DESOLDERING PRODUCTS SVS-800AS/580AS/500AS TP-280AS /200AS
|
|
- Blanche Collins
- 6 years ago
- Views:
Transcription
1 DE SERVICE STATIONS AUTOMATIC DE STATIONS PORTABLE DE GUNS DE WICKS DE SUCKERS SVS-8AS/8AS/AS TP-28AS /2AS TP-AS/ CP/CPN series GS series SURFACE-MOUNT / SMT DES HEATED TOOLS 7 7
2 DE SERVICE STATIONS Omnifunctional machine for soldering, desoldering and reworking. SERVICE STATION SVS-8AS ANTI LEAD STATIC FREE INDEPENDENT PUMPS Desoldering and reworking operate simultaneously 4% MORE SUCTION CAPACITY With open-valve mechanism CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs (soldering & desoldering) SUPERIOR TEMPERATURE-CONTROL CIRCUIT To keep the temperature constant during desoldering ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy DES REWORK UNIT The temperature can be set to max C. UNIT Good for a wide range of soldering work with 7 W heater. DE UNIT Instant desoldering with open-valve mechanism. (Please refer to the next page.) INDIVIDUAL POWER SWITCHES Along with the main power switch, there are switches for soldering, desoldering, and reworking. Nozzles sold separately. HEATED TOOLS ST-76 soldering iron stand (included) 72
3 PRODUCT / FUNCTIONS OPEN-VALVE MECHANISM Two-stage trigger switch (PAT.P) Step Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber. Step 2 Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber. Solder Soldering Unit ( ) Tip temp DE UNIT UNIT REWORK UNIT Pull trigger fully Work (Set at 4 C) The open-valve allows the device to reach vacuum pressure of -.6MP (approx.-4 mmhg) in only.second. (about 4 times faster than our SVS- AS). 2 3 Open-valve mechanism 4 (mmhg) chamber Desoldering Unit ( ) Nozzle temp Trigger First stage switch Negative pressure Work (Set at 4 C) Vaccum Degree Chart SVS-8AS SVS-8AS SVS-AS Pump TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES Solder melted consecutively on mm-dia land. Approx. 2 s / land. (with PX-2RT-B tip, TP-N- nozzle) pressure compared with other goot models (sec.) SUCTION CAPACITY COMPARISON The arrow indicates solder residue. SVS-AS MODEL SVS-8AS Voltage V AC / 6 Hz Power Consumption W Power. m Inlet type Temp. Desoldering Unit 2 4 C Setting Soldering Unit 2 48 C Range Rework - Insulation Resistance Over MΩ ( V DC) Pump System Diaphragm system -.8 MPa (-6 mmhg) Air Flow -2L /min Accessories Cleaning pin TP-CP-3 / Soldering iron stand ST-76 Total Weight 9.3 kg CONTROL BOX Output Voltage V AC 4 (W) 24 (H) 23 (D) mm Weight 8.4 kg (w/o cord, hose ) DE UNIT Input Voltage/Power Consumption V AC / 8 W Ceramaic 22 x mm Weight 2 g (w/o cord, hose ) Standard Nozzle TP-N-S UNIT Input Voltage/Power Consumption V AC / 7 W Ground Resistance Less than 2 Ω Leak Voltage Under 2 mv Ceramic heater Length 9 mm (with PX-2RT-B w/o cord bushing) Weight 7 g (with PX-2RT-B w/o cord ) Standard Tip PX-2RT-B REWORK UNIT SVS-8AS Input Voltage/Power Consumption V AC / W Nichrome Hose length between Handpiece and Control Unit m Length 22 mm (w/o cord) Weight 8 g (w/o nozzle, cord) This machine does not have vacuum pickup function. For replacement tips, nozzles, and optional parts, refer to p.64 & p. 79 DES HEATED TOOLS 73
4 DE SERVICE STATIONS Desoldering in an instant, with reduced solder residue! Combines desoldering gun and temperature-controlled soldering iron in one unit. SERVICE STATION SVS-8AS ANTI LEAD STATIC FREE 4% MORE SUCTION CAPACITY With open-valve mechanism CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs SUPERIOR TEMPERATURE-CONTROL CIRCUIT To keep the temperature constant during desoldering ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy SUCTION CAPACITY COMPARISON The arrow indicates solder residue. SVS-AS SVS-8AS DES HEATED TOOLS OPEN-VALVE MECHANISM Two-stage trigger switch (PAT.P) Step Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber. Step 2 Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber. Solder Pull trigger fully Soldering Unit ( ) Tip temp. Work (Set at 4 C) 2 3 Open-valve mechanism 4 (mmhg) Negative pressure chamber Trigger First stage switch Desoldering Unit ( ) Nozzle temp. Pump TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES Work (Set at 4 C) Vaccum Degree Chart Solder melted consecutively on mm-dia land. Approx. 2 s / land. (with PX-2RT-B tip, TP-N- nozzle) The open-valve allows the device to reach vacuum pressure of -.6MP (approx.-4 mmhg) in only.second. (about 4 times faster than our SVS- AS). pressure compared with other goot models SVS-8AS SVS-AS (sec.) CONTROL BOX Output Voltage V, V, V AC 2 (W) x 7 (H) x 6 (D) mm Weight 3.6 kg (w/o cord, hose ) DE UNIT Input Voltage/Power Consumption V, V, V AC 8 W Ceramaic 22 x mm Weight 2 g (w/o cord, hose ) Standard Nozzle TP-N-S UNIT SVS-8AS MODEL Voltage V, V, V AC / 6 Hz Power Consumption 2 W ( V, V) 27-3 W (22-24 V) Power. m Temperature Desoldering Unit 2 4 C Setting Range Soldering Unit 2 48 C Insulation Resistance Over MΩ ( V DC) Pump System Diaphragm system -.8 MPa (-6 mm Hg) Accessories Cleaning pin TP-CP-3 Soldering iron stand ST-76 Total Weight 4. kg (w/o cord ) Input Voltage/Power Consumption V, V, V AC 7 W Ground Resistance Less than 2 Ω Leak Voltage Under 2mV Ceramic heater Length 9 mm (with PX-2RT-B w/o cord bushing ) Weight 7 g (with PX-2RT-B w/o cord ) Standard Tip PX-2RT-B For replacement tips, nozzles, and optional parts, refer to p. 79 ST-76 soldering iron stand (included) 74
5 Combines desoldering gun and temperature-controlled soldering iron in one unit. SERVICE STATION SVS-AS ANTI STATIC POWERFUL VACUUM Everything from through-hole to multi-layered PCB CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy UNIT lstable temperature with excellent heat speed & heat recovery. lgood for a wide range of soldering work, for terminals, connectors, and flat ICs. DE UNIT lbuilt-in powerful and compact twin pump. lwhen trigger is pulled, the heater heats up forcibly, reducing temperature decrease. lafter trigger release, the pump operates for approx.. seconds more, reducing solder clogs. TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES Soldering Unit ( ) Tip temp Work (Set at 4 C) Solder melted consecutively on mm-dia land. Approx. 2 s / land. (with PX-2RT-B tip, TP-N- nozzle) Desoldering Unit ( ) Nozzle temp. (mmhg) Vaccum Degree Chart Work (Set at 4 C) (sec.) MODEL SVS-AS Voltage V, -3 V, V AC / 6 Hz Power Consumption 2 W ( V,-3 V) 27-3 W (22-24 V) Power. m Temperature Iron Unit 2 4 C Setting Range Desoldering Unit 2 48 C Insulation Resistance Over MΩ( V DC) Pump System Diaphragm system -.8 MPa (-6 mmhg) Accessories Cleaning pin TP-CP-7 Soldering iron stand ST-76 Total Weight 4.kg CONTROL BOX Output Voltage V, -3 V, V AC 2 (W) x 7 (H) x 6 (D) mm Weight 3.6kg (w/o cord, hose ) DE UNIT Input Voltage/Power Consumption -3 V, V AC / 8 W Ceramic 22 x mm Weight 2 g (w/o cord, hose ) Standard Nozzle TP-N- UNIT Input Voltage/Power Consumption -3 V, V AC / 7 W Ground Resistance Less than 2 Ω Leak Voltage Under 2mV Ceramic heater Length 9 mm (with PX-2RT-B w/o cord bushing) Weight 7 g (with PX-2RT-B w/o cord ) Standard Tip PX-2RT-B For replacement tips, nozzles, and optional parts, refer to p. 79 ST-76 soldering iron stand (included) DES HEATED TOOLS 7
6 DE AUTOMATIC DE New open-valve mechanism achieves unrivalled vacuum power and start-up speed. TP-28AS ANTI LEAD STATIC FREE 4% MORE SUCTION CAPACITY With open-valve mechanism CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs SUPERIOR TEMPERATURE-CONTROL CIRCUIT To keep the temperature constant during desoldering ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy SUCTION CAPACITY COMPARISON The arrow indicates solder residue. TP-2AS TP-28AS DES HEATED TOOLS OPEN-VALVE MECHANISM Two-stage trigger switch (PAT.P) Step Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber. Step 2 Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber. Solder Pull trigger fully Solder melted consecutively on mm-dia land. Approx. 2 s / land. (with TP-N- nozzle) Open-valve mechanism Negative pressure chamber Trigger First stage switch Desoldering Unit ( ) Nozzle temp. Pump NOZZLE TEMPERATURE-RECOVERY FEATURES The open-valve allows the device to reach vacuum pressure of -.6MP (approx.-4 mmhg) in only.second. (about 4 times faster than our TP-2AS). (mmhg) Work (Set at 4 C) Vaccum Degree Chart pressure compared with other goot models SVS-8AS TP-28AS SVS-AS TP-2AS (sec.) MODEL TP-28AS Voltage V, V, V AC / 6 Hz Power Consumption 3 W ( V, V) 7-2 W (22-24 V) Power. m Temperature Setting Range 2 4 C Insulation Resistance Over MΩ( V DC) Pump System Diaphragm system -.8 MPa (-6 mmhg) Accessories Cleaning pin TP-CP-3 Soldering iron stand ST-76 Total Weight Approx. 2.9 kg (w/o cord, hose ) CONTROL BOX Output Voltage V, V, V AC 9 (W) x 2 (H) x 26 (D) mm Weight 2.6kg (w/o cord, hose ) DE UNIT Input Voltage/Power Consumption - V, V AC / 8 W Ceramic 22 mm Weight 2 g (w/o hose ) Standard Nozzle TP-N-S For replacement tips, nozzles, and optional parts, refer to p. 79 ST-76 soldering iron stand (included) 76
7 Perfect for desoldering through-hole and multi-layered PCBs. TP-2AS POWERFUL VACUUM l Built-in powerful and compact twin pump. lwhen trigger is pulled, the heater heats up forcibly, reducing temperature decrease. lafter trigger release, the pump operates for approx.. seconds more, reducing solder clogs. Solder melted consecutively on mm-dia land. Approx. 2 s / land. (with TP-N- nozzle) Desoldering Unit ( ) Nozzle temp ) Vaccum Degree Chart (mmhg) Work (Set at 4 C) ANTI STATIC NOZZLE TEMPERATURE-RECOVERY FEATURES (sec.) MODEL TP-2AS Voltage V,-3 V, V AC / 6 Hz Power Consumption 3 W ( V,-3 V) 7-2 W (22-24 V) Power. m Temperature Setting Range 2 4 C Insulation Resistance Over MΩ ( V DC) Pump System Diaphragm system -.8 MPa (-6 mmhg) Accessories Cleaning pin TP-CP-7 Soldering iron stand ST-76 Weight Approx. 2.9 kg (w/o cord, hose ) CONTROL BOX Output Voltage V,-3 V, V AC 9 (W) x 2 (H) x 26 (D) mm Weight 2.6kg (w/o cord, hose ) DE UNIT POWERFUL VACUUM Everything from through-hole to multi-layered PCB CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy Input Voltage/Power Consumption -3 V, V AC / 8 W Ceramic 22 mm Weight 2 g (w/o cord, hose ) Standard Nozzle TP-N- For replacement tips, nozzles, and optional parts, refer to p. 79 DES ST-76 soldering iron stand (included) HEATED TOOLS 77
8 DE PORTABLE DE GUNS Handy, portable Desoldering Gun with combined temperature-control circuit and desoldering mechanism PORTABLE DE GUNS TP-/ AS POWERFUL VACUUM Everything from through-hole to multi-layered PCB CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy ANTI STATIC TP-AS TP-/AS FEATURES Easy to Use Compact design with an internal motor, pump, and temperature-control circuit built into the grip. Portable and efficient. DES Powerful Maximum vacuum of.8mpa (-6 mmhg). Removes through-hole solder easily. Variable Temperature Setting Sensor feedback system allows temperature setting from 2-4 C. Replaceable Cartridge Filter Makes changing the filter easy. Carry case included. Can be set from 2-4 C. Anti-static Model TP-AS HEATED TOOLS MODEL TP- TP-AS Voltage 3 V, V AC / 6 Hz Power Consumption 8 W (-3 V), 7 7 W (22-24 V) Power. m Temperature Setting Range 2 4 C Insulation Resistance Over MΩ ( V DC) Pump System Diaphragm system -.8 MPa (-6 mmhg) Ceramic Standard Nozzle TP-N- Cleaning pin TP-CP-7/ Filter TP-F Accessories Carry case Heat resistant pipe /Stand 22 7 mm Weight 47 g (w/o cord) Carry case with heat resistant pipe that allows the gun to be stored immediately after use. Also includes stand to rest the gun. For replacement tips, nozzles, and optional parts, refer to p
9 SVS-8AS/8AS/AS PX-2RT-B. 4 4 R.3 R PX-2RT-2BC PX-2RT-3BC. PX-2RT-4C 4 PX-2RT-C *TP-28GAS Desoldering Unit is not interchangeable with TP-2GAS (SVS-, SVS-AS, SVS-AS) 4 6 REPLACEMENT PARTS FOR TP-28AS/2AS PX-2RT-K 2 PX-2RT-8S REPLACEMENT PARTS FOR TP-/AS 3 TP-H Filter PX-2RT-B PX-2RT-2CR Cleaning Pin Vice. 3 PX-2RT-CR Round solder-plated type 7 6 REPLACEMENT NOZZLES SVS-8AS/8AS/AS/TP-28AS/TP-2AS/TP-(AS) 2 Felt B 2 Steel Wool 8 TP-N TP-N-*2 Felt Set TP-FT Felt A (3pcs) Felt B Steel Wool (3pcs) Felt A Cartridge Set TP-K S 2 4 S 2 TP-N-S* TP-N-S Cleaning Pin Vice Cartridge Steel Wool Felt A Felt B (pcs) TP-PV Cleaning Pin Overall View (Standard) 6.4 S TP-N-S8 Iron Unit SVS-8AS, SVS-8AS, SVS-AS Collar Overall View (Slim) Barrel Tip Spacer HEATED TOOLS TP-N TP-N-8 Filter Set TP-F ø.7 mm (for ø.8 &. mm nozzle) TP-CP-7 ø.3 mm (for ø. & 2. mm nozzle) TP-CP-3 DES TP-PV Drill Bit ø.7 mm TP-DB-7 Drill Bit ø.9 mm TP-DB-9 Drill Bit ø.4 mm TP-DB-4 Drill Bit ø2.4 mm TP-DB Cleaning Pin Pin vice body (The drill bit is not included.) Standard type PX-2RT-4CR Steel Wool Only (3pcs) TP-UL Felt B (pcs) TP-RFT PX-2RT-3CR Filter Set (3pcs) TP-F Cartridge Set TP-K Felt Set (3pcs) TP-FT ROUND SOLDER-PLATED TIP 4 Barrel TP-HP COMMON PARTS PX-2RT-6E Overall View.2 Desoldering Unit for TP-2AS TP-2GAS Barrel TP-HP *TP-28GAS Desoldering Unit is not interchangeable with TP-2GAS (TP-2, TP-2AS, TP-2AS).. PX-2RT-D PX-2RT-4D *Desoldering Unit for TP-28AS TP-28GAS TP-H PX-2RT-3.2D PX-2RT-2.4D. PX-2RT-.6D. 4 3 PX-2RT-3C PX-2RT-2C Iron Unit (common for SVS series) SVS-GAS for Soldering Iron SVS-H- Barrel for Soldering Iron TQ-77HP(S) Spacer for Soldering Iron TQ-77SS Collar for Soldering Iron TQ-77NUT *Desoldering Unit for SVS-8AS/SVS-8AS TP-28GAS Desoldering Unit for SVS-AS TP-2GAS for Desoldering Gun TP-H Barrel for Desoldering Gun TP-HP 4 REPLACEMENT PARTS FOR SVS-8AS/8AS/AS PX-2RT-BC PX-2RT-SB REPLACEMENT PARTS / OPTIONS REPLACEMENT TIPS *Model SVS-8AS, SVS-8AS, TP-28AS Standard Nozzle : TP-N-S *2Model SVS-AS, TP-2AS, TP-(AS) Standard Nozzle : TP-N- 79
10 DE DE WICKS RMA base flux. DE WICKS CP/CPN series MSDS CONVENTIONAL DISPENSER PACK lhigh-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux. lcan be used for precision PCBs safely. DISPENSER PACK WITH STAINLESS STEEL MOUTH lcan be used for precision PCBs safely. lergonomic design will keep your fingers cool. DES MODEL Type Width Length CP- Plain Knitting Approx.. mm CP-2 Plain Knitting Approx. 2. mm CP-2 Plain Knitting Approx. 2. mm Approx.. m CP-3 Plain Knitting Approx. 3. mm CP-3 Plain Knitting Approx. 3. mm ECONOMICAL PACKS OF PCS lwith convenient zipper bag. lcontains silica gel to reduce quality degradation. MODEL Type Width Length CP-Y Plain Knitting Approx.. mm CP-2Y Plain Knitting Approx. 2. mm CP-2Y Plain Knitting Approx. 2. mm Approx. 2m CP-3Y Plain Knitting Approx. 3. mm CP-3Y Plain Knitting Approx. 3. mm BULK-LENGTH SPOOL lbargain extra-long wicks with spool. lmakes it easy to take anywhere. HEATED TOOLS MODEL Type Width Length CP-- Plain Knitting Approx.. mm CP-2- Plain Knitting Approx. 2. mm CP-2- Plain Knitting Approx. 2. mm Approx.. m CP-3- Plain Knitting Approx. 3. mm CP-3- Plain Knitting Approx. 3. mm MODEL Type Width Length CP-B Plain Knitting Approx.. mm Approx. 3m CP-2B Plain Knitting Approx. 2. mm Approx. 3m CP-2B Plain Knitting Approx. 2. mm Approx. 2m CP-3B Plain Knitting Approx. 3. mm Approx. 2m CP-3B Plain Knitting Approx. 3. mm Approx. m 8
11 HALOGEN-FREE DE WICKS CPN SERIES MSDS ANTI STATIC l Available in packs of only. l Does not intentionally contain halogens. l RMA non-wash flux is used. (J-STD-4: ROLO) l Plain-knitting wick recommended for lead-free applications with high heat conduction. l Anti-static case. l Contains silica gel to reduce quality degradation. l With convenient zipper bag. MODEL Type Width Length Quantity CPN-2- Plain Knitting Approx. 2. mm Approx.. m pcs/ Pack CPN-3- Plain Knitting Approx. 3. mm HALOGEN-FREE Less than, ppm each of chlorine, bromine, fluorine and iodine content (JEITA Standards) Rosin HALOGEN-FREE RMA flux Length. mm 2. mm for Width 2. mm 3. mm for 3. mm Quantity. m CPN-2- CPN-3- CP- CP-- CP-2 CP-2- CP-2. m CP-2- CP-3 CP-3- CP-3 CP-3- CP-Y CP-2Y 2.m CP-2Y CP-3Y CP-3Y 3m m CP-3B 2m CP-2B CP-3B 3m CP-B CP-2B DES HEATED TOOLS 8
12 DE DE SUCKERS Manual pumps suck up solder. Plunger pumps are light, strong, and economical. DE SUCKERS GS series When the plunger is pushed, a piston extends out the nozzle. This prevents solder build-up. GS- Priming plunger cuum To prevent solder clogs JUMBO SIZE Large vacuum capacity PLUNGER LOCK FUNCTION Portable, compact storage PLUNGER LOCK FUNCTION The plunger can be stored inside the shaft by pushing it in completely, and pressing the vacuum release button. Compact storage. release button Priming plunger Shaft GS-4 GS-8 To prevent solder clogs PLUNGER LOCK FUNCTION Portable, compact storage ANTI-STATIC MATERIAL On the nozzle To prevent solder clogs ANTI-STATIC MATERIAL On the nozzle DES GS-8 GS-4 To prevent solder clogs PLUNGER LOCK FUNCTION Portable, compact storage MODEL GS- GS-4 GS-8 Color ivoly Length 33 mm 27 mm 9 mm When Stored 24 mm 2 mm Weight 89 g 6 g 2 g Diameter ø23 mm ø9 mm ø4 mm Applicable Nozzle GS-N GS-8N MODEL GS- GS-4 GS-8 Color Black Length 33 mm 27 mm 9 mm When Stored 24 mm 2 mm Weight 89 g 6 g 2 g Diameter ø23 mm ø9 mm ø4 mm Applicable Nozzle GS-N GS-8N To prevent solder clogseasy HEATED TOOLS GS- To prevent solder clogs PLUNGER LOCK FUNCTION Portable, compact storage JUMBO SIZE Large vacuum capacity REPLACEMENT NOZZLES GS-N GS-8N GS-N GS-8N ANTI-STATIC MATERIAL On the nozzle 82
PX-20H. RoHS PX-201. Power Lamp
STATIONS STATIONS IRONS Large tip for high thermal-storage effect. HIGH HEAT VOLUME TEMP-CONTROLLED IRON PX-01 Wide-range iron with temperature adjuster. IRON PX-1 IRONS Temperature Setting Screw PX-01
More informationCONTENTS SOLDERING SYSTEM TEMPERATURE-CONTROLLED SOLDERING STATIONS TEMPERATURE-CONTROLLED SOLDERING IRONS HIGH-EFFICIENCY SOLDERING IRONS
CONTENTS Soldering System Solder Feeder Unit Soldering Unit Sliding Unit Solder Reel Holder STATIONS Temperature-Controlled, Lead-Free Dual-Port Soldering Station Temperature- Controlled Lead-Free Soldering
More informationDigital LEAD FREE. Soldering Soldering. Temperature range. Station. N1-06 Nozzle ø0.6 N1-08 Nozzle ø0.8 N1-10 Nozzle ø1.0 N1-13 Nozzle ø1.3. ø2.
Desoldering Tool High-Power Desoldering Tool Digital Nozzle not included N2 Soldering Soldering (Option) (Option) Desoldering Vacuum pump built-in type desoldering tool Digital display ensures easy and
More information474A+ INSTRUCTION MANUAL DESOLDERING STATION
1 2 7 474A+ DESOLDERING STATION INSTRUCTION MANUAL Thank you for purchasing 474A+ Desoldering Station. Please read the manual before using the unit. Keep manual in accessible place for future reference.
More informationINTRODUCTION. 2
TAYO ELECTRIC GOOT INTRODUCTION InterElectronic Hungary Ltd. offers equipments, machines and different materials (ESD) of different production technologies (SMT/THT/LED). Including high quality, special
More informationConnections. Station. Male Connector: Pipe Thread 1/8
HAKCO470-471 DESOLOERING TOOL ^ AT Hakko 470 and Hakko 471 are designed for great thermal supply and suction power as well as provide protection against electrostatic discharges and electrical surges making
More informationDesoldering Tool. New. Portable Desoldering Tool. Packing List. Specifications
Desoldering Tool New Portable Desoldering Tool Nozzle included Power switch and adjustable temperature control built in the handle Use of high thermal efficiency N61 series nozzles Reduction of solder
More information474 DESOLDERING STATION
474 DESOLDERING STATION INSTRUCTION MANUAL Thank you for purchasing 474 Desoldering Station. Please read the manual before using the unit. Keep manual in accessible place for future reference. Manufacturer:
More informationE S D REWORK SYSTEM 3 IN 1, I702 USER S GUIDE
E S D REWORK SYSTEM 3 IN 1, I702 USER S GUIDE Thank you for purchasing the Rework system. This manual describes the use and maintenance of the Rework system. Please read it before reading the manual, keep
More information474A+ TIP CARE AND USE INSTRUCTION MANUAL DESOLDERING STATION
TIP CARE AND USE. Tip Temperature High soldering temperatures can degrade the tip. Use the lowest possible soldering temperature. The excellent thermal recovery characteristics ensure efficient and effective
More informationQuality tools for the electronics industry.
Quality tools for the electronics industry. Aug.2000 CA00005AB011 HAKKO -The first choice in precision soldering tools for the electronics industry. The Hakko Corporation has been producing high quality
More informationVol.49 SOLDERING IRONS, EQUIPMENT & ACCESSORIES TAIYO ELECTRIC IND. CO., LTD. SOLDERING SYSTEM SMT PRODUCTS SOLDERING STATIONS
2016-2017, EQUIPMENT & TAIYO ELECTRIC IND. CO., LTD. SMT DE SOLDERS TESTERS Vol.49 HEATED TOOLS HAND TOOLS HIROSHIMA JAPAN 2 soldering irons can be used., DUAL-PORT STATION RX-822AS p.20 Solder or desolder
More informationRepair System. Instruction Manual
Repair System Instruction Manual Thank you for purchasing the HAKKO 70 Repair System. Please read the manual before using the HAKKO 70. Store the manual in a safe, easily accessible place for future reference.
More informationLead-Free Repairing System INSTRUCTION MANUAL AIR NOZZLES
AIR NOZZLES Sold Separately Lead-Free Repairing System INSTRUCTION MANUAL Thank you for purchasing model Int2738 Lead free Repairing System. Please read manual before using the unit. Keep manual in an
More informationNew more-advanced multifunctional station. Equipped with 2 connection ports to enable a single station to simultaneously play 2 roles.
For lead-free soldering Soldering Iron FM-0 Parallel Remover Model FM-0 New more-advanced multifunctional station. Equipped with connection ports to enable a single station to simultaneously play roles.
More information34737-TL SMD REWORK STATION
34737-TL SMD REWORK STATION 1. Production Summary 1.1 Specification Rated power Input voltage Air Pump Capacity Hot Air Temperature Sensor 1.2 Function 320W AC110-130V, 60Hz Diaphragm pump 24L/min(max)
More informationAOYUE INT. Advanced Repairing System NT 701A++ INSTRUCTION MANUAL. Correct Disposal of this product
This appliance can be used by children aged form 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision
More informationNew more-advanced multifunctional station. Equipped with 2 connection ports to enable a single station to simultaneously play 2 roles.
For lead-free soldering Soldering Iron FM-0 Parallel Remover Model FM-0 New more-advanced multifunctional station. Equipped with connection ports to enable a single station to simultaneously play roles.
More informationHakko, as a specialized manufacturer of soldering irons, has established the Green Project.
Not only has Hakko been approved by ISO 9001 & 14001, but we are also conducting our own campaigns. We are involved in improving quality through 3 friendlies. Hakko is friendly to customers We always strive
More informationVol.44 全全全全全全全全全全 SMT REWORK-REPAIR STATION
10-11 全全全全全全全全全全 Vol.44 SMT REWORK-REPAIR STATION LEAD-FREE SOLDERING STATIONS TEMPERATURE CONTROLLED SOLDERING STATIONS HIGH EFFICIENCY SOLDERING IRONS SOLDERING IRONS SPECIAL PURPOSE SOLDERING IRONS
More informationHot Air Station Ref. JT-B
www.jbctools.com Hot Air Station Ref. JT-B www.jbctools.com Packing List Control Unit Ref. JTE-1B JTE-2B JTE-9B Stand Ref. JT-SB Heater hose set Ref. JT-T1A (100V - 120V) JT-T2A (230V) Extractor stand*
More informationSMT DESOLDERING DX LONER ATMOSCOPE Self-Contained SMT Deluxe Hot Air Station, Page 22
DX marks the spot. EDSYN s 1036DX self-contained hot air station navigates tight neighborhoods and densely populated areas with pinpoint accuracy the first time and every time. Address smaller SMD s in
More informationA. P. E. CORP. EX-675 PNUEMATIC DESOLDER STATION
A. P. E. CORP. EX-675 PNUEMATIC DESOLDER STATION INSTRUCTIONS FOR OPERATING THE EX-675 1. CONNECT THE PLASTIC CLEAR AIR TUBE OF THE HAND TOOL TO THE WHITE AIR FITTING ON THE FRONT OF THE EX-675 MACHINE,
More informationKey Features & Benefits w Digital display for repeatable w Automatic control of the preheater for w Easy profile creation for operator
MRS-00A Modular Rework System The MRS-00A Modular Rework System is an integrated convection rework system for the removal and reflow of BGA/CSP and SMT components. The MRS-00A is comprised of a convection
More informationTechnical Specifications
PCT-00 Focused Convection Preheater The PCT-00 is a focused convection preheater that is designed to provide extra heat capacity for demanding applications. Unlike conventional preheaters, the PCT-00 Focused
More informationZD-985 Desoldering Station
ZD-985 Desoldering Station 2 Contents Contents... 3 Unpacking and Setting Up Your ZD-985 Desoldering Station... 4 Setting Up the Unit... 5 Auto Tip Saver Function... 8 Tips and Techniques... 8 Alloy Melt
More informationASE-4313 Users Manual
LEAD FREE REWORK SYSTEM ASE-4313 Users Manual Thank you for purchasing this unit. It is designed for lead free soldering & de-soldering. Please read this manual before operating the unit. Store this manual
More informationHAKKO Soldering Iron Lineup
HAKKO Lineup FX-888D FX-889 FX-80 FX-88 FX-0 FX-95 FX-950 Types All-Round Heavy Duty IH High Permance Power consumption 70 W 5 W 00 W 58 W 5 W (85 W) 75 W 75 W Specifications Power consumption of Handpiece
More informationDesoldering Tool. (HAKKO FR-4102) Instruction Manual. Table of Contents
Desoldering Tool (HAKKO FR-4102) Instruction Manual Table of Contents 1. PACKING LIST AND PART NAMES... 1 2. SPECIFICATIONS... 1 3. WARNINGS, S AND NOTES... 2 4. INITIAL SETUP... 3... 4 5. OPERATION 6.
More informationHAKKO 703B REWORK SYSTEM TROUBLESHOOTING GUIDE
HAKKO 703B REWORK SYSTEM TROUBLESHOOTING GUIDE THIS TROUBLESHOOTING GUIDE IS DIVIDED INTO FOUR PARTS: 1. FLOW DIAGRAMS DEPICTING THE PROCESS OF ANALYZING THE PROBLEM OR PROBLEMS. 2. TABLES DEPICTING RMAL
More informationRework System Instruction Manual
Table of Contents 1. PACKING LIST 2. SPECIFICATIONS 3. WARNINGS, S AND NOTES 4. PART NAMES (Soldering iron) 5. INITIAL SETUP (Soldering iron) 6. OPERATION (Soldering iron) 7. PARAMETER SETTING (Soldering
More information4 Port Rework Station with 140 desoldering gun, M-type soldering iron and 670W hot air
Desoldering / Rework/SMD rework system /Jig Powerful rework stations that contain every function needed for rework Safer and more secure rework operation With upgraded all the applications 4-in-1 unit
More informationPBT-1 Internal Pipe Blasting Tool
PBT-1 Internal Pipe Blasting Tool Heavy-duty and Low Maintenance - For pipes 3 (75MM) 12 (300MM) ID - Adjustable centering carriage for consistent blast pattern - Use with standard blast machine The PBT-1
More informationVT-DESOL2 DESOLDERING STATION DESOLDEERSTATION STATION DE DESSOUDAGE ENTLÖTSTATION USER MANUAL GEBRUIKERSHANDLEIDING MANUEL D'UTILISATION
DESOLDERING STATION DESOLDEERSTATION STATION DE DESSOUDAGE ENTLÖTSTATION USER MANUAL GEBRUIKERSHANDLEIDING MANUEL D'UTILISATION GEBRAUCHSANLEITUNG : DESOLDERING STATION 1. Introduction Congratulations!
More informationINT. Lead-Free Repairing System INSTRUCTION MANUAL
INT 2702 Lead-Free Repairing System INSTRUCTION MANUAL Thank you for purchasing Aoyue Int2702 Repairing System. It is important to read the manual before using the equipment. Please keep manual in accessible
More informationInstruction Manual TABLE OF CONTENTS
Instruction Manual Thank you for purchasing the HAKKO FM-2029 Hot Air Handpiece. Please read this manual before operating the HAKKO FM-2029. Keep this manual readily accessible for reference. CAUTION HAKKO
More informationRD-500V RD-500SV ESD SMT REWORK SYSTEM
RD-500V All-IN-ONE Advanced Technology SMT Rework Station Compatible For The Rework Of All Different Types Of SMT Components Compact & Stable, Designed for 7d/24h Shifts SMT REWORK SYSTEM RD-500SV ESD
More informationDesoldering Tool. Instruction Manual
Desoldering Tool Instruction Manual Thank you for purchasing the Hakko 472D desoldering tool with digital temperature display. Please read this manual before operating the Hakko 472D. Keep this manual
More informationAOYUE 968A+ INT. Deluxe Repairing System INSTRUCTION MANUAL
AOYUE INT 968A+ Deluxe Repairing System INSTRUCTION MANUAL Thank you for purchasing Aoyue INT 968A+ Repairing System. It is important to read the manual before using the equipment. Please keep manual in
More informationSMD Rework Station TABLE OF CONTENTS
SMD Rework Station Thank you for purchasing the Hakko 850D SMD Rework Station. This unit features digital control and display of hot air temperature. Please read this manual before operating the Hakko
More informationProduct End-of-Life Disassembly Instructions Product Category: Networking Equipment
Product End-of-Life Disassembly Instructions Product Category: Networking Equipment Marketing Name / Model [List multiple models if applicable.] Main Processing Unit RSE-X2(4G DDR3/1AUX/1CON/1GE Mgt/1CF/1USB)
More informationTSX70. SMT Reflow Vacuum Workstation. ï COMPLIES WITH MIL-S-45743E, MIL-STD-2000, DOD-STD B, WS6536E AND ESD SPEC, DOD-STD-1686, DOD-HDBK-263
TSX70 SMT Reflow Vacuum Workstation ï COMPLIES WITH MIL-S-45743E, MIL-STD-2000, DOD-STD-2000-1B, WS6536E AND ESD SPEC, DOD-STD-1686, DOD-HDBK-263 MADE IN U.S.A. Hot Gas + Hot Tip Desoldering EDSYNÆ INC.
More informationMX-DS1 Desoldering Gun for the MX-500P & MX-5200 Series
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com MX-DS1 Desoldering Gun for the MX-500P & MX-5200 Series MX-DS1 U ser Guide Copyright OK International,
More informationpremium line Stations Different equipment designed for a specific soldering or rework job
premium line Stations Different equipment designed for a specific soldering or rework job Premium line stations are designed for extensive industrial use, with extraordinary thermal performance. They are
More informationERSA IR 500 A SMT/BGA Rework System
ERSA IR 500 A SMT/BGA Rework System Instructor: Víctor Burgos González Prof. Andrés Roldán Aranda 4º Bachelor Degree in Telecommunications Engineering Contents 1.- Introduction 2.- Functional elements
More informationSoldering iron. Power consumption 70W Temperature range ºC Temperature stability ±1ºC at idle temperature. Station
Soldering iron Digital model in an analog-model price bracket Features adjustment mode, preset mode, and password function Separable tip/heater design provides excellent value for money Supports the N
More informationBench Top SMT Pick & Place System
Bench Top SMT Pick & Place System The innovative, patent pending, ezpick SMT vacuum pick and place system provides an elegant, low cost and highly efficient solution to overcome the difficulties of manual
More informationProduct End-of-Life Disassembly Instructions
Product End-of-Life Disassembly Instructions Product Category: Calculators Marketing Name / Model [List multiple models if applicable.] Main Processing Unit RSE-X1(2G DDR/1AUX/1CON/1GE/1CF/2USB)(RT-RSE-X1-H3)
More informationSoldering, Desoldering & Rework System
Soldering, Desoldering & Rework System Industry Standard, Soldering, Desoldering And Rework System Metcal s Soldering, Desoldering & Rework System is the benchmark against which other soldering, desoldering
More informationHAKKO brand is much loved in more than 50 countries worldwide.
Q u a l i t y T o o l s F o r T h e E l e c t r o n i c s I n d u s t r y SWEDEN HAKKO Glo IRELAND DENMARK GERMANY UNITED KINGDOM FRANCE SWITZERLAND PORTUGAL SPAIN ITALY POLAND CZECH REPUBLIC HUNGARY ROMANIA
More informationOperating Instructions for the BBO-1 and BBO-2 Basket Blasters
Operating Instructions for the BBO-1 and BBO-2 Basket Blasters 2101 West Cabot Boulevard Langhorne, PA 19047-1893 www.empire-airblast.com Page 2 Model Number: Serial Number: Date of Purchase: Date of Installation:
More informationInstruction Manual. SMD Rework Station with Vacuum Pickup TABLE OF CONTENTS
SMD Rework Station with Vacuum Pickup Instruction Manual Thank you for purchasing the HAKKO FR-803 SMD Rework Station. This unit features: Digital control and display of time and temperature Display of
More informationVariable Temperature Digital Solder and Desolder Station
Variable Temperature Digital Solder and Desolder Station Model: DSDS User Manual Warning This tool must be placed on its stand when not in use. A fire may result if the appliance is not used with care,
More informationDesoldering DS017 DS017-P DS017LS AS196 US140 US140-P. LT-1 Lead free tip tinning compound (.5 oz. )
For over 40 years EDSYN has been manufacturing high quality precision soldering and desoldering tools and associated equipment. Don t compromise on quality and features, always specify EDSYN. Desoldering
More informationPlease check to make sure that all items listed below are included in the package. Tip tray. 1.2 m (4 ft)
Multi Rework Station Instruction Manual Thank you for purchasing HAKKO FM-206 Rework System. Please read this manual before operating the HAKKO FM-206. Keep this manual readily accessible for reference..
More informationFilabot EX6 Extruder. Operation Manual. CAUTION! Read Carefully. Filabot Vermont, USA, Earth
Filabot Vermont, USA, Earth 1-802-505-6772 CAUTION! Read Carefully HOT MATERIALS & SURFACES Use gloves and eye protection while operating the EX6 Extruder. The barrel and nozzle are HOT and melted plastic
More informationIntelligent Lead Free Soldering Station OPERATION and MAINTENANCE MANUAL
Intelligent Lead Free Soldering Station Sensor in front High frequency heating Digital Calibration Rapid recovery of temperature OPERATION and MAINTENANCE MANUAL Thank you for purchasing a lead free soldering
More informationNTS STRUME IN N-ON DE
DEN-ON INSTRUMENTS INTRODUCTION InterElectronic Hungary Ltd. offers equipments, machines and different materials (ESD) of different production technologies (SMT/THT/LED). Including high quality, special
More informationCARPET MAINTENANCE - NEW PRODUCT GUIDE
CARPET MAINTENANCE - NEW PRODUCT GUIDE QUIET WALK-BEHIND BATTERY EXTRACTOR QUIET 60 DB(A): perfect for the hospitality and healthcare industries EFFICIENT: clean over 4,000 sq ft per hr. saving you time
More information952SX-230. LONER Temperature Controlled Soldering Station
952SX-230 LONER Temperature Controlled Soldering Station ï COMPLIES WITH MIL-S-45743E, MIL-STD-2000, DOD-STD-2000-1B, WS6536E AND ESD SPEC, DOD-STD-1686, DOD-HDBK-263 made in U S A instruction manual Specifications
More information3. WARNINGS, CAUTIONS, NOTES AND EXAMPLES CAUTION
. WARNINGS, CAUTIS, NOTES AND EXAMPLES. PACKING LIST HAKKO FM-0 Power cord Tip tray Instruction manual HAKKO FM-0. SPECIFICATIS Power Consumption MAX 0W (0W) Range HAKKO FM-0/0 00-0 (00-0 ) MODEL FM-0/0
More information1.2 m (4 ft) Weight (w/o cord) 30 g (0.067 lb./1.07 oz.)with 2.4D tip
Multi Rework Station Instruction Manual Thank you for purchasing HAKKO FM-206 Rework System. Please read this manual before operating the HAKKO FM-206. Keep this manual readily accessible for reference..
More informationOperation and Maintenance Manual for the SX-90 & SX-80 Sodr-X-Tractor Handpieces Rev F
Operation and Maintenance Manual for the SX-90 & SX-80 Sodr-X-Tractor Handpieces 5050-0492 Rev F Part Number Model Features 6010-0106-P1 SX-80/90 (Black connector) Handpiece Only 6010-0149-P1 SX-90 (Blue
More informationINSTRUCTION MANUAL FOR LF-369D TENWERATURECONTROLLED SOLDERING STATION
INSTRUCTION MANUAL FOR LF-369D TENWERATURECONTROLLED SOLDERING STATION INTRODUCTION Thank you for purchasing the LF-369D soldering station - the best solution for your soldering equipment needs! We believethat
More informationQUICK 3202 OPERATION MANUAL. Lead Free Soldering Station
QUICK 30 Lead Free Soldering Station OPERATION MANUAL Thank you for purchasing the unit. It is designed for lead free soldering. Please read this manual carefully before use and keep it for future reference.
More informationDSSHP06G Intelligent Lead Free Soldering Station INSTRUCTION MANUAL
DSSHP06G Intelligent Lead Free Soldering Station Sensor in front High frequency heating Digital Calibration Rapid recovery of temperature INSTRUCTION MANUAL Thank you for purchasing this lead free soldering
More informationSOLDERING EQUIPMENT AND ACCESSORIES CHEMICAL PRODUCTS
SOLDERING EQUIPMENT AND ACCESSORIES CHEMICAL PRODUCTS High performance protection for electrics and metals. WET.PROTECT e-basic protects everywhere, where electrics and electronics come into contact with
More informationWHA 3000V Hot Air Station
WHA 3000V Hot Air Station Operating Instructions Version 1.1 Page 1 of 14 Table of contents 1. Description 5 Technical data 5 2. Commissioning 6 2.1 Manual operating mode 6 2.2 Automatic operating mode
More information951SX-230 LONER Temperature Controlled Soldering Station
951SX-230 LONER Temperature Controlled Soldering Station COMPLIES WITH MIL-S-45743E, MIL-STD-2000-1B, WS6536E AND ESD SPEC, DOD-STD-1686, DOD-HDBK-263 made in U S A Instruction manual Specifications for
More informationCATALOGUE MODULAR SERIES THE STRENGH OF EXPERIENCE
CATALOGUE MODULAR SERIES THE STRENGH OF EXPERIENCE ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 More than 80 years of specialized experience have placed JBC at the
More informationProMinent ProMus Hydraulic Diaphragm Metering Pumps
ProMinent ProMus ProMinent ProMus Description: The ProMus is a motor driven metering pump with a hydraulically actuated diaphragm. The drive case and the hydraulic unit are filled with a liquid that functions
More informationSOLDERING /DESOLDERING/REWORK SOLUTIONS. JAPAN ISO 9001:2008
ISO 9001:2008 WE DEAL IN ONLY PROFESSIONAL QUALITY PRODUCTS. High quality products are chosen carefully by our experts. We provide application support, Quick delivery, After sales service. Professional
More informationK 4 Full Control Home
K 4 Full Control Home The K 4 Full Control home is the perfect partner for cleaning your patio or decking. The handy home kit comes with a T350 and a 1L bottle of stone detergent. MISSING PIC- TURE: D:\
More informationOPERATING MANUAL FOR LF-852DII HOT-AIR S.M.D. REWORK STATION
OPERATING MANUAL FOR LF-852DII HOT-AIR S.M.D. REWORK STATION Thank you for choosing XYTRONIC LF-852DII S.M.D. Rework Station. This tool is specially designed for soldering, desoldering Surface Mount Devices
More informationHakko, as a specialized manufacturer of soldering irons, has established the Green Project.
Not only has Hakko been approved by ISO 9001 & 14000, but we are also conducting our own campaigns. We are involved in improving quality through 3 friendlies. Hakko is friendly to customers We always strive
More informationOPERATION MANUAL WARNING TAIYO ELECTRIC IND.CO.,LTD. MODEL XPR-600 PREHEATER
MODEL XPR-600 PREHEATER OPERATION MANUAL WARNING Before using the XPR-600 Preheater, read the Owner's Operation Manual. Failure to follow the safety precautions and instructions in this manual could result
More informationK 4 Full Control MISSING PIC- TURE: D:\ IM
K 4 Full Control The K 4 Full Control is the perfect partner for tackling tough, medium sized cleaning tasks. This model comes with a dirt blaster and a vario power spray lance. MISSING PIC- TURE: D:\
More informationSMD Rework Station with Vacuum Pickup. Instruction Manual
SMD Rework Station with Vacuum Pickup Instruction Manual Thank you for purchasing the HAKKO FR-803 SMD Rework Station. This unit features: Digital control and display of time and temperature Display of
More informationInstruction Manual. for. Soldering / SMD Rework Station. For Lead-free soldering application and rework on professional SMD electronics.
Instruction Manual for Soldering / SMD Rework Station LF-16 1680 For Lead-free soldering application and rework on professional SMD electronics. INTRODUCTION Thank you for purchasing Xytronic s soldering
More informationESD Safe UL Approved INSTRUCTIONAL MANUAL EX V EX V TEMPERATURE CONTROLLED SOLDERING STATION
ESD Safe UL Approved INSTRUCTIONAL MANUAL MODEL PART NUMBER EX-685 110V 0685-0000 EX-685 220V 0685-2000 TEMPERATURE CONTROLLED SOLDERING STATION AUTOMATED PRODUCTION EQUIPMENT 3661 Horseblock Road, Medford,
More informationUsed Fluid Handling Portable Used Oil Gravity Drains
Portable Used Oil Gravity Drains Choose the fluid handling equipment that fits your needs. Traditional Drain: the traditional method for handling used fluids allows gravity to drain fluids from vehicle(s)
More informationShop Online Eccotemp.com/products. Store Locator Eccotemp.com/locator. Product Support support.eccotemp.com.
L5 20 minute automatic safety shutoff timer Battery igniter - no electricity needed Minimum flow rate is approximately 0.4 gallons per minute Up to 18 hours of use on a 20 lb. tank Shower head with On/Off
More informationLubrication Tools and Equipment Portable Oil Drains
Portable Oil Drains Choose the fluid handling equipment that fits your needs. Traditional Drain: the traditional method for handling used fluids allows gravity to drain fluids from vehicle(s) into a portable
More informationRND Soldering Station. RND W Temperature Controlled Soldering Station Instruction Manual
RND 560 00155 100W Temperature Controlled Soldering Station Instruction Manual 1 INTRODUCTION Thank you for purchasing this intelligent high power RND lab soldering station the best solution for your soldering
More informationSPECIFICATION OF ANALOG MEMS MICROPHONE. ( Ultra Mini Top Port ) MODEL NO. : F1-(A)MOE-C110T42-4CP
SPECIFICATION OF ANALOG MEMS MICROPHONE ( Ultra Mini Top Port ) MODEL NO. : F1-(A)MOE-C110T42-4CP DIRECTIVITY : OMNI-DIRECTIONAL SOUND PORT : TOP PORT TYPE DATE : 2014. 12. 08 Prepared Checked Checked
More informationDSSLF2X04H 2 IN 1. Intelligent Lead Free Soldering Station. OPERATION and MAINTENANCE MANUAL
401H000898 DSSLFX04H Intelligent Lead Free Soldering Station IN 1 OPERATION and MAINTENANCE MANUAL Thank you for purchasing a lead free soldering station. It is designed for lead free soldering. Please
More informationAOYUE. INT 738+ (Centigrade / Fahrenheit switchable) Multi-Function Re-Working System INSTRUCTION MANUAL. Replacement Air Nozzles
BGA SOP Replacement Air Nozzles MODEL# SGL Ø 1325 Air Nozzle NOZZLE SIZE Ø 1124 2.4mm 1130 4.4mm 1194 6mm 1195 8mm 1196 7mm 1197 9mm 1198 12mm MODEL# IC SIZE L(mm) W(mm) 1010 9 9mm 10 10 1313 12 12mm 13
More informationInstruction Manual. for. Intelligent Temperature Controlled Soldering Station LF-2000 (U)
Instruction Manual for Intelligent Temperature Controlled Soldering Station LF-2000 (U) For Lead-free soldering application and rework on professional SMD electronics. 1 INTRODUCTION Thank you for purchasing
More informationK 4 Premium Full Control Home
K 4 Premium Full Control Home The K 4 Premium Full Control Home comes with a five year warranty. The addition of a hose reel and the home kit make cleaning around your home easier than ever. MISSING PIC-
More informationFull Size Canister Service Manual Riccar Models 1700 / 1800 Power Nozzles RPB-100 / RPB-220 / RPB-224 / RPB-250
Full Size Canister Service Manual Riccar Models 1700 / 1800 Power Nozzles RPB-100 / RPB-220 / RPB-224 / RPB-250 Table of Contents I. General Full Size Canister Issues...2 A. Full Bag Indicator...2 1. General
More informationSoldering Station INSTRUCTION MANUAL
2 9 0 0 Soldering Station INSTRUCTION MANUAL Thank you for purchasing model 2900 Soldering station. Please read manual before using the unit. Keep manual in an accessible place for future reference. Manufacturer:
More informationK 4 Basic. Outstanding performance. Three-piston axial pump. Safety valve and motor-stop function. Quick Connect
K 4 Basic The K 4 Basic pressure washer with water-cooled motor, for occasional use and moderately dirty cars, garden fences, bicycles etc. With extendable, space-saving handle. 1 Outstanding performance
More informationIndustrial Contractors Supplies
Industrial Contractors Supplies - Dust Director Division - 15061 Route 30, N. Huntingdon, PA 15642 Phone: 412. 824. 6933 Fax: 412. 824. 4704 www.dustdirector.com 2010 Catalog 2010 Catalog 2010 Catalog
More informationSIMPLICITY MODEL LVPB7200
SIMPLICITY MODEL 7200 LVPB7200 BODY GROUP 7200 BODY GROUP 7200 Key Part No Description Key Part No Description 1 7.8-PLAIN Simplicity 7000 Paper Bag 29 D625-0231 Suction Inlet Complete 2 B221-0213 Dust
More informationPremium Micro Desoldering station
www.jbctools.com English Premium Micro Desoldering station Ref. DSS-D Packing List The following items should be included: DI Control Unit... 1 unit Ref. DI-1D (120V) DI-2D (230V) DI-9D (100V) Electric
More informationInstallation Instructions EFS Hand Washing Station
Installation Instructions EFS Hand Washing Station Both water and soap are sequenced and dispensed from outlet. Override button allows for non potable, water-only dispensing. Lighted icons indicate the
More informationWeller. Zero-Smog Filter Systems. Tip Extraction. Volume Extraction
Weller Zero-Smog Filter Systems The Weller Zero-Smog Systems put an end to air pollution caused by soldering, adhesives and laser work. In all of these applications fumes or fine particles are released
More informationSOLDER POT POT-100C / 103C POT-200C / 203C
OPERATION MANUAL SOLDER POT POT-100C / 103C POT-200C / 203C POT-203C WARNING Read this Owner's Operation Manual before using your solder pot. Failure to follow the safety precautions and instructions in
More informationTECNOIL 150 M INDUSTRIAL VACUUM FOR CHIPS AND OIL RECOVERY. Tension Volts/Hertz 230/50 Motors N. 2
TECNOIL 150 M INDUSTRIAL VACUUM FOR CHIPS AND OIL RECOVERY Tension Volts/Hertz 230/50 Motors N. 2 2,5 3,3 Max Vacuum Rate* mm.h2o 2800 Max Air Flow** M3/h 380 Filter surface cm2 8000 Capacity (liquid)
More informationoriginal your automatic choice Socorex The Socorex original models Twin syringe = extended programme
Socorex original your automatic choice animal health > veterinary > vaccination > injection syringes The Socorex self-refilling syringes with spring-loaded plunger and threeway valve system are designed
More information