PENNBARRY COMMERCIAL AND LIGHT INDUSTRIAL FANS

Transcription

1 PENNBARRY COMMERCIAL AND LIGHT INDEX COMMERCIAL FANS AXIAL BREEZEWAY (BZW) DOMEX (DXA) HI-EX (HX) POWERED AIRETTE (AE) CENTRIFUGAL CENTREX INLINER (SX) CENTREX ROUND (REX) DOMEX (DX) DYNAFAN (LC) DYNAMO (D) FUMEX (FX) LINEA (LF) MUFFAN (FS) MUFFAN (MU) ZEPHYR CABINET (ZC, ZCC) ZEPHYR (Z) SPECIALTY GRAVITY AIRETTE (AEG) GRAVITY VENTILATORS (GRV) PENNHOUSE (PH) ROOF CURBS (RC) WEATHER CAPS (WC) AXIAL HOODED ROOF (HRD, HRB, HRR, HTB) PANEL (PN) TUBEAXIAL (TXD, TXB) UPBLAST ROOF (ULD, ULB, UTD, UTB) VANEAXIAL (VXD, VXB) CENTRIFUGAL EFFICIENT SILENT INLINER (ESI) FREE STANDING (VCR) INDUSTRACON (IND) TUBULAR INLINE (TUB) UNHOUSED (ESP) VERSAPLUG (VSP) SPECIALTY BIFURCATOR (AXD, AXB) BIFURCATOR (SSB, TSB) FUME EXHAUST (FH, FHL) HYBLAST (HY) KITCHEN HOODS (PBKH) MAKE-UP AIR DIRECT-FIRED (SDF) INDIRECT-FIRED (IDF) This section contains product information only. For technical data please visit vendor website. For pricing and availability please contact your ECCO Supply Sales Representative. Expert Service. Quality Products. Since ECCO Supply

2 COMMERCIAL CENTRIFUGAL FANS CENTREX INLINER (SX) CENTRIFUGAL INLINE FANS, DIRECT DRIVE AND BELT DRIVE Widely used in square ducts as clean air boosters in both supply and exhaust systems where the installation of conventional blowers is impractical. Their compact design gives designers an excellent alternative to conventional blowers. Can be installed either horizontally, vertically or at any angle determined by the duct work. Full size removable panels enable easy access to the fan interior. Square inline duct-mount Capacity: from ,502 cfm; 0 3.5" w.g. Model SX_BC: Belt Drive Model SX_BHC: Belt Drive, High Pressure Model SX_VSR/Q-C: Direct Drive CENTREX ROUND (REX) TUBULAR, CENTRIFUGAL INLINE FANS, DIRECT DRIVE AND BELT DRIVE Efficient aluminum, backwardly inclined wheels and aerodynamic straightening vanes give the Centrex a quiet efficiency unmatched by competitive models. Tubular inline duct-mount Aluminum construction Capacity: from 75 22,054 cfm; 0 3.0" w.g. Model REX_B: Belt Drive Model REX_VTR/Q: Direct Drive DOMEX (DX) CENTRIFUGAL ROOF EXHAUSTERS, DIRECT DRIVE AND BELT DRIVE Designed for roof mounted installations in low to medium pressure applications. Ideal for general purpose exhaust applications including bathrooms, garages, general kitchen areas, offices, churches, dormitories, factories, large warehouses and other relatively clean air applications. Capacity: from 44 46, 640 cfm; 0 1.5" w.g. Model DX_B: Belt Drive, Sizes DX06B DX36B Model DX-VSR/Q: Direct Drive, Sizes DX06R DX18V Model JB48: Belt Drive, High Capacity KB420: Belt Drive, High Capacity DYNAFAN (LC) CENTRIFUGAL DOWNBLAST ROOF EXHAUSTERS, LOW CONTOUR Completely self contained packaged exhaust systems. Direct drive units are effective at providing a quiet steady exhaust at moderate resistance. Belt driven LC Dynafans offer a wide range of sizes. Units are low and inconspicuous, with a unique design that features motor mounting beside the wheel rather than atop the wheel. Roof-mount, low contour downblast Capacity: from 39 17,516 cfm; 0 1.5" w.g. Model LC_BC: Belt Drive Model LC_VSR-C: Direct Drive ECCO Supply

3 COMMERCIAL CENTRIFUGAL FANS (cont d) DYNAMO (D) CENTRIFUGAL FANS SWSI, Class I, and Arrangement 9 and 10 general purpose air moving devices, used for supply or exhaust applications in commercial, institutional and industrial HVAC systems. At the heart of the Dynamo is a computer-designed, backward inclined, centrifugal wheel. This heavy duty, non-overloading aluminum wheel assures low noise and high efficiency performance. Roof/floor/inline mount utility blower Class I heavy-gauge galvanized steel Backward inclined wheel UL 762 rated for grease laden air exhaust Capacity: from ,150 cfm; 0 5.0" w.g. FUMEX (FX) CENTRIFUGAL UPBLAST ROOF EXHAUSTERS, DIRECT DRIVE AND BELT DRIVE Designed for medium to high pressure applications. Can be either roof or wall mounted. Suitable for general ventilation, and specially designed to discharge contaminated or grease-laden air or heat/smoke up and away from building surfaces. The optional Fatrap restaurant grease exhaust configuration makes Fumex fans particularly suited for all food service applications and chemical fume hoods. Additionally, the heat and smoke configuration is used in case of emergencies or high-temperature exhaust applications. Roof-mount, spun aluminum upblast UL 762 rated for grease laden air exhaust Capacity: from 54 30,609 cfm; 0 4.7" w.g. Model FMX50B: High Capacity, High Volume Model FX_B: Belt Drive Model FX_BFT: Belt Drive with Fatrap Model FX_BH: High Pressure Wheel Model FX_BHFT: High Pressure Wheel with Fatrap Model FX_BH-HS: High Pressure Wheel, Belt Drive, Heat/Smoke Removal Model FX_B-HS: Belt Drive, Heat/Smoke Removal Model FX_VSR/Q: Direct Drive Model FX_VSR/Q-TF: Direct Drive with Fatrap Model WFX_B: Wall Fumex, Belt drive Model WFX_BFT: Wall Fumex, Belt Drive with Fatrap Model WFX_BH: Wall Fumex, High Pressure Wheel Model WFX_BHFT: Wall Fumex, High Pressure Wheel with Fatrap Model WFX_VSR/Q: Wall Fumex, Direct Drive Model WFX_VSR/Q-FT: Wall Fumex, Direct Drive with Fatrap LINEA (LF) CENTRIFUGAL DOWNBLAST ROOF EXHAUSTERS Suitable for various industrial, commercial and public building applications where there is a need for an efficient roof exhauster in an aesthetically pleasing housing. Useful for school buildings, churches, hospitals, apartments, motels, shopping centers, factories, and commercial buildings, as well as all types of government facilities and in every climate condition. Roof-mount, spun aluminum downblast Capacity: from 17,920 cfm; 0 1.5" w.g. Model LF_BC: Belt Drive Model LF_VSR-C: Direct Drive ECCO Supply

4 COMMERCIAL CENTRIFUGAL FANS (cont d) MUFFAN (FS) SIDE INTAKE CENTRIFUGAL FANS, FILTERED SUPPLY Designed for roof mounted installations in low to medium pressure applications. Ideally suited to provide filtered fresh air for kitchen areas to meet applicable NFPA96 code, as well as general applications such as auditoriums, offices, churches, dormitories, and factories. Roof-mount filtered supply Capacity: from ,426 cfm; 0 1.0" w.g. Model FS_B: Side Flow Muffan MUFFAN (MU) MAKE-UP FILTERED FRESH AIR SUPPLY CENTRIFUGAL FANS For commercial and industrial use. Replaces foul or contaminated air that is removed by a building s exhaust system. Make-up air is an essential part of safety and building code requirements for commercial kitchens, chemical laboratories, electrical control rooms and where gas equipment is installed. Roof-mount filtered supply Side intake (model FS) Capacity: from ,426 cfm; 0 1.0" w.g. Model MU: Belt Drive Model MU_VR: Direct Drive ZEPHYR (Z) CEILING AND INLINE CENTRIFUGAL FANS Designed and constructed to create a quiet and reliable product. Extensive combinations of wheel sizes and speeds enable the Zephyr to cover a wide range of CFM. All Zephyrs feature acoustically insulated housings, custom designed blower and motor pairings, motor mounted on vibration isolators, and for all but the smallest Z3H duel inlet blowers. Direct drive Ceiling or inline mount Low sound levels Capacity: from 32 3,290 cfm; 0 1.5" w.g. Model Z: Zephyr Ceiling Fan Model TDA: Zephyr Inline Fan Model Z1: Ceiling Fan Model Z14, Z15: Large Capacity Fans Model ZJ1: Zephyr Jr., Low Profile Fan Model ZL1, ZL2: Ceiling Fan with Light Model ZT: Zephyrette, Low Profile Fan ZEPHYR CABINET (ZC, ZCC) SINGLE AND TWIN UNIT CENTRIFUGAL CABINET FANS, BELT DRIVE General purpose duct blowers. These versatile, quiet operating air movers provide economical, convenient and effective ventilation in ducted systems. They are also used extensively in heating and cooling systems. ZC units are sized with space saving in mind and furnished with inlet and outlet connecting flanges and side access panels as standard. Inline duct-mount Capacity (ZC): from 750 6,350 cfm; 0 1.5" w.g Capacity (ZCC): from 1,500 12,700 cfm; 0 1.5" w.g. Model ZC: Single Unit Model ZCC: Twin Unit ECCO Supply

5 COMMERCIAL AXIAL FANS BREEZEWAY (BZW) AXIAL PROPELLER PANEL FANS Designed for wall exhaust and supply mounted installations for various performance applications. Available in a wide range of fabrication styles and performances. Models are BC, P Series, Breezex, BLL, BHM/BHH and BCH. Direct and belt drive Roof mounted downblast Vandal resistant Capacity: 73 7,381 cfm; " w.g. Model BC: Direct Drive, Large Capacity, Cast Aluminum Model BCH: Belt Drive, Heavy Duty, Cast Aluminum Model BHH: Belt Drive, Heavy Duty Model BHM: Belt Drive, Medium Duty Model BLL: Belt Drive, Light Duty Model BX: Reversible Direct Drive, Light Duty Model P-Series: Direct Drive, Light Duty DOMEX AXIAL (DXA) SUPPLY PROPELLER FANS (DAS) AND FLOW EXHAUSTERS (DAE) DAS supply propeller fans provide excellent value for the user, with an attractive silhouette and air efficiency in low and medium pressure applications. DAE flow exhausters are designed for free air or moderate resistances only. Roof-mount, low contour propeller downblast Capacity: up to 2,460 cfm; " w.g. Model DAS: Supply Fan Model DAE: Exhaust Fan HI-EX (HX) VERTICAL DISCHARGE AIR EXHAUSTERS Ideal for spot ventilation of specific problem areas where rapid air removal is necessary or for general plant ventilation. When equipped with Heat and Smoke option this series of fans incorporates features exclusively designed to exhaust heat and smoke in the event of fire. Available in three standard drive arrangements models: HC, HF, and HX. Roof-mount propeller upblast Standard height or low profile UL 793 Heat and Smoke option Capacity: up to 82,481 cfm; 0 1.0" w.g. Model HC: Standard Height, Direct Drive or Belt Drive Model HX: Standard Height, Direct Drive or Belt Drive Model HF: Standard Height, Belt Drive, Steel Model HZ: HiteSaver, Direct or Belt Drive Model HS: HiteSaver, Belt Drive, Steel Model HS_HS: HiteSaver, Belt Drive, Heat and Smoke Option POWERED AIRETTE (AE) EXHAUST OR SUPPLY PROPELLER FAN AXIAL FLOW ROOF VENTILATORS Can be used as an efficient power roof exhauster to remove hot, humid, foul air or can be arranged to supply fresh, cooler outside air. Hooded, roof-mount propeller fans Capacity: up to 72,755 cfm; 0 0.5" w.g. Model AC: Direct Drive or Belt Drive, Cast Aluminum Model AF: Belt Drive, Steel ECCO Supply

6 COMMERCIAL SPECIALTY FANS GRAVITY AIRETTE (AEG) HOODED ROOF GRAVITY VENTILATORS Gravity ventilator intake and relief. Each design complements the silhouette of any building, providing the performance, size selection, and economical advantages required from virtually any design specification. Hooded roof gravity ventilators Galvanized or aluminum construction Capacity: up to 72,000 cfm Model AEGI: Airette Gravity Intake Model AEGR: Airette Gravity Relief GRAVITY VENTILATORS (GRV) TURBINE, PUL-AIR, AND INSUL-AIR FOR GENERAL VENTILATION Turbines are ideal for the general ventilation of factories, farm and agricultural buildings, commercial and public structures and homes. The Pul-Air is a simple device designed to permit an easy outward flow of air with no internal obstructions or moving parts to require maintenance. The Insul-Air is the ideal choice where an extended airshaft is necessary to clear the peak of a roof, for example. It features all the sturdy construction-details of the Pul-Air plus an extended airshaft and an integral flat mounting base. Pul-Air for air exhaust with no moving marts Insul-Air for extended airshaft to clear roof peaks Model HPA: Insul-Air Model PA: Pul-Air Model PT: Turbine PENNHOUSE (PH) ROOF MOUNTED AIR INTAKE OR EXHAUST HOUSING UNITS Suitable for use as gravity ventilators, pressure relief units, fan discharge caps, spillways, fresh air intakes, and sight shields (for aesthetic purposes) for roof mounted equipment. The Silhouette is compatible with the Linea centrifugal exhauster line, maintaining architectural harmony where units of both types are required on the same roof. Gravity air intake or relief Roof-mount architectural tiered hood design Compatible with model Linea (LF) centrifugal exhausters Model PH: height 22" to 77" ROOF CURBS (RC) PREFABRICATED CURBS FOR ROOF MOUNTED VENTILATION EQUIPMENT Prefabricated curbs offer many advantages over field built curbs for roof mounted ventilating equipment. By using PennBarry curbs with PennBarry fans and vents you are assured a proper fit with PennBarry roof mounted equipment. Model SA: Sound-flat, aluminum Model SG: Sound-Flat, Steel Model SCA: Sound-Cant, Aluminum Model SCG: Sound-Cant, Steel Model SFA: Self Flashing, Aluminum Model SFG: Self Flashing, Steel Model SRA: Sound-RC, Aluminum Model SRG: Sound-RC, Steel Model UA: Flat, Aluminum Model UG: Flat, Steel Model UCA: Cant, Aluminum Model UCG: Cant, Steel Model URA: Raised Cant, Aluminum Model URG: Raised Cant, Steel Model UVG: Vented, Steel ECCO Supply

7 COMMERCIAL SPECIALTY FANS (cont d) WEATHER CAPS (WC) PRESSURE RELIEF VENTILATORS Used as pressure relief ventilators, discharge caps at the end of ductwork, or outside air inlet hoods. Their aerodynamic design and large diameter caps minimize pressure drops and air noise. Two available models: WCF (weather cap flat) and WCC (weather cap curb). Low silhouette, spun aluminum design Capacity: up to 20,065 cfm Model WCC: Weather Cap (Curb) Model WCF: Weather Cap (Flat) INDUSTRIAL CENTRIFUGAL FANS EFFICIENT SILENT INLINER (ESI) MIXED FLOW, INLINE FANS A revolution in the fan industry. The patented design combines the compact, high volume advantages of axial fans with the low sound and high efficiency of tubular centrifugal fans. The outstanding air and sound performance set it apart from the competition, and its versatility allows it to compete with any vaneaxial, mixed flow, or tubular centrifugal fan. Class I, II heavy-gauge steel, mixed flow inline fan Patented wheel design Capacity: from 1, ,000 cfm; 0 7.0" w.g. UNHOUSED CENTRIFUGAL FANS (ESP) A revolutionary unhoused centrifugal fan designed for air handling applications. The fan pressurizes the plenum in which the fan operates and allows for ductwork to be directly connected to the plenum walls of the air handling unit. The plenum fan design saves space by eliminating the fan housing that can detract from system performance along with costly duct transitions. Plenum systems also work especially well with retrofit projects where limited space is a common problem. Class I, II, III heavy-gauge steel construction Unhoused centrifugal fan High efficiency airfoil (plenum only) and backward inclined wheels INDUSTRACON (IND) INDUSTRIAL EXHAUSTERS Designed and constructed for materials and air handling applications. Three specifically designed wheels are available to handle granular material, fibrous material and air with light concentrations of abrasive materials. Heat packages up to 1000 F and spark-resistant construction are just some of the options available. Heavy-duty, high pressure construction Free standing SWSI industrial fan 3 Wheel types: general, fibrous material handling, and air handling ECCO Supply

8 INDUSTRIAL CENTRIFUGAL FANS (cont d) TUBULAR CENTRIFUGAL INLINE FANS (TUB), AIRFOIL AND BACKWARD INCLINED Inline centrifugals, or Tubular fans, are the most practical fans for many applications. Straightline airflow through the fan eliminates unnecessary duct elbows. In addition, vertically mounted units and ceiling hung fans save valuable floor space. Tubular centrifugal inline fan Class I, II, III heavy-gauge steel construction Backward inclined and airfoil wheels Horizontal or vertical mount Capacity: from 49 46,640 cfm; 0 10" w.g Capacity: up to 60,000 cfm; " w.g. FREE STANDING FANS (VCR) The high volume capacities of the VCR backward inclined and VCR airfoil centrifugal fans make them excellent for use in hotels, office buildings, manufacturing plants and hospitals. Variable inlet vanes and discharge dampers make it easy to adjust the airflow for the greatest comfort and efficiency. They are heavy-duty and can handle a variety of atmospheric conditions including fumes, abrasives, and high temperatures, and are suited for industrial process applications in industries as diverse as paper, automotive and textiles. Because of their high efficiencies and low sound power levels, these fans are recommended for clean air and lower temperatures only. A wide range of accessories is available to expand the versatility of both fans. Class I, II, III, IV construction Free standing SWSI/DWDI centrifugal fan Backward inclined and airfoil wheels Capacity: up to 264,000 cfm; " w.g. VERSAPLUG (VSP) CENTRIFUGAL PLUG FANS Space-saving design usually needs no connecting duct work. The motor and drive assemblies are mounted on a sturdy base and directly fastened to the plenum wall, eliminating the need for extra support pedestals. The shaft goes through the wall and drives the fan wheel to circulate air in the plenum. These versatile units are designed to become an integral part of ovens, spray booths, HVAC or other equipment. Class I, II, III heavy-gauge steel construction Unhoused centrifugal fan High efficiency airfoil (plenum only) and backward inclined wheels ECCO Supply

9 INDUSTRIAL AXIAL FANS HOODED ROOF FANS (HRD, HRB, HRR, HTB), DIRECT DRIVE AND BELT DRIVE Used to move large volumes of air efficiently, quietly, and with low discharge velocities. They combine venturi design with the latest developments in T-hood construction for long, trouble-free service under difficult weather or outside vibration conditions. Watertight, overlapping seams and heavy gauge materials insure against leakage. Designed for aerodynamic efficiency, they employ a choice of two propeller types: high speed, cast aluminum and slow speed, fabricated steel. Available in direct drive and belt drive models, they serve supply, exhaust, reversible, gravity-vent, and filtered air applications. Heavy-duty construction Hooded roof-mount propeller fan Capacity: up to 72,755 cfm; 0 0.5" w.g. Model HRB: Belt Drive, Motor and Drive in Airstream Model HRR: Belt Drive, Motor and Drive Out of Airstream Model HTB: Belt Drive, Large T-Hood Model HRD: Direct Drive PANEL FAN (PN) WALL MOUNTED PROPELLER FANS, DIRECT DRIVE AND BELT DRIVE High efficiency, incorporating deep-spun inlet scrolls to minimize losses due to fan inlet conditions. Rugged construction insures long life even in the severest industrial applications. Capable of moving large volumes of air quickly, and suitable for industrial plants, power generating stations and commercial applications, as well as special applications such as parking garages, mine ventilation, heat exchangers, and drying installations. Heavy-duty construction Wall-mount propeller fan Capacity: up to 323,000 cfm; 0 1.8" w.g Capacity: up to 264,000 cfm; " w.g. Model PNB: Belt Drive Model MBP: Belt Drive, Slow Speed Model PND: Direct Drive TUBEAXIAL (TXD, TXB) FAN, DIRECT DRIVE AND BELT DRIVE Designed for use in low to medium pressure ducted applications, and generally used for removing contaminated air or hot air found in industrial applications. They can also be used to supply air through duct work for cooling or pressurizing interior spaces. Tubeaxial fans are very versatile and compact units that move large volumes of air in duct systems having relatively low pressure losses. Horizontal or vertical mount Low to medium pressure ducted applications Capacity: up to 150,000 cfm; 0 2.5" w.g Model TXB-091: Belt Drive, Six-blade Propeller Model TXB-097: Belt Drive, Slow Speed Propeller Model TXB-098: Belt Drive, Tubeaxial Propeller Model TXD-091: Direct Drive, Six-blade Propeller Model TXD-097: Direct Drive, Slow Speed Propeller Model TXD-098: Direct Drive, Tubeaxial Propeller ECCO Supply

10 INDUSTRIAL AXIAL FANS (cont d) UPBLAST ROOF FANS (ULD, ULB, UTD, UTB), DIRECT DRIVE AND BELT DRIVE Rugged and trouble-free, offering the latest axial-type design for quiet and efficient air handling, combined with the advanced engineering of the upblast stackhead for immediate dispersal of all exhaust air high above the building. This prevents re-entry of exhaust fumes through adjacent windows or air intake ducts. Gravity-closing automatic dampers close tight when the unit is off. Heavy-duty construction Roof-mount propeller upblast Standard height or low profile Capacity: up to 82,481 cfm; 0 1.0" w.g. Model ULB: Low Silhouette, Belt Drive Model ULD: Low Silhouette, Direct Drive Model UTB: Belt Drive Model UTD: Direct Drive VANEAXIAL (VXD, VXB) HEAVY DUTY VANEAXIAL FANS, DIRECT DRIVE OR BELT DRIVE The perfect choice when high volume, compact size, superior quality and long lasting fans are needed. These AMCA licensed products are among the quietest and most efficient axial fans. They use industry standard foot mounted motors, while most competitor's motors require special shafts and C face mounting. These standard motors are readily available and less expensive to replace if needed. Horizontal or vertical mount High pressure ducted applications Capacity: up to 120,000 cfm; 0 7.0" w.g. Model VXB: Belt Drive Model VXD: Direct Drive INDUSTRIAL SPECIALTY FANS BIFURCATOR FANS (AXD, AXB) AXCENTRIX, DIRECT DRIVE AND BELT DRIVE Inline, mixed flow blowers designed specifically to move large volumes of air against high static pressures. Because of their bifurcator housings, they can exhaust hot air, corrosive gases or flammable fumes. The motor is isolated from destructive heat and fumes in a separate chamber, so it remains cool and clean even after extended operation. The only moving part exposed to heat and fumes is the specially designed fan wheel. Single or two stage, axial or axcentrix Vertical roof or inline-mount Heavy gauge steel and continuous welding Capacity: from ,000 cfm; 0 3.0" w.g. Model AXB: Belt Drive Model AXD: Direct Drive ECCO Supply

11 INDUSTRIAL SPECIALTY FANS (cont d) BIFURCATOR FANS (SSB, TSB), SINGLE OR TWO STAGE Engineered and built to last. Standard construction offers minimum maintenance direct drive design with motor out of air stream. Built of heavy gauge steel throughout, with top name brand electric motors and continuous welding of seams and use of angle iron inlet and outlet flanges. Special attention is given to the in-line air flow characteristics to provide minimum internal restriction. The result is superior performance, with minimum downtime for maintenance and exceptional full-life value. Single or two stage, axial or axcentrix Vertical roof or inline-mount Heavy gauge steel and continuous welding Capacity: from ,000 cfm; 0 3.0" w.g. Model SSB: Single Stage Model TSB: Two Stage FUME EXHAUST (FH, FHL) CURB MOUNTED, CENTRIFUGAL FANS Designed to meet the various requirements for fume exhaust systems. The exclusive discharge venturi design allows the selection of the discharge velocity to meet the code requirements for high velocity discharge to atmosphere. Discharge velocities from 1250 FPM to 4000 FPM can be obtained by fan selection as required for the particular application. To obtain the required discharge velocity it is necessary to accelerate the air flow from the fan outlet velocity up to the required discharge velocity. Some static pressure will be required to accelerate the air which will need to be added to the system pressure requirements in order to determine the fan performance requirements. FH Series fans accomplish the required acceleration with a minimum pressure loss. Single or two stage, axial or axcentrix Vertical roof or inline-mount Heavy gauge steel and continuous welding Capacity: from ,000 cfm; 0 3.0" w.g. Model FH: Standard Height Model FHL: Low Height HYBLAST (HY) HIGH VELOCITY FUME EXHAUST, DIRECT DRIVE AND BELT DRIVE Designed to meet and exceed requirements for exhausting unwanted fumes from laboratory hoods or industrial processes. These unique air handling models remove the contaminants up and away from the facility by vertically exhausting the fumes using high fan outlet velocity. or direct drive Roof-mount upblast Plenum mounting of multiple fans (redundant fan system) Capacity: from 2,850 54,960 cfm; 0 8.5" w.g. ECCO Supply

12 KITCHEN HOOD (PBKH) PENNBARRY COMMERCIAL AND LIGHT Combining form with function to meet the demands of commercial kitchens in a variety of styles, including exhaust, exhaust with internal makeup air, self-compensating, low profile, or vapor only hoods. Featuring a fully welded 18 gauge 304 stainless steel finished with a #3 polish standard construction, all hoods are attractive while offering excellent resistance to oxidation and food preparation environments. 304 or 430 stainless steel construction UL / ETL and NSF listings Fully welded seams (no caulk) Motor controls / energy management system Model PBEC: Exhaust Only Canopy Hood Model PBF: Exhaust with Internal Makeup Air Model PBSC: Self Compensating Model PBLPE: Low Profile Model PBVH: Type II, Vapor or Heat Only Rated MAKE-UP AIR INDIRECT-FIRED MAKE-UP AIR SYSTEM (IDF) Indirect-fired technologies meet specific customer preferences and are common choices for many commercial, institutional and industrial applications in which the higher capacities, displacement ventilation and fuel efficiency of direct-fired systems are not required. Gravity and power venting Horizontal arrangement for indoor and outdoor Aluminized steel heat exchanger and burner Capacity: 75 1,200 mbh; ,800 cfm DIRECT-FIRED MAKE-UP AIR SYSTEMS (SDF) Widely used in kitchen and food-service operations to replace stale or foul exhaust air with fresh and clean outside air, they offer unsurpassed economy, application versatility, low-maintenance durability, and exceptional product support. Galvanized steel or aluminum cabinet construction Stainless steel heat mixing plates and cast aluminum manifold Options for cooling, filters, and controls Capacity: up to 14,000 cfm and 1,500 mbh ETL Listed ECCO Supply