HAKKO Soldering Iron Lineup

Transcription

1 HAKKO Lineup FX-888D FX-889 FX-80 FX-88 FX-0 FX-95 FX-950 Types All-Round Heavy Duty IH High Permance Power consumption 70 W 5 W 00 W 58 W 5 W (85 W) 75 W 75 W Specifications Power consumption of Handpiece 5 W 5 W x port 0 W 50 W 70 W 70 W Temperature Range 50 to 480 C 50 to 480 C 50 to 500 C 00 to 500 C 50 C/400 C/450 C 00 to 450 C 00 to 450 C Soldering Tip T8 series T8 series T series T0 series T series T series T series ppicae Stana Lead Free Suggestible ESD Safe RoHS Suggestible Micro connectable N Micro Soldering Iron connectable N connectable ccessoies N Heavy Duty Soldering Iron connectable Self Feeder connectable SMD Hot Tweezers connectable Desoldering Iron connectable Hot Air Handpiece connectable Auto Shutoff Function: When a set time passed, the function stops to supply power to the heating element. Auto Sleep Function: When a set time passed, the tip temperature decreases to a set lower temperature. Lock Function: Lockable by password, control card or lock key. Option nction Password Password Password Control card Password Control card Lock key Lower Temperature Error Alert: When the temperature drops below a set limit, an error is displayed and the buzzer sounds. Offset Temperature Function: Temperature offsettable by analog, digital or adjustment mode. Adjustment mode Adjustment mode Digital Digital Digital Manual Preset Temperature Function: The function allows to input several frequently-used temperatures and recall with one push of a button. 8

2 FM-0 FM-0 FX-00 FX-0 DASH PRESTO FX-90 RED MG High Permance Ceramic Heater Battery-Powered Nichrome Heater 40 W 4 W (max.) 50 W 47 W 5 to W 0 W/0 W W/5 W 0 W/0 W 40 W/0 W 0 W/40 W 0 W/80 W 0 W/50 W 70 W port 70 W port 00 to 450 C 00 to 450 C 00 to 500 C 40 to 540 C T series T series T8 series T9 series T4 series 980-T series T series BB series 58-T T- 587-T-8 59-T- Control card Password Lock key Lock key Digital Digital Manual Manual 9

3 Heavy Duty Soldering Station Heavy Duty Soldering Station Digital Tip not included Heavy duty N Soldering (Option) Super power 00 W Best suited soldering P.W.B. with high heat capacity and high heat dissipation property Optional Tips FX-800 ø.5 T-BC Shape-BC T-BC Shape-BC T-BC4 Shape-4BC ø ø T-BC5 Shape-5BC T-BC Shape-BC T-D4 Shape-.4D ø.4 ø5 ø..7 T-D Shape-.D T-D5 Shape-5D T-D Shape-D. ø5 ø.5.5 T- T

4 Features Make the impossible possible with Super Power of 00 W Heater Check out the powerful permance of FX-80 easily melting a bar solder. QR code Compact and lightweight (50 g) heavy duty 00 W iron The same weight as the iron part of FX-88, 50 W soldering station, operator s comt and better workability. Large LED display enables easy viewing and operation. Handles on unit body Handles on unit body make it easy to carry. Preset mode Up to settings can be preset and easily called up by Up/ Down buttons. Password function Settings can be locked from unnecessary changes by password function. Selectable alphabets password Connectable with N soldering iron To improve solder wettability and spreadability N Tip not included Packing List FX-80 FX-800 Please see the optional tips on P.4. For further details, see the N system (P.8 & P.9). Station, Handpiece (FX-800), Heat resistant pad, Power cord, Connecting cable, Iron holder (with cleaning wire), Instruction manual Handpiece, Instruction manual Specifications FX-80 Power consumption 00 W Temperature range 50 to 500ºC Temperature stability ±5ºC at idle temperature Station Output voltage AC 9 V Dimensions 45 (W) 7 (H) (D) mm Weight.9 kg Power consumption 0 W (9 V) < Ω < mv Composite heater. m 8 mm (with 4BC tip) 50 g (with 4BC tip) FX-800 Power consumption 0 W (9 V) Temperature range 50 to 500ºC < Ω < mv Composite heater. m 5 mm (with 4BC tip) 5 g (with 4BC tip and nozzle assembly A) 5

5 All-Round Soldering Station All-Round Soldering Station Digital Tip included Soldering N Soldering (Option) Solder Feed Soldering (Option) Hot Tweezer Rework (Option) Features Adjustment mode, Preset mode, and Password function Separable tip/heater design provides superior cost permance. L type (Large type) soldering iron FX-8805 is added to the lineup. -Port All-Round Soldering Station Digital Tip included * piece of FX-880 is included as standard. Soldering N Soldering (Option) Solder Feed Soldering (Option) Hot Tweezer Rework (Option) All the user-friendly functions are succeeded from FX-888D. Two applications can be active at the same time. Applicable to all the options, N soldering iron, Soldering gun, SMD Hot Tweezers, and L type (Large type) soldering iron.

6 Common features Strict temperature management Digital display FX-888D s and FX-889 s digital display makes it easy to check the set temperature at a glance. Password function Settings can be locked using a password to prevent them from being changed unexpectedly. Preset mode Simply select the desired temperature from a selection of preset temperatures registered in advance. (Up to 5 preset temperatures can be registered.) The display returns to Preset when the UP button is pressed a sixth time. Adjustment mode With adjustment mode, what used to be a troublesome procedure is now as simple as entering the measured tip temperature in FX-888D and FX-889. FX-888D and FX-889 deliver excellent thermal recovery by using T8 and T9 series tips their terrific heat conductivity. 400 Measuring the tip temperature with a tip thermometer (FG-0) 50 T8 900M T9 900L 58. sec. 7.8 sec. 4.4 sec. 9. sec. Packing List FX-888D Station, Handpiece (FX-880), Iron holder, Instruction manual Reduced by 0% Reduced by 0% FX-889 Specifications Station, Handpiece (FX-880), Power cord, Dual Iron Holder, Color band (qty ), Instruction Manual T. Test criteria Thermocouples are mounted on the tip and Measurement method the soldered portion on the board, and the time until the soldered portion reaches 50 C is measured 5 points. Board Paper phenol copper board Component used Terminal Tip shape Shape-.4D Temperature setting 50 C Solder Lead-free solder (Sn/Ag/Cu), diameter: mm FX-888D FX-889 Power consumption 70 W 5 W Temperature range 50 to 480 C 50 to 480 C Temperature stability Station ± C at idle temperature (when set to 00 to 480 C) Output voltage AC V AC V Dimensions 0 (W) 0 (H) 0 (D) mm 57 (W) (H) 49 (D) mm Weight. kg*. kg Power consumption 5 W ( V) 5 W ( V) < Ω < Ω < mv < mv Ceramic heater Ceramic heater Standard tip Shape-B (No.T8-B) Shape-B (No.T8-B). m. m mm (with B tip) mm (with B tip) 4 g (with B tip) 5 g (with B tip)

7 All-Round Soldering Station and Accessories Features of FX-889 User-Friendly Design Space-saving design The reduced foot print is smaller than of FX-888D and its iron holder. Efficient setup is available even on smaller workbench. FX-888D Station Iron holder FX-889 Easy-to-carry handle Power-saving design Independent switches cut the power each iron when not in use. Power-saving design minimizes standby electricity. Superior operability Four buttons were symmetrically placed at the both sides on the front panel. The two buttons on each side allow simple and intuitive operation. A color band can be attached to the handle, and this makes it possible to see at a glance which side it is connected to. ( pieces of color band are included as the standard accessories.) Power switch (Iron A) Color band Power switch (Iron B) Rich functions of iron holder Convenient pockets to stock soldering tips Three different ways tip cleaning with provided cleaning tools Simple and easy cleaning of iron holder inside by removing holder base Rubber plate * To wipe excess solder from a tip Cleaning wire Cleaning sponge Storage pocket Base 8

8 M type Tip included Specifications FX-880 Power consumption 5 W ( V) Temperature range 50 to 480 C < Ω < mv Ceramic heater Standard tip Shape-B (No.T8-B). m mm (with B tip) 4 g (with B tip) N Tip included Soldering Gun Tip included SMD Hot Tweezers Tip included L type Tip included FX-880 Power consumption 5 W ( V) Temperature range 50 to 480 C Standard tip * < Ω < mv Ceramic heater Shape-B (No.T8-B). m 90 mm (with B tip) * 59 g (with B tip and nozzle assembly A) * Use this N soldering iron below 450 C. * and tube FX-880 Power consumption 5 W ( V) Temperature range 50 to 480 C Standard tip Standard guide nozzle Usable solder diameter Dimensions < Ω < mv Ceramic heater Shape-C pre-tinned surface (No.T8-CF) ø mm 0., 0.8,,.,. mm. m 0 (W) 80 (H) (D) mm 07 g FX-8804 Power consumption 5 W ( V) Temperature range 00 to 400 C Standard tip * * < Ω < mv Ceramic heater Shape-L (No. A78) pcs/set. m 8 mm 9 g * The recommended (process) temperature is from 00 C to 400 C while setting temperature range of FX-888D is from 50 C to 480 C. * FX-8805 Power consumption 5 W ( V) Temperature range 50 to 480 C Standard tip < Ω < mv Ceramic heater Shape-B (No.T9-B). m mm (with B tip) 5 g (with B tip ) 9

9 All-Round Soldering Station and Accessories Packing List FX-880 FX-880 FX-880 FX-8804 FX-8805 Handpiece, Instruction Manual Handpiece, Shield plate, Instruction manual Handpiece, Instruction manual Handpiece, Caution label, Heat resistant pad, Instruction manual Handpiece, Instruction Manual NOTE: The soldering iron cannot be used as a standalone device. Option FX-880 Part No. Name pecifications C47 Iron holder (with cleaning sponge) FX-8804 Part No. Name pecifications FH800-04BY Iron holder (with cleaning sponge) Blue & yellow FX-880 & FX-8805 Part No. Name pecifications B5 Tip enclosure With nut, required when converting from FX-880 to FX-8805 B70 Nut and tip enclosure Required when converting from FX-8805 to FX-880 Replacement Tips FX-880 and FX-880 Applicable FX-880 Applicable FX-880 T8-B Shape-B T8-SB Shape-SB T8-BR0 Shape-0.BR T8-BL Shape-BL T8-C05 Shape-C R 4 ø Applicable FX-880 Applicable FX-880 (Only C) Applicable FX-880 Applicable FX-880 T8-C08 Shape-0.8C T8-C Shape-C T8-CF* T8-CF5* Shape-.5C T8-C Shape-C T8-CF* T8-CSF5* Shape-.5CS ø ø.5 ø ø Applicable FX-880 Applicable FX-880 Applicable FX-880 Applicable FX-880 Applicable FX-880 T8-C Shape-C T8-C4 Shape-4C T8-C5 Shape-5C T8-K Shape-K T8-D08 Shape-0.8D T8-CF* T8-CF4* ø4 ø5 ø Applicable FX-880 Applicable FX-880 Applicable FX-880 Applicable FX-880 T8-D Shape-.D T8-D Shape-.D T8-D4 Shape-.4D T8-D Shape-.D T8-DL Shape-.DL ø. ø. ø.4. ø Applicable FX-880 T8-DL Shape-DL T8-DL Shape-.DL T8-S Shape-S T8-S4 Shape-S4 T8-S Shape-S ø.5..5 ø5. 8 R0.5. ø. 0.5 Applicable FX-880 T8-S9 Shape-S9 Applicable FX-880 T8-I Shape-I ø * These tips are tinned on the soldering surface only. 0

10 Replacement Tips and Nozzles FX-880 Please see the replacement tips on P.40 Replacement Tips FX-8804 or hip oponent Part No. Name Size of A (B) Tip Shape A577 Tip/CHIP L mm A79 Tip/CHIP L mm A A78 Tip/CHIP L mm A B A88 Tip/CHIP C.5 () mm A89 Tip/CHIP I 5 mm A A57 Tip/CHIP.C. mm A or oponent Part No. Name Size of A Tip Shape A90 Tip/SOP 4L 4 mm A9 Tip/SOP L mm A80 Tip/SOP 8L 8 mm A8 Tip/SOP L mm A8 Tip/SOP L mm A A9 Tip/SOP 5L 5 mm A8 Tip/SOP 8L 8 mm A84 Tip/SOP 0L 0 mm A85 Tip/SOP 5L 5 mm Replacement Tips FX-8805 T9-B Shape-B T9-B Shape-B T9-C Shape-C T9-C4 Shape-4C T9-C5 Shape-.5C R R ø T9-D4 Shape-.4D T9-D Shape-.D T9-D5 Shape-5D T9-D5 Shape-.5D T9-I Shape-I.5 ø.5 ø ø5 8 ø.5 8

11 High Permance Soldering Station High Permance Soldering Station Digital Tip not included Soldering N Micro Soldering Soldering (Option) Compact high-power thermally-controlled soldering iron Inms you of errors by a warning buzzer or display High Permance Soldering Station Analog Tip not included Soldering N Soldering (Option) Analog type high-power thermallycontrolled soldering iron Lock key can lock the temperature setting. Inms you of various errors by a lamp

12 FX-95 and FX-950 Conventional model (HAKKO 9 and HAKKO 9 Features Thermal recovery graph (comparison of HAKKO products) Temperature ( ) FX-95 and FX-950 Conventional model (HAKKO 9 and HAKKO 97) Composite tip Tip Specifications Sensor The composite tip with an integrated heating element and sensor offers superior thermal responsivity and thermal recovery. Time (s 0 Test criteria Time (sec.) A thermocouple is mounted on the tip and the Measurement method tip temperature is measured when soldering Sensor ø. mm 5 mm solder to paper phenol copper board once every seconds. Board Tip Paper phenol copper board. Temperature setting 50 C Solder Lead-free solder (Sn/Ag/Cu), diameter:. mm 5 mm Connectable with micro soldering iron For micro soldering applications under a microscope Micro Tip not included Please see the optional tips on P.. N Soldering is available with optional parts (P.9 & P.4). Connectable with N soldering iron To improve solder wettability and spreadability FX-95 FX-950 Power consumption 75 W Temperature range 00 to 450 C Temperature stability Station Output voltage Dimensions Weight ±5 C at idle temperature AC 4 V FX-95: 80 (W) 0 (H) (D) mm FX-950: 80 (W) 8 (H) 8 (D) mm. kg Power consumption 70 W (4 V) < Ω < mv Composite heater. m 88 mm (with.4d tip) 0 g (with.4d tip) FM-0 FM-0 Power consumption 48 W (4 V) 70 W (4 V) Temperature range 00 to 450ºC < Ω < mv Composite heater. m. m Total length Weight 0 mm* (with D tip) 4 g* (with D tip) * and tube *** Use FM-0 below 400 C. Packing List 05 mm** (with.4d tip) 45 g** (with.4d tip and nozzle assembly C) N Tip not included Please see the optional tips on P.40. FX-95 FX-950 FM-0 (Conversion kit) FM-0 (Conversion kit) Station, Handpiece (FM-08), Control card, Power cord, Connecting cable, Heat resistant pad, Iron holder, Instruction manual Station, Handpiece (FM-08), Lock key, Heat resistant pad, Iron holder, Instruction manual Handpiece, Heat resistant pad, Iron holder, Connecting cable, Instruction manual Handpiece, Sleeve cover, Sleeve assembly (yellow), Heat resistant pad, Iron holder, Connecting cable, Instruction manual For further details, see the N system (P.8 & P.9).

13 High Permance Soldering Station Optional Tips FM-08 Standard type ø5.5 9 T-B Shape-B T-B Shape-B T-B Shape-0.7B T-B4 Shape-0.4B T-BL Shape-BL B 7.5 R R0.7 5 R0.4 5 T-BC Shape-BC T-BCF* T-BC Shape-BC T-BCF* T-BC Shape-BC T-BCF* T-BCM Shape-BC Bevel with indent T-BCM Shape-BC Bevel with indent BC. ø.5. ø ø T-C08 Shape-0.8C T-C Shape-C T-C4 Shape-4C T-CF4* C ø ø T-D08 Shape-0.8D T-D Shape-.D T-D Shape-.D T-D4 Shape-.4D T-D4 Shape-4D ø. ø. ø.4 ø4 D T-D5 Shape-5.D T-DL08 Shape-0.8DL T-DL Shape-.DL T-DL Shape-.DL T-DL5 Shape-5.DL ø5. ø.. ø T-I Shape-I T-IL Shape-IL T-ILS Shape-ILS I.7 R0.5.5 T-J0 Shape-0.J T-JL0 Shape-0.JL T-JS0 Shape-0.JS J T-K Shape-K T-KF Shape-KF T-KL Shape-KL T-KR Shape-KR T-KU Shape-KU K ø4.7 ø4.7 ø4.7 ø * These tips are tinned on the soldering surface only. Concave type T- T-. ø

14 SMD type Quad T-0 Quad. x 8.5 T-0 Quad. x. T-0 Quad.8 x.8 T-04 Quad.9 x.9 T-05 Quad.4 x T-0 Quad.5 x.5 T-07 Quad 5.5 x 5.5 T-08 Quad 5.8 x 5.8 T-09 Quad 8.4 x T-0 Tunnel 5. x 4. T-0 Tunnel 5. x.4 T-0 Tunnel x 8. T-04 Tunnel x 5.8 T-05 Tunnel x. Tunnel T-0 Tunnel.9 x.4 T-07 Tunnel 7.9 x 8.8 T-08 Tunnel x. T-09 Tunnel.4 x T- Tunnel x T-40 Spatula.4 T-40 Spatula 5.7 T-40 Spatula. T-404 Spatula 5 T-405 Spatula Spatula T-40 Spatula Long life type T-BZ Shape-B (Z) T-BZ Shape-B (Z) T-BCZ Shape-BC (Z) T-BCFZ* T-BCZ Shape-BC (Z) T-BCFZ* T-BCZ Shape-BC (Z) T-BCFZ* ø ø 8 R... T-C4Z Shape-4C (Z) T-CF4Z* T-DZ Shape-.D (Z) T-DZ Shape-.D (Z) T-D4Z Shape-.4D (Z) T-D4Z Shape-4D (Z) 4. ø4. ø. 4 ø. 5 ø.4 ø4 4 T-KFZ Shape-KF (Z) T-KRZ Shape-KR (Z) ø4.7 ø4.7.4 * These tips are tinned on the soldering surface only. Heavy duty type φ.7 ø.7 φ5.5 ø5.5 T-WB Shape-WB T-WD08 Shape-0.8WD T-WD Shape-.WD T-WD Shape-.WD T-WD5 Shape-5.WD T-WI Shape-WI 9 R.8 ø. ø..5 ø

15 IH Soldering Station Good Design Award has been a sole comprehensive design evaluation and commendation system in Japan since 957. G Mark, the symbol of the award has been recognized widely as a mark representing good design. IH Soldering Station Digital Tip not included Soldering Provides the heat to the tip effectively by an Induction heater Unique Power assist feature that assists the thermal recovery permance of the soldering iron tip No calibration is required Wide variety of tips available Meets or exceeds IPC J-STD-00 and ANSI ESD S0.0. Optional Tips FX-0 T-0BC Shape-BC T-0BC T-0BC ø4.8 A T-0BC8 Shape-.8BC T-0BC8 T-0BC8 T-0BL Shape-BL T-0BL T-0BL "0" 450 C (A: 7.5) "0" 400 C (A: 8.5) "0" 50 C (A: 8.5) T-0D08 Shape-0.8D T-0D08 T-0D08 T-0D Shape-.D T-0D T-0D. ø ø ø. T-0D4 Shape-.4D T-0D4 T-0D4 ø.4 T-0JL0 Shape-0.RLB T-0JL0 T-0JL T-0D5 Shape-5.D T-0D5 T-0D5 0.8 ø T-0JS0 Shape-0.RSSB T-0JS0 T-0JS T-0I Shape-I T-0I T-0I T-0KU Shape-KU T-0KU T-0KU. ø4.8 T-0IL Shape-IL T-0IL T-0IL T-0SBL Shape-SBL T-0SBL T-0SBL T-0J0 Shape-0.RSB T-0J0 T-0J0 0 T-0WD08 Shape-0.8WD T-0WD08 T-0WD08.7 Optional Tips FX-0 T5-0D0 Shape-0.D T5-0D0 0. Φ0. 5. A T5-0D Shape-D T5-0D 0. Φ 5. T5-0I Shape-I T5-0I R T5-0J Shape-J T5-0J 40 R0. "0" 400 C (A: 4) "0" 50 C (A: 4).9. T5-0KU Shape-KU T5-0KU.4 Φ.

16 Features induction heater eceent thera efficiency Ideal the most challenging soldering jobs. FX-0 features IH (induction heater) that continuously powers the soldering iron and maintains the set temperature by automatically detecting even minute drops in temperature, plus HAKKO s proprietary Power Assist function. FX-0 achieves powerful thermal recovery even with fine-shaped tips. It provides excellent thermal responsiveness that conventional IH and sensor feedback systems cannot offer. Boost function To increase tip temperature by 5 to C (depends on tip shape) better working efficiency. nteractie ethod by dispay ith buttons PROFILE Station ID, user name and solder type can be registered. TIP LOAD TIP TIME The soldering count is displayed. The cumulative running time on the iron tip is displayed. TIP TYPE and NORMAL MODE/BOOST MODE Visible tip type (0/0/0) and normal mode (N)/boost mode (B) on display. Connectable with micro soldering iron For micro soldering applications under a microscope Specifications Micro Tip not included New FX-0 Power consumption 8 W (85 W) Temperature range T-0 Series: 450 C, T-0 Series: 400 C T-0 Series: 50 C Temperature stability ±. C Station Output power Output frequency Dimensions Weight 50 W.5 MHz 7 (W) 50 (H) 7 (D) mm kg < Ω < mv IH (Induction heating). m 90 mm with T-0D4 or T-0D4 tip 9 mm with T-0D4 tip g (with T-0D4 tip) Packing List FX-0 FX-0 (Conversion kit) Station, Handpiece (FX-0), Heat resistant pad, Power cord, Sleeve (green), Sleeve (gray), Cleaning wire, Iron holder, Instruction manual Handpiece, Sleeve (green), Heat resistant pad, Iron holder, Instruction manual FX-0 Temperature range T5-0 Series: 400 C, T5-0 Series: 50 C < Ω < mv IH (Induction heating). m mm (with T5-0D tip) g (with T5-0D tip) 7

17 Heavy Duty Soldering Station Heavy Duty Digital Tip not included Heavy duty N Soldering (Option) High powered 50 W soldering iron Best suited soldering of power-supply boards, heat sinks, and shield cases Applicable also to the soldering of multilayer boards with micro components Optional Tips FX-80 ø7. 90 T0-B Shape-B T0-BC Shape-BC T0-BCF* T0-BC Shape-BC T0-BCF* T0-BC4 Shape-4BC T0-BCF4* T0-BCM Shape-BC Bevel with indent R. ø ø4..4 ø T0-BCM Shape-BC Bevel with indent T0-BL Shape-BL T0-BL Shape-BL T0-BL Shape-BL T0-C5 Shape-5C ø R 5 R 5 5. T0-C Shape-C T0-D Shape-.D T0-D4 Shape-.4D T0-D Shape-.D T0-D Shape-D ø ø. ø.4. ø..5 T0-J0 Shape-0.J T0-K Shape-K T0-KU Shape-KU T0- T ø * These tips are tinned on the soldering surface only. 8

18 Features Graph of a comparison of the permance of FX-88 and a conventional station Temperature ( C) FX-88 (50W) 4. sec. FX-95 (70W). sec. Soldering tip Point Point Point Point 4 Point 5 Test criteria Thermocouples are mounted on the tip and Measurement method the soldered portion on the board, and the time until the soldered portion reaches 50 C is measured 5 points. Board Bakelite board Component used Terminal Tip shape Shape-.D Temperature setting 40 C Solder Lead-free solder (Sn/Ag/Cu), diameter: mm 0 Time (sec.) Temperature preset mode The temperature preset mode allows you to input three frequently-used temperatures in advance and recall them with one push of a button. Preset example P ( ) P ( ) P ( ) Push the button once. Push the button once. Push the button once. One push of a button can quickly recall each setting. Connectable with N soldering iron To improve solder wettability and spreadability N Tip not included Packing List FX-88 FX-80 Please see the optional tips on P.4. For further details, see the N system (P.8 & P.9). Station, Handpiece (FX-80), Control card, Power cord, Heat resistant pad, Connecting cable, Iron holder, Instruction manual Handpiece, Instruction manual Specifications FX-88 Power consumption 58 W Temperature range 00 to 500 C Temperature stability ±5 C at idle temperature Station Output voltage AC 7 V Dimensions (W) (H) 05 (D) mm Weight. kg Power consumption 50 W (7 V) < Ω < mv Ceramic heater. m 5 mm (with.4d tip) g (with.4d tip) FX-80 Power consumption 50 W (7 V) Temperature range 00 to 500 C < Ω < mv Ceramic heater. m 95 mm (with.4d tip) 4 g (with.4d tip and nozzle assembly D) and tube 9

19 High Permance Rework Station and Accessories -Port High Permance Rework Station Tip not included Digital Soldering Micro Soldering Heavy duty Soldering N (Option) Hot Tweezer Desoldering Rework (Option) (Option) handpieces can be connected at the same time. -Port High Permance Rework Station Digital Tip not included Nozzle not included Soldering Micro Soldering Heavy duty Soldering N (Option) Desoldering Hot Tweezer Rework (Option) Hot Air Rework -port rework station that enables soldering, desoldering, and SMD rework all with a single unit Graphic LCD enables easy viewing and operation. Handpiece Combination Examples FM-0 FM-0 Control button (,, and ) Flow control knob Connection FM-04 suction hose Air output FM-09 D Handpiece Channel D Channel S connector connector FM-07 FM-0 * FM-0 * FM-04 * FM-0 * FM-0 * When FM-0 or FM-0 is connected to the channel D connector, both channel connectors can t be used at the same time. * When two FM-04s are connected to the channel connectors, each FM-04 must be connected to the desolder control box. * For FM-0, each handpiece needs an N generator (FX-780), flowmeter (FX-79), compressor, regulator, etc. For further details, see N system (P.8 & P.9). S Handpiece Receptacle Receptacle Receptacle FM-07 FM-04 * * FM-09 FM-0 FM-0 FM-0 FM-00 FM-0 * * FM-0 * FM-04 can be connected to receptacle and. However, only one FM-04 can be used with the station. * For FM-0 and FM-0, each handpiece needs an N generator (FX-780), flowmeter (FX-79), compressor, regulator, etc. For further details, see N system (P.8 & P.9). NOTE: FM-04 and FM-09 can t be used at the same time. 0

20 Accessories Tip not included Micro Tip not included N Soldering is available with optional parts (P.9 & P.4). N Tip not included SMD Hot Tweezers Tip not included Hot-Air Pencil Nozzle not included Mini SMD Hot Tweezers Tip included Heavy Duty Tip not included N Heavy Duty Tip not included Desoldering Tool Nozzle not included

21 High Permance Rework Station and Accessories Specifications Power consumption Temperature range Temperature stability Station Output voltage Dimensions Weight FM-0 40 W FM-0/07: 00 to 450 C FM-0/0: 00 to 400 C FM-0: 00 to 450 C FM-04: 50 to 450 C ±5 C at idle temperature AC 4 V 0 (W) 0 (H) 90 (D) mm.7 kg (FM-07) Power consumption 70 W (4 V) < Ω < mv Composite heater. m 88 mm (with.4d tip) 0 g (with.4d tip) Power consumption Temperature range Temperature stability Station Output voltage Vacuum generator Vacuum pressure Suction flow Air flow Dimensions FM-0 4 W (450 W, max.) FM-0/07: 00 to 450 C FM-0/0: 00 to 400 C FM-04: 50 to 450 C FM-09: 0 to 550 C FM-00: 00 to 500 C FM-0: 00 to 500 C FM-0: 00 to 450 C ±5 C at idle temperature AC 4 V Vacuum pump, cylinder type 80 kpa (00 mmhg, max.) 4 L /min. L /min. (max.) (W) (H) 45 (D) mm. kg (FM-07) Power consumption 70 W (4 V) < Ω < mv Composite heater. m 88 mm (with.4d tip) 0 g (with.4d tip) Desoldering Tool (FM-04) Power consumption 70 W (4 V) Nozzle to ground resistance < Ω Nozzle to ground potential < mv Composite heater. m 80 mm (with ø mm nozzle) * 5 g (with ø mm nozzle) Hot Air Handpiece (FM-09) Power consumption 40 W (4 V) Nozzle to ground resistance < Ω Nozzle to ground potential < mv Composite heater. m ** mm (with ø4 mm nozzle) ** 50 g (with ø4 mm nozzle) * and hose ** and tube FM-0 Power consumption 40 W (4 V) < Ω < mv Composite heater. m 48 mm (with SOP 5L tip) 4 g (with SOP 5L tip) FM-0 Power consumption 40 W (4 V) < Ω < mv Composite heater Standard tip Shape-I: pcs/set (No.T9-I). m mm (with I tip) 7 g (with I tip) FM-04 Desoldering Tool Power consumption 70 W (4 V) Nozzle to ground resistance < Ω Nozzle to ground potential < mv Composite heater. m * 80 mm (with ø mm nozzle) * 5 g (with ø mm nozzle) Desolder Control Box Power consumption W (4 V) Vacuum generator Ejector type Vacuum pressure 9 kpa (700 mmhg, max.) Suction flow 0 L /min. Nozzle to ground potential < mv Applied air pressure 490 kpa (5 kgf/cm ) While in use (trigger or button is pressed) Compressed air consumption 4 L /min. Outer dimensions 9 (W) x 45 (H) x (D) mm. kg * and hose FM-0 Power consumption 70 W (4 V) < Ω < mv Composite heater. m * 05 mm (with.4d tip) * 45 g (with.4d tip and nozzle assembly C) * Use this N soldering iron below 400 C. * and tube FM-07 Power consumption 70 W (4 V) < Ω < mv Composite heater. m 88 mm (with.4d tip) 0 g (with.4d tip)

22 Specifications FM-00 Power consumption 40 W (4 V) < Ω < mv Composite heater. m 4 mm (with.4d tip) 4 g (with.4d tip) FM-0 Power consumption 40 W (4 V) < Ω < mv Composite heater. m mm (with.4d tip) 47 g (with.4d tip and nozzle assembly E) and tube FM-0 Power consumption 48 W (4 V) < Ω < mv Composite heater. m 0 mm (with D tip) 4 g (with D tip) Packing List FM-0 FM-0 FM-0 (Conversion kit) FM-0 (Conversion kit) Station, Handpiece (FM-07), Sleeve assembly, Connecting cable, Power cord, Control card, Iron holder, Tip tray, Heat resistant pad, Instruction manual Station, Power cord, Tip tray, Desoldering tool (FM-04), Handle ( gun configuration FM-04), Iron holder ( FM-04), Ceramic paper filter ( pcs; FM-04), Nozzle remover ( FM-04), Cleaning drill heating element ( FM-04), Connecting cable ( FM-04), Handpiece (FM-07), Iron holder ( FM-07), Heat resistant pad ( FM-07), Connecting cable ( FM-07), Hot air handpiece (FM-09), Iron holder ( FM-09), Heat resistant pad ( FM-09), Connecting cable ( FM-09), Instruction manual Parallel remover, Heat resistant pad, Iron holder, Connecting cable, Instruction manual Mini parallel remover, Soldering tip (T9-I), Heat resistant pad, Iron holder, Component bed, Connecting cable, Instruction manual FM-04 (Conversion kit, with DCB) FM-0 (Conversion kit) FM-07 (Conversion kit) FM-09 (Conversion kit) FM-00 (Conversion kit) FM-0 (Conversion kit) FM-0 (Conversion kit) Desoldering tool, Handle ( gun configuration), Desoldering control box, Filter pipe assembly, Iron holder, Cleaning drill heating element, Nozzle remover, Ceramic paper filter ( pcs), Connecting cable, Instruction manual Handpiece, Sleeve cover, Sleeve assembly (yellow), Heat resistant pad, Iron holder, Connecting cable, Instruction manual Handpiece, Sleeve assembly (yellow), Heat resistant pad, Iron holder, Connecting cable Handpiece (hot air), Handpiece holder, Heat resistant pad, Connecting cable, Instruction manual Handpiece (soldering), Heat resistant pad, Iron holder, Connecting cable, Instruction manual Handpiece (soldering), Heat resistance pad, Iron holder, Connecting cable, Instruction manual Handpiece, Heat resistant pad, Iron holder, Connecting cable, Instruction manual FM-09 Features Securely and easily remove (mm) chips. FM-00 Features Graph of a comparison of the permance of FM-07 (70 W) and FM-00 (40 W) Temperature( C) 400 FM-07 (70 W) sec FM-00 (40 W) 7. sec. FM-00 (.4D) FM-07 (.4D) Point Point Point Point 4 Point 5 50 FM-0 Size.4 Approx.0 Approx.ø. Approx Time (sec.) Test criteria Test method Solder at 5 points and measure the time until the temperature of the workpiece reaches 50 C. Board Bakelite board Component used Screw Tip shape Shape-.4D Temperature setting 50 C Solder Lead-free solder (Sn/Ag/Cu), diameter: mm

23 High Permance Rework Station and Accessories Optional Tips FM-07 Standard type ø5.5 9 T-B Shape-B T-B Shape-B T-B Shape-0.7B T-B4 Shape-0.4B T-BL Shape-BL B 7.5 R R0.7 5 R0.4 5 T-BC Shape-BC T-BCF* T-BC Shape-BC T-BCF* T-BC Shape-BC T-BCF* T-BCM Shape-BC Bevel with indent T-BCM Shape-BC Bevel with indent BC. ø.5. ø ø T-C08 Shape-0.8C T-C Shape-C T-C4 Shape-4C T-CF4* C ø ø T-D08 Shape-0.8D T-D Shape-.D T-D Shape-.D T-D4 Shape-.4D T-D4 Shape-4D ø. ø. ø.4 ø4 D T-D5 Shape-5.D T-DL08 Shape-0.8DL T-DL Shape-.DL T-DL Shape-.DL T-DL5 Shape-5.DL ø5. ø.. ø T-I Shape-I T-IL Shape-IL T-ILS Shape-ILS I.7 R0.5.5 T-J0 Shape-0.J T-JL0 Shape-0.JL T-JS0 Shape-0.JS J T-K Shape-K T-KF Shape-KF T-KL Shape-KL T-KR Shape-KR T-KU Shape-KU K ø4.7 ø4.7 ø4.7 ø * These tips are tinned on the soldering surface only. Concave type T- T-. ø

24 SMD type Quad T-0 Quad. x 8.5 T-0 Quad. x. T-0 Quad.8 x.8 T-04 Quad.9 x.9 T-05 Quad.4 x T-0 Quad.5 x.5 T-07 Quad 5.5 x 5.5 T-08 Quad 5.8 x 5.8 T-09 Quad 8.4 x T-0 Tunnel 5. x 4. T-0 Tunnel 5. x.4 T-0 Tunnel x 8. T-04 Tunnel x 5.8 T-05 Tunnel x. Tunnel T-0 Tunnel.9 x.4 T-07 Tunnel 7.9 x 8.8 T-08 Tunnel x. T-09 Tunnel.4 x T- Tunnel x T-40 Spatula.4 T-40 Spatula 5.7 T-40 Spatula. T-404 Spatula 5 T-405 Spatula Spatula T-40 Spatula Long life type T-BZ Shape-B (Z) T-BZ Shape-B (Z) T-BCZ Shape-BC (Z) T-BCFZ* T-BCZ Shape-BC (Z) T-BCFZ* T-BCZ Shape-BC (Z) T-BCFZ* ø ø 8 R... T-C4Z Shape-4C (Z) T-CF4Z* T-DZ Shape-.D (Z) T-DZ Shape-.D (Z) T-D4Z Shape-.4D (Z) T-D4Z Shape-4D (Z) 4. ø4. ø. 4 ø. 5 ø.4 ø4 4 T-KFZ Shape-KF (Z) T-KRZ Shape-KR (Z) ø4.7 ø4.7.4 * These tips are tinned on the soldering surface only. Heavy duty type φ.7 ø.7 φ5.5 ø5.5 T-WB Shape-WB T-WD08 Shape-0.8WD T-WD Shape-.WD T-WD Shape-.WD T-WD5 Shape-5.WD T-WI Shape-WI 9 R.8 ø. ø..5 ø

25 High Permance Rework Station and Accessories Optional Tips FM-0 T0-D0 Shape-0.D T0-D Shape-D T0-I Shape-I T0-J Shape-J T0-KU Shape-KU T0-KN Shape-KN Optional Tips FM-0 CHIP T8-0 Chip I T8-0 Chip C T8-0 Chip L T8-04 Chip L T8- Chip L SOP T8-05 SOP L T8-0 SOP 8L T8-07 SOP L T8-08 SOP L T8-09 SOP L T8- SOP 0L T8- SOP 5L T8- SOP 8L Replacement Tips FM-0 CHIP T9-I Chip I T9-L Chip L T9-L Chip L Optional Tips FM-00 T-BL Shape-BL T-BL Shape-BL T-BC Shape-BC T-C Shape-C T-C5 Shape-5C T-C Shape-C ø ø5 ø 5 R T-D08 Shape-0.8D T-D Shape-.D T-D Shape-.D T-D4 Shape-.4D T-D Shape-.D T-D45 Shape-4.5D ø. ø. ø.4. ø T-D5 Shape-5.D T-J0 Shape-0.J T-JD08 Shape-0.8JD T-K Shape-K ø5. 4. ø5 ø0. ø ø.8 ø R * set: pcs * set: pcs

26 Optional Nozzles FM-04 N-0 Nozzle ø0. N-08 Nozzle N- Nozzle ø N- Nozzle ø. N- Nozzle ø. ø.9 ø0. ø ø. ø ø. ø. ø N-0 Nozzle ø N- Nozzle ø. N-L Nozzle ø long.4 ø.8 ø. ø. ø Optional Nozzles FM-09 øb øa øa øb N4-0 Nozzle ø.5 N4-0 Nozzle ø4 4 5 N4-0 Nozzle ø 7 N4-04 Nozzle ø8 8 9 Optional Tips the FM-0 Please see the optional tips on P.40. Optional Tips the FM-0 Please see the optional tips on P.40. 7

27 N System N Generator / Highest concentration of nitrogen gas: 99.9% Compact design reduces footprint. Large-capacity type accepts soldering irons (FX-78). FX-780 FX-78 For one soldering iron Small-capacity type :FX-780 Large-capacity type :FX-78 N Flowmeter Regulator Water filter 0.0μm N generator FX-78 or FX-780 Soldering station FX-95 N flowmeter element in the FX-79 hand piece. Air filter 0.μm Air dryer The preheating effect is achieved by passing Nitrogen gas along the heating Improvement of wettability and spreadability Preventing oxidation N soldering iron FM-0 Compressor Flowmeter N soldering iron with flow control valve and regulator *It is capable to supply high concentration Nitrogen of 99.9% at the output rate approx. L /min. (at air supply pressure of 0.7MPa) Connection Method Specifications For two soldering irons Regulator N generator FX-78 N flowmeter FX-79 Joint N flowmeter FX-79 Large-capacity type :FX-78 Water filter Air filter 0.0μm 0.μm Air dryer Compressor Soldering station FX-95 N soldering iron FM-0 Soldering station FX-95 N soldering iron FM-0 FX-780 FX-78 Air supply pressure Concentration of generated N Amount of generated N.5 L /min. (When compressed air of MPa is supplied at 5 C, the concentration of the generated nitrogen is 98%.) 0. to 0.7 MPa 99.9% (max.).4 L /min. (When compressed air of MPa is supplied at 5 C, the concentration of the generated nitrogen is 98%.) Dimensions* 7 (W) 8 (H) 7 (L) mm 7 (W) 407 (H) 7 (L) mm *.5 kg kg * Without sockets and valve ** Without racks *It is capable to supply high concentration Nitrogen of 97% at the output rate approx. L /min. (at air supply pressure of MPa) For one soldering iron Small-capacity type :FX-780 Large-capacity type :FX-78 FX-79 Pressure of discharged gas 0. MPa ( kgf/cm ) Gas flow to.5 L /min. Dimensions 70 (W) (H) 4 (D) mm Weight 00 g Regulator Water filter 0.0μm Air filter 0.μm Air dryer Compressor Packing List FX-780 Unit, Rack unit ( pcs), Instruction manual N generator FX-78 or FX-780 N flowmeter FX-79 Soldering station FX-95 FX-79 FX-78 Unit, Instruction manual Unit, Racks unit (4 pcs), Instruction manual N soldering iron FM-0 *It is capable to supply high concentration Nitrogen of 99.9% at the output rate approx. L /min. (at air supply pressure of 0.7MPa) 8

28 Applicable Soldering Station N FX-880 FM-0 New FM-0 FM-0 FX-80 5 W 48 W 70 W 40 W 50 W FX W FX-888D FX-889 FX-95 FM-0 FX-95 FM-0 FM-0 FX-88 FX-80 * Use FX-880 below 450 C. FM-0 FM-0 FM-04 FX-950 * Use FM-0 below 400 C. Effects of N system Heated N gas discharged from the tip end produces three effects. As a result, solderability increases, which allows you to enjoy the following advantages. Heated N₂ gas Compatible with no-clean soldering (low-activity flux) Solves the insufficient heat supply problems which may occur during soldering of multilayer boards Reduces tip oxidation Reduces soldering time Relieves loads applied to heat-sensitive parts Improving wettability Heated N gas preheats P.W.B.s and shuts out oxygen. As a result, it prevents the oxidation of solder and flux and improves wettability. Preventing oxidation Heated N gas reduces the oxidization of tips (iron plating). As a result, the wettability of tips is improved. After leaving it hours When feeding solder and cleaning Without N₂ With N₂ Test criteria After applying power hours with the temperature set at 400 C, feed solder and perm cleaning, and then compare the conditions. Preheating effect Heated N gas preheats the workpiece. As a result, even if the temperature setting is low, soldering can be finished in the same time as bee. Without N₂ With N₂ Temp. ( C) Setting temperature sec. Test criteria Board Component Solder Tip shape Measurement method 40 C Setting temperature sec. 0 C Soldering tip temp. Board temp. Time (sec.) Point Point Point Point 4 Point 5 Paper phenol copper board Connector Lead-free solder (Sn-Ag-Cu) Φmm T-D4 and T-D4 Measure the time until the workpiece reached to 50 at 5-points The three effects result in improved workability, quality stability and reduced running cost. 9

29 N System Replacement Tips and Nozzle Assemblies FX-880 Tip and nozzle assembly are supplied separately. Please purchase a compatible nozzle assembly your tip referring the chart below. Nozzle assembly T8-B Shape-B T8-C05 Shape-C T8-C Shape-C T8-CF* R ø.5 ø 0.5 T8-C Shape-C T8-CF*. ø T8-C Shape-C T8-CF*. T8-D08 Shape-0.8D 0. B Nozzle assembly A B4 Nozzle assembly C B4 Nozzle assembly C B Nozzle assembly A B Nozzle assembly B B Nozzle assembly A T8-D Shape-.D T8-D Shape-.D T8-D4 Shape-.4D T8-K Shape-K T8-I Shape-I Optional Tips and Nozzle Assemblies FM-0 Tip and nozzle assembly are supplied separately. Please purchase a compatible nozzle assembly your tip referring the chart below. Nozzle assembly 44 ø5.5 T-B Shape-B T-BL Shape-BL T-BC Shape-BC T-BCF* T-BC Shape-BC T-BCF* T-BC Shape-BC T-BCF* T-D08 Shape-0.8D R. ø.5. ø.5.. B708 Nozzle assembly C B898 Nozzle assembly E B899 Nozzle assembly F B70 Nozzle assembly A B900 Nozzle assembly G B709 Nozzle assembly D T-D Shape-.D T-D4 Shape-.4D T-J0 Shape-0.J T-KF Shape-KF T-KR Shape-KR T-KU Shape-KU ø..5 ø ø4.7.4 B708 Nozzle assembly C B708 Nozzle assembly C B707 Nozzle assembly B B9 Nozzle assembly J B90 Nozzle assembly I B90 Nozzle assembly H T-BCM Shape-BC Bevel with indent T-BCM Shape-BC Bevel with indent ø ø B70 Nozzle assembly A B900 Nozzle assembly G * These tips are tinned on the soldering surface only. Optional Tips and Nozzle Assemblies FM-0 ø7. ø5.5 Nozzle assembly 87 T-BL Shape-BL T-BL Shape-BL T-BC Shape-BC T-C Shape-C T-C5 Shape-5C T-C Shape-C ø ø5 ø ø. ø. ø.4 ø5 0.7 B Nozzle assembly A B Nozzle assembly B B Nozzle assembly B B5 Nozzle assembly D B4 Nozzle assembly C 4 * These tips are tinned on the soldering surface only. Tip and nozzle assembly are supplied separately. Please purchase a compatible nozzle assembly your tip referring the chart below. 5 R B Nozzle assembly A B Nozzle assembly A B Nozzle assembly A B Nozzle assembly A B4 Nozzle assembly D B4 Nozzle assembly D T-D08 Shape-0.8D T-D Shape-.D T-D Shape-.D T-D4 Shape-.4D T-D Shape-.D T-D45 Shape-4.5D ø. ø. ø.4. ø B Nozzle assembly C B Nozzle assembly A B Nozzle assembly C B5 Nozzle assembly E B4 Nozzle assembly D B4 Nozzle assembly D T-D5 Shape-5.D T-J0 Shape-0.J T-JD08 Shape-0.8JD T-K Shape-K ø5. 4. ø B4 Nozzle assembly D B Nozzle assembly A B5 Nozzle assembly E B Nozzle assembly C 40

30 Optional Tips and Nozzle Assemblies FM-0 C508 Nozzle assembly A C509 Nozzle assembly B C5040 Nozzle assembly C C504 Nozzle assembly D* Nozzle assembly B58 Hose assembly (:.4 m) T0-D Shape-D T0-D0 Shape-0.D T0-I Shape-I T0-J Shape-J T0-KU Shape-KU T0-KN Shape-KN 0. ø.5 0. ø0..5 R Tip and nozzle assembly are supplied separately. Please purchase a compatible nozzle assembly your tip referring the chart below. ø ø C508 Nozzle assembly A C504 Nozzle assembly D* * Shorter nozzle design provides better visibility. For further inmation, visit our website. C508 Nozzle assembly A C504 Nozzle assembly D* C508 Nozzle assembly A C504 Nozzle assembly D* Optional Tips and Nozzle Assemblies FX-80 C5040 Nozzle assembly C C504 Nozzle assembly D* C508 Nozzle assembly A C504 Nozzle assembly D* Tip and nozzle assembly are supplied separately. Please purchase a compatible nozzle assembly your tip referring the chart below. C509 Nozzle assembly B C504 Nozzle assembly D* Nozzle assembly ø7. 90 T0-B Shape-B T0-BL Shape-BL T0-BL Shape-BL T0-J0 Shape-0.J (0.RSB).5 T0-KU Shape-KU T0-BL Shape-BL R 5 R R 5 B Nozzle assembly A B Nozzle assembly A B Nozzle assembly A B Nozzle assembly B B Nozzle assembly B B Nozzle assembly C T0-D Shape-.D T0-K Shape-K T0-BC Shape-BC T0-BC Shape-BC T0-BC4 Shape-4BC T0-C5 Shape-5C T0-BCF* T0-BCF* T0-BCF4* ø. ø5 4. ø ø4 5. ø5 B Nozzle assembly C B Nozzle assembly C B4 Nozzle assembly D B4 Nozzle assembly D B4 Nozzle assembly D B4 Nozzle assembly D T0-C Shape-C T0-D4 Shape-.4D T0-D Shape-.D T0-BCM Shape-BC T0-BCM Shape-BC T0-D Shape-D Bevel with indent Bevel with indent ø ø ø.4.5. ø.5 B4 Nozzle assembly D B4 Nozzle assembly D B4 Nozzle assembly D B4 Nozzle assembly D B4 Nozzle assembly D B5 Nozzle assembly E T0- T B4 Nozzle assembly D B4 Nozzle assembly D * These tips are tinned on the soldering surface only. Optional Tips and Nozzle Assemblies FX-800 Tip and nozzle assembly are supplied separately. Please purchase a compatible nozzle assembly your tip referring the chart below. ø.5 T-BC Shape-BC T-BC Shape-BC T-BC4 Shape-4BC T-BC5 Shape-5BC T-BC Shape-BC T-D4 Shape-.4D ø ø4 ø5 ø ø B5070 Nozzle assembly B B5070 Nozzle assembly B B509 Nozzle assembly A B509 Nozzle assembly A B509 Nozzle assembly A B5070 Nozzle assembly B T-D Shape-.D T-D5 Shape-5D T-D Shape-D T- T-.... ø5 ø B509 Nozzle assembly A B509 Nozzle assembly A B509 Nozzle assembly A B5070 Nozzle assembly B B5070 Nozzle assembly B 4

31 Ceramic Heater Temperature Adjustable Tip included Adjustable temperature range: 00 to 500ºC Heavy Duty Temperature Adjustable Tip included Maximum temperature: 540ºC Features Superior heat conductivity Temperature ( C) 400 Temperature ( C) 00 Temperature ( C) FX-00 HAKKO 9 (conventional model) FX-0 HAKKO 455 (conventional model) FX-0 HAKKO 45 (conventional model) Time (sec.) Time (sec.) 0 00 Test criteria Temperature of soldering iron with a diameter. x 5 mm piece of solder applied once every seconds to paper phenol copper board. Lead-free solder is used. Detach the control knob and lock the temperature setting. Specifications Power consumption Temperature range Temperature stability FX-00 FX-0 00 to 500ºC 40 to 540ºC ±ºC at idle temperature ±ºC at idle temperature 50 W (0 V), 59 W 47 W (0 V), 5 W ( V), 74 W (0 V), ( V), 7 W (0 V), 4 W (0 V), 47 W 4 W (0 V), 4 W (0 V), 5 W (40 V) (0 V), 50 W (40 V) < Ω < Ω < mv < mv Ceramic heater Ceramic heater Standard tip Shape-B (No. T8-B) Shape-B (No. T9-B) mm (with B tip) 7 mm (with B tip) g (with B tip) 8 g (with B tip) Time (sec.) Turn the CAL knob to attain a more accurate temperature. * Accurate temperature control can be permed even outside the scale.

32 Packing List FX-00 Unit, Lock key, Instruction manual FX-0 Unit, Lock key, Instruction manual FX-00 with 05M Option Part No. Name Specifications FH00-8 Iron holder With cleaning sponge -0 Iron holder With 599B -0 Iron holder With cleaning sponge 05M Iron cover B70 B70 Tip enclosure Nut and tip enclosure * For inmation on the iron holders, see P.0. With nut, required when converting from FX-00 to FX-0 Required when converting from FX-0 to FX-00 Replacement Tips FX-00 T8-B Shape-B T8-BL Shape-BL T8-C05 Shape-C T8-C08 Shape-0.8C T8-C Shape-C T8-CF* R ø ø T8-C Shape-C T8-CF* T8-C Shape-C T8-CF* T8-C4 Shape-4C T8-CF4* T8-C5 Shape-5C T8-CF5* Shape-.5C ø ø4 ø5 ø T8-CSF5* Shape-.5CS T8-D08 Shape-0.8D T8-D Shape-.D T8-D Shape-.D T8-D4 Shape-.4D. 0 ø.5 ø. ø. ø T8-D Shape-.D T8-DL Shape-.DL T8-DL Shape-DL T8-DL Shape-.DL T8-I Shape-I. ø. ø T8-BR0 Shape-0.BR T8-K Shape-K T8-S Shape-S T8-S4 Shape-S4 T8-S Shape-S ø5 4 ø5. 8 R0.5. ø. 0.5 T8-S9 Shape-S9 T8-SB Shape-SB ø * These tips are tinned on the soldering surface only. Replacement Tips FX-0 T9-B Shape-B T9-B Shape-B T9-C Shape-C T9-C4 Shape-4C T9-C5 Shape-.5C R R ø T9-D4 Shape-.4D T9-D Shape-.D T9-D5 Shape-5D T9-D5 Shape-.5D T9-I Shape-I.5 ø.5 ø ø5 8 ø.5 8 4

33 Ceramic Heater Ceramic Heater Tip included An entry model of ceramic heater soldering iron Ideal electronic circuit assembly Packing ist FX-50 Featres Unit Sianeipoesooeficienc Sipeaneastipepaceent Diameter 5 mm Specifications FX-50 Power consumption 5 to W Ceramic heater Standard tip Shape-B (No.T4-B) 4 mm 0 g (with B tip) Option Part No. Name Specifications FH00-8 Iron holder With cleaning sponge -0 Iron holder With 599B -0 Iron holder With cleaning sponge 05M Iron cover * For inmation on the iron holders, see P.0. Quick change just loosing a screw Replacement Tips S No.05M (with FX-50) T4-B Shape-B T4-C08 Shape-0.8C T4-C Shape-C T4-C Shape-C T4-C4 Shape-4C R T4-D Shape-.D T4-I Shape-I

34 SitcaeeaiceateSoeinon Tip included No. 980 The boost switch can immediately raise the power from 0 W in normal operation mode to 0 W, which enables the soldering iron to be heated up at a high speed. PRESTO can be used a wide range of applications. A safety cap is available 984 and 985. No. 98 When capped No. 985 No. 984 Packing ist 980, 98 Unit 984, 985 Unit, Safety cap Specifications Power consumption 0/0 W (while the switch is pushed) Ceramic heater Standard tip Shape-B (No. 980-T-B) 05 mm 0 mm 05 mm 0 mm 48 g 9 g 5 g 0 g and cap Option Part No. Name Specifications FH00-8 Iron holder With cleaning sponge -0 Iron holder With 599B -0 Iron holder With cleaning sponge * For inmation on the iron holders, see P.0. Replacement Tips PRSTO 980-T-B Shape-B 980-T-BC Shape-BC 980-T-BI Shape-BI 980-T-D Shape-D R ø

35 Battery-Powered Battery-Powered Tip included Easy-to-carry soldering iron powered by AA alkaline batteries Cordless design makes this iron very handy and usable virtually anywhere. as Replacement Easy tip replacement Packing ist FX-90 * Batteries not included Unit, Cap Turn the nipple 90 clockwise. Easy battery replacement Specifications Power supply Power consumption Standard tip Battery life* * ** FX-90 AA 4 pcs Alkaline batteries: W ( V) Nickel hydrogen batteries (50 mah): 5 W (4.8 V) Shape-B (No.T-B) Alkaline batteries: 0 minutes Nickel hydrogen batteries (50 mah): 0 minutes mm 7 g Measurement conditions When using new batteries, permance will vary depending on the batteries. The operating time was measured from the point that the soldering iron was turned on to the point at which the temperature dropped below 00ºC, which is the minimum temperature at which soldering can be permed. * When using batteries other than those specified above, the permance and the operating time will vary. ** Without cap *** Without battery Replacement Tips FX T-B Shape-B T-D4 Shape-4D ø

36 Nichrome Heater Nichrome Heater Tip included Ideal use in a variety of soldering works Specifications Power consumption 0 W 0 W 40 W 0 W Nichrome heater Standard tip 5 mm (No.BB) ø4 70 mm (No.BB4) ø 85 mm (No.BB) 99 mm 07 mm 48 mm 0 g 5 g 95 g Option Part No. Name Specifications 0 Iron holder With cleaning sponge 0 Iron holder With cleaning sponge * For inmation on the iron holders, see P.0. Solder Feed Soldering Gun Tip included Solder feed mechanism built in the body allows users to make fine adjustments. Specifications Power consumption 0 W 40 W 0 W 80 W 0 W 50 W Standard tip ø4 mm (No.58-T-4) Nichrome heater ø mm (No.585-T-) ø8 mm (No.587-T-8) ø mm (No.59-T-) Dimensions 97 x 49 mm x 49 mm 7 x 49 mm 4 x 49 mm g 90 g 8 g g 80 g Packing ist 58, 58, 585, 587, 589, 59 Unit,. mm diameter Guide nozzle, Instruction manual *. mm diameter guide nozzle is originally set into the unit. Option Part No. Name Specifications 58-N-0.8 Guide nozzle 0.8 mm 58-N-.0 Guide nozzle mm 58-N-. Guide nozzle. mm 07 Iron holder With cleaning sponge 58-0 Spool holder * For inmation on the iron holder, see P.0. 47

37 Soldering Pot High Permance Soldering Pot Digital Digital display ensures reliable temperature control and realizes precise temperature adjustment. Soldering pot is coated in a special long-life material, which is best suited lead-free solder. This is provided as a standard feature. High Permance Soldering Pot Analog Temperature can be adjusted just by turning a knob during operation. Adding an optional specially coated stainless-steel pot provides compatibility with lead-free solder. 48

38 Quick Heat Up Time comparison to reach set temperature FX-0B vs. HAKKO 9 (conventional model) Temperature ( C) 400 Packing List FX-0B FX-00 Unit (with solder pot, durable type), Spatula, J-shaped waste collector, Hexagon wrench, Instruction manual Unit (with solder pot, 50 50), Spatula, J-shaped waste collector, Hexagon wrench, Instruction manual Soldering Pot 00 Specifications 00 0 Test criteria Set temperature: 00 C Solder: Sn-Cu (Tin and copper) Time to reach set temperature (within ±ºC) FX-0B (Parameter setting Sn-Cu) HAKKO 9 Power consumption Dimensions FX-0B 00 W (0 V), 0 W ( V), 90 W (0 V), 40 W (0 V), 0 W (0 V), 80 W (40 V) 4 (W) 0 (H) 0 (D) mm.7 kg 0 Temperature ( C) Time (min.) FX-00 vs. HAKKO 9 (conventional model) Pot Temperature range Dimensions of solder pot Molten solder capacity** square: 00 to 450 C square: 00 to 80 C square durable type: 50 (W) 4. (H) 50 (D) mm square durable type: 75 (W) 5. (H) 75 (D) mm square: 0.85 kg square:. kg 00 0 Test criteria Set temperature: 00 C Solder: Tin (0%) Time to reach set temperature (within± C) FX-00 HAKKO Time (min.) Easy Pot Replacement Power consumption Dimensions FX W (0 V), 0 W ( V), 00 W (0 V), 90 W (0 V), 05 W (0 V), 5 W (40 V) 4 (W) 0 (H) 0 (D) mm.7 kg Pot square: 00 to 450 C Temperature range square: 00 to 80 C square standard type: 50 (W) 4. (H) 50 (D) mm Dimensions of solder pot square standard type: 75 (W) 5. (H) 75 (D) mm square: 0.85 kg Molten solder capacity** square:. kg * Without solder and cord ** The square solder pot is originally installed. The square solder pot is an optional part. Option / Replacements Loosen the screw on both sides. Change the pot and tighten the screws. * For your safety, be sure to replace the pot after the solder completely cools. Specially Coated Solder Pot (Durable type) The special coating prevents the solder pot from corroding, which ensures that the solder pot has a long service life. Part No. Name Specifications A59 Solder pot durable type A540 Solder pot durable type A5 Solder pot standard type A58 Solder pot standard type A Temperature probe For solder bath and pot Dimensions of Solder Pot square square Standard solder pot Specially coated solder pot 50 mm 47.4 mm 5 mm 4. mm 75 mm 50 mm 47.4 mm mm 4 mm 5. mm 49

39 Soldering Pot and Flow Soldering System Soldering Pot Temperature can be adjusted just by turning a knob during operation. Features Dimensions of Solder Pot Packing List 9, 9- Unit, Spatula, Instruction manual Operation square 50 mm 0 mm mm 54 mm mm square 70 mm 50 mm 0 mm 7 mm 4 mm Specifications Part No Power consumption 00 W Dimensions 5 (W) 5 (H) 4 (D) mm 5 (W) 0 (H) 4 (D) mm.5 kg. kg Temperature range 0 to 450ºC 0 to 80ºC Dimensions of solder pot 50 (W) 54 (H) 50 (D) mm 70 (W) 4 (H) 70 (D) mm Molten solder capacity 0.85 kg. kg Flow Soldering System Compatible with lead-free solder The impeller and chamber, which are the parts that corrode most easily, are plated with corrosion-resistant material. Both temperature and time are used to control the solder flow. Dimensions Packing List mm 80 mm 500 mm mm 45 mm 550 mm Main unit, Air unit, Lamp ( W [ V]), Horizontal gauge, Spatula, IC tweezers, Waste collector, Positioning board, Foot switch, Locator light, Anti-oxidizer, 4-pin nozzle, 8-pin nozzle, 8/0-pin nozzle, 4/-pin nozzle, 4-pin air hood, 8-pin air hood, 8/0-pin air hood, 4/-pin air hood, Instruction manual Specifications 485 Power consumption 850 W Temperature range Room temperature to 00ºC Molten solder capacity kg Dimensions 500 (W) 45 (H) 550 (D) mm 5 kg Air unit Air pressure 9 to 8 kpa ( to 7 kgf/cm ) Dimensions 50 (W) 0 (H) 00 (D) mm *.5 kg * Without solder and cord * * Solder is not included. 50