TM TM SILENT X-STREAM AIR BLADE IONIZER. Powerful and quiet static eliminator rapidly dissipates static charge and removes dust.

Transcription

1 - SILENT X-STREAM AIR BLADE IONIZER SILENT X-STREAM AIR BLADE IONIZER Powerful and quiet static eliminator rapidly dissipates static charge and removes dust. The Silent X-Stream Air-Blade Air Knife utilizes the quality Haug static bars - the RN bar for most applications or the extra strong VS bars (Triple X versions) for very high static charges and extremely high speeds. The Silent X-Stream Air-Blade Air Knife uses a small amount of compressed air for a powerful, and adjustable force with "laminar" flow to eliminate charges in applications where static bars cannot reach or where high speeds are a factor, and to clean the surface. Normally the Standard Model RN Haug brand static bar can address most applications. For extremely high speeds and high charges the extra powerful VS model is used. For wash down applications (such as pharmaceutical areas), a washable model is available at extra cost. (Contact factory for information) All Haug static bars come with a patented safety connector and fully shielded cable. The power supplies are "repairable" and are so well made, that we offer a two year warranty on them (one year on the bars). SILENT X-STREAM AIR-BLADE IONIZER FEATURES: Connections on the back or ends It flows from end to end (full flow). Stainless steel models are available for high temperature and corrosive environments. Models are designed for easy cleaning and prevention of dirt entering the static bar, minimizing potential damage. Patented connectors with the ground intrinsic to the cable design. Instant ON/OFF with no moving parts. Repairable Power Supply with a two year warranty. SILENT X-STREAM AIR-BLADE IONIZER BENEFITS: Flexible mounting options. Units can be mounted end to end for longer lengths with no air gap. High temperature, extra strength, and even a unique washable stainless steel model is available for special applications or as required. Ease of cleaning and maintenance. No separate ground connection that can be cut and cause sparks or accidentally shock personnel Conserves air use when not required. Eliminates one costly area which is power supply replacement. 2 year warranty on power supplies. A model 153X X-Stream Air Blade Two Model 133 RN static bars neutralize lonizer neutralizes and cleans the surface of the plastic laminate preventing dust plate glass prior to laminating with plastic attraction. sheet. All three item are connected to one Model EN C-4-4- outlet power supply. Nex Flow Air Products Corp. 152 Yonge Street, Unit 35B-22 Richmond Hill, ON, Canada, L4C 3C7 Tel: Fax: or

2 - SILENT X-STREAM AIR BLADE IONIZER Electrical field strength kv/m Performance of Silent X-Stream Air Blade Ionizer with standard RN static bar With RN : 2.16 psig (1.4 bar) With RN : 1.8 psig (.7 bar) With RN : 4.32 psig (.3 bar) Time in milliseconds Electrical field strength kv/m Performance of Silent X-Stream Air Blade Ionizer with standard VS static bar Time in milliseconds With VS : 2.16 psig (1.4 bar) With VS : 1.8 psig (.7 bar) With VS : 4.32 psig (.3 bar) sales@nexflow.com sales@nexflowair.com sales@nex-flow.com Web:

3 - SILENT X-STREAM AIR BLADE IONIZER Increasing Distance from Charged Target Qualitative Chart Comparing lon Blowers and Air Blade Dissipation of static charge with distance. Air Blade Ionizer Ion Blower Increasing Time to Dissipate Charged Target lonizer PERFORMANCE AND RELIABILITY The standard RN static bar is very effective when mounted close to a surface (within an inch) at speeds up to 8 feet per minute and the strong VS bar can work to speeds up to 2 feet per minute mounted as close or at slower speeds up to 8 inches away. For greater distances and high speeds the addition of air is required. The laminar flow from an Air Blade Air Knife will extend the effectiveness over this extra distance. Even with laminar flow the ions will recombine and slow static dissipation slightly. For very highly charged surfaces and very high speeds, the extra strong VS static bar may be required. Apart from distance, the A ir Blade Air Knife allows enough force for blow-off of dust and dirt with little required. Blowers can actually be more effective in static removal closer to the surfacebut the Air Blade lonizer is more effective when further away (see chart comparing blowers and Air Blade lonizers above). This is why we recommend stronger static bars like our VS static bar for blowers when far from the target. Blowers however do not offer adequate blow-off force to clean unless they have very high flow and high static pressure. But when not close to the target, blower systems will still require a stronger static bar to match the rate of dissipation that an Air Blade lonizer can offer. The X- Stream Air Blade lonizer can work well for dust and dirt blow-off within the range of 2 to 4 PSI (1.4 to 2.8 Bar) line pressure (63mm) 1.78" (45mm) (28mm) 1.9" SIDE VIEW.83" (21mm) ANODIZED ALUMINIUM SILENT X-STREAM AIR BLADE AIR KNIFE WITH IONIZIN BAR & BRACKET 1.73" (43mm) E F 1." (25.4) CENTER TO CENTER SPACIN ON THREADED HOLES (TYPICAL ON ALL MODELS) A B 1/2"(12.7mm) OVERHAN OF STATIC BAR ON BOTH SIDES C ALL AIR CONNECTION 1/4 NPT* (H-INLET PORT) TOP VIEW (PLAN) M6 THREADED MOUNTIN HOLES (4NOS) * AA M6 THREADED THRU. CAN BE USED FOR ALTERNATIVE MOUNTIN HOLES * REAR VIEW 1/2"(12.7mm) C B A For Air Knife Dimensions please refer page B4 (* BSP Threads or Adaptors can be supplied depending on country location) Nex Flow Air Products Corp. 152 Yonge Street, Unit 35B-22 Richmond Hill, ON, Canada, L4C 3C7 Tel: Fax: or

4 - SILENT X-STREAM AIR BLADE IONIZER X-STREAM AIR BLADE IONIZERS PART NO. 9 DESCRIPTION 153X One 3 X-Stream Air Blade c/w Model RN Static Bar 156X One 6 X-Stream Air Blade c/w Model RN Static Bar 159X One 9 X-Stream Air Blade c/w Model RN Static Bar 1512X One 12 X-Stream Air Blade c/w Model RN Static Bar 1518X One 18 X-Stream Air Blade c/w Model RN Static Bar 1524X One 24 X-Stream Air Blade c/w Model RN Static Bar 153X One 3 X-Stream Air Blade c/w Model RN Static Bar 1536X One 36 X-Stream Air Blade c/w Model RN Static Bar 1542X 1548X One 42 X-Stream Air Blade c/w Model RN Static Bar 48 (Two 24 ) X-Stream Air Blade c/w Model RN Static Bar 1554X 54 (One 24 & One 3 ) X-Stream Air Blade c/w Model RN Static Bar 156X 6 (Two 3 ) X-Stream Air Blade c/w Model RN Static Bar 1566X 66 (One 3 & One 36 ) X-Stream Air Blade c/w Model RN Static Bar 1572X 72 (Two 36 ) X-Stream Air Blade c/w Model RN Static Bar 1578X 78 (One 36 & One 42 ) X-Stream Air Blade c/w Model RN Static Bar 1584X 1513X 84 (Two 42 ) X-Stream Air Blade c/w Model RN Static Bar 3 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 1516X 6 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 1519X 9 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 15112X 12 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 15118X 18 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 15124X 24 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 1513X 3 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 15136X 36 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 15142X 42 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 15148X 48 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 15154X 54 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 1516X 6 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 15166X 66 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 15172X 72 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 15178X 78 X-Stream Air Blade Ionizer plus ENC-2 Power Supply 15184X 84 X-Stream Air Blade Ionizer plus ENC-2 Power Supply Three 24 X-Stream Air Blade Ionizers Blow off dust from Automotive Bumpers prior to painting. The PLCFC controls the air on and off as required minimizing air consumption. In this case the static bars were daisy-chained together minimizing extraneous cable and reducing the number of power supplies needed. - sales@nexflow.com sales@nexflowair.com sales@nex-flow.com Web:

5 - SILENT X-STREAM AIR BLADE IONIZER SUPER TRIPLE X-STREAM AIR BLADE IONIZERS PART NO. 166X 169X 1612X 1618X 1624X 153X 1636X 1642X 1648X 1654X 166X 1666X 1672X 1678X 1684X 1616X 1619X 16112X 16118X 16124X 1613X 16136X 16142X 16148X 16154X 1616X 16166X 16172X 16178X 16184X DESCRIPTION One 6 Super Triple X-Stream Air Blade c/w Model VS Static Bar One 9 Super Triple X-Stream Air Blade c/w Model VS Static Bar One 12 Super Triple X-Stream Air Blade c/w Model VS Static Bar One 18 Super Triple X-Stream Air Blade c/w Model VS Static Bar One 24 Super Triple X-Stream Air Blade c/w Model VS Static Bar One 3 Super Triple X-Stream Air Blade c/w Model VS Static Bar One 36 Super Triple X-Stream Air Blade c/w Model VS Static Bar One 42 Super Triple X-Stream Air Blade c/w Model VS Static Bar 48 (Two 24 ) Super Triple X-Stream Air Blade c/w Model VS Static Bar 54 (One 24 & One 3 ) Super Triple X-Stream Air Blade c/w Model VS Static Bar 6 (Two 3 ) Super Triple X-Stream Air Blade c/w Model VS Static Bar 66 (One 3 & One 36 ) Super Triple X-Stream Air Blade c/w Model VS Static Bar 72 (Two 36 ) Super Triple X-Stream Air Blade c/w Model VS Static Bar 78 (One 36 & One 42 ) Super Triple X-Stream Air Blade c/w Model VS Static Bar 84 (Two 42 ) Super Triple X-Stream Air Blade c/w Model VS Static Bar 6 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply 9 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply 12 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply 18 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply 24 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply 3 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply 36 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply 42 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply 48 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply 54 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply 6 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply 66 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply 72 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply 78 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply 84 Super Triple X-Stream Air Blade Ionizer plus ENC-2 Power Supply A Model 16118X removes static from extruded rubber web on a rewind. Previously the static charge was so high that any spark would cause the rubber to burn which regularly happens the 'extra strong' VS Bar combined with the X-stream Air T M Blade eliminated this unsafe situation. Nex Flow Air Products Corp. 152 Yonge Street, Unit 35B-22 Richmond Hill, ON, Canada, L4C 3C7 Tel: Fax: or

6 - STANDARD AIR BLADE IONIZER STANDARD AIR BLADE IONIZER A Low Cost but powerful static eliminator that rapidly removes static charge and cleans The Standard Air Blade Ionizer combines the superior designed Standard Air Blade Air Knife the quality Haug static bars - the RN bar for most applications or the extra strong VS bars (Triple X versions) for very high static charges and extremely high speeds. The standard Air-Blade Air Knife uses slightly more compressed air than the Silent X-Stream Blade Air and has a higher sound level but still produces a powerful, and adjustable force with "laminar" flow to eliminate charges in applications where static bars cannot reach or where high speeds are a factor. Normally the Standard Model RN Haug brand static bar can address most applications. For extremely high speeds and high charges the extra powerful VS model is used. For wash down applications (such as pharmaceutical areas), a washable model is available at extra cost. (Contact factory for information) All Haug static bars come with a patented safety connector and fully shielded cable. The power supplies are "repairable" and are so well made, that we offer a two year warranty on them (one year on the bars). STANDARD AIR BLADE IONIZER FEATURES: Connections on the back or ends. It flows from end to end (full flow). Stainless steel models are available for high temperature and corrosive models. Models are designed for easy cleaning and prevention of dirt entering the static bar, minimizing potential damage. Patented connectors with the ground intrinsic to the cable design. Instant ON/OFF with no moving parts. Repairable Power Supply with a two year warranty. STANDARD AIR BLADE IONIZER BENEFITS: Flexible mounting options. Units can be mounted end to end for longer lengths with no air gap. High temperature, extra strength, and even a unique washable stainless steel model is available for special applications or as required. Ease of cleaning and maintenance. No separate ground connection that can be cut and cause sparks or accidentally shock personnel. Conserves air use when not required. Eliminates one costly area which is power supply replacement. 2 year warranty on. Three Model 1512 Standard Air Blade Ionizer with 'extra strong' model VS static bar is used to remove the static charge from containers moving at high speed prior to filling. The Ionized air is blown in to the container to remove the static charge. All the static bars will connect with 4 outlet power supply. The VS Bars have to be used because of the high speed of container sales@nexflow.com sales@nexflowair.com sales@nex-flow.com Web:

7 - STANDARD AIR BLADE IONIZER Electrical field strength kv/m Performance of Silent X-Stream Air Blade Ionizer with standard RN static bar With RN : 2.16 psig (1.4 bar) With RN : 1.8 psig (.7 bar) With RN : 4.32 psig (.3 bar) Time in milliseconds Electrical field strength kv/m Performance of Silent X-Stream Air Blade Ionizer with standard VS static bar Time in milliseconds With VS : 2.16 psig (1.4 bar) With VS : 1.8 psig (.7 bar) With VS : 4.32 psig (.3 bar) Nex Flow Air Products Corp. 152 Yonge Street, Unit 35B-22 Richmond Hill, ON, Canada, L4C 3C7 Tel: Fax: or

8 ( - STANDARD AIR BLADE IONIZER Qualitative Chart Comparing lon Blowers and Air Blade Dissipation of static charge with distance. Increasing Distance from Charged Target Air Blade Ionizer Ion Blower Increasing Time to Dissipate Charged Target lonizer PERFORMANCE AND RELIABILITY The standard RN static bar is very effective when mounted close to a surface (within an inch) at speeds up to 8 feet per minute and the strong VS bar can work to speeds up to 2 feet per minute mounted as close or at slower speeds up to 8 inches away. For greater distances and high speeds the addition of air is required. The laminar flow from an Air Blade Air Knife will extend the effectiveness over this extra distance. Even with laminar flow the ions will recombine and slow static dissipation slightly. For very highly charged surfaces and very high speeds, the extra strong VS static bar may be required. Apart from distance, the Air Blade Air Knife allows enough force for blowoff of dust and dirt with little required. Blowers can actually be more effective in static removal closer to the surfacebut the Air Blade lonizer is more effective when further away (see chart comparing blowers and Air Blade lonizers above).this is why we recommend stronger static bars like our VS static bar for blowers when far from the target. Blowers however do not offer adequate blowoff force to clean unless they have very high flow and high static pressure. But when not close to the target, blower systems will still require a stronger static bar to match the rate of dissipation that an Air Blade lonizer can offer. The Standard Air Blade lonizer can work well for dust and dirt blowoff within the range of 2 to 4 PSI (1.4 to 2.8 Bar) line pressure. (END FACES) 1/4" 18 (TPI)* NPT. 21 (8.mm).55" (14.5mm) 1.25" (32.mm) SIDE VIEW. 86 " (22.mm) 1. 2 (22.mm) 1. 2 MAX) (12.5mm) STANDARD AIR BLADE WITH IONIZER TOP VIEW (PLAN) M6 DOME -HD (STAINLESS STEEL) SCREWS (REAR FACE) 1/4" 18 (TPI)* NPT M8 MOUNTIN HOLES (REAR FACE) 1/4" 18 (TPI)* NPT A QA REAR VIEW For Air Knife Dimensions please refer page B15 (* BSP Threads or Adaptors can be supplied depending on country location) sales@nexflow.com sales@nexflowair.com sales@nex-flow.com Web:

9 - STANDARD AIR BLADE IONIZER STANDARD AIR BLADE IONIZERS PART NO DESCRIPTION One 3 Standard Air Blade c/w Model RN Static Bar One 6 Standard Air Blade c/w Model RN Static Bar One 12 Standard Air Blade c/w Model RN Static Bar One 18 Standard Air Blade c/w Model RN Static Bar One 24 Standard Air Blade c/w Model RN Static Bar One 3 Standard Air Blade c/w Model RN Static Bar One 36 Standard Air Blade c/w Model RN Static Bar 42 (One 24 & one 18 ) Standard Air Blade c/w Model RN Static Bar 48 (Two 24 ) Standard Air Blade c/w Model RN Static Bar 54 (One 24 & One 3 Standard Air Blade c/w Model RN Static Bar 6 (Two 3 Standard Air Blade c/w Model RN Static Bar 66 (One 3 & One 36 ) Standard Air Blade c/w Model RN Static Bar 72 (Two 36 ) Standard Air Blade c/w Model RN Static Bar 3 Standard Air Blade Ionizer plus ENC-2 Power Supply 6 Standard Air Blade Ionizer plus ENC-2 Power Supply 12 Standard Air Blade Ionizer plus ENC-2 Power Supply Standard Air Blade Ionizer plus ENC-2 Power Supply 24 Standard Air Blade Ionizer plus ENC-2 Power Supply 3 Standard Air Blade Ionizer plus ENC-2 Power Supply 36 Standard Air Blade Ionizer plus ENC-2 Power Supply 42 Standard Air Blade Ionizer plus ENC-2 Power Supply 48 Standard Air Blade Ionizer plus ENC-2 Power Supply 54 Standard Air Blade Ionizer plus ENC-2 Power Supply 6 Standard Air Blade Ionizer plus ENC-2 Power Supply 66 Standard Air Blade Ionizer plus ENC-2 Power Supply 72 Standard Air Blade Ionizer plus ENC-2 Power Supply Nex Flow Air Products Corp. 152 Yonge Street, Unit 35B-22 Richmond Hill, ON, Canada, L4C 3C7 Tel: Fax: or

10 - STANDARD AIR BLADE IONIZER SUPER TRIPLE STANDARD AIR BLADE IONIZERS PART NO. 166 DESCRIPTION One 6 Super Triple Standard Air Blade c/w Model VS Static Bar One 12 Super Triple Standard Air Blade c/w Model VS Static Bar One 18 Super Triple Standard Air Blade c/w Model VS Static Bar One 24 Super Triple Standard Air Blade c/w Model VS Static Bar One 3 Super Triple Standard Air Blade c/w Model VS Static Bar One 36 Super Triple Standard Air Blade c/w Model VS Static Bar 42 (One 24 & one 18 ) Super Triple Standard Air Blade c/w Model VS Static Bar 48 (Two 24 ) Super Triple Standard Air Blade c/w Model VS Static Bar 54 (One 24 & One 3 ) Super Triple Standard Air Blade c/w Model VS Static Bar 6 (Two 3 ) Super Triple Standard Air Blade c/w Model VS Static Bar 66 (One 3 & One 36 ) Super Triple Standard Air Blade c/w Model VS Static Bar 72 (Two 36 Super Triple Standard Air Blade c/w Model VS Static Bar 6 Super Triple Standard Air Blade Ionizer plus ENC-2 Power Supply 12 Super Triple Standard Air Blade Ionizer plus ENC-2 Power Supply 18 Super Triple Standard Air Blade Ionizer plus ENC-2 Power Supply 24 Super Triple Standard Air Blade Ionizer plus ENC-2 Power Supply 3 Super Triple Standard Air Blade Ionizer plus ENC-2 Power Supply 36 Super Triple Standard Air Blade Ionizer plus ENC-2 Power Supply 42 Super Triple Standard Air Blade Ionizer plus ENC-2 Power Supply 48 Super Triple Standard Air Blade Ionizer plus ENC-2 Power Supply 54 Super Triple Standard Air Blade Ionizer plus ENC-2 Power Supply 6 Super Triple Standard Air Blade Ionizer plus ENC-2 Power Supply 66 Super Triple Standard Air Blade Ionizer plus ENC-2 Power Supply 72 Super Triple Standard Air Blade Ionizer plus ENC-2 Power Supply X-Stream Air Blade Ionizer is used to neutralize A Model 15112X & clean surface dust of a circuit board. The ionizing bar is well designed and closely balanced in positive & negative ions produced meaning a close to zero residual charge after use unlike many competitive product sales@nexflow.com sales@nexflowair.com sales@nex-flow.com Web: