 mm Emery papers, Width 29 mm Emery papers, Width 29 mm Emery papers, Width 29 mm Emery papers, Width 29 mm Spare parts Part no Description Driving mechanism Holder with rollers Mechanical drive with handle bar Cable and Screen preparation
24 KW Hydraulik GmbH Hydraulikaggregate und Werkzeuge Koeppelsdorfer Str Sonneberg Germany Tel info@kw-hydraulik.de EST. AL-KHALEEJ CENTER, 1 ST FLOOR SHOW ROOM NO.74 KING FAHIRD ROAD, OLAYA RIYADH SA Info@abdaralriyadh.com Phone Fax: Mobile: KINGDOM OF SAUDI ARABIA
Cutting Tools. Hydraulic cutting heads Hydraulic drive units Hydraulic systems
Cutting Tools Hydraulic cutting heads Hydraulic drive units Hydraulic systems Cutting tools Hydraulic cutting heads SDG 85 SDG 85, SDG 105 Hydraulic cutting heads max. Ø 85 mm and Ø 105 mm Cut armoured
More informationTools. Standard Crimping Tools
Standard Crimping Standard Crimping CT15 for red, blue and yellow pre-insulated terminals. Indents on jaws identify which jaw has been used. Length 225mm. Weight 0.51kgs. UCT15 for un-insulated terminals
More informationTools. Contents Tools for contacts Han D Tools for contacts Han E Tools for contacts Han C
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.04 for contacts Han C... 99.06 for other contacts... 99.08 for FOC contacts... 99.10 for Han high current contacts... 99.12 Summary Han
More informationCrimping tool HHs-6. Art convincing solutions. Video
Hydraulic crimping tools INSTRUCTION MANUAL Crimping tool HHs-6 Art. 215765 Video 215765 1. Technical data Art. 215765 Area of application: For the creation of an electrical connection by means of compression
More informationHydraulic crimping tool. HO-6 Art convincing solutions
Hydraulic crimping tools INSTRUCTION MANUAL Hydraulic crimping tool HO-6 Art. 216802 1. Technical data Area of application: For the creation of an electrical connection by means of compression Scope of
More informationCRIMPERS AND CUTTERS. Information. CH Range. SC Range. BC Range. BC Accessories. HCH Range. CT Range. HWC Range. HSWC Range. HWRC Range.
RIMPERS ND UTTERS Information General information on crimping tools 122 H Range able crimping heads s 123 124 S Range Selfcontained cable crimping tools s 1 126 Range attery operated cable crimping tools
More informationHYDRAULIC CRIMPING TOOL HYDRAULIC PRESSHEAD
HYDRAULIC CRIMPING TOOL HT 51 50 380 130 2,7 End sleeves Connectors 185 70 50 70 VAL P1* 445x290xh95 1,2 * Suitable for storage of the tool and 20 sets of dies. also the HT 51-KV version, for power supply
More informationEconomically Productive Universal applicable
Professional installation- and electrical connection technique druseidt battery operated tool program: Electro-hydraulic operated crimping- and cutting tools for industrial as well as applications in craft
More informationTools for other contacts Tools for FOC contacts Crimping machine TK-M Crimping machine TC-C
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.04 for contacts Han C... 99.06 for other contacts... 99.08 for FOC contacts... 99.10 for Han high current contacts... 99.12 Summary Han
More informationAround the cable. Hydraulic crimping tools. Crimping without effort Universal use Low maintenance. haupa...technology that connects
Around the cable Hydraulic crimping tools Crimping without effort Universal use Low maintenance haupa...technology that connects Hydraulic crimping tools INFO Hydraulic crimping tools These hydraulic crimping
More informationHYDRAULIC CRIMPING TOOL
HYDRAULIC CRIMPING TOOL HT 120 Crimping force kn 120 488 138 5,7 This lightweight and self contained tool will accept the semi-circular slotted dies, coon to most 130 kn tools. It is particularly suitable
More informationTHE CABLE ACCESSORY COMPANY THE BEST 30 YEARS
THE CABLE ACCESSORY COMPANY THE BEST 30 YEARS Tool Catalogue www.three-d.co.za Contents Cable and Wire Cutters (Hand-held) Wie Duct Cutters (Hand-held) Cable Tie Tensioning Tools Wire Strippers Pre-Insulated
More informationCables. Rubber and Control Cables H05VV-F. JZ flexible. F-CY-JZ - copper screened H07RN-F. Y-CY-JZ - copper screened, transparent H05RR-F
Cables 45 Rubber and Control Cables H05VV-F JZ 500 - flexible F-CY-JZ - copper screened H07RN-F Y-CY-JZ - copper screened, transparent H05RR-F SAT and Heat Reistant Cables Coaxial Cable SIF, SIF/GL, SIFF,
More informationHydraulic Crimper 05
Hydraulic Crimper Hydraulic Tools As well as retaining most of the information from the last issue of the catalogue, we have added a large section on new products of interest to our industry. COMPRESSION
More informationElectro-hydraulic crimping tools. HD400-6 Art HD300-6 Art convincing solutions
Hydraulic crimping tools INSTRUCTION MANUAL Electro-hydraulic crimping tools HD400-6 Art. 216661 HD300-6 Art. 216660 convincing solutions 1. Technical data Area of application: For the creation of an electrical
More informationINSTALLATION TOOLS & ACCESSORIES
Industrial products we wholesale, you distribute INSTALLATION TOOLS & ACCESSORIES CRIMPERS Heat Shrink Terminals Ratcheted Crimper Heavy Duty Handheld Hexagon Crimper Eclipse Non-insulated Terminal Crimper
More informationHydraulic crimping tool. HO-16 Art QZERTIFIKAT DIN EN ISO convincing solutions
Hydraulic crimping tools INSTRUCTION MANUAL Hydraulic crimping tool HO-16 Art. 216802 DIN EN ISO 9001 QZERTIFIKAT 1. Technical data Area of application: For the creation of an electrical connection by
More informationwwww.cablectrix.com tel:+44(0) The first electromechanical crimping tool with PowerSense technology
wwww.cablectrix.com tel:+44(0)1327 876769 TECHNOLOGY The first electromechanical crimping tool with PowerSense technology Times change. ELECTROMECHANICAL CRIMPING TOOL EK 50ML And so do requirements. Fast,
More informationCrimping tools for D-Sub contacts Crimping tools for other contacts Crimping machine TC-C
Contents Page Hand crimping tools for Han standard contacts... 90.4 Pneumatic crimping tools for Han standard contacts... 90.9 Crimping tools for D-Sub contacts... 90.11 Crimping tools for Han TC high
More informationSpecialist Tools and Accessories
Specialist Tools and Accessories 1.5T Crimpers C343 3T Crimpers C343 5T Crimpers C343 12 to 15T Crimpers and Crimp Heads C344 23 to 25T Crimpers and Crimp Heads C347 52 to 60T Crimpers and Crimp Heads
More informationJOE SCHROEDER Apprentice Electrician
JOE SCHROEDER Apprentice Electrician From battery to ratchet, if it needs to be cut or crimped, Greenlee s got the tool. A Greenlee exclusive the Gator-Plus battery-powered 4-ton crimping tool brings tons
More informationCUTTING & CRIMPING 12 Depliant Cutting Crimping Tools.indb :45
CUTTING & CRIMPING 2 QUALITY, THE SUPERIOR GOAL INTERCABLE STANDS FOR HIGH QUALITY Products and service! An efficient organisation, as well as a quality management according to the EN ISO 9001 international
More informationTools for Cu-terminals mm², Al-terminals mm² (-35 solid) mm² and C-sleeves 6-50 mm²
Tools for Cu-terminals 10-240, Al-terminals 16-25 (-35 solid) and C-sleeves 6-50 T2600/T2600B/T2600C T2600/T2600B/T2600C Mechanical handtool for crimping of Cu- and Al-terminals: T2600 for KRF/KSF, T2600B
More informationINTER PLANT STANDARD STEEL INDUSTRY
INTER PLANT STANDARD STEEL INDUSTRY IPSS CODE OF PRACTICE FOR END TERMINATION AND JOINTING OF CABLES BY COMPRESSION MEHOD AND SPECIFICATION FOR DIELESS HYDRAULICALLY OPERATED CRIMPING TOOL (First Revision)
More informationTECHNICAL SPECIFICATIONS SWIVEL ARM GRINDING MACHINE
TECHNICAL SPECIFICATIONS SWIVEL ARM GRINDING MACHINE 1. PURPOSE : The Grinding machine is required for taper grinding of the Root and Shroud of the Turbine blades within close tolerances during assembly
More informationCABLE & WIRE CUTTERS HAND-HELD. LK-38A - Cable and wire cutter for CU/AL. LK-22A - Cable and wire cutter for CU/AL
CABLE & WIRE CUTTERS LK-22A - Cable and wire cutter for CU/AL HAND-HELD LK-38A - Cable and wire cutter for CU/AL Up to 25mm 2 Max Diameter: 160mm 15mm 0.19kg Not Suitable for cutting steel wire, armoured
More informationTechnology The first electromechanical crimping tool with PowerSense technology Manual pre-clamping. Motorized crimping.
www.klauke.com Technology The first electromechanical crimping tool with PowerSense technology Manual pre-clamping. Motorized crimping. Fast, light, efficient the way you crimp today. Whether you want
More informationTools for crimping terminals and connectors in Chapters 4, 5 and 7
Tools for crimping terminals and connectors in Chapters 4, 5 and 7 Tools for Cu-terminals 4-120 3 Battery powered crimp tool for Cu terminals 10-5 4 Tools for Cu-terminals, Al-terminals and C-sleeves 6-50
More informationRK12ID Remote Dieless Crimping Tool
INSTRUCTION MANUAL Serial Number RK12ID Remote Dieless Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More informationAlways ahead of the game with the Klauke product range for utility companies
www.klauke.com Always ahead of the game with the Klauke product range for utility companies Electrical connection systems / Tools / Measuring, testing and safety devices Unified force for the utility company
More informationAround the cable. Pressing and crimping.... convincing solutions
Around the cable Pressing and crimping... convincing solutions 33 INFO HUPcompact The new HUPcompact is a handy, compact crimp tool that will be available in 4 variations: HUPcompact HC01 for insulated
More informationMontageausrüstung Assembly Equipment
Montageausrüstung Assembly Equipment Montage am Kabel / Assembly on the cable Montage an Freileitungen/ Assembly on overhead lines Erdungs- und Kurzschließvorrichtungen / Earthing and short circuiting
More informationTechnical Manual. VFD / Cabinet Heater Upgrade 110 VAC Heater to 12 VDC Heater. Provided by: Chart Inc.
Technical Manual VFD / Cabinet Heater Upgrade 110 VAC Heater to 12 VDC Heater Provided by: Chart Inc. 407 7th Street NW New Prague, MN 56071 USA (800) 400-4683 Part Number 20977233 Rev. A 2016 Chart Inc.
More informationOperating Instructions for CRIMPING TOOL HP 95
Operating Instructions for CRIMPING TOOL HP 95 TABLE OF CONTENTS CE Conformity Attestation Safety Regulations Operative Range... 1 Technical Specifications... 1 Operation... 1 Use... 2 Crimping... 3 Maintenance...
More informationTool Storage Tool Modules
Tool Storage Tool Modules TOOL KITS IN ROLLER CABINETS Tool System Solutions from RS for Garages, Factories and Workshops Our revised program consists of various combinations of tools for users in different
More informationHEATING CABLE RATINGS APPROVALS* Drexan Energy Systems, Inc. Kelowna, BC, Canada, V4V 1S5
DREX0019 Division 1 Adapter Kit Single Cable These installation instructions are only for use with the following Drexan HeatTracer heater products: Self-Regulating (PipeGuard Warm (PGW), MultiTrace (MT)
More informationMobileCrimp Crimper Die Selection Table For MegaCrimp. MobileCrimp. Die Sets (ordered separately) Digital Dial Control
MobileCrimp 4-20 Crimper This lightweight, versatile crimper is powerful enough to crimp up to 1-1/4" four spiral-wire hose Weighing approximately 57 pounds, this new field crimper combines the latest
More informationSection 2 Safety, Tools and Equipment, Shop Practices Unit 5 Tools and Equipment
Section 2 Safety, Tools and Equipment, Shop Practices Unit 5 Tools and Equipment Unit Objectives After studying this chapter, you should be able to: Describe hand tools used by the air-conditioning, heating,
More informationSection 2 Safety, Tools and Equipment, Shop Practices Unit 5 Tools and Equipment. Unit Objectives 3/1/2012. General Hand Tools (1 of 6)
Section 2 Safety, Tools and Equipment, Shop Practices Unit 5 Tools and Equipment Unit Objectives After studying this chapter, you should be able to: Describe hand tools used by the air-conditioning, heating,
More informationList of useful contacts
MARKET REPORT - The machine tools market in Saudi Arabia List of useful contacts The machine tools market in Saudi Arabia 36 Legend: AL-ZAMIH King Khalid street/24th Cross P.O Box 1405 Al-Khobar 31952,
More informationManifold Gauge LD.R1.02 LD.R1.01. manifold gauge. manifold gauge. brass body. brass body LD.R1.04 LD.R1.03. manifold gauge.
Manifold Gauge LD.R1.01 manifold gauge brass body LD.R1.02 manifold gauge brass body LD.R1.03 manifold gauge aluminum body LD.R1.04 manifold gauge aluminum body LD.R1.05 manifold gauge aluminum body LD.R1.06
More informationMICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER. Industrial Equipment Rental & Service
MICHIGAN S ONLY AUTHORIZED WARRANTY SERVICE CENTER Industrial Equipment Rental & Service Bending Classic Electric Bender for Conduit & Pipe Item #555C Electric Bender Item #854DX Bend 1/2" to 2" RIGID/IMC/EMT
More informationTools for crimping terminals and connectors in Chapters 4, 5 and 7
Tools for crimping terminals and connectors in Chapters 4, 5 and 7 Tools for Cu-terminals 4-120 3 Battery powered crimp tool for Cu terminals 10-5 4 Tools for Cu-terminals, Al-terminals and C-sleeves 6-50
More informationHakki Pilke Raven spare parts manual
1 ENGLISH Hakki Pilke Raven spare parts manual Valimotie 1, FI-85800 Haapajärvi, FINLAND Tel. +358 8 772 7300, Fax +358 8 772 732 info@maaselankone.fi, www.maaselankone.fi 2 Table of contents 1 Upper section
More informationTools. Contents Tools for contacts Han D Tools for contacts Han E Tools for contacts Han C
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.03 for contacts Han C... 99.04 for Han-Modular and other contacts... 99.05 for FOC contacts... 99.06 Summary Han Crimping tools... 99.07
More informationThe finest fruit processing
www.obstverarbeitung-holstein.de www.a-holstein.de The finest fruit processing Innovative solutions for high quality fruit juices Fruit processing perfection As a manufacturer of fruit processing machines
More informationShort Path Distillation Unit. KDL 1 BASIC Version 2015
Short Path Distillation Unit KDL 1 BASIC Version 2015 Example Picture of KDL 1 BASIC with Option B, C, D and E 1/5 1. General This specification decribes the scope of delivery regarding a single stage
More informationOPERATING INSTRUCTIONS
HTV10 Hand Tool, Tandem Spring, Document number: TE Connectivity (TE) PN: 6-744017-4 Language: EN (translation of the original German version) Contents 1 Revisions... 1 1.1 Revision history... 1 2 Introduction...
More informationXpert HD Xpert HD 7140, ,
Xpert HD 7140 Cold-water pressure washer for daily commercial use. With its compact dimensions, robust construction and greatest possible manoeuvrability, this unit is a credit to the compact class. TECHNICAL
More informationKongskilde Suction Blowers a Flexible and Dependable Conveying System
Suction Blowers Kongskilde Suction Blowers a Flexible and Dependable Conveying System Kongskilde has been developing and manufacturing grain blowers since 1949 and is today one of the leading producers
More informationCompact, robust crimping tool. suitable for a variety of noninsulated. terminals. Also features a cable cutter and spring return.
CRIMPING & CABLE TOOLS Compact, robust crimping tool suitable for a variety of non-insulated terminals. Also features a cable cutter and spring return. TT71 Crimping Tool/Cable Stripper suitable for insulated
More informationHD Kompakt Service Manual
HD Kompakt Service Manual English 5.906-583.0 Rev. 00 (08/13) 1 1 Contents 1 Contents.................................................... 2 2 Preface.....................................................
More informationTechnical description
Rail profile grinding machine NRG Technical description Nencki Ltd Railway Technology Gaswerkstrasse 27 4901 Langenthal Switzerland Tel. +41 62 919 93 93 Fax +41 62 919 93 90 railway@nencki.ch www.nencki.ch
More informationINSTALLATION INSTRUCTIONS UNDERCOUNTER DISHWASHERS
INSTALLATION INSTRUCTIONS UNDERCOUNTER DISHWASHERS VIKING 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 IMPORTANT - PLEASE READ AND FOLLOW Before beginning - please read these instructions
More informationORIGINAL SPARE PARTS CHD-6330
ORIGINAL SPARE PARTS CHD-6330 85010075/02 Revision 02/2013 FRAME 1.0 FRAME 1.0 Rif Code Description 1 *4399880 SCREW TE 10x40 2 *4399378 WASHER D.10 (10,5x21x2) 3 *6611330 SUPPORT 4 *7910913 CHUCK 5 *4399288
More informationYou are streamlining your manufacturing processes Our automatic machines optimise installation times Let s connect.
You are streamlining your manufacturing processes Our automatic machines optimise installation times Let s connect. Connectivity and electrical installation A high degree of automation for standardised
More informationTechnical Description 50 1C. One Compression Baler. The baler is available in two versions
Technical Description 50 1C One Compression Baler The baler is available in two versions The baler has continuing feeding and automatic working cycle CONTENTS What makes G.P.S. balers the best in the world?
More information2014 summer NEW PRODUCT SCOOP INTRODUCING. New Open Front Tool Chest
New Open Front Tool Chest INTRODUCING JET s new line of portable pumps & pressure washers, gets the job done on time &and budget is easy. 842283 JOFC-26A 2014 summer NEW PRODUCT SCOOP INDUSTRIAL POWER
More informationWire & Cable Termination
If you need to cut, crimp or strip, Greenlee has the tool from manual-style to battery-powered. Use our cable cutter selection guide and cross-reference charts to choose the right high-quality, handheld
More informationCRIMPING TOOLS CRIMPER Cable Cross-Section 0,25-6,0mm² (AWG 24-10) Crimping Technic Terminal Insertion. Terminal / Connector Type
HAND TOOLS CRIMPING TOOLS CRIMPER 6-562113 0,25-6,0mm² (AWG 24-10) Crimping Technic Terminal Insertion Self-Adjustment Linear Front Automatic Terminal / Connector Type Crimping Profile Automatic adjustment
More informationschoen + sandt machinery GmbH Lemberger Stra e 82 D Pirmasens Tel:
Technical Catalog Cutting Machines More than 150 years of perfect solutions www.schoen-sandt.de schoen + sandt machinery GmbH Lemberger Stra e 82 D-66955 Pirmasens Tel: +49 63 31 713 100 info@schoen-sandt.de
More informationRevisions to this application specification include: Updated document to corporate requirements Changed product types in table in Figure 6
This specification covers the requirements for application of PLASTI GRIP Terminals and Splices for commercial applications. The terminals and splices consist of precision formed metal wire barrel insulated
More informationRange of Application: For Non-insulated cable Terminal Lug Capacity:1.5-10mm2 AWG:16-8AWG Length:220mm Weight:0.49Kg. Length:220mm Weight:0.
Crimping pliers adopt the principle of using the best leverage to effectively handle the design. Although the short and compact structure, especially in the larger horizontal pressure to the cross section
More informationIndustrial cooling systems LT
Industrial cooling systems LT 01 Industrial cooling and heating. Partner of the industry for over 40 years. Since 1971 DELTATHERM has belonged to Hirmer GmbH, a family business with its headquarters in
More informationORIGINAL SPARE PARTS CHD-6330
ORIGINAL SPARE PARTS CHD-6330 85010075/00 Revision 07/2008 FRAME 1.0 FRAME 1.0 Rif Code Description 1 *4399880 SCREW TE 10x40 2 *4399378 WASHER D.10 (10,5x21x2) 3 *6611330 SUPPORT 4 *7910913 CHUCK 5 *4399288
More informationWorkshop & Engineering
Workshop & Engineering 231 15 Workshop & Engineering 12 WR RN T Products in Kincrome Workshop & Engineering range now include Bench Grinders and Drill Presses. The Bench Grinders come in 3 sizes; 150mm,
More informationSmart Comfort Solutions HIGH VELOCITY DRUM FANS
Smart Comfort Solutions HIGH VELOCITY DRUM FANS Direct Drive Drum Fans Direct Drive drum fans are great for heavy duty air circulation in light duty commercial applications where an economical solution
More informationHD 5/11 C Plus. Automatic pressure cut-off. Pump technology
HD 5/11 C Plus Compact cold-water high pressure cleaner. With its compact dimensions, robust construction and greatest possible manoeuvrability, this unit is a credit to the compact class. 1 Automatic
More informationHD 6/15-4 Classic. Durable and robust. Improved cleaning performance. Especially easy to maintain. Excellent mobility
HD 6/15-4 Classic Single-phase, compact, strong: the service-friendly HD 6/15-4 Classic high-pressure cleaner with a 600 l/h water flow, powerful crankshaft pump, ceramic piston and the latest sealing
More informationGlass Door Merchandiser. Model RM-45-SD
Glass Door Merchandiser Model Number: Issued: 02-22-2017 Revised: 02-22-2017 2 TABLE OF CONTENTS UNIT FEATURES 4 Page CROSS SECTION VIEWS 5 EXPLODED VIEW 6, 7 REFRIGERATION SYSTEM 8, 9 CONDENSING UNIT
More informationTopMaster Air Handling unit. Technical data
Technical data Contents Page Description of the unit... 3 Design... 4 Technical data Size 030... 5 Size 0... 6 Accessories... 7 Controls... 9 Control functions... 10 Order codes... 11 Fläkt Woods 8180
More informationNEPTUNE 2. Model: NEPTUNE 2-13 NEPTUNE 2-20 NEPTUNE 2-25 NEPTUNE 2-26 NEPTUNE 2-30 NEPTUNE 2-33 NEPTUNE 2-38 NEPTUNE Part List US-English
NEPTUNE 2 Model: NEPTUNE 2-13 NEPTUNE 2-20 NEPTUNE 2-25 NEPTUNE 2-26 NEPTUNE 2-30 NEPTUNE 2-33 NEPTUNE 2-38 NEPTUNE 2-41 Part List US-English Table of Contents NEPTUNE 2 Frame 3 Cabinet 5 Fueltank and
More informationComfort Ceiling Fan Coil System INDULVENT ec. Draught-free ambient air distribution with cooling capacity up to 2600 W
Comfort Ceiling Fan Coil System INDULVENT ec NEW Draught-free ambient air distribution with cooling capacity up to 2600 W Low sound power levels Only electrical, cooling water and condensate connections
More informationExploded View - Model J-7020M/J-7040M Miter Cut-off Saw Base
22 Exploded View - Model J-7020M/J-7040M Miter Cut-off Saw Base Parts List - Model J-7020M/J-7040M Miter Cut-off Saw Base 1 J-5507591 Base, Machine 1 1-1 5512197 Plug, Drain (3/8in, PT) 2 5507592 Screw,
More informationPRODUCT CODE PRICE. Suggested spare parts kit BF
PRICE LIST 2017 CRUSHER BUCKET BF / MB-C MB-C50 S2 Crusher bucket MB-C50 S2 21.700 Drainage kit BF5000018 110 Hydraulic hoses 220005000 410 Jaw B50005250 650 Plate B50001050 235 Warranty extension GOLD
More informationPNB-1 PNB-3 PNB-4KE BENCH PRESS TOOLS. INTERCHANGEABLE DIES (to be ordered separately) PV-1 green 0,2 0,5 PR-1 Insulated red 0,25 1,5 PB-1
B E N C H P R E S S T O O L S 114 INTERCHANGEABLE DIES (to be ordered separately) Die Set Guard* Nominal PV-1 green 0,2 0,5 PR-1 Insulated red 0,25 1,5 PB-1 PU-1 connectors blue 1,5 2,5 PG-1 yellow 4 6
More informationZX130-6 UTILITY EXCAVATORS
UTILITY EXCAVATORS MID-SIZE 2 BIG PERFORMANCE. PACKAGE. The features a number of productivity-boosting advantages, like a fuel-efficient EPA Final Tier 4 (FT4)/EU Stage IV Isuzu engine that meets rigid
More informationPRODUCT CATALOGUE Avenue Edmonton, AB Canada T6E 5Z7. Toll Free: Phone: (780) Fax: (780)
PRODUCT CATALOGUE 9333 45 Avenue Edmonton, AB Toll Free: 1-800-272-9693 Phone: (780) 436-1930 Fax: (780) 435-4849 info@can-con.com BUTT FUSION EQUIPMENT MicroMax weighs only 3.5 pounds (1.6kg) for ½ CTS
More informationTOOLS & MISCELLANEOUS
TOOLS & MISCELLANEOUS 01-5095 251189 Sillcock Tee Handle, For 16 Broach Splined Stem, Fits Most Outside Hose Valves. 052151010056 01-5223 251199 4 Way Stem Key, Fits Square Stems 1/4, 9/32, 5/16, & 11/32.
More informationDESCRIPTION. 42 mm. 125 mm
RMM2-DI TRACE-HEATING REMOTE MONITORING MODULE FOR DIGITAL INPUTS DESCRIPTION 125 mm 60 mm The Remote Monitoring Module for Digital Inputs (RMM2-DI) provides the capability for the Raychem NGC controller
More informationSection 8: Switchgear Connections (Straight & Elbows)
8: Switchgear Connections (Straight & Elbows) HEAT SHRINKABLE RSRB Inline and Right Angle Bushing Boots 126 PUSH ON ELBOWS RCAB-41 Elastomeric Flexible Bushing Boot - up to 17.5kV 127 RCAB-51 Inline Cold
More informationTOOLS 201 CABLE TOOLS 207 SOLDERING TOOLS // PRODUCT FINDER
TOOLS TOOLS // PRODUCT FINDER 201 CABLE TOOLS 207 SOLDERING To carry out an installation or service, you need the right tools. Our range of cable and soldering tools covers most of the items you need to
More informationSpare parts list GS GS GS 315
Spare parts list GS 0 - GS - GS Contents Water inlet Page Water softener GS 0, GS Page Water drain, Mediamat Cyclo Page Wash pump Page Bottom washing/rinsing system Page Top washing/rinsing system Page
More informationInstallation Instructions 30 French Door Built-in Wall Ovens
Installation Instructions 30 French Door Built-in Wall Ovens Questions? Call 1.800.GE.CARES (1.800.432.2737) or visit www.geappliances.com In Canada, call 1.800.561.3344 or visit www.geappliances.ca DESIGN
More informationTools for crimping Cu, Al-/Cu terminals and connectors
Tools for crimping Cu, Al-/Cu terminals and connectors Tools for crimping Cu, Al-/Cu terminals and connectors Tools for Cu terminals 4-120 mm² 3 ELPRESS Mini PV350, battery powered crimp tool 5 SYSTEM
More informationSmart Comfort Solutions HIGH VELOCITY DRUM FANS
Smart Comfort Solutions HIGH VELOCITY DRUM FANS Direct Drive Drum Fans Direct Drive drum fans are great for heavy duty air circulation in light duty commercial applications where an economical solution
More informationRefrigerant R407C CW-AR. 2.4 to 3.1kW. Water Source Heat Pumps - Vertical Mounting Version Models 07 to to 2.7kW
Refrigerant R407C CW-AR Water Source Heat Pumps - Vertical Mounting Version Models 07 to 12 2.4 to 3.1kW 1.9 to 2.7kW Some advantages... RAL 9010 painted cabinet 3-fan speeds G2 filter is supplied as
More informationUnder. Apprenticeship Training Scheme
SYLLABUS For the trade of MECHANIC (ELECTRICAL DOMESTIC APPLIANCES Under Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training
More informationVapour Jet Refrigerator / Heat Pump R853
Vapour Jet Refrigerator / Heat Pump R853 Enables demonstration and investigation of the combined Rankine and Vapour Compression Cycle Is an example of a refrigerator or heat pump driven by a Heat Input
More informationR-124 MANUAL LOKRING W
R-124 TECHNICAL SERVICE MANUAL TRAINING MANUAL LOKRING LOKRING Tube Tube Connection Connection System System W110254738 FORWARD This Whirlpool Technical Training Manual, (Part No. W11025473), provides
More informationTECHNICAL MANUAL CX(E) SPLIT SYSTEMS. Tel: Fax:
TECHNICAL MANUAL CX(E) SPLIT SYSTEMS CONTENTS INDEX PART NUMBERS, OPTIONS, UNIT COMBINATIONS, DIMENSIONS & WEIGHTS 3 PERFORMANCE DATA & AIR FLOW 4 SOUND POWER AND SOUND PRESSURE LEVELS 5 ELECTRICAL DATA
More informationWeighing Balances. Hot Plate. Laboratory Oven. Muffle Furnace. Loss On Heating Oven COMMERCIAL EQUIPMENTS. General / Special Purpose Equipment
Weighing Balances Digital Weighing Balances Mechanical Two Pan Balances Spring Balances Laboratory Oven effect of heat & air on Ashpaltic Materials (Thin film test). The unit is heavily insulated & has
More informationIsotemp. Improve the productivity of your laboratory with accurate, efficient temperature control products from Fisher Scientific.
Isotemp Bath Circulators and Chillers Improve the productivity of your laboratory with accurate, efficient temperature control products from Fisher Scientific. Choose the temperature control option that
More informationTechnical description M 30-3C. Three compressions baler. The baler has continuing feeding and automatic working cycle
Technical description M 30-3C Three compressions baler The baler has continuing feeding and automatic working cycle CONTENTS What makes GPS balers the best in the world? M 30-3C baler in summary Choosing
More informationAquatique. Shower heads. Fixed and adjustable height heads. Aquatique shower kits installation guide page 1
Aquatique Shower heads Fixed and adjustable height heads Aquatique shower kits installation guide page 1 Components Aquatique adjustable height shower kit concealed Chrome 560.01 / Gold 560.04 Aquatique
More informationmonty 4200 Truck Tire Changer Spare Parts list
monty 4200 Truck Tire Changer Spare Parts list Date 08/12/09 Figure 1 Baseframe Date 08/12/09 Page 2 Monty 4200 Spare Parts list Figure 2A Carriage with Mounting Arm Date 08/12/09 Page 3 Monty 4200 Spare
More informationZAXIS PRODUCTION-CLASS EXCAVATORS DASH-6 ZX470LC-6
PRODUCTION-CLASS EXCAVATORS ZAXIS DASH-6 1 ZAXIS DASH-6 PRODUCTION-CLASS EXCAVATORS PROVEN PERFORMANCE PASSED DOWN. PRODUCTIVITY-BOOSTING ADVANTAGES. At Hitachi, efficiency, reliability and durability
More informationCatalog Issued GLOBAL APPLICATION TOOLING AND EQUIPMENT
GLOBAL APPLICATION TOOLING AND EQUIPMENT Table of Contents Introduction........................................................... 1 Area of Application......................................................
More informationMechanical Crimping Tool JT-150 Instruction Manual
500.630 Mechanical Crimping Tool JT-150 Instruction Manual Due to continuing improvements, actual product may differ slightly from the product described herein. General Safety Rules To work in safe conditions
More informationAVANI Grinding Booth
AVANI Grinding Booth GB-6066-DD Customer: Kelly Walsh Customer PO#: 11305 AVANI SO#: Serial #: 153920-153921 Ship Date / Install Date: Tested By: Please read and save these instructions. Read carefully
More information