Hot-air generator. Final edition of Electric hot-air generator!! Catalog No. 4 TAKETSUNA MANUFACTORY CO., LTD. Hot-air generator.

Size: px

Start display at page:

Download "Hot-air generator. Final edition of Electric hot-air generator!! Catalog No. 4 TAKETSUNA MANUFACTORY CO., LTD. Hot-air generator."

Stella Heath
5 years ago
Views:

1 Final edition of Electric hot-air generator!! Hot-air generator Catalog No. 4 The 12th TAKETSUNA MANUFACTORY CO., LTD Utility model patent designs acquisition completion Hot-air generator

Hot-air generator Comfortable operability and high quality Industrial devices are demanded that they can operate easily, high quality, and durability.

This time, Furthermore, devices function were improved. Necessary information was displayed as it can tell just by looking and legibility of the control panel was high.

2 Hot-air generator Comfortable operability and high quality Industrial devices are demanded that they can operate easily, high quality, and durability. Electric TSK hot-air generator is trusted by the production experiences for 50 several years and the sales method that guarantee period is 3 years. This time, Furthermore, devices function were improved. Necessary information was displayed as it can tell just by looking and legibility of the control panel was high. Easy operation, clear display, and handy size. Display of the blower rotation speed Hz that contributes to energy conservation operation. Mode switch was added. Structure that can be fixed Demi-filter and CR-filter easily. High efficiency (Utility model patent designs acquisition completion) Cordierite heat-resistant material that insulation charecteristic is excellent is produced to the honeycomd type that pressure loss is very few. And the nichrome wire is incorporated in the center, the heat of the nichrome wire becomes a hot-air about 100% by the gas can be passed on the inside and outside of the nichrome wire of coil state. So, this is the heater for generating hot-air of an ideal. Humidity of the hot-air that does the discharge becomes near 0%. Because electricity is being used for the heat source. And, by the complete hot-air, this casn use for the drying of food and medicine. Saving energy design For saving energy, the heatproof blower of the hot-air circulation specification is installed standard to all the machine types to use the hot-air again. Electricity charges is able to be economized on from 50% to 80%. ATTN Please dilute the gas density of suction gas with air to from 1/50 to 1/100 or less of explosion minimun density in the case that toluene, thinner, plentiful vapor are included to suction gas at the time of hot-air circulation. Or, please use the TSK heat exchanger HEX series without doing the hot-air circulation. Inverter installation Gas capacity use limit of the blower was gone by the adoption of the inverter. And, usable gas capacity range spread substantially. Furthermore, the performance of the blower is demonstrated to the highest without influencing power supply specification even in 50Hz areas, and Gas capacity can be adjusted to the unstage and delicately. At the time of the gas capacity adjustment, the loss of the blower decreases considerably in comparison with the damper method, and the saving energy operation is possible effectively. Earthquake resistance (Design standard) There is not abnormal resonance when the vibration frequency is 20-30Hz, and the cycle is 1 min/cycle. There is not an abnormal action during the test and after the test when the vibration frequency is 33Hz, andvibration acceleration is each 30min to XYZ direction at 1G. * Earthquake resistance test is adapting the product that the weight is less than 50kg. High efficiency Honeycomb block heater (P.A.T.) Saving energy design Heatproof blower (P.T.A.) Hot-air circulation Max. suction gas temp. 230 C Low noise measure is finished (July, 1993) Suction gas max. temp. of TSK-18 is 140 C, TSK-121 is 170 C. Heater does not breaking of wire and can use semipermanently. This can be produced for 365 days night and day continuation operation because this is performing a sufficient safe measure. This can be used just connecting the power cord. Heater case is using the alster stee1 board of the heatproof type without rust. And, becoming stubborn structure durability increased further. * Thermocouple [K] was adopted to the each safe sensor of the overheat sensor, outlet temp. upper limit sensor, and inlet temp. upper limit sensor in addition to the outlet temp. sensor thermocouple [K]. So, high safety was secured. (Industry first) This is the structure that considered the inclusion to the automation machine, conveyor, and drying oven etc. to the maximum. (Example) Direction change of the hot-air outlet and blower inlet, remote control terminal from the outside, input terminal of the external sensor, service terminal (Output signal of operation, blower warning, temperature warning, and overheat), timer operation, remote controller, filter with the silencer, protection cover, different voltage specification, and change of heater capacity. Option part is being prepared abundantly as we can respond to various user needs.

switch Blow switch On timer switch Off timer switch External operation switch PV temp. display SV temp. display Air volume control display Temp. alarm External temp. control Overheat Temp.

3 Condensation of highly efficient (Standard equipment) Stop switch Heater Timer setting display All the switch and are lighted for the catalog. Equipment Standard, Option parts, Orders (Factory equipment), Setting no Remote controller Model Installation type to the hot-air generator Demi-filter Independence type Demi-filter CR-filter Hot-air switch Blow switch On timer switch Off timer switch External operation switch PV temp. display SV temp. display Air volume control display Temp. alarm External temp. control Overheat Temp. warning B lower warning Test button Mode switch Service terminal Input terminal of the external sensor Terminal for the remote operation Remote operation switch S, T S S T T T T T T Adiabatic cover (For the heatproof blower) Auto-damper drive circuit TSK Heat exchanger HEX-series Change to B type of without controller Different voltage spec. 3-phase 380V, 400V, 415V, 440V HEPA filter Setting to the outlet Heatproof temp. 250 C Please refer to the catalog No.4-1. pcs. pcs. pcs. Attention 1 : Adiabatic cover for TSK-92, 102 are equiped at our factory. ) Remote controller Guard bar Remote controller that was established to the place where parted from the control panel of the main body can be operated simultaneously. Control panel cover (Acrylic) Cable c Remote cable 10m Remote cable 10m Remote controller model Matching type Remote cable Weight (includ cable) Outline measure Width 225 * Height 225 * Length 50 (mm) R emote controller and the control panel of the main body can be operated simultaneously. Entrance of the wire direction of remote cable can bechange to the Characteristic surface or side face. (At the time of shipment : Under face) R emote controller can be established to the far place. (With the fixation metal fittings) T his can be implanted to the other controller. (With the screw) T his is attached after buying the standard type of the hot-air generator. Accessories Fixation metal fittings for the setting (4 pcs. Screw for implanting to the controller (M4 * 10 Screw 4 pcs.) Rubber bushing (For the stoppage of the hole for the entrance of wire) *1 Please consult in the advance in the case that the remote cable more than 11m. *2Protrusion things of the screw, guard bar, and control panel cover are not included.

Highly efficient For hot-air circulation Demi-filter During the registration of designs and patent application Please fix Demi-filter without fail when the hot-air generator is used.

condition which piping is fixed. with Drain cap Installation type to the hot-air generator Demi-filter.

4 Highly efficient For hot-air circulation Demi-filter During the registration of designs and patent application Please fix Demi-filter without fail when the hot-air generator is used. Discard filter cartridge Fixation metal fittings Band Shell Heatproof 230 C Air including the mist such as oil Demi-filter standard equipment Band Accumulation example Cartridge can be slided in the condition which piping is fixed. with Drain cap Installation type to the hot-air generator Demi-filter...This is the type that is attached directly to the inlet of the hot-air generator Demi-filter Matching hot-air Demi-filter is the filter that can remove oil that exerts bad influence on the Bore A product that heats and hot-air generator etc. Model generator This can cut time and the cost that is required to the maintenance of the hot -air generator substantially. Dispersion wing that was established on suction side of the demi-filter disperses to the cartridge while rotating the air including mist of oil etc. So, this is very efficiency good and low pressure loss. Demister cartridge of standard equipment can regenerate by the washing. This is the energy conservation type that can use repeatedly without the performance falls off. Demi-filter of TSK-92, 102, 121, 52HT, and hj-1.5 is equipped standard. Addition parts...filter can accumulate to 2-3 steps by purchasing the only cartridge. Demister cartridge(op) Specification Discard filter cartridge(op) Discard filter cartridge Filter for exchange (OP) Shell : Material Aluminum Band : Material SS Cartridge frame : Material SUS Demister cartridge : Filter material SUS Discard filter cartridge : Filter material Polyamide Max. use temp. : 230 C Early period pressure loss : About 20-50mmAq Dust collection efficiency : About 45% ( At the time of one way by the demister cartridge) Oil mist Removing more than 75% (By our comoany test) Independence type demi-filter that can use for the blower of marketing is available. Attachment is necessary to attach to the hot-air generator that was purchased before December 17, Matching demi-filter Maintenance cycle becomes long because the collection dust quantity goes up by accumulating the cartridge of the addition parts. Please use it after the discard filter cartridge of the addition parts accumulates in the front of the demister cartridge in the case that dust is included a lot to the air that the hot-air generator sucks....please refer to the accumulation example. Band of 1pc. is belonged to demister cartridge and discard filter cartridge of the addition parts. Demister cartridge (OP) of F-91S and F-120S can not use by accumulating. Please refer to option parts total catalog for details. Highly efficient For One way (Heatproof 80 C) CR-Filter During the registration of designs and patent application Please fix CR-filter without fail when the hot-air generator is used at one way. Heatproof 80 C Dust more than about 3micron can be colleced. Model Matching hot-air generator Spare filter This is plugging type. Attachment is necessary to attach to the hot-air generator that was purchased before December 17, Independence type stand for CR-filter is available. Element material of the filter : Material Polyester Heatproof 80ßC (For One way) This can use once again by the washing. This is the type that is attached directly to the blower of the hot-air generator. This can be removed easily because this can detach by the band. This can collect dust of more than about 3 micron. CR-55A-120A suck air from the outside circumference and inside circumference of the filter (W-filter type). This is the compact and low pressure loss filter. Please refer to option parts total catalog for details.

Service terminal Connection terminal of the external sensor, input terminal for outside control, and operation and warning terminal are equipped standard.

control External operation ON/OFF External heater ON/OFF Input common Blow Hot-air Temp. warning Temp. alarm Blower warning Overheat Output common Inside relay For temp.

Contact capacity is less than DC30V 1A more than DC5V 10mA. Output common total is less than 3A. (Output by the contact for the unvoltage slight load) Close at warning.

5 Service terminal Connection terminal of the external sensor, input terminal for outside control, and operation and warning terminal are equipped standard. External input and terminal for TSK (K) This conforms in the JIS K thermocouple class Connector for the connection of remote controller Outlet sensor External temp. control External operation ON/OFF External heater ON/OFF Input common Blow Hot-air Temp. warning Temp. alarm Blower warning Overheat Output common Inside relay For temp. controller of SSR drive reverse type. Input voltage DC12V - 24V. Terminal voltage is less than DC12V 3.6mA. (Contact for the unvoltage slight load) On by close. Contact capacity is less than DC30V 1A more than DC5V 10mA. Output common total is less than 3A. (Output by the contact for the unvoltage slight load) Close at warning. External input and terminal for TSK , HJ-1.5 Sheath diameter 3.2 Sheath length (L) 200mm Compensating wire 5m with PT1/8 C.F. Model Adaptable type Hot-air generator is controlled temp. with the sensor that was installed to the outlet. It becomes more effective by using the external sensor to control the temp. inside the oven well accuracy in the case that this uses to drying oven etc. Remote operation switch Cord 6m Terminal upper row Inside relay Blow Hot-air Temp. warning Temp. alarm Blower warning Overheat Output common External operation ON/OFF External heater ON/OFF Input common External temp. control Terminal lower berth Terminal for the connection of remote controller ATTN. : Please do not short-circuit because voltage DC24V has occurred between terminal B9 and B10. Contact capacity is less than DC30V 1A more than DC5V 10mA. Output common total is less than 3A. (Output by the contact for the unvoltage slight load) Close at warning. Terminal voltage is less than DC24V 7mA. (Contact for the unvoltage slight load) On by close. For temp. controller of SSR drive reverse type. Input voltage DC12V - 24V. Stop Blow Hot-air Model Adaptable type Please use in accordance with the reference wiring example after you understood specification sufficiently by the operation manual in the case that the service terminal is used. Adiabatic cover for the heatproof blower (Burn prevention) Economy of about 3% of energy are possible. Model Adaptable type This can not operate by the timer when the remote operation switch is used. T.S.K Heat exchanger Efficiently collection of precious energy!! Problem of 'Be not able to circulate because explosiveness solvent and plentiful vapor are included to exhaust gas' and 'Want to be up capacity a little more' etc. is able to be canceld. Max. usable temp. 210 C Resisting pressure Less than 2.96kPa Adaptable type Auto-damper drive circuit (Two positions type) ( ) TSK Please purchase the auto-damper separately. (Entry to the option parts catalog) Drive circuit that the auto-damper is opened and closed by the action of the hot-air generator is built. (Damper closes when the hot-air generator stopped. With the timer for action opening time adjustment.) Accident that the steam from the washing machine and gas of the dangerous drying oven etc. mixes to the hot-air generator. Model Adaptable type Bore Please refer to the option parts catalog for details.

Hot-air generator. Operation manual (Basis operation) TAKETSUNA MANUFACTORY CO., LTD. Please read this without fail before use.

Hot-air generator. Operation manual (Basis operation) TAKETSUNA MANUFACTORY CO., LTD. Please read this without fail before use. Please send this operation manual to the final customer without fail. Preservation Hot-air generator Operation manual (Basis operation) Please read this without fail before use. This time, thank you very