PNB-1 PNB-3 PNB-4KE BENCH PRESS TOOLS. INTERCHANGEABLE DIES (to be ordered separately) PV-1 green 0,2 0,5 PR-1 Insulated red 0,25 1,5 PB-1
|
|
- Sibyl Rice
- 5 years ago
- Views:
Transcription
1 B E N C H P R E S S T O O L S 114
2 INTERCHANGEABLE DIES (to be ordered separately) Die Set Guard* Nominal PV-1 green 0,2 0,5 PR-1 Insulated red 0,25 1,5 PB-1 PU-1 connectors blue 1,5 2,5 PG-1 yellow 4 6 KE ,3-0,5-0,75 KE PK-1 1-1,5-2,5 End KE 10-1 KE, PK Sleeves MTT ME-1 MTT A 03-M.. S ,25-1,5 N1-1 PU-1 A 06-M.. S ,5-2,5 A 1-M.. S ME 1-50 PU-1 A1-M ME 2-50 A2-M.. S10-M.. 10 ME 3-50 A3-M.. 16 ME 5-50 Uninsulated A5-M.. 25 ME 7-50 ME-1 copper A7-M.. ME 9-50 lugs A9-M.. 35 ME A10-M.. ME A12-M.. 50 MN 2RF-50 ANE2-M.. 10 MN 3RF-50 Polyamide ANE3-M.. 16 MN 5RF-50 MN RF-1 insulated ANE5-M.. 25 MN 7RF-50 lugs ANE7-M.. ANE9-M.. 35 * Supplied as standard with the machine BENCH PRESS TOOLS PNB-1 Pneumo-hydraulic, production bench press, controlled by a foot operated pedal, provides a consistent and reliable crimped connection. Extensive range of inter- changeable dies available for crimping a wide variety of connectors. - Nominal operating pressure: 6 bar - LxDxH: 180x320x700 mm - : 23 kg (without dies) NOTE: for applications not listed, please contact Cembre. PNB-3 PNB-3P* Insulated connectors red, blue and yellow 0,25 6 PNB-3PD Insulated terminals and butt connectors - frontal insertion 0,25 6 PNB-3N1 Uninsulated terminals 0,25 10 PNB-3N5 Uninsulated terminals PNB-3NN3 Polyamide insulated terminals 1,5 10 PNB-3NN4 Polyamide insulated terminals PNB-3F/M Bullet connectors 0,5 2,5 * Will also crimp Polycarbonate fully-insulated terminals if fitted with PNB3F/M positioner, available as an optional accessory. - Normal operating pressure: 6 7 bar - LxDxH: 130x370x195 mm - : 10,3 kg Pneumatic bench press operated by foot pedal for crimping terminals and connectors 0,25 to 16. PNB-4KE End Sleeves type PK.. and type KE - Nominal operating pressure: 6 bar - LxDxH: 120x160x300mm - : 6 kg PNB-4KE Pneumatic bench press, con- trolled by a foot operated pedal. Supplied with a multi-aperture die suitable for crimping insulated and uninsulated end sleeves e from 0,3 to 10. Compact and efficient. Easy to operate, producing a secure and reliable crimped connec- tion. 115
3 PNB-6KE PNB-7KE PNEUMATIC CRIMPING TOOLS Hand held - PNB series PNB-6KE Spiral hose length 0,25 2,5 / AWG 400 g Ø 44 x 200 mm 2 m PNB-7KE Spiral hose length 4 10 / 12 8 AWG 400 g Ø 44 x 200 mm 2 m PNB-6KE and PNB-7KE hand tools facilitate the rapid ing of insulated end sleeves crimpwhile avoiding the operator discomfort associated with ordinary manual tools. Lightweight and easy to use, these tools are ideal for panel building applications and component assembly. Both tools are designed to be maintenance-free and need no routine calibration. A 4-6 bar air supply is required for connection via the quick coupler fitted to the hose supplied with the tool. ECT-KE2.5 ELECTRICAL CRIMPING TOOL Portable Portable electrical crimping tool for end sleeves 0,14 to 2,5 with 13 mm crimp length. Crimping occurs automatically when the end sleeve activates an internal nal pressure switch. ECT-KE2.5 End Sleeves type PK.. and type KE Supply voltage: 220/230V 50Hz - Maximum operating temperature: 40 C - Crimp length: 13 mm 116
4 PNEUMATIC CRIMPING TOOLS Bench mounted tools with foot pedal - PNB series PNB-6KE-T PNB-7KE-T PNB-6KE-T 0,25 2,5 / AWG 1000 g Ø 140 x 200 x 70 mm Inclusive of spiral hose, foot pedal and bench mount with storage PNB-7KE-T 4 10 / 12 8 AWG 1000 g Ø 140 x 200 x 70 mm Inclusive of spiral hose, foot pedal and bench mount with storage PNB-6KE-T and PNB-7KE-T have bench mounts with storage and are foot pedal operated to allow operators to have both hands free when assembling cable harnesses. Both tools are designed to be maintenance-free and need no routine calibration. A 4-6 bar air supply is required for connection via the quick coupler fitted to the hose supplied with the tool. 117
5 ELB-3 BENCH PRESS for polycarbonate insulated chain connectors Electro-pneumatic, tic, duction bench press, con- protrolled by a foot operated pedal. Producing a consistent and reliable crimped nection. cone application Interchangeable heads available to suit the complete range of bonate insulated connectors. polycar- Air supply: 6 bar (90 psi) LxDxH: 180x250x620mm : 41 kg (without applicator heads) Motor: - Power 0,55 kw / 0,75 HP - Supply Voltage 220 V / 50 Hz - Speed turns/minute Type. INTERCHANGEABLE APPLICATOR HEADS, SIDE ENTRY WITH PNEUMATIC FEED (ORDER AS REQUIRED) Connectors RA-3 red 0,25 1,5 Polycarbonate insulated BA-3 blue 1,5 2,5 chain terminals GA-3 yellow 4 6 KE 1A-3 0,5 1 Insulated chain end sleeves KE 2.5A-3 1 2,5 File no. E File no. E OPERATING TEMPERATURE UP TO 115 C Conforms to DIN standard /4 See pages 6-7 and 16 for types and features of the insulated chain connectors and end sleeves. 118
CORDLESS HYDRAULIC TOOLS
CORDLESS HYDRAULIC TOOLS 18.0 V - 4.0 Ah CORDLESS TOOL FEATURES Head rotates through 180. Switch protected against accidental operation. Pressure release button. Slot-in battery with release button. LED
More informationTools. Contents Tools for contacts Han D Tools for contacts Han E Tools for contacts Han C
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.04 for contacts Han C... 99.06 for other contacts... 99.08 for FOC contacts... 99.10 for Han high current contacts... 99.12 Summary Han
More informationHYDRAULIC CRIMPING TOOL
HYDRAULIC CRIMPING TOOL HT 120 Crimping force kn 120 488 138 5,7 This lightweight and self contained tool will accept the semi-circular slotted dies, coon to most 130 kn tools. It is particularly suitable
More informationAround the cable. Pressing and crimping.... convincing solutions
Around the cable Pressing and crimping... convincing solutions 33 INFO HUPcompact The new HUPcompact is a handy, compact crimp tool that will be available in 4 variations: HUPcompact HC01 for insulated
More informationTools for other contacts Tools for FOC contacts Crimping machine TK-M Crimping machine TC-C
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.04 for contacts Han C... 99.06 for other contacts... 99.08 for FOC contacts... 99.10 for Han high current contacts... 99.12 Summary Han
More informationHYDRAULIC CRIMPING TOOL HYDRAULIC PRESSHEAD
HYDRAULIC CRIMPING TOOL HT 51 50 380 130 2,7 End sleeves Connectors 185 70 50 70 VAL P1* 445x290xh95 1,2 * Suitable for storage of the tool and 20 sets of dies. also the HT 51-KV version, for power supply
More informationAround the cable. Hydraulic crimping tools. Crimping without effort Universal use Low maintenance. haupa...technology that connects
Around the cable Hydraulic crimping tools Crimping without effort Universal use Low maintenance haupa...technology that connects Hydraulic crimping tools INFO Hydraulic crimping tools These hydraulic crimping
More informationEconomically Productive Universal applicable
Professional installation- and electrical connection technique druseidt battery operated tool program: Electro-hydraulic operated crimping- and cutting tools for industrial as well as applications in craft
More informationCrimping Press 82CE-061 Portable crimper for braided hoses
KarryKrimp 1 Crimping Press 82CE-061 Portable crimper for braided hoses KarryKrimp 1 textile braided hoses size -4 up to size -20 Easily portable for outside work Used for service with hand pump or airhydraulic
More informationTools. Contents Tools for contacts Han D Tools for contacts Han E Tools for contacts Han C
Contents Page for contacts Han D... 99.02 for contacts Han E... 99.03 for contacts Han C... 99.04 for Han-Modular and other contacts... 99.05 for FOC contacts... 99.06 Summary Han Crimping tools... 99.07
More informationYA TOOLS. ABCD Pneumatic hand tools. Crimping tools/machines
Crimping tools/machines ABC Pneumatic hand tools YA TLS These pneumatic hand tools operate on compressed air ranging from 75 to 5 PSI (5.0 to 6.0 kg/cm ){500 to 600kPa} for quick and accurate crimping,
More informationRange of Application: For Non-insulated cable Terminal Lug Capacity:1.5-10mm2 AWG:16-8AWG Length:220mm Weight:0.49Kg. Length:220mm Weight:0.
Crimping pliers adopt the principle of using the best leverage to effectively handle the design. Although the short and compact structure, especially in the larger horizontal pressure to the cross section
More informationHydro Swaging Machines Brochure
Hydraulic & Offshore Supplies Hydro Swaging Machines Brochure YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE SM 625 25-08 8 11 40 25-11 11-14
More informationPos. Description Reference
TD-13 Cover 01 Tank cover including Items 2+3 400.756 02 Filter 400.754 02 Filter (after week 39/98) 400.766 03 Tank cover 400.751 04 Seal for cover 420.723 05 Clean water tank cover 530.758 06 Washer
More informationOperating Instructions for CRIMPING TOOL HP 95
Operating Instructions for CRIMPING TOOL HP 95 TABLE OF CONTENTS CE Conformity Attestation Safety Regulations Operative Range... 1 Technical Specifications... 1 Operation... 1 Use... 2 Crimping... 3 Maintenance...
More informationTube Cleaners.
Tube Cleaners www.elliott-tool.com Tube Cleaners Table of Contents Pg. Tube Cleaners 2 5370 Jiffy Gun 3 537100C Jumbo Jiffy Gun 4 Jiffy Gun & Jumbo Jiffy Gun Spares & Accessories 5 Soot Buster 5 Soot
More information626 Pneumatic Tool System
Works with Existing AMP-Compatible Tools Catalog 12420 Revised 06-05 626 Pneumatic Tool System Effortless Alternative to Hand Crimping Maximize your productivity while minimizing your effortreplace your
More informationCrimping Equipment/Cut-Off Saws
/Cut-Off Saws RA20/RA20HP 1.1/4 VERTICAL CRIMPERS R20M 1.1/4 HORIZONTAL CRIMPERS PAGE 346 PAGE 347 1.1/4 INCH HAND PUMP, AIR/ HYDRAULIC PUMP COLOUR WHEEL MANUAL STOP R16HP 1 HORIZONTAL CRIMPER 1 INCH HAND
More informationModular portable crimper for braided hoses
, Tooling, Accessies KarryKrimp 1 Modular ptable crimper f braided hoses 1 and 2 steel wire textile braided hoses size -4 up to size -20 Parkrimp system advantages airhydraulic and electrical pump to be
More informationCrimping tools for D-Sub contacts Crimping tools for other contacts Crimping machine TC-C
Contents Page Hand crimping tools for Han standard contacts... 90.4 Pneumatic crimping tools for Han standard contacts... 90.9 Crimping tools for D-Sub contacts... 90.11 Crimping tools for Han TC high
More informationHydraulic Crimper 05
Hydraulic Crimper Hydraulic Tools As well as retaining most of the information from the last issue of the catalogue, we have added a large section on new products of interest to our industry. COMPRESSION
More information626 Pneumatic Tool System The Effortless Alternative to Hand Crimping
The Effortless Alternative to Hand Crimping Fast Facts Effortless crimping for a broad range of terminals, either bench-mounted or hand-held for working in cramped quarters. Lightweight tool eliminates
More informationKH-80 HYDRAULIC CRIMPER OPERATORS MANUAL
KH-80 HYDRAULIC CRIMPER OPERATORS MANUAL 1 SAFETY PRECAUTIONS READ AND IDENTIFY ALL COMPONENT PARTS BEFORE USING CRIMPER. CRIMPER CAN PRODUCE 80 TONS OF FORCE. KEEP BOTH HANDS AWAY FROM PINCH POINTS. CONSULT
More informationCRIMPERS AND CUTTERS. Information. CH Range. SC Range. BC Range. BC Accessories. HCH Range. CT Range. HWC Range. HSWC Range. HWRC Range.
RIMPERS ND UTTERS Information General information on crimping tools 122 H Range able crimping heads s 123 124 S Range Selfcontained cable crimping tools s 1 126 Range attery operated cable crimping tools
More informationCrimping Tools for Non - Insulated Terminals
Crimping Tools for Non - Insulated Terminals T-100 T-112 T-122 H-100N H-104 NH-12 NH-21 8 Crimping Tools for Non - Insulated Terminals T-100 Ratchet hand tool for crimping small (0.4mm 2 ) terminals. The
More informationD165-D160 SERIES HYDRAULIC HOSE CRIMPER OPERATORS MANUAL
Page D65-D60 SERIES HYDRAULIC HOSE CRIMPER OPERATORS MANUAL SAFETY PRECAUTIONS Page MODELS COVERED This manual is applicable to different variations of the D60 Series and D65 Series Crimpers. A Standard,
More informationSpecialist Tools and Accessories
Specialist Tools and Accessories 1.5T Crimpers C343 3T Crimpers C343 5T Crimpers C343 12 to 15T Crimpers and Crimp Heads C344 23 to 25T Crimpers and Crimp Heads C347 52 to 60T Crimpers and Crimp Heads
More informationTube Cleaners.
Tube Cleaners www.elliott-tool.com Tube Cleaners Table of Contents Pg. Tube Cleaners 2 5370 Jiffy Gun 3 537100C Jumbo Jiffy Gun 4 Jiffy Gun & Jumbo Jiffy Gun Spares & Accessories 5 Soot Buster 5 Soot
More informationRPS/DPS High Accuracy Resonant Pressure Sensor. GE Oil & Gas. Features:
GE Oil & Gas RPS/DPS 8000 High Accuracy Resonant Pressure Sensor Since 1972, Druck has manufactured precision pressure sensors with a capability to meet critical applications in industrial, aerospace,
More informationGREENLEE CUTTING, CABLE STRIPPING, CRIMPING
Manual Crimping Tool 6-Ton -Powered Crimping Tools EK22GL11 K425BG K425O 02064 Crimping Tool with D 3 and O die grooves K425BG 02065 Crimping Tool with D 3 and BG die grooves Designed for crimping a wide
More informationUNIQUE USER FRIENDLY MICROMETER STYLE ADJUSTMENT
The series hose crimper with Micrometer Style Adjustment and 80 ton cylinder has the capacity to crimp hoses up to 1-¼" 4 wire (with standard dies) and up to 1-¼" 6 wire and 2" 4 wire (with larger dies).
More informationRevisions to this application specification include: Updated document to corporate requirements Changed product types in table in Figure 6
This specification covers the requirements for application of PLASTI GRIP Terminals and Splices for commercial applications. The terminals and splices consist of precision formed metal wire barrel insulated
More informationRoto-Jet I & II Tube Cleaning Systems
Roto-Jet I & II Tube Cleaning Systems Tube Size Tube Section Deposit Thickness of Deposit Deposit Flush 0.312 to 2.000 Straight Soft, guy, Light (7.9 to 50.8) ID Curved or organic Medium Dry Elliott Tool
More informationCatalogue 2003/2004. Traction and rolling stock products. Signalling stationary equipment products. Tooling
Catalogue 2003/2004 Traction and rolling stock products Signalling stationary equipment products Tooling Set up in Corrèze (France) at Pompadour on a 6000 m 2 site, Mecatraction designs, develops and manufactures
More informationAUXILIARY ELECTRIC HEATER KITS FOR 7.5 AND 10 TON COMMERCIAL AIR HANDLERS
AUXILIARY ELECTRIC HEATER KITS FOR 7.5 AND 10 TON COMMERCIAL AIR HANDLERS WARNING: THIS ACCESSORY IS TO BE INSTALLED BY A QUALIFIED, LICENSED SERVICE PERSON. TO AVOID UN- SATISFACTORY OPERATION OR DAMAGE
More informationwwww.cablectrix.com tel:+44(0) The first electromechanical crimping tool with PowerSense technology
wwww.cablectrix.com tel:+44(0)1327 876769 TECHNOLOGY The first electromechanical crimping tool with PowerSense technology Times change. ELECTROMECHANICAL CRIMPING TOOL EK 50ML And so do requirements. Fast,
More informationTools for Cu-terminals mm², Al-terminals mm² (-35 solid) mm² and C-sleeves 6-50 mm²
Tools for Cu-terminals 10-240, Al-terminals 16-25 (-35 solid) and C-sleeves 6-50 T2600/T2600B/T2600C T2600/T2600B/T2600C Mechanical handtool for crimping of Cu- and Al-terminals: T2600 for KRF/KSF, T2600B
More informationTools for crimping terminals and connectors in Chapters 4, 5 and 7
Tools for crimping terminals and connectors in Chapters 4, 5 and 7 Tools for Cu-terminals 4-120 3 Battery powered crimp tool for Cu terminals 10-5 4 Tools for Cu-terminals, Al-terminals and C-sleeves 6-50
More informationTools for crimping terminals and connectors in Chapters 4, 5 and 7
Tools for crimping terminals and connectors in Chapters 4, 5 and 7 Tools for Cu-terminals 4-120 3 Battery powered crimp tool for Cu terminals 10-5 4 Tools for Cu-terminals, Al-terminals and C-sleeves 6-50
More informationMobileCrimp Crimper Die Selection Table For MegaCrimp. MobileCrimp. Die Sets (ordered separately) Digital Dial Control
MobileCrimp 4-20 Crimper This lightweight, versatile crimper is powerful enough to crimp up to 1-1/4" four spiral-wire hose Weighing approximately 57 pounds, this new field crimper combines the latest
More informationIsotemp. Improve the productivity of your laboratory with accurate, efficient temperature control products from Fisher Scientific.
Isotemp Bath Circulators and Chillers Improve the productivity of your laboratory with accurate, efficient temperature control products from Fisher Scientific. Choose the temperature control option that
More informationLevel V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline
Level V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline Product Facts Termination of discrete wire sizes 26-22 AWG [0.12-0.3 mm 2 ] as well as jacketed cable and bonded ribbon cable (conductors separated)
More informationCC25 HYDRAULIC CRIMPER OPERATORS MANUAL
CC25 HYDRAULIC CRIMPER OPERATORS MANUAL Page 2 SAFETY PRECAUTIONS READ INSTRUCTIONS AND IDENTIFY ALL COMPONENT PARTS BEFORE USING CRIMPER CRIMPER CAN PRODUCE 137 TONS OF FORCE. KEEP BOTH HANDS AWAY FROM
More informationCRIMPING PLIERS. 00 Crimp Grip Pliers A. EAN mm Pliers Applications. Capacity. Article No.
00 Crimp Grip Pliers for solder-free electrical connections quick release lever high contact pressure with minimum handforce using toggle lever transmission reproducible crimping quality with high tensile
More informationTHE CABLE ACCESSORY COMPANY THE BEST 30 YEARS
THE CABLE ACCESSORY COMPANY THE BEST 30 YEARS Tool Catalogue www.three-d.co.za Contents Cable and Wire Cutters (Hand-held) Wie Duct Cutters (Hand-held) Cable Tie Tensioning Tools Wire Strippers Pre-Insulated
More informationCRIMPING PLIERS. 00 Crimp Grip Pliers A. Capacity Article No mm Pliers Applications
00 Crimp Grip Pliers for solder-free electrical connections quick release lever high contact pressure with minimum handforce using toggle lever transmission reproducible crimping quality with high tensile
More informationCrimping Tools. For Non-Insulated Terminals. For Pre-Insulated Terminals. For Closed End Connectors. Tool-Terminals Cross Reference.
Crimping Tools For Non-Insulated Terminals For Pre-Insulated Terminals For Closed End Connectors Tool-Terminals Cross Reference Nippon Tanshi offers crimping tools for all of our standard products. Our
More informationUNIQUE USER FRIENDLY MICROMETER STYLE ADJUSTMENT
The series hose crimper with Micrometer Style Adjustment and 62 tons of crimping force has the capability to crimp hoses up -¼" -2 wire, -¼" 4 wire, and " 6 wire. UNIQUE USER FRIENDLY MICROMETER STYLE
More informationCutting Tools. Hydraulic cutting heads Hydraulic drive units Hydraulic systems
Cutting Tools Hydraulic cutting heads Hydraulic drive units Hydraulic systems Cutting tools Hydraulic cutting heads SDG 85 SDG 85, SDG 105 Hydraulic cutting heads max. Ø 85 mm and Ø 105 mm Cut armoured
More informationDRI-AIR INDUSTRIES, INC. HA750B B HOT AIR DRYER OPERATING MANUAL
HA750B - 1500B HOT AIR DRYER OPERATING MANUAL Page 1 DRI-AIR INDUSTRIES, INC. 16 THOMPSON ROAD P.O. BOX 1020 EAST WINDSOR, CT 06088-1020 Tel. (860) 627-5110 FAX (860) 623-4477 Internet http://www.dri-air.com
More informationPRE-INSULATED CRIMPING TOOLS. YYT-1 - Ratchet crimping tool for pre-insulated terminals
PRE-INSULATED YYT-1 - Ratchet crimping tool for pre-insulated terminals 254mm 0.603kg AWG 20-11 AP-03C - Ratchet energy saving crimping tool for pre-insulated terminals 0.55kg AWG 20-10 Continuous crimping
More informationWet and dry vacuum cleaners NT 48/1 (110V)
Wet and dry vacuum cleaners NT 48/1 (110V) Compact 48 litre wet & dry multi-purpose vacuum, with 110V power supply. Equipment: Suction hose 2.5 m Metal suction tube, 2 x 0.5 m Filter bag Paper Wet and
More informationCABLE & WIRE CUTTERS HAND-HELD. LK-38A - Cable and wire cutter for CU/AL. LK-22A - Cable and wire cutter for CU/AL
CABLE & WIRE CUTTERS LK-22A - Cable and wire cutter for CU/AL HAND-HELD LK-38A - Cable and wire cutter for CU/AL Up to 25mm 2 Max Diameter: 160mm 15mm 0.19kg Not Suitable for cutting steel wire, armoured
More informationRead these instructions thoroughly before crimping any terminals.
Figure 1 This instruction sheet covers the application and maintenance procedures for Pneumatic Crimping Head Assembly 314991 1. The crimping head assembly is designed for use in Pneumatic Tool 69015 to
More informationCables. Rubber and Control Cables H05VV-F. JZ flexible. F-CY-JZ - copper screened H07RN-F. Y-CY-JZ - copper screened, transparent H05RR-F
Cables 45 Rubber and Control Cables H05VV-F JZ 500 - flexible F-CY-JZ - copper screened H07RN-F Y-CY-JZ - copper screened, transparent H05RR-F SAT and Heat Reistant Cables Coaxial Cable SIF, SIF/GL, SIFF,
More informationPower Units & Test Systems
Advanced Air Driven Power Units Power Units & Test Systems Sprague Products Division of Curtiss-Wright Flow Control Corporation TECHNOLOGY THAT CHANGES EVERYTHING Air Driven Power Units Choose an air driven
More informationREVERSE CYCLE SOLAR PV-INVERTER
MALAYSIA S FIRST REVERSE CYCLE SOLAR PV-INVERTER AIR CONDITIONER AIR-CONDITIONER AND SOLAR pv PANELS Recommended Tools & Accessories for Installation & Maintenance Recommended Tools for Air Con Unit Installation
More informationCondensate drains WA/PWEA
Condensate drains WA/PWEA Condensate drains WA Function -Q- Temperature range 0 +60 C -L- Operating pressure 1.5 16 bar -H- Note In order to close, the automatic condensate drain WA-2 requires a flow rate
More informationTechnology The first electromechanical crimping tool with PowerSense technology Manual pre-clamping. Motorized crimping.
www.klauke.com Technology The first electromechanical crimping tool with PowerSense technology Manual pre-clamping. Motorized crimping. Fast, light, efficient the way you crimp today. Whether you want
More informationD100S-T420 Portable Service Hose Crimpers
The D00S-T420 Portable series hose crimper paired with either a ValPower Hand Pump, Pneumatic Pump or Multi-Electric Pump make the perfect combination for portable crimping requirements. UNIQUE USER FRIENDLY
More informationTools for crimping Cu, Al-/Cu terminals and connectors
Tools for crimping Cu, Al-/Cu terminals and connectors Tools for crimping Cu, Al-/Cu terminals and connectors Tools for Cu terminals 4-120 mm² 3 ELPRESS Mini PV350, battery powered crimp tool 5 SYSTEM
More informationPneumatic Flat Grips. Relevant Materials. Relevant Specimens
C224-E068A Pneumatic Flat Grips For tensile testing rubbers, plastics, elastomers, textiles, cloth, and paper, in specimen geometries such as plates, films, and wires, a good option is pneumatic flat grips.
More informationCUTTING & CRIMPING 12 Depliant Cutting Crimping Tools.indb :45
CUTTING & CRIMPING 2 QUALITY, THE SUPERIOR GOAL INTERCABLE STANDS FOR HIGH QUALITY Products and service! An efficient organisation, as well as a quality management according to the EN ISO 9001 international
More informationJOE SCHROEDER Apprentice Electrician
JOE SCHROEDER Apprentice Electrician From battery to ratchet, if it needs to be cut or crimped, Greenlee s got the tool. A Greenlee exclusive the Gator-Plus battery-powered 4-ton crimping tool brings tons
More information50 barg refrigeration dryers PoleStar Smart HP
50 barg refrigeration dryers Operation Cycling refrigeration dryers for high-pressure applications. The range PSH030-630 Recent technological advances and the use of highly sophisticated production processes
More informationRPS/DPS High Accuracy Resonant Pressure Sensor. GE Measurement & Control. Features:
GE Measurement & Control RPS/DPS 8100 High Accuracy Resonant Pressure Sensor For over 35 years, Druck has manufactured precision pressure sensors with a capability to meet critical applications in industrial,
More informationMechman 170-Amp Alternator Cable Kit (220013)
an ISO 900:2008 Registered Company Mechman 70-Amp Alternator Cable Kit (22003) 8865 Goll St. San Antonio, TX 78266 Phone: 20-654-77 Fax: 20-654-33 www.vintageair.com 90723 REV B 07/29/6, PG OF 8 Table
More informationMC2501 OPERATING AND CALIBRATION INSTRUCTIONS
MC2501 OPERATING AND CALIBRATION INSTRUCTIONS CONTENTS 1 - CERTIFICATE OF CONFORMITY... 3 2 DESCRIPTION.... 4 2. 1 - GENERAL... 4 2. 2 - CHARACTERISTICS... 4 2. 3 WORKING PRINCIPLE.... 5 2. 3. 1 Hydraulic
More informationDewatering Pumps. Construction Starts Here. Centrifugal and Diaphragm Models.
Dewatering Pumps Centrifugal and Diaphragm Models Construction Starts Here www.multiquip.com Centrifugal Pumps Discharge port easily rotated 180 by removing four bolts. Tubular steel frame protects pump
More informationHydraulic Crimping Head, PN 69069
Hydraulic Crimping Head, PN 69069 Instruction Sheet 408-1745 31 JUL 17 Rev F 1. INTRODUCTION Figure 1 This instruction sheet covers application, inspection and maintenance procedures for DYNA-CRIMP* Crimping
More informationHorizontal, Vertical and Mobile Test Beds Horizontal Test Beds All Chant Engineering Horizontal Test Beds come standard with fully enclosed hydraulically operatored safety guards (ends, top, bottom) for
More informationD105M COMPONENT IDENTIFICATION
D105M COMPONENT IDENTIFICATION 1 35 TON HYDRAULIC CYLINDER REMOVABLE PUSHER OIL FILL AND VENT PLUG PNEUMATIC START/STOP SWITCH 110 VOLT HYDRAULIC PUMP ADJUSTABLE RAM RETRACTION STOP MICRO-CRIMP ADJUSTER
More informationHydraulic Crimping Head, PN
ORIGINAL INSTRUCTIONS Hydraulic Crimping Head, PN 1752868-1 Instruction Sheet 408-8959 19 JUL 17 Rev C 1. INTRODUCTION Figure 1 This instruction sheet covers application, inspection and maintenance procedures
More informationABDAR AL-RIYADH FOR TRADING. KW Hydraulic Tools. Adnan F. H. Sabbubeh
KW Hydraulic Tools by Adnan F. H. Sabbubeh HS-85-G HS-85-G Hydraulic Cable Cutter for steel armed copper and aluminum cable incl. steel case, green (RAL6018) Diameter: 85 mm Cutting force: 60 kn KT-52
More informationCrimping tool HHs-6. Art convincing solutions. Video
Hydraulic crimping tools INSTRUCTION MANUAL Crimping tool HHs-6 Art. 215765 Video 215765 1. Technical data Art. 215765 Area of application: For the creation of an electrical connection by means of compression
More informationRK12ID Remote Dieless Crimping Tool
INSTRUCTION MANUAL Serial Number RK12ID Remote Dieless Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More informationCT-930CH, CT-930LPCH and CT-940CH TABLE OF CONTENTS
CT-930CH, CT-930LPCH and CT-940CH PA22141A01 Rev. 03 5-2012 REMOTE HYDRAULIC COMPRESSION TOOLS Panduit Corp. 2012 TABLE OF CONTENTS SYSTEM SPECIFICATIONS... 1 OPTIONAL ACCESSORIES... 2 PRECAUTIONS AND
More informationSeries P215LR/BR Single/Dual Pressure Input Condenser Fan Speed Controllers For Single Phase Motors (incl. built-in RFI suppression filter)
PSC9713 European Refrigeration Controls Catalogue Catalog Section 4 Product Bulletin Series Single/Dual Pressure Input Condenser Fan Speed Controllers For Single Phase Motors (incl. built-in RFI suppression
More informationBreeder.
Breeder www.tavsan.com.tr CHAIN FEEDING Tavsan chain feeding system is specially designed for breeders. With its simplicity both pallet and dust feed can be distributed to the birds easily. Its strong
More informationfor relative humidity and temperature
1 860 1860P01 Duct sensor for relative humidity and temperature QFM651 Operating voltage AC 24 V Signal output DC 010 V for relative humidity Signal output L&S Ni 1000 (passive) for temperature Measurement
More informationA. Capacity mm² AWG g A burnished insulated terminals and plug connectors with multi component grips
Crimp Grip Pliers 00 > for solder free electrical connections > quick release lever > high contact pressure with minimum handforce using toggle lever transmission > reproducible crimping quality with high
More informationGOLDENCRIMP/450 - THE ONLY CRIMPING MACHINE YOU WILL EVER NEED
GOLDENCRIMP/450 GOLDENCRIMP/450 - THE ONLY CRIMPING MACHINE YOU WILL EVER NEED Providing reliability and versatility in harsh environments, the GoldenCrimp /450 crimping machine is the perfect addition
More informationHydraulic Crimping Head, PN
Hydraulic Crimping Head, PN 1673672-1 Instruction Sheet 408-8910 14 JUL 17 Rev C PROPER USE GUIDELINES Cumulative trauma disorders can result from the prolonged use of manually powered hand tools. Hand
More informationtools and accessories for crimp contacts
The crimping concept The crimp connection is an irreversible connection between one or two conductors and a crimp contact. The crimp connection is obtained by pinching or pressing the contact metal - or
More informationElectric Automatic Carpet Extractor. Operator and Parts Manual. Model No.: Rev. 00 (11-99)
1520 Electric Automatic Carpet Extractor Model No.: 607649 Operator and Parts Manual TENNANT COMPANY Commercial Products 12875 RANSOM STREET HOLLAND MI 49424 U.S.A. FAX: 1 800 678 4240 CUSTOMER SERVICE:
More informationYES HOSE CRIMPING MACHINES
HOSE CRIMPING MACHINES YES YOU CAN Parker KarryKrimp Need to replace a faulty hose assembly? Site too far from a ParkerStore and out of range of a Hose Doctor Service? Just one solution: a KarryKrimp mobile
More informationCOMMON WORK RESULTS FOR ELECTRICAL: Basic Electrical Materials Methods
1. BASIC ELECTRICAL MATERIALS 1. All conduit and raceway must be 3/4" or larger. Exposed raceway in finished areas shall be in 700 or larger wiremold. Exception: runs to individual devices 10 or less,
More informationProduct Catalogue. H-Line Crimping. Cutting. Skiving. Cleaning. Accessories Measuring & Handling
Product Catalogue H-Line Crimping Cutting Skiving Cleaning 5 10 Measuring & Handling Accessories Hydroscand Machine AB The Original Assembly Machines Hydroscand Machine AB presents a wide range of assembly
More informationteambrite Supply Steambrite Supply Created on: : Tuesday 16 April, 2019
Model Number: HLB-15-US Koblenz HLB-15-US 1700 PSI Electric Pressure Washer 00-2930-6 Manufacturer: Koblenz 1700 PSI Electric Pressure Washer Koblenz HLB-15-US 1700 PSI Electric Pressure Washer, 00-2930-6
More informationEdition 8, From serial no Publ. no OM 5030, Orwak 5030 OPERATING INSTRUCTIONS (IN THE ORIGINAL)
Edition 8, From serial no. 106000- Publ. no 4869699-00 OM 5030, 2012-02 Orwak 5030 OPERATING INSTRUCTIONS (IN THE ORIGINAL) English CONTENTS Safety...8 2 Operating instructions...9 3 Technical specifications...10
More informationTHE PRODUCTS YOU NEED. THE QUALITY YOU WANT. THE INNOVATION YOU DESERVE.
THE PRODUCTS YOU NEED. THE QUALITY YOU WANT. THE INNOVATION YOU DESERVE. Portable Chillers s P O RTA B L E C H I L L E R S SMC Series 1/2 to 3-1/2 HP Portable Chiller SMC ½ to 1½ HP Features: Environmentally
More informationApplication Tooling. Effective February Compression Connectors and Tools. Terminal Products and Tools
Application Tooling Compression Connectors and Tools Terminal Products and Tools Insulation Piercing Connectors Grounding Connectors Cable Fastening Systems Wiring Duct and Accessories Wire and Connector
More informationMECHANIC CRIMPING TOOLS
32 MPUSET UEIQ6 UEQ10 UEAE10T Oval Indent 0,5-6 mm² 0,5-10 mm² 0,14-10 mm² insulated terminals terminals and pin terminals wire end sleeves Set Crimping Tool MPUSET 220 mm 900 g Die for insulated terminals
More informationTechnical Datasheet. Suction Controllers, Flow Meters & Accessories
Suction Controllers, Flow Meters & Accessories Pneumatech MGS s, vacuum suction units and accessories are designed for connection to medical gas terminal units, providing the interface between patient
More informationSwaging Machine Type H50-46ECO
ENDEAVOUR Int. Ltd. Tel +44 (0) 1225 446770 Fax +44 (0) 1225 446775 USER MANUAL Swaging Machine Type H50-46ECO Website: www.hydralok.net CONTENTS WARRANTY CONDITIONS... 3 EC DECLARATION OF CONFORMITY...
More informationWet and dry vacuum cleaners NT 27/1
Wet and dry vacuum cleaners NT 27/1 The NT 27/1 is a powerful wet/dry vacuum cleaner for professional users. It is exceptionally compact and comes standard with a number of useful accessories. Suction
More informationHARTING Han M23 Circular Connectors
HARTING Han M23 Circular Connectors Han M23 circular connectors Contents Page Overview Features....02 Approvals....02 Technical characteristics....03 Hoods and housings Hoods....04 Bulkhead mounted housings....06
More informationHydraulic Crimping Heads and
Hydraulic Crimping Heads 58422-1 and 2161730-1 Instruction Sheet 408-9535 30 MAY 17 REV D 1. INTRODUCTION Figure 1 This instruction sheet covers application, inspection and maintenance procedures for Crimping
More information12 Ton Hydraulic Crimping Head, PN
12 Ton Hydraulic Crimping Head, PN 1490745-1 Instruction Sheet 408-8713 07 AUG 17 Rev B 1. INTRODUCTION Products Crimped Corresponding Die Set Instruction Sheet AMPOWER* Terminals and Splices, 6-3/0 AWG
More informationHand Held Welding Guns
Type Rion handheld device to weld thermoplastic materials for roofers, flooring tilers, membrane processors, synthetic material processors, etc. handy, building site-proved stepless adjustments temperature
More information