products 22 º C Ventilation Air Conditioning Refrigeration Cooling plant Inside PROVIDED BY HEINEN & HOPMAN

Size: px

Start display at page:

Download "products 22 º C Ventilation Air Conditioning Refrigeration Cooling plant Inside PROVIDED BY HEINEN & HOPMAN"

Ruth Booth
5 years ago
Views:

1 products > Cooling plant OUTSIDE 35 C HUMIDITY 90% 22 º C Inside PROVIDED BY HEINEN & HOPMAN Heating Ventilation Air Conditioning Refrigeration

cooling plant A cooling plant belongs to the main units of an air conditioning system. Without a cooling plant it will be impossible to meet a comfort inside climate when cooling is needed.

The diagram below shows the complete cooling circuit with all the main component as well the phase of the refrigerant in each stage of the circuit.

Scroll compressor 3. Screw compressor 4. Centrifugal compressor Semi hermetic screw compressor Hermetic scroll compressor Which kind of compressor is needed, depends on the needed capacity.

The most compressors are available in hermetic type, semi-hermetic type or open type.

2 cooling plant A cooling plant belongs to the main units of an air conditioning system. Without a cooling plant it will be impossible to meet a comfort inside climate when cooling is needed. A cooling plant consist of four main components Compressor, condenser, expansion valve and evaporator. The diagram below shows the complete cooling circuit with all the main component as well the phase of the refrigerant in each stage of the circuit. Compressor The compressor is a mechanical device that increase the pressure of the refrigerant gas by reducing the volume. There are four kind of compressors: 1. Reciprocating compressor 2. Scroll compressor 3. Screw compressor 4. Centrifugal compressor Semi hermetic screw compressor Hermetic scroll compressor Which kind of compressor is needed, depends on the needed capacity. Scroll and vacuum compressors are used for low compressor capacity and screw and centrifugal compressors are used for high compressor capacity. The most compressors are available in hermetic type, semi-hermetic type or open type. The selection of a cooling plant depends on several factors like the required cooling capacity, the refrigerant type and cooling medium. There are two groups of cooling plants: - Direct expansion (DX) unit: A DX unit is mostly located near by the air handling unit to avoid long refrigerant pipe through the ship. The cooling coil inside the air handling unit operates as evaporator of the cooling plant. - Chilled water unit (CWU): are used for ships where there is a long distance between the air handling unit and the cooling plant or with several air handling units. The chilled water (mostly with a percentage of glycol) will be used as cooling medium between the evaporator and the cooling coil inside the air handling unit. An advantage of this system is that it avoids the long refrigerant pipes filled with Freon on board. Alternatives available on request. Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

Condenser A condenser is a heat exchanger that extract the heat of the compressed refrigerant by transferring it to a

There are two different groups of condensers: Air cooled condenser Water cooled condenser The orifice within the valve

Heat molecules contained in the liquid refrigerant are thus allowed to spread as the refrigerant moves out of the

Under a greatly reduced pressure the liquid refrigerant is at its coldest as it leaves the expansion valve and enters

There are two kind of expansion valve: Air cooled condenser Water cooled condenser (shell/tube) Thermostatic expansion

Evaporators An evaporator is used to vaporize liquid into its vapor state.

The evaporator is used as heat exchanger to allow a compressed refrigerant to evaporate from liquid to gas while

Plate heat exchanger shell/tube condenser The size of the condenser depends on the available cooling medium (water or

There are three types of evaporators: Shell and tube evaporator Plate heat exchanger Finned pipe heat exchanger

3 Condenser A condenser is a heat exchanger that extract the heat of the compressed refrigerant by transferring it to a cooling medium (air/ water). In the condenser the refrigerant transforms from its vapor to its liquid state. There are two different groups of condensers: Air cooled condenser Water cooled condenser The orifice within the valve does not remove heat, but only reduces pres-sure. Heat molecules contained in the liquid refrigerant are thus allowed to spread as the refrigerant moves out of the orifice. Under a greatly reduced pressure the liquid refrigerant is at its coldest as it leaves the expansion valve and enters the evaporator. The expansion valve controls the amount of the refrigerant that flow into the evaporator. There are two kind of expansion valve: Air cooled condenser Water cooled condenser (shell/tube) Thermostatic expansion valve Electronic expansion valve The water condensers can be divided in two types shell/tube or plate heat exchanger. Evaporators An evaporator is used to vaporize liquid into its vapor state. It is one of the main components in an air conditioning system. The evaporator is used as heat exchanger to allow a compressed refrigerant to evaporate from liquid to gas while absorbing the heat from the surroundings and transfer its cooling capacity to the surrounding medium (air or water). Plate heat exchanger shell/tube condenser The size of the condenser depends on the available cooling medium (water or air) and the temperature of the cooling medium. There are three types of evaporators: Shell and tube evaporator Plate heat exchanger Finned pipe heat exchanger Expansion valve The expansion valve removes pressure from the liquid refrigerant to allow expansion (change the state from liquid to a vapor) in the evaporator. The liquid refrigerant under high pressure entering the expansion valve is warm, the liquid refrigerant leaving the expansion valve is quite cold. Shell/tube evaporator DX Cooling coil evaporator Alternatives available on request. Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

4 Condensing units 50Hz HHSSC - SERIE R407C / R134a [m 3 /h] HHSSC1 30 / 20 9 / x 0.52 x HHSSC2 65 / / x 0.57 x HHSSC3 95 / / x 0.61 x HHSSC4 135 / / x 0.61 x HHSSC5 170 / / x 0.66 x HHSSC6 220 / / x 0.66 x *Power supply: 3 ~ 400 V / 50 H *Sea water temperature: 32 0 C *Evaporating temperature (mean): 5 0 C HHSFC - SERIE R407C / R134a [m 3 /h] HHSFC1 30 / 20 9 / x 0.52 x HHSFC2 65 / / x 0.57 x HHSFC3 95 / / x 0.61 x HHSFC4 135 / / x 0.61 x HHSFC5 170 / / x 0.66 x HHSFC6 220 / / x 0.66 x *Power supply: 3 ~ 400 V / 50 H *Fresh water temperature: 38 0 C *Evaporating temperature (mean): 5 0 C Alternatives available on request. Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice. Maximum allowable line length is 10m with a maximum height difference of 3m for each unit. Units are designed according EN and delivered with 1 bar(e) dry-nitrogen transport pressure. Units shall be mounted longitudinal with the vessel. When mounting transversal the optional liquid-manifold shall be installed.

Condensing units 60Hz HHSSC - SERIE R407C / R134a [m 3 /h] HHSSC1 37 / 25 10 / 6 20 10 1.22 x 0.52 x 0.75 250 HHSSC2 78 / 54 21 / 14 43 19 1.68 x 0.57 x 0.86 350 HHSSC3 114 / 80 31 / 17 60 30 1.

27 850 HHSSC6 265 / 178 71 / 43 135 60 1.76 x 0.66 x 1.

5 Condensing units 60Hz HHSSC - SERIE R407C / R134a [m 3 /h] HHSSC1 37 / / x 0.52 x HHSSC2 78 / / x 0.57 x HHSSC3 114 / / x 0.61 x HHSSC4 164 / / x 0.61 x HHSSC5 205 / / x 0.66 x HHSSC6 265 / / x 0.66 x *Power supply: 3 ~ 400 V / 60 H *Sea water temperature: 32 0 C *Evaporating temperature (mean): 5 0 C HHSFC - SERIE R407C / R134a [m 3 /h] HHSFC1 37 / / x 0.52 x HHSFC2 78 / / x 0.57 x HHSFC3 114 / / x 0.61 x HHSFC4 164 / / x 0.61 x HHSFC5 205 / / x 0.66 x HHSFC6 265 / / x 0.66 x *Power supply: 3 ~ 400 V / 60 H *Fresh water temperature: 38 0 C *Evaporating temperature (mean): 5 0 C Alternatives available on request. Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice. Maximum allowable line length is 10m with a maximum height difference of 3m for each unit. Units are designed according EN and delivered with 1 bar(e) dry-nitrogen transport pressure. Units shall be mounted longitudinal with the vessel. When mounting transversal the optional liquid-manifold shall be installed.

Chilled water units 50Hz Advantages: High quality assured; Standard Capacity control 25%, 50%, 75% and 100%; Refrigerant 134a, [complies with the most ship classifications]; All common power supplies

Two fully independent circuit. Design note Chilled water IN/OUTLET temperature 12/6 0 C Units are designed according EN 378-2008 and delivered with complete refrigerant charge.

6 Chilled water units 50Hz Advantages: High quality assured; Standard Capacity control 25%, 50%, 75% and 100%; Refrigerant 134a, [complies with the most ship classifications]; All common power supplies available on request; Paint color standard RAL6011 other colors available on request; Easy accessible for maintenance and cleaning; Fully ventilated electric switch board; Easy cleanable condensers; Two fully independent circuit. Design note Chilled water IN/OUTLET temperature 12/6 0 C Units are designed according EN and delivered with complete refrigerant charge. Units can be delivered with 1 Bar(e) drynitrogen transport pressure. Optional: Step less capacity control 25% till 100%; All other power supplies available on request; Troubleshooting on distance. HHSCHSC - SERIE R134a 50/60 Hz [m 3 /h] condenser [m 3 /h] chiller HHSCHSC x 32 2 x 92 2 x 16,5 27, x 1.00 x HHSCHSC x 46,4 2 x x 24,9 39, x 1.20 x HHSCHSC x 54,5 2 x x 25,8 48, x 1.20 x HHSCHSC x 67,6 2 x x 30,2 61, x 1.25 x HHSCHSC x 92,2 2 x x 46,6 83, x 1.40 x HHSCHSC x 102,6 2 x x 50,2 96, x 1.60 x HHSCHSC x 138,9 2 x x 67,7 128,8 3,75 x 1,65 x 2, HHSCHSC x x x 93, ,50 x 1,75 x 2x *Power supply: 3 ~ 400 V / 50 H *Sea water temperature: 32 0 C *Evaporating temperature (mean): 1 0 C HHSCHFC - SERIE R134a 50/60 Hz [m 3 /h] condenser [m 3 /h] chiller HHSCHFC x 32 2 x 92 2 x 14,5 27, x 1.00 x HHSCHFC x 46,4 2 x x 20 39, x 1.20 x HHSCHFC x 54,5 2 x x 22,8 48, x 1.20 x HHSCHFC x 67,6 2 x x 26,7 61, x 1.25 x HHSCHFC x 92,2 2 x x 41,2 83, x 1.40 x HHSCHFC x 102,6 2 x x 44,3 96, x 1.40 x HHSCHFC x 138,9 2 x x 63,9 128,8 4,06 x 1,60 x 2, HHSCHFC x x x 82, ,30 x 1,60 x 2, *Power supply: 3 ~ 400 V / 50 H *Fresh water temperature: 38 0 C *Evaporating temperature (mean): 1 0 C

Chilled water units 60Hz Advantages: High quality assured; Standard Capacity control 25%, 50%, 75% and 100%; Refrigerant 134a, [complies with the most ship classifications]; All common power supplies

7 Chilled water units 60Hz Advantages: High quality assured; Standard Capacity control 25%, 50%, 75% and 100%; Refrigerant 134a, [complies with the most ship classifications]; All common power supplies available on request; Paint color standard RAL6011 other colors available on request; Easy accessible for maintenance and cleaning; Fully ventilated electric switch board; Easy cleanable condensers; Two fully independent circuit. Design note Chilled water IN/OUTLET temperature 12/6 0 C Units are designed according EN and delivered with complete refrigerant charge. Units can be delivered with 1 Bar(e) drynitrogen transport pressure. Optional: Step less capacity control 25% till 100%; All other power supplies available on request; Troubleshooting on distance. HHSCHSC - SERIE R134a 50/60 Hz [m 3 /h] condenser [m 3 /h] chiller HHSCHSC x 38,5 2 x x 17,4 29,4 3,20 x 1,00 x 1, HHSCHSC x 55,8 2 x x ,30 x 1,20 x HHSCHSC x 65,6 2 x x 31,3 58, x 1,20 x HHSCHSC x 84,4 2 x x 35,9 73,4 3,70 x 1,25 x 1, HHSCHSC x x x 53,3 95,4 3,70 x 1,40 x 2, HHSCHSC x 123,5 2 x x 60,8 117,4 3,70 x 1,60 x 2, HHSCHSC x 167,2 2 x x 82,3 146,8 3,75 x 1,65 x 2, HHSCHSC x 206,9 2 x x 102,6 176,2 4,50 x 1,75 x 2, *Power supply: 3 ~ 400 V / 60 H *Sea water temperature: 32 0 C *Evaporating temperature (mean): 1 0 C HHSCHFC - SERIE R134a 50/60 Hz [m 3 /h] condenser [m 3 /h] chiller HHSCHFC x 38,5 2 x x 16,3 29,4 3,20 x 1,00 x HHSCHFC x 55,8 2 x x 22,5 44 3,30 x 1,20 x 1, HHSCHFC x 65,6 2 x x 27,6 58,7 3,30 x 1,20 x HHSCHFC x 84,4 2 x x 31,7 73,4 3,48 x 1,25 x HHSCHFC x x x 47,1 95,4 3,49 x 1,40 x 2, HHSCHFC x 123,5 2 x x 53,7 117,4 3,49 x 1,40 x 2, HHSCHFC x 167,2 2 x x 72,6 146,8 4,06 x 1,60 x 2, HHSCHFC x 206,9 2 x x 90,5 176,2 4,30 x 1,60 x 2, *Power supply: 3 ~ 400 V / 60 H *Fresh water temperature: 38 0 C *Evaporating temperature (mean): 1 0 C

Yacht chilled water units Design notes: Sea water temperature: 32 0 C evaporating temperature (dew) 2 0 C - Chilled water IN/OUTLET temperature 6 /

refrigerant charge; Units can be delivered with 1 Bar(e) dry-nitrogen transport pressure.

controllers; Refrigerant R410a; Design based upon Heinen & Hopman successful worldwide deployed Yacht chillers; All common power supplies available

condensers; Two fully independent cooling circuits; Troubleshooting on distance.

HHCHSC1 90 30 20 72 2 x 10 13,5 1.52 x 0.72 x 1.55 990 HHCHSC2 120 40 30 95 2 x 13 17x5 1.52 x 0.72 x 1.55 1010 HHCHSC3 150 50 40 119 2 x 16 22 1.

8 Yacht chilled water units Design notes: Sea water temperature: 32 0 C evaporating temperature (dew) 2 0 C - Chilled water IN/OUTLET temperature 6 / 12 0 C; Power supply: 3 x 400 / 440V 50/60 Hz other voltages on request; Units are designed according EN and delivered with complete refrigerant charge; Units can be delivered with 1 Bar(e) dry-nitrogen transport pressure. Advantages: High quality assured; Standard capacity control 25% till 100% [step less]; Low starting current due to the use of frequency controllers; Refrigerant R410a; Design based upon Heinen & Hopman successful worldwide deployed Yacht chillers; All common power supplies available on request; Paint color fully customizable; Easy accessible for maintenance and cleaning; Fully conditioned electric switch board; Easy cleanable condensers; Two fully independent cooling circuits; Troubleshooting on distance. Heinen & Hopman standard yacht chillers range kw 50 / 60 Hz HHCHSC Sea water serie* R410a Option heating [m 3 /h condenser] [m 3 /h chiller] HHCHSC x 10 13, x 0.72 x HHCHSC x 13 17x x 0.72 x HHCHSC x x 0.72 x HHCHSC x 20 26, x 0.79 x HHCHSC x 23 35, x 0.79 x Alternatives available on request. Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

Brazil T: +5521 3587 4241/4244 E: info@br.heinenhopman.com France - La Ciotat T: +334 4204 8685 E: info@heinenhopmanfrance.com France - Grasse T: +336 3090 7786 E: info@heinenhopmanfrance.

10 Brazil T: /4244 E: France - La Ciotat T: E: info@heinenhopmanfrance.com France - Grasse T: E: info@heinenhopmanfrance.com Germany T: E: info@drewsmarine.com India T: E: info@heinenhopmanindia.com Italy T: E: info@it.heinenhopman.com The Netherlands (HQ) T: E: info@heinenhopman.com The Netherlands (Rotterdam) T: E: binnenvaart@heinenhopman.nl Norway T: E: admin@teknotherm.no Peoples Republic of China T: E: info@cn.heinenhopman.com Peoples Republic of China T: E: ivo.klaric@teknotherm.no Poland T: E: tmh@teknotherm.no Romania T: E: office@ro.heinenhopman.com Russia T: +7 (4012) E: info@heinenhopman.ru Singapore T: E: info@sg.heinenhopman.com South Korea T: E: info@kr.heinenhopman.com Spain T: E: info@es.heinenhopman.com Sweden T: E: mats.uden@teknotherm.no Turkey T: E: info@tr.heinenhopman.com UAE (Abu Dhabi) T: E: info@caspuae.com UAE (Dubai) T: E: info@caspuae.com USA - Fort Lauderdale, Florida T: E: info@arwmaritime.com USA - Houma, Louisiana T: E: leblanc@leblancandassociates.com Heinen & Hopman encourages a more sustainable world. By providing eco-friendly solutions and services we offer our clients the option of reducing energy consumption and thus CO2 emissions. Visit greenmanifest.info for more information.

products 22 º C Ventilation Air Conditioning Refrigeration Self Contained Units - AM Inside PROVIDED BY HEINEN & HOPMAN

products 22 º C Ventilation Air Conditioning Refrigeration Self Contained Units - AM Inside PROVIDED BY HEINEN & HOPMAN products > Self Contained Units - AM OUTSIDE 35 C HUMIDITY 90% 22 º C Inside PROVIDED BY HEINEN & HOPMAN Heating Ventilation Air Conditioning Refrigeration Self contained units VK self-contained marine