PRODUCT CATALOG SURFACE PUMPS RESIDENTIAL & LIGHT COMMERCIAL. franklinwater.com

Transcription

1 PRODUCT CATALOG SURFACE PUMPS RESIDENTIAL & LIGHT COMMERCIAL franklinwater.com

2

3 PACKAGED SYSTEMS Inline Controls... 2 FLW...3 SWC & SWP...4 ADJ...5 CTL 6 Inline Pressure Boosting... 7 Inline Inline Constant Pressure...10 Inline For the most up-to-date product information, visit franklinwater.com.

4 INLINE CONTROLS Franklin Electric s new Inline Controls include five pump starting and control devices that pair with a variety of submersible or surface pump up to 20 amps (or approximately 3 hp) to provide or boost the system s overall water pressure and in many cases, without the need of an additional bladder tank. Depending on application requirements and selected model, the product family offers various forms of system protection, including dry run, dead head pumping, over amperage, locked system, and over pressurization. They also offer two unique features that ensure the system remains functional and hassle free, including: a daily motor rotation start designed to energize the motor at least once every 24 hours to prevent system locking, and a unique automatic restart feature eliminating the need to manually restart the pump in the case of an unexpected trip or fault. FEATURES BY MODEL FLW SWC SWP ADJ CTL CLASSIFIED BY UL TO NSF/ANSI 372 Model Description Flow Based Pump Run Dry Protection Backup Activation Switch and Tank Gauge Backup Activation Regulation Low-Pressure Replaces Pressure Includes Pressure Adjustable Low-Pressure Max. Pressure Suction Lift Activation Inline FLW InlineSWC InlineSWP InlineADJ 115 V InlineADJ 230 V InlineCTL NOTE: Proper pump selection is essential for use with the Inline FLW, SWC, SWP, and ADJ as pump shut-off pressure will be realized within the system prior to shut down. If the pump size can not be reduced, select the Inline CTL with built-in pressure reducing valve. TECHNICAL SPECIFICATIONS Model Description Motor Size Voltage Max. Current Max. Temp. Min. Flow (GPM) Thread Size InlineFLW up to 1.5 hp up to 1.1 kw 115/ A 150 F " MNPT InlineSWC up to 2 hp up to 1.5 kw 115/ A 150 F " MNPT InlineSWP up to 3 hp up to 2.2 kw 115/ A 150 F /4" MNPT InlineADJ 115 V up to 0.75 hp up to 0.55 kw A 150 F " MNPT InlineADJ 230 V up to 2 hp up to 1.5 kw A 150 F " MNPT InlineCTL up to 3 hp up to 2.2 kw 115/ A 150 F /4" MNPT 2

5 INLINE CONTROLS - FLW Use with a pressurized water supply such as an elevated tank or a municipal/utility source. The Inline Control FLW is a smart flow activated pump start control, designed for use in conjunction with a pump where starting and stopping the system based on water usage is desired. FEATURES With flow of 0.15 gpm or greater the pump is activated to ensure continuous operation during water demand cycles Can be wired for 115V or 230V with no internal settings or wiring changes required Protects pump from conditions of dry run and pumping against a closed discharge (dead-head) by powering off the system when water flow stops If the pump remains idle for 24 consecutive hours, the device will carry out an autorun feature to keep the system free of debris and clogs Replaces the need for an external pressure tank and differential pressure switch Flow Based Pump Run Dry Low-Pressure Replaces Pressure Includes Pressure Adjustable Low-Pressure Max. Pressure Model Description Suction Lift Activation Protection Backup Activation Switch and Tank Gauge Backup Activation Regulation Inline FLW NOTE: Proper pump selection is essential for use with the Inline FLW as pump shut-off pressure will be realized within the system prior to shut down. If the pump size cannot be reduced to a lower output performance within the systems pressure limits, select the Inline CTL with built-in pressure reducing valve. ORDERING INFORMATION Model Description Order No. Model No. Motor Size Voltage Max. Current Max. Temp. Thread Size InlineFLW FIL-FLW hp ( kw) 115/ A 150 F 1" MNPT 3

6 INLINE CONTROLS - SWC & SWP Use with a pressurized water supply or suction lift installation for municipal and well supply sources. The Inline Control SWC and SWP are flow activated smart pump start controls, designed for use in conjunction with a pump where starting and stopping the system based on water usage is desired. FEATURES With flow of 0.25 gpm or greater the pump is activated to ensure continuous operation during water demand cycles When flow is less than 0.25 gpm, the pump starts at a minimum pressure of 22 psi If the pump starts due to low system pressure, with no additional demand, the Inline SWC and SWP will only run the system to rebuild pressure Can be wired for 115V or 230V with no internal settings or wiring changes required Includes a convenient built-in check valve Protects pump from conditions of dry run, overcurrent, and pumping against a closed discharge (dead-head) by powering off the system when water flow stops If the pump remains idle for 24 consecutive hours, the device will carry out an autorun feature to keep the system free of debris and clogs The system will auto-rest up to 10 times in a 24 hour period if no water is detected, to protect the pump Replaces the need for an external pressure tank and differential pressure switch SWC SWP Model Description Flow Based Pump Run Dry Low Pressure Replaces Pressure Includes Pressure Adjustable Low-Pressure Max. Pressure Suction Lift Activation Protection Backup Activation Switch and Tank Gauge Backup Activation Regulation InlineSWC InlineSWP NOTE: Proper pump selection is essential for use with the Inline SWC and SWP as pump shut-off pressure will be realized within the system prior to stopping the pump. If the pump size cannot be reduced to a lower output performance within the systems pressure limits, select the Inline CTL with built-in pressure reducing valve. ORDERING INFORMATION Model Description Order No. Model No. Motor Size Voltage Max. Current Max. Temp. Thread Size InlineSWC FIL-SWC hp ( kw) 115/ A 150 F 1" MNPT InlineSWP FIL-SWP hp ( kw) 115/ A 150 F 1 1/4" MNPT FIL-SWC16 FIL-SWC20 4

7 INLINE CONTROLS - ADJ Use with a pressurized water supply or suction lift installation for municipal and well supply sources. The Inline Control ADJ is a smart flow activated pump start control, designed for use in conjunction with a pump where starting and stopping the system based on water usage is desired. With water flow being the primary system start command, the unit provides a backup low pressure cut-in point where the pump will start to repressurize the system. The InlineADJ allows this low pressure cut to be adjusted to 22, 29, or 36 PSI to ensure the system will still reach the desired shut-off pressure. FEATURES With flow of 0.25 gpm or greater the pump is activated to ensure continuous operation during water demand cycles When flow is less than 025 gpm, the user may select between three adjustable cut-in points for a minimum system pressure of 22, 29, or 36 psi If the pump starts due to low system pressure, with no additional demand, the Inline ADJ will only run the system to rebuild pressure Separate models for 115V or 230V with no internal settings or wiring changes required Includes a convenient built-in check valve Protects pump from conditions of dry run, overcurrent, and pumping against a closed discharge (dead-head) by powering off the system when water flow stops If the pump remains idle for 24 consecutive hours, the device will carry out an autorun feature to keep the system free of debris and clogs. The system will auto-rest up to 10 times in a 24 hour period if no water is detected, to protect the pump Replaces the need for an external pressure tank and differential pressure switch Model Description Flow Based Pump Run Dry Low-Pressure Replaces Pressure Includes Pressure Adjustable Low-Pressure Max. Pressure Suction Lift Activation Protection Backup Activation Switch and Tank Gauge Backup Activation Regulation InlineADJ 115 V InlineADJ 230 V NOTE: Proper pump selection is essential for use with the Inline ADJ as pump shut-off pressure will be realized within the system prior to shut down. If the pump size cannot be reduced to a lower output performance within the systems pressure limits, select the Inline CTL with built-in pressure reducing valve. ORDERING INFORMATION Model Description Order No. Model No. Motor Size Voltage Max. Current Max. Temp. Thread Size InlineADJ 115 V FIL-ADJ16-1G 0.75 hp (0.55 kw) A 150 F 1" MNPT InlineADJ 230 V FIL-ADJ16-2G 2hp (1.5 kw) A 150 F 1" MNPT FIL-ADJ16-1G and FIL-ADJ16-2G 5

8 INLINE CONTROLS - CTL Use with a pressurized water supply or suction lift installation for municipal and well supply sources. The Inline Control CTL is a smart flow activated pump start control, designed for use in conjunction with a pump where starting and stopping the system based on water usage is desired. By turning the dial on the back of the unit the maximum system pressure may be regulated within the pump s output range to match the application s need. FEATURES With flow of 0.25 gpm or greater the pump is activated to ensure continuous operation during water demand cycles Built-in pressure reducing valve to allow for customization of maximum output pressure Can be wired for 115V or 230V with no internal settings or wiring changes required If the pump starts due to low system pressure, with no additional demand, the Inline SWC and SWP will only run the system to rebuild pressure Protects pump from conditions of dry run, over pressure, and pumping against a closed discharge (dead-head) by powering off the system when water flow stops If the pump remains idle for 24 consecutive hours, the device will carry out an autorun feature to keep the system free of debris and clogs Replaces the need for an external pressure tank and differential pressure switch Includes a convenient built-in check valve Adjust knob to set the pump s maximum output pressure at a desired regulation point to prevent system over-pressurization Flow Based Pump Run Dry Low-Pressure Replaces Pressure Includes Pressure Adjustable Low-Pressure Max. Pressure Model Description Suction Lift Activation Protection Backup Activation Switch and Tank Gauge Backup Activation Regulation InlineCTL ORDERING INFORMATION Model Description Order No. Model No. Motor Size Voltage Max. Current Max. Temp. Thread Size InlineCTL FIL-CTL hp ( kw) 115/ A 150 F 1 1/4" MNPT FIL-CTL20 6

9 INLINE PRESSURE BOOSTING - INLINE 400 FEATURES Utilizes proven Franklin Electric pump and motor to create the most trustworthy product on the market Simple flow-based controls mean you get the pressure every time you need it Protective cap comes standard for outdoor use (for vertical applications only) Whisper-quiet operation Installs vertically or horizontally 1-1/4" NPT inlet and outlet 115 V and 230 V models available Plug-in electrical cord connected unit Protective features: Over/Under voltage protection, dry run, and over temperature Product power rating: 1/3 hp, kw Maximum Water Temperature: 120 F/49 C APPLICATIONS City water pressure boosting Pressurize water from cistern tank Re-pressurizing after filtration Irrigation system boosting ORDERING INFORMATION Model Description Order No. HP Input Voltage Inline V /3 115 V Inline V w/ tank 115 V /3 115 V Inline V /3 230 V Inline V w/ tank 230 V /3 230 V REPLACEMENT PARTS & KITS Model Description Order No. Tank Wrench Inlet Pressure Switch Outlet Pressure Switch Replacement Tank Replacement Cover Replacement Base Motor Capacitor V Motor Capacitor V Power Cord V Power Cord V Flow Piston Kit Tank O-ring Outdoor Protective Cap Kit Expansion Tank, 2 Liter, 1" MNPT Connection Protective Cap 7

10 INLINE PRESSURE BOOSTING - INLINE 400 PERFORMANCE METERS FEET PSI INCREMENTAL PRESSURE INCREASE GPM L/MIN M 3 /H FLOW 8

11 8.86 [225] 1.77 [45] [146] [90] INLINE PRESSURE BOOSTING - INLINE [35] DIMENSIONS 0.98 [25] 8.86 [225] 4.61 [117] [444] [752] 9.21 [234] 7.64 [194] 8.86 [225] 3.74 [95] 3.74 [95] 7.64 [194] 1.77 [45] 8.86 [225] 5.75 [146] 3.54 [90] [444] 4.61 [117] 1.38 [35] 0.98 [25] 8.50 [216] [752] 9.21 [234] 3.74 [95] 8.86 [225] 4.61 [117] TYPICAL INSTALLATION 8.50 [216] Water Supply To House Ball Valve Check Valve 5 feet or less Power Pressure Tank Pressure Reducing Valve (optional) Pressure Gauge Inline Pressure Boosting System Pressure Relief Valve Pressure Gauge Ball Valve Ball Valve Union Coupling Flow Union Coupling Pressure Reducing Valve (Optional) (Discharge into drain rated for max pump output at relief pressure) Allow a minimum of 20 inches (51 cm) for maintenance access *It is recommended (where applicable) to install the Inline 400 pump in PARALLEL with the incoming water supply. This will allow for a service bypass so that the typical household can still utilize the incoming water (albeit at a reduced pressure) if maintenance work is required. This type of installation requires a ball valve be installed as shown above. 9

12 INLINE CONSTANT PRESSURE - INLINE 1100 The Inline 1100 provides constant pressure for both private wells and municipal/city water systems. FEATURES Pump, motor, drive, and pressure switch in one box as a packaged system Small and compact design fits into small areas, even between floor joists Stainless steel construction for years of operation Simple and easy installation with step-by-step illustrated instructions Integrated motor design allows water to flow around it for quiet and cool operation NEMA 4 (IP56) electronics enclosure Multiple mounting configurations allow for the unit to be installed where you need it, whether horizontal, vertical, or even upside down Built-in system protections guard against many common failure modes including surge protection, voltage underload, locked pump, open circuit, short circuit, and overheated controller Product power rating: 1.2 hp, 0.9 kw Shipping weight: 50 lbs, 22.7 kg APPLICATIONS Boosted and constant water pressure from water storage/cistern systems Homes (both private and municipal applications) General pressure boosting Sprinkler systems Farming and commercial wash down systems CSA 108 UL 778 NSF/ANSI 372 ORDERING INFORMATION Model Description Order No. Input Voltage Input Phase 25SDIL1100N4* (Complete pump w/npt) SDIL1100N4-B* (Complete pump w/bsp) Electronic Drive Assembly Single Pump & Motor Assembly w/npt Pump & Motor Assembly w/bsp Mounting Feet Pressure Switch Pressure Tank (2 gallon) Fastener Kit Pressure Switch Cable N/A N/A Overpressure Switch** Overpressure Switch Cable** Overpressure Switch & Cable Combo** Thermostat Kit * Includes pump, motor, drive, pressure switch, and all cables. ** Overpressure switch is sold as an accessory and is not required for normal operation. 10

13 INLINE CONSTANT PRESSURE - INLINE 1100 PERFORMANCE METERS FEET PSI INCREMENTAL PRESSURE INCREASE RECOMMENDED OPERATING RANGE GPM L/MIN M 3 /H FLOW NOTE: Running outside of Recommended Operating Range for short periods of time is permissible. SYSTEM COMPONENTS Water Flow NEMA 4 (IP56) Drive Thermostat Secure Power Cord 1-1/4" NPT Inlet 1-1/4" NPT Outlet Stainless Steel Impellers Sealed Motor 11

14 INLINE CONSTANT PRESSURE - INLINE 1100 DIMENSIONS [478,7] TO THERMOSTAT [478,5] 1.50 [38,1] SUCTION SEE TABLE FOR SIZE DISCHARGE SEE TABLE FOR SIZE 9.31 [236,4] 6.65 [168,9] INPUT POWER [439,9] [265] 8.00 [203,2] 7.00 [177,8] 5.72 [145,2] 2.92 [74,1] 3.45 [87,7] TYPICAL INSTALLATION 5 FEET OR LESS WATER SUPPLY INLINE SYSTEM POWER 2 GALLON TANK PRESSURE SWITCH PRESSURE RELIEF VALVE PRESSURE GAUGE BALL VALVE TO HOME *CHECK VALVE OPTIONAL BYPASS BALL VALVE UNION COUPLING FLOW UNION COUPLING CHECK VALVE PRESSURE SHUT-OFF SWITCH (OPTIONAL) (DISCHARGE INTO DRAIN RATED FOR MAX PUMP OUTPUT AT RELIEF PRESSURE) BALL VALVE CHECK VALVE NOTE: These optional components are shown in a typical installation diagram. They should be used at the installer s discretion as required for particular applications. * When connected to a municipal system, if the plumbing does not have a backflow prevention device, a check valve is required on the incoming water supply line. If installed on a cistern, the check valve should be passive or be eliminated. 12

15

16 franklinwater.com M5049a 03-18