Vol.49 SOLDERING IRONS, EQUIPMENT & ACCESSORIES TAIYO ELECTRIC IND. CO., LTD. SOLDERING SYSTEM SMT PRODUCTS SOLDERING STATIONS

Transcription

1 , EQUIPMENT & TAIYO ELECTRIC IND. CO., LTD. SMT DE SOLDERS TESTERS Vol.49 HEATED TOOLS HAND TOOLS HIROSHIMA JAPAN

2 2 soldering irons can be used., DUAL-PORT STATION RX-822AS p.20 Solder or desolder small parts in small space NEW AUTOMATIC SOLDER FEEDER p.30 FD-110/100 6 seconds to set temperature. The ultimate solution for lead-free soldering p.24 STATION RX-802AS TEMPERATURE-CONTROLED MICRO SOLDRING STATION RX-812AS p.18 Phenomenal heat recovery with 150W compact high-output heater. NEW 500W Ultra high power soldering station RX-892AS p.16 STATION RX-852AS p.22 Nitrogen improves solder wetting and fillet shape. DESKTOP FA-1000 p.10 p.26 NITROGEN STATION RX-802ASPH 2

3 CONTENTS Soldering System Solder Feeder Unit Soldering Unit Sliding Unit Solder Reel Holder 500 W Ultra high power soldering station Lead-Free Micro Soldering Station Lead-Free Dual-Port Soldering Station Lead-Free Soldering Station Lead-Free Nitrogen Soldering Station N2 Station Lead-Free Automatic Solder Feeder Temperature-Controlled Soldering Stations Mini Soldering Stations Soldering Controllers High Heat Volume Temp-Controlled Soldering Iron Temperature-Controlled Soldering Iron Fixed-Temperature Soldering Irons Tip Thermometer Soldering Tester HIGH-EFFICIENCY Quick-Heat Soldering Irons Precision PCB Soldering Irons Precision-Component Mounting-Board Soldering Irons Precision-Component Mounting-Board Soldering Irons High-Power Soldering Irons Temperature-Controlled Stained-Glass Soldering Iron Stained-Glass Soldering Irons NICHROME HEATER / SPECIAL PURPOSE / GAS-POWERED General Electronics Soldering Irons Sheet-Metal Soldering Irons Dual-Power Soldering Irons Portable Soldering Iron With Cap Low-Voltage Soldering Irons Starter Kit (Electronics/ Craft & Hobby) Gas-Powered Soldering Iron / Soldering Tester Tip Thermometer Sensor Unit Solder Pots PCB Dipping Holder SURFACE-MOUNT/ SMT Hot-Air Rework Stations Handpiece Holders Board Holders Preheaters SMT Rework Repair System Hot-Air Pencil Reball Kit Soldering Tweezers DE Service Stations Automatic Desoldering Stations Portable Desoldering Guns Desoldering Wicks Desoldering Suckers Air Purifying Fume Vacuum Anti-Static Mats Wrist Straps Surface Resistivity Meter Low-Dust Gloves Anti-Static Gloves Solder Assist Precision Tweezers Heat Clips Tip Refresher Tip Cleaners Soldering Iron Stands Solder Reel Holders Magnifiers Mini Vise Core Alignment Tools Ceramic Core Drivers Maintenance Tool Sets SURFACE-MOUNT / SMT DES Lead-Free Spool Solders Special Spool Solders Soldering Pastes Anti-Seize Paste HEATED TOOLS Hot Bond Mini Hot Bond Hot Sticks Power Controller Hot Slicer Hot Knife HAND TOOLS Air-Powered Depaneling Tool Super Cutters Hobby Nippers Hobby Pliers Manual Depaneling Tools Precision Nippers 1.5 mm Platform Nippers Precision Pliers Crimping Pliers Wire Strippers Manual Depaneling Tool Precision Wire Strippers Cable Strippers HEATED TOOLS HAND TOOLS 3

4 Key to Icons LEAD FREE SST ANTI STATIC MSDS Meets directive. A product specifically designed to handle lead-free solder applications. A product made of anti-magnetic stainless steel. A product which is manufactured using anti-static materials. Material Safety Data Sheet available. Meets EC directives. [Model name / voltage may differ.] B BS-10/15/850 PASTES 92 BS-2 TIP REFRESHER 88/92 BS-H20B ANTI-SEIZE 92 C CA-30R/40R PORTABLE IRON WITH CAP 48 CD-10 CORE ALIGNMENT TOOLS 90 CD series CERAMIC CORE DRIVERS 90 CP/CPN series DE WICKS 80/81 CS-21/31 PRECISION PCB 42 CXR-31/41 PRECISION-COMPONENT 43 CXR-60/80/100 HIGH-POWER 43 F FA FD-100/110 AUTOMATIC SOLDER FEEDER 30 G GP-101S GAS-POWERED IRON 50 GP-501 GAS-POWERED IRON 50 GP-510 GAS-POWERED IRON 51 GP-510SET GAS-POWERED IRON SET 51 GSR series SMT REWORK REPAIR 66 GS series DE SUCKERS 82 H H-1S/1L/2SL HEAT CLIPS [HEAT SINK] 87 HB-45 MINI HOT BOND 96 HB-100S/200S HOT STICKS 97 HB-40S HOT STICKS 97 HB-80 HOT-BOND 96 HE-110 HOT SLICER 98 HOT-30R/60R HOT KNIVES 98 HP-150/200/300 SHEET-METAL 47 HRC-401 STAINED-GLASS IRON 44 HRC-80/100 STAINED-GLASS 44 4

5 K KS series GENERAL ELECTRONICS 46 KX series GENERAL ELECTRONICS 46 KYP-60/70 DUAL-POWER 48 M MI-6-6 V/MI-6-12 V LOW-VOLTAGE 48 N NC-100R N2 STATION 27 P PCB-1 PCB DIPPING HOLDER 58 POT-100C SOLDER POT [stainless bath] 59 POT-103C SOLDER POT [cast-iron bath] 59 POT-200C SOLDER POT [stainless bath] 59 POT-203C SOLDER POT [cast-iron bath] 59 POT-21C SOLDER POT [stainless bath] 60 POT-23C SOLDER POT [ceramic bath] 60 POT-28C SOLDER POT [cast-iron bath] 60 POT-400C SOLDER POT [cast-iron bath] 58 POT-50C SOLDER POT [cast-iron bath] 60 PX-201 TEMP-CONTROLLED IRON 38 PX-335/338/342 FIXED-TEMPERATURE 39 PX-401 TEMP-CONTROLLED IRON 38 PX-501AS/501 MINI 35 PX-601AS/601 CONTROLLERS 35 R R/RD/RB series RED TIPS / BLACK TIPS 49 RX-701AS/711AS 34 RX-812AS MICRO SOLDRING STATION 18 RX-802AS STATION 24 RX-802ASPH NITROGEN STATION 26 RX-822AS DUAL-PORT STATION 20 RX-852AS HIGH-POWER STATION 22 RX-892AS ULTRA HIGH POWER STATION 16 S SA-10 SOLDER ASSIST 86 SE series SPECIAL SPOOL-SOLDERS 93 SF series SOLDERS 93 SG series STARTER KIT (ELECTRONICS/CRAFT & HOBBY) 48 SS-60 AIR PURIFYING FUME VACUUM 84 ST-30/70 TIP CLEANERS 88 ST series IRON STANDS 88 ST-40 TIP CLEANER 88 ST-51/52/53 SOLDER REEL HOLDERS 89 ST-80 MINI VISE 89 ST-91/92/93 MAGNIFIERS 89 ST-200 PCB HOLDER 40 SVS-500AS SERVICE STATION 75 SVS-580AS SERVICE STATION 74 SVS-800AS SERVICE STATION 72 NEW NEW NEW T T series COPPER TIPS 49 TL-10/20 MAINTENANCE TOOL SETS 90 TM TM-100SU SENSOR UNIT 56 TM TP-100AS/100 PORTABLE DE GUNS 78 TP-200AS AUTOMATIC DE STATION 77 TP-280AS AUTOMATIC DE STATION 76 TQ-77/95 QUICK-HEAT 42 TS series PRECISION TWEEZERS 87 W WA-400 SURFACE RESISTIVITY METER 85 WD-13/130 ANTI-STATIC MATS 85 WG-1/2 series LOW-DUST GLOVES 86 WG-3/4 series ANTI-STATIC GLOVES 86 WS-11/12 WRIST STRAPS 85 X XFC-110 HOT-AIR REWORK STATION 62 XFC-210 HOT-AIR REWORK STATION 62 XFC-301/300 HOT-AIR REWORK STATIONS 62 XK-1/2 HANDPIECE HOLDERS 64 XPR-1000 PREHEATER 65 XPR-600 PREHEATER 65 XPR-610 PREHEATER 65 XRB series REBALL KIT 70 XST-80 TWEEZERS 68 XST-80G TWEEZERS UNIT 69 XU-1/1S BOARD HOLDERS 65 Y YN PRECISION NIPPERS 101 YN-1/3/4 HOBBY HAND TOOLS 100 YN mm PLATFORM NIPPERS 102 YN-10AS/13AS PRECISION NIPPERS 101 YN-215AS/220AS MANUAL DEPANELING TOOLS 100 YN-25AS/26AS/27AS SUPER CUTTERS 100 YN-300 AIR-POWERED DEPANELING TOOL 100 YP-1/3/4 HOBBY HAND TOOLS 100 YP-10 PRECISION NIPPERS 102 YP-201 CRIMPING PLIERS 102 YS-1 WIRE STRIPPER 103 YS-100/101 CABLE STRIPPER 103 YS-2/3 PRECISION WIRE STRIPPER 103 NEW SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 5

6 POWER CONSUMPTION AND SAFETY STANDARD MODEL Voltage Power Consumption CE Argentin Australia CS V, 220 V, 240 V 20 W CS-21/ V W CS-21/ V W CS V, 120 V, 220 V, 240 V 25 W CS-31/ V W CS-31/ V W CXR V, 120 V, V 22 W CXR-31/ V W CXR V, 120 V, V, 240 V 30 W CXR-41/ V W CXR-41/ V W CXR V, V 28 W V W CXR V, V 32 W V W CXR V, V 38 W V W HP V, 120 V, 220 V, 240 V 110 W HP V, 120 V, 220 V, 240 V 150 W HP V, 120 V, 220 V, 240 V 200 W KS-20R 110 V,120 V, 220 V 23 W 240 V 19 W KS-20R/ V W KS-20R/ V W KS-30R 110 V, 120 V, 220 V, 240 V 28 W KS-30R/ V W KS-30R/ V W KS-40R 110 V, 120 V, 220 V, 240 V 35 W KS-40R/ V W KS-40R/ V W KS-60R 110 V 37 W 120 V,220 V,240 V 45 W KS-60R/ V W KS-60R/ V W KS-80R 110 V 37 W 120 V,220 V,240 V 45 W KS-80R/ V W KS-80R/ V W KS-100R 110 V 37 W 120 V,220 V,240 V 45 W KS-100R/ V W KS-100R/ V W KX-20R 110 V,120 V, 220 V 23 W 240 V 19 W KX-20R/ V W KX-20R/ V W KX-30R 110 V, 120 V, 220 V, 240 V 28 W KX-30R/ V W KX-30R/ V W KX-40R 110 V, 120 V, 220 V, 240 V 35 W KX-40R/ V W KX-40R/ V W KX-60R 110 V 37 W 120 V,220 V,240 V 45 W KX-60R/ V W KX-60R/ V W KX-80R 110 V 37 W 120 V,220 V,240 V 45 W KX-80R/ V W KX-80R/ V W KX-100R 110 V 37 W 120 V,220 V,240 V 45 W KX-100R/ V W 6

7 MODEL Voltage Power Consumption CE Argentin Australia KX-100R/ V W KYP V 50 W 120 V, 220 V, 240 V 60 W KYP-60/ V W KYP-60/ V W KYP V 50 W 120 V, 220 V, 240 V 60 W KYP-70/ V W KYP-70/ V W MI-6-6 V 6 V 6 W 5-6 V D.C. 4-6 W MI-6-12 V 12 V 6 W V D.C. 5-6 W POT-21C 110 V, 120 V, 220 V, 240 V 130 W POT-21C/ V W POT-21C/ V W POT-23C 110 V, 120 V, 220 V, 240 V 130 W POT-23C/ V W POT-23C/ V W POT-28C 110 V, 120 V, 220 V, 240 V 130 W POT-28C/ V W POT-28C/ V W POT-100C 110 V, 120 V, 220 V, 240 V 440 W POT-100C/ V W POT-100C/ V W POT-200C 110 V, 120 V, 220 V, 240 V 650 W POT-200C/ V W POT-200C/ V W POT-103C V 900 W V 900 W POT-203C V 1400 W V 1400 W V W POT-50C V W V W PX V 70 W V 70 W V W PX V W V W V W PX V W V W V W PX V W V W FD V 8 W V 8 W TM V RX-701AS 110 V, 120 V, 220 V, 230 V, 240 V 65 W 220 V, 230 V, 240 V 65 W (240 V) RX-711AS 110 V, 120 V, 220 V, 230 V, 240 V 65 W 220 V, 230 V, 240 V 65 W (240 V) RX-802AS / 110 V, 120 V, 220 V, 230 V, 240 V 80 W RX-802ASPH 220 V, 230 V, 240 V 80 W RX-852AS V, V W V W RX-822AS V, V W V W SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 7

8 POWER CONSUMPTION AND SAFETY STANDARD MODEL Voltage Power Consumption CE Argentin Australia 110 V, 120 V 200 W SVS-500AS V W V W V 80 W TP V W V W V 80 W TP-100AS V W V W 110 V, 120 V 130 W TP-200AS V W V W V 15/150 W TQ V 20/200 W V W V 15/150 W TQ V 20/200 W V W V W XPR V W V W KORIA MODEL Voltage Power Consumption CS-21/ V AC 60 Hz 19 W CS-31/ V AC 60 Hz 21 W CXR V AC 60 Hz 22W CXR V AC 60 Hz 30W HOT-60R 220 V AC 60 Hz 45 W KX-40R/ V AC 60 Hz 35 W KX-60R/ V AC 60 Hz 45 W PX V AC 60 Hz 70 W RX-701AS 220 V AC 60 Hz 65 W RX-711AS 220 V AC 60 Hz 65 W RX-802AS 220 V AC 60 Hz 80 W RX-802ASPH 220 V AC 60 Hz 80 W RX-852AS 220 V AC 60 Hz 145 W SVS-500AS 220 V AC 60 Hz 270 W TP V AC 60 Hz 70 W TP-100AS 220 V AC 60 Hz 70 W TP-200AS 220 V AC 60 Hz 170 W TQ V AC 60 Hz 80 W TQ V AC 60 Hz 80 W 8

9 SOLDER FEEDER UNIT UNIT SLIDING UNIT SOLDER REEL HOLDER TIP CLEANER FA-1000 FA-1000FD FA-1000SD FA-1000SL FA-1000RH FA-1000CL SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 9 9

10 Economical Desktop Soldering System FA-1000 HEAD LEAD FREE Diagonal Driver Air cylinder drives tip diagonally. New Tip Release Function. (PAT.P) Only 30 seconds between removing and attaching. Easy and accurate replacement. SOLDER REEL HOLDER Solder Residue Run Out Function After the solder-finish sensor activates, the solder residue in the tube is used up. SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS Soldering System 导V-Groove Function Reduces solder balls splattering. The V-groove prevents slips, and supplies stable solder. The short distance from the tip produces a more accurate feed. *Please choose the suitable V-groove unit for your solder diameter. CONTROL UNIT Easy Touch Panel English, Japanese, Chinese and Spanish. Memory Card Function (optional) Multiple uses are easy and copiable by saving the data to the memory card. Up to 6 Tip Temperature Settings Different tip temperatures can be set for each soldering. Tip Temperature Monitor (optional) Shows analog voltage of 1-5 V of the tip temperature. Connecting to a data logger (on the market) helps to control the soldering temperature. *The robot main body is not included. For the robot, please refer to p.12 Economical and High Performance Tip Compact tip with integrated heater gives accurate tip temperature and better running cost (PAT.). In-house manufacturing for your custom needs. N2 gas system also available. Better soldering operation time and quality Operator and robot divide the work and operate simultaneously High efficiency/lower costs Does not rely on the operater's soldering skills High quality solderings 1 tact Manual Soldering Without robot With robot 入前Operator (Manual soldering) Operater does all work. Operator Operator in charge of assembling components. Robot 机器人 Robot 负责需要焊接能 is in charge of soldering 力的工作 components. Assembling the work Assembling the work Soldering Attaching the work to the jig Attaching the work to the jig Removing the work from the robot Moving the work to the robot Soldering Shorter Detaching from jig 10 mm Robot Soldering 10

11 FA-1000 series Units in Standard Configuration Soldering Unit FA-1000SD (Tip not included) Solder Feeder Unit FA-1000FD Control Unit FA-1000 Easy touch panel Memory card function (optional) Tip temperature monitor (optional) V-Groove Unit FA-1000 V Model FA-1000V-06 FA-1000V-08 FA-1000V-10 FA-1000V-12 FA-1000V-16 Solder Dia. Φ0.6 mm Φ0.8 mm Φ1.0 mm Φ1.2 mm Φ1.6 mm Brush Tip Cleaner FA-1000BC Air Blow Cleaner FA-1000CL Clog-Detection Unit FA-1000FDB Model Solder Dia. FA-1000FDB-06 Φ0.6 mm FA-1000FDB-10 Φ0.8 mm Φ1.0 mm FA-1000FDB-16 Φ1.2 mm Φ1.6 mm Solder Reel Holder FA-1000RH Solder-Finish Sensor Options REPLACEMENT TIPS 0.8 ø1.6 FA-10HRT-1.6D N2 Nozzle FA-1000PH To attach Air Blow Tip Cleaner, you need Fixing Plate for Air Blow Cleaner. FA-1000CLP1 : For small robot FA-1000CLP2 : For big robot Model Compatible Tips FA-1000PH-A 1.6SD 3.2SD FA-1000PH-B 2PC 4C 1.6D 0.8 W 1.2W FA-1000PH-C 3PC 2.4D 3.2D 3.2DV We have cheape N2 generator. Please refer to p ø2.4 FA-10HRT-2.4D ø3.2 FA-10HRT-3.2D ø FA-10HRT-4C 15 (3) 30 FA-10HRT-2PC 15 *Solder not included Diagonal Driver FA-1000SL Air cylinder drives tip diagonally ø FA-10HRT-0.8W ø FA-10HRT-1.2W SURFACE MOUNT / SMT DES 0.8 ø1.6 FA-10HRT-1.6SD (2.8) ø3.2 R0.75 FA-10HRT-3.2DV ø3.2 FA-10HRT-3.2SD (2) (2.8) 45 FA-10HRT-3PC HEATED TOOLS HAND TOOLS 11

12 Sample Robot Configuration Easy teaching by soldering program. Easy operating Teaching Pendant. Possible to adjust positioning by camera. (optional) SURFACE MOUNT / SMT DES 4-Axis Sample Robot Configuration Rated Voltage V, V AC 50/ 60 Hz Power Consumption W Dimensions 140(W) x 280(H)x 240(D)mm Control Unit FA-1000 Weight 8.6 kg Number of Soldering Programs 256 programs Tip Temperature Range C Tip Temperature Preset 6 settings Input Air Pressure MPa Solder Feeder Unit FA-1000FD Solder Diameter ø0.6 (ø0.65) ø0.8 ø1.0 ø1.2 ø1.6 mm Length 145 mm Soldering Unit FA-1000SD Weight Approx. 950 g (Solder Feeder Unit included) Voltage/ Power 24 V/ 150 W Specifications (Robot) Model FA-V2203 FA-V2303 FA-2204N FA-2304N FA-2404N Axis Type 3-axis 4-axis Shape Cantilever type Gate type Cantilever type Gate type Cantilever type Operating Range X, Y -axis mm mm mm mm mm Z -axis *Height B 50 mm 100 mm 50 mm 100 mm 150 mm R -axis (-)90 (+)90 Hight from tip to X Axis stage *Height A Maximum Speed Repeatability 88 mm 183 mm 88 mm 183 mm 183 mm X,Y -axis 500 mm/ s 700 mm/ s 800 mm/ s Z -axis 200 mm/ s 250 mm/ s 320 mm/ s R -axis 600 / s 800 / s X, Y, Z -axis ±0.01 mm ±0.01 mm R -axis ±0.008 Teaching pendant or PC Teaching Method Program Capacity 255 Maximum Soldering Points 30,000 3-Axis Sample Robot Configuration Specifications (Control Unit/ Solder Feeder Unit/ Soldering Unit) Specifications may change without notice. IAI Corp. Desktop robot is also available. Teaching Pendant SENSOR UNIT TM-100SU Dual Head Configuration Positioning Camera (Optional) FOR YOUR BETTER TEMPERATURE CONTROL p.48 A B TM-100 p Diagonal Driver Stroke HEATED TOOLS HAND TOOLS REPLACEMENT PARTS / OPTIONS Robot Mounting Block Exclusive blocks to mount FA-1000SD, FD to robot. FA-N Robot Mounting Block FA-V Robot Mounting Block FA-1000J4BL FA-1000J3BL FA-TT, FA-TTA Robot Mounting Block FA-1000ABL Teaching Pendant 4-Axis Robot Teaching Pendant FA-JRN-TP 3-Axis Robot Teaching Pendant FA-JRV-TP Air Blow Cleaner Filters Air Blow Filter (10 pcs. included) FA-1000CLF PC Software PC Software for Robot (Common to 4-Axis and 3-Axis.) FA-JRN-PC Brush for Brush Tip Cleaner Brush Cleaner (2 pcs. included) FA-1000BU Solder-Nozzle Tube ø0.6 mm (5 pcs. included) ø0.8 mm (5 pcs. included) FA-1000N-06 FA-1000N-08 ø1.0 mm (5 pcs. included) ø1.2 mm (5 pcs. included) FA-1000N-10 FA-1000N-12 ø1.6 mm (5 pcs. included) FA-1000N-16 X-Axis stage FA-1000BU FA-1000CLF FA-1000N 12

13 ULTRA HIGH POWER TEMPERATURE CONTROLLED STATION TEMPERATURE-CONTROLED MICRO SOLDRING STATION RX-892AS RX-812AS TEMPERATURE-CONTROLED DUAL-PORT STATION TEMPERATURE-CONTROLED TEMPERATURE-CONTROLED NITROGEN STATION N2 STATION AUTOMATIC SOLDER FEEDER RX-822AS RX-852AS RX-802AS RX-802ASPH NC-100R FD-110 FD-100 SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 13 13

14 150 W /80 W Dual-port soldering station RX-822AS Pictured tips not included. p.16 2 soldering irons can be used. REPLACEMENT PARTS/ OPTIONS Soldering Tester / Tip Thermometer p.56 p.54 TM W Excellent heat recovery station RX-852AS Pictured tips not included. p.22 TM-200 Automatic Solder Feeder p.30 FD-110/100 STANDARD CONFIGURATION 150 W High-heat capacity Iron Unit (included) Can support two 80W iron units 150 W High-heat capacity Iron Unit (included) RX-85GAS *Cannot support double 150 W irons. RX-80GAS (Extra RX-80GAS Sold separately) p.25 Applicable tips (Standard Configuration) Handpiece Grip Rubber (Anti-static) For quick identification of soldering tasks or types. RX-80RB : gray RX-80RB-BK : black RX-80RB-GR : green RX-80RB-OR : orange 80 W Standard Iron Unit (included) STANDARD CONFIGURATION RX-85GAS Can support 80 W stadnard iron unit RX-80GAS (Sold separately) RX-80GAS Can support micro-soldering iron Micro-soldering Applicable Iron Unit Can support hot tweezers XST-80G (Sold separately) RX-80HRT series, RX-85H(S)RT series Soldering Iron Stand Sponge/Cleaner ST-53SP p.25 ST-40BW RX-81GAS (Sold separately) p.69 p.88 Soldering Tweezers Stand Can support micro-soldering iron Micro-soldering Applicable Iron Unit RX-81GAS (Sold separately) Can support hot tweezers XST-80G (Sold separately) p.69 p.88 p.19 p.19 ST-28 SURFACE MOUNT / SMT REPLACEMENT PARTS/ OPTIONS Soldering Tester / Tip Thermometer Automatic Solder Feeder p.56 p.54 FD-110/100 Applicable tips (Standard Configuration) Handpiece Grip Rubber (Anti-static) For quick identification of soldering tasks or types. RX-85H(S)RT series Soldering Iron Stand Sponge/Cleaner ST-53SP p.88 Soldering Tweezers Stand ST-28 DES TM-100 TM-200 p.30 RX-80RB : gray RX-80RB-BK : black RX-80RB-GR : green RX-80RB-OR : orange ST-40BW p.88 HEATED TOOLS 500 W Ultra high power soldering station RX-892AS Pictured tips not included. p.16 Great high recovery from world's first high-density 500 W heater in combination with our original sensitive sensor. We will shock you. REPLACEMENT PARTS/ OPTIONS Soldering Tester / Tip Thermometer p.56 p.54 Soldering Iron Stand Sponge/Cleaner ST-53SP p.88 NEW HAND TOOLS TM-100 TM-200 ST-40BW 14

15 80 W Ultimate solution for lead-free soldering RX-802AS Pictured tips not included. p.24 REPLACEMENT PARTS/ OPTIONS Soldering Tester / Tip Thermometer p.56 p.54 TM-100 Solder or desolder small parts in small space RX-812AS Nitrogen improves solder wetting and fillet shape RX-802ASPH Automatic Solder Feeder REPLACEMENT PARTS/ OPTIONS Soldering Tester / Tip Thermometer TM-100 REPLACEMENT PARTS/ OPTIONS Soldering Tester / Tip Thermometer TM-100 TM-200 Pictured tips not included. p.56 TM-200 Pictured tips not included. A Nitrogen gas generator is required p.56 p.18 p.26 p.54 p.54 TM seconds to set temperature. p.30 Very thin grip. Handpiece Grip Rubber (Anti-static) For quick identification of soldering tasks or types. RX-80RB : gray RX-80RB-BK : black RX-80RB-GR : green RX-80RB-OR : orange N2 generator NC-100R FD-110/100 Applicable tips (Standard Configuration) Handpiece Grip Rubber (Anti-static) For quick identification of soldering tasks or types. RX-80RB : gray RX-80RB-BK : black RX-80RB-GR : green RX-80RB-OR : orange NEW Applicable tips (Standard Configuration) Soldering Iron Stand Sponge/Cleaner ST-53SP Nitrogen improves solder wetting and fillet shape. p.27 STANDARD CONFIGURATION N2 Gas Adaptive Iron Unit (included) Can support 80W standard Iron Unit RX-80GAS (Sold separately) Applicable tips (Standard Configuration) Handpiece Grip Rubber (Anti-static) For quick identification of soldering tasks or types. RX-80RB : gray RX-80RB-BK : black RX-80RB-GR : green RX-80RB-OR : orange STANDARD CONFIGURATION 80 W Standard Iron Unit (included) ST-40BW RX-80GAS RX-80HRT series Soldering Iron Stand Sponge/Cleaner ST-53SP STANDARD CONFIGURATION Micro-soldering Applicable Iron Unit (included) p.88 cannot be used as a N2 soldering iron. RX-81GAS ST-40BW RX-81HRT series Soldering Tweezers Stand p.88 ST-28 RX-80HRT-PH series Soldering Iron Stand Sponge/Cleaner ST-53SP RX-80GASPH p.88 p.25 p.69 Can support micro-soldering iron Micro-soldering Applicable Iron Unit RX-81GAS (Sold separately) p.19 ST-40BW Can support hot tweezers XST-80G (Sold separately) p.69 Soldering Tweezers Stand p.88 Can support micro-soldering iron Micro-soldering Applicable Iron Unit RX-81GAS (Sold separately) cannot be used as a N2 soldering iron. Can support hot tweezers XST-80G (Sold separately) cannot be used as a N2 soldering iron. p.19 ST-28 Can support 80 W StandardIron Unit 80 W Standard Iron Unit RX-80GAS (Sold separately) p.25 Can support hot tweezers XST-80G (Sold separately) p.69 p.88 Soldering Tweezers Stand p.88 ST-28 SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 15

16 Trouble with heavy-duty and high-capacity parts? ULTRA HIGH POWER TEMPERATURE CONTROLLED STATION RX-892AS World-Beating 500 W World's only 500 W station with digital temperature control *Based on original research. 100 V V Applicable Good for many voltages ANTI LEAD STATIC FREE NEW Shielded boxes and cases Thick cable parts CALIBRATION SERVICES We provide calibration and/or certification for a fee. Tip not included. SURFACE MOUNT / SMT DES Unprecedented Tip-Temperature Recovery Features Great high recovery from world s first high-density 500 W heater in combination with our original sensitive sensor. We will shock you! Time to Presolder 22 mm 2 Cable RX-852AS (Our High Watt Station) 32s Multi-Voltage Accepts 100 V V. Adaptable and worry-free. Revolutionary Functions Advanced intelligent features in standard installation. RX-892AS (This Model) 16s Grip is Light and Nimble 90% lighter than standard 500 W sheet metal irons. Light enough to use on PCBs. Will save your hands from repetitive strain. Grip does not get too hot, either. HEATED TOOLS INCLUDED Control Unit Iron Unit RX-89GAS Soldering Iron Stand ST-29 HAND TOOLS Tip is not included Brass Wool & Sponges included 16

17 PRODUCT / FUNCTIONS TIP-TEMPERATURE RECOVERY FEATURES ( C) Soldering tip temperatrue Five consecutive solderings on 22 mm 2 cable 0 An alarm sounds when the temperature goes above or below temperature settings. High/low setting range C. Automatically lowers the temperature when the iron is not in use, during a preset period of time. Prevents tip oxidation and excess heating. Can be used with Shutdown function. SLEEP FUNCTION RELEASE (PAT.) Sleep mode can be exited (at any time) by touching a wet sponge with the tip to cause temperature fluctuation. (Effective when temperature is set above 100 C) Shutdown Function Operation Power ON DIF DIF SUT Set temperature Power OFF Time Soldering tip temperatrue Operation Power ON DIF DIF CT SST Set temperature Sleep start Time When using together with Sleep function. Soldering tip temperatrue Set at 500 C with tip RX-89HRT- 15D HIGH/LOW TEMPERATURE ALARM Operation Power ON DIF DIF CT SUT Set temperature Sleep setting temp. Power OFF When the unit is not used during the preset time, the unit automatically shuts down. Great when you forget to turn the power off. L Lower limit Set temperature Upper limit INTELLIGENT SLEEP FUNCTION (PAT.) MODE: Sleep function ON/OFF CT: Sleep start time SST: Sleep set temperature DIF: Sleep sensitivity Each parameter can be set. SHUTDOWN FUNCTION (s) H Time ALARM FUNCTION (PAT.) (1) Soldering time countdown (AT) starts when the tip is applied to the component. (The tip temperature goes outside DIF) (2) The alarm sounds after the preset countdown. (The display flashes twice) (3) Operator takes the tip off the component. KEY LOCK (PAT.) Lock with password. No tools or card necessary. Model Voltage Power Consumption Power Cord Length Temperature Setting Range Ripple temperature Insulation Resistance Applicable Iron Units Accessories Control Unit Output Voltage Dimensions Weight Iron Unit Model Iron Unit Voltage / Consumption Ground Resistance Cord Length Length Weight Tip temperatrue Power ON 1 DIF DIF AT 2 3 RX-892AS V AC 50/ 60 Hz W 1.5 m inlet type C ±5 C (unloaded) Over 100 MΩ (500 V DC) RX-89GAS Iron Unit (RX-89GAS) Soldering Iron Stand (ST-29) Set temperature 40 V DC 136 (W) 240 (H) 184 (D) mm 4.3 kg Time RX-89GAS 500 W Super High-Power Iron Unit 40 V DC / 500 W Less than 2 Ω 1.8 m 232 mm (with RX-89HRT-15D) 110 g (with RX-89HRT-15D) *The length does not include the cord bushing. The weight does not include the cord. For replacement tips, refer to p. 29 CALIBRATION The calibration function digitally offsets the difference between the tip temperature and the temperature shown by a tip thermometer being used. SURFACE MOUNT / SMT DES REPLACEMENT PARTS / OPTIONS Iron Unit Soldering Iron Stand Sponge Soldering Iron Stand Cleaner RX-89GAS ST-53SP ST-40BW Tip is not included (2pcs/set) HEATED TOOLS HAND TOOLS 17

18 Solder or desolder small parts in small spaces. NEW TEMPERATURE-CONTROLED MICRO SOLDRING STATION RX-812AS RX-812AS package uses Lead-Free Soldering Station RX-802AS. ANTI LEAD STATIC FREE VERY THIN GRIP Improved handling and visibility. FASTEST IN ITS CLASS 4 seconds to set temperature Tip not included. CALIBRATION SERVICES We provide calibration and/or certification for a fee. SURFACE MOUNT / SMT DES Ergonomic Grip Design New grip is designed for and adapted to ø2.9 mm superfine tip. Fastest in Its Class Reaches set temperature within 4 seconds after turning power on. Wide Variety of Replacement Tips 80 W RX-80HRT Tips also available instead of RX-81HRT tip. Tip Replacement without Tools (PAT.) Slide-change tip. Easy to replace a hot tip without any other tools. Thick Tip Coating for Lead-free Soldering All tips have extra-thick iron plating, to resist erosion by leadfree solder. HOW TO CHANGE TIPS Slide the lever in the direction of the arrow. The tip will come out. Hold and pull the plastic housing of the tip. Tip Hold here Slide lever HEATED TOOLS INCLUDED Control Unit Iron Unit RX-81GAS Soldering Iron Stand ST-22 HAND TOOLS Tip is not included Brass Wool & Sponges included 18

19 PRODUCT / FUNCTIONS RX-812AS reaches 350 C in only 3.7 seconds, and 450 C in 4.9 seconds. Fastest heating in its class. ( C) HEATING 4.9 seconds to 450 C 3.7seconds to 350 C 2.6 seconds to 250 C ALARM FUNCTION (PAT.) (1) Soldering time countdown (AT) starts when the tip is applied to the component. (The tip temperature goes outside DIF) (2) The alarm sounds after the preset countdown. (The display flashes twice) (3) Operator takes the tip off the component. Tip temperatrue Power ON 1 DIF DIF AT 2 3 Set temperature Time Shutdown Function Soldering tip temperatrue Operation Power ON DIF DIF SUT 50 HIGH/LOW TEMPERATURE ALARM An alarm sounds when the temperature goes above or below temperature settings. High/low setting range C. Automatically lowers the temperature when the iron is not in use, during a preset period of time. Prevents tip oxidation and excess heating. Can be used with Shutdown function. SLEEP FUNCTION RELEASE (PAT.) Sleep mode can be exited (at any time) by touching a wet sponge with the tip to cause temperature fluctuation. (Effective when temperature is set above 100 C) Set temperature Power OFF Time Soldering tip temperatrue Operation Power ON DIF DIF CT SST Set temperature Sleep start Time When using together with Sleep function. Soldering tip temperatrue Operation Power ON DIF DIF CT SUT Set temperature Sleep setting temp. Power OFF When the unit is not used during the preset time, the unit automatically shuts down. Great when you forget to turn the power off. L Lower limit Set temperature Upper limit INTELLIGENT SLEEP FUNCTION (PAT.) MODE: Sleep function ON/OFF CT: Sleep start time SST: Sleep set temperature DIF: Sleep sensitivity Each parameter can be set. SHUTDOWN FUNCTION REPLACEMENT PARTS / OPTIONS 0 with tip RX-81HRT- B H Time Model Voltage Power Consumption Power Cord Length Temperature Setting Range Ripple temperature Insulation Resistance Applicable Iron Units Control Accessories Unit Control Unit Output Voltage Dimensions Weight Micro Iron Unit 80 W Iron Unit Soldering Iron Stand Sponge Soldering Iron Stand Cleaner RX-81GAS RX-80GAS ST-53SP ST-40BW (s) KEY LOCK (PAT.) Lock with password. No tools or card necessary. CALIBRATION (PAT.) The calibration function digitally offsets the difference between the tip temperature and the temperature shown by a tip thermometer being used. RX-812AS 110 V, 120 V, 220 V, 230 V, 240 V AC 50/ 60 Hz 80 W 1.2 m C ±5 C (unloaded) Over 100 MΩ (500 V DC) Micro-Iron Unit RX-81GAS (included) 80 W Iron Unit RX-80GAS (sold separately) Soldering Tweezers Unit XST-80 (sold separately) Iron Unit (RX-81GAS) Soldering Iron Stand (ST-22) 24 V AC 116 (W) 105 (H) 194 (D) mm 4.8 kg Iron Unit Model RX-81GAS Iron Unit Micro-Iron Unit Voltage / Consumption 24 V AC / 72 W Ground Resistance Less than 2 Ω Leak Voltage Less than 2 mv Nichrome heater Cord Length 1.2 m Length 149 mm (with RX-81HRT-SB) Weight 25 g (with RX-81HRT-SB) Equivalent to IPC/EIA J-STD-001C *The length does not include the cord bushing. The weight does not include the cord. For replacement tips, refer to p. 28 For Soldering Tweezers XST-80G, refer to p. 69 NEW ERGONOMIC GRIP (PAT.) Prevents fatigue. Flexible cord, and a shorter distance from the handpiece to the tip. SURFACE MOUNT / SMT DES Accessories Tip is not included Tip is not included (2pcs/set) HANDPIECE GRIP RUBBER (Anti-static) For quick identification of soldering tasks or types. RX-80RB : gray RX-80RB-GR : green RX-80RB-BK : black RX-80RB-OR : orange Applicable Iron Unit : RX-80GAS/ RX-85GAS/ RX-81GAS with RX-80RB HEATED TOOLS HAND TOOLS 19

20 2 soldering irons can be used.,, DUAL-PORT STATION RX-822AS ANTI LEAD STATIC FREE New Soldering Iron Stand More stable, better operation Tips not included. CALIBRATION SERVICES We provide calibration and/or certification for a fee. SURFACE MOUNT / SMT DES 2 Soldering Irons can Be Used Can be prepared with 2 soldering irons. Allows different types of work [such as micro soldering / high power work (150 W)] at the same time. Two RX-85GAS (150 W) irons cannot be used together. Individual Temperature Setting Independent displays make settings clear. Enables Reworking of Chip Parts Allows you to rework chip parts using 2 tips at a time. Advanced Functions (PAT.) Equipped with intelligent functions (sleep, sleep release, shutdown and Key lock) based on the RX-802AS. Easy-to-Use Handpiece (PAT.) Easy to replace a hot tip without any other tools. Good for long hours of work with light, well-insulated structure. Wide Variety of Tips More than 40 tips are available. HOW TO CHANGE TIPS Slide the lever in the direction of the arrow. The tip will come out. Hold and pull the plastic housing of the tip. Tip Hold here Slide lever HEATED TOOLS INCLUDED Control Unit Iron Unit 1 RX-85GAS Iron Unit 2 RX-80GAS Soldering Iron Stands ST-22 HAND TOOLS Tip is not included Tip is not included Brass Wool & Sponges included 20

21 PRODUCT / FUNCTIONS An alarm sounds when the temperature goes above or below temperature settings. High/low setting range C. Automatically lowers the temperature when the iron is not in use, during a preset period of time. Prevents tip oxidation and excess heating. Can be used with Shutdown function. SLEEP FUNCTION RELEASE (PAT.) Sleep mode can be exited (at any time) by touching a wet sponge with the tip to cause temperature fluctuation. (Effective when temperature is set above 100 C) Shutdown Function Soldering tip temperatrue TIP-TEMPERATURE RECOVERY FEATURES TIP1 ( C) Operation Power ON Operation With RX-85HRT-5D (min.) DIF DIF SUT Set temperature Power OFF Time TIP2 ( C) 350 Soldering tip temperatrue Operation Power ON DIF DIF CT SST Set temperature Sleep start Time When used together with Sleep function. Soldering tip temperatrue Operation Power ON DIF DIF REPLACEMENT PARTS / OPTIONS CT SUT Set temperature Sleep setting temp. Power OFF When the unit is not used during the preset time, the unit automatically shuts down. Great when you forget to turn the power off (min.) L Operation With RX-80HRT-5.4D A generous amount of lead-free solder on a land of 20 mm dia. dissolving 35 points in succession at 350 C. HIGH/LOW TEMPERATURE ALARM Lower limit Set temperature Upper limit INTELLIGENT SLEEP FUNCTION (PAT.) MODE: Sleep function ON/OFF CT: Sleep start time SST: Sleep set temperature DIF: Sleep sensitivity Each parameter can be set. SHUTDOWN FUNCTION H Time KEY LOCK (PAT.) Lock with password. No tools or card necessary. Model Voltage Power Consumption Power Cord Length Temperature Setting Range Insulation Resistance Ripple temperature Applicable Iron Units Accessories Control Unit Output Voltage Dimensions Weight Iron Unit CALIBRATION (PAT.) The calibration function digitally offsets the difference between the tip temperature and the temperature shown by a tip thermometer being used. NEW ERGONOMIC GRIP (PAT.) Prevents fatigue. Flexible cord, and a shorter distance from the handpiece to the tip. RX-822AS V, V AC 50/ 60 Hz W 1.5 m inlet type C Over 100 MΩ (500 V DC) ± 5 C (unloaded) 150 W High-heat-capacity Iron Unit *RX-85GAS (included) 80 W Standard Iron Unit RX-80GAS (included) Micro-Iron Unit RX-81GAS (sold separately) Soldering Tweezers Unit XST-80 (sold separately) Iron Unit (RX-85GAS, RX-80GAS) Soldering Iron Stand (ST-22) 2 *Two RX-85GAS (150 W) irons cannot be used together. 24 V AC 116 (W) 105 (H) 194 (D) mm 4.9 kg Model RX-80GAS RX-85GAS Iron Unit 80 W Standard Iron Unit 150 W High-heat-capacity Iron Unit Voltage/Consumption 24 V AC / 72W 24 V AC / 72 W 150 W Ground Resistance Less than 2 Ω Leak Voltage Less than 2 mv Nichrome heater Cord Length 1.2 m 1.5 m Length 158 mm(with RX-80HRT-B) 174 mm(withrx-85hrt-5d) Weight 28 g (with RX-80HRT-B) 39 g (with RX-85HRT-5D) Equivalent to IPC/EIA J-STD-001C *The length does not include the cord bushing. The weight does not include the cord. For replacement tips, refer to p. 28 & p. 29 For Soldering Tweezers XST-80G, refer to p. 69 RX-852AS Iron Unit RX-802AS Iron Unit RX-812AS Iron Unit Soldering Iron Stand Sponge Soldering Iron Stand Cleaner Flux Guard Rubber RX-85GAS RX-80GAS RX-81GAS ST-53SP ST-40BW RX-80P SURFACE MOUNT / SMT DES Accessories Tip is not included Tip is not included Tip is not included (2pcs/set) HANDPIECE GRIP RUBBER (Anti-static) For quick identification of soldering tasks or types. RX-80RB : gray RX-80RB-GR : green RX-80RB-BK : black RX-80RB-OR : orange Applicable Iron Unit : RX-80GAS/ RX-85GAS/ RX-81GAS with RX-80P with RX-80RB HEATED TOOLS HAND TOOLS 21

22 Phenomenal heat recovery with 150 W compact high-output heater. STATION RX-852AS ANTI LEAD STATIC FREE New Soldering Iron Stand More stable, better operation Tip not included. CALIBRATION SERVICES We provide calibration and/or certification for a fee. SURFACE MOUNT / SMT DES HEATED TOOLS Excellent Heat Recovery (PAT.) Up to 22 mm² copper wire can be soldered. Excellent heat recovery has been achieved by combining a 150 W compact high-output heater with a high-sensitivity sensor. Fastest in Its Class Reaches 350 C in only 14 seconds. (Only 6 seconds when using RX-80HRT tips.) Light and Compact Handpiece Same size as the RX-80GAS. Tip Replacement without Tools (PAT.) Slide-change tip. Easy to replace a hot tip without any other tools. INCLUDED Control Unit Iron Unit RX-85GAS Soldering Iron Stand ST-22 Thick Tip Coating for Lead-free Soldering All tips have extra-thick iron plating, to resist erosion by lead-free solder. RX-80HRT Tips also Available More than 40 tips are available, including the RX-80HRT tips. HOW TO CHANGE TIPS Slim tips now added to line-up. Slide the lever in the direction of the arrow. The tip will come out. Hold and pull the plastic housing of the tip. Tip Hold here HAND TOOLS Slide lever Tip is not included Brass Wool & Sponges included 22

23 PRODUCT / FUNCTIONS ( C) TIP-TEMPERATURE RECOVERY FEATURES Soldering efficiency increased by 39%! Tip Temperature Stability RX-802AS Amount of time required : 10 min.10 s (min.) A generous amount of lead-free solder on a land of 20 mm dia. dissolving 35 points in succession at 350 C. Soldering tip temperatrue Power ON ( C) Tip Temperature Stability RX-852AS Amount of time required : 7min. 20 s (min.) Shortens soldering time significantly, and the tip temperature is more stable. HIGH/LOW TEMPERATURE ALARM An alarm sounds when the temperature goes above or below temperature settings. High/low setting range C. Automatically lowers the temperature when the iron is not in use, during a preset period of time. Prevents tip oxidation and excess heating. Can be used with Shutdown function. SLEEP FUNCTION RELEASE (PAT.) Sleep mode can be exited (at any time) by touching a wet sponge with the tip to cause temperature fluctuation. (Effective when temperature is set above 100 C) Shutdown Function Operation DIF DIF SUT Set temperature Power OFF Time Soldering tip temperatrue Operation Power ON DIF DIF CT SST Set temperature Sleep start Time When using together with Sleep function. Soldering tip temperatrue Operation Power ON DIF DIF REPLACEMENT PARTS / OPTIONS CT SUT Set temperature Sleep setting temp. Power OFF When the unit is not used during the preset time, the unit automatically shuts down. Great when you forget to turn the power off. L Lower limit Set temperature Upper limit INTELLIGENT SLEEP FUNCTION (PAT.) MODE: Sleep function ON/OFF CT: Sleep start time SST: Sleep set temperature DIF: Sleep sensitivity Each parameter can be set. SHUTDOWN FUNCTION H Time ALARM FUNCTION (PAT.) (1) Soldering time countdown (AT) starts when the tip is applied to the component. (The tip temperature goes outside DIF) (2) The alarm sounds after the preset countdown. (The display flashes twice) (3) Operator takes the tip off the component. KEY LOCK (PAT.) Lock with password. No tools or card necessary. Model Voltage Power Consumption Power Cord Length Temperature Setting Range Ripple temperature Insulation Resistance Applicable Iron Units Accessories Control Unit Output Voltage Dimensions Weight Tip temperatrue CALIBRATION (PAT.) Power ON The calibration function digitally offsets the difference between the tip temperature and the temperature shown by a tip thermometer being used. For replacement tips, refer to p. 28 & p DIF DIF AT 2 3 Set temperature 24 V AC 116 (W) 105 (H) 194 (D) mm 4.8 kg Time NEW ERGONOMIC GRIP (PAT.) Prevents fatigue. Flexible cord, and a shorter distance from the handpiece to the tip. RX-852AS V, V AC 50/ 60 Hz W 1.5 m inlet type C ±5 C (unloaded) Over 100 MΩ (500 V DC) 150 W High-heat-capacity Iron Unit RX-85GAS (included) 80 W Standard Iron Unit RX-80GAS (sold separately) Micro-Iron Unit RX-81GAS (sold separately) Soldering Tweezers Unit XST-80 (sold separately) Iron Unit (RX-85GAS) Soldering Iron Stand (ST-22) Iron Unit Model RX-85GAS Iron Unit 150 W High-heat-capacity Iron Unit Voltage/Consumption 24 V AC / 150 W Ground Resistance Less than 2 Ω Leak Voltage Less than 2 mv Nichrome heater Cord Length 1.5 m Length 174 mm(with RX-85HRT-5D) Weight 39 g (with RX-85HRT-5D) Equivalent to IPC/EIA J-STD-001C *The length does not include the cord bushing. The weight does not include the cord. For Soldering Tweezers XST-80G, refer to p. 69 RX-852AS Iron Unit RX-802AS Iron Unit RX-812AS Iron Unit Soldering Iron Stand Sponge Soldering Iron Stand Cleaner Flux Guard Rubber RX-85GAS RX-80GAS RX-81GAS ST-53SP ST-40BW RX-80P SURFACE MOUNT / SMT DES Accessories Tip is not included Tip is not included Tip is not included (2pcs/set) For quick identification of soldering tasks or types. RX-80RB : gray RX-80RB-BK : black HANDPIECE GRIP RUBBER (Anti-static) RX-80RB-GR : green RX-80RB-OR : orange Applicable Iron Unit : RX-80GAS/ RX-85GAS/ RX-81GAS with RX-80P with RX-80RB HEATED TOOLS HAND TOOLS 23

24 6 seconds to set temperature. The ultimate solution for lead-free soldering. STATION RX-802AS ANTI LEAD STATIC FREE New Soldering Iron Stand More stable, better operation Tip not included. CALIBRATION SERVICES We provide calibration and/or certification for a fee. SURFACE MOUNT / SMT DES Excellent Heat Recovery (PAT.) There is almost no temperature fluctuation during continuous operation. Good for lead-free soldering. Fastest in Its Class Reaches set temperature in just 6 seconds after turning power on. Tip Replacement without Tools (PAT.) Slide-change tip. Easy to replace a hot tip without any other tools. Reduced Grip Heat (PAT.) Patented thermal-insulation grip permits comfortable and safe work. Thick Tip Coating for Lead-free Soldering All tips have extra-thick iron plating, to resist erosion by leadfree solder. HOW TO CHANGE TIPS Slide the lever in the direction of the arrow. The tip will come out. Hold and pull the plastic housing of the tip. Tip Hold here Slide lever HEATED TOOLS INCLUDED Control Unit Iron Unit RX-80GAS HAND TOOLS Soldering Iron Stand ST-22 Tip is not included Brass Wool & Sponges included 24

25 PRODUCT / FUNCTIONS Soldering tip temperatrue TIP-TEMPERATURE RECOVERY FEATURES The tip temperature remains close to set temperature even during heavy load work. An alarm sounds when the temperature goes above or below temperature settings. High/low setting range C. Automatically lowers the temperature when the iron is not in use, during a preset period of time. Prevents tip oxidation and excess heating. Can be used with Shutdown function. SLEEP FUNCTION RELEASE (PAT.) Sleep mode can be exited (at any time) by touching a wet sponge with the tip to cause temperature fluctuation. (Effective when temperature is set above 100 C) Shutdown Function Operation Power ON DIF DIF SUT ( C) HIGH/LOW TEMPERATURE ALARM Set temperature Power OFF Time (sec.) Soldering tip temperatrue Operation Power ON DIF DIF CT SST Set temperature Sleep start Time When using together with Sleep function. Soldering tip temperatrue Operation Power ON During work Even during continuous heavy load work the temperature of the soldering iron tip remains close to the set temperature. DIF DIF CT SUT Set temperature Sleep setting temp. Power OFF When the unit is not used during the preset time, the unit automatically shuts down. Great when you forget to turn the power off. L Lower limit Set temperature Upper limit INTELLIGENT SLEEP FUNCTION (PAT.) MODE: Sleep function ON/OFF CT: Sleep start time SST: Sleep set temperature DIF: Sleep sensitivity Each parameter can be set. SHUTDOWN FUNCTION REPLACEMENT PARTS / OPTIONS H Time ALARM FUNCTION (PAT.) (1) Soldering time countdown (AT) starts when the tip is applied to the component. (The tip temperature goes outside DIF) (2) The alarm sounds after the preset countdown. (The display flashes twice) (3) Operator takes the tip off the component. KEY LOCK (PAT.) Lock with password. No tools or card necessary. Model Voltage Power Consumption Power Cord Length Temperature Setting Range Ripple temperature Insulation Resistance Applicable Iron Units Accessories Control Unit Output Voltage Dimensions Weight Iron Unit Model Iron Unit Voltage/Consumption Ground Resistance Leak Voltage Cord Length Length Weight Tip temperatrue CALIBRATION (PAT.) Power ON The calibration function digitally offsets the difference between the tip temperature and the temperature shown by a tip thermometer being used. For replacement tips, refer to p DIF DIF AT 2 3 Set temperature Time NEW ERGONOMIC GRIP (PAT.) Prevents fatigue. Flexible cord, and a shorter distance from the handpiece to the tip. RX-802AS 110 V, 120 V, 220 V, 230 V, 240 V AC 50/ 60 Hz 80 W 1.2 m inlet type C ±5 C (unloaded) Over 100 MΩ (500 V DC) 80 W Standard Iron Unit RX-80GAS (included) Micro-Iron Unit RX-81GAS (sold separately) Soldering Tweezers Unit XST-80 (sold separately) Iron Unit (RX-80GAS) Soldering Iron Stand (ST-22) 24 V AC 115 (W) 98 (H) 146 (D) mm 1.8 kg RX-80GAS 80 W Standard Iron Unit RX-80GAS 24 V AC / 72 W Less than 2 Ω Less than 2 mv Nichrome heater 1.2 m 158 mm (with RX-80HRT-BM) 28 g (with RX-80HRT-BM) Equivalent to IPC/EIA J-STD-001C *The length does not include the cord bushing. The weight does not include the cord. For Soldering Tweezers XST-80G, refer to p. 69 RX-802AS Iron Unit RX-812AS Iron Unit Soldering Iron Stand Sponge Soldering Iron Stand Cleaner Flux Guard Rubber RX-80GAS RX-81GAS ST-53SP ST-40BW RX-80P SURFACE MOUNT / SMT DES Accessories Tip is not included Tip is not included HANDPIECE GRIP RUBBER (Anti-static) For quick identification of soldering tasks or types. RX-80RB : gray RX-80RB-GR : green RX-80RB-BK : black RX-80RB-OR : orange Applicable Iron Unit : RX-80GAS/ RX-85GAS/ RX-81GAS (2pcs/set) with RX-80P with RX-80RB HEATED TOOLS HAND TOOLS 25

26 Nitrogen improves solder wetting and fillet shape. NITROGEN STATION RX-802ASPH ANTI LEAD STATIC FREE NOTE Preheat effect cannot be achieved by the RX-802ASPH alone. A Nitrogen gas generator is required. We recommend our NC-100R N2 station. SURFACE MOUNT / SMT DES New Soldering Iron Stand More stable, better operation Tip not included. CALIBRATION SERVICES We provide calibration and/or certification for a fee. All-in-one N2 Nozzle Tips (PAT.) Each RX-80HRT tip is equipped with a slim N2 nozzle. Slim N2 Nozzles φ6.4 mm slim N2 nozzles. Get into small spaces easily. Light and Easy-to-use Handpiece Handpiece weighs only 33 g. So light it s hard to believe it s for a Nitrogen station! Flexible N2 Induction Tube Super-flexible. Allows free maneuvering of handpiece. Special Tool for Easy Tip Replacement Comes with a handy tool to change a hot tip easily. IMPROVING Advantages of the Preheat Effect Allows you to use lead-free solder (which has a high melting point) at a temperature close to that of a Eutectic Sn-Pb tip. Minimal tip temperature reduction shortens soldering time significantly. Reduces splashing or component damage by heat shock. Advantages of Preheating with Nitrogen Reduces oxidation of the solder area and the tip. Improves solder wetting and fillet shape. Normal soldering iron A tip alone heats only the solder joint area, so the PCB drains the heat. Solder wetting may also be poor. Nitrogen soldering iron Nitrogen preheats the whole soldering area. This is particularly effective on a multi-layered PCB copper pattern. Better solder wetting. HEATED TOOLS INCLUDED Control Unit Iron Unit RX-80GASPH Soldering Iron Stand ST-22 HAND TOOLS Tip changing tool RX-80PHC Tip is not included Brass Wool & Sponges included 26

27 PRODUCT / FUNCTIONS Model RX-802ASPH Voltage 110 V, 120 V, 220 V, 230 V, 240 V AC 50/ 60 Hz Power Consumption 80 W Power Cord Length 1.2 m inlet type Temperature Setting Range C Ripple temperature ±5 C (unloaded) Insulation Resistance Over 100 MΩ (500 V DC) N2 Gas Adaptive Iron Unit RX-80GASPH (included) Applicable Iron Units *Non-N2, also supported. 80 W Standard Iron Unit *RX-80GAS (sold separately) Micro-Iron Unit *RX-81GAS (sold separately) Soldering Tweezers Unit *XST-80 (sold separately) Accessories Iron Unit (RX-80GASPH) Soldering Iron Stand (ST-22) For basic performance, please refer to RX-802AS, page 16. The Iron Unit RX-80GAS/ RX-81GAS/ XST-80G cannot be used as a N2 soldering iron. Control Unit Output Voltage 24 V AC Dimensions 115 (W) 98 (H) 146 (D) mm Weight 1.8 kg Iron Unit Model RX-80GASPH Iron Unit N2 Gas Adaptive Iron Unit Voltage/Consumption 24 V AC / 72 W Ground Resistance Less than 2 Ω Leak Voltage Less than 2 mv Nichrome heater Gas Supply Pressure 0.2M Pa (2 kgf/ cm 2 ) Cord Length 1.2 m Length 158 mm (with RX-80HRT-PHB) Weight 33 g (with RX-80HRT-PHB) Equivalent to IPC/EIA J-STD-001C *The length does not include the cord bushing. The weight does not include the cord. For replacement tips, refer to p. 28 For Soldering Tweezers XST-80G, refer to p. 69 REPLACEMENT PARTS / OPTIONS RX-802AS Iron Unit RX-802AS Iron Unit RX-812AS Iron Unit N2 O-ring Tip changing tool Soldering Iron Stand Sponge Soldering Iron Stand Cleaner RX-80PHP RX-80GAS RX-81GAS RX-80PHP RX-80PHC ST-53SP ST-40BW Tip is not included Tip is not included Non-N2, also supported Tip is not included Non-N2, also supported (2pcs./set) A compact N2 station combining N2 generator and controller. N2 STATION NC-100R Model Input pressure Input temperature Nitrogen generation density Recommended Nitrogen generation flow rate Flow meter Dimensions Weight Required Hose Dimension ANTI STATIC The special separation membrane separates the nitrogen from the compressed air produced by a compressor. Maintains a stable output pressure(0.2mpa). Two-tiered setting with RX-802ASPH achieves efficient work in smaller space. NC-100R MPa 5 50 C Maximum 99.5% (0.7 MPa, 0.5L / min) 1.0L / min L / min 118 (W) 112 (H) 185 (D) mm (not including protruding parts) 2kg Input: Outer diameter ø6 mm Output : Outer diameter ø4 mm NITROGEN GENERATION DENSITY (According to in-house measuring method) Nitrogen density [%] The relation between Nitrogen density, flow rate, and input air pressure [MPa] 0.5[MPa] 0.7[MPa] Flow rate [L / min] L/min MPa SET-UP EXAMPLE RX-802ASPH + NC-100R An example of measured values SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 27

28 NEW RX-81HRT Series / Applicable Iron Unit (Micro-Soldering Applicabe Iron Unit) Station RX-822AS RX-852AS RX-802AS RX-802ASPH RX-812AS Applicable Iron Unit (*Sold separately) RX-80GAS RX-85GAS *RX-81GAS RX-85GAS *RX-80GAS *RX-81GAS RX-80GAS *RX-81GAS *RX-80GAS *RX-81GAS RX-81GAS *RX-80GAS φ SURFACE MOUNT / SMT DES HEATED TOOLS φ4.7 RX-80HRT-B RX-80HRT-2B RX-80HRT-SB RX-80HRT-LB RX-80HRT-LBJ RX-80HRT-BM RX-80HRT-LB φ4.7 R φ4.7 R φ R RX-80HRT-1BC RX-80HRT-2.3BC RX-80HRT-3BC RX-80HRT-0.5C RX-80HRT-1C RX-80HRT-2C φ4.7 1 φ φ RX-80HRT-2CF RX-80HRT-2CD RX-80HRT-3C RX-80HRT-3CF RX-80HRT-3CD RX-80HRT-4C 1.2 φ φ4.7 φ RX-80HRT-4.7C RX-80HRT-0.8D RX-80HRT-1.2D RX-80HRT-1.6D RX-80HRT-2.4D RX-80HRT-3.2D φ4.7 φ0.8 φ4.7 φ1.2 RX-80HRT-5.4D RX-80HRT-3K RX-80HRT-4.5K RX-80HRT-4.5KH RX-80HRT-5.5K R 0.6 φ φ4.7 φ φ RX-85HRT-B RX-85HRT-2BC RX-85HRT-3BC RX-85HRT-5BC RX-85HRT-7BC RX-85HRT-3D RX-85HRT-5D RX-85HRT-7D RX-85HRT-6K RX-81HRT-B RX-81HRT-SB RX-81HRT-0.6C RX-81HRT-0.5D RX-81HRT-SBJ RX-81HRT-1.5K φ2.2 RX-80HRT Series / Applicable Iron Unit (80 W Standard Iron Unit) φ3 1.5 φ1 R0.25 φ φ φ1 R0.1 φ4.7 R RX-85HRT Series / Applicable Iron Unit (150 W High-heat-capacity Iron Unit) φ φ4.7 R HAND TOOLS φ1 0.6 Station RX-822AS RX-852AS RX-802AS RX-802ASPH RX-812AS Applicable Iron Unit (*Sold separately) RX-80GAS RX-85GAS *RX-81GAS RX-85GAS *RX-80GAS *RX-81GAS RX-80GAS *RX-81GAS *RX-80GAS *RX-81GAS φ2.2 RX-81GAS *RX-80GAS Station RX-822AS RX-852AS RX-802AS RX-802ASPH RX-812AS Applicable Iron RX-85GAS RX-85GAS Unit φ5.4 φ4.7 φ4.7 φ2 0.5 φ4.7 φ1.6 φ4.7 φ1 φ φ4.7 1 φ3 3 φ4.7 φ φ φ4.7 φ2 φ4.7 φ4 3 φ1.5 φ4.7 φ

29 RX-80HRT-PHB RX-80HRT-PH2B RX-80HRT-PHSB RX-80HRT-PHLB RX-80HRT-PHLBJ RX-80HRT-PHBM R 0.3 R0.6 R0.15 RX-80HRT-PH1BC RX-80HRT-PHB RX-80HRT-PH2.3BC RX-80HRT-PH3BC RX-80HRT-PH0.5C RX-80HRT-PH1C RX-80HRT-PH2C RX-85HSRT Series / Applicable Iron Unit (150 W High-heat-capacity Iron Unit) Station RX-822AS RX-852AS RX-802AS RX-802ASPH RX-812AS Applicable Iron Unit RX-85GAS RX-85GAS R RX-80HRT-PH2CD RX-80HRT-PH3C RX-80HRT-PH3CD RX-80HRT-PH4C RX-80HRT-PH4.7C RX-80HRT-PH0.8D φ2 2 φ3 2 φ3 3 RX-80HRT-PH1.2D RX-80HRT-PH1.6D RX-80HRT-PH2.4D RX-80HRT-PH3.2D RX-80HRT-PH5.4D RX-80HRT-PH3K φ1.2 RX-85HSRT-B RX-85HSRT-2BC RX-85HSRT-3BC RX-85HSRT-1.6D RX-85HSRT-2.4D RX-85HSRT-3.2D RX-80HRT-PH4.5K φ RX-85HSRT-4.5K φ RX-80HRT-PH4.5KH φ RX-80HRT-PH Series / Applicable Iron Unit (Micro-Soldering Applicabe Iron Unit) Station RX-822AS RX-852AS RX-802AS RX-802ASPH RX-812AS Applicable Iron Unit RX-80GASPH RX-89HRT Series / Applicable Iron Unit (500 W Super High-Power Iron Unit) Station RX-892AS Applicable Iron Unit RX-89GAS RX-89HRT-10D RX-89HRT-15D RX-89HRT-15A NEW φ R0.25 φ φ φ φ φ2 R φ0.8 φ SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 29

30 V-groove prevents solder splash. ANTI LEAD STATIC FREE v-groove AUTOMATIC SOLDER FEEDER FD-110 V-groove rollers are different according to solder diameter being used. Please let us know your solder diameter when purchasing FD-110.To replace or change v-groove rollers, please feel free to contact us. One-handed soldering work possible. ON/OFF switch is built into the Tube Assy FD-100TA (sold separately). ø mm lead-free solder applicable. Solder feed method for reducing solder clogs. The solder in this image is not included. *Please tell us your solder diameter when purchasing. (mm) SOLDER-SPLASH PREVENTION V-groove function MAX Ø1.6 SOLDER APPLICABLE* Wide tube INNOVATIVE DESIGN MEANS FEWER CLOGS Handpiece shaped for smooth solder flow COMPATIBLE WITH YOUR UNIT for goot RX series soldering stations V-groove function Grooved solder lets flux vapor be released. Reduces splash. Reduces defects. Solder splash Without V-groove, flux is scattered. Solder cross section V-groove Flux With V-groove, there is little scattering of flux. Flux Solder Flux Solder Without v-groove With v-groove SURFACE MOUNT / SMT DES Stable quality at less cost! Fixed Solder Feed ANTI LEAD STATIC FREE AUTOMATIC SOLDER FEEDER FD-100 The solder in this image is not included. MAX Ø1.6 SOLDER APPLICABLE Wide tube INNOVATIVE DESIGN MEANS FEWER CLOGS Handpiece shaped for smooth solder flow COMPATIBLE WITH YOUR UNIT for goot RX series soldering stations One-handed soldering work possible. ON/ OFF switch is built into the Tube Assy FD- 100TA (sold separately). ø mm lead-free solder applicable. Solder feed method for reducing solder clogs. The above photo is with optional parts. Solder, soldering unit, and other optional parts are not included with this FD-100. HAND TOOLS HEATED TOOLS 30

31 SAMPLE CONFIGURATION ➀ Temperature-Controlled Lead-Free Soldering Station FRONT PANEL (Common FD-100/110) ➊ Mode Changer ➋ Feed Time Adjuster ➌ Feed Speed Adjuster ➍ Main Power Switch ➎ Return Amount Adjuster ➏ Delay Time Adjuster ➂ Automatic Solder Feeder Unit FD-100 Constant feed volume. Stable quality at lower cost. This image is with optional parts. Solder, soldering unit, and other optional parts are not included with this FD-100. ➃ Tube Assy ➄ Guide Pipe ➁ Tip (RX-80HRT-B) ➅ Nozzle FD-100 Sample comfiguration ➀ Temperature-Controlled Lead-Free Soldering Station RX-802AS ➁ Tip RX-80HRT-B ➂ Automatic Solder Feeder Unit FD-100 ➃ Tube Assy (Solder Dia. ø ) FD-100TA-1.0 ➄ Guide Pipe (for RX-80GAS) FD-100P-80 ➅ Nozzle (Solder Dia. ø1.0) FD-100N-1.0 SURFACE MOUNT / SMT REPLACEMENT PARTS / OPTIONS TUBE ASSY Tube Assy (Solder Dia.ø ) FD-100TA-1.0 GUIDE PIPE Iron Unit RX-85GAS FD-100P-85 Iron Unit RX-80GAS FD-100P-80 Feeder Pen (Solder Dia.ø ) FD-100PN-1.0 Tube Assy (Solder Dia.ø ) FD-100TA-1.6 Iron Unit RX-72GAS FD-100P-72 NOZZLE Solder Dia. φ0.6/ 0.65 Solder Dia. φ0.8/ 1.0 FD-110N-0.6 FD-110N-1.0 Solder Dia. φ1.2/ 1.6 Foot Switch FD-110N-1.6 FD-100FS Feeder Pen (Solder Dia.ø ) FD-100PN-1.6 MODEL FD-100 FD-110 Voltage V AC 50/ 60 Hz Power Consumption 8 W Power Cord Length 1.5 m inlet type RX-802AS (with RX-80GAS) Applicable Soldering Irons RX-852AS (with RX-85GAS) RX-822AS (with RX-80/85GAS) RX-701/711AS (with RX-72GAS) Applicable Solder Diameter ø0.6 ø1.6 mm (LF solder applicable) ø0.6, ø0.8, ø1.0, ø1.2, ø1.6 mm (LF solder applicable) Solder Feed Speed 6 22 mm/ s (unloaded) Solder Feed Time 0 4 s Returned Solder Amount 0 5 mm (fixed speed) Solder Feed Delay Time 0 5 s Dimensions 82 (W) 140 (H) 210 (D) 82 (W) 149 (H) 210 (D) Weight 1.5 kg (w/o solder) 1.6 kg (w/o solder) *FD-110 configured for your desired solder diameter. To choose optional parts, please see p. 32 DES HEATED TOOLS HAND TOOLS 31

32 CHOOSING OPTIONAL PARTS 1. Choose the suitable guide pipe for your Iron Unit. For RX-80GAS Iron Unit For RX-85GAS Iron Unit For RX-72GAS Iron Unit Applicable Guide Pipe FD-100P-80 Tube Assy Applicable Guide Pipe FD-100P-85 Applicable Guide Pipe FD-100P-72 RX-80GAS RX-85GAS RX-72GAS The standard Iron Unit came with RX-802AS/822AS. The standard Iron Unit came with RX-852AS/822AS. 2. Choose the suitable nozzle and tube assy for your solder diameter. Solder Dia. 0.6 / 0.65 mm 0.8 mm 1.0 mm 1.2 mm 1.6 mm Tube Assy FD-100TA-1.0 The standard Iron Unit came with RX-701AS/711AS. Tube Assy FD-100TA-1.6 Nozzle Nozzle FD-110N-0.6 Nozzle FD-110N-1.0 Nozzle FD-110N-1.6 Feeder Pen Feeder Pen FD-100PN-1.0 Feeder Pen FD-100PN-1.6 SURFACE MOUNT / SMT DES ST-21, ST-22 soldering iron stand for RX-802AS/852AS/822AS If you don't have it, please purchase one. (The old ST-20 is not applicable) ST-21 ST-22 ST-27 soldering iron stand for RX-701AS/711AS If you don't have it, please purchase one. (The old ST-77 is not applicable) ST-27 Nozzle not included. Foot switch is required. Foot Switch FD-100FS ST-20 ST-77 HAND TOOLS HEATED TOOLS 32

33 MINI CONTROLLERS RX-701AS/711AS PX-501AS/501 PX-601AS/601 SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 33 33

34 Lightweight, slim handpiece with reduced heat-up! ANTI STATIC RX-701AS/RX-711AS HAND TOOLS SURFACE MOUNT / SMT DES New Soldering Iron Stand More stable, better operation Quick Heat Recovery New heater with internal sensor achieves 60 W. Easy to Use Allows two-tiered setting with another RX-701AS/711AS. High Insulation. Reliable 24 V Output. The heater is completely separated from the input power by the insulated transformer. And the 24 V heater is safe to use for sensitive components. Comfortable Handpiece We have made it slimmer while still achieving less heating of grip. Wide Variety of Tips A wide variety of replacement tips for all types of work. Refer to page p. 36 for further details. INCLUDED Control Unit Soldering Iron RX-72GAS Protective Cover (PAT.) Prevents tampering. HEATED TOOLS R Standard Tip PX-60RT-B 26 Soldering Iron Stand ST-27 φ6.5 Model RX-701AS RX-711AS Voltage 110 V, 120 V, 220 V, 230 V, 240 V AC 50/ 60 Hz Power Consumption 65 W Power Cord Length 1.2 m Temperature Setting Range C C Ripple temperature ±5 C (unloaded) Insulation Resistance Over 100 MΩ (500 V DC) Accessories Soldering Iron Stand (ST-27 ), Soldering Iron Tip (PX-60RT-B) Control Unit Output Voltage 24 V AC Dimensions 115 (W) 98 (H) 146 (D )mm Weight 1.5kg Soldering Iron Unit Voltage / Consumption Ground Resistance Leak Voltage Cord Length Length Weight RX-711AS RX-701AS 24 V AC / 60 W Less than 2 Ω Less than 2 mv Ceramic heater 1.2 m 197 mm (with PX-60RT-B) 44 g (with PX-60RT-B) Equivalent to IPC/EIA J-STD-001C *The length does not include the cord bushing. The weight does not include the cord. PX-60RT-B included Brass Wool & Sponges included TIP-TEMPERATURE RECOVERY FEATURES REPLACEMENT PARTS / OPTIONS RX-72H Barrel RX-72HP Collar TQ-77NUT Collar Barrel Spacer RX-72SS Iron Unit RX-72GAS Spacer Solder melted consecutively on 5 mm-dia land. Approx. 2 s / land. (with PX-60RT-B tip) ( ) Temp. Set at 450 C Set at 350 C (min.) Tip 34

35 High-performance soldering station. MINI PX-501AS/PX-501 Temperature adjustable C Collar Barrel Recommended ST-27 refer to page p. 88 ST-27 PX-501 Tip ANTI STATIC PX-501AS Quick Start (PAT.) Reaches set temperature fast with the Quick Start circuit. Temperature Calibration Accurate calibration. Leakage Current / Insulation-Resistance Measuring Terminal The PX-601 Series has a measurement terminal to easily assess leakage current and insulation resistance. Solder melted consecutively on 5 mm-dia land. Approx. 2 s / land. (with PX-60RT-B tip) REPLACEMENT PARTS / OPTIONS PX-60H PX-501/601 Iron Unit PX-60G Barrel PX-60HP ( ) Temp TIP-TEMPERATURE RECOVERY FEATURES Set at 450 C Set at 350 C (min.) PX-501AS/601AS Iron Unit PX-60GAS Collar TQ-77NUT Accurate temperature control, high-performance compact model. CONTROLLERS PX-601AS/PX-601 Comes with protective cover (PAT.) Soldering Iron Unit Wide Variety of Tips A wide variety of replacement tips for all types of work. Refer to page p. 36 for further details. R Standard Tip PX-60RT-B PX-601 ANTI STATIC PX-601AS Model PX-501 PX-501AS PX-601 PX-601AS Voltage 110 V, V AC 50/ 60 Hz Power Consumption 85 W Power Cord Length 1.5 m Temperature Setting Range C Ripple temperature ±5 C (unloaded) Insulation Resistance Over 100 MΩ (500 V DC) Accessories Soldering Iron Tip (PX-60RT-B) Control Unit Output Voltage 110 V, V AC Dimensions 100 (W) 57( H) 85 (D) mm 48 (W) 31 (H) 130 (D) mm Weight 266 g 75 g Voltage / Consumption Ground Resistance Leak Voltage Cord Length Length Weight 110 V, V AC /80 W Less than 2 Ω Less than 2mV Ceramic heater 1.2 m 195 mm (with PX-60RT-B) 41 g (with PX-60RT-B) *The length does not include the cord bushing. The weight does not include the cord. Anti-Static Model PX-501AS/PX-601AS PX-501AS PX-601AS 26 φ6.5 SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 35

36 SURFACE MOUNT / SMT 0.7 PX-60RT Series / Applicable Model 1 φ5 φ5 R0.5 φ φ5 φ5 PX-60RT-B PX-60RT-SB PX-60RT-LB PX-60RT-1C PX-60RT-1.5C 6 17 φ5 R φ5 R0.2 6 PX-60RT-2C PX-60RT-3C PX-60RT-4C PX-60RT-0.5CR PX-60RT-0.8CR φ5 φ φ5 φ PX-60RT-1CR PX-60RT-2CR PX-60RT-3CR PX-60RT-4CR PX-60RT-0.8D 5 15 φ5 φ φ5 φ PX-60RT-1.2D PX-60RT-1.2LD PX-60RT-1.6D PX-60RT-2.4D PX-60RT-3.2D φ1.2 φ3 2 φ φ1.2 φ φ5 φ1.6 6 PX-60RT-3K PX-60RT-5K PX-60RT-1.8H PX-60RT-H PX-60RT-R φ5 2 φ φ5 φ4 φ5 φ2.4 φ PX-60RT-RT PX-60RT-S4 735 ( 税別 PX-60RT-S4 700)/*PX-61RT-S4 641 ( 税別 610) PX-60RT-SB2 PX-60RT-SI 2 2 φ φ5 R RX-701AS, RX-711AS, PX-501, PX-501AS, PX-601,PX-601AS, CXR-31,CXR φ R φ R HAND TOOLS HEATED TOOLS DES φ φ5 φ0.8 φ5 φ3.2 φ5 φ

37 HIGH HEAT VOLUME TEMP-CONTROLLED IRON IRON PX-401 PX-201 FIXED-TEMPERATURE PCB HOLDER PX-335/338/342 ST-200 SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 37 37

38 Large tip for high thermal-storage effect. HIGH HEAT VOLUME TEMP-CONTROLLED IRON PX-401 Wide-range iron with temperature adjuster. IRON PX-201 Temperature Setting Screw PX-401 TEMPERATURE ADJUSTABLE C ERGONOMIC GRIP Prevents fatigue Power Lamp ACCURATE TEMPERATURE CONTROL Ceramic heater with internal sensor HIGH THERMAL-STORAGE EFFECT Easy soldering of large parts Heat Insulation Cap for Quick Storage Included. TEMPERATURE ADJUSTABLE C ERGONOMIC GRIP Prevents fatigue Power Lamp Temperature Setting Screw ACCURATE TEMPERATURE CONTROL Ceramic heater with internal sensor HEAT-RESISTANT CAP For quick storage after use SURFACE MOUNT / SMT DES HEATED TOOLS Model PX-401 Voltage V, V AC 50/ 60 Hz Power Consumption 70 W Temperature Setting Range C Ripple temperature ±5 C (unloaded) Insulation Resistance Over 100 MΩ (500 V DC) Ceramic Power Cord Length 1.5 m Length 215 mm Weight 92 g Accessories Soldering Iron Tip (PX-40RT-5C) *The length does not include the cord bushing. The weight does not include the cord. REPLACEMENT TIPS PX-40RT-B PX-40RT-2C PX-40RT-3C R φ10 2 Overall View REPLACEMENT PARTS / OPTIONS Collar PX-20H CXR-80NUT Washer Recommended Stand CXR-80 WS ST φ10 3 PX-40RT-4C PX-40RT-5C PX-40RT-8C 20 φ φ10 PX-40RT-3D PX-40RT-5D PX-40RT-5CJ 20 φ10 φ3 φ φ10 Model PX-201 Voltage V, V AC 50/ 60 Hz Power Consumption 70 W Temperature Setting Range C Ripple temperature ±5 C (unloaded) Insulation Resistance Over 100 MΩ (500 V DC) Ceramic Power Cord Length 1.5 m Length 210 mm Weight 90 g Accessories Soldering Iron Tip (PX-2RT-SB) *The length does not include the cord bushing. The weight does not include the cord. Replacement tips are interchange able with PX-3 series. Refer to next page. REPLACEMENT PARTS / OPTIONS Barrel PX-20H TQ-77HP (S) Spacer Collar TQ-77SS TQ-77NUT CAP Recommended Stand TQ-CAP ST-27 HAND TOOLS φ φ10 φ10 NEW φ10 Collar Washer Tip Collar Barrel Tip Spacer 38

39 The heater is automatically controlled. FIXED-TEMPERATURE PX-335/PX-338/PX-342 Power Lamp POWER LAMP Easy heater-on check AUTOMATIC HEAT CONTROL According to the heating load of the tip COOLER GRIP Thermal insulation & rubber grip REPLACEMENT PARTS / OPTIONS PX-20H Barrel PX-3HP Recommended Stand ST-27 PX-338 APPLICABLE High-power ceramic heater COMFORTABLE Improved grip design Model PX-335 PX-338 PX-342 Voltage V, V AC 50/ 60 Hz V model W Power Consumption V W W model Temperature Setting Range 350 C 380 C 420 C Ripple temperature ±5 C (unloaded) Insulation Resistance Over 100 MΩ (500 V DC) Ceramic Power Cord Length 1.5 m Length 220 mm Weight 70 g Accessories Soldering Iron Tip (PX-2RT-B) *The length does not include the cord bushing. The weight does not include the cord. Spacer TQ-77SS Collar PX-3NUT 0.5 φ6 φ5.5 φ PX-2RT-SB PX-2RT-B PX-2RT-BC φ2.5 R0.3 Collar Barrel φ5.5 R0.5 Round solder-plated tip PX-2RT-2CR Tip Spacer φ5.5 1 PX-2RT-2BC PX-2RT-3BC PX-2RT-2C φ3 φ6 3.2 φ5.5 φ2.1 PX-2RT-3C PX-2RT-4C PX-2RT-5C φ5.5 φ4 φ5 PX-2RT-1.6D PX-2RT-2.4D PX-2RT-3.2D φ5.5 φ8 φ1.6 φ5.5 φ2.4 PX-2RT-4D PX-2RT-5D PX-2RT-5K φ5.5 φ PX-2RT-8S Standard type Round solder-plated type REPLACEMENT TIPS 1 φ5.5 φ5 φ5 φ PX-2RT-6E 16 4 φ2.1 φ PX-2RT-4CR φ φ5 φ5 φ5.5 φ3.2 Overall View PX-2RT-3CR φ5.5 φ3 PX-2RT-5CR φ5 37 PX-2RT-B 16 7 φ7 SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 39

40 PCB HOLDER Holds large PCBs firmly PCB Holder (PCB Assembly Jig) ST-200 ANTI STATIC SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS Holds large PCBs firmly Useful for mounting of components, cutting lead wire, soldering, etc. Takes large PCBs Accommodates PCBs up to 500 x 210 mm when central rail is removed. Easy to mount/unmount PCBs Springs in guide rails enable you to mount/unmount PCBs without re-adjustments. Anti-static foam for supporting components Anti-static foam supports components so they don t move around or fall. Adjust PCB angle Adjusts allow PCB to be set at various angles. Model Width Depth Hight Weight REPLACEMENT PARTS / OPTIONS ST-200 Sponge ST-200SP ST mm 360 mm 335 mm (at vertical position) 5.4kg Example of use 40

41 HIGH-EFFICIENCY QUICK-HEAT PRECISION PCB PRECISION-COMPONENT MOUNTING-BOARD HIGH-POWER STAINED-GLASS IRON STAINED-GLASS TQ-77/95 CS-21/31 CXR-31/41 CXR-60/80/100 HRC-401 HRC-80/100 SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 41 41

42 HIGH-EFFICIENCY Two-stage high-power heater. QUICK-HEAT TQ-77/95 POWER LAMP (TQ-77 ONLY) Easy heater-on check TWO-STAGE HEAT-SWITCH 10 times higher power than normal COMFORTABLE High-power ceramic heater ERGONOMIC GRIP Prevents fatigue Power monitor lamp SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS Best for precision soldering. PRECISION PCB CS-21/31 CS-31 TQ-95 QUICK-HEAT BUTTON Controles power Specially processed long-life tip Heat-resistant cap for quick storage after use. Model TQ-77 TQ-95 Voltage V, V AC 50/ 60 Hz Power Consumption High 150 W / Low 15 W ( V model) High 200 W / Low 20 W ( V model) Insulation Resistance Over 100 MΩ (500 V DC) Ceramic Power Cord Length 1.5 m Length 167 mm 210 mm Weight 90 g 65 g Accessories Soldering Iron Tip (TQ-77RT-B) Soldering Iron Tip (TQ-77RT-B) Cap for TQ-95 (TQ-CAP) *The length does not include the cord bushing. The weight does not include the cord. NOTE: High power runs while trigger/quick button is pressed. REPLACEMENT PARTS / OPTIONS TQ-95 TQ-77 TQ-95H TQ-77H TQ-77/95 Barrel TQ-77/95 Collar TQ-77HP(L) V TQ-77NUT TQ-77HP(S) V REPLACEMENT PARTS / OPTIONS CS-21 CS-21H CS-31 CS-31H CERAMIC-PIPE HEATER Lower priced tips PERFECT FOR PRECISION Slim and sharp tips SLIM GRIP Easy to hold Recommended Stand ST-27 TQ-77/95 Spacer TQ-77SS φ5.5 φ4 φ5.5 trigger TQ-77 REPLACEMENT TIPS TQ-77RT-SB TQ-77RT-B TQ-77RT-BC R φ5.5 R0.5 TQ-77RT-2C TQ-77RT-3C φ5.5 φ2.1 φ3 R φ3 1 φ3 φ Overall View 38 (48) 25.5 CS-20/30RT-2C CS-20/30RT-3C φ2 φ3 φ φ5.5 φ7.3 ( ) Size for V AC model TQ-95 Heat-Resistant Cap Recommended Stand TQ-CAP ST-27 Model CS-21 CS-31 Voltage 110 V, 220 V, 240 V AC 50/ 60 Hz 110 V, 120, 220 V, 240 V AC 50/ 60 Hz Power Consumption 20 W 25 W Insulation Resistance Over 100 MΩ (500 V DC) Ceramic Power Cord Length 1.5 m Length 188 mm Weight 43 g Accessories Soldering Iron Tip (CS-20/30RT-SB) *The length does not include the cord bushing. The weight does not include the cord. REPLACEMENT TIPS CS-20/30RT-SB CS-20/30RT-SBC φ3 42

43 Best for SMD soldering. PRECISION-COMPONENT MOUNTING-BOARD CXR-31/41 COMPACT AND LIGHT Easy use THICK-PLATED LONG-LIFE TIP Hard chrome coated EASY HEATER REPLACEMENT Connector-type heater CXR-31/41 Heat-resistant cap for quick strage after use. (Sold sepalately) Model CXR-31 CXR-41 CXR-60 CXR-80 CXR-100 Voltage 110 V, 120 V V AC 110 V,120 V V,240 V V, V AC 50/ 60 Hz Power Consumption 22 W 30 W 28 W 32 W 38 W Insulation Resistance Over 100 MΩ (500 V DC) Ceramic Power Cord Length 1.5 m Length 205 mm 268 mm Weight 60 g 80 g 88 g Accessories Soldering Iron Tip PX-60RT-SB CXR-80RT-5C CXR-100RT-7C *The length does not include the cord bushing. The weight does not include the cord. REPLACEMENT PARTS / OPTIONS CXR-31 CXR-31H CXR-31/41 Spacer CXR-31SS CXR-31/41 Collar TQ-77NUT CXR-60 CXR-60H CXR-100 CXR-100H CXR-100 Collar CXR-100NUT CXR-100 Washer CXR-100 WS CXR-31/41 CXR-60/80/100 Collar Barrel Collar Washer Tip Spacer Tip CXR-31 CXR-41 CXR-41H CXR-31/41 Barrel PX-60HP Heat-Resistant Cap TQ-CAP CXR-80 CXR-80H CXR-60/80 Collar CXR-80NUT CXR-60/80 Washer CXR-80 WS Recommended Stand ST-27 High-powered quick thermal recovery. HIGH-POWER CXR-60/80/100 HIGH THERMAL-STORAGE EFFECT Good for terminals, connectors THICK-PLATED LONG-LIFE TIP Hard chrome coated EASY HEATER REPLACEMENT Connector-type heater For CXR-31/41 Series A wide variety of replacement tips for all types of work. Refer to p. 36 for further details. For CXR-60/80 Series 1 R φ5 Heat-resistant cap (TQ-CAP)is not available for the CXR-60/80/100. R0.2 CXR-100 CXR-60/80 CXR Standard Tip PX-60RT-SB CXR-80RT-B CXR-80RT-2C CXR-80RT-3C φ For CXR-100 Series CXR-100RT-B CXR-100RT-2C CXR-100RT-3C 1.5 φ10 CXR-80RT-4C CXR-80RT-5C CXR-80RT-3D 20 φ10 CXR-80RT-5D 20 R φ7 φ10 φ11 φ φ10 CXR-80RT-5CJ φ10 φ11 CXR-100RT-5C CXR-100RT-7C CXR-100RT-5D 20 φ11 CXR-100RT-7D 20 φ11 REPLACEMENT TIPS 7 φ7 20 φ11 CXR-100RT-7CJ 25 φ φ3 3 φ φ10 φ10 φ11 φ11 φ6.5 SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 43

44 HIGH-EFFICIENCY Best temperature adjustment. STAINED-GLASS IRON HRC-401 lspecial soldering iron for stained-glass work. ladjustable to optimum temperature for copper tape, lead came or pearl frame. l70 W high-power. Power Lamp SURFACE MOUNT / SMT DES Slim grip for easy handling. STAINED-GLASS HRC-80/HRC-100 lspecial soldering iron for stained-glass work. lgood for Tiffany-style to lead-came style. lequipped with slim grip for easy handling with small hands. HRC-80 HRC-100 Model HRC-401 HRC-80 HRC-100 Voltage V, V AC 50/ 60 Hz Power Consumption 70 W 32 W 38 W Temperature Setting Range C - - Insulation Resistance Over 100 MΩ (500 V DC) Ceramic Power Cord Length 1.5 m Length 215 mm 273 mm 273 mm Weight 83 g 80 g 88 g Accessories Soldering Iron Tip PX-40RT-5CJ CXR-80RT-5CJ CXR-100RT-7CJ *The length does not include the cord bushing. The weight does not include the cord. HRC-401 HRC-80 HRC-100 HRC-401 HRC-80 HRC-100 PX-40RT-5CJ CXR-80RT-5CJ CXR-100RT-7CJ 25 φ10 REPLACEMENT TIPS 25 φ10 25 φ11 HEATED TOOLS HAND TOOLS φ5 REPLACEMENT PARTS / OPTIONS HRC-401 PX-20H HRC-100 CXR-100H HRC-100 Collar CXR-100NUT HRC-100 Washer CXR-100 WS φ5 φ7 HRC-80 CXR-80H HRC-401/80 Collar CXR-80NUT HRC-401/80 Washer CXR-80 WS Recommended Stand ST-27 44

45 NICHROME HEATER / GAS-POWERED GENERAL ELECTRONICS SHEET-METAL DUAL-POWER PORTABLE IRON WITH CAP LOW-VOLTAGE STARTER KIT (ELECTRONICS/CRAFT & HOBBY) GAS-POWERED RED / BLACK TIPS COPPER TIPS KS/KX series HP series KYP-60/70 CA-30R/40R MI-6 series SG series GP series R/RD/RB series T series SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 45 45

46 14φ4 9φ4 12φ6 SURFACE MOUNT / SMT DES HEATED TOOLS NICHROME HEATER /GAS-POWERED Our best-selling soldering iron. GENERAL ELECTRONICS KS Series RED TIP Long-life tips LIGHT GRIP Easy to use New ergonomic design. GENERAL ELECTRONICS KX Series RED TIP Long-life tips ERGONOMIC HANDLE Reduces fatigue KS-30R KX-30R Model / Application KS-20R / KX-20R KS-30R / KX-30R KS-40R / KX-40R KS-60R / KX-60R KS-80R / KX-80R KS-100R / KX-100R KS series KS-20R/KX-20R KS-20H KS-40R/KX-40R KS-40H KS-80R/KX-80R KS-80H Recommended Stand ST-75 IC REPLACEMENT PARTS / OPTIONS R0.3 P.C. Board Transistors Condensers Resistors Swiches Terminals Connectors Lead wires Coaxial Cables KS-30R/KX-30R KS-30H KS-60R/KX-60R KS-60H KS-100R/KX-100R KS-100H Recommended Stand ST-11 REPLACEMENT TIPS R-48SB R-48B R-6B 75 R R Metal Cases Model KS-20R KS-30R KS-40R Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz 20 W equiv. 30 W equiv. 40 W equiv. Power Consumption Power consumption may vary according to location and item specs. Please see Products power consumption and safety standard p.6 Nichrome Length 205 mm Weight 45 g Accessories Soldering Iron Tip R-48SB R-48B R-48B Model KS-60R KS-80R KS-100R Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz 60 W equiv. 80 W equiv. 100 W equiv. Power Consumption Power consumption may vary according to location and item specs. Please see Products power consumption and safety standard p.6 Nichrome Length 230 mm 235 mm 240 mm Weight 65 g 70 g 75 g Accessories Soldering Iron Tip R-6B RD-67BC RD-68BC *The length does not include the cord bushing. The weight does not include the cord. KX series Model KX-20R KX-30R KX-40R Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz 20 W equiv. 30 W equiv. 40 W equiv. Power Consumption Power consumption may vary according to location and item specs. Please see Products power consumption and safety standard p.6 Nichrome Length 208 mm Weight 50 g Accessories Soldering Iron Tip R-48SB R-48B R-48B Model KX-60R KX-80R KX-100R Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz 60 W equiv. 80 W equiv. 100 W equiv. Power Consumption Power consumption may vary according to location and item specs. Please see Products power consumption and safety standard p.6 Nichrome Length 233 mm 238 mm 243 mm Weight 70 g 75 g 80 g Accessories Soldering Iron Tip R-6B RD-67BC RD-68BC *The length does not include the cord bushing. The weight does not include the cord. HAND TOOLS 1.5 RD-67BC 83 φ7 15φ6 1.5 RD-68BC 88 φ8 17φ6 46

47 High power. Suitable for sheet-metal work. SHEET-METAL HP-150/200/300 WOODEN HANDLE Has good insulation LARGE COPPER TIP Can be shaped to suit your work purpose Model HP-150 HP-200 HP-300 Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz 150 W equiv. 200 W equiv. 300 W equiv. Power Consumption Power consumption may vary according to location and item specs. Please see Products power consumption and safety standard p.6 Nichrome Length 360 mm 370 mm 390 mm Weight 450 g 610 g 710 g Accessories Soldering Iron Tip T-13A T-16A T-19A *The length does not include the cord bushing. The weight does not include the cord. SURFACE MOUNT / SMT DES REPLACEMENT TIPS HP-150 HP-200 HP-300 T-13A T-16A T-19A φ13 φ16 φ19 REPLACEMENT PARTS / OPTIONS HP-150 HP-150H HP-300 HP-300H HP-200 HP-200H Recommended Stand ST-70 HEATED TOOLS HAND TOOLS 47

48 9φ4 9φ4 NICHROME HEATER /GAS-POWERED For hobby use with dual switch. Length only 150 mm! Weight only 9 g! DUAL-POWER LOW-VOLTAGE KYP-60/70 MI-6-6 V/MI-6-12 V High 60 W power when trigger is pulled. RB-475B R REPLACEMENT PARTS / OPTIONS KYP-70H Recommended Stand ST-11 KYP-70 comes with heat resistant cap for quick storage. For other replacement tips, refer to next page. Model KYP-60 KYP-70 Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz Trigger ON 60 W equiv./trigger OFF 30 W equiv. Power Consumption Power consumption may vary according to location and item specs. Please see Products power consumption and safety standard p.6 Nichrome 3 Length 175 mm Weight 160 g Accessories TQ-CAP (KYP-70), Soldering Iron Tip : RB-475B *The length does not include the cord bushing. The weight does not include the cord. Store quickly after soldering. PORTABLE IRON WITH CAP CA-30R/40R Heat Resistant Cap for KYP-70 TQ-CAP φ2.4 MI-6T-SC Standard φ4 R0.25 REPLACEMENT PARTS / OPTIONS MI-6-6 V MI-6H-6 V Recommended Stand ST-30 MI-6T-SB φ4 MI-6-12 V MI-6H-12 V The tip and heater barrel connect to the minus pole (-) of the power supply. When using power from a car cigarette-lighter socket, never let the iron come into contact with the plus pole (+) of the car's electrical circuitry, or it may short-circuit or cause serious damage. Model MI-6-6 V MI-6-12 V Voltage 5 6 V AC / DC V AC / DC Power Consumption 6 W Nichrome Length 150 mm Weight 9 g Accessories Soldering Iron Tip : MI-6T-SC *The length does not include the cord bushing. The weight does not include the cord. Value Package STARTER KIT (ELECTRONICS/CRAFT & HOBBY) SG series Recommended for Beginners NEW SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS CA-30R Model CA-30R CA-40R Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz 30 W equiv. 40 W equiv. Power Consumption Power consumption may vary according to location and item specs. Please see Products power consumption and safety standard p.6 Nichrome Length 185 mm Weight 60 g Accessories Soldering Iron Tip : R-48B *The length does not include the cord bushing. The weight does not include the cord. R-48B R For other replacement tips, refer to next page. REPLACEMENT PARTS / OPTIONS CA-30R KS-30H Heat Resistant Cap TQ-CAP Gun mode Pen mode CA-40R KS-40H Recommended Stand ST-11 SG-1 SG-2 Model SG-1 SG-2 CLASSIFICATION Electronics Kit Craft & Hobby Kit INCLUDED ITEMS Solder for Electronics Desoldering Wick CP-2015 Tapered Reamer Tip Cleaner ST-30 Heat Clip H-1S p.80 p.86 p.88 p.87 Solder for Craft & Hobby Square Scraper/ Knife Tip Cleaner ST-30 Heat Clip H-1S Soldering Paste BS-10 p.86 p.88 p.87 p.92 48

49 10 to 20 times longer life than normal copper tips. RED TIPS / BLACK TIPS R/RD/RB series Tip Size Table TYPE R-48 R-6 RD-67 RD-68 b a B Ra c b c b a BC b c c b a C b c c a c a D b b c b a SB Ra b c 2 3 b a 2 3 SC φa b c a φa φc c The goot Red Tips are genuine, long-life replacement tips. Made of iron-plated copper, coated with aluminum. 10 to 20 times longer life than normal copper tips. Hi-precision processed tips achieve extremely accurate soldering work. The goot Black tips are made of copper, iron plated, and covered with heat resistant coating. Copper Pre-solder Tip Applicable Model List SPEC MODEL TYPE DIA. LENGTH APPLICABLE MODEL Black Tip RB-475B B φ4 mm 75 mm KYP-60, KYP-70 RB-680B B φ6 mm 80 mm KX-60R, KS-60R R-48B B R-48BC BC CA-30/40R R-48C C KS-20R/30R/40R φ4 mm 75 mm R-48D D KYP-60, KYP-70 R-48SB SB KX-20R, KX-30R, KX-40R R-48SC SC R-6B B R-6BC BC R-6C C KS-60R φ6 mm 80 mm R-6D D KX-60R Red Tip R-6SB SB R-6SC SC RD-67B B RD-67BC BC KS-80R φ6-7 mm 83 mm RD-67C C KX-80R RD-67D D RD-68B B RD-68BC BC KS-100R φ6-8 mm 88 mm RD-68C C KX-100R RD-68D D File reshaping available. COPPER TIPS T series Tip Applicable Model List SPEC MODEL TYPE DIA. LENGTH APPLICABLE MODEL T-13A A φ13 mm 115 mm HP-150 Copper Tip T-16A A φ16 mm 120 mm HP-200 T-19A A φ19 mm 135 mm HP-300 Iron TIP SHAPES A TYPE B TYPE BC TYPE C TYPE D TYPE SB TYPE SC TYPE Aluminum Tip Size Table TYPE T-13 T-16 T-19 a b φc A b c a During soldering, the flux may cause deformation or holes to appear in the copper tip. Please use a file to reshape the tip. SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 49

50 NICHROME HEATER /GAS-POWERED High thermal-efficiency brass tip. GAS-POWERED IRON GP-101S Take high power outdoors. GAS-POWERED IRON GP-501 PORTASOL SUPER PRO lcompact gas soldering iron. Heats quickly. Takes only 30 seconds from ignition until soldering. lcontrols equivalent power of W with the temperature adjuster (at max temperature 480 C). NOTE: Fill with gas before use. Model GP-101S Ignition System Flint-type ignition system Combustion System Gas Heating System Gas Type Butane lighter gas Max. Temp. Output Soldering Iron: 480 C Refill Time 3 s Operation Time Per Refill Approx. 45 mins. ( with temp.set at max.) Length 157 mm Weight 43 g lheats quickly. Takes only 30 seconds from ignition until soldering. Controls equivalent power of W with the temperature adjuster. lcan be used as a blow torch by removing the tip. With optional tips, do soldering work for large metal or precision PCBs, or use as a hot knife or a hot air tool. loperates approx. 45 minutes between refills (when used at max. temperature as a soldering iron). lone-handed, one-touch ignition switch. REPLACEMENT TIPS GP-101T-1C GP-101T-2.4C GP-101T-3.2C NOTE: Fill with gas before use. SURFACE MOUNT / SMT DES 1.0 φ Standard GP-101T-4.8C GP-101CU φ7 Model Ignition System Combustion System Gas Type Max. Temp. Output Refill Time Operation Time Per Refill Length Weight GP-501 Piezo electricity ignition system Gas Heating System Butane lighter gas 580 C (Soldering Iron) 1300 C (Blow Torch) 625 C (Hot Air) 20 s Approx. 45 mins. (for soldering) 223 mm 147 g REPLACEMENT TIPS 1.0 GP-501RT-1C GP-501RT-2.4C GP-501RT-3.2C HEATED TOOLS 4.8 φ3.2 Standard GP-501RT-4.8C GP-501RT-1D GP-501RT-2.4D φ1.0 GP-501RT-3.2D GP-501RT-4.8D GP-501CU GP-501HT 26 φ4.8 φ Hot Knife HAND TOOLS Hot Air φ5.5 Long-life iron-plated tips. 50

51 lheats quickly. Takes only 30 seconds from ignition until soldering. Controls equivalent power of W with the temperature adjuster. loptional tip converts it to a hot knife or other hot air tools. loperates approx. 45 minutes between refills (when used φ3.2 Piezo ignition, compact type. GAS-POWERED IRON GP-510 PORTASOL PRO PIEZO NOTE: Fill with gas before use. Model Ignition System Combustion System Gas Type Max. Temp. Output Refill Time Operation Time Per Refill Length Weight Long-life iron-plated tips. at max. temperature as a soldering iron). lone-handed, one-touch ignition switch. GP-510RT-1C GP-510RT-2.4C GP-510RT-3.2C Standard GP-510RT-4.8C GP-510RT-1D GP-510RT-2.4D φ1.0 GP-510RT-3.2D GP-510RT-4.8D GP-510CU φ6.0 Hot Air GP-510HT 22 REPLACEMENT TIPS φ GP-510 Piezo electricity ignition system Gas Heating System Butane lighter gas 580 C (Soldering Iron) 625 C (Hot Air) 20 s Approx. 45 mins. (for soldering) 175 mm 65 g φ GP-510ST Hot Knife Must be used with the GP-510HT. A set of soldering iron, 3 tips, cleaner, stand, and case. GAS-POWERED IRON SET GP-510SET PORTASOL PRO PIEZO SET lcontrols equivalent power of W with the temperature adjuster. lreplacement tip converts it to a hot air tool. NOTE: Fill with gas before use. Hot air By connecting the enclosed shrink tip, shrink tube processing is easy. IRON Max tip temperature 580 C HOT AIR TOOL Max temperature 625 C Model Ignition System Combustion System Gas Type Max. Temp. Output Refill Time Operation Time Per Refill Length Weight Soldering 2.4 mm Long-life iron-plated tips. Soldering 1.0 mm INCLUDED ITEMS Soldering iron, 2 Soldering tips (2.4 mm, 1 mm), Hot air tip, Tip cleaner, Iron stand, and Case 2 soldering tips: 1 mm and 2.4 mm. Ideal for repair of PCBs, communication cables, stained glass, models, vehicles, ships, and antennas. Ideal for wiring heat-shrink-tube, vinyl-chloride welding, and applying cream solder. GP-510RT-1C GP-510RT-2.4C GP-510HT TIPS INCLUDED IN SET Replacement tips are interchangeable with GP GP-510ST Must be used with the GP-510HT. GP-510SET Piezo electricity ignition system Gas Heating System Butane lighter gas 580 C (Soldering Iron) 625 C (Hot Air) 20 s Approx. 45 mins. (for soldering) 175 mm 65 g φ6.0 SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 51

52 YOUR BEST TIP Custom tips are available. For industrial robots, improved productivity, cost cutting, please contact a goot distributor. Tip shape is crucial to soldering quality and efficiency. Here are our main tip shapes, and applicable works. Please refer to this table for your tip selection. Spec LEAD COMPONENTS SMD OTHERS Condenser, Resistor, Small components DIP, SIP, ICs Lead wire Connector, Switch Flat IC Condenser, Resistor, Small components Large terminal Small components, Fine lead wire Narrow area Small part Best Good OK NO Large part NOTE SURFACE MOUNT / SMT DES HEATED TOOLS B Type (Conic) C Type (with Slant column-cut) D Type Flathead(-) K Type (Knife) B General purpose LB longer slim BC with cut face SB fine tip 1C face approx. 1 mm 2C face approx. 2 mm 3C face approx. 3 mm 4C face approx. 4 mm 5C face approx. 5 mm 0.8D tip line width approx. 0.8 mm 1.6D tip line width approx. 1.6 mm 2D tip line width approx. 2 mm 2.4D tip line width approx. 2.4 mm 3.2D tip line width approx. 3.2 mm 5K width 5 mm General purpose, small area Small heat load General purpose, moderately large area General purpose, small heat load Moderately large area or harness Large area or harness Large area or large heat load Large area or large heat load Small area or small heat load Small area or small heat load Small area or lead wire Small area or lead wire Small area or large heat load For bridges HAND TOOLS 52

53 Sensor Unit TM-200 TM-100 TM-100SU SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 53

54 / Quick testing. Shorten your routine. TM-200 LONG-LIFE TEMPERATURE SENSOR (PAT.P.) Good for over 200 uses SENSOR-LIFE COUNTER ALARM (PAT.P.) to Estimate Operating-life ONE Multi-Tester measures tip temperature, leak voltage, and tip-to-ground resistance of soldering irons. PEAK-HOLD FUNCTION Retains display of the temperature change DES HAND TOOLS HEATED TOOLS SURFACE MOUNT / SMT COMPARATOR FUNCTION Warning lamp & buzzer tell pass-fail result of the set upper-lower limit. INDICATED VALUE HOLD FUNCTION (Peak-Hold Function) With one push, keeps the indicated value displayed. AUTO ZERO FUNCTION Automatically corrects the zero error when measuring Leak Voltage & Earth Resistance. SENSOR-LIFE COUNTER ALARM Estimates operating-life of the sensor. 54

55 Key Pad ➃ ➀ ➄ ➅ ➉ ➇ ➈ ➂ ➁ ➆ Unit Key Pad Terminal Plate Aluminum Mat Sensor Connecting Pin Red Silicon Washer Sensor Attaching/Detaching Knob Inlet Socket Outlet Power Switch Ground Terminal ➀ MODE Changer (Setting key in setting mode) ➁ AUTO ZERO Button (Down key in setting mode) ➂ PEAK HOLD Button (Up key in setting mode) ➃ MODE Lamp ➄ COMPARATOR Lamp (Lights up) ➅ COMPARATOR Result Indicator ➆ SENSOR ALARM Lamp (Flashes) ➇ Decimal Point ➈ Hold Lamp (Lights up) ➉ Display Universal Tester! V available without transformer. Can be used all over the world. Corresponding to wide temperature range *0-700 C (1292 F), as is needed for soldering work. The tolerance stays in the range of ±0.5% of the full scale (excluding sensor error). The sensor's structure makes for easy tip placing. It achieves stable & accurate measuring within seconds, regardless of shape, or angle of tip. Easily replaceable sensor. *0-700 C is the range with (optional) sensor probe TM-100SP. With the standard sensor TM-100S, measurable C (932 F). REPLACEMENT PARTS / OPTIONS Sensor (3pcs.) TM-100S Sensor Unit TM-100SU TM-100SU Sensor Unit TP-100SU. Refer to next page. Sensor Probe (1pc.) TM-100SP Terminal Plate TM-200P TM-100S TM-100SP Model TM-200 Voltage V AC 50/ 60 Hz Input Current 7A Dimensions 185 (W) 58 (H) 160 (D) mm (w/o cord) Weight Approx. 1 kg (w/o cord) Resolution 1 C Temperature Measuring Range Sensor TM-100S: C( F) Probe TM-100SP: C( F) Accuracy C : ± C : ± 4 C Resolution mv: 0.1 mv mv: 1 mv (auto range) Voltage Measuring Range mv Accuracy ±(5% of reading value + 1dgt) Resolution Ω : 0.1 Ω Ω : 1 Ω (auto range) Resistance Measuring Range Ω Accuracy ± (5% of reading value + 1dgt) Operating Environment 0-40 C, 20-85%RH (no condensation) Accessories Sensor 3 pcs, Earth connecting lead, Fuse, Power Cord, Plug Adapter SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 55

56 / Quick measuring. Shorten your routine. TM-100 Power Switch Battery Alarm Sensor Reset Peak Hold/Mode Set Sensor Alarm Hold ON/OFF SURFACE MOUNT / SMT DES Wide temperature range *0-700 C (1292 F), as is necessary for soldering work. The tolerance stays in the range of ±0.5% of the full scale (excluding sensor error). The sensor's structure makes for easy tip placing. It achieves stable & accurate measuring within seconds, regardless of shape, or angle of tip. Easily replaceable sensor. *0-700 C is the range with (optional) sensor probe TM-100SP. With the standard sensor TM-100S, measurable C (932 F). Model TM-100 Voltage AA battery LR6 x 4 pcs : 6 V Dimensions 83 (W) 140 (H) 38 (D) mm Weight 150 g (w/o battery) Resolution 1 C Temperature Measuring Range Sensor TM-100S: C ( F) Probe TM-100SP: C (32-1,292 F) Accuracy C : ±3 C C : ± 4 C Operating Environment 0-40 C, 20-85%RH (no condensation) Accessories Sensor 3 pcs AA battery LR6 x 4pcs REPLACEMENT PARTS / OPTIONS Sensor (3pcs.) TM-100S LONG-LIFE TEMPERATURE SENSOR (PAT.P.) Good for over 200 uses PEAK-HOLD FUNCTION Retains display of the temperature change SENSOR-LIFE COUNTER ALARM(PAT.P.) to Estimate Operating-life AUTO-POWER OFF Automatically powers off at pre-set period TM-100S Sensor Probe (1pc.) TM-100SP TM-100SP HEATED TOOLS HAND TOOLS Compact sensor for hard-to-reach places. SENSOR UNIT TM-100SU Model Dimensions Weight Cord Length Compatible Models TM-100SU 64 (W) x 28 (H) x 100 (D) (w/o cord) 210 g ø4 1.5 m TM-100, TM-200 TM-100 or TM-200 is required for TM-100SU to measure tip temperatures. TM-100SU cannot be used alone. TM-100S sensors sold separately. 56

57 PCB DIPPING HOLDER POT series PCB-1 SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 57 57

58 Takes medium PCBs. SOLDER POT [cast-iron bath] POT-400C LEAD FREE HAND TOOLS HEATED TOOLS SURFACE MOUNT / SMT DES LARGE BATH For medium-sized PCBs CAST-IRON BATH Lead-free solder applicable ACCURATE TEMPERATURE CONTROL With PID control DUAL DIGITAL DISPLAY Shows set-temperature & measured-temperature REPLACEMENT PARTS / OPTIONS (for Bottom) POT-400CHAH Bath POT-400CP Firmly holds the PCB. PCB DIPPING HOLDER PCB-1 (for side) POT-400CHBH Model POT-400C Voltage V AC 50/ 60 Hz Power Consumption 4 kw Max. Temp. 400 C Set Accuracy ±{(1.25% of display temperature)+1 C} Sheath Control System PID Control Power Cord Length 3 m (3 core cord w/o plug) Solder Bath Material Cast Iron Max. Solder Volume 50 kg Bath Unit 602 (W) 165(H) 427 (D) mm Dimensions Control Unit 175 (W) 122(H) 260 (D) mm Solder Bath 400 (W) 60(H) 300 (D) mm Weight 43 kg NOTE: The weight does not include the cord. l Holds the PCB firmly for dipping into the solder pot. Model PCB-1 Material SUS Applicable PCB size Up to 250 mm Length 260 mm Holder width 55 mm 58

59 Accurate temperature control with PID control. SOLDER POT [Stainless bath] POT-100C Accurate temperature control with PID control. SOLDER POT [Stainless bath] POT-200C ACCURATE TEMPERATURE CONTROL With PID control EASY HEATER REPLACEMENT Separated structure of heater and bath DUAL DIGITAL DISPLAY Shows set-temperature & measured-temperature ACCURATE TEMPERATURE CONTROL With PID control EASY HEATER REPLACEMENT Separated structure of heater and bath DUAL DIGITAL DISPLAY Shows set-temperature & measured-temperature Economical and erosionresistant cast-iron bath. SOLDER POT [cast-iron bath] POT-103C LEAD FREE Economical and erosionresistant cast-iron bath. LEAD FREE SOLDER POT [cast-iron bath] POT-203C ACCURATE TEMPERATURE CONTROL With PID control CAST-IRON BATH Lead-free solder applicable DUAL DIGITAL DISPLAY Shows set-temperature & measured-temperature EASY HEATER REPLACEMENT Separated structure of heater and bath ACCURATE TEMPERATURE CONTROL With PID control CAST-IRON BATH Lead-free solder applicable DUAL DIGITAL DISPLAY Shows set-temperature & measured-temperature EASY HEATER REPLACEMENT Separated structure of heater and bath SURFACE MOUNT / SMT Model POT-100C POT-103C POT-200C POT-203C Voltage 110 V,120 V, 220 V,240 V AC 50/ 60 Hz V, V AC 50/ V, V AC 50/ V,120 V,220 V,240 V AC 50/ 60 Hz Hz Hz Power Consumption 440 W 900 W 650 W 1400 W Max. Temp. 350 C 450 C 400 C 450 C Set Accuracy ±{(1.25% of display temperature)+1 C} Nichrome Sheath Nichrome Sheath Control System PID Control Power Cord Length 1.3 m 1.5 m (3 core cord w/o plug) 1.3 m 1.5 m (3 core cord w/o plug) Solder Bath Material SUS316 Cast Iron SUS316 Cast Iron Max. Solder Volume Approx. 5.5 kg Approx. 3.5 kg Approx. 9.5 kg Approx. 7 kg Dimensions 360 (W) 124 (H) 220 (D) mm 450 (W) 124 (H) 220 (D) mm Solder Bath Dimensions 91(W) 60(H) 135(D) mm 82 (W) 53 (H) 110 (D) mm 180 (W) 60 (H) 130 (D) mm 173 (W) 53 (H) 108 (D) mm Weight 5kg 8kg 7kg 11 kg NOTE: The weight does not include the cord. REPLACEMENT PARTS / OPTIONS POT-100C POT-200C POT-100C Bath (Stainless) POT-200C Bath (Stainless) POT-100CH POT-200CH-S POT-100CP POT-200CP POT-103C POT-203C POT-103C Bath (Cast Iron) POT-203C Bath (Cast Iron) POT-103CHA POT-203CHA POT-103CP POT-203CP POT-103CHB POT-203CHB DES HEATED TOOLS HAND TOOLS 59

60 Economical and erosionresistant cast-iron bath. SOLDER POT [cast-iron bath] POT-50C ACCURATE TEMPERATURE CONTROL With PID control CAST IRON BATH Lead-free solder applicable REPLACEMENT PARTS / OPTIONS POT-50CH Temperature control knob for optimal dipping. DUAL DIGITAL DISPLAY Shows set-temperature & measured-temperature Bath POT-50CP LEAD FREE LEAD FREE llead-free applicable bath. Perfect for pre-tinning of transformer leads or small PCBs. laccurate PID temperature control. (sensor feedback ON/OFF control available) ltemperature adjustable up to 500 C. lassured temperature control with the digital key-lock function. lsafety housing design. Model POT-50C Voltage 110 V-130 VAC 50/ 60 Hz 220 V-240 VAC 50/ 60 Hz Power Consumption W W Max. Temp. 500 C Ceramic Control System PID Control Power Cord Length 1.5 m Inlet type Solder Bath Material Cast Iron Max Solder Volume Approx. 850 g Unit Dimensions Solder Bath Dimensions Weight NOTE: The weight does not include the cord. SOLDER POT POT-21C/23C/28C LEAD FREE 174 (W) 142 (H) 28 5(D) mm 50 (W) 50 (H) 50 (D) mm 3kg SURFACE MOUNT / SMT POT-21C POT-23C POT-28C DES Spatula included. Spatula included. Spatula included. HEATED TOOLS HAND TOOLS lzero-cross control drastically reduces output noise (Timeproportioning system). lled pilot lamp lights when heater is ON. NOTE: No sensor feedback system, so temperature may fluctuate +/- approx.10%. POT-21C POT-23C POT-28C Suitable for pre-tinning of large terminals, urethane wires, connectors, and large lead wires. REPLACEMENT PARTS / OPTIONS POT-21C/23C/28C POT-21CH POT-23C Bath POT-23CP Lead-free applicable. No erosion with a ceramic bath. Suitable for pre-tinning of relatively large parts. POT-21C Bath POT-21CP POT-28C Bath POT-28CP Lead-free applicable. Longer life with a cast-iron bath. Suitable for pre-tinning of relatively large parts. Model POT-21C POT-23C POT-28C Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz Power Consumption 130 W Bath Temperature C Melting Time (at max. setting) Approx. 10 mins. Nichrome Control System Time Proportioning Control Power Cord 1.3m Solder Bath Material Stainless Steel Ceramic Cast Iron Solder Capacity Approx. 300 g Dimensions 90(W) 87(H) 150(D)mm 90(W) 91(H) 150(D)mm 90(W) 89(H) 150(D)mm Internal Pot Dimensions ø36 36 (D) mm ø31 39 (D) mm ø34 32 (D) mm Weight 720 g 800 g NOTE: The weight does not include the cord. 60

61 SURFACE-MOUNT/ SMT HOT-AIR REWORK STATIONS HANDPIECE HOLDERS BOARD HOLDERS PREHEATERS SMT REWORK REPAIR HOT-AIR PENCIL TWEEZERS TWEEZERS UNIT REBALL KIT XFC series XK series XU series XPR series GSR series XHP-110 XST-80 XST-80G XRB series SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 61 61

62 SURFACE-MOUNT / SMT Equipped with Auto Profile Mode. Handles BGAs, CSPs and all SMDs using the preheater. HOT-AIR REWORK STATIONS XFC-300/301 ANTI LEAD STATIC FREE leither Auto profile or Repeat Profile function (PAT.). l5 zone profiles available:preheat 1, PREHEAT 2, PREHEAT 3, REFLOW, and COOL. lup to 19 profiles* can be saved for each of the 5 zones. lone profile can be registered for HAND Mode. laccurate PID temperature control. l and Vacuum switches located on the handpiece for easy control. lon/off interface with Preheater (connection cable optional). lkeypad Lock and Offset functions. linstant cool down on all zones by pressing the COOL key. *separate profiles with specific temperature and time settings can be pre-programmed for each of the 5 Zones Auto-Lift Function AUTO PROFILE Can be set to the desired profile without a test ACCURATE TEMPERATURE CONTROL With PID control HAND OPERATION and vacuum switches on the handpiece VARIOUS PROFILES AVAILABLE Up to 19 profiles, each with 5 zones ON/OFF INTERFACE Controls external preheater FORCED COOL-DOWN On all zones with cool key Nozzles sold separately. An economic solution with maximum heat capacity. Handles BGAs, CSPs and all SMDs. HOT-AIR REWORK STATION XFC-210 XFC-301 ANTI LEAD STATIC FREE Nozzles sold separately. Auto Cool-Down function to protect the heater. Handles QFPs, PLCCs, SOLs. HOT-AIR REWORK STATION XFC-110 ANTI LEAD STATIC FREE XFC-300 DES SURFACE MOUNT / SMT HEATED TOOLS HAND TOOLS Nozzles sold separately. ACCURATE TEMPERATURE CONTROL With P temperature control HAND OPERATION and vacuum switches on the handpiece VARIOUS PROFILES AVAILABLE Up to 19 profiles, each with 5 zones ON/OFF INTERFACE Controls external preheater FORCED COOL-DOWN On all zones with cool key l5 zone profiles available: PREHEAT 1, PREHEAT 2, PREHEAT 3, REFLOW, and COOL. lup to 19 profiles* can be saved for each of the 5 zones. One profile can be registered for HAND Mode. laccurate P temperature control. l and Vacuum switches located on the handpiece for easy control. lon/off interface with Preheater (connection cable optional). lkeypad Lock and Offset functions. linstant cool down on all zones by pressing the COOL key. *individual profiles with specific temperature and time settings can be preprogrammed for each of the 5 Zones Nozzles sold separately. TEMPERATURE CONTROL With ON/OFF control VACUUM PICK-UP Highly accurate AUTO COOL-DOWN Protects the heater DIGITAL DISPLAY Easy temperature control FLOW METER Easy air-flow control ltemperature management using ON-OFF control. ldigital temperature display for easy temperature management. lvacuum pickup function, Flow meter for easy airflow management. lauto Cool Down function to protect heater. 62

63 XFC series FEATURES TABLE FUNCTION XFC-301 XFC-300 XFC-210 XFC-110 Auto-lift* 5-zone Profiles Auto Profile Mode Normal Profile Mode Hand Mode Saving of Profile Mode and Hand Mode PID Control P control ON/OFF and Vacuum Control on Handpiece Interface to Control Preheater Keypad Lock, Offset Forced Cool-down Vacuum Pick-up Digital Display Flow Meter Auto Cool-down Ergonomic Handpiece *Handpiece with removed SMD can be lifted automatically after the reflow process is finished. Control Unit Model XFC-301 XFC-300 XFC-210 XFC-110 Output Voltage V AC 220 V, 230 V, 240 V AC Air-flow Meter Equipped Air-flow Volume 5 25L /min 5 23L /min 5 25L /min Auto-lift Function Included - Modes 3 (Profile-Normal, Profile-Auto, Hand) 3 (Profile-Flat, Profile-Slope, Hand) 1 (Hand) Temperature Profiles 5 Zones (Temperature and Time) Profile Memory ( Auto, Normal ) 19, HAND 1 ( Flat,Slope) 19, HAND 1 Dimensions 200 (W) 230 (H) 265 (D) mm 182 (W) 179 (H) 263 (D) mm Weight 7.6 kg ( w/o cord ) 8.4 kg ( w/o cord ) 7.8 kg ( w/o cord ) Accessory Connection Cable with Preheater, Handpiece Holder, XVCW-SET Handpiece Holder, XVCW-SET Handpiece Unit Model XFC-301 XFC-300 XFC-210 XFC-110 Voltage V AC 220 V, 230 V, 240 V AC Power Consumption W 400 W Nichrome Hose Length between Handpiece and Control 1 m Unit Vacuum Pickup Integrated into Handpiece Length 220 mm (w/o cord) Weight 180 g (w/o nozzle, cord) MODES NORMAL AUTO HAND Create your own profiles for the 5 zones. Can be set to the desired profile without a test. (PAT.) XFC-301/300 only Configure temperature settings for manual rework. [TEMP] REFLOW PREHEAT COOL Model XFC-301 XFC-300 XFC-210 XFC-110 Voltage V AC 50/ 60 Hz 220 V, 230 V, 240 V AC 50/ 60 Hz Power Consumption W 470 W Power Cord Length 1.5 m (3 core cord) Inlet type Temperature Setting Range C C Insulation Resistance Over 10 MΩ (500 V DC) XFC-301/300 AUTO PROFILE EXAMPLE PREHEAT1 PREHEAT2 PREHEAT3 REFLOW COOL [ TIME ] REPLACEMENT PARTS / OPTIONS Vacuum Cup ø6 mm XFC-100H XVCW-6 XFC Pipe XFC-100HP Vacuum Cup Set XVCW-SET Vacuum Cup φ10 φ8 φ6 (mm) Vacuum Cup ø8 mm XVCW-8 Vacuum Cup ø10 mm XVCW-10 SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 63

64 SURFACE MOUNT / SMT SURFACE-MOUNT / SMT XFC Series Optional Nozzles (PAT.) XNSG series (for SO, SOL) A D P / N inch mm inch mm XNSG SO16 XNSG SSOP8T XNSG SOL20/26, TSOP20/24 XNSG TSOP24 XNSG SOL20, TSOP28 XNSG TSOP32 XNSG TSOP28/32 XNSG TSOP40/48 XNSG PSOP44 XNSG SO8 XNSG series (for SOJ) XNPG series (for PLCC) Applicable Package A D P / N inch mm inch mm XNSG SOJ20 Applicable Package P / N A B C D inch mm inch mm inch mm inch mm XNPG PLCC 7.3 X 12.5 XNPG PLCC 28 XNPG PLCC 11.5 X 14 XNPG PLCC 44 XNPG PLCC 52 XNPG PLCC 68 XNPG PLCC 84 SO, SOL D A B A A Applicable Package Custom nozzles are available. Please contact a goot distributor. XNSG series Vacuum pick-up cup for XFC-301/300/210/110 XNSG series XNPG series SOJ PLCC D D C XNQG series XNBG series XNQG series (for QFP, BQFP) P / N A B C D inch mm inch mm inch mm inch mm XNQG QFP64,QFP48,QFP80,BQFP28 XNQG SQFP100, TQF100 XNQG SQFP12, QFP80, QFP100 XNQG BQFP100T25, QFPT63 XNQG BQFP84 XNQG BQFP132, FQFP176 XNQG QFP128, SQFP208 XNQG BFP184T, FQFP408 XNQG BQFP196 XNQG BQFP244 XNBG series (for BGA) P / N inch A mm Applicable Package Applicable Package XNBG BGA16, BGA25 XNBG BGA49, BGA64 XNBG BGA49, BGA64 XNBG BGA81, BGA100 XNBG BGA121 XNBG BGA144, BGA121 XNBG BGA169 XNBG BGA324, BGA225, BGA289 XNBG BGA529, BGA484 XNBG BGA576, BGA625 XNBG BGA625, BGA676 QFP / BQFP D C B A BGA A For Discrete Components ID: 2.0 ID: 3.0 XNDG-1 XNDG-2 XNDG-3 62 ID: 5.5 XNDG-4 62 ID: 7.0 XNDG ID: 3.0 DES Fixes the XFC series handpiece securely. HANDPIECE HOLDER XK-1 Example of Setting Secure fixing and micro-adjustment of the XFC series handpiece. HANDPIECE HOLDER XK-2 HEATED TOOLS HAND TOOLS l Holder for XFC handpiece to attach to XPR-600/1000 preheater. MODEL Dimensions Weight XK-1 Holder : 330(L) x 110(W) x 160(H)mm Column : ø28 x 390 mm Holder :1.5 kg / Column:480 g l Allows micro-adjustment of the XFC series handpiece while holding an SMD. Makes mounting work easy. MODEL X direction adjustable range Y direction adjustable range Control knob pitch Dimensions Weight XK-2 20 mm 20 mm 0.8 mm per one complete turn Holder : 330 (L) x 110 (W) x 196 (H) mm Column : ø28 x 390 mm Holder : 1.8 kg / Column : 480 g 64

65 Smooth motion. Easy mounting and removing. BOARD HOLDERS XU-1/XU-1S MODEL XU-1 XU-1S Max. PCB size 305 mm x open side Dimensions 265 (W) 36 (H) 265 (D) mm Extended 400 (W) 36 (H) 265(D) mm Weight 840 g 900 g Heating up by the large air-output prevents damage to PCBs. Handles medium PCBs. PREHEATER XPR-600 lcool PCBs with fan mode, reducing process time. l Instant upgrade when combined with XFC series rework station. lsensor feedback temperature control. ldigital display shows setting temperature. lxu series (sold separately) can be fixed. High-powered heater. Best for preheating multi-layered PCBs. Handles small multi-layered PCBs. PREHEATER XPR-610 lsmall preheater with a high-powered heater. lheating area can be changed to fit the PCB size. lcomes with simple board holder. laccurate temperature control with PID control. ldigital temperature display. Large-capacity IR heater prevents damage to PCBs. Handles large multi-layered PCBs. PREHEATER XPR-1000 ANTI STATIC ANTI STATIC ANTI STATIC llarge heating area quickly provides uniform heat on large multi-layered PCBs. lpid control achieves precise temperature control for lead-free solder. lcomes with anti-warping tool. linstant upgrade when combined with XFC series rework station. XU-1S handles irregularly-shaped PCBs. XPR-600 XPR-610 XPR-1000 PCB mounting example. MODEL XPR-600 XPR-610 XPR-1000 Voltage V, V AC 50/ 60 Hz 220 V, 240 V AC 50/ 60 Hz Power Consumption W, W 2,100 W Power Cord Length 1.5 m (3 core cord) Inlet type 3 m (3 core cord) w/o plug Nichrome IR Temperature Control System ON-0FF Control PID Control Temperature Setting Range C Room temperature 300 C Heating Area 58 x 58 mm Min. 10 x 10 mm /Max. 58 x 58 mm 270 x 270 mm Air Flow (Fan Performance) 0.23 m 3 /min 0.23 m 3 /min - Recommended Holder XU-1/XU-1S Mini PCB Holder Assy (included) Board Holder (included) Max. PCB size 305 mm x open side 150 mm x open side 424 x 460 mm (Max.) Dimensions 266 (W) x 90 (H) x 413 (D) mm 180 (W) x 90 (H) x 256 (D) mm 508 (W) x 145 (H) x 610 (D) mm Weight 5.1 kg 2.8 kg 16.6 kg XU-1 XU-1S Hot Air Vent Adjusters SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 65

66 SURFACE-MOUNT / SMT For large packages, large boards, and multi-layered PCBs. Handles BGAs, CSPs, QFPs, and all SMDs. SMT REWORK REPAIR GSR-302 Handles BGAs, CSPs, QFPs, and all SMDs. SMT REWORK REPAIR GSR-301/300 CONFIGURATION Nozzles sold separately. ITEM GSR-302 Preheater XPR-1000 Hot-Air Rework Station XFC-301 Handpiece Holder XK-2 Board Holder Included with XPR-1000 For large packages, large boards, and multi-layered PCBs. Handles BGAs, CSPs, QFPs, and all SMDs. SMT REWORK REPAIR GSR-212 CONFIGURATION Nozzles sold separately. ITEM GSR-301 GSR-300 Preheater XPR-600 XPR-600 Hot-Air Rework Station XFC-301 XFC-300 Handpiece Holder XK-2 XK-2 Board Holder XU-1 XU-1 Handles BGAs, CSPs, QFPs, and all SMDs. SMT REWORK REPAIR GSR-210 SURFACE MOUNT / SMT DES CONFIGURATION Nozzles sold separately. ITEM Preheater Hot-Air Rework Station Handpiece Holder Board Holder Handles QFPs, SOLs, and discrete components. SMT REWORK REPAIR GSR-110 GSR-212 XPR-1000 XFC-210 XK-2 Included with XPR-1000 HEATED TOOLS HAND TOOLS CONFIGURATION Nozzles sold separately. ITEM GSR-210 Preheater XPR-600 Hot-Air Rework Station XFC-210 Handpiece Holder XK-2 Board Holder XU-1 CONFIGURATION Nozzles sold separately. ITEM GSR-110 Preheater XPR-600 Hot-Air Rework Station XFC-110 Handpiece Holder XK-1 Board Holder XU-1 66

67 HOT-AIR REWORK STATIONS XFC-301 p.62 XFC-300 PREHEATERS XPR-610 p.65 XPR-600 XFC-210 HANDPIECE HOLDERS p.64 XFC-110 BOARD HOLDERS p.65 XPR-1000 XU-1S XK-1 XK-2 XU-1 SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 67

68 SURFACE-MOUNT / SMT Speedy and accurate reworking of chip parts. TWEEZERS XST-80 ANTI LEAD STATIC FREE TIp (Tip cartridge) not included MULTIFUNCTION TWEEZERS UNIT Calibration, Sleep, Keylock, etc.. TIP REPLACEMENT WITHOUT TOOLS Easy to replace a hot tip without any other tools. GRIP WITH INTEGRATED TIP Allows less deviation of both tips. ERGONOMIC GRIP DESIGN Prevents fatigue SURFACE MOUNT / SMT DES * The station unit for the XST-80 is our Lead- Free Soldering Station RX-802AS Model XST-80 (Control Unit,Tweezers Unit Grip) Voltage 110 V, 120 V, 220 V, 230 V, 240 V AC 50/ 60 Hz Power Consumption 80 W Power Cord Length 1.2 m Temperature Setting Range C Ripple temperature ±5 C (unloaded) Insulation Resistance Over 100 MΩ (500 V DC) Accessories Soldering iron stand ST-28 Control Unit Output Voltage 24 V AC Dimensions 115 (W) x 98 (H) x 146 (D) mm Weight 1.8 kg (w/o cord ) Grip Unit Voltage/Consumption Ground Resistance Leak Voltage Cord Length Length Weight 24 V AC / 72 W Nichrome heater Less than 2 Ω Less than 2mV 1.2 m 120 mm ( w/o cord bushing, with tip cartridge) 48 g ( w/o cord, with tip cartridge) Equivalent to IPC/EIA J-STD-001C CALIBRATION SERVICES We provide calibration and/or certification for a fee. Multifunction tweezers unit Equipped with intelligent function [Calibration (PAT.), Sleep function (PAT.), Keylock function (PAT.)]. RX-822AS can use both soldering unit and tweezers simultaneously. Ergonomic grip design Stroke adjustment for handling various sizes of parts. (PAT.P) Grip with integrated tip High-accuracy design with minimum tip deviation. Easy replacement of hot tips without any other tools. Soldering Tweezers Unit XST-80G Soldering-Tweezers Stand ST-28 Tip cartridge (This is not included.) ø HEATED TOOLS HAND TOOLS REPLACEMENT PARTS / OPTIONS Soldering Unit XST-80G Soldering Iron Stand Sponge ST-53SP Soldering Iron Stand Cleaner ST-40BW For replacement tips, refer to next page. 68

69 Speedy and accurate reworking of chip parts TWEEZERS UNIT (Tweezers unit grip only) XST-80G Tip (Tip cartridge) not included ANTI LEAD STATIC FREE For use with RX-822AS/852AS/802AS/812AS. Calibration (PAT.), Sleep function (PAT.), Keylock function (PAT.) are available. RX-822AS can use both soldering unit and tweezers simultaneously. 2 soldering irons can be used., DUAL-PORT STATION RX-822AS p.20 Soldering Tweezers Unit only. (Tip cartridge not included in XST-80G.) APPLICABLE MODELS - SAMPLE CONFIGURATION STATION RX-852AS p.22 MULTIFUNCTION TWEEZERS UNIT Calibration, Sleep, Keylock, etc.. TIP REPLACEMENT WITHOUT TOOLS Easy to replace a hot tip without any other tools. GRIP WITH INTEGRATED TIP Allows less deviation of both tips. ERGONOMIC GRIP DESIGN Prevents fatigue High-accuracy design with minimum tip deviation for variety of chip parts. p.24 p.18 STATION RX-802AS/RX-812AS SURFACE MOUNT / SMT When you use the soldering iron stand ST-21 or ST-27 with XST-80G, the front opening ST-28MS for the Soldering Tweezers is required (sold separately). Model Voltage/Consumption Cord Length Length Weight REPLACEMENT PARTS / OPTIONS XST-80G (Tweezers Unit Grip) 24 V AC / 72 W Nichrome heater 1.2 m 120 mm ( w/o cord bushing, with tip cartridge) 48 g ( w/o cord, with tip cartridge) XST-80HRT-0.5 XST-80HRT-0.5NW XST-80HRT-2 XST-80HRT-1 XST-80HRT-1C 12 REPLACEMENT PARTS / OPTIONS Tips/heaters not sold apart from cartridges. 12 Not solder-plated Soldering Iron Stand ST-28 Soldering Iron Stand Sponge ST-53SP Soldering Iron Stand Cleaner ST-40BW Front Opening of the Tip Cartridge ST-28MS ST-28 When you use the soldering iron stand ST-21 or ST-27 with XST-80G, please remove its front opening, and replace with the front opening ST-28MS for the tip cartridge (sold separately). DES HEATED TOOLS HAND TOOLS 69

70 SURFACE-MOUNT / SMT Reball Kit allows replacement of solder balls on a BGA. REBALL KIT XRB series ➀ ➁ ➂ ➃ ➄ ➅ 1. Remove the existing solder balls on the BGA chip with a soldering iron and a desoldering wick. 2. Set the Guide Plate on the base, and hold the BGA with the vacuum source. SURFACE MOUNT / SMT Also required to reball components: Hot-air rework station (X FC-110/210/300/301), soldering iron, desoldering wick, cream solder, and solder balls. (Sold separately.) After reballing ➆ ➀ Metal Mask (Mask Plate included) ➁ Ball Guide (Mask Plate included) ➂ Guide Plate ➃ Base ➄ Tamper ➅ Spatula ➆ Hose (to connect the Base with the vacuum source) XRB Reball Kits are customized for specific BGAs. Please send us the technical drawings of your BGA. 3. Set the Metal Mask. Use the spatula to apply the cream solder to all the holes. 5. Press the solder balls into the cream solder with the tamper. 4. Mount the Ball Guide. Pour the solder balls into the holes. 6. Take out the BGA from the base, and apply heat. HAND TOOLS HEATED TOOLS DES 70

71 DE SERVICE STATIONS AUTOMATIC DE STATIONS PORTABLE DE GUNS DE WICKS DE SUCKERS SVS-800AS/580AS/500AS TP-280AS /200AS TP-100AS/100 CP/CPN series GS series SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 71 71

72 DE SERVICE STATIONS Omnifunctional machine for soldering, desoldering and reworking. SERVICE STATION SVS-800AS ANTI LEAD STATIC FREE INDEPENDENT PUMPS Desoldering and reworking operate simultaneously 400% MORE SUCTION CAPACITY With open-valve mechanism CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs (soldering & desoldering) SUPERIOR TEMPERATURE-CONTROL CIRCUIT To keep the temperature constant during desoldering ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy SURFACE MOUNT / SMT DES REWORK UNIT The temperature can be set to max 550 C. UNIT Good for a wide range of soldering work with 70 W heater. DE UNIT Instant desoldering with open-valve mechanism. (Please refer to the next page.) INDIVIDUAL POWER SWITCHES Along with the main power switch, there are switches for soldering, desoldering, and reworking. Nozzles sold separately. HEATED TOOLS HAND TOOLS ST-76 soldering iron stand (included) 72

73 PRODUCT / FUNCTIONS OPEN-VALVE MECHANISM Two-stage trigger switch (PAT.P) Step 1 Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber. Step 2 Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber. Solder Soldering Unit ( )500 Tip temp DE UNIT UNIT REWORK UNIT Pull trigger fully 1 Work (Set at 400 C) The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450 mmhg) in only 0.1second. (about 4 times faster than our SVS- 500AS). 2 3 Open-valve mechanism 4 5 (min.) (mmhg) Vacuum chamber Desoldering Unit ( ) 500 Nozzle temp Trigger First stage switch Negative pressure Work (Set at 450 C) (min.) Vaccum Degree Chart SVS-580AS SVS-800AS SVS-500AS Pump TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES Solder melted consecutively on 5 mm-dia land. Approx. 2 s / land. (with PX-2RT-B tip, TP-100N-10 nozzle) Vacuum pressure compared with other goot models (sec.) SUCTION CAPACITY COMPARISON The arrow indicates solder residue. SVS-500AS MODEL SVS-800AS Voltage V AC 50/ 60 Hz Power Consumption W Power Cord Length 1.5 m Inlet type Temp. Desoldering Unit C Setting Soldering Unit C Range Rework Insulation Resistance Over 10 MΩ (500 V DC) Vacuum Pump System Diaphragm system Vacuum MPa (-600 mmhg) Air Flow 5-25L /min Accessories Cleaning pin TP-100CP-13 / Soldering iron stand ST-76 Total Weight 9.3 kg CONTROL BOX Output Voltage V AC Dimensions 405 (W) 240 (H) 235 (D) mm Weight 8.4 kg (w/o cord, hose ) DE UNIT Input Voltage/Power Consumption V AC / 85 W Ceramaic Cord Length 1.2 m Dimensions 220 x 155 mm Weight 250 g (w/o cord, hose ) Standard Nozzle TP-100N-S5 UNIT Input Voltage/Power Consumption V AC / 70 W Ground Resistance Less than 2 Ω Leak Voltage Under 2 mv Ceramic heater Cord Length 1.2 m Length 190 mm (with PX-2RT-B w/o cord bushing) Weight 70 g (with PX-2RT-B w/o cord ) Standard Tip PX-2RT-B REWORK UNIT SVS-800AS Input Voltage/Power Consumption V AC / W Nichrome Hose length between Handpiece and Control Unit 1 m Length 220 mm (w/o cord) Weight 180 g (w/o nozzle, cord) This machine does not have vacuum pickup function. For replacement tips, nozzles, and optional parts, refer to p.64 & p. 79 SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 73

74 DE SERVICE STATIONS Desoldering in an instant, with reduced solder residue! Combines desoldering gun and temperature-controlled soldering iron in one unit. SERVICE STATION SVS-580AS ANTI LEAD STATIC FREE 400% MORE SUCTION CAPACITY With open-valve mechanism CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs SUPERIOR TEMPERATURE-CONTROL CIRCUIT To keep the temperature constant during desoldering ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy SUCTION CAPACITY COMPARISON The arrow indicates solder residue. SVS-500AS SVS-580AS SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS OPEN-VALVE MECHANISM Two-stage trigger switch (PAT.P) Step 1 Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber. Step 2 Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber. Solder Pull trigger fully Soldering Unit ( )500 Tip temp. 1 Work (Set at 400 C) 2 3 Open-valve mechanism 4 5 (min.) (mmhg) Negative pressure Vacuum chamber Trigger First stage switch Desoldering Unit ( ) 500 Nozzle temp. Pump TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES Work (Set at 450 C) (min.) Vaccum Degree Chart Solder melted consecutively on 5 mm-dia land. Approx. 2 s / land. (with PX-2RT-B tip, TP-100N-10 nozzle) The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450 mmhg) in only 0.1second. (about 4 times faster than our SVS- 500AS). Vacuum pressure compared with other goot models SVS-580AS SVS-500AS (sec.) CONTROL BOX Output Voltage 110 V,120 V, V AC Dimensions 205 (W) x 170 (H) x 160 (D) mm Weight 3.6 kg (w/o cord, hose ) DE UNIT Input Voltage/Power Consumption 110 V,120 V, V AC 85 W Ceramaic Cord Length 1.2 m Dimensions 220 x 155 mm Weight 250 g (w/o cord, hose ) Standard Nozzle TP-100N-S5 UNIT SVS-580AS MODEL Voltage 110 V,120 V, V AC 50/ 60 Hz Power Consumption 200 W (110 V,120 V) W ( V) Power Cord Length 1.5 m Temperature Desoldering Unit C Setting Range Soldering Unit C Insulation Resistance Over 100 MΩ (500 V DC) Vacuum Pump System Diaphragm system Vacuum MPa (-600 mm Hg) Accessories Cleaning pin TP-100CP-13 Soldering iron stand ST-76 Total Weight 4.0 kg (w/o cord ) Input Voltage/Power Consumption 110 V,120 V, V AC 70 W Ground Resistance Less than 2 Ω Leak Voltage Under 2mV Ceramic heater Cord Length 1.2 m Length 190 mm (with PX-2RT-B w/o cord bushing ) Weight 70 g (with PX-2RT-B w/o cord ) Standard Tip PX-2RT-B For replacement tips, nozzles, and optional parts, refer to p. 79 ST-76 soldering iron stand (included) 74

75 Combines desoldering gun and temperature-controlled soldering iron in one unit. SERVICE STATION SVS-500AS ANTI STATIC POWERFUL VACUUM Everything from through-hole to multi-layered PCB CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy UNIT lstable temperature with excellent heat speed & heat recovery. lgood for a wide range of soldering work, for terminals, connectors, and flat ICs. DE UNIT lbuilt-in powerful and compact twin pump. lwhen trigger is pulled, the heater heats up forcibly, reducing temperature decrease. lafter trigger release, the pump operates for approx. 0.5 seconds more, reducing solder clogs. TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES Soldering Unit ( )500 Tip temp Work (Set at 400 C) (min.) Solder melted consecutively on 5 mm-dia land. Approx. 2 s / land. (with PX-2RT-B tip, TP-100N-10 nozzle) Desoldering Unit ( ) 500 Nozzle temp. (mmhg) (min.) Vaccum Degree Chart Work (Set at 450 C) (sec.) MODEL SVS-500AS Voltage 110 V, V, V AC 50/ 60 Hz Power Consumption 200 W (110 V, V) W ( V) Power Cord Length 1.5 m Temperature Iron Unit C Setting Range Desoldering Unit C Insulation Resistance Over 100 MΩ(500 V DC) Vacuum Pump System Diaphragm system Vacuum MPa (-600 mmhg) Accessories Cleaning pin TP-100CP-07 Soldering iron stand ST-76 Total Weight 4.0kg CONTROL BOX Output Voltage 110 V, V, V AC Dimensions 205 (W) x 170 (H) x 160 (D) mm Weight 3.6kg (w/o cord, hose ) DE UNIT Input Voltage/Power Consumption V, V AC / 85 W Ceramic Cord Length 1.2 m Dimensions 220 x 155 mm Weight 250 g (w/o cord, hose ) Standard Nozzle TP-100N-10 UNIT Input Voltage/Power Consumption V, V AC / 70 W Ground Resistance Less than 2 Ω Leak Voltage Under 2mV Ceramic heater Cord Length 1.2 m Length 190 mm (with PX-2RT-B w/o cord bushing) Weight 70 g (with PX-2RT-B w/o cord ) Standard Tip PX-2RT-B For replacement tips, nozzles, and optional parts, refer to p. 79 ST-76 soldering iron stand (included) SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 75

76 DE AUTOMATIC DE New open-valve mechanism achieves unrivalled vacuum power and start-up speed. TP-280AS ANTI LEAD STATIC FREE 400% MORE SUCTION CAPACITY With open-valve mechanism CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs SUPERIOR TEMPERATURE-CONTROL CIRCUIT To keep the temperature constant during desoldering ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy SUCTION CAPACITY COMPARISON The arrow indicates solder residue. TP-200AS TP-280AS SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS OPEN-VALVE MECHANISM Two-stage trigger switch (PAT.P) Step 1 Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber. Step 2 Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber. Solder Pull trigger fully Solder melted consecutively on 5 mm-dia land. Approx. 2 s / land. (with TP-100N-10 nozzle) Open-valve mechanism Negative pressure Vacuum chamber Trigger First stage switch Desoldering Unit ( ) 500 Nozzle temp. Pump NOZZLE TEMPERATURE-RECOVERY FEATURES The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450 mmhg) in only 0.1second. (about 4 times faster than our TP-200AS). (mmhg) Work (Set at 450 C) (min.) Vaccum Degree Chart Vacuum pressure compared with other goot models SVS-580AS TP-280AS SVS-500AS TP-200AS (sec.) MODEL TP-280AS Voltage 110 V,120 V, V AC 50/ 60 Hz Power Consumption 130 W (110 V,120 V) W ( V) Power Cord Length 1.5 m Temperature Setting Range C Insulation Resistance Over 100 MΩ(500 V DC) Vacuum Pump System Diaphragm system Vacuum MPa (-600 mmhg) Accessories Cleaning pin TP-100CP-13 Soldering iron stand ST-76 Total Weight Approx. 2.9 kg (w/o cord, hose ) CONTROL BOX Output Voltage 110 V, 120 V, V AC Dimensions 95 (W) x 205 (H) x 256 (D) mm Weight 2.6kg (w/o cord, hose ) DE UNIT Input Voltage/Power Consumption V, V AC / 85 W Ceramic Cord Length 1.2 m Dimensions mm Weight 250 g (w/o hose ) Standard Nozzle TP-100N-S5 For replacement tips, nozzles, and optional parts, refer to p. 79 ST-76 soldering iron stand (included) 76

77 Perfect for desoldering through-hole and multi-layered PCBs. TP-200AS POWERFUL VACUUM l Built-in powerful and compact twin pump. lwhen trigger is pulled, the heater heats up forcibly, reducing temperature decrease. lafter trigger release, the pump operates for approx. 0.5 seconds more, reducing solder clogs. Solder melted consecutively on 5 mm-dia land. Approx. 2 s / land. (with TP-100N-10 nozzle) Desoldering Unit ( ) 500 Nozzle temp ) (min.) Vaccum Degree Chart (mmhg) Work (Set at 450 C) ANTI STATIC NOZZLE TEMPERATURE-RECOVERY FEATURES (sec.) MODEL TP-200AS Voltage 110 V, V, V AC 50/ 60 Hz Power Consumption 130 W (110 V, V) W ( V) Power Cord Length 1.5 m Temperature Setting Range C Insulation Resistance Over 100 MΩ (500 V DC) Vacuum Pump System Diaphragm system Vacuum MPa (-600 mmhg) Accessories Cleaning pin TP-100CP-07 Soldering iron stand ST-76 Weight Approx. 2.9 kg (w/o cord, hose ) CONTROL BOX Output Voltage 110 V, V, V AC Dimensions 95 (W) x 205 (H) x 256 (D) mm Weight 2.6kg (w/o cord, hose ) DE UNIT POWERFUL VACUUM Everything from through-hole to multi-layered PCB CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy Input Voltage/Power Consumption V, V AC / 85 W Ceramic Cord Length 1.2 m Dimensions mm Weight 250 g (w/o cord, hose ) Standard Nozzle TP-100N-10 For replacement tips, nozzles, and optional parts, refer to p. 79 SURFACE MOUNT / SMT DES ST-76 soldering iron stand (included) HEATED TOOLS HAND TOOLS 77

78 DE PORTABLE DE GUNS Handy, portable Desoldering Gun with combined temperature-control circuit and desoldering mechanism PORTABLE DE GUNS TP-100/ 100AS POWERFUL VACUUM Everything from through-hole to multi-layered PCB CERAMIC HEATER WITH INTERNAL SENSOR A wide range for terminals, connectors and flat ICs ZERO VOLT SWITCH CIRCUIT Reduces noise during heater ON/OFF REPLACEABLE CARTRIDGE FILTER Makes changing the filter easy ANTI STATIC TP-100AS TP-100/100AS FEATURES Easy to Use Compact design with an internal motor, pump, and temperature-control circuit built into the grip. Portable and efficient. SURFACE MOUNT / SMT DES Powerful Vacuum Maximum vacuum of 0.08Mpa (-600 mmhg). Removes through-hole solder easily. Variable Temperature Setting Sensor feedback system allows temperature setting from C. Replaceable Cartridge Filter Makes changing the filter easy. Carry case included. Can be set from C. Anti-static Model TP-100AS HEATED TOOLS MODEL TP-100 TP-100AS Voltage V, V AC 50/ 60 Hz Power Consumption 80 W ( V), W ( V) Power Cord Length 1.5 m Temperature Setting Range C Insulation Resistance Over 100 MΩ (500 V DC) Vacuum Pump System Diaphragm system Vacuum MPa (-600 mmhg) Ceramic Standard Nozzle TP-100N-10 Cleaning pin TP-100CP-07/ Filter TP-100F Accessories Carry case Heat resistant pipe /Stand Dimensions mm Weight 470 g (w/o cord) Carry case with heat resistant pipe that allows the gun to be stored immediately after use. Also includes stand to rest the gun. HAND TOOLS For replacement tips, nozzles, and optional parts, refer to p

79 φ6 φ8.0 φ2.5 φ0.8 φ9.5 φ4.0 φ2.5 φ6.4 φ1.6 φ0.8 φ5.5 φ5.5 TP-100N-08 TP-100N-10* 2 TP-100N φ8.0 φ2.5 φ φ8.0 φ2.5 φ TP-100N-25 TP-100N-S1 TP-100N-S5* TP-100N-S REPLACEMENT TIPS SVS-800AS/580AS/500AS PX-2RT-SB PX-2RT-B PX-2RT-BC φ2.5 R S8 φ5.5 REPLACEMENT NOZZLES SVS-800AS/580AS/500AS/TP-280AS/TP-200AS/TP-100(AS) φ6.4 φ2.2 φ1.0 φ8.0 φ6.4 R S1 φ5.5 φ6.4 φ2.5 φ S5 Overall View (Standard) PX-2RT-2BC PX-2RT-3BC PX-2RT-2C φ3 φ6 3.2 PX-2RT-3C PX-2RT-4C PX-2RT-5C φ5.5 φ4 φ5.5 φ2.1 PX-2RT-1.6D PX-2RT-2.4D PX-2RT-3.2D φ5.5 φ8 φ1.6 φ5.5 φ2.4 PX-2RT-4D PX-2RT-5D PX-2RT-5K φ5.5 φ4 PX-2RT-8S Standard type Round solder-plated type φ5 φ5.5 φ5 PX-2RT-6E 4 16 φ5 φ5.5 φ3.2 ROUND SOLDER-PLATED TIP PX-2RT-2CR PX-2RT-3CR φ5.5 φ2.1 φ PX-2RT-4CR φ φ5 Overall View φ5 φ5.5 φ PX-2RT-5CR φ5 37 PX-2RT-B 16 7 φ7 Overall View (Slim) * 1 Model SVS-800AS, SVS-580AS, TP-280AS Standard Nozzle : TP-100N-S5 * 2 Model SVS-500AS, TP-200AS, TP-100(AS) Standard Nozzle : TP-100N-10 REPLACEMENT PARTS / OPTIONS REPLACEMENT PARTS FOR SVS-800AS/580AS/500AS *Desoldering Unit for SVS-800AS/SVS-580AS Iron Unit (common for SVS series) TP-28GAS SVS-50GAS Desoldering Unit for SVS-500AS for Soldering Iron TP-20GAS SVS-500H-1 for Desoldering Gun Barrel for Soldering Iron TP-100H TQ-77HP(S) Barrel for Desoldering Gun TP-100HP *Desoldering Unit for TP-280AS TP-28GAS TP-100H TP-100H Filter Filter Set (3pcs) TP-100F Cartridge Set TP-100K Felt Set (3pcs) TP-100FT Cleaning Pin Vice Pin vice body (The drill bit is not included.) TP-100PV Drill Bit ø0.7 mm TP-100DB-07 Drill Bit ø0.9 mm TP-100DB-09 Drill Bit ø1.4 mm TP-100DB-14 Drill Bit ø2.4 mm TP-100DB-24 Spacer for Soldering Iron TQ-77SS Collar for Soldering Iron TQ-77NUT *TP-28GAS Desoldering Unit is not interchangeable with TP-20GAS (SVS-500, SVS-500AS, SVS-550AS) REPLACEMENT PARTS FOR TP-280AS/200AS REPLACEMENT PARTS FOR TP-100/100AS COMMON PARTS Desoldering Unit for TP-200AS TP-20GAS Barrel TP-100HP *TP-28GAS Desoldering Unit is not interchangeable with TP-20GAS (TP-200, TP-200AS, TP-250AS) Filter Set TP-100F Steel Wool Cartridge Set TP-100K Steel Wool Barrel TP-100HP Steel Wool Only (3pcs) TP-100UL Felt B (10pcs) TP-100RFT Iron Unit SVS-800AS, SVS-580AS, SVS-500AS Collar Felt A Cartridge Felt A Cleaning Pin Felt B (3pcs) (1pcs) Barrel Felt B Tip Cleaning Pin ø0.7 mm (for ø0.8 & 1.0 mm nozzle) TP-100CP-07 ø1.3 mm (for ø1.5 & 2.5 mm nozzle) TP-100CP-13 Felt Set TP-100FT Steel Wool Felt A Cleaning Pin Vice Spacer Felt B TP-100PV (3pcs) SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 79

80 DE DE WICKS RMA base flux. DE WICKS CP/CPN series MSDS CONVENTIONAL DISPENSER PACK lhigh-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux. lcan be used for precision PCBs safely. DISPENSER PACK WITH STAINLESS STEEL MOUTH lcan be used for precision PCBs safely. lergonomic design will keep your fingers cool. SURFACE MOUNT / SMT DES MODEL Type Width Length CP-1515 Plain Knitting Approx. 1.5 mm CP-2015 Plain Knitting Approx. 2.0 mm CP-2515 Plain Knitting Approx. 2.5 mm Approx. 1.5 m CP-3015 Plain Knitting Approx. 3.0 mm CP-3515 Plain Knitting Approx. 3.5 mm ECONOMICAL PACKS OF 10PCS lwith convenient zipper bag. lcontains silica gel to reduce quality degradation. MODEL Type Width Length CP-15Y Plain Knitting Approx. 1.5 mm CP-20Y Plain Knitting Approx. 2.0 mm CP-25Y Plain Knitting Approx. 2.5 mm Approx. 2m CP-30Y Plain Knitting Approx. 3.0 mm CP-35Y Plain Knitting Approx. 3.5 mm BULK-LENGTH SPOOL lbargain extra-long wicks with spool. lmakes it easy to take anywhere. HEATED TOOLS HAND TOOLS MODEL Type Width Length CP Plain Knitting Approx. 1.5 mm CP Plain Knitting Approx. 2.0 mm CP Plain Knitting Approx. 2.5 mm Approx. 1.5 m CP Plain Knitting Approx. 3.0 mm CP Plain Knitting Approx. 3.5 mm MODEL Type Width Length CP-15B Plain Knitting Approx. 1.5 mm Approx. 30m CP-20B Plain Knitting Approx. 2.0 mm Approx. 30m CP-25B Plain Knitting Approx. 2.5 mm Approx. 20m CP-30B Plain Knitting Approx. 3.0 mm Approx. 20m CP-35B Plain Knitting Approx. 3.5 mm Approx. 15m 80

81 HALOGEN-FREE DE WICKS CPN SERIES MSDS ANTI STATIC l Available in packs of 10 only. l Does not intentionally contain halogens. l RMA non-wash flux is used. (J-STD-004: ROLO) l Plain-knitting wick recommended for lead-free applications with high heat conduction. l Anti-static case. l Contains silica gel to reduce quality degradation. l With convenient zipper bag. MODEL Type Width Length Quantity CPN Plain Knitting Approx. 2.0 mm Approx. 1.5 m 10pcs/ Pack CPN Plain Knitting Approx. 3.0 mm HALOGEN-FREE Less than 1,000 ppm each of chlorine, bromine, fluorine and iodine content (JEITA Standards) Rosin HALOGEN-FREE RMA flux Length 1.5 mm 2.0 mm for Width 2.5 mm 3.0 mm for 3.5 mm Quantity 1.5 m CPN CPN CP CP CP CP CP m CP CP CP CP CP CP-15Y 1 CP-20Y 1 2.0m CP-25Y 1 CP-30Y 1 CP-35Y 1 13m 1 15m CP-35B 1 20m CP-25B 1 CP-30B 1 30m CP-15B 1 CP-20B 1 SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 81

82 DE DE SUCKERS Manual pumps suck up solder. Plunger pumps are light, strong, and economical. DE SUCKERS GS series SELF-CLEANING SHAFT When the plunger is pushed, a piston extends out the nozzle. This prevents solder build-up. GS-100 Priming plunger cuum SELF-CLEANING SHAFT To prevent solder clogs JUMBO SIZE Large vacuum capacity PLUNGER LOCK FUNCTION Portable, compact storage PLUNGER LOCK FUNCTION The plunger can be stored inside the shaft by pushing it in completely, and pressing the vacuum release button. Compact storage. Vacuum release button Priming plunger Shaft GS-154 GS-158 SELF-CLEANING SHAFT To prevent solder clogs PLUNGER LOCK FUNCTION Portable, compact storage ANTI-STATIC MATERIAL On the nozzle SELF-CLEANING SHAFT To prevent solder clogs ANTI-STATIC MATERIAL On the nozzle SURFACE MOUNT / SMT DES GS-108 GS-104 SELF-CLEANING SHAFT To prevent solder clogs PLUNGER LOCK FUNCTION Portable, compact storage MODEL GS-100 GS-104 GS-108 Color ivoly Length 330 mm 275 mm 190 mm When Stored 240 mm 205 mm Weight 89 g 65 g 25 g Diameter ø23 mm ø19 mm ø14 mm Applicable Nozzle GS-100N GS-108N MODEL GS-150 GS-154 GS-158 Color Black Length 330 mm 275 mm 190 mm When Stored 240 mm 205 mm Weight 89 g 65 g 25 g Diameter ø23 mm ø19 mm ø14 mm Applicable Nozzle GS-150N GS-158N SELF-CLEANING SHAFT To prevent solder clogseasy HEATED TOOLS GS-150 SELF-CLEANING SHAFT To prevent solder clogs PLUNGER LOCK FUNCTION Portable, compact storage JUMBO SIZE Large vacuum capacity φ3.2 φ2.6 REPLACEMENT NOZZLES GS-100N GS-108N GS-150N GS-158N 12.4 φ2.6 φ3.2 HAND TOOLS ANTI-STATIC MATERIAL On the nozzle 82

83 AIR PURIFYING FUME VACUUM SS-60 ANTI-STATIC MATS WD-13/130 WRIST STRAPS WS-11/12 SURFACE RESISTIVITY METER LOW-DUST/ANTI-STATIC GLOVES SOLDER ASSIST PRECISION TWEEZERS HEAT CLIPS TIP REFRESHER TIP CLEANERS IRON STANDS SOLDER REEL HOLDERS MAGNIFIERS MINI VISE CORE ALIGNMENT TOOLS CERAMIC CORE DRIVERS MAINTENANCE TOOL SETS WA-400 WG series SA-10 TS series H series BS-2 ST-30/40/70 ST-27/28/11 S T / 7 5 V/76/77 ST-51/52/53 ST-91/92/93 ST-80 CD-10 CD series TL-10/20 SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 83 83

84 AIR PURIFYING TYPE FUME VACUUM For cleaner work environment AIR PURIFYING TYPE FUME VACUUM SS-60 SUCK AND CLEAN FROM TWO LOCATIONS with one unit EASY FILTER REPLACEMENT Easy to set up ltwo fume extraction ducts for use at two separate workstations simultaneously. *Duct Hose (Optional) required. Pre-Filter SS-60PF Pre-Filter Set SS-60PFS Main-Filter SS-60MF SURFACE MOUNT / SMT DES REPLACEMENT PARTS / OPTIONS Pre-Filter SS-60PF Main-Filter SS-60MF Filter Set SS-60PFS Duct Hose SS-60D MODEL Voltage Power Consumption Noise Level Smoke Exhaust Collection Efficiency Duct Hose Length Suction Capacity Power Cord Length Dimensions Weight SS V, V AC 50/60 Hz 240 W 60dB (at 1m from the unit) 2 ducts (ø75 mm) 95% 0.3μm ø75 mm x 1.2 m Max.165 m 3 /h (single duct operation) 1.5 m inlet type 300 (W) 455 (H) 300 (D) mm 16 kg HAND TOOLS HEATED TOOLS 84

85 ANTI-STATIC MATS/WRIST STRAPS Suitable for assembly rooms (for IC or electrical components) to prevent static charge. ANTI-STATIC MATS WD-130/WD-13 lmatte green. lavailable for work desks and floors. Model Length Width Thickness WD m WD-13 2m 1 m 2 mm Double structure static-diffusion layer (green) : 0.5 mm conductive layer (black) : 1.5 mm Material/ Hardness Synthtic Rubber/65 Surface Resistivity Surface (green) Bottom (black) Ω/ sq Ω/ sq Item Model Specifications Ground Wire Plate WD-1E mm/2 pieces / 2m cords Short Plate WD-1P mm/10 pieces Ground Wire Set WD-1 g 3.1 m Aluminum Tape WD mm (T) x 30 mm (W) x 20m (L) OPTION WD-1E WD-1P WD-3020 WD-1 g Screw Connector ø10mm Hole Connector Plate lelastic & scissible rubber sheet. Conductive layer ANTI STATIC Grounding Cord Connector Ground How To Use WD-1 g Desk Mat (Ground Wire Set) l Make a 10 mm hole in the mat. l Place the connector plate under the hole in the mat. Secure the connector using the screw. l Connect the grounding cord to the connector on the mat. l The banana strap used with the WS-11/12 can also be connected to the connector on the mat. Static-diffusion layer Avoid electrostatic discharge and protect sensitive electronic devices. WRIST STRAPS WS-11/12 llarger snap with improved durability. ladjustable band length. l1mω resistor in electrical path from person to ground. MODEL Cord Length Cord Material Band Width WS m Polyurethane 20 mm WS m REPLACEMENT PARTS / OPTIONS Wrist Band for WS-11 /12 Alligator Clip for WS-11 /12 WS-11-1 WS-11-3 Coil cord for WS-11 WS-11-2 Coil cord for WS-12 WS-12-2 Color LED measurement display. Compact and portable. SURFACE RESISTIVITY METER WA-400 lmeasures the Surface Resistivity [Ω/sq], Resistance to Ground (RTG) [Ω] and Resistance between two points (RTT), of floors, work surfaces, conductive materials, and anti-static accessories. lcompact and powered by single 9 V battery (006P). lmeasurements instantly displayed in three-color LED. RTT Test Jack Measures the Resistance between two points with two included leads. When measuring RTT, the Surface Resistivity electrodes on the rear of the unit become inactive. MODEL Power Supply Ranges Battery Life Dimensions Weight AccessoriesAccessories ANTI STATIC Range Classification LED Display Less than 10 5 Ω (Ω/sq) Conductive Green Between 10 6 and Ω (Ω/ Dispassive Orange sq) More than Ω (Ω/sq) Insulative Red RTG Test Jack Measures the Resistance to Ground between the Surface (rear electrodes) and ground point with an included lead. Surface Resistivity Electrodes Surface Resistivity Testing Place the meter on the test surface. RTG Test Measures the Resistance to Ground between the Surface (rear electrodes) and ground point with an included lead. WA V (006P) Battery Ω / sq (Surface Resistivity) Ω (RTG & RTT) Approx. 40 hours 61 (W) 26 (H) 96 (D) mm 70 g (w/o battery) 2 x Test Wires SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 85

86 GLOVES / SOLDER ASSIST Low dust-shedding with woolly nylon. Ideal for clean rooms. LOW-DUST GLOVES / ANTI-STATIC GLOVES WG series WG-1/2 series LOW-DUST GLOVES lseamless and elastic for perfect fit. Hold small components safely. lsuperior ventilation with polyurethane resin coating on fingertips only, or palm. lmachine washable. WG-3/4 Series ANTI-STATIC GLOVES ANTI STATIC lremove static charge quickly with woolly nylon & conductive fiber material. lhigh elasticity. Perfect for holding small components. Surface resistance: Ω LOW-DUST GLOVES MODEL Coating Size A B WG-1S S mm WG-1M Fingertip Coating M mm WG-1L L mm WG-2S S mm WG-2M Palm Coating M mm WG-2L L mm ANTI-STATIC GLOVES MODEL Coating Size A B WG-3S S mm WG-3M Fingertip Coating M mm WG-3L L mm WG-4S S mm WG-4M Palm Coating M mm WG-4L L mm WG-1/2 series WG-3/4 series Fingertip Coating WG-3 シリーズ Palm Coating WG-4 シリーズ HAND TOOLS B SURFACE MOUNT / SMT DES B Convenient set of 6 tools for assembling and repairing PCBs. SOLDER ASSIST SA-10 Offset chip holder Split 45 lever Square scraper/chisel Curved needle Square tapered reamer Stainless steel brush NOTE: The polyurethane resin coating is not an anti-static material. 45 chip holder HEATED TOOLS Fork shaft Knife Spring hook Tapered reamer Brass brush NOTE : Not sold individually. SUGGESTED USES A Lever Removes ICs or condensers. Hook Removes components such as resistors. Brush Removes solder scraps, PCB mask ink or rust. Fork Shaft Bends lead wires in required directions. Needle Removes flat ICs. A Polyurethane Chip Holder Holds chips and micro components for soldering work. Knife Removes PCB mask ink or rust, or cuts unnecessary circuits. Scraper Removes PCB mask ink or rust, or strips lead wires. Reamer Opens or enlarges holes. MODEL Size Weight SA-10 Approx. 180 mm Approx. 60 g 86

87 TWEEZERS Ideal for assembly work such as soldering PCBs or replacing parts. PRECISION TWEEZERS [STANDARD] TS-10 TS-10 SST Extra-fine tip with sharp and strong edges. PRECISION TWEEZERS [ULTRAFINE] TS-14 TS-14 SST MODEL Tip Shape Length Weight TS-10 Standard Approx. 120 mm Approx. 19 g Longer tip and overall length, best for holding tiny components. PRECISION TWEEZERS [LARGE] TS-11 TS-11 MODEL Tip Shape Length Weight TS-11 Large Approx. 140 mm Approx. 15 g Small-sized tweezer in standard model. BEST with DELICATE WORK. [SMALL-SIZED] TS-12 TS-12 MODEL Tip Shape Length Weight TS-12 Standard Approx. 115 mm Approx. 15 g Round tip prevents damage to components. PRECISION TWEEZERS [ROUND] TS-13 TS-13 MODEL Tip Shape Length Weight TS-13 Round Approx. 120 mm Approx. 19 g Protects components from excess heat from soldering iron. HEAT CLIPS [HEAT SINK] H-1S/1L/2SL H-1L is suitable for reaching into narrow spaces. H-2SL is a set of H-1S and H-1L. MODEL Material Length Weight H-1S 70 mm 4.5 g H-1L Aluminum 68 mm 4.5 g H-2SL A set of H-1S and H-1L SST SST SST MODEL Tip Shape Length Weight TS-14 Extra fine Approx. 115 mm Approx. 17 g Eagle-beak tweezers with bent tip. PRECISION TWEEZERS [EAGLE BEAK] TS-15 MODEL Tip Shape Length Weight TS-15 Curved Approx. 120 mm Approx. 15 g Open TS-15 Self-closing, reverse action. Ideal for holding parts when soldering. SST PRECISION TWEEZERS [REVERSE ACTION] TS-16/17 Press TS-16 TS-17 MODEL Tip Shape Length Weight TS-16 Standard Approx. 120 mm Approx. 20 g TS-17 Round Approx. 165 mm Approx. 30 g H-1S SST H-1L SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 87

88 TIP CLEANER/ IRON STANDS Improves oxidized soldering tips. TIP REFRESHER BS-2 MSDS lremoves oxides on tips, re-coats the tip with tin, and restores solder wetting capability. For any type of soldering iron: nichrome or ceramic. IRON STANDS ST-11/75/75 V/76/77 BEFORE AFTER HOW TO USE 1. Optimal tip temperature for cleaning is 300 C-360 C. 2. Rub the tip in the tip refresher. 3. Apply solder to the tip, and clean the tip with the sponge of the soldering iron stand. 4. Apply solder again. You are finished. If wetting capability is not enough, repeat steps 2 & 3. MODEL Composition NET Content No water, so less heat loss. TIP CLEANER ST-40 BS-2 Ammonium phosphate, Tin Powder 9 g ANTI STATIC lthe holder is made of slipproof, heat-resistant silicon rubber. Its special shape prevents solder-slag flying around. l1 ball of brass wool is included. ST-11 For ceramic-heater soldering iron only Cannot be used for HRC series Angle adjustable up to 60 ST-76 ST-75 Angle adjustable up to 60 MODEL Width Depth Height Weight ST mm 110 mm 130 mm 350 g ST mm 110 mm 115 mm 410 g ST-75 V 110 mm 125 mm 125 mm 480 g ST mm 110 mm 140 mm 490 g ST mm 160 mm 148 mm 400 g Only for ceramic soldering iron. HRC series compatible IRON STAND ST-27 ST-75 V ST-77 SURFACE MOUNT / SMT DES MODEL Width Height Weight ST mm 60 mm 80 g Simple, portable, fold-away cleaner. Can be kept in a tool box. TIP CLEANERS ST-30/70 MODEL Width Depth Height Weight ST mm 178 mm 106 mm 485 g Just for XST-80 series. TWEEZERS STAND Built especially for XST-80 series. ST-28 HEATED TOOLS HAND TOOLS ST-30 ST-70 MODEL Width Depth Height Weight ST mm 87 mm 45 mm 35 g ST mm 110 mm 60 mm 70 g REPLACEMENT PARTS / OPTIONS ST-11 Sponge ST-11SP ST-22/27/28/53 Sponge ST-53SP ST-30 Sponge ST-30SP MODEL Width Depth Height Weight ST mm 178 mm 106 mm 515 g ST-70/75/76/77/75 V Sponge ST-70/75SP ST-22/27/28/ 40 Cleaner (2pcs) ST-40BW 88

89 IRON STANDS/MAGNIFIERS Superior stability SOLDER REEL HOLDERS ST-51/52/53 lmaximum load of 1 kg. Heavy base ensures extra stability. Guide spring prevents solder tangle. Comes with carrying handle. Solder is not included. ST-53 ST-51 For ceramic-heater soldering iron only Cannot be used for HRC series 3X magnification with a diameter of 90 mm acrylic bifocal lens. MAGNIFIERS ST-91/92/93 ST-91 Stable base makes safe soldering work. ST-92 ST-53 soldering iron stand attaches to either side of the reel holder. ST-93 ST-52 lboth the upper and lower spindles can be mounted with up to 1 kg solder reels. ST-93 has small & large flexible clips. MODEL Width of Clip 度 Width Depth Height Weight ST-91 ー 95 mm 170 mm 190 mm 410 g ST mm 120 mm 160 mm 130 mm 550 g ST mm 150 mm 245 mm 280 mm 1000 g Rubber suction base easily fixes to any work table. MINI VISE ST-80 Makes soldering work easier by holding small components. SURFACE MOUNT / SMT MODEL Width Depth Height Weight ST mm 620 g 92 mm 120 mm ST mm 870 g ST mm 150 mm 126 mm 1100 g Applicable Soldering Iron Dimensions for ST-53/76/77 PERFECT CHOICE OF TIP CLEANER AND IRON STAND Item Model MODEL Width of Clip 度 Width Depth Height Weight ST mm 80 mm 90 mm 70 mm 110 g C A B A B C Under ø14mm Under ø28mm Under 105mm Nichrome Type Ceramic Type Tempurature Controlled KS HOT CA HP HRC Best Good CS-21 CS-31 CXR-31 CXR-41 CXR-60 CXR-80 CXR-100 TQ PX-335 PX-338 PX-342 PX-201 PX-401 PX-501(AS) PX-601(AS) ST-30 Tip Cleaner ST-70 ST-11 ST-27 Soldering ST-75 Iron Stand ST-76 ST-77 DES HEATED TOOLS HAND TOOLS 89

90 CORE DRIVERS/TOOL SETS For adjusting high frequency coils. CORE ALIGNMENT TOOLS CD-10 A must-have! MAINTENANCE TOOL SETS TL-10/20 5 alignment tools to adjust potentiometers, IFT coils, and high frequency coils. Made of plastic. Can be used safely for high-voltage parts. NOTE: Not sold individually. MODEL CD-1 CD-2 CD-3 CD-4 SIZE Length Weight 127mm 3.2g CD-5 For trimmer potentiometer diam. φ7.8, inner diam. φ5.8 MODEL CD mm 131mm 137mm 136mm Item Core Alignment Tools (5 tools per set) Best adjusting tool for high-frequency components. CERAMIC CORE DRIVERS CD series 3.1g 3.5g 4.2g 2.2g Non-conductive, anti-magnetic, and long-life screwdriver with zirconia cecramic tip. Best adjusting tool for high-frequency components such as in Tuner, TV, Radio, Transceiver. TL-20 No. Contents No. Contents No. Contents 1 Cutting nippers 8 Screwdriver (+) No.0 15 Solder assist (Reamer) 2 Pliers 9 Screwdriver (+) No.1 16 Solder assist (Fork & Remover) 3 Cutting pliers 10 Screwdriver (+) No.2 17 Desoldering wick 4 Tweezers 11 Hexagonal wrench 5.5 BOX 18 Tip cleaner 5 Miniature screwdriver ( ) 12 Soldering iron 19 Cutter knife 6 Screwdriver ( ) 4.0 mm 13 Solder 20 File 7 Screwdriver ( ) 5 mm 14 Desoldering pump 21 Tool bag SURFACE MOUNT / SMT DES CD-15 CD-20 CD-25 CD-100 MODEL Length Weight Tip size Tip type CD (W) x 0.4 (D) mm CD-15T CD (W) x 0.4 (D) mm CD-20T 115 mm 5 g CD (W) x 0.4 (D) mm CD-25T CD-100 No.0.+ CD-100T TL-10 HEATED TOOLS TIP SHAPES CD-15T CD-20T CD-25T CD-100T REPLACEMENT PARTS / OPTIONS Tip for CD-15 ( mm) CD-15T Tip for CD-20 ( mm) CD-20T No. Contents No. Contents 1 Pliers 8 Screwdriver ( ) 5 mm 2 Cutting nippers 9 Hexagonal wrench 5.5 BOX 3 Tweezers 10 Desoldering wick 4 Miniature screwdriver (-) 11 Tip cleaner 5 Screwdriver (+) No.1 12 Solder 6 Screwdriver (+) No.2 13 File 7 Soldering iron 14 Tool bag HAND TOOLS Tip for CD-25 ( mm) Tip for CD-100 (No.0 +) CD-25T CD-100T 90

91 PASTES BS-10/15/850 ANTI-SEIZE BS-H20B ANTI-SEIZE BS-H20B SPECIAL SPOOL SOLDERS SE series SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 91 91

92 Provides improved soldering performance. PASTES BS-10/15/850 Improves wettability. BS-15 MSDS NOTE: BS-10/15 is a weakly acidic paste. Cannot be used on PCBs. Improves oxidized soldering tips. TIP REFRESHER BS-2 lremoves oxides on tips, re-coats the tip with tin, and restores solder wetting capability. HOW TO USE 1. Optimal tip temperature for cleaning is 300 C-360 C. 2. Rub the tip in the tip refresher. 3. Apply solder to the tip, and clean the tip with the sponge of the soldering iron stand. 4. Apply solder again. You are finished. If wetting capability is not enough, repeat steps 2 & 3. MODEL Composition NET Content BEFORE MSDS BS-2 Ammonium phosphate, Tin Powder 9 g AFTER Good for PCB lead wires and electric components. BS-850 For soldering tips & nozzles ANTI-SEIZE BS-H20B Cap with brush MSDS SURFACE MOUNT / SMT PASTES MODEL BS-10 BS-15 NET Content 10 g 50 g Vaseline : Wt% Zinc chloride : 4-6 Wt% Composition Water : 2-4 Wt% Paraffin : 6-9 Wt% Ammonium chloride : 1-3 Wt% Effectively protects metal from high temperatures and seizing. Paste type. Brush included in the cap makes easy application to rough surfaces or hard-to-reach parts and places. Perfect for nozzle-threaded part of TP & SVS series. Neutral PH7. DES ROSIN based PASTE MODEL NET Content Composition BS g Rosin : Wt% 2-Methyl-2 4Pentanediol : Wt% Organic acid : Less than 1 Wt% Thixotropic agent : 4-6 Wt% Activator : 1-3 Wt% MODEL NET Content Composition Heat resistance BS-H20B 20 ml Boron Nitride 25% Water 70-80% Mg-Al Silicate Less than 5% 900 C HEATED TOOLS HAND TOOLS Industry-standard composition SOLDERS SF-A series (Rosin core) MSDS LEAD FREE SOLDERS SF-A series ( Industry-standard composition) MODEL Composition (Sn-Ag-Cu) M.T. Dia. Length (reference) Weight Rosin SF-A0403 ø0.3 mm 107 m SF-A0404 ø0.4 mm 60 m SF-A C ø0.6 mm 27 m 45 g Rosin core SF-A0408 ø0.8 mm 15 m SF-A0410 ø1.0 mm 10 m 92

93 Low-Ag type SOLDERS SF-B series (Rosin core/ Non-rosin core) SOLDERS SF-B series (Low-Ag type) MODEL Composition (Sn- Length M.T. Dia. Ag-Cu) (reference) Weight Rosin SF-B1003 ø0.3 mm 225 m SF-B1004 ø0.4 mm 127 m SF-B1006 ø0.6 mm 56 m SF-B1008 ø0.8 mm 32 m Rosin core SF-B C ø1.0 mm 20 m 100 g SF-B1012 ø1.2 mm 14 m *SF-B1012N ø1.2 mm 14 m None SF-B1016 ø1.6 mm 8 m Rosin core *SF-B1016N ø1.6 mm 8 m None SF-B4006 ø0.6 mm 225 m SF-B4008 ø0.8 mm 127 m C SF-B4010 ø1.0 mm 81 m 400 g Rosin core SF-B4012 ø1.2 mm 56 m SF-B8008 ø0.8 mm 253 m SF-B C ø1.0 mm 162 m 800 g Rosin core SF-B8012 ø1.2 mm 113 m NOTE: SF-B1012N & SF-B1016N are not rosin core. They require metal-working flux. Eco-friendly HALOGEN-FREE SOLDERS SF-N series (Rosin core) MSDS LEAD FREE MSDS LEAD FREE SOLDERS HALOGEN-FREE SF-N series lhigh-reliability residue after soldering. Wash-free available. Does not intentionally contain halogens. Fewer than 1,000 ppm each of chlorine, bromine, fluorine, and iodine. (JEITA Standards) MODEL Composition (Sn-Ag-Cu) M.T. Dia. Length (reference) Weight Rosin SF-N0406 ø0.6 mm 27m SF-N C ø0.8 mm 15m 45 g Rosin core SF-N0410 ø1.0 mm 10m Special purpose SPECIAL SPOOL-SOLDERS SE special series MSDS MODEL Item Composition (Sn-Pb) M.T. Dia. Weight Length (reference) Rosin SE-06003RMA RMA WASH FREE 60-40% C ø0.3 mm 180 m 100 g SE-06006RMA SOLDER ø0.6 mm 48 m Rosin core SE-0AG08 Ag solder (Ag)% C ø0.8 mm 27 m Rosin core SE Eutecitc solder 63-37% C ø0.8 mm 27 m 100 g SE-0ST16 Stainless-use solder 63-37% C ø1.6 mm 7 m Non-rosin core SE-0BA16 Metal-work solder 45-55% C ø1.6 mm 6 m SE ø1.0 mm 17 m SE ø1.2 mm 12 m 100 g SE ø1.6 mm 7 m SE ø2.0 mm 4 m SE ø1.0 mm 85 m SE Pb containing ø1.2 mm 60 m 50-50% C 500 g SE solder ø1.6 mm 35 m Rosin core SE ø2.0 mm 20 m SE-K5010 ø1.0 mm 170 m SE-K5012 ø1.2 mm 120 m 1 kg SE-K5016 ø1.6 mm 70 m SE-K5020 ø2.0 mm 40 m SE ø0.6 mm 48 m SE ø0.8 mm 27 m SE ø1.0 mm 100 g 17 m SE ø1.2 mm 12 m SE ø1.6 mm 7 m SE ø0.6 mm 240 m SE ø0.8 mm 135 m Pb containing SE % C ø1.0 mm 500 g 85 m solder SE ø1.2 mm 60 m Rosin core SE ø1.6 mm 35 m SE-K6006 ø0.6 mm 480 m SE-K6008 ø0.8 mm 270 m SE-K6010 ø1.0 mm 1 kg 170 m SE-K6012 ø1.2 mm 120 m SE-K6016 ø1.6 mm 70 m NOTE: SE-0ST16 & SE-0BA16 are not rosin core. They require flux. SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 93

94 MI-6-6 V TQ-77 RX-85GAS RX-80GAS GP-510 KX-30R CS-31 SURFACE MOUNT / SMT KS-30R HP-300 DES TQ-95 HEATED TOOLS HAND TOOLS PX-338 CXR

95 HEATED TOOLS HOT BOND MINI HOT BOND HOT STICKS HOT KNIVES HOT SLICER HB-80 HB-45 HB-100S/200S/40S HOT-30R/60R HE-110 HIGH SURFACE-MOUNT / SMT SURFACE MOUNT / SMT DES DES HEATED HEATED TOOLS TOOLS HAND HAND TOOLS TOOLS 95 95

96 HEATED TOOLS HOT BOND/POWER CONTROLLER Glue things easily. HOT BOND HB-80 l Many uses! Easy operation! l Hobby/Industrial use. Load the gun with "hot stick" glue. The gun melts the glue. FEATURES FOR Repairing, adhering, or filling porous materials such as wood, paper, cloth, or leather. Tentative fixing of plastic, metals,earthenware, or glass. Built-in Safety Fuse SURFACE MOUNT / SMT DES OPERATION HOT STICK APPLICATIONS Good for interior design, display, wrapping and packing, bookbinding, repair of cracks/shoes/ bags, bonding of lead wire, prefixing components, etc. NOTE Data (right) is measured values. This is not a warranty. Reheating will melt hot stick again. Please test carefully for suitability to your situation. TAIYO is not responsible for misuse. For hobby use Only 10 seconds to bond and 1-4 minutes to harden completely. Suitable for both soft & rough surfaces. Glue sticks do not contain any solvent and are 100% solid. Easy to use and to keep. MINI HOT BOND HB-45 l Hobby/Industrial use. Compact. Main composition Ethylen - Vinyl Acetate Soften point 84 C (Ring & ball) Open time 30 s Setting time 18 s Viscosity 180 C cps 170 C cps Peeling strength Canvas 2.59 kg/ cm Glue strength Share strength PVC-PVC kg/ cm 2 PVC-ABS 24.33kg/ cm 2 MODEL HB-80 Voltage V AC 50 / 60 Hz Power Consumption 14 W Nozzle Temp. 160 C PTC Power Cord Length 1.4m Dimensions 185 (W) x 155 (H) mm Weight 220 g Accessories Hot Sticks 4pcs (Approx. ø11 x 100 mm), Wire Stand *The length does not include the cord bushing. The weight does not include the cord. HB-80N-B HB-80N-SB HB-80N-2D Standard HB-80N-B ()Nozzles φ1.8 φ 5 HB-80N-SB ( )23 HB-80N-2D ( )( ) 内税別 HEATED TOOLS HAND TOOLS MODEL HB-45 Voltage V AC 50 / 60 Hz Power Consumption 7 W Nozzle Temp. 160 C PTC Dimensions 130(W)x115(H)mm Weight 100 g Accessories Hot Sticks 3pcs (Approx. ø7 x 100 mm), Wire Stand *The length does not include the cord bushing. The weight does not include the cord. HB-45 Built-in Safety Fuse 96

97 Glue stick for hot bond HOT STICKS HB-100S/200S MSDS lhot stick (solid glue) for HB-80. MODEL Color Length/mm Weight/g Quantity HB-100S Approx HB-100S-B1 Approx Approx. ø11x100 HB-100S-1K 1 k Approx. 100 HB-100S-10K TP 10 k Approx HB-200S Approx HB-200S-1K Approx. ø11x200 1 k Approx. 50 HB-200S-10K 10 k Approx. 520 Glue stick for mini hot bond HOT STICKS MSDS HB-40S lhot stick (solid glue) for HB-45 MODEL Color Length/mm Weight/g Quantity HB-40S Approx HB-40S-B1 Approx. 300 Approx. 72 TP HB-40S-1K ø k Approx. 250 HB-40S-10K 10 k Approx. 2,500 HB-100S-1K HB-200S HB-40S-B1 HB-100S-B1 SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 97

98 26 HEATED TOOLS HOT KNIVES/HOT SLICER For plastic models HOT KNIVES HOT-30R/60R lcomes with soldering tip, rosin core solder and soldering iron stand, so it can be used as a soldering iron. For nylon net or cloth HOT SLICER HE-110 lbest for heat slicing of nylon garden nets, fish nets, promotional flags, etc. lthe sliced end does not fray. SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS φ Cutting ability within 5 seconds. Cutting Ability Cross section view of sample material HOT-30R HOT-60R <Round bar> Plastic Types Thickness Bar (Dia.) Thickness Bar (Dia.) Vinyl Chloride 0.5 mm 2 mm 1 mm 3 mm Diameter (mm) Acrylic 0.5 mm 2 mm 1 mm 3 mm <Board> ABS 1 mm 3 mm 2 mm 4.5 mm 10mm Polypropylene 1 mm 3 mm 1 mm 3 mm Thickness (mm) Polycarbonate 1 mm 3 mm 1 mm 3 mm HOT-30R R-48B 9 R HOT-60R R-6BC 1.6 REPLACEMENT PARTS / OPTIONS HOT-30R KS-30H φ φ6 REPLACEMENT TIPS HOT-30CU HOT-60R KS-60H MODEL HOT-30R HOT-60R Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz 30 W equiv. 60 W equiv. Power Consumption Power consumption may vary according to location and item specs. Please see Products power consumption and safety standard p.6 Nichrome Length 230 mm 250 mm Weight 50 g 65 g *The length does not include the cord bushing. The weight does not include the cord. 87 HOT-60CU 87 φ4 φ6 *Not for linen, cotton, or metal wire. *Can't be used for soldering MODEL Voltage Power Consumption Length Weight HE-110TL HE-110TL Cutting mat REPLACEMENT PARTS / OPTIONS HE-110 CXR-100H REPLACEMENT TIPS HE V, V AC 50/ 60 Hz 38 W Ceramic 284 mm 104 g *The length does not include the cord bushing. The weight does not include the cord. 98

99 HAND TOOLS SUPER CUTTERS AIR-POWERED DEPANELING TOOL YN-25AS/26AS/27AS YN-300 HOBBY NIPPERS YN-1/ 3/ 4 HOBBY PLIERS YP-1/ 3/ 4 PRECISION NIPPERS YN-10AS / 13AS 1.5 mm PLATFORM NIPPERS YN-104 PRECISION PLIERS MANUAL DEPANELING TOOLS CRIMPING PLIERS WIRE STRIPPERS YP-10 YN-215AS / YN-220AS YP-201 YS-1 PRECISION WIRE STRIPPERS YS-2 / 3 CABLE STRIPPERS YS-100 / 101 SURFACE-MOUNT / SMT DES HEATED TOOLS HAND TOOLS 99 99

100 HAND TOOLS SUPER CUTTERS/HOBBY HAND TOOLS SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS Light & Compact. Suitable for hobby work. HOBBY HAND TOOLS mini YN/YP series MINI NIPPERS YN-1 MINI PLIERS YP-1 MINI PLIERS YP-3 MINI NIPPERS MINI PLIERS MINI NIPPERS (FOR PLASTIC) YN-3 MINI NIPPERS YN-4 MINI PLIERS YP-4 MODEL Max. Cut Dia. Length YN mm YN-3 ø1.8 mm (copper wire) 118 mm YN mm MODEL Max. Cut Dia. Length YP-1 ø1.2 mm (soft iron) 124 mm YP-3 ø1.6 mm (soft iron) 145 mm YP-4 ø1.6 mm (soft iron) 160 mm Fabulous cutting ability. Rockwell hardness HRC62. SUPER CUTTERS YN-25AS Flush Cutting Edge lball-bearing grade steel lblack oxide coated to resist rust lanti-static model Fabulous cutting ability. Rockwell hardness HRC58. SUPER CUTTERS YN-26AS/27AS YN-26AS lhigh-quality steel lanti-static model YN-27AS Flush Cutting Edge YN-26AS MODEL Max. Cut Dia. Length YN-25AS ø1.3 mm (Copper wire) 122 mm YN-26AS ø1.3 mm (Copper wire) 122 mm YN-27AS ø1.0 mm (Copper wire) 122 mm ANTI STATIC ANTI STATIC Depaneling tool for cutting PCB tabs. AIR-POWERED DEPANELING TOOL YN-300 NEW Blade not included. luses compressed airleasy continuous operation with compressed air.lsuitable for many kinds of PCBs in small lot production. MODEL Compressed Air Pressure Consumption Blade Material Approximate Dimensions (not including the blade) Weight PCB Specifications V For depaneling PCBs MANUAL DEPANELING TOOL YN-215AS/ 220AS C L 20 YN-215AS 6 MODEL Length Weight Blade Thickness YN-215AS 1.5 mm 147 mm 95 g YN-220AS 2.0 mm Specifications YN Bar Tube ø6 3.5 Nl/ min Tempered steel Approx. 210 x 35 mm 400 g 20 YN-220AS 7 YN-215AS YN-220AS A 1.6 mm or more 2.1 mm or more B 2.5 mm or less C 25 mm or more D 2.0 mm or less 2.0 mm or less PCB thickness Slot length (L) Slot width (V) Slot width tolerance Replacement blade/ Replacement blade set Replacement blade YN-300- B series 1.6 mm max. min. 13 mm max. 70 mm 1.5 mm / 1.8 mm / 2.0 mm (Depends on blade) mm Distance between slots (A) 1 mm 3 mm (tole mm) Protrusion (S) max mm Lower area of PCB free of 1.9 mm min. components (C) Replacement blade set YN-300-SB15 YN-300-SB18 YN-300-SB20 MODEL Replacement blade YN-300-B15 YN-300-B18 YN-300-B20 Blade thickness 1.5 mm 1.8 mm 2.0 mm Blade Material Tempered steel A 1.5 mm 1.8 mm 2.0 mm PCB B 1-3 mm application size C min. 13 mm-max. 70 mm D max. 1.6 mm Replacement blade Replacement blade 1.5 mm (LDPP15) YN-300-B15 Replacement blade 1.8 mm (LDPP18) YN-300-B18 Replacement blade 2.0 mm (LDPP20) YN-300-B20 A SLOT C S lfor depaneling PCBs with slits, or perforations. lonly light force required. Less flex, and less stress. lapplicable for CEM-3 PCBs YN-220AS C Replacement blade set YN-300- SB series Replacement blade set Replacement blade set 1.5 mm (LPDPP15) YN-300-SB-15 Replacement blade set 1.8 mm (LPDPP18) YN-300-SB-18 Replacement blade set 2.0 mm (LPDPP20) YN-300-SB-20 ANTI STATIC B A D 100

101 I I HAND TOOLS PRECISION NIPPERS Micro Nippers FLAT CUTTING SURFACE YN-10/12/13/17/20 21 Unit :mm A 21 B B A C C E E L lflat cutting edges that do not put any load on the body of the component. For cutting precision components, lead wires, etc. lthe YN-10 and 12 have a safety clip for holding wire scraps securely after cutting. NOTE: Use only for cutting copper wire. L Flush Cutting Edge MODEL Max. Cut Dia. A B C E I L YN-10 ø YN-12 ø YN-13 ø YN-17 ø1.3 (Thin blade) YN-20 ø Anti-static type. PRECISION NIPPERS YN-10AS/13AS Unit :mm lflat cutting edges that do not put any load on the body of the component. For cutting precision components, lead wires, etc. lthe YN-10AS has 21 a safety clip for holding wire scraps securely after cutting. NOTE: Use only for cutting copper wire. MODEL Max. Cut Dia. A B C E I L YN-10AS ø YN-13AS ø For High-Density PCBs. PRECISION NIPPERS YN Unit :mm linclined 48 blades. For specific work such as the leads of surface-mounted components. NOTE: Use only for cutting copper wire. Flush Cutting Edge Flush Cutting Edge MODEL Max. Cut Dia. Length YN-21 ø1.3 mm 137 mm 21 ANTI STATIC 48 For High-Density PCBs. PRECISION NIPPERS YN lthin-nose tool with inclined 48 blades. Ideal for hard-to-reach areas. lcleanly cuts flat IC leads by aligning the cutting edge with the circuit board. NOTE: Use only for cutting copper wire. Unit :mm Standard Cutting Edge lmaximum cutting diameter of 1.6 and 2.0 mm. lyn-18 is stronger than YN -11.lThe YN -11 has a safety clip for holding wire scraps securely after cutting. NOTE: Use only for cutting copper wire Unit :mm Unit :mm Flush Cutting Edge MODEL Max. Cut Dia. Length YN-15 ø0.6 mm 130 mm Micro Nippers STANDARD CUTTING SURFACE YN-11/18 MODEL Max. Cut Dia. A B C E I L YN-11 ø YN-18 ø Heavy Duty Nippers STANDARD CUT YN-22 Standard Cutting Edge lstrong tool with a maximum cutting diameter of 2.0 mm. lthe 21 blade angle allows easy cutting with slight force. NOTE: Use only for cutting copper wire. MODEL Max. Cut Dia. Length YN-22 ø2.0 mm 141 mm SURFACE MOUNT / SMT DES HEATED TOOLS HAND TOOLS 101

102 HAND TOOLS PRECISION NIPPERS For integrated circuit pins. PRECISION NIPPERS YN langled at 48 for the cutting of integrated circuit pins. lheld in the reverse manner to standard nippers, the YN-14 cuts the flat IC leads that face away from the user. Unit :mm NOTE: Use only for cutting copper wire. Flush Cutting Edge MODEL Max. Cut Dia. Length YN-14 ø0.6 mm 130 mm For integrated circuit pins. PRECISION NIPPERS YN-16 Flush Cutting Edge Highly accurate with serrated long nose. PRECISION PLIERS YP-10 Unit :mm Tip Shape YP-10 lhighly accurate, like precision tweezers. lideal for hard-to-reach areas. Unit :mm 13 MODEL Inner Surface Length YP-10 w/ notches 160 mm Crimps and cuts. CRIMPING PLIERS YP Unit :mm 152 lcrimps and cuts the component wire in one operation. ladjustable from 6 to 18 mm. Cross Section In Use Finished SURFACE MOUNT / SMT langled at 48 for the cutting of integrated circuit pins. lheld in the reverse manner to standard nippers, the YN-16 cuts the flat IC leads that face away from the user. NOTE: Use only for cutting copper wire. MODEL Max. Cut Dia. Length YN-16 ø1.3 mm 135 mm PCB thickness 1.6mm NOTE: Use only for cutting copper wire. Cutting technique may result in slightly varying lengths. MODEL Max. Cut Dia. Length YP mm ø1.0 mm DES Cuts 1.5 mm from the surface. (Horizontal Type) 1.5 mm PLATFORM NIPPERS YN Flush Cutting Edge mm (Cuts leads 1.5mm above PCB) HEATED TOOLS HAND TOOLS lcuts wires 1.5 mm from the PCB surface. Before CUTTING Edge Unit :mm NOTE: Use only for cutting copper wire. After 1.5mm MODEL Max. Cut Dia. Length YN-104 ø1.3 mm 138 mm 102

103 HAND TOOLS WIRE STRIPPERS 2 in 1! Wire stripper and cutter. WIRE STRIPPER YS Unit :mm Stripper Stopper Cutter AWG mm Handles 6 Adjustment Dial 167 lmulti-use tool. It can be used as: Cutters, multi-diameter wire stripper, and pliers. llock for handy storing. lspring reduces muscle fatigue. ladjustable stopper for consistent lengths from 2 to 20 mm. lblade cutting depth can be simply adjusted by the dial to match the thickness of the insulation material. lextremely durable Nylon body strengthened by a metal plate and fiber glass. Cannot be used for Teflon, Neoprene, or asbestos wire. Damage to the core wire may result, or it may be torn, depending on the insulation material. MODEL Max. strip section Length YS mm mm Strip part Plier part Stripping Cutting Three functions: Cutters, Wire stripper, Pliers. PRECISION WIRE STRIPPER YS-2/3 Cutter part Lock YS-2 Adjustable cutting depth to match the thickness of the cable jacket. CABLE STRIPPER YS-100/101 lcuts cable jacket simply and accurately. ladjustable cutting depth to match the thickness of the cable jacket. lspare blades stored in the handle. lsafe design with covered blade. lthe blade moves automatically in the cutting direction. NOTE: Cannot be used with oval-shaped cables Push up the hook metal. Position A Cable Face Insert the cable. Let the cable push the blade to position A. Clamp the cable by the hook. HOW TO USE 140 HOW TO ADJUST THE BLADE Turn the dial to adjust the blade cutting depth to match cable jacket thickness. Excess blade edge damages the core wire (mm) Rotate the cable stripper in the direction of the arrow. When the cable jacket is cut, the stripper turns lightly. Pull outward in the direction of the arrow to complete the stripping. (The blade moves automatically in the cutting direction.) SURFACE MOUNT / SMT DES NOTE: Use only for cutting copper wire. MODEL Max. Strip Dia. Length YS-2 ø0.25, 0.3, 0.4, 0.5, 0.6, 0.8 mm 167 mm YS-3 ø0.8, 1.0, 1.3, 1.6, 2.0, 2.6 mm MODEL Max. Strip Dia. Length YS-100 ø4 16 mm 140 mm YS-101 ø8 28 mm REPLACEMENT PARTS / OPTIONS YS-100 /101 Blade YS-100HA HEATED TOOLS HAND TOOLS 103