Quick lnterchange Ratcheting Crimper Frame. Ratching release trigger

Transcription

1

2

3 CP-3005F Quick lnterchange Ratcheting Crimper Frame Quick Die Change without tools : AISI 4140 HRC43 ±2 (Die not included) Interchangeable die with quick release trigger : S50C HRC: 45 ±3 Crimping pressure adjustment Elastomeric resin, double TPR structure. Ratching release trigger Special quick release trigger design for easy die changes without extra tools HRC OAL Body Handle Body S50C TPR 45 ±3 226/9.3 Blister card CrimPro Crimp Frame force saving 30% Lever action design Crimping pressure adjustment wheel Ratcheting release trigger Change Dies with thumbscrews. Replacement Die Screw Elastomeric resin, double structure. non-slip. Right angled head design prevents awkward wrist bending during operation Interchangeable die with thumbscrew HRC Body Handle Body Replacement Die Screw OAL S45C TPR 45 ± /9.3 Blister card We provide a variety of optional dies to meet the most applications, please contact our sales department to discuss custom needs. All dies on pages fit these frame 53 53

4 Ergo-Lunar Crimp Frame force saving 50% Lever action design Ingerchangeable die wih thumbscrew Ratchet crimping action provides repeatable and reliable terminations S45C medium carbon steel HRC: 45 ±3 Ratching release tigger Crimping pressure adjustment PP sleeve handle 40%~50% lower crimping force Interchangeable die with thumbscrew HRC Body Handle Body Replacement Die Screw OAL S45C PP 45 ± /10.2 Blister card Replacement Die Screw Lunar Crimp Frame AISI 4140 Alloy steel HRC: 43 ±2 S45C medium carbon steel HRC: 45 ±3 Compact size for easy operation Crimping pressure adjustment Elastomeric resin fitting exactly and double structure. Non-slip. Green: PP Balck: T.P.R Ratcheting release trigger (8.5" 220mm) : Blister card Replacement Die Screw HRC Body Handle Body Replacement Die Screw OAL S45C PP+TPR 45 ± /8.6 Blister card We provide a variety of optional dies to meet the most applications, please contact our sales department to discuss custom needs. All dies on pages fit these frame

5 Ergo-Lunar Crimp Frame DIE Set Crimp die profile Crimp Size Terminals Description Model No. RG8/11/174/179/ Lunar Crimp Frame Amphenol and General RG58,RG59,RG62, BNC/TNC, F-Type, LMR-240 HDTV, SMA, True 75-ohm BNC/TNC & mini-uhf,rg174, RG59/62, mini-coaxial & Belden 1855A RG58, 59 and 62 AU, BNC and TNC 3-piece connectors HDTV BNC/TNC 3-piece coaxial connectors HDTV true 75-ohm BNC/TNC coaxial connectors: Belden 1855A, 1865A, 1505A, 1505F, 1694A, 1694F HDTV BNC/TNC 3-piece coaxial connectors HDTV BNC/TNC true 75-ohm coaxial connectors, RG6, Belden 1694 & 1694A BNC, TNC, Mini-UHF, RG58, 141, 142, 303, 400, 59, 62, 210 Belden 8279, 8281, 9231, 9141 RG-6, 212, 222, 304 RG59 and Belden 8281/1694A cable groups for both 50 & 75 ohm center pins HDTV true 75 ohm BNC/TNC & CATV "F" coaxial connectors, RG59, RG6, Belden 8281, 1694A & 1505A CATV "F" connectors RG-59, RG-6 and RG-6 Quad RG8, RG11, RG213, RG216 BNC. TNC and N Series Connectors LMR400 Crimps Amphenol connectors. Coaxial - Belden 7810A, 9913, 9914, LMR 400. Combi-Die for RJ45 WE/SS Modular plugs and RG6/6Q(CATV F-Type) Coaxial Connectors HEX:.100"/.128"/.429" HEX:254,3.25,10.90mm SQ.052", HEX.068",.100",.213",.255" SQ1.32, HEX1.73, 2.54, 5.41, 6.48mm SQ.042", HEX.068,.178",.197,.255" SQ 1.07mm, HEX1.73, 4.52, 5.00, 6.48mm HEX.068",.213",.256" HEX1.73, 5.41, 6.5mm SQ.042", HEX.178",.275" SQ 1.07mm, HEX4.52, 6.99mm HEX.041",.068",.178",.255",.278" SQ1.04, HEX1.73, 4.52, 6.48, 7.06mm SQ. 042", Hex. 197",.278" SQ1.07mm, HEX 5.00, 7.06mm SQ.042", HEX.068",.275",.278" SQ1.07mm, HEX1.73, 6.99, 7.06mm HEX.068",.098",.213",.255",.321" HEX1.73,2.49, 5.41, 6.48, 8.15mm HEX.042",.068",.255",.324" HEX1.07, 1.73, 6.48, 8.23mm SQ.042",.052", HEX.068",.255",.324" SQ 1.07, 1.32mm, HEX1.73, 6.48, 8.23mm HEX.255",.320",.350" HEX6.48, 8.13, 8.89mm HEX.80",.100",.429" HEX2.03, 2.54, 10.90mm HEX.429",.118" HEX10.89, 3.00mm RJ45 plug HEX.324",.360" HEX 8.23, 9.14mm CrimPro Crimp Frame CP-3005F Quick lnterchange Ratcheting Crimper Frame Note: CP-3005F sold as frame only, but all dies on this page fit it Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die PK-3003D34 Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die PK-3003D33 Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die PK-3003D30 Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die PK-3003D31 Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die PK-3003D32 Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die PK-3003D29 Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die

6 Ergo-Lunar Crimp Frame Lunar Crimp Frame CrimPro Crimp Frame CP-3005F Quick lnterchange Ratcheting Crimper Frame DIE Set Crimp die profile Crimp Size Terminals Description Model No. RG174,RG179 Belden 8218, fiber optics. For FC,SC,ST,LC, SMA & MT-RJ fiber optics. SMA,SMB, FC Biconic and SC & ST fiber optic connectors,rg58,rg174,belden8218 Fiber Optic and Coaxial SMA/SMB/ SFR Connectors SC/ST/FC Miniature Insulated Terminals Nylon and Vinyl Red, Yellow, Blue Insulated terminals AWG 10-12, 14-16, Nylon and Vinyl Thin Style Insulated Terminals(red/yellow/blue) Nylon and Vinyl Insulated Terminals Uninsulated Terminals Open Barrel Contacts Molex/Tyco D-Sub, Molex, AMP Style Pin Fiber Optic Connectors SQ.042", HEX.068",.078",.128",.151",.178" SQ1.07, HEX1.73, 1.98, 3.25, 3.84, 4.52mm HEX.139",.151",.178", RD.134",.190" HEX3.53, 3.84, 4.52mm, RD3.40, 4.83mm SQ.042", HEX.068",.151",.178",.213" SQ1.07, HEX1.73, 3.84, 4.52, 5.41mm HEX.151",.178",.213" HEX3.84, 4.52, 5.41mm Electrical and Industrial Terminals AWG26-16 DIN mm 2 AWG22-18/16-14/12-10 DIN / / mm 2 AWG22-18/16-14/12-10 DIN / / mm 2 AWG22-18/16-14/12-10/8 DIN / / /10.0mm 2 AWG20-18/16-14/12-10/8 DIN / / /10.0mm 2 AWG30-24/22-18 DIN / mm 2 Note: CP-3005F sold as frame only, but all dies on this page fit it Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die CP-336DF4 Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die CP-336FD27 Ergo-Lunar frame w/die 1PK-3003FD27 CrimPro frame w/die CP-372FD27 9PK-3003D27 Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die PK-3003D36 Lunar frame w/die Open barrel contacts D-sub, Molex, AMP style pin AWG20-18/16-14/12-10 DIN / / mm 2 Ergo-Lunar frame w/die CrimPro frame w/die For Red and Blue Insulated Flag Terminals AWG 22-18, AWG22-18/16-14 DIN / mm 2 Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die For Yellow and Blue insulated Flag Terminals AWG16-14/12-10 DIN / mm 2 Ergo-Lunar frame w/die CrimPro frame w/die PK-3003D42 Lunar frame w/die Uninsulated Flag Terminals AWG22-18/16-14 DIN / mm 2 Ergo-Lunar frame w/die CrimPro frame w/die

7 Ergo-Lunar Crimp Frame Lunar Crimp Frame CrimPro Crimp Frame CP-3005F Quick lnterchange Ratcheting Crimper Frame Note: CP-3005F sold as frame only, but all dies on this page fit it DIE Set Crimp die profile Crimp Size Terminals Description Model No. Wire ferrules (Insulated and Non-Insulated) Wire Ferrules (Insulated and Non-Insulated) Wire Ferrules (Insulated and Non-Insulated) Spark Plug Cable-Cut, Strip, Crimp Electrical and Industrial Terminals AWG22/20/18/16/14/12 DIN 0.5/0.75/1.0/1.5/2.5/ 4.0mm 2 AWG10/8/6 DIN 6/10/16mm 2 AWG6/4/2 DIN 16/25/35mm mm Spark plug wires Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die D Ergo-Lunar frame w/die CrimPro frame w/die PK-3003D26 Solar Series Crimpers Multi-Contact (MC3)Ø3mm solar contacts Multi-Contact (MC4)Ø4mm solar contacts Solar Terminals AWG14/12/10 DIN 2.5/4.0/6.0mm 2 AWG14/12/10 DIN 2.5/4.0/6.0mm Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die CP-5S1D Lunar frame w/die Ergo-Lunar frame w/die CrimPro frame w/die CP-5S2D PowerPole Crimper Phillips long screw that holds the locator in place OAL S45C 203/8.12 Blister card DIE Set Crimp die profile Description Model No. D-Subminiature contacts, RS232 pins & sockets AWG Open Barrel contacts (Molex/ AMP style) Completed set with die Frame only PowerPole is a registered trademark of Anderson Power products OAL Wire Ferrules AWG Completed set with die Frame only S45C PowerPole modular connector #15(20~16 AWG/0.5~1.0mm 2 ) #30(16~12 AWG/1.0~2.5mm 2 ) #45(14~10 AWG/1.5~4.0mm 2 ) 260/10.2 Blister card 57 57

8 CP-3006F Parallel Action Crimping Tool Features: Reliable: Parallel action crimping performance is consistent and accurate Practical: Safety crimp release helps eliminate rejected terminations due to incorrect positioning. Comfortable: Ergonomically shaped non-slip TPR handle for comfortable use in all conditions Versatile: Interchangeable die sets for wide range of applications. Special design perfect fit for open barrel terminal and solar connectors Interchangeable crimp dies with one grip Parallel crimping action : S50C HRC: 45 ±3 Model No. CP-3006F Replacement Die model no. DIE Set Crimp die profile Frame only Terminails Crimping pressure adjustment CP-3006FD Non insulated open barrel connectors, commercial type AWG 22-18/16-14/12-10 DIN / / mm² JIS / / mm² Non-slip TPR Handle CP-3006FD36 9PK-3003D36 Non-insulated open barrel connectors & D-SUB V.35 contact pins AWG 30-24/22-18 DIN / mm² JIS / mm² Ratcheting release trigger CP-3006FS1 CP-5S1D For MC 3 solar connector (Multi-Contact) & 2.5/4.0/6.0 mm² (AWG 14/12/10) solar cable AWG 14/12/10 DIN 2.5/4.0/6.0 mm² Body Handle HRC OAL. S50C TPR 45 ±3 254/10 Blister card CP-3006FS2 CP-5S2D For MC 4 solar connector (Multi-Contact) & 2.5/4.0/6.0 mm² (AWG 14/12/10) solar cable AWG 14/12/10 DIN 2.5/4.0/6.0 mm² Crimper with Weatherpack Die Special design to be used with weatherpack weathertight connecters Reliable: Parallel action crimping performance is consistent and accurate Practical: Safety crimp release helps eliminate rejected terminations due to incorrect positioning. Comfortable: Ergonomically shaped non-slip TPR handle for comfortable use in all conditions Versatile: Interchangeable die sets for wide range of applications. Parallel crimping action Interchangeable crimp dies with one grip : S50C HRC: 45 ±3 Crimping pressure adjustment Non-slip TPR handle Pin (not included) Sealing Plug (not included) Weatherpack Die Ratcheting release trigger Body Handle HRC OAL. S50C TPR 45 ±3 254/10 Blister card Model No. Description Crimper with Weatherpack Die Crimp die profile Weather Pack Terminals & Seals Crimp size : AWG 14-16/18-20/22-24 Terminals 58 58

9 PK-2061 Solar MC3 & MC4 Crimping Tool Kit This is a complete tool kit to install MC3 & MC4 solar connectors easily and accurately. To open the locking device To secure Includes 2 pcs MC4 and MC4 PLUS open-end spanner and unlocking tool help you opening the locking device, securing and tightening the cable gland. Universal solar cable stripper comes with adjustable length stop for reliable stripping of the double layer insulated cables ( mm²) 11"x7.8"x2.8" To tighten the cable gland Contents: Parallel Action Crimper frame Die set for MC 3 solar connector (Multi-Contact) & 2.5/4/6m 2 (AWG 14/12/10) solar cable. Die set for MC 4 solar connector (Multi-Contact) & 2.5/4/6m 2 (AWG 14/12/10) solar cable. Universal solar cable stripper, for 2.5/4/6m 2 (AWG 14/12/10) solar cable Forging cable cutter (160mm), for copper cable: 25mm² flexible 2 Pcs Open-end spanner and unlocking tool (MC4 and MC4 PLUS) Pro-soft screwdriver 5x75mm Pro-soft screwdriver #2 x100mm Zipper carrying bag (mm)/11"x7.8"x2.8" The Parallel action crimper features consistent and accurate performance Heavy duty Forged Cable Cutter with high leverage Jaw and shear blade for clean cut without damage. Prosoft screwdrivers for PV junction box installation Professional Modular Crimps Strips & Cuts Tool For AMP style connectors only For crimping modular plugs in parallel action. Cuts, strips, and crimps modular plugs without changing modular (DIE) set. AMP only CP-376K Stewart Style (Standard) 10P 10C, AMP 8P8C/RJ-45 only Stripping twisted pair round cable Model No. Handle HRC Replacement blade CP-376K S45C Black:T.P.R Green:PP 45 ±3 10P10C, AMP 8P8C/RJ45, 6P6C/RJ12, 6P4C/RJ11, 4P4C & 4P2C/RJ22 plugs, and DEC/Offset 6P6C plugs 8P8C/RJ-45, 6P6C/RJ11, 4P4C & 4P2C/RJ22 plugs, and RJ11/6P6C DEC-Offset plugs - 205/8.1 5PK-376K- BLADE(6pcs/pack) 205/8.1 Blister card 59 59

10 P/6P/8P Telecom Crimping Tool Ratcheted Modular Plug Crimper 4/6/8P Crimpering Economy Grade Strips twisted pair wire B(6pcs/pack) Strips flat telephone wire Model No. Handle HRC Replacement blade S45C Black:T.P.R Green:PP 45 ±3 8P8C/RJ45, 6P2C/6P4C/6P6C RJ11 modular plugs, RJ-22 4P2C/4P4C handset modular plugs B (6Pcs/pack) 190/7.5 Blister card Carbon steel PP/TPR 45 ±3 for 4/6/8P modular connector - 190/7.5 Blister card Modular Crimping Tool Crimping Stripping CP-376M (2pcs/pack) Cutting Model No. Handle HRC Replacement blade CP-376M S45C S45C Black:T.P.R Green:PP HV 555~650 8P8C/RJ45, 6P2C/6P4C/6P6C RJ11 modular plugs, RJ-22 4P2C/4P4C handset modular plugs Black:T.P.R Green:PP CP-333 Modular Plug Crimping Tool (2pcs/pack) 225/8.9 Blister card HV 555~650 8P8C/RJ45, 6P2C/6P4C/6P6C RJ11 modular plugs (2pcs/pack) 216/8.5 Blister card Pro-Crimper Modular Tool Nwe mechanism force saving Cutting round cable Crimping 6P/8P Stripping UTP/STP round cable B (6pcs/pack) Handle PVC coated Body ABS + Carbon Steel For stripping UTP/STP cable and cutting function For crimping RJ-45 (8P8C), RJ-11/12(6P6C/6P4C/6P2C) modular plugs OAL (mm/ inch) 143/5.6 Blister card ABS + carbon steel 8P8C/RJ45, 6P2C/6P4C/6P6C RJ11 modular plugs, RJ-22 4P2C/4P4C handset modular plugs Replacement blade B (6Pcs/pack) 160/6.3 Blister card 60 60

11 Modular Crimping Tool Economy All-In-One Modular Plug Crimper Lock for easy storage 5CP-376E-B (2pcs/pack) (2pcs/pack) Model No. Handle HRC Replacement blade Low carbon steel PP 45 ±3 8P8C/RJ45, 6P2C/6P4C/6P6C RJ11 modular plugs 5CP-376E-B (2pcs/pack) 200/7.9 Blister card S45C PP 45 ±3 8P8C/RJ45, 6P2C/6P4C/6P6C RJ11, DEC/MMJ modular plugs (2pcs/pack) 200/7.9 Blister card / / Modular Crimping Tool Safety latch Stripping flat telephone cable Modular Plug holder Stripping UTP/STP Cable All-steel construction pin 6-pin 8-pin For Safety Guide Model No. Handle HRC B(6pcs/pack) Telecom Splice Crimp Tool Replacement blade RJ22 4P2C/4P4C handset modular plugs (6pcs/pack) 205/ Low carbon Black:T.P.R steel Green:PP 45 ±3 6P2C/6P4C/6P6C RJ11/RJ12 modular plugs (6pcs/pack) 205/ P8C RJ45 modular plugs B(6pcs/pack) 190/7.5 CP-148 Cutter/Stripper & Crimper Blister card Designed for UG. UR and UY connectors. A special stop behind cutout prevents connectors from damage. Stripper:0.8 and 1.4mm stripping holes for AWG 24/22 &20/18/16 Pliers:Long nose design for easy wire bending, pulling and holding Cutter:Steel body with black oxide finish Crimper:For UR/UY/UG,AMP tel splice connector,709 series connectors Stripper Cutter Crimper Crimp Size UR / UY / UG connectors Solid copper wire UR:19 to 26 AWG UY:22 to 26 AWG UG:19 to 26 AWG 150/5.9 Blister card Plier Thomas & Betts/ AMP tel splice 3M Scotchlok UR/ Belden 709 connectors connectors UY/UG tel splice connectors HRC OAL. Body Handle Body Cutting edge S55C PVC /6.6 Blister card 61 61

12 CP-418 Copper Clad Steel Coaxial Cable Crimper All in one design-for cutting & stripping & crimping RG6 and RG59 coaxial cable. Strips coaxial cable- By 2 steps for outer jacket at 1/4 & center core at 1/4 or 5/16. Precision stripping hole- For removing inner dielectric insulation without damaging the center conductor F-type Hex Crimper Made of carbon steel with black oxide finish for corrosion resistance and durability. Force- saving ratcheting mechanism design requires less force than general hand tools. Safety ratcheting release trigger helps eliminate rejected terminations due to incorrect positioning. Ergonomically shaped non-slip handles for user comfort. Interchangable die sets for wide range of applications. Stripping length guide 1/4" 5/16" 1/4" 5/16" 1/4" Plier Style Economy Crimper For RG59/62/6 and F-connectors 1/4" OAL. Body Handle S45C PVC RG6,RG /8.5 Blister card Handle Crimp size Carbon steel TPR+PP CATV F connector, RG59, RG6 Hex 0.068, 0.262, 0.324, Crimper Wire Ferrles Self-Adjusting 223/8.8 Blister card Self-Adjusting Handle HRC Carbon steel PVC 45 ±3 RG59/62, 6 hex type, F connector Fiber Optic Crimping Tool 200/8 Blister card Handle HRC S45C PP 45 ±3 Heavy Duty Coaxial Crimping Tool For Insulated and Non-Insulated Wire Ferrules and AWG20-12 wire "F" Type Crimper 205/8.1 Blister card Adjustable Disc Adjustable Disc Model No. Handle HRC S45C DIE: AISI 4140 S45C DIE: AISI 4140 S45C DIE: AISI 4140 PP PP PP 45 ±3 45 ±3 46 ±3 SC & ST fiber optic connectors HEX.122",.133",.151",.188" HEX 3.10, 3.38, 3.84, 4.78mm RG58, RG59, 6, 11 & UHF-58, 8 Cables and BNC, TNC Connectors HEX:.100",.359",.406 RG59, 6, 62 Cables and CATV Connectors HEX:.322",.255" 240/9.4 Blister card 225/9 Blister card 225/9 Blister card

13 CP-316 Adjustable Compression Tool For crimping waterproof connector F, BNC, RCA, IEC, MINI F on RG58,RG59,RG6 coaxial cable. Has body scale to easily adjust plunger from 21 to 46mm. Comes with integrated handle lock for easy storage. Steel body with black oxide finish Crompression tool for connecting waterproof connectors BNC, F, RCA on RG58, RG59 and RG6 coaxial cables. Fast and reliable solution to home theater, CATC,satellite systems and security applications. Comes with 2 in 1 conversion pluger for easy compression of RCA, BNC and F type connectors. Economy Grade Compression Connector Crimping Tool RCA waterproof connectors Handle ABS Body S50C BNC waterproof connectors Hardness of main parts HR15N F waterproof connectors Mini F connectors For crimping connector F, BNC, RCA, IEC, MINI F coaxial cables OAL (mm/ inch) 146/5.7 IEC connectors Blister card Compression Connector Crimping Tool Crimps RG58/59/6/6 Quad F-Compression Connectors. Crimps RG7/8/11 Riser F-Compression Connectors. Fully adjustable to fit common connector sizes. Handle PVC HRC body A3 Steel For crimping, F,RCA,BNC type compression connectors Adaptable head for different connector types OAL. Compression Connector Crimping Tool Universal tool for all F, BNC, and RCA connectors. Works on RG58/59/6/6Q and large RG7/11 Riser Cable Connectors. 142/5.6 Blister card Model No. Handle HRC Carbon steel + ABS PP 40 ±5 RG-58, 59, 6, 8,11 / F Connector 174/6.8 Blister card Aluminum PVC 45 ±3 RG-58, 59, 6, 8,11 / F, BNC, RCA Connectors 170/6.7 Blister card CP-315 Adjustable Compression Tool CP-313 Adjustable Compression Crimping Tool Compression Connector Crimping Tool Set the len gth be fore usin g Model No. Handle HRC CP-315 Carbon steel Nylon 40 ±5 Connecting waterproof connectors F, BNC, RCA on RG-58, RG-59 and RG-6 coaxial cables 120/4.7 Blister card Carbon Steel + ABS PVC 40 ±5 RG-58, 59,6 / F Connector 143/5.6 Blister card CP-313 Carbon steel PVC 40 ±5 RG-58, 59,6 (3C, 4C, 5C), F / BNC / RCA Connectors 152/6.0 Blister card 63 63

14 Compression Connector Crimping Tool For RG-58, RG-59, RG-6 and F connectors IDC Crimp Tool For crimping IDC-type of connectors onto flat cables Before crimping Crimping Distance 6~27.5mm 10mm : ABS 74mm Tab for insert on stand seat Flat cable After crimping 6mm Attachment I. D. C. Connector Handle HRC S45C PVC 45 ±3 RG-58, 59,6 (3C, 4C, 5C), F Connectors 215/8.5 Blister card Handle HRC Low carbon DIE:ABS Hadle:PP PVC 45 ±3 IDC-type connectors Height: 6mm~27.5mm Width(Max): 55mm D-Sub, 2-Stage, Open Barrel Crimper Multi-Purpose Crimper 240/9.4 Blister card Model No. Handle HRC Carbon steel Cushion 45 ±3 For crimping D-Sub AWG.20/24/28 175/6.9 Blister card Carbon steel Cushion 45 ±3 For computer pins & sockets, D-Sub AWG wire, For butt-insulated connectors, AWG wire, For telephone piercing spade lugs, AWG wire, For open barrel connectors, AWG wire, For open barrel connectors, AWG wire, For noninsulated terminals, 10-14,16-18 and AWG wire 185/7.3 Blister card CP-416 Cutter/Stripper & Crimper Insulated and Non-Insulated Wire Ferrules 3 in 1 Features: All in one combination for crimping, stripping and cutting. Made of high quality carbon steel with black oxide finished for anti-rust. PVC cushion grip handle provides user comfort. The stripper is processed by CNC lathe to ensure the accuration Multi-Purpose Crimping Tool wire ferrules crimper Wire cutter Wire stripper Handle HRC Hardness Handle Strip Cutter Crimp DIE: 4140 Frame: S45C PVC DIE:42 ±2 Crimping, Wire Ferrules Frame: 44 ±2 0.25~2.5 mm 2, Stripping wire AWG 26~14 200/8 Blister card S45C HRC: 45 ±3 PVC 10, 12, 14, Bolt cutter: 16, 18, 20, 4-40, 5-40, 22, AWG 6-32, 8-32, 10-32, Insulation & Non-insulation: 10~16, 18~22AWG 210/8.3 Blister card 64 64

15 Wire Ferrule Crimp Tool-Square Crimp DESCRIPTION: Ratcheted, AWG 28-7 wire ferrules APPLICATION: For crimping all wire ferrules insulated and non-insulated (AWG 28-7). Produces square crimp cross section. Made in Germany. PACKAGING: Blister Card CP-462G Wire Ferrule Crimp Tool-Square Crimp Features: Adjustable ratchet and lever action construction reducesfatigue degree. Special four-mandrel crimping style for square crimp. High quality crimping standard ensures repeatable crimping action. Economy Grade Four-mandrel for square crimp Body Handle 58crV4 Steel TPR For crimping all wire ferrules insulated and non-insulated (AWG 28-7) OAL. (inch) 7 Blister card HRC Handle S44C 40 ±2 Nylon Usable for cord end terminals AWG 26 ~ 10,DIN 0.25 ~ 6.0 mm² JIS 0.20 ~ 5.5 mm² OAL Way Indent Crimping Tool CP-463 D-Sub Contact Crimping Tool 175/6.9 Blister card Features Used to crimp closed barrel, screw machine pin and socket style contacts. Performs a simultaneous 4 indent crimp for superior contact retention. HRC Handle S50C 45 ±3 PVC Including wire ferrules 0.5 x 6mm: 40pcs 0.75 x 6mm: 40pcs 1.0 x 6mm: 30pcs 1.5 x 7mm: 20pcs 2.5 x 7mm: 20pcs 4 Way to Crimping Crimping of closed-barrel RS-232 D-sub contacts. AWG 26-20, DIN mm², JIS mm² 162 /6.4 Blister card Precision Crimping Tool With Wire Ferrules Features Ergonomic handle design provides low-effort operation Superior pull strength results High quality crimping standard ensures repetitive, reliable crimping action Adjustable pin height locator For Larger Wire Size HRC Handle SPCC + carbon steel 45 ±3 PVC 4 Way to Crimping Crimping of closed-barrel RS-232 D-sub contacts. AWG / DIN mm² JIS mm² (mm/ inch) 165/6.5 Individua Blister card 4-Way Indent Crimper-Deutsch Ideal for crimping deutsch closed barrel terminals found on motorcycles, trucks and other heavy duty vehicles. Terminal crimper Handle HRC S45C PVC 45 ±3 Non-insulated wire ferrules AWG 23/22/20/18/17/15/13, 0.25/ 0.34/0.5/ 160/6.3 Blister card 0.75/1.0/1.5/2.5mm 2 For use with AWG closed barrel terminals. HRC Cutting Body Handle Body edge OAL S55C PVC 44 ± /6.4 Blister card 65 65

16 CP-412G/CP-413G CP-412G Heavy Duty Wire Strippers/Crimpers CP-413G Wire cutter Wire stripper Bolt cutter Model No. Handle HRC CP-412G S50C PVC 45 ±3 CP-413G S50C PVC 45 ±3 CP-386 Snap Plier Ergonomic and light weight design for less fatigue, save effort up to 65%. Die set contains both male stud & eyelet and female cap & socket snaps. Crimp insulated and non-insulated Terminals Wire strip Bolt cutter Crimp Stranded wire: 12-24AWG 4-40, 8-32, 6-32, 10-32, AWG (Barrel-type inulated and Non- Solid wire: 10-24AWG Insulated terminal) Stranded Wire: 26-24, 22-20, 18, 16, 14, 12, 10 AWG 4-40, 10-32, 10-24, 26-14, AWG (Insulated Terminal) Solid Wire: 22-20, 18, 16, 14, 12, 10, 8 AWG 8-32, AWG (Non-Insulated Terminal) CP-415 OAL. Cutter Stripper and Crimper 206/8.1 Blister card 215/8.5 Blister card Stripper Accessories: Hex wrench and die set Handle Die Perfect for 10mm-13mm snap on all canvas Aluminum covers, tarps, tent, static-dissipative mat and Steel more. OAL. 180/ Insulated Terminal Crimp Kit w Blister card 175/6.9 Blister card Hardness Handle SK7 HRC: 53 ±3 TPR Cutter Strip Cutter Crimp 10~30 AWG (5.5~0.05mm 2 ) Cutter: 12~30 AWG (2.0~0.25 mm) Cutter: 10~30 AWG (5.5~0.05 mm 2 ) Terminal Crimp Kit Crimping Tool AWG: 12-10/16-14/22-18 JIS: /2.0/1.25mm 2 DIN: 6-4/2.5/0.9 mm 2 Crimper Butt splice connector, insulated PVC, copper tubular 30 Pcs, 22-16AWG, Red 20 Pcs, 16-14AWG, Blue 15 Pcs, 12-10AWG, Yellow Ring terminal, insulated PVC, brazed seam 50 Pcs, 22-16AWG, #6 Stud size, Red 40 Pcs, 16-14AWG, #8 Stud size, Blue 20 Pcs, 12-10AWG, #10 Stud size, Yellow Ratcheted Crimper Ring insulated Terminal (22-16 AWG & Stud size: #6 ) X 50 pcs (16-14 AWG & Stud size : #8) X 40 pcs (12-10 AWG & Stud size : #10) X 20 pcs Butt Splice insulated (22-16 AWG) x 30 pcs (16-14 AWG) x 20 pcs (12-10 AWG) x 15 pcs Handle HRC SAE PVC Wire strip AWG: HV 10, 12, 450~800 14, 16, 18, Bolt cutter 4-40, 6-32, 10-24,10-32, 8-32 Crimp Insulation: 16-14, 12-10, Non-insulation: 22-18, 16-14, AWG OAL. 235/9.3 Blister card

17 CP-151B/CP-251B/CP-351B/CP-353 Non-Insulated Terminals Ratchet Crimping Tool New mechanism ratcheting crimper designed for non-insulated terminals, energy saving up to 35%. High leverage handles, compound action mechanism provide superior mechanical advantage. The accurate crimping mold and self locking / releasing mechanical unit design ensure high crimping quality when crimping repeatedly. Made of high quality carbon steel with black oxide finish for anti-rust Ergonomically shaped non-slip TPR handle with eyelet design for user comfort and easy storage. There are 4 different sizes to meet most applications. Ideal for electronics and electrical installation purposes. 35% force saving New Mechanism : AISI 4140 Hardness: HRC 44 ~46 Crimping pressure adjustment : S45C Hardness: HRC 43 ~45 Black oxide finish Ratcheting release trigger Non-slip TPR handles CP-151B CP-251B CP-351B Energy saving ratcheting design CP different sizes to meet most wire size stamped on terminals Electronics and electrical installation purposes Model No. CP-151B CP-251B CP-351B CP-353 HRC Handle Frame:S45C Die: AISI 4140 Frame:S45C Die: AISI 4140 Frame:S45C Die: AISI 4140 Frame:S45C Die: AISI TPR TPR Crimper die profile OAL(mm) Non-insulated spade/ring terminals,awg 22-16/16-14/12/10, JIS 1.25/2.0/3.5/5.5 mm² DIN 1.5/2.5/4.0/6.0 mm² Non-insulated spade/ring terminals,awg 22-16/16-14/12-10/8/6,DIN 1.5/2.5/6.0/10/16 mm² JIS 1.25/2.0/5.5/8.0/14 mm² TPR Non-insulated spade/ring terminals, AWG 8/6/4/2, DIN 10/16/25/35 mm², JIS 8/14/22/38 mm² TPR AWG / 8 / 6 / 4, DIN 4-6 / 10 / 16 / 25 mm², JIS 5.5 / 8.0 /14 / 22 mm² Blister card 67 67

18 Non-Insulated Terminal Crimper Energy saving ratcheting crimper designed for non-insulated spade/ring terminals High leverage handles, compound action mechanism provide superior mechanical advantage. (For Non-Insulated Terminal) HRC Frame:S45C Die:SK-5 39 ±2 For Solderless, Non-Insulated terminals and AWG.22-16/16-14/12-10/8/6 185/7.3 Blister card Heavy Duty Crimping Tool The best crimping solution for heavy duty tinned terminals Adjustable crimp nests with clearly marked gauges Lightweight and easy for operation Rugged cast steel construction for durability For terminating insulated and non-insulated cable lugs from AWG 8 to 250MCM copper and AWG 8 to 4/0 Aluminum HRC Body: FCD45 Die: SK5 40 ±2 AWG 8, 6, 4, 2, 1/0, 2/0, 3/0, 4/0,DIN 10, 16, 25, 35, 50, 70, 95, 120mm 2 570/22.4,JIS 8, 14, 22, 38,60 70, 80, 100 mm 2 Inner box+ color label 68 68

19 Hydraulic Crimpers QuikCrimp 6 Ton Capacity-not to be used with 12 ton-dies. Description: Battery Powered Hex Crimping Tool with die sets. : Micro computer control system-automatically detects pressure when crimping, with double safety protection. Pressure released automatic Function-tool. The tool is equipped with a double piston which is characterized by a fast approach towards the connector material, then a transfer to high pressure automatically by slower crimping. Crimping head can be smoothly turned by 350 around the longitudinal axis in order to gain better access to tight corners and other difficult working areas. Accepts industry standard 6 Ton dies. Packaging: Blow-molded case. Comes W/2 Batteries HYDRAULIC PUNCHES Replacements (included in kit): DIE-AWG DIE-AWG DIE-AWG DIE-AWG DIE-AWG DIE-AWG DIE-AWG DIE-300MCM DIE-350MCM DIE-500MCM DIE-600MCM BATTERY CHARGER Replacement Die - AWG6 Replacement Die - AWG4 Replacement Die - AWG2 Replacement Die - AWG1/0 Replacement Die - AWG2/0 Replacement Die - AWG3/0 Replacement Die - AWG4/0 Replacement Die - 300MCM Replacement Die - 350MCM Replacement Die - 500MCM Replacement Die - 600MCM Replacement Battery Replacement Battery Charger TuffCrimp 400 Description: Hydraulic Crimping Tool - 12 Ton with interchangeable die. : Type C head with Interchangeable dies. Crimping head can rotate 360 Built-in safety valve will by-pass the oil supply when maximum pressure is reached. Automatic pressure release. Manual retract after crimping. Accepts industry standard 6 and 12 ton dies. ReplacementS (INCLUDED IN KIT): DIE-AWG DIE-AWG DIE-AWG DIE-AWG DIE-AWG DIE-AWG DIE-AWG DIE-300MCM DIE-350MCM DIE-500MCM DIE-600MCM DIE-800MCM Replacement Die - AWG6 Replacement Die - AWG4 Replacement Die - AWG2 Replacement Die - AWG1/0 Replacement Die - AWG2/0 Replacement Die - AWG3/0 Replacement Die - AWG4/0 Replacement Die - 300MCM Replacement Die - 350MCM Replacement Die - 500MCM Replacement Die - 600MCM Replacement Die - 800MCM TuffCrimp