Floor Kettles model AHS
|
|
- Noah Gardner
- 5 years ago
- Views:
Transcription
1 Stainless Steel Steam Jacketed Kettle Floor Kettles model AHS Description Kettle shall be a Groen Model AHS (40 gallon) stainless steel, self-contained, steam jacketed kettle operating from gas heated steam source contained within the unit. Construction Kettle interior shall be of type 316 stainless steel, with solid one-piece construction. All exposed surfaces shall be stainless steel. All controls shall be contained within front control enclosure. Kettle body is sheathed in stainless steel and insulated with fiber bat insulation. Unit provided with three adjustable legs for leveling. Faucet mounting bracket is standard. Finish Interior of kettle shall be polished to a 180 emery grit finish. Exterior shall be finished to a uniform #3 finish ensuring maximum ease in cleaning and maintaining appearance. ASME Code, CSA (Formerly AGA) Design Certified, CRN Registered Unit shall be ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 30 PSI. Unit shall be Design Certified by the Canadian Standard Association. Unit shall be registered in Canada with a CRN number. Sanitation Unit shall be designed and manufactured to meet NSF requirements and be NSF listed. Drawoff Valve Unit shall have a 2 sanitary tangent drawoff which is made of 316 stainless steel. Valve has durable insulated handle, Dupont Viton compression sealing disk and is easy to disassemble without tools. The drain outlet shall be equipped with a removable 1/4 perforated stainless steel strainer. Cover Cover shall be furnished with No. 51 counterbalanced actuator designed to maintain the cover in an open or closed position. Controls All controls shall be contained in a stainless steel enclosure. Controls include a regulating thermostat, pressure gauge, power-on switch, power-on indicator light, heat indicator light, low water indicator light, water sight gauge, pressure safety valve, pressure limit control, low water cut off, a gas regulator valve and electronic ignition module; with all operating controls front mounted. Model AHS shown Performance/Features Unit shall be thermostatically controlled to automatically shut off when desired temperature is reached and turn on when product temperature drops below desired setting. Electronic ignition to standing pilot is standard on all models. Outer sheathing and fiber insulation retain heat and keep kettle exterior cool to the touch. Self-Contained Steam Source Kettle shall have a gas-heated, self-contained steam source to provide kettle temperatures of 150 to approximately 250 F. Unit shall be factory charged with water and rust inhibitor to ensure long life and minimum maintenance. Installation Specify natural or propane. Unit requires 1/2 NPT gas line connection and 115 volt electric supply to operate controls. No remote steam source required. Options/Accessories Basket inserts (TRI-BC) Water fill faucets 1/8 perforated strainer 1/4 perforated strainer Solid disk strainer Kettle brush kit Contour measuring strip Gallon etch marks Origin of Manufacture Kettle shall be designed and manufactured in the United States. ow Height Floor Mounted Stationary Self-Contained Gas Heated 40-Gallon Capacity Short Form Groen Model AHS (40 gallon), self contained Natural/ Propane (specify) gas heated stainless steel steam jacketed kettle, complete with 2 sanitary tangent draw-off valve, and No. 51 spring assisted cover. Steam jacket is insulated and ASME code constructed for maximum working pressure of 30 PSI. Unit is thermostatically controlled, with electronic ignition as standard. CSA design certified and NSF listed. Requires 1/2 gas supply and 115 Volt electric service. Made in the USA. Applications Meat Dishes Vegetables Soups Sauces Pasta Rice Pie Fillings Gravies Poultry Seafood 1055 Mendell Davis Drive, Jackson, MS , unifiedbrands.net Please reference our website for the most updated product information and specifications. Groen Floor Kettles, Page D Revised 07/10
2 CER TABE OF DIMENSIONS 40 GA. 150 MM INCH / / / / / / / Model AHS REV. A P/N REV A TOP VIEW FRONT VIEW DRAFT DIVERTER EFT SIDE RIGHT SIDE REAR RIGHT SIDE VIEW INSTAATION CEARANCES MINIMUM DISTANCE FROM RECOMMENDED COMBUSTIBE WAS DISTANCE 2' 2" 2" 8" FOR SERVICING 4" 4" GAS OPERATING PRESSURE INCOMMING RECOMMENDED PRESSURE NATURA GAS PROPANE GAS 3.5" W.C. SERVICE CONNECTIONS AND NOTES: 1. EECTRICA CONNECTION: 115V, 1 PH, 60 HZ, 2 AMPS 2. GAS CONNECTION: 1/2 NPT. 3. DIMENSIONS IN BRACKETS ( ) ARE MM. 5" W.C. MIN. DIM. A B C D E F G H J K M N P R 10" W.C. 12" W.C. MIN. 'N' DIA. FUE OUTET 14" W.C. MAX. 14" W.C. MAX. FIRING RATE 115, ,000 CAP. R E H RIM HEIGHT 2" MIN. SIDE CEARANCE G REAR CEARANCE 4-3/4 (102) F 4" (102) ASME APPROVED SAFETY VAVE 30 PSI C DIA. 4" (102) 2" MIN. SIDE CEARANCE 6-3/4 (171) 30 KETTE EG POSITION D COVER OPEN SEE NOTES 4 & 5 (NOT SHOWN IN OTHER VIEWS) FAUCET BRACKET 2" TANGENT DRAWOFF K J ADJUSTABE BUET FEET EECTRICA CONNECTION: 7/8" DIA. B O.D. 18" (457) FUE HEIGHT A I.D. M W/COVER OPEN P 9-1/2 7-1/2 GAS CONNECTION: 1/2" NPT SCAE:.04 =1 DO NOT SCAE DRAWING 1055 Mendell Davis Drive, Jackson, MS 39272, , unifiedbrands.net 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
3 Stainless Steel 2/3 Steam Jacketed Kettle Floor Kettles model DHS Description Kettle shall be a Groen Model DHS (40 gallon) stainless steel steam jacketed unit, operating with a self-contained gas heated steam source contained within the unit. Construction Kettle interior shall be of 316 stainless steel with solid one-piece welded construction. The console and all exposed surfaces shall be stainless steel. All controls shall be mounted on the front panel except the thermostat, which is mounted on the trunnion support arm. The kettle body shall be mounted to a heavy-duty stainless steel tilt trunnion. The trunnion assembly is supported by the stainless steel enclosed base. The base shall be provided with stainless steel tubular legs with adjustable bullet feet. The enclosed support base shall contain a smooth operating, self locking tilt mechanism, and shall be of sanitary, drip-proof construction, with interior readily accessible for installation or maintenance. The unit shall be furnished with a heavy reinforced bar rim with a welded-in butterfly shaped pouring lip for maximum sanitation and durability. Faucet mounting bracket is standard. Finish Kettle interior shall be polished to a 180 emery grit finish. Exterior of kettle shall be finished to a bright high buff finish, ensuring maximum ease in cleaning and maintaining brilliant appearance. ASME Code, CSA (Formerly AGA) Design Certified, CRN Registered Unit shall be ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 50 PSI. Unit shall be design certified by the Canadian Standard Association. (Natural and Propane only.) Unit shall be registered in Canada with a CRN number. Sanitation Unit shall be designed and constructed to meet NSF requirements and be NSF listed. Drawoff A 2 sanitary tangent drawoff is optional. (Add T to model designation DHS/T). If drawoff is specified, outlet shall be equipped with removable 1/4 perforated stainless steel strainer. Self-contained Steam Source Kettle shall have a gas-heated (natural or propane) selfcontained steam source to provide kettle temperatures of 150 to approximately 295 F. Unit shall be factory charged with water and rust inhibitor to ensure long life and minimum maintenance. Controls Controls shall include a regulating thermostat, pressure gauge, safety tilt cut-off, safety valve, pressure limit control, water sight glass, low water cut off, a gas regulator valve and electronic ignition module. Power ON switch, Power ON indicator light, OW WATER indicator light, and Model DHS shown heat indicator light are mounted on the kettle support side console. Gas supply shall shut off automatically when unit is tilted. Performance Features Patented fin tube burner assembly delivers 77-80% combustion efficiency; 40 Gallon Model has 150,000 BTU/HR firing rate with 115,500 BTU/HR into the product Electronic ignition to standing pilot is standard on all models. Unit shall be thermostatically controlled to automatically shut off when desired temperature is reached and turn on when product temperature drops below desired setting. Installation Specify natural or propane. Unit requires 1/2 NPT gas line connection and 115 volt electrical connection. No remote steam source required. Options/Accessories Water fill faucets 2 tangent draw-off (TDO) valve with 1/4 perforated strainer Kettle brush kit ift off cover Counterbalanced hinged cover 1/4 perforated strainer 1/8 perforated strainer Solid disk strainer Contour measuring strip Gallon etch marks ip strainers Pan carrier (40 and 60-gallon) Origin of Manufacture Kettle shall be designed and manufactured in the United States. ow Height Floor Mounted Tilting Self-Contained Gas Heated 40-Gallon Capacity Short Form Groen Model DHS (40 gallon), self-contained, gas heated (specify natural or propane) tilting, steam jacketed kettle. All stainless steel construction with reinforced bar rim, butterfly shaped pouring lip and smooth action mechanical tilt. Patented fin tube burner assembly is 77-80% combustion efficiency, with electronic ignition standard. NSF listed, ASME code constructed for 50 PSI and CSA. design certified (Natural & Propane gas only). Requires 1/2 NPT gas line and 115 volt electric service. Made in USA. Applications Meat Dishes Vegetables Soups Sauces Pasta Rice Pie Fillings Gravies Poultry Seafood 1055 Mendell Davis Drive, Jackson, MS , unifiedbrands.net Please reference our website for the most updated product information and specifications. Groen Floor Kettles, Page D Revised 07/10
4 R HEAT ON CER TO STOP 1. SET THERMOSTAT TO "OFF". 2. SET POWER SWITCH TO "OFF". OFF Model DHS P/N REV B WA OW WATER BEFORE OPERATION 1. READ AND UNDERSTAND OPERATORS MANUA. 2. CHECK FOR WATER IN KETTE. EVE MUST BE ABOVE "MINIMUM". 3. CHECK FOR VACUUM IN KETTE. PRESSURE GAUGE SHOUD READ BETWEEN 20" Hg to 30" Hg WHEN KETTE IS COD. 4. IF REQUIRED, ESTABISH VACUUM. a. HEAT KETTE UNTI PRESSURE GAUGE SHOWS 5 PSI. b. IFT SAFETY VAVE EVER TO VENT KETTE. *** WARNING *** ESCAPING STEAM CAN CAUSE SEVERE BURNS!! c. AOW EVER TO SNAP COSED. TO START 1. SET POWER SWITCH TO "OFF". 2. SET THERMOSTAT TO "OFF". 3. OPEN GAS SUPPY VAVE. 4. SET POWER SWITCH TO "ON", 5. ROTATE THERMOSTAT UNTI HEAT IGHT IS ON. 1-2 OW HEAT (SIMMER), 8-9 HIGH HEAT (BOI) 6. HEAT IGHT IS ON WHEN MAIN BURNER IS ON. POWER CEARANCE FOR TITING R 2" (51) N E 6" MIN. (152) EFT SIDE CEARANCE WA F 2" (51) TYP. 1-13/16" (46) TYP. P 4-5/8" (117) ID A 6-1/2 (165) C (156) 6-1/8" 12-5/8" (321) D (114) 4-1/2" 29" (737) GAS INET 1/2" NPT OPTIONA FAUCET EFT SIDE RIGHT SIDE NOTES : 1. OPTIONA EXTRA COST FEATURES: A. 2" TANGENT SANITARY DRAW-OFF B. FAUCET WITH SWING SPOUT C. MODE #31 IFT OFF COVER. 2. DIMENSIONS IN BRACKETS ( ) ARE MM. 3. EECTRICA SUPPY: AMPS. 4. CUSTOMER TO SUPPY WATER RESISTANT CONDUIT FITTING FOR EECTRICA SUPPY. INSTAATION CEARANCES MINIMUM DISTANCE FROM RECOMMENDED COMBUSTIBE WAS DISTANCE 6" 6" 6" 10" FOR SERVICING REAR 10" 10" GAS OPERATING PRESSURE RECOMMENDED INCOMMING PRESSURE FIRING RATE NATURA GAS 3.5" W.C. 4.5" W.C. MIN. 14" W.C. MAX. 150,000 PROPANE GAS 11" W.C. 12" W.C. MIN. 14" W.C. MAX. 150,000 TABE OF DIMENSIONS CAPACITY (GAONS/ITRES) 40 GA/152 ITRES INCHES MM A B C 30 7/8 784 D 34 1/2 876 E F G 40 5/ H J K 27 1/ /2 826 M 60 1/ N 39 1/ P 7 1/2 191 KETTE TIT HANDE FAUCET BRACKET FURNISHED AS STANDARD G OPTIONA 2" (51) TANGENT DRAWOFF 10" (254) MIN. REAR H 1/2" NPT GAS INET ADJUSTABE FEET 4-1/2" (114) (57) 2-1/4" C OF EECTRICA KETTE IN FU TIT POSITION J 18 EECTRICA CONNECTION 1/2" WATERTIGHT CONDUIT CONNECTOR PROVIDED (BACK SIDE) (SEE NOTE 4) B 6" (152) 6" MIN. (152) 7-1/2" MAX. (191) M POUR PATH MAX. K POUR PATH MIN. 5-1/2" (140) SCAE:.05"=1" DO NOT SCAE DRAWING C OF FRONT VIEW EECTRICA RIGHT SIDE VIEW P/N REV B 1055 Mendell Davis Drive, Jackson, MS 39272, , unifiedbrands.net 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
5 Stainless Steel 2/3 Steam Jacketed Kettle Floor Kettles model DEES Description Kettle shall be a Groen Model DEES (40 gallon) stainless steel steam jacketed unit, operating with an electric heated steam source contained within unit. Construction Kettle interior shall be of type 316 stainless steel, with solid one-piece welded construction. The console and all exposed surfaces shall be stainless steel. The kettle body shall be mounted in a heavy-duty stainless steel tilt trunnion. The trunnion assembly is supported by the stainless steel enclosed base. The base shall be provided with stainless steel tubular legs with adjustable bullet feet. The enclosed support base shall contain a smooth operating, self-locking tilt mechanism, and shall be of sanitary, drip-proof construction with interior readily accessible for installation or maintenance. The unit shall be furnished with a heavy reinforced bar rim with a welded-in butterfly shaped pouring lip for pouring control and durability. Faucet mounting bracket is standard. All electrical components to be contained within the kettle and console. Designed for single point electrical connection. Finish Kettle interior shall be polished to a 180 emery grit finish. Exterior of kettle shall be finished to a bright high buff finish, ensuring maximum ease in cleaning and maintaining brilliant appearance. ASME Code, U isted, CRN Registered Unit shall be ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 50 PSI. Unit shall be U listed for sale in USA and Canada. Unit shall be registered in Canada with a CRN number. Sanitation Unit shall be designed and constructed to meet NSF requirements and be NSF listed. Drawoff A 2 sanitary tangent drawoff is optional. (Add T to model designation - DEES/T). If drawoff is specified, outlet shall be equipped with removable 1/4 perforated stainless steel strainer. Self-Contained Steam Source Kettle shall have an electrically heated self-contained steam source to provide kettle temperatures of 150 F to approximately 295 F. Unit shall be factory charged with water and rust inhibitor to ensure long life and minimum maintenance. Controls Controls shall include a regulating thermostat, built-in contactor, safety tilt cut-off, safety valve, pressure limit control, pressure gauge, water sight glass, heat indicator light and low water cutoff. Performance Features Model DEES shown Unit shall be thermostatically controlled to automatically shut off when the desired temperature setting is reached and turn on when product temperature drops below desired setting. Smooth action manual tilt allows for easy pouring and transfer of kettle contents. Installation Specify 208, 240, or 480 Volt, single or three phase, for 60 cycle electric service. Options/Accessories Water fill faucets ift-off cover Counterbalanced, spring assist hinged cover kit Solid disk strainer 1/4 perforated strainer 2 tangent draw-off (TDO) valve with 1/4 perforated strainer Kettle brush kit 1/8 perforated strainer Contour measuring strip Gallon etch marks ip strainer Pan carrier Single Phase Terminal Block Kit Origin of Manufacture Kettle shall be designed and manufactured in the United States. ow Height Floor Mounted Tilting Self-Contained Electric Heated 40-Gallon Capacity Short Form Groen Model DEES (40 gallon), self-contained, tilting, electric heated, stainless steel steam jacketed kettle. All stainless steel construction with reinforced bar rim, butterfly shaped pouring lip and smooth action mechanical tilt. Kettle body shall be mounted in heavy duty stainless steel combination kettle support tilt trunnion, which is supported by stainless steel enclosed base. NSF listed, ASME code constructed for 50 PSI and U listed. Specify 208, 240, or 480 Volt, single or three phase for 60 cycle. Made in USA. Applications Meat Dishes Vegetables Soups Sauces Pasta Rice Pie Fillings Gravies Poultry Seafood 1055 Mendell Davis Drive, Jackson, MS , unifiedbrands.net Please reference our website for the most updated product information and specifications. Groen Floor Kettles, Page E Revised 07/11
6 Model DEES P/N REV B 1055 Mendell Davis Drive, Jackson, MS 39272, , unifiedbrands.net 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
7 Stainless Steel Steam Jacketed Kettle Floor Kettles model AH/1 Description Kettle shall be a Groen Model AH/1 (specify 20, 40, 60, 80 or 100 gallons) stainless steel, self-contained, steam jacketed kettle operating from gas heated steam source contained within unit. Construction Kettle interior shall be of type 316 stainless steel, with solid one-piece construction. All exposed surfaces shall be stainless steel. All controls shall be contained within front control enclosure. Kettle body is sheathed in stainless steel and insulated with fiber bat insulation. Unit provided with three adjustable legs for leveling. Faucet mounting bracket is standard. Finish Interior of kettle shall be polished to a 180 emery grit finish. Exterior shall be finished to a uniform #3 satin finish ensuring maximum ease in cleaning and maintaining appearance. ASME. Code, CSA (Formerly AGA) Design Certified, CRN Registered Unit shall be ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 30 PSI. Unit shall be Design Certified by the Canadian Standard Association. Unit shall be registered in Canada with a CRN number. Sanitation Unit shall be designed and manufactured to meet NSF requirements and be NSF listed. Drawoff Valve Unit shall have a 2 sanitary tangent drawoff which is made of 316 stainless steel. Valve has durable insulated handle, rubber compression sealing disk and is easy to disassemble without tools. The drain outlet shall be equipped with a removable 1/4 perforated stainless steel strainer. Cover Cover furnished on 20 gallon units shall be hinged, dome one-piece unit. Units of 40 to 100 gallon capacity shall be furnished with No. 51 counterbalanced actuator designed to maintain the cover in an open or closed position. Controls All controls shall be contained in a stainless steel enclosure. Controls include a regulating thermostat, pressure gauge, power-on switch, power-on indicator light, heat indicator light, low water indicator light, water sight gauge, pressure safety valve, pressure limit control, low water cut off, a gas regulator valve and electronic ignition module; with all operating controls front mounted. Performance/Features Unit shall be thermostatically controlled to automatically shut off when desired temperature is reached and turn on when product temperature drops below desired setting. Electronic ignition to standing pilot is standard on all models. Outer sheathing and fiber insulation retain heat and keep kettle exterior cool to the touch. Model AH/1 shown Self-Contained Steam Source Kettle shall have a gas-heated, self-contained steam source to provide kettle temperatures of 150 to 270 F. Unit shall be factory charged with water and rust inhibitor to ensure long life and minimum maintenance. Installation Unit requires 1/2 NPT gas line connection and 115 volt electric supply to operate controls. No remote steam source required. Options/Accessories Basket inserts (TRI-BC) Water fill faucets 3 tangent draw-off valve with 1/8 perforated disk strainer Solid disk strainer Other supply voltages Kettle brush kit Contour measuring strip Gallon etch marks Origin of manufacture Kettle shall be designed and manufactured in the United States. Floor Mounted Stationary Self-Contained Gas Heated 20, 40, 60, 80 or 100- Gallon Capacity Short Form Groen Model AH/1 (Specify gallons), self contained Natural/Propane (specify) gas heated stainless steel steam jacketed kettle, complete with 2 tangent draw-off valve, (3 optional) and No. 41 cover. 40 to 100 gallon units furnished with No. 51 spring assisted cover. Steam jacket is insulated and ASME code constructed for maximum working pressure of 30 PSI. Unit is thermostatically controlled, with electronic ignition standard. CAS design certified and NSF listed. Requires 1/2 gas supply and 115 Volt electric service. Made in the USA. Applications Meat Dishes Vegetables Soups Sauces Pasta Rice Pie Fillings Gravies Poultry Seafood 1055 Mendell Davis Drive, Jackson, MS , unifiedbrands.net Please reference our website for the most updated product information and specifications. Groen Floor Kettles, Page D Revised 07/10
8 CER Model AH/1 KETTE EG POSITION DRAWOFF 2" TANGENT R DOOR ADJUSTABE BUET FEET DRAFT DIVERTER 'N' DIA. FUE OUTET RIM H HEIGHT G PIOT ACCESS J TABE OF DIMENSIONS 20 GA. 40 GA. 60 GA. 80 GA. 100 GA INCH MM INCH MM INCH MM INCH MM INCH MM / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / FAUCET BRACKET K D CAP. E GAS SUPPY SPECIFICATIONS AH/1-20 AH/1-40 AH/1-60 AH/1-80 AH/1-100 (121) 4 3/4 DIM. 145, , ,000 A 6" (152) C DIA. ASME APPROVED SAFETY VAVE 30 PSI 30 4"(102) 6" (152) MIN. SIDE CEARANCE 145, /4 (171) COVER OPEN SEE NOTES 4 & 5 B (NOT SHOWN IN OTHER VIEWS) O.D. A I.D. M W/ COVER OPEN P R REAR CEARANCE 145, , ,000 85,000 85,000 85,000 MODE NATURA GAS BTU/HR PROPANE GAS BTU/HR B C D RECOMMENDED INCOMING GAS FEED RATE INCHES WATER COUMN 4.5" W.C. MIN. NATURA GAS 14" W.C. MAX. E F G 11" W.C. MIN. 14" W.C. MAX. PROPANE GAS H / / J /4 8 1/2 97 1/2 24 1/ / / /2 K 8 1/ / /4 6" (152) MIN. SIDE CEARANCE 91 1/ / / M N 35 1/ / / / /2 P /2 622 R 17 1/ / /2 S SERVICE CONNECTIONS AND NOTES: 1. EECTRICA CONNECTION: 115V, 1 PH, 60 HZ, 2 AMPS 2. GAS CONNECTION: 1/2 NPT. 3. MINIMUM CEARANCE REQUIRED. 4. MODE #41 HINGED COVER IS STD. ON 20 GA. SIZE. 5. MODE #51 POWER AID COVER (SHOWN) STD. ON 40, 60, 80 & 100 GA. SIZES. 6. SINGE OR DOUBE PANTRY FAUCETS ARE OPTIONA. 7. 3" TANGENT DRAWOFF IS OPTIONA. 8. DIMENSIONS IN BRACKETS ( ) ARE MM. SCAE:.04 =1 DO NOT SCAE DRAWING S P/N REV. B C GAS CONNECTION BURNER ASSEMBY (NOT SHOWN IN OTHER VIEWS) C EECTRICA CONNECTION P/N REV C OPTIONA 3" RIGHT SIDE VIEW TANGENT DRAWOFF F TOP VIEW FRONT VIEW 1055 Mendell Davis Drive, Jackson, MS 39272, , unifiedbrands.net 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
9 Floor Kettles model DEE/4 Description Kettle shall be a Groen Model DEE/4 (Specify 20, 40, or 60 gallon) stainless steel steam jacketed unit, operating with an electric heated steam source contained within unit. Construction Kettle interior shall be of type 316 stainless steel with solid one-piece welded construction. The console and all exposed surfaces shall be stainless steel. The kettle body shall be mounted in a heavy-duty stainless steel combination kettle support tilt trunnion, which in turn is supported by the polished stainless steel enclosed base. The base shall be provided with stainless steel tubular legs with adjustable bullet feet. The enclosed support base shall contain a smooth operating, self-locking tilt mechanism, and shall be of sanitary, drip-proof construction with interior readily accessible for installation or maintenance. The unit shall be furnished with a heavy reinforced bar rim with a welded-in butterfly shaped pouring lip for pouring control and durability. All electrical components to be contained within the kettle and console. Designed for single point electrical connection. Finish Kettle interior shall be polished to a 180 emery grit finish. Exterior of kettle shall be finished to a bright high buff finish, ensuring maximum ease in cleaning and maintaining brilliant appearance. ASME Code, U isted Unit shall be ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 50 PSI. Unit shall be U listed for sale in USA and Canada. Unit shall be registered in Canada with a CRN number. Sanitation Unit shall be designed and constructed to meet NSF and known health department and sanitation codes, and be NSF listed. Drawoff A 2 tangent drawoff is optional. (Add T to model designation - DEE/4T). If drawoff is specified, outlet shall be equipped with removable 1/4 perforated stainless steel strainer. Self-Contained Steam Source Kettle shall have an electrically heated self-contained steam source to provide kettle temperatures of 150 F to approximately 295 F. Unit shall be factory charged with chemically pure water and rust inhibitors to ensure long life and minimum maintenance. Controls Controls shall include a thermostat, built-in contactor, safety tilt cut-off, safety valve, pressure gauge, water sight glass, heat indicator light and low water cutoff. Model DEE/4T shown with optional 2 tangent draw-off Performance Features Unit shall be thermostatically controlled to automatically shut off when the desired temperature setting is reached and turn on when product temperature drops below setting. Smooth action manual tilt allows for easy pouring and transfer of kettle contents. Installation Specify 208, 240, or 480 Volt, single or three phase, 50 or 60 cycle electric service. Options/Accessories 2 tangent draw-off valve with Basket inserts (TRI-BC) ift-off cover Hinged cover kit Pan carrier (40 and 60-gallon) Kettle brush kit Double and single pantry faucets ip strainers 1/8 perforated disk strainer Solid disk strainer Contour measuring strips Gallon etch marks Single Phase Terminal Block Kit Origin of Manufacture Kettle shall be designed and manufactured in the United States. Stainless Steel 2/3 Steam Jacketed Kettle Floor Mounted Tilting Self-Contained Electric Heated 20, 40, or 60- Gallon Capacity Short Form Groen Model DEE/4 (Specify gallons), self-contained, tilting, electric heated, stainless steel steam jacketed kettle. All stainless steel construction with reinforced bar rim, butterfly shaped pouring lip and smooth action mechanical tilt. Kettle body shall be mounted in heavy duty stainless steel combination kettle support tilt trunnion, which is supported by stainless steel enclosed base. NSF listed, ASME code constructed for 50 PSI and U listed. Specify 208, 240, or 480 Volt, single or three phase 50 or 60 cycle. Made in U.S.A. Applications Meat Dishes Vegetables Soups Sauces Pasta Rice Pie Fillings Gravies Poultry Seafood 1055 Mendell Davis Drive, Jackson, MS , unifiedbrands.net Please reference our website for the most updated product information and specifications. Groen Floor Kettles, Page F Revised 07/11
10 Model DEE/4 P/N REV C 1055 Mendell Davis Drive, Jackson, MS 39272, , unifiedbrands.net 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
11 Stainless Steel 2/3 Steam Jacketed Kettle Floor Kettles model DH Description Kettle shall be a Groen Model DH (specify 20, 40, or 60) gallon stainless steel steam jacketed unit, operating with a self-contained gas heated steam source contained within the unit. Construction Kettle interior shall be of type 316 stainless steel, solid one-piece welded construction. The console and all exposed surfaces shall be stainless steel. All controls shall be mounted on the front panel except the thermostat, which is mounted on the trunnion support arm. The kettle body shall be mounted in a heavy-duty stainless steel combination kettle support tilt trunnion, which in turn, is supported by the stainless steel enclosed base. The base shall be provided with stainless steel tubular legs with adjustable bullet feet. The enclosed support base shall contain a smooth operating, self locking tilt mechanism, and shall be of sanitary, dripproof construction, with interior readily accessible for installation or maintenance. The unit shall be furnished with a heavy reinforced bar rim with a welded in butterfly shaped pouring lip for maximum sanitation and durability. Faucet mounting bracket is standard. Finish Kettle interior shall be polished to a 180 emery grit finish. Exterior of kettle shall be finished to a bright high buff finish, ensuring maximum ease in cleaning and maintaining brilliant appearance. A.S.M.E. Code, A.G.A. Design Certified Unit shall be A.S.M.E. shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 50 PSI. Unit shall be design certified by the American Gas Association. (Natural and Propane only.) Sanitation Unit shall be designed and constructed to meet NSF and known health department and sanitation codes. and be NSF listed. Drawoff A 2 tangent drawoff is optional. (Add T to model designation DHT). If drawoff is specified, outlet shall be equipped with removable 1/4 perforated stainless steel strainer. Self-contained Steam Source Kettle shall have a gas-heated (natural, butane, propane) self-contained steam source to provide kettle temperatures of 150 to approximately 295 F. Unit shall be factory charged with chemically-pure water and rust inhibitors to ensure long life and minimum maintenance. Controls Controls shall include a thermostat, pressure gauge, safety valve, pressure limit control, water sight glass, low water cut off, a gas regulator valve and electronic ignition module. Power ON switch, Power ON indicator light, OW WATER indicator light, and HEATING light are mounted on Model DH-40 shown with optional No. 51 cover the kettle support side console. Gas supply shall shut off automatically when unit is tilted. Performance Features Patented fin tube burner assembly delivers 62-65% efficient combustion, depending on size, 20 Gallon Model has 72,000 BTU/HR firing rate with 44,140 BTU/HR into the product; 40 Gallon Model has 100,000 BTU/HR firing rate with 65,000 BTU/HR into the product, and 60 Gallon Model has 150,000 BTU/HR firing rate with 93,000 BTU/HR into the product. Electronic ignition to standing pilot is standard on all models. Unit shall be thermostatically controlled to automatically shut off when desired temperature is reached and turn on when product temperature drops below setting. Installation Specify natural, propane, butane, or specific propane/ butane mixture. Unit requires 1/2 IPS gas line connection and 115 volt electrical connection. No remote steam source required. Options/Accessories 2 tangent draw-off valve with Basket inserts (TRI-BC) ift-off cover Hinged cover kit Pan carrier (40 and 60-gallon) Kettle brush kit Double and single pantry faucets ip strainers 1/8 perforated disk strainer Solid disk strainer Contour measuring strips Gallon etch marks Origin of Manufacture Kettle shall be designed and manufactured in the United States. Floor Mounted Tilting Self-Contained Gas Heated 20, 40 or 60- Gallon Capacity Short Form Groen Model DH (specify gallons), self-contained, gas heated (specify natural, propane, butane, or mixture) tilting, steam jacketed kettle. All stainless steel construction with reinforced bar rim, butterfly shaped pouring lip and smooth action mechanical tilt. Patented fin tube burner assembly is 62-65% efficient, with electronic ignition standard. NSF listed, A.S.M.E. code constructed for 50 PSI and A.G.A. design certified (Natural & Propane gas only). Requires 1/2 IPS gas line and 115 volt electric service. Made in USA. Applications Meat Dishes Vegetables Soups Sauces Pasta Rice Pie Fillings Gravies Poultry Seafood 1055 Mendell Davis Drive, Jackson, MS , unifiedbrands.net Please reference our website for the most updated product information and specifications. Groen Floor Kettles, Page D Revised 07/10
12 Model DH P/N REV A N 2" (51) E (46) 1-13/16" TYP. P 6" MIN. (152) EFT SIDE CEARANCE WA F 2" (51) TYP. 4-5/8" (117) A ID TOP VIEW 6-1/2" (165) C 12-5/8" (321) 6-1/8" (156) D 3-1/2" (89) 29" (737) GAS INET 1/2" NPT OPTIONA FAUCET FIRING RATE (BTU/HR) FOR BOTH NATURA AND P DH/20 72,000 DH/ ,000 DH/60 150,000 OPERATING GAS PRESSURE NATURA 3.5 W.C. PROPANE 10.0 W.C. NOTES : OPTIONA EXTRA COST FEATURES : 1. 2" TANGENT SANITARY DRAW-OFF 2. IFT OFF COVER MODE # 31 FOR DH-20 & DH/1-40 KETTES. 3. HINGED COVER MODE # 51 FOR DH/1-40 & DH-60 KETTES. 4. FAUCET WITH SWING SPOUT 5. DIMENSIONS IN BRACKETS ( ) ARE MM A B C D E F G H J K M N P OPTIONA COVER # 51 SHOWN FAUCET BRACKET FURNISHED AS STANDARD KETTE TIT HANDE OW WATER BEFORE OPERATION 1. READ AND UNDERSTAND OPERATORS MANUA. 2. CHECK FOR WATER IN KETTE. EVE MUST BE ABOVE "MINIMUM". 3. CHECK FOR VACUUM IN KETTE. PRESSURE GAUGE SHOUD READ BETWEEN 20" Hg to 30" Hg WHEN KETTE IS COD. 4. IF REQUIRED, ESTABISH VACUUM. a. HEAT KETTE UNTI PRESSURE GAUGE SHOWS 5 PSI. b. IFT SAFETY VAVE EVER TO VENT KETTE. *** WARNING *** ESCAPING STEAM CAN CAUSE SEVERE BURNS!! c. AOW EVER TO SNAP COSED. TO START 1. SET POWER SWITCH TO "OFF". 2. SET THERMOSTAT TO "OFF". 3. OPEN GAS SUPPY VAVE. 4. SET POWER SWITCH TO "ON", 5. ROTATE THERMOSTAT UNTI HEAT IGHT IS ON. 1-2 OW HEAT (SIMMER), 8-9 HIGH HEAT (BOI) 6. HEAT IGHT IS ON WHEN MAIN BURNER IS ON. TO STOP 1. SET THERMOSTAT TO "OFF". 2. SET POWER SWITCH TO "OFF". POWER G OPTIONA 2" (51) TANGENT DRAWOFF H 2-3/16" (56) ADJUSTABE FEET 6" (152) KETTE IN FU TIT POSITION J EECTRICA CONNECTION 7/8" DIA. HOE 115/1/60, 5 AMPS B 6" (152) 6" MIN. (152) 7-1/2" MAX. (191) M POUR PATH MAX. K POUR PATH MIN. FRONT VIEW RIGHT SIDE VIEW TABE OF DIMENSIONS CAPACITY (GAONS/ITRES) 20 GA/76 ITRES 40 GA/152 ITRES INCHES MM INCHES MM INCHES 19 7/ / / 4 8 1/ 7/ / / / / / / / / / / / 5/ / / / / / / / / / / 2 60 GA/228 ITRES 8 MM INCOMING GAS PRESSURE TABE TYPE OF GAS MIN. SUPPY GAS PRESSURE MAX. SUPPY GAS PRESSURE NATURA 4.5 W.C W.C. PROPANE 11.0 W.C. 14 W.C. WA 10" (254) MIN. REAR CEARANCE 9-1/2" (241) SCAE:.05"=1" DO NOT SCAE DRAWING P/N REV A HEAT ON OFF R 1055 Mendell Davis Drive, Jackson, MS 39272, , unifiedbrands.net 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
13 Floor Kettles model DH/DHT-80 Description Kettle shall be a Groen Model DH-80 or DHT-80, 80- gallon stainless steel steam jacketed unit, operating with a self-contained gas heated steam source contained within the unit. Construction Kettle shall have a type 316 stainless steel interior and be a solid one-piece welded construction. The console and all exposed surfaces shall be stainless steel. All controls shall be mounted on the front panel except the thermostat, which is mounted on the trunnion support arm. The kettle body shall be mounted in a heavy-duty stainless steel combination kettle support tilt trunnion, which in turn, is supported by a stainless steel enclosed base. The base shall be provided with stainless steel tubular legs with adjustable flanged feet. The enclosed support base shall contain a smooth operating, self locking tilt mechanism, and shall be of sanitary, dripproof construction, with interior readily accessible for installation or maintenance. The unit shall be furnished with a heavy reinforced bar rim with a welded in butterfly shaped pouring lip for maximum sanitation and durability. Faucet mounting bracket is standard. Finish Kettle interior shall be polished to a 180 emery grit finish. Exterior of kettle shall be finished to a bright high buff finish, ensuring maximum ease in cleaning and maintaining brilliant appearance. A.S.M.E. Code, C.S.A (A.G.A.) Design Certified Unit shall be ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 50 PSI. Unit shall be design certified by CSA(AGA). (Natural and Propane only.) Sanitation Unit shall be designed and constructed to meet NSF and known health department and sanitation codes and be NSF listed. Drawoff A 2 tangent drawoff shall be supplied on the DHT-80. When drawoff is specified, outlet shall be equipped with removable 1/4 perforated stainless steel strainer. Self-Contained Steam Source Kettle shall have a gas-heated (natural, butane, propane) self-contained steam source to provide kettle temperatures of 150 to approximately 295 F. Unit shall be factory charged with chemically-pure water and rust inhibitors to ensure long life and minimum maintenance. Controls Controls shall include a thermostat, pressure gauge, safety valve, pressure limit control, water inspection window, low water cut off, a gas regulator valve and electronic ignition module. Power ON switch, Power ON indicator light, OW WATER indicator light, and HEATING Model DHT-80 shown light are mounted on the kettle support side console. Gas supply shall shut off automatically when unit is tilted. Performance Features Patented fin tube burner assembly delivers 62-65% efficient combustion. 80 Gallon Model has 150,000 BTU/HR firing rate with 93,000 BTU/HR into the product. Electronic ignition is standard on all the kettle. Unit shall be thermostatically controlled to automatically shut off when desired temperature is reached and turn on when product temperature drops below setting. Installation Specify natural, propane, butane, or specific propane/ butane mixture. Unit requires 1/2 IPS gas line connection and 115 volt electrical connection. No remote steam source required. Options/Accessories Basket inserts (TRI-BC) ift-off cover Hinged cover kit Pan carrier Kettle brush kit Double and single pantry faucets ip strainer 2 tangent draw-off valve with 1/8 perforated disk strainer Solid disk strainer Contour measuring strip Gallon etch marks Origin of Manufacture Kettle shall be designed and manufactured in the United States. Stainless Steel Steam Jacketed Kettle Floor Mounted Tilting Self-Contained Gas Heated 80-Gallon Capacity Short Form Groen Model DH/DHT gallon, self-contained, gas heated (specify natural, propane, butane, or mixture) tilting, steam jacketed kettle. All stainless steel construction with type 316 stainless steel interior and reinforced bar rim, butterfly shaped pouring lip and smooth action mechanical tilt. Patented fin tube burner assembly is 62-65% efficient, with electronic ignition standard. NSF listed, ASME code constructed for 50 PSI and CSA(AGA) design certified (Natural & Propane gas only). Requires 1/2 IPS gas line and 115 volt electric service. Made in USA. Applications Meat Dishes Vegetables Soups Sauces Pasta Rice Pie Fillings Gravies Poultry Seafood 1055 Mendell Davis Drive, Jackson, MS , unifiedbrands.net Please reference our website for the most updated product information and specifications. Groen Floor Kettles, Page B Revised 07/10
14 Model DH/DHT-80 P/N REV A 2 1/8" TYP. (53) 43 7/8" (1115) 2 1/8" TYP. (53) 4 5/8" (116) 28 1/4" (719) 3/4" (19) 17 3/8" (441) 30 1/4" (769) 34"ID 2 1/8" (56) EECTRICA CONNECTION 7/8"(Ø22)HOE (BACK SIDE) 51 3/8" (1305) FRONT VIEW 2 1/2" (63) 5" (125) 2" (50) OPTIONA FAUCET 37 1/2" (952) TOP VIEW 11 3/8" (289) 3 1/4" (83) 8 5/8" (219) KETTE TIT HANDE 4 1/2" (114) 30 1/4" (768) 48 1/8" (1222) 2 1/4" (56) 5 1/4" (135) OPTIONA 2" TANGENT DRAW-OFF KETTE IN FU TIT POSITION FIRING RATE (BTU/HR) FOR BOTH NATURA AND P DH/80 150,000 OPERATING GAS PRESSURE NATURA PROPANE 3.5 in W.C in W.C. 10 5/8" (271) 70" ± 3" POUR PATH (1778 ± 76) INCOMING GAS PRESSURE TABE TYPE OF GAS MIN. SUPPY GAS PRESSURE MAX. SUPPY GAS PRESSURE NATURA 4.5 W.C W.C. PROPANE 11.0 W.C. 14 W.C. OPTIONA EXTRA COST FEATURES : 1. 2" TANGENT SANITARY DRAW-OFF. 3. COUNTERBAANCED COVER MODE # OPTIONA FAUCET WITH SWING SPOUT. 5. DIMENSIONS IN BRACKETS ( ) ARE MM. FAUCET BRACKET FURNISHED AS STANDARD WA 37 1/8" (944) 37 5/8" (954) RIGHT SIDE VIEW 12" (305) REAR WA CEARANCE 1055 Mendell Davis Drive, Jackson, MS 39272, , unifiedbrands.net 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
15 Stainless Steel Steam Jacketed Kettle Floor Kettles model EE Description Kettle shall be a Groen Model EE (Specify 20, 40, 60, 80 or 100 gallon) stainless steel, self-contained, steam jacketed unit operating from an electric heated steam source contained within unit. Construction Kettle proper shall be of type 316 stainless steel, solid one-piece welded construction. All exposed surfaces shall be stainless steel. All controls shall be contained within the cabinet. Kettle body is sheathed in stainless steel and air gap insulated. Faucet mounting bracket is standard. Finish Interior of kettle shall be polished to a 180 emery grit finish. Exterior of kettle shall be finished to a #3 finish, ensuring maximum ease in cleaning and maintaining brilliant appearance. ASME Code and U isting Unit shall be ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 30 PSI. Unit shall be U listed for sale in USA and Canada. Unit shall be registered in Canada with a CRN number. Sanitation Unit shall be designed and constructed to meet NSF and known health department and sanitation codes, and be NSF listed. Drawoff Unit shall have a 2 sanitary tangent drawoff with a 316 stainless steel compression disk drain valve for easy disassembly without tools. arger 3 drawoff available. The drain outlet shall be equipped with a removable 1/4 perforated stainless steel strainer. Cover Cover shall be a one-piece, hinged design dome cover on units up to 40 gallons gallon units shall have a one-piece domed cover with No. 51 counter balanced spring-assisted actuator. Controls All controls shall be contained in a stainless steel enclosure within easy reach of the operator. Controls include a thermostat, pilot light, pressure/vacuum gauge, contactor, water level sight glass, safety valve and low water cut-off. Self-Contained Steam Source Kettle shall have an electric, self-contained steam source to provide kettle temperatures from 150 to approximately 270 F. Unit shall be factory charged with chemically-pure water and rust inhibitors to ensure long life and minimum maintenance. Model EE-40 shown Performance Unit to be thermostatically controlled to shut off automatically when desired temperature is reached and turn on when product temperature falls below desired setting. Outer sheathing and air insulating gap retains heat and keeps kettle exterior cooler to the touch. Installation Unit requires single electrical connection. Specify 208, 240, or 480 Volt, three phase, 50 or 60 HZ. 20 and 40 gallon models available in single phase. Options/Accessories 3 tangent drawoff valve with 1/8 perforated disk strainer Sold disk strainer Basket inserts (TRI-BC) Swing faucets Automatic water filler Kettle brush kit Contour measuring strip Gallon etch marks Single Phase Terminal Block Kit Origin of Manufacture Kettle shall be designed and manufactured in the United States. Floor Mounted, Stationary, Self-Contained Electric Heated 20, 40, 60, 80 or 100- Gallon Capacity Short Form Groen Model EE (Specify 20, 40, 60, 80, 100 gallons) selfcontained, electric heated, stainless steel, steam jacketed kettle. U and NSF listed, ASME code constructed and National Board registered for operation up to 30 PSI. Automatic thermostat control and pressure gauge mounted in convenient stainless steel control housing. Insulation outer sheathing, 2 tangent drawoff and hinged cover standard. Single electrical connection required: specify Voltage Phase/Hz. Made in USA. Applications Meat Dishes Vegetables Soups Sauces Pasta Rice Pie Fillings Gravies Poultry Seafood 1055 Mendell Davis Drive, Jackson, MS , unifiedbrands.net Please reference our website for the most updated product information and specifications. Groen Floor Kettles, Page F Revised 07/11
16 Model EE P/N REV H 1055 Mendell Davis Drive, Jackson, MS 39272, , unifiedbrands.net 2009 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
STEAM JACKETED KETTLES
STEAM JACKETED KETTLES STEAM JACKETED KETTLES For over 100 years, Groen has been a trusted name in quality and durable and versatile kettle production. Why Groen Kettles? Groen Kettles Cook Faster Our
More informationMODEL DEE/4 Domestic STEAM JACKETED KETTLE
OPERATOR MANUAL IMPORTANT INFORMATION, KEEP FOR OPERATOR This manual provides information for: MODEL DEE/4 Domestic STEAM JACKETED KETTLE Self Contained Stainless Steel Floor Mounted Electrically Heated
More informationIMPORTANT INFORMATION KEEP FOR OPERATOR IMPORTANT INFORMATION. Steam Jacketed Kettle
IMPORTANT INFORMATION KEEP FOR OPERATOR IMPORTANT INFORMATION OPERATOR MANUAL Part Number 121019 OM-EE & AE/1 DOMESTIC MODEL: EE & AE/1 Steam Jacketed Kettle Self-Contained Electrically heated Floor mounted
More informationOPERATOR MANUAL. Steam Jacketed Kettle. Self-Contained Electrically heated Floor mounted Tilting
OPERATOR MANUAL Part Number 148783 Rev. E DOMESTIC MODEL: DEE/4 Steam Jacketed Kettle Self-Contained Electrically heated Floor mounted Tilting THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ, UNDERSTAND
More informationOPERATOR MANUAL IMPORTANT INFORMATION IMPORTANT INFORMATION. Steam Jacketed Kettle
IMPORTANT INFORMATION KEEP FOR OPERATOR OPERATOR MANUAL Part Number 147399 MODEL: IMPORTANT INFORMATION OM-EE DOMESTIC EE Steam Jacketed Kettle Self-Contained Electrically heated Floor mounted Stationary
More informationKPS-E, KLS-E AND KLT-E SERIES
KPS-E, KLS-E AND KLT-E SERIES PRODUCT LINE INSTALLATION - OPERATION - MAINTENANCE STATIONARY PEDESTAL MODELS KPS-20E KPS-25E KPS-30E KPS-40E KPS-60E KPS-80E KPS-100E STATIONARY TRI-LEG MODELS KLS-20E KLS-30E
More informationINTEK STEAMER ELECTRIC MODEL XS
PROJECT NAME: INTEK STEAMER ELECTRIC MODEL XS The Intek XS connectionless countertop steamer unit has a pan capacity of 6 pans (2.5 deep 12 x 20 ) or 4 pans (4 deep 12 x 20 ). Unit must be capable of producing
More informationMODEL TA/3 INCLINED MIXER ASSEMBLY Domestic
OPERATOR & SERVICE MANUAL IMPORTANT INFORMATION, KEEP FOR OPERATOR This manual provides information for: MODEL TA/3 INCLINED MIXER ASSEMBLY Domestic Stainless Steel Tilt-Out Drive System Speed Agitator
More informationOM-FT DOMESTIC Part Number
? IMPORTANT INFORMATION? KEEP FOR OPERATOR? IMPORTANT INFORMATION? OPERATOR MANUAL MODELS: FT, MW/FT, PT (b Jacketed) GT, MW/GT, GPT (Full Jacketed) Steam Jacketed Kettles DOMESTIC Part Number 121008 Stainless
More informationAM SELECT DISHWASHER STANDARD FEATURES MODEL OPTIONS AT EXTRA COST ACCESSORIES VOLTAGE. Item # Quantity C.S.I. Section AM15
AM SELECT DISHWASHER Item # Quantity C.S.I. Section 11400 AM SELECT DISHWASHER STANDARD FEATURES.74 gallons per rack final rinse water 58 racks per hour hot water sanitizing 65 racks per hour chemical
More informationKLT-G Series GAS TILTING FLOOR KETTLE INSTALLATION - OPERATION - MAINTENANCE
KLT-G Series GAS TILTING FLOOR KETTLE INSTALLATION - OPERATION - MAINTENANCE BLODGETT OVEN COMPANY www.blodgett.com 44 Lakeside Avenue, Burlington, Vermont 05401 USA Manufacture Service Questions: 866-518-3977
More informationBOHEC R CRS86A DISHWASHER STANDARD FEATURES MODEL ACCESSORIES DIRECTION OF OPERATION VOLTAGE OPTIONS AT EXTRA COST
Item # Quantity C.S.I. Section 11400 DISHWASHER STANDARD FEATURES 244 racks per hour Opti-RinSe system Ball detent clutch conveyor drive mechanism Top mounted controls Stainless steel anti-clogging wash
More informationCount on LoLo for the following:
P R O D U C T LI N E Count on LoLo for the following: Lowest price; best value for the money Local inventory for immediate availability Controls that are simple to operate Heavy-duty design Stainless steel
More informationOWNER S MANUAL MODULAR DIRECT CONNECTED TILTING STEAM JACKETED KETTLE
OWNER S MANUAL MODULAR DIRECT CONNECTED TILTING STEAM JACKETED KETTLE MODELS: MT6 MT6T6 MT10 MT10T10 MT10T6 LFT6 LFT10 LFT10T6 LFT10T10 Form Number: S-2306 REV:C 10/12 Printed in U.S.A. 35 Garvey Street
More informationTHIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ, UN DERSTAND AND FOLLOW THE INSTRUCTIONS AND WARNINGS CONTAINED IN THIS MANUAL.
? IMPORTANT INFORMATION? KEEP FOR OPERATOR? IMPORTANT INFORMATION? OPERATOR MANUAL Part Number 121064 OM-TD/FPC DOMESTIC MODEL: TD/FPC Braising Pan Stainless Steel Table Top Mounted Manual Tilting Electrically
More informationMODELS BPM-15/30/40GS ECLIPSE ERGONOMIC TILTING BRAISING PAN
OPERATOR MANUAL IMPORTANT INFORMATION, KEEP FOR OPERATOR This manual provides information for: MODELS BPM-15/30/40GS ECLIPSE ERGONOMIC TILTING BRAISING PAN Stainless Steel Manual Tilt Gas Heated THIS MANUAL
More informationGAS-FIRED PRESSURIZED LOW INTENSITY INFRARED HEATERS SERIES TLP
GAS-FIRED PRESSURIZED LOW INTENSITY INFRARED HEATERS SERIES TLP CATALOG 9-117.1 JUNE, 2003 TABLE OF CONTENTS Modine's TLP Series sets the industry standard for low intensity infrared heating performance
More informationMODEL DH/INA/2-100 STEAM JACKETED KETTLE
OPERATOR MANUAL IMPORTANT INFORMATION, KEEP FOR OPERATOR This manual provides information for: MODEL DH/INA/2-100 STEAM JACKETED KETTLE Self-Contained Gas Heated Floor Mounted Tilting THIS MANUAL MUST
More informationFTM-L SERIES SINGLE OR TWIN DIRECT STEAM MIXER KETTLE COMPLETE WITH HYDRAULIC POWER TILT BRIDGE INSTALLATION - OPERATION - MAINTENANCE
FTM-L ERIE INGLE OR TWIN DIRECT TEAM MIXER KETTLE COMPLETE WITH HYDRAULIC POWER TILT BRIDGE INTALLATION - OPERATION - MAINTENANCE INGLE MODEL FTM-40L FTM-60L FTM-80L FTM-100L TWIN MODEL FTM-(2)40L FTM-(2)60L
More informationMT 25/40 GALLON SERIES
MT 25/40 GALLON SERIES MODULAR BASE DIRECT STEAM TILTING KETTLES INSTALLATION - OPERATION - MAINTENANCE MODELS MT-25 MT-40 Telephone: (802) 658-6600 Fax: (802) 864-0183 www.marketforge.com PN 14-0323 Rev
More informationKPT/KLT-DS Series DIRECT STEAM TILTING FLOOR KETTLE INSTALLATION - OPERATION - MAINTENANCE
KPT/KLT-DS Series DIRECT STEAM TILTING FLOOR KETTLE INSTALLATION - OPERATION - MAINTENANCE BLODGETT OVEN COMPANY www.blodgett.com 44 Lakeside Avenue, Burlington, Vermont 05401 USA Manufacture Service Questions:
More informationJFT Flight Machine. JFT Flight Machine. Models. Options. Standard Features. JFT Flight Machine
JFT Flight Machine Models JFT Flight Machine Options Project Item Quantity CSI Section 00 Approval Date Blower dryer Additional wash section Additional load module Additional unload module (8m) wash down
More informationCanning Shed/Facility Equipment Specifications
Canning Shed/Facility Equipment Specifications Item Qty Description 1 1 ea WALK IN COOLER Fast Trak Indoor One Compartment Walk In, 8' x 8' x 7' 7" H, compartments, cooler with smooth aluminum interior
More informationAM-14/AM-14C DISHWASHERS
AM-14/AM-14C DISHWASHERS Item # Quantity C.S.I. Section 11400 AM-14/AM-14C DISHWASHERS STANDARD FEATURES 53 racks per hour hot water sanitizing 16 gauge stainless steel tank, chamber, doors, frame and
More informationINSTALLATION & OPERATION MANUAL
INSTALLATION & OPERATION MANUAL GS, GL & GT SERIES FULLY STEAM JACKETED GAS KETTLES MODEL GS25E GS30E GL40E GS60E GL80E GT100E GT5E GT150E ML-52633 ML-52634 ML-52635 ML-52660 ML-52637 ML-52638 ML-52639
More informationFT900SDBD DUAL RINSE FLIGHT-TYPE DISHWASHER
Item # Quantity C.S.I. Section 11400 FT900SDBD DUAL RINSE FLIGHT-TYPE DISHWASHER STANDARD FEATURES Opti-RinSe system with dual rinse Water usage 72 gph @ 20 psi Microprocessor controls Low temperature
More informationProcess Water Heater For Industrial Applications All Voltages, Single or Three Phase Up To 88 KW
MODEL V Process Water Heater For Industrial Applications All Voltages, Single or Three Phase Up To 88 KW Features Industrial Grade Construction Stainless steel pressure vessel provides maximum service
More informationModels. Options. Standard Features. LoH 2 O
LoH O Models LoH O Standard Features Uses 8 gallons (9. liters) of water per hour with sanitizing hot water rinse All tanks and hoods constructed from durable stainless steel with a No. finish and heliarced
More informationPreparation Table Raised Condiment Rail models 8000N
Preparation Table Raised Condiment Rail models 8000N model 8148N 8260N 8268N 8383N 835N 84111N Description: Available in six convenient sizes, 48 one door, 60 & 68 two door, 83 and 5 three door, and 111
More informationSECTION FOOD COOKING EQUIPMENT
PART 1 GENERAL 1.1 DESCRIPTION SECTION 11 44 00 FOOD COOKING EQUIPMENT SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Delete other items or paragraphs in the section that are
More informationMODELS BPM-15/30/40E(C,A) & BPP-30/40E(C,A) Domestic ERGONOMIC TILTING BRAISING PAN
OPERATOR MANUAL IMPORTANT INFORMATION, KEEP FOR OPERATOR This manual provides information for: MODELS BPM-15/30/40E(C,A) & BPP-30/40E(C,A) Domestic ERGONOMIC TILTING BRAISING PAN Stainless Steel Manual
More informationFT900BD FLIGHT-TYPE DISHWASHER
Item # Quantity C.S.I. Section 11400 FT900BD FLIGHT-TYPE DISHWASHER STANDARD FEATURES Opti-RinSe system Water usage 120 gph @ 20 psi Microprocessor controls Low temperature alert Blower dryer with 2 H.P.
More informationC44A/C44AW DISHWASHER
Item # Quantity C.S.I. Section 11400 C44A/C44AW DISHWASHER STANDARD FEATURES 202 racks per hour C44A 126 racks per hour C44AW Opti-RinSe system Ball detent clutch conveyor drive mechanism Top mounted controls
More informationFTM-LE SERIES SINGLE OR TWIN ELECTRIC STEAM MIXER KETTLE COMPLETE WITH HYDRAULIC POWER TILT BRIDGE INSTALLATION - OPERATION - MAINTENANCE
FTM-LE SERIES SINGLE OR TWIN ELECTRIC STEAM MIXER KETTLE COMPLETE WITH HYDRAULIC POWER TILT BRIDGE INSTALLATION - OPERATION - MAINTENANCE SINGLE MODELS FTM-40LE FTM-60LE FTM-80LE FTM-100LE TWIN MODELS
More informationStandard Features. Performance/Capacities
TSC-66 Traditional Power/Connections Approximate Total Load AMPS 208V / 60HZ / 3PH 51.8 208V / 60HZ / 1PH 88.3 230V / 60HZ / 3PH 47.8 230V / 60HZ / 1PH 81.5 460V / 60HZ / 3PH 23.9 Booster Heater Options
More informationSECTION (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS
SECTION 22 34 00 (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS System shall provide a complete hot water return throughout the entire system with balancing (flow control) valves not less than 10 feet from
More informationSECTION WATER HEATERS
SECTION 15457 WATER HEATERS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: A complete hot water generating system with necessary accessories as indicated on Construction Documents, as specified, and
More informationTilting Floor Kettles. The Perfect Kettle. Modular Base Tilting Kettles. Stationary Floor Kettles 50 PSI. Quad-leg Kettle
The Perfect Kettle Kettles are the perfect substitute for a large stock pot taking up space on an overcrowded range. Kettles take over tasks such as boiling pasta, simmering sauces, rethermalizing food
More informationFCT-CE SERIES ELECTRIC TILTING KETTLE W/HAND CRANK PARTS AND SERVICE MANUAL
FCT-CE SERIES ELECTRIC TILTING KETTLE W/HAND CRANK PARTS AND SERVICE MANUAL EFFECTIVE SEPTEMBER 12, 2014 Superseding All Previous Parts Lists. The Company reserves the right to make substitution in the
More informationCADDY CORPORATION. Utility Distribution Systems
Food Service Equipment Air Systems Utility Distribution Systems page 1 of 2 Equipment Specifications General Specifications Caddy Corporation of America Energy Distribution and Management System, which
More informationCL64T INDUSTRIAL TOTE WASHER
Item # Quantity C.S.I. Section 11400 STANDARD FEATURES Selectable Speed 4, 5, 6 feet/minute Opti-RinSe system Rapid return conveyor drive mechanism Insulated hinged double doors with door interlock switches
More informationGas and Electric Convection Ovens
Gas and Electric Convection Ovens TURBO-FLOW TURBO-FLOW TURBO-FLOW TURBO-FLOW Door enhancements have increased the durability of the door mechanisms Dual-open doors one hand opens and closes both doors
More informationVENTLESS DOOR-TYPE DISHWASHER
Item # Quantity C.S.I. Section 11400 VENTLESS STANDARD FEATURES Internal condensing system minimizes water vapor Does not require a vent hood Energy recovery Sense-A-Temp 70 F rise electric booster heater.74
More informationFT1000S BASE FLIGHT-TYPE DISHWASHER
Item # Quantity C.S.I. Section 11400 FLIGHT-TYPE DISHER STANDARD FEATURES Pumped rinse system (pressure gauge not required) Water usage 58 gph Digital controls with machine diagnostics Low temperature
More informationOPERATOR AND SERVICE MANUAL
IMPORTANT INFORMATION KEEP FOR OPERATOR IMPORTANT INFORMATION OPERATOR AND SERVICE MANUAL OM/SM-TDB/6 Part Number 148732 DOMESTIC MODEL: TDB/6 Steam Jacketed Kettle Self-Contained Electrically heated Table
More informationCMA Dishmachines Knott Avenue Garden Grove, CA Undercounter High Temperature Dishwasher. Service Replacement Parts.
CMA Dishmachines 1700 Knott Avenue Garden Grove, CA 981 Toll Free: 1- (800) 8-617 Fax: 1- (71) 89-11 Service Replacement Parts Undercounter High Temperature Dishwasher Model: UC6e M Machine Serial No.
More informationOPERATOR AND SERVICE MANUAL
IMPORTANT INFORMATION KEEP FOR OPERATOR IMPORTANT INFORMATION OPERATOR AND SERVICE MANUAL Part Number 128417 OM/SM-DH-CE INTERNATIONAL Models: DH-CE Mark DHT-CE Mark Steam Jacketed Kettle Self-contained
More informationSteam Jacketed Kettle
OPERATOR MANUAL IMPORTANT INFORMATION, KEEP FOR OPERATOR This manual provides information for: Steam Jacketed Kettle MODEL: LKS-45G THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ, UNDERSTAND AND
More informationINSTALLATION, OPERATION AND REPAIR MANUAL GAS KETTLE KGL-T KET-07 (216) CLEVELAND RANGE INC East 179th St. Cleveland, Ohio U.S.A.
INSTALLATION, OPERATION AND REPAIR MANUAL GAS KETTLE MODEL # KGL KGL-T CLEVELAND RANGE INC. 1333 East 179th St. Cleveland, Ohio U.S.A. 44110 (216)481-4900 222-01CO 9102 REV:0 KET-07 IMPORTANT THE FOLLOWING
More informationMODELS TDH(C)-20/24/40/48(C,A) Domestic STEAM JACKETED KETTLE
OPERATOR MANUAL IMPORTANT INFORMATION, KEEP FOR OPERATOR This manual provides information for: MODELS TDH(C)-20/24/40/48(C,A) Domestic STEAM JACKETED KETTLE Self Contained Table Top Mounted Gas Heated
More informationMT 6/10 GALLON SERIES
MT 6/10 GALLON SERIES MOULAR BASE IRT EAM TILTING KETTLES INALLATION - OPERATION - MAINTENANCE MOELS ON CABINET BASE MT6 MT10 MT6T6 MT10T6 MT10T10 MOEL WITH GAS BOILERS MT6G MT10G MT6T6G MT10T6G MT10T10G
More informationCART & TROUGH ASSEMBLY for BRAISING PAN UNITS
OPERATOR MANUAL IMPORTANT INFORMATION, KEEP FOR OPERATOR This manual provides information for: CART & TROUGH ASSEMBLY for BRAISING PAN UNITS Stainless Steel THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE.
More informationCL44eR DISHWASHER STANDARD FEATURES MODEL OPTIONS AT EXTRA COST ACCESSORIES DIRECTION OF OPERATION VOLTAGE. Item # Quantity C.S.I.
Item # Quantity C.S.I. Section 11400 DISHWASHER STANDARD FEATURES Energy recovery 202 racks per hour Opti-RinSe system 30 KW electric booster heater Rapid return conveyor drive mechanism Insulated hinged
More informationTDB/6 Domestic STEAM JACKETED KETTLE
OPERATOR/SERVICE MANUAL IMPORTANT INFORMATION, KEEP FOR OPERATOR This manual provides information for: TDB/6 Domestic STEAM JACKETED KETTLE Self Contained Electrically Heated Table Top Mounted Tilting
More informationDesign and Construction Standards SECTION PLUMBING EQUIPMENT
SECTION 15450 PLUMBING EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES: A. Water heaters. B. Packaged water heating systems. C. Water storage tanks. D. Water softeners. E. Pumps. F. Circulators. 1.2 REFERENCES
More informationSteam Jacketed Kettles All products that
Contents Falcon has teamed up with Groen, leaders in steaming and boiling technology, based in the USA. Groen were established in 1907 and are recognised as the world s largest manufacturer of steam-jacketed
More informationMT 25/40 GALLON SERIES
MT 25/40 GALLON SERIES MODULAR BASE ELECTRIC TILTING KETTLES INSTALLATION - OPERATION - MAINTENANCE MODELS MT-25EO MT-40EO Telephone: (802) 658-6600 Fax: (802) 864-0183 www.marketforge.com PN 14-0330 Rev
More informationIntek Steamer model XSG-5
Intek Steamer model XSG-5 Model Numbers XSG-5 Description The Intek XSG connectionless countertop steamer unit has a pan capacity of 5 pans (2.5 deep 12 x 20 ). Unit must be capable of producing steam
More informationFT1000 ENERGY RECOVERY WITH BLOWER DRYER FLIGHT-TYPE DISHWASHER
701 S Ridge Avenue, Troy, OH 45374 Item # Quantity WITH BLOWER DRYER FLIGHT-TYPE DISHER C.S.I. Section 11400 STANDARD FEATURES Pumped rinse system (pressure gauge not required) Water usage 58 gph Digital
More informationEB-M*-** Midsize Electro-Boiler BL509. EB-S-**/EB-WX-**-2 TS Standard Electro-Boiler BL506. EB-CX-** TS Commercial Electro-Boiler BL508
Electro-HELPS IX Boiler, Submittal Data Sheets These provide the mechanical technical details often required for architects/design engineers, shop drawings, etc. They are also useful in providing additional
More informationCL64e DISHWASHER DISHWASHER STANDARD FEATURES MODEL OPTIONS AT EXTRA COST ACCESSORIES DIRECTION OF OPERATION VOLTAGE
Item # Quantity C.S.I. Section 11400 DISHWASHER STANDARD FEATURES 342 racks per hour Opti-RinSe system Rapid Return Conveyor Drive Mechanism Insulated hinged double doors with door interlock switches 19.5
More informationCLPS66e DISHWASHER DISHWASHER STANDARD FEATURES MODEL OPTIONS AT EXTRA COST ACCESSORIES DIRECTION OF OPERATION VOLTAGE
Item # Quantity C.S.I. Section 11400 DISHWASHER STANDARD FEATURES 202 racks per hour Opti-RinSe system Rapid Return Conveyor Drive Mechanism Insulated hinged double doors with door interlock switches 19.5
More informationINNOVATIONS for efficiency, speed and quality. canteens, CENTRAL KITCHENS, READY meals INDUSTRY
INNOVATIONS for efficiency, speed and quality. canteens, CENTRAL KITCHENS, READY meals INDUSTRY Manufacturer since 1955 F R A N C E TILTING kettle with mixer Multi-application. Homogeneity of cooking.
More informationFT1000 FLIGHT-TYPE DISHWASHER
Item # Quantity C.S.I. Section 11400 FLIGHT-TYPE DISHER STANDARD FEATURES Pumped rinse system (pressure gauge not required) Water usage 58 gph Digital controls with machine diagnostics Low temperature
More informationSERIES 24. Series 24 Features. Commercial, Forced Draft, Hot Water or Steam Boiler. The right fit for any commercial job
SERIES Commercial, Forced Draft, Hot Water or Steam Boiler Sizes from to,8 MBH output The right fit for any commercial job The Series is built to handle any installation - businesses, institutions, apartments,
More informationFT1000 ENERGY RECOVERY WITH BLOWER DRYER FLIGHT-TYPE DISHWASHER
701 S Ridge Avenue, Troy, OH 45374 Item # Quantity WITH BLOWER DRYER FLIGHT-TYPE DISHER C.S.I. Section 11400 STANDARD FEATURES Pumped rinse system (pressure gauge not required) Water usage 58 gph Digital
More informationMODELS NHFP & NHFP(E) BRAISING PANS
OPERATOR MANUAL IMPORTANT INFORMATION, KEEP FOR OPERATOR This manual provides information for: MODELS NHFP & NHFP(E) BRAISING PANS Stainless Steel Power Tilting Gas Heated THIS MANUAL MUST BE RETAINED
More informationFUEL-FIRED VERTICAL TUBELESS BOILERS
FUEL-FIRED VERTICAL TUBELESS BOILERS 4 60 P orizontal and Vertical Feedwater / Condensate Return Systems and Blow-down Tanks FULTON FUEL-FIRED VERTICAL TUBELESS BOILERS FULTON: AN INDUSTRY LEADER SINCE
More informationConveyor. AJ-44 Vision Series. Standard Features. Power/Connections. Performance/Capacities
AJ-44 Vision Series Standard Features Power/Connections Approximate Total Load AMPS 208V / 60HZ / 3PH 48.4 208V / 60HZ / 1PH 82.3 230V / 60HZ / 3PH 44.4 230V / 60HZ / 1PH 75.5 460V / 60HZ / 3PH 22. 2 Booster
More informationALTAIR II CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL
ALTAIR II CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL EFFECTIVE MAY, 0 Superseding All Previous Parts Lists. The Company reserves the right to make substitution in the event that items specified are
More informationCL44eN-BAS DISHWASHER
Item # Quantity C.S.I. Section 11400 CL44eN-BAS DISHWASHER STANDARD FEATURES 202 racks per hour Opti-RinSe system Rapid return conveyor drive mechanism Insulated hinged double doors with door interlock
More informationF-T, FT-P, F-L AND F-P SERIES
F-T, FT-P, F-L AND F-P ERIE 2/3 JACKETED DIRECT TEAM TILTING & TATIONARY KETTLE INTALLATION - OPERATION - MAINTENANCE TILTING TRI-LEG TILTING PEDETAL TATIONARY TRI-LEG TATIONARY PEDETAL FT-L FT-30L FT-40L
More informationFT900S FLIGHT-TYPE DISHWASHER
Item # Quantity C.S.I. Section 11400 FT900S FLIGHT-TYPE DISHWASHER STANDARD FEATURES Opti-RinSe system Water usage 102 gph @ 20 psi (standard height) Microprocessor controls Low temperature alert Single
More informationDIRECT FIRED HOT WATER BOILER Atmospheric Gas Fired T Models 300,000 to 6,800,000 BTU Gas Fired
INDUSTRIAL DIRECT FIRED HOT WATER BOILER Atmospheric Gas Fired T Models 300,000 to 6,800,000 BTU Gas Fired 201 Hot Water Boilers THE PARKER DESIGN A time proven product backed by one of the largest and
More informationFT900S FLIGHT-TYPE DISHWASHER
Item # Quantity C.S.I. Section 11400 FT900S FLIGHT-TYPE DISHWASHER STANDARD FEATURES Opti-RinSe system Water usage 114 gph @ 20 psi (standard height) Microprocessor controls Low temperature alert Single
More informationCLCS76eN-BAS DISHWASHER
Item # Quantity C.S.I. Section 11400 DISHWASHER STANDARD FEATURES 245 racks per hour Opti-RinSe system Rapid return conveyor drive mechanism Insulated hinged double doors with door interlock switches 19.5
More informationPart Number DOMESTIC. HyPerSteam Atmospheric Convection Steamer BETA 1.0
? IMPORTANT INFORMATION? KEEP FOR OPERATOR? IMPORTANT INFORMATION? OPERATOR MANUAL OM-HY-3E(S eta) Part Number 121026 DOMESTIC MODEL: Self-Contained Electric Heated Capacity: HY-3E/ HyPerSteam Atmospheric
More informationHORIZONTAL FIRE TUBE BOILERS Piping (HVAC) Pumping Equipment (HVAC).
SECTION 15555 HORIZONTAL FIRE TUBE BOILERS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15510 - Piping (HVAC). 2. 15540 - Pumping Equipment (HVAC). 1.02 SUBMITTALS A. Submit properly identified
More informationBryan Flexible Water Tube. Ultra-High Efficiency Condensing Hot Water Boilers. 3,000,000 BTUH Natural Gas Fired
Form No. 8700 Bryan Flexible Water Tube TM Triple-Flex Series Ultra-High Efficiency Condensing Hot Water Boilers 3,000,000 BTUH Natural Gas Fired Minimum 90% Thermal Efficiency at 160 F Return with 20
More informationRedHots Chef s Line. Countertop Equipment
RedHots Chef s Line Countertop Equipment RedHots Chef s Line A full range of models including fryers, charbroilers, griddles and hot plates, the Chef's Line series is especially engineered for foodservice
More informationSECTION CUSTOM FABRICATED FOODSERVICE EQUIPMENT
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 11 40 11 CUSTOM FABRICATED FOODSERVICE EQUIPMENT SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Delete other items or paragraphs in
More informationSTERO SCT-94SC/108SC/120SC CONVEYOR SERIES
Item #: A/A File #: SCT-94SC/108SC/120SC SCT-94SC/108SC/120SC Rack Conveyor Series: Provides high capacity warewashing utilizing a powerful scrapper in combination with our heavy duty conveyor, creating
More informationSECTION PLUMBING EQUIPMENT
PART 1 GENERAL 1.1 SECTION INCLUDES A. Water heaters B. Packaged water heating systems C. Water storage tanks D. Water softeners E. Pumps F. Circulators 1.2 REFERENCES SECTION 22 30 00 PLUMBING EQUIPMENT
More informationGARAGE / WORKSHOP INFRARED HEATERS
GARAGE / WORKSHOP INFRARED HEATERS 22,000-25,000 BTU/HR Heater For: Garages / Workshops Barns / Utility Buildings / Storage Sheds Animal Pens / Stalls Loading Docks Building Construction Sites Doorways
More informationCL64eN-BAS DISHWASHER
Item # Quantity C.S.I. Section 110 DISHWASHER STANDARD FEATURES 342 racks per hour Opti-RinSe system Rapid return conveyor drive mechanism Insulated hinged double doors with door interlock switches 19.5
More informationGUIDE SPECIFICATION ADVANCED RADIANT SYSTEMS DU/DUH DUAL OUTPUT RANGE INFRARED TUBE HEATERS
GUIDE SPECIFICATION ADVANCED RADIANT SYSTEMS DU/DUH DUAL OUTPUT RANGE INFRARED TUBE HEATERS SECTION 15540 FUEL- FIRED HEATERS (Alternate - SECTION 235523 - GAS-FIRED RADIANT HEATERS) This section is based
More informationGB Condensing Gas Boiler
Engineering Submittal Sheet Boiler Overview C US Engineering Specifications There shall be provided and installed a quantity of Buderus GB162/100 wall-hung condensing hot water boiler(s), suitable for
More informationDUKE UNIVERSITY CONSTRUCTION STANDARDS
1 22 40 00 Plumbing Fixtures 1. General A. Definitions 1. Section includes a. Water closets and urinals b. Lavatories, sinks, and service sinks c. Electric water coolers, drinking fountains, d. Showers
More informationBLP-E ELECTRIC FLOOR MODEL BRAISING PAN WITH ELECTRIC POWER TILT INSTALLATION OPERATION MAINTENANCE
BLP-E ELECTRIC FLOOR MODEL BRAISING PAN WITH ELECTRIC POWER TILT INSTALLATION OPERATION MAINTENANCE BLODGETT OVEN COMPANY www.blodgett.com 44 Lakeside Avenue, Burlington, Vermont 05401 USA Telephone: (802)
More informationHoffman Specialty Pump Products
Condensate Units Boiler Feed Units Vacuum Heating Units Hoffman Specialty Pump Products S-0692C INDEX Condensate Return Units Series WC Series WCS Series SCC Boiler Feed Units Stock Watchman Condensate
More informationMODEL HY-6CAV DOMESTIC HYPLUS ATMOSPHERIC STEAMER CAVITIES
WATER FILL LOW WATER HIGH PRESSURE READY ON OPERATOR MANUAL IMPORTANT INFORMATION, KEEP FOR OPERATOR This manual provides information for: MODEL HY-6CAV DOMESTIC HYPLUS ATMOSPHERIC STEAMER CAVITIES For
More informationCool IR. Model C104 - Cooling System. Instruction Manual
Cool IR Model C104 - Cooling System Instruction Manual February 26, 2015 Research, Inc. USA Ph: 952.949-9009 Fax: 952.949-9559 tsdsales@researchinc.com www.researchinc.com Table of Contents List of Figures...
More informationFT900D DUAL RINSE FLIGHT-TYPE DISHWASHER
Item # Quantity C.S.I. Section 11400 FT900D DUAL RINSE FLIGHT-TYPE DISHWASHER STANDARD FEATURES Opti-RinSe system with dual rinse Water usage 90 gph @ 20 psi Microprocessor controls Low temperature alert
More informationCumberland Heating Systems
Cumberland Heating Systems Cumberland "Radiant" Brooder Clean Burning...Fuel Efficient Maintaining proper in-house temperature is critical in climate control. A consistent, stressfree environment promotes
More informationPRICE BOOK EFFECTIVE JUNE 15, 2017
20 17 PRICE BOOK EFFECTIVE JUNE 15, 2017 WARE WASHING FRUIT & VEGETABLE WASHING, SEAFOOD DEGLAZING, PROTEIN THAWING SILVERWARE PREWASHING Power Soak Streamline your operation with a uniform wash action,
More informationINSTALLATION and OPERATION MANUAL DIRECT STEAM KETTLES MOUNTED ON ELECTRIC BOILER BASE CABINET MODELS: EMT-6 EMT-10 EMT-12 EMT-6-6 EMT-10-6 EMT-10-10
INSTALLATION and OPERATION MANUAL DIRECT STEAM KETTLES MOUNTED ON ELECTRIC BOILER BASE CABINET MODELS: EMT-6 EMT-10 EMT-12 EMT-6-6 EMT-10-6 EMT-10-10 CROWN FOOD SERVICE EQUIPMENT LTD. 70 OAKDALE ROAD,
More informationPRICE BOOK EFFECTIVE JANUARY 1, 2018
20 18 PRICE BOOK EFFECTIVE JANUARY 1, 2018 WARE WASHING SILVERWARE PREWASHING FRUIT & VEGETABLE WASHING, SEAFOOD DEGLAZING, PROTEIN THAWING Power Soak Streamline your operation with a uniform wash action,
More informationTitle: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: HVAC Standards
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationGAS-FIRED HIGH INTENSITY INFRARED HEATERS
GAS-FIRED HIGH INTENSITY INFRARED HEATERS CATALOG 9-116.1 MARCH, 2003 TABLE OF CONTENTS Modine's MT Series is a gas-fired, high intensity ceramic infrared heater. Ideal for spot heating, the MT series
More informationHeating Systems. Brooders, Space Heaters and QuadRadiant Heaters
Heating Systems Brooders, Space Heaters and QuadRadiant Heaters Let s grow together. QUADRATHERM QuadRadiant Heater Patent Pending With Chore-Time s QUADRATHERM Heater, the Most Innovative Concept in Heating
More information