Range of Application: For Non-insulated cable Terminal Lug Capacity:1.5-10mm2 AWG:16-8AWG Length:220mm Weight:0.49Kg. Length:220mm Weight:0.

Transcription

1 Crimping pliers adopt the principle of using the best leverage to effectively handle the design. Although the short and compact structure, especially in the larger horizontal pressure to the cross section of wire, the operation will be very effective. *Applicable for non-welding,complied with the standard electrical connection. *The design of accurate crimping moulds and complete locking(self locking and releasing mechanic unit) ensure high of crimping quality when crimping repeatedly. MG-10I MG-10 Range of Application : For Insulated Terminal Lug Capacity: mm2 AWG:20-10AWG Range of Application: For Non-insulated cable Terminal Lug Capacity:1.5-10mm2 AWG:16-8AWG MG-04EH MG-10EH Capacity: mm2 AWG:20-12AWG Capacity:1.0-10mm2 AWG:17-7AWG

2 Crimping pliers adopt the principle of using the best leverage to effectively handle the design. Although the short and compact structure, especially in the larger horizontal pressure to the cross section of wire, the operation will be very effective. *Applicable for non-welding,complied with the standard electrical connection. *The design of accurate crimping moulds and complete locking(self locking and releasing mechanic unit) ensure high of crimping quality when crimping repeatedly. MG-35EH & MG-50EH MG-6ST Capacity:10,16,25,35mm2 & for MG-50EH - 25,35,50mm2 AWG:8-2AWG Range of Application: For non-insulated open Snap On type Capacity: mm2 AWG:20-10AWG Page No: 02

3 MG-70H Hydraulic Crimping Tools (Hexagonal type) MG-120H Hydraulic Crimping Tools (Hexagonal type) Max.pressure(T) - 8 Max. stroke - 12 Crimp range Size of standard dies G.W. (Kg) Volume (cm) - (1/5) Max.pressure(T) - 10 Max. stroke - 14 Crimp range Size of standard dies G.W. (Kg) Volume (cm) - (1/5) MG-300H Hydraulic Crimping Tools (Hexagonal type) MG-400H Hydraulic Crimping Tools (Hexagonal type) Max.pressure(T) - 16 Max. stroke - 22 Crimp range Size of standard dies G.W. (Kg) Volume (cm) - (1/4) Max.pressure(T) - 16 Max. stroke - 24 Crimp range Size of standard dies G.W. (Kg) Volume (cm)

4 Separable Hydraulic Crimping Tools (Hexagonal type) Model Max Pressure (T) Max Stroke Crimp range Size of standard dies G.W. (kg) Volume (cm) MG MG MG

5 HX Series Copper Tube Terminal Crimping Tool The crimping tools is used for non-welding and standard electrical connection. The mould of the crimping dies is made of SCM-40 hardest tool steel, It is with the characteristics of long life, accurate bore diameter and good crimping effect Part Numbers Range of Application Capacity (mm2) Length Weight (kg) MG-50BS BS Standard type terminals MG-50SC For SC cable lugs MG-120 BS, DIN, SC standerd Type Terminal