SOLDERING EQUIPMENT AND ACCESSORIES CHEMICAL PRODUCTS

Transcription

1 SOLDERING EQUIPMENT AND ACCESSORIES CHEMICAL PRODUCTS High performance protection for electrics and metals. WET.PROTECT e-basic protects everywhere, where electrics and electronics come into contact with moisture. It infiltrates the moisture and then forms a lasting protective film. ALPA-GEL protects cable connections from dust and moisture. Removal is possible at any time, without leaving any residue. Note: Due to the limited shelf-life, it is not possible to return the spray and cleaner cans!

2 Lead-free electronic solder (weight %. ± 0.), not corrosive on non-ferrous metals, on disposable spools Wire ø mm Weight g Electronic solder Wire ø mm Weight g Radio solder Wire ø mm Weight g 0 0 Solder in triangular rods according to DIN EN, extruded, standard dimensions: x x mm, approx. length 0 mm SN % kg 00 0 kg 00 0 kg 00 Lead-free solder in triangular rods according to DIN EN, extruded, standard dimensions: x x mm, approx. length 00 mm SN %. kg 0 Soldering grease according to DIN EN -...C, for the soft soldering of tinplate and leaded sheet metal, for the tinning of copper Advice and ordering: Phone: 0-0, Fax: 0 -, bestellung@cimco.de 0 g 00 0 g 0 0 g 0

3 Contact soldering paste 0 g tin 00 Desoldering pump Ideally suitable for repair work on circuit boards and electronic components, in professional industrial quality with extremely high and constant suction power and large aluminium solder chamber, low weight (only g), with 000 Electronic soldering devices 0 Volt, with plastic handle,. m power cable and Schuko safety plug, interchangeable copper soldering tips Watt Soldering tip temp. App. heating time Soldering tip ø mm. min -straight 0 Replacement soldering tip for min -straight 000 Replacement soldering tip for min -bent 0 Replacement soldering tip for min -bent 00 Replacement soldering tip for min -bent 0 Replacement soldering tip for Tool holder for electrical and gas soldering irons With tray for cleaning sponge Electrical soldering gun 0 Volt, with soldering point light and Euro plug 0 x mm 00 Watt Soldering tip temp. App. heating time 0 0. min 000 Replacement soldering tip 00 Gas soldering set, piece for lighter butane gas. For challenging soldering tasks without obstructive cables in all locations where power supply is not available, e.g. in installation, service and repair areas. Also suitable for heat-shrinking work, micro-welding to 00 C, burning duration approx. 0 min. In handy storage and carrying case made from impact-resistant plastic with viewing window. Set consisting of unit each of: - Gas soldering iron with protective safety cap and locking device 0 - Pencil tip soldering tip 0 - mm single-sided, diagonal soldering tip (elliptical shape) 0 -. mm dual-sided, diagonal soldering tip (chisel shape) 0 - Hot knife with. mm blade width for cutting and shaping 0 of plastic and hard foams mm and mm spanner for soldering tip assembly - Cleaning sponge in 0 x 0 mm sponge container - Comprehensive instruction manual -piece gas soldering iron set x 0 x mm 000 Gas soldering iron, individual device x mm 0 Primary voltage 0 V, 0/0 Hz, secondary voltage V, safety transformer, LED function display, soldering iron with separate equipotential bonding and interchangeable soldering tip Watt Soldering tip temp. App heating time Soldering tip ø mm 0. min 00

4 Replacement soldering iron Watt Soldering tip temp. App. heating time Soldering tip ø mm 0. min 0 Cleaning sprays Plastic cleaner cleans and degreases plastics, ideal for the pre-treatment of surfaces when bonding sensitive plastics, rubber or painted surfaces, evaporates without leaving residue. 00 ml Cleaner and degreaser cleaner and degreaser for all metals, glass and ceramic as well as the majority of plastics. Cleans stubborn dirt such as oil, grease, tar, wax, silicone/adhesive residue from electrical contacts, boilers and burners, brakes, clutches, engines, transmissions, etc. without leaving any residue, degreasing effect. 00 ml TFT/LCD screen cleaner Reliable removal of dirt, dust, grease and nicotine. Leaves behind an anti-static effect in order to provide long-term surface protection against contamination. Also suitable for use on sensitive plastics and glass surfaces. Application 0 ml Multi-foam The powerful universal cleaner, completely biodegradable. Cleans all metals, glass and plastic parts without leaving bonding and freezing solid, etc. 00 ml Technical sprays AT all-round spray with PTFE Corrosion protection, cleaning, lubrication, water displacement and conservation in a single product. Displaces moisture on electrical lines, prevents creep currents, loosens seized screws, etc. eliminates does not attract dust. 00 ml 00 PTFE spray a dry, clean, grease-free, highly-adhesive and durable dry lubricant. Repels dirt, dust and water. Resistant to corrosive chemicals and oils. Temperature-resistant from 0 C to +0 C. 00 ml 0 Silicone spray An ideal lubricating, protecting, maintenance and release agent. Facilitates the drawing in of cables, protects electrical contacts from moisture, protects rubber, plastic and metal parts. Only handle when in a de-energised state. 00 ml 0 Rust remover and contact spray Corrosion protection, cleaning, lubrication, water displacement and conservation in a single product. Removes rust, displaces water from ignition contacts and electrical lines, provides sustainable protection against corrosion and greases sliding surfaces, with good creeping properties. Prevents creep currents, sparks and short circuits. 00 ml 0 Advice and ordering: Phone: 0-0, Fax: 0 -, bestellung@cimco.de

5 Freeze spray For thermal troubleshooting and the quickest functional testing of electrical components, thermostats, ignition and control units, for the cooling of motor parts and heat-sensitive components (e.g. in order to prevent overheating 00 ml 0 Compressed air spray Removes dust and loose contamination without residue, thus enabling a dry, contact-free cleaning, even in inaccessible corners and on sensitive surfaces when dealing with electronic devices, magnetic heads, cameras, clockwork mechanisms, model-making equipment, metrology, etc. 00 ml All-round spray and hobby, acts as corrosion protection on metal parts, as penetrating oil (rust remover, elimination of squeaking and creaking noises), as a water displacing agent, as a lubricant and as a cleaner (including oil, grease, tar and generators and solenoid switches. 00 ml 0 ml Smoke detector test spray Special testing gas for the quick and reliable functional testing of photoelectric (optoelectronic) smoke detectors 0 ml Adhesives Assembly adhesive is possible to bond cable ducts in areas where drilling is not possible (e.g. on walls and ceilings) without any problems whatsoever. The assembly adhesive is silicone and solvent free and can be coated / painted over ( wet on wet ). white ml grey ml Epoxy minute adhesive Transparent -component adhesive with extremely strong adhesion, elastic as well as impact/tension/shock resistant, for all materials. g Fast metal minute adhesive 0 C to + C. g CIMLOCK screw lock Premium adhesive and sealant for the securing, fastening and sealing of screws, studs, joint and surface connections. Hardening takes place following metal contact with the air. Medium strength, for gap bridging 0.0 mm to max. 0. mm. Universal instant adhesive Solvent-free and cold-setting cyanoacrylate adhesive that hardens under pressure. ml g 00 Product video Smoke detector test spray

6 Silicone component adhesive and sealant, bonds to the majority of substrates, such as aluminium, steel, glass, glass fabric, ceramic, plastic, wood and many other materials. transparent ml 0 white ml grey ml Metal sprays Zinc spray Durable, quick-drying cathodic corrosion protection with long-term effect for all metal surfaces, resistant to salt, water and heat up to approx. 00 C, suitable for the improvement of damaged zinc coatings. 00 ml 0 light 00 ml Aluminium spray.% pure aluminium, long-term heat resistant protection up to +00 C, bonds to almost all materials such as steel, nonferrous metal, wood, cardboard, plastic, ceramic, etc. resistant to the effects of weathering. 00 ml Stainless steel spray Corrosion-resistant and effective surface coating, bonds securely to all metals, glass, wood, stone, cardboard and the majority of plastics. 00 ml WET.PROTECT parts, can be used as a preventive measure or directly following the effects of moisture as a means of repair. Only handle when in a de-energised state. For use in industry, trade and private household e.basic 0 ml e.basic 0 ml For use on motorbikes, trikes and mopeds e.motorbike 0 ml For use on boats and yachts in saltwater environments e.nautic 0 ml e.nautic 0 ml For use on passenger cars and heavy goods vehicles e.car 0 ml Note: Due to the limited shelf-life, it is not possible to return the spray and cleaner cans! Cartridge gun For all standard cartridges (e.g. silicone), open skeleton structure, soft delivery stroke, extremely long service life, with pressure release and spray nozzle opener 0 Hot glue gun set Electronic temperature control, mechanical feed device for glue sticks, approx. melting temperature 0 C, approx. heating time min., output W, for mm ø glue sticks. Supplied in a practical plastic case complete with glue sticks. set 00 glue sticks Length 0 mm 0 Advice and ordering: Phone: 0-0, Fax: 0 -, bestellung@cimco.de

7 Plaster and assembly cement Supply to wholesale trade in Germany only in full packaging units (= pallet per article) and from a minimum total delivery amount of t per shipment! Building and electrician plaster indoors. Specially designed for building and electrical work. Also ideally suitable for forming and model-making work. Approx. processing time of to minutes, approx. mixing ratio of l water / kg, approx. storage time of months. pallet in paper sack kg Sacks 00 kg 0 Sacks 0 kg 0 Sacks 0 in plastic bucket kg buckets 0 Fixing plaster smooth concrete surfaces with Betokontakt and highly absorbent substrates with primer or absorbent barrier. The, approx. storage time of months. pallet in paper sack kg 0 Sacks 0 RED-WHITE bonding plaster Single-layer indoor plaster complete with adhesive additives and high yield for manual processing on all common plaster substrates as well as on rough or smooth concrete surfaces indoors including domestic kitchens and bathrooms. A pre-treatment with Betokontakt is essential when dealing with smooth substrates. Smoothened, felted or can be freely processed. Processing time approx. 0 minutes (depending on processing conditions), recommended plaster thickness mm, material consumption approx. m / kg sack with mm plaster thickness, approx. storage time of months. pallet in paper sack kg 0 Sacks 0 Assembly cement MZ wall hooks, doors, gates, frames, switch boxes and much more. For the sealing of water penetrations in concrete, masonry and pipes. For the improvement of stair steps, screeds, concrete and plaster. Approx. processing time of - minutes, approx. mixing ratio of l water / kg powder, approx. storage time of months. pallet in plastic bucket kg 0 buckets 0 kg buckets 0