Landscape Drip Application Guide. A Practical Guide for Designing and Installing Drip Irrigation Systems

Transcription

1 Landscape Drip Application Guide A Practical Guide for Designing and Installing Drip Irrigation Systems

2 Table of Contents Rain Bird and Drip Irrigation 3 Anatomy of Xerigation 4 Product Guide Emission Devices Control Zones 1 Application Guide Narrow Planting Beds 1 Parking Lot 2 Parkways and Walkways 34 Pots/Baskets/Misc. 3 Slopes 44 Street Medians 50 Walls 5 Golf Courses 0 Trees Xeri-Bird 2 The Intelligent Use of Water

3 Featured Rain Bird Drip Products Benefits of Xerigation XPCN Series Nozzle For irrigating small areas with dense plantings, the XPCN Series Nozzle is the most precise and efficient nozzle available. With built-in pressure compensation and a unique square spraying pattern, the need for overlapping is greatly reduced. This means less overspray, overwatering and runoff than traditional nozzles. It also means you need less nozzles, dramatically reducing your costs and installation time. XF Series Dripline The XF Series Dripline is the most flexible, pressurecompensating inline emitter tubing available. Its unique material offers significantly greater flexibility, allowing tighter turns with fewer elbows for easier installation. The dual-layered tubing (brown over black) provides unmatched resistance to chemicals, UV damage and algae growth. Control Zone Kits Control your zone with preassembled, compact Rain Bird Control Zone Kits. Two components (valve and pressure regulating filter) are combined to create a shorter kit, when compared with the competition. This allows you to fit more control zone kits in a single valve box without cramping the work space inside the box, saving you time and money. The Efficiency of Drip, Engineered by Rain Bird The Rain Bird s low volume irrigation products were coined with the phrase Xerigation in the 1990 s and include drip irrigation and low volume spray products. The Rain Bird Xerigation system is the most efficient way to water landscapes. Over the last ten years, Rain Bird has been a leader in innovation advances that customers value. Earlier advances included the Xeri-Pop TM, the first efficient low volume spray with a spray head that retracts out of sight, the Self-Cleaning Back Flush Filter that reduces maintenance by automatically flushing out debris, and the PR Series Pressure Regulating Filter that combined the regulator and filter into one component reducing the potential for leaks. Today, Rain Bird continues the tradition of innovation with the XPCN Series Nozzle and the XF Series Dripline featured above. With the broadest product line, Rain Bird s Xerigation systems can be designed to meet any site requirement providing unmatched quality, efficient water use, and ease of installation. Design flexibility Elimination of overspray and runoff High water efficiency Water is delivered at or near the plant root zone Plants stay healthier and live longer It is Rain Bird s long-standing commitment to engineering and quality excellence that sets our drip irrigation products apart. Demonstrated Water Savings Inland Empire Utilities Agency (IEUA) Building - Chino, CA Solution: Rain Bird developed a complex irrigation system for the IEUA site, including Xerigation products. Results: 3% less water used than a comparable facility. First public agency building to ahieve a LEED Platinum Rating. The Intelligent Use of Water 3

4 Anatomy of a Xerigation / Lan Anatomy of of a a Xerigation / / La La Anatomy of Xerigation / Landscape Drip System Overview Water Source Water Water Source a 1b a 1a 1b 1b Control Zone Kit 5. Xeri-Black Stripe Tubing 11. Easy Fit Elbow Self-Piercing Barb 1a. Low Flow Valve. Xeri-Bug Emitter. Diffuser Bug Cap Connector Control Control Zone Zone Kit Kit Xeri-Black Stripe Stripe Tubing Tubing Easy Easy Fit Elbow Fit Elbow Self-Piercing Barb Ba 1b. Pressure 1. Control Regulating Zone Filter. 4 Kit Tubing Stake. Xeri-Bug 13. PC Emitter Emitter Diffuser 13. PC 1. XPCN Series Nozzle 1a. 1a. Low Low Flow Flow Valve Valve.. Xeri-Bug Emitter Emitter.. Diffuser Diffuser Bug Bug Cap Cap Connector Emitter Diffuser Cap 2. Easy Fit Female Adapter. 4 Distribution 1a. Low Flow Valve Tubing 14. PC Module Xeri-Pop 1b. 1b. Pressure Regulating Filter Filter Tubing 4 Tubing Stake Stake PC Emitter PC Emitter Diffuser Diffuser Cap Cap XPCN XPCN Series Series Nozzle. 1/4" Tubing Stake 14. PC Module Easy Fit Coupling 9. 4 Barb Tee. PolyFlex Riser Assembly 20. Xeri-Bubbler SPYK Easy Easy Fit Female Fit Female Adapter Adapter Distribution Tubing Tubing PC PC Module Xeri-Pop 4. Xeriman 1b. Pressure Regulating Filter. 1/4" Distribution Tubing. PolyFlex Riser Assembly Tool 10. Tie-Down Stake 21. Air 1. Xeri-Bug Emitter FPT Relief Valve Kit Easy Easy Fit Fit Coupling Barb 4 Barb Tee Tee.. PolyFlex PolyFlex Riser Riser Assembly Xeri-Bubbler SPYK SPYK Xeriman Easy Tool Fit Tool Female Adapter Tie-Down 9. Stake 1/4" Stake Barb Tee Xeri-Bug 1. Emitter Xeri-Bug Emitter FPT 1 2 Emitter FPT - 1/2" Air FPT Relief Air Relief Valve Valve Kit Kit 3. Easy Fit Coupling 10. Tie-Down Stake 1. 1/4" Self-Piercing Barb Connector 4. Xeriman Tool 5. Xeri-Black Stripe Tubing 11. Easy Fit Elbow. Diffuser Bug Cap 1. XPCN Series Nozzle 19. Xeri-Pop D49002 D49002 D

5 on n / Landscape / Landscape Drip Drip System System PRODUCTS NARROW BEDS PARKING LOT POTS/BASKETS SLOPES PVC PVC PVC STREET MEDIANS. 1 4 Self-Piercing Barb 22. SEB-X Emitter Valve Box 2. XPCN Series Nozzle Adapter Self-Piercing Barb 22. SEB-X Emitter Valve Box 1 4 Barb Connector Connector Barb 22. SEB-X Emitter Valve Box 2. XPCN 2. XPCN Series Series Nozzle Nozzle Adapter Adapter Connector 23. XF Dripline 29. Easy Fit Tee Barb 1 4 Connector Barb Connector 35. Multi-OutletXeri-Bug. XPCN Series 20. Xeri Nozzle - Bubbler 23. SPYK XF 23. Dripline XF Dripline 2. Outlet 29. Manifold Easy 29. Fit Easy Tee Fit Tee 34. 1/4" Barb Connector XPCN Series Nozzle 24. Tubing Cutter 30. Easy Fit Flush Cap 35. Multi-Outlet 35. Multi-OutletXeri-Bug 3. 1 Series Nozzle 24. Tubing Cutter 30. Easy Fit Flush Cap Xeri-Pop21. Air Relief Valve Kit 2. XPCN Series Nozzle Adapter 35. Multi-Outlet Landscape Dripline. Xeri-Pop 24. Tubing Cutter 30. Easy Fit Flush Cap Xeri-Bird 31. Purple Landscape Dripline Landscape Xeri-Bug Landscape Dripline - Dripline 1/2" FPT. Xeri-Bubbler 25. Xeri-Bird 31. Purple Landscape Dripline Xeri-Bubbler 22. SPYK SEB-X SPYK 25. Xeri-Bird 31. Purple Landscape Dripline Emitter Valve 2. Inline BoxPressure 29. Regulator Easy Fit Tee 32. Xeri-Bug Emitter SPYK 3. 1/4" Landscape Dripline. Air Relief Valve Kit 2. Inline 2. Pressure Inline Pressure Regulator Regulator 32. Xeri-Bug 32. Xeri-Bug Emitter Emitter Air Relief 23. Valve XF KitDripline 2. Outlet Manifold 2. Outlet Manifold 30. Easy Fit Flush 33. Cap 33. XT-00 Distribution Tubing lief Valve Kit 2. Outlet Manifold 33. XT-00 XT-00 Distribution Distribution Tubing Tubing 24. Tubing Cutter 31. Purple Landscape Dripline 25. Xeri-Bird 32. Xeri-Bug Emitter Inline Pressure Regulator 33. XT-00 Distribution Tubing inbird.com/drip ird.com/drip * NOTE: Not all products listed in the Product Guide section are in the diagram above WALLS GOLF COURSES TREES 5

6 Xeri-Bug Emitters Barb Inlet x Barb Outlet Point-source low-flow emitters for watering the root zones of plants, trees, and container plants. XB-05-PC (0.5 GPH) XB-10-PC (1.0 GPH) XB-20-PC (2.0 GPH) Installation Option 1 Using a Xeriman Tool, insert an emitter directly into ½ drip tubing or between dripline emitters as needed. Installation Option 2 For more precise water placement, use ¼ distribution tubing, a ¼ tubing stake, and a bug cap. Installation Option 3 25 Installation Option For precise water placement, a barbed connector can be punched into distribution tubing. The emitter is then placed at the end of the ¼ distribution tubing. NOTE: should the emitter become dislodged, unregulated flow will occur The Xeri-Bird provides a centralized location for up to eight emitters. A mix of Xeri-Bug and/ or PC emitters can be used to provide the flow rates needed for different plant materials. Tentacles of ¼ distribution tubing, ¼ tubing stakes, and bug caps allow for precise water placement. 2 Installation Option 5 The Outlet Manifold provides a centralized water distribution connection for up to six emission devices. Connect the ¼ distribution tubing to one of the outlets. Use a ¼ tubing stake to ensure precise water placement. The emitter is placed on the end of the 1/4 distribution tubing to regulate the water flow. NOTE: should the emitter become dislodged, unregulated flow will occur. FPO Meet Dave Dave, our drip design expert, has worked both as a specifier and an installer in the irrigation industry for more than 20 years. Throughout this application guide, he will provide installation tips, discuss common mistakes, and suggest additional products to save you time and heartache. Drip Tip When using an emitter at the end of the ¼ distribution tubing, should the emitter become dislodged (or the ¼ tubing gets cut) unregulated flow will occur.

7 rce 1a 1 1b Installation Option 1 31 erigation PolyFlex Riser for point-source / Landscape Drip System applications in high foot traffic areas Thread Anatomy Inlet of a x Xerigation Barb Outlet / Landscape Drip System ol Zone Kit 5. Xeri-Black Stripe Tubing ow Flow Valve. Xeri-Bug Emitter ressure Regulating Filter. 1 4 T u b i n g Stake it Female Adapter D i s t r i b u t i o n Tubing it Coupling B a r b Tee an Tool 10. Tie-Down Stake B a r b Connector 35. Multi-OutletXeri-Bug Landscape Dripline 1 33 Xeri-Bug Emitters 2 Point-source low-flow emitters for watering the root zones of plants, trees, and container plants bed could pull up a staked emitter or 2 otherwise 13 cause misalignment of the ¼ distribution tubing. If they stepped 11. Easy Fit Elbow stay. Diffuser 14 in place.) Bug Cap 13. PC Emitter Diffuser Cap 14. PC Module PolyFlex Riser Assembly 1. Xeri-Bug Emitter FPT (0.5 GPH) S e l f - P i e r c i n g Barb Connector 1. XPCN Series Nozzle 19. Xeri-Pop 20. Xeri-Bubbler SPYK 21. Air Relief Valve Kit 1 19 /drip PVC 22. SEB-X Emitter Valve Box 23. XF Dripline 24. Tubing Cutter 25. Xeri-Bird 2. Inline Pressure Regulator 2. Outlet Manifold XB-10PC XPCN Series Nozzle Adapter 29. Easy Fit Tee 30. Easy Fit Flush Cap 31. Purple Landscape Dripline 32. Xeri-Bug Emitter XT-00 Distribution Tubing 32 Installation 1 Option 2 2 location 2 for up to eight emitters. A mix B a r b Connector 35. Multi-OutletXeri-Bug Landscape Dripline 9 Anatomy 2 of a Xerigation / Landscape Drip System Use a threaded emitter with a Xeri-Bug Emitters (A pedestrian walking through a flower on a PolyFlex Riser, the emitter would ½ FPT Inlet x Barb Outlet Point-source low-flow emitters for watering the root zones of plants, trees, and container plants. XB-05PC (1.0 GPH) 3 XB-20PC-1032 (2.0 GPH) The Xeri-Bird provides a centralized of Xeri-Bug and/ or PC emitters can be used to provide the flow rates needed for different plant materials. Tentacles of ¼ distribution tubing, ¼ tubing stakes, and bug caps allow for precise water placement. 9 PRODUCTS NARROW BEDS PARKING LOT POTS/BASKETS SLOPES 29 r Cap 29 mbly 1 2 FPT Water Source a b S e l f - P i e r c i n g Barb Connector 1. XPCN Series Nozzle 19. Xeri-Pop Xeri-Bubbler SPYK Air Relief Valve Kit 1. Control Zone Kit 1a. Low Flow Valve 1b. Pressure Regulating Filter 2. Easy Fit Female Adapter 3. Easy Fit Coupling 4. Xeriman Tool Installation Option 35 1 flow to plant 4 material Xeri-Black Stripe Tubing. Xeri-Bug Emitter 1 4 T u b i n g Stake 1 4 D i s t r i b u t i o n Tubing 1 4 B a r b Tee 10. Tie-Down Stake 9 5 Use the ½ FPT inlet emitter connected to a PVC schedule 0 riser to regulate PVC 22. SEB-X Emitter Valve Box 23. XF Dripline 11. Easy Fit Elbow 24. Tubing Cutter. Diffuser Bug Cap 25. Xeri-Bird 14. PC Module Inline Pressure Regulator 2. Outlet Manifold PC Emitter Diffuser Cap 29. PolyFlex Riser Assembly 1. Xeri-Bug Emitter FPT XBT-10 XBT (1.0 GPH) 29 (2.0 GPH) XPCN Series Nozzle Adapter 29. Easy Fit Tee S e l f - P i e r c i n g Barb 30. Easy Connector Fit Flush Cap 1. XPCN Series Nozzle 31. Purple Landscape Dripline 19. Xeri-Pop Xeri-Bug Xeri-Bubbler Emitter SPYK XT-00 Air Relief Valve Distribution Kit Tubing 2 25 Installation Option 2 For more precise water placement, use ¼ distribution tubing, 2 a ¼ tubing 35 stake, and a bug cap. PVC 22. SEB-X Emitter Valve Box 23. XF Dripline 24. Tubing Cutter 25. Xeri-Bird 2. Inline Pressure Regulator 2. Outlet Manifold B a r b Connector 35. Multi-OutletXeri-Bug Landscape 29. Easy Dripline Fit Tee 2. XPCN Series Nozzle Adapter 30. Easy Fit Flush Cap 31. Purple Landscape Dripline 32. Xeri-Bug Emitter XT-00 Distribution Tubing 2 1 STREET MEDIANS 2 WALLS GOLF COURSES B a r b Connector 35. Multi-OutletXeri-Bug Landscape Dripline TREES 1 D49002 /drip /drip

8 Multi-Outlet Xeri-Bug Barb Inlet x Barb Outlet Six outlet emitter with built-in pressure compensation. Use for watering the root zones of plants, trees, and container plants. XB-05- (0.5 GPH) XB-10- (1.0 GPH) XB-20- (2.0 GPH) Installation Option 1 The Multi-Outlet Xeri-Bug provides centralized water distribution for up to six plants. All six outlets have the same flow rate. Connect the ¼ distribution tubing to one of the outlets. Use a ¼ tubing stake to ensure precise water placement. Insert a bug cap at the end of the tubing. ion / Landscape Drip System * 13 Multi-Outlet 14 Xeri-Bug 19 1/2" FPT inlet Barb x Barb Outlet Six outlet emitter with built-in 2 pressure compensation. Use for 1 watering the root zones of plants, trees, and container plants XBT-05- (0.5 GPH) 3 XBT-10- (1.0 GPH) XBT-20- (2.0 GPH) Installation Option 1 The Multi-Outlet Xeri-Bug can be mounted on a ½ schedule 0 riser to connect to PVC. It provides 2 centralized water distribution for up to six plants. All six outlets have the same flow rate. Connect the ¼" distribution tubing to one of the outlets. Use a ¼ tubing stake to ensure precise water placement. PVC Insert a bug cap at the end of the tubing * Installation Option 2 Using an Easy Fit Tee and Male Adapter, the Multi-Outlet Xeri-Bug can be attached to ½ drip tubing. It provides centralized water distribution for up to six plants. All six outlets have the same flow rate. Connect the ¼" distribution tubing to one of the outlets. Use a ¼ tubing stake to ensure precise water placement. Insert a bug cap at the end of the tubing S e l f - P i e r c i n g Barb Connector 1. XPCN Series Nozzle 19. Xeri-Pop 20. Xeri-Bubbler SPYK 21. Air Relief Valve Kit 22. SEB-X Emitter Valve Box 23. XF Dripline 24. Tubing Cutter 25. Xeri-Bird 2. Inline Pressure Regulator 2. Outlet Manifold 2. XPCN Series Nozzle Adapter 29. Easy Fit Tee 30. Easy Fit Flush Cap 31. Purple Landscape Dripline 32. Xeri-Bug Emitter XT-00 Distribution Tubing B a r b Connector 35. Multi-OutletXeri-Bug Landscape Dripline ainbird.com/drip

9 Outlet Manifold EMT-XERI ½ FPT Inlet Six outlet emitter without pressure compensation. For use with Xeri-Bug or PC Module emitters, Xeri-Pops, bubblers, and micro-sprays. PRODUCTS 2 Installation Option 1 The Outlet Manifold provides a centralized water distribution connection for up to six emission devices. Connect ¼" distribution tubing to one of the outlets. Use a ¼ tubing stake to ensure precise water placement. The emitter is placed on the end of the ¼" distribution tubing to regulate the water flow. EMT-XERI Installation Option 2 To incorporate spray heads into your drip system, connect the Xeri-Pop Micro-Spray to a multi-outlet manifold (EMT-Xeri) via ¼ distribution tubing. NARROW BEDS PARKING LOT dscape Drip System Xeri-Bird Multi-Outlet Emission Device ½ FPT Inlet x Barb Outlet The most flexible multi-outlet device. 1 Contains eight ports that accept 34 Xeri-Bug emitters or PC Modules for independent flows from 0.5 to 24gph. Installation Option 3 To incorporate bubblers or microsprays into your drip system, connect the needed product to a multi-outlet manifold (EMT-Xeri) via ¼ distribution tubing Dave's Drip Tip Be concious of your run times and application rates. FPOMixing products connected to the EMT-Xeri can lead to over or under watering. XBD-0 WALLS STREET MEDIANS SLOPES POTS/BASKETS 35 PVC 25 2 Installation Option 1 The Xeri-Bird provides a centralized location for up to eight emitters. A mix 2 of Xeri-Bug emitters and/ or PC Modules can be used to provide the flow rates needed for different plant materials. Tentacles of ¼" distribution tubing, ¼ tubing stakes, and bug caps allow for precise water placement NOTE: Always install the emitters with the pointed or threaded end UP. GOLF COURSES TREES 22. SEB-X Emitter Valve Box 23. XF Dripline 24. Tubing Cutter 25. Xeri-Bird 2. XPCN Series Nozzle Adapter 29. Easy Fit Tee 35. Multi-OutletXeri-Bug Easy Fit Flush Cap 31. Purple Landscape Dripline B a r b Connector Landscape Dripline

10 Pressure-Compensating Modules x Barb Outlet 11 BarbInlet Point-source medium-flow emitters for watering larger 9 trees. shrubs and PC-05 (5 GPH) 33 PC-0 ( GPH) PC-10 (10 GPH) Anatomy of a Xerigation / Landscape Drip System 31 rigation / Landscape Drip System PC- ( GPH) 25 PC-1 (1 GPH) Installation Option / nal csd epa ird Sp tsy me * irex tag noi XPCN S E e 30. asy Fit ries N ozz E T le A 31. asy Fit ee dap Pur F lu ter sh C 32. ple L a X 33. eri-bu andsca p XT- g Em pe D 00 D itte ripli ne istrib r - 10 utio 32 n Tu bin g Barb M C 3. 1 ulti-o onnec u to 4 L and tlet Xe r scap ri-bu g ed ripli ne Self-Piercing Barb Easy Fit Elbow Connector Diffuser Bug Cap 1 1. XPCN Series Nozzle PC2Emitter Diffuser Cap 2 Installation Option Xeri-Pop PC Module Xeri-Bubbler SPYK PolyFlex Riser Assembly 2 2 Manifold Air Reliefprovides Valve Kit a Xeri-Bug Emitter The FPT Outlet ae F ys.21 le ti id wob resuff P.31 EC gub 1 pac rettim CP.4.51 om ffid resu -elud ylop pac 2301 ir xelf ex.1 res gub-ir ssa E PVC /drip E. asy Fit D E 13. iffuse lbow PC E r Bug 14. m PC M itter Cap. odu Diffu P 1. olyfle le-10 ser Cap 3 x Xer i-bu Riser A 2 g Em ss itte 1embly r - 2 FP T 4 3 1b trip et tter ubing e ubin g C Self 1. onnec -Piercin t X g Ba 19. PCN S or rb e X 20. eri-po ries No p Xer zzle i-bu 21. b Air Reli bler S P ef V alve YK Kit D etaw os r ecru a Distribution33. Tubing XT-00 Distribution Tubing b noc lort a1. noz tik e lf wol.b1 o.2 Vw E serp evla R erus tif ysa.3 e lug lamef if ysae.4 t e nita if g tpada ilpuoc mirex retl re gn oot na l ww.rainbird.com/drip.s 23. EB-X ww XF D Emit 2 ter V ripli 4. w.r T alve 25. ubing ne Box ain C X 2. eri-bir utter bird d 2. Inline P r e Out s.co let M sure R anif egula m/d old tor rip irex. calb ts k ub-irex 1. epir g but ettime ibut 4 1. gni n r D 4 ts g 9 eka ubirtsi 41. noit et brab it.01 e but -e gni wod ts n eka fa PVC SEB-X Emitter Valve Box XF Dripline Tubing Cutter Xeri-Bird Inline Pressure Regulator Outlet Manifold centralized PVC water distribution connection forup to six emission ¼" distribution devices. Connect Self-Piercing Barb 22. SEB-X Emitter ValvetoBox 2. XPCN Series tubing one of the outlets. Use a ¼ Nozzle Adapter Connector Easy Fitwater Tee 23. XF Dripline tubing stake to ensure29.precise 1. XPCN Series Nozzle 30. Easy Fit Flush 24. Tubing Cutter placement. The PC Module with a PC Cap 19. Xeri-Pop PVC Landscape 25. Xeri-Bird Diffuser Cap is placed31. on Purple the end of the Dripline 20. Xeri-Bubbler SPYK VC Xeri-Bug Emitter 2. Inline Pressure ¼" Regulator distribution tubing32. to regulate the Air Relief Valve Kit 2. Outlet Manifold 33. XT-00 Distribution Tubing T water flow. NOTE: should the emitter Box 2. XPCN Series Nozzle Adapter Barb Connector become dislodged, unregulated flow 29. Easy Fit Tee Nozzle 35. 1Multi-Outlet Xeri-Bug Box N Series Nozzle2. Adapter XPCN Series 34. 1Adapter 4 Barb Connector Barb Connector will occur Easy Easy Fit FitTee Flush Cap 4 LandscapeXeri-Bug 3. Multi-Outlet Dripline Fit Tee Multi-Outlet Xeri-Bug Easy Purple 1 Fit Flush Cap 30. FitLandscape Flush Cap 4 Landscape Dripline 3. Dripline Landscape Dripline 32. Purple Xeri-Bug Emitter - Dripline 1032 ator le Landscape Dripline 31. Landscape 33. Xeri-Bug XT-00 Distribution Tubing Bug Emitter Emitter ator SEB-X Emitter Valve Box 2. XPCN Series Nozzle Adapter 29. Easy Fit Tee XF Dripline Easy Fit Flush Cap Tubing Cutter Purple1Landscape Dripline Xeri-Bird Installation Option Xeri-Bug Emitter Inline Pressure Regulator Outlet ManifoldThe Xeri-Bird provides 33. XT-00 Distribution Tubing a centralized 33 3 Dri ps yst em na ota ym fles C / La nds cap e a fo Xeri-Black Stripe Tubing 25 Xeri-Bug Emitter Tubing Stake * 1 4 Distribution Tubing 1 4 Barb Tee Tie-Down Stake /drip 21 1 connector can be punched into ½ drip tubing. The PC Module with a PC 1 at the end Diffuser3 Cap is then placed of the ¼" 3 distribution tubing. NOTE: should the emitter become dislodged, unregulated flow 2 30 will occur Xer iga tion For more precise water placement, use 9 ¼ distribution tubing, a ¼ tubing stake, and a bug cap. PVC * Installation Option Self-Piercing Barb 11. 2Easy Fit Elbow Connector. Diffuser Bug Cap 1 34 Nozzle 1. XPCN Series 13. PC Diffuser Cap 13 Emitter Xeri-Pop *14. PC Module-1032 Installation Option 20. 3Xeri-Bubbler SPYK 29. PolyFlex Riser Assembly aair Relief Valve Kit 31-2 FPT 1. Xeri-Bug Emitter For precise water placement, barbed Xeri-Black Stripe Tubing Xeri-Bug Emitter Tubing Stake Distribution Tubing 1 4 Barb Tee Tie-Down Stake p System System m p Using a Xeriman Tool, insert the PC Module directly into ½ 2 drip tubing 19 or between dripline emitters as 34 needed. Use a PC Diffuser Cap to 29 eliminate squirting PC-24 (24 GPH) 2 emitters. A mix location for up to eight of Xeri-Bug emitters and/ or PC 32 Modules can be used to provide the flow rates needed for different plant materials. Tentacles of ¼" distribution tubing, ¼ tubing stakes, and bug caps allow for precise water placement. 2.XPCN Series Nozzle Adapter 29. Easy Fit Tee 30. Easy Fit Flush Cap 31. Purple Landscape Dripline 32. Xeri-Bug Emitter XT-00 Distribution Tubing Barb Connector 35. Multi-Outlet Xeri-Bug Landscape Dripline Barb Connector 35. Multi-Outlet Xeri-Bug Landscape Dripline Dave's Drip Tip When using an emitter at the end of the ¼ distribution FPOtubing, should the emitter become dislodged (or the ¼ tubing gets cut) unregulated flow will occur.

11 Pressure-Compensating Modules Thread Inlet x Barb Outlet Point-source medium-flow emitters for watering larger shrubs and trees. PRODUCTS Landscape Drip System PC (5 GPH) PC ( GPH) PC (10 GPH) NARROW BEDS Installation Option 1 1 Use a threaded emitter with a PolyFlex Riser for point-source 19 applications in high foot traffic areas. (A pedestrian walking through a flower bed could pull up a staked emitter or otherwise cause misalignment of the ¼" distribution tubing. If they stepped on a PolyFlex Riser, the emitter would stay in place.) Installation Option 2 The Xeri-Bird provides a centralized location for up to eight emitters. A mix of Xeri-Bug emitters and/ or PC Modules can be used to provide the flow rates needed for different plant materials. Tentacles of ¼" distribution tubing, ¼ tubing stakes, and bug caps allow for precise water placement. PARKING LOT 1 PC Diffuser Use a PC Diffuser cap to eliminate squirting water when using a PC Module staked at the end of a 1/4 distribution tubing or on a PolyFlex Riser. Landscape Drip System Installation Option 1 Use a PC Diffuser Cap to eliminate 19 squirting 35 water when using a PC Module staked at the end of ¼ distribution tubing or on a PolyFlex Riser PC-DIFF-PPL (Purple to designate non-potable water) PC Diffuser (Black) 32 WALLS STREET MEDIANS SLOPES POTS/BASKETS 2 1 PVC GOLF COURSES rcing Barb 22. SEB-X Emitter Valve Box 2. XPCN Series Nozzle Adapter Barb 33 Connector XF Dripline 29. Easy Fit Tee 35. Multi-OutletXeri-Bug s Nozzle 24. Tubing Cutter 30. Easy Fit Flush Cap Landscape Dripline 25. Xeri-Bird 31. Purple Landscape Dripline er SPYK 2. Inline Pressure Regulator 32. Xeri-Bug Emitter alve Kit 2. Outlet Manifold 33. XT-00 Distribution Tubing TREES

12 Diffuser Bug Cap Prevents bugs and other debris from clogging 1/4 distribution tubing. DBC-025 DBC-025-PPL Installation Option 1 Use a Diffuser Bug Cap at the end of ¼ distribution tubing to prevent clogging caused by bugs and other debris. Xeri-Pop Micro-Spray ½ FPT Inlet x Barb Outlet Pop-up spray for low-volume irrigation. Ideal for flower beds and vandal-prone areas. XBT-400X (4 inch pop-up) XBT-00X ( inch pop-up) XBT-00X ( inch pop-up) 1 Installation Option 1 1 Installation Option The Xeri-Pop Micro-Spray allows you to incorporate spray heads into your drip system. Connect the Xeri-Pop Micro-Spray to ½ drip tubing via ¼ distribution tubing and a barb connector Connect the Xeri-Pop Micro-Spray to a multi-outlet manifold (EMT-Xeri) via ¼ distribution tubing. Dave's Drip Tip FPO XPCN Series, 5 Series MPR, 5 Series Plastic Bubblers, and Series MPR (H, T, and Q) nozzles can be installed on a Xeri-Pop Micro-Spay.

13 XPCN Series Nozzles The most precise and efficient, low-volume spray solution for irrigation of small areas with dense plantings. PRODUCTS 1 Installation Option 1 The XPCN can be connected to PE or PVC via a PolyFlex Riser via the XPCN ADP adapter. The XPCN ADP is the XPCN ADP adapter preassembled to a PolyFlex Riser. The XPCN ADP24 is the XPCN ADP adapter preassembled to a 24 polyfelx riser. XPCN QTR (Purple) Quarter Pattern XPCN HLF (Brown) Half Pattern XPCN FUL (Red) Full Pattern Installation Option 2 The XPCN can be installed on a Xeri-Pop Spray Head. The Xeri-Pop can be connected to PE or PVC. The Xeri-Pop can also be connected to ½ drip or drip line tubing via ¼ tubing and a barb connector. NOTE: Use one of these configurations in each watering zone to provide a pop-up run indicator for your drip system. NARROW BEDS PARKING LOT * 1 Installation Option 3 The XPCN can be installed on a Rain Bird 100 Series Spray Head. * 1 Installation Option 4 The XPCN can be attached to a schedule 0 PVC or PE riser using a PA-S Plastic Shrub Adapter. Dave's Drip Tip FPO With a simple turn of the nozzle to the next preset stop, the XPCN Series Nozzle adjusts from a 2.5 foot throw to a 4 foot throw. TREES GOLF COURSES POTS/BASKETS SLOPES STREET MEDIANS WALLS 13

14 Xeri-Bubblers Spike Emission device with adjustable flow and radius. Ideal for shrub plantings, trees, containers, and flower beds. f a Xerigation / Landscape Drip System f a Xerigation / Landscape SXB-10-SPYK Drip System SXB-30-SPYK UXB-30-SPYK Installation Option 1 The Xeri-Bubbler Spike combines a 2 bubbler with a ¼ tubing stake for 20 precise water placement. Simply 9 connect the Xeri-Bubbler 2 Spike to ½ drip tubing via a barb connector. 34 NOTE: The Xeri-Bubbler Spike comes 1 with its own barb connector Installation Option 2 Connect up to six Xeri-Bubbler Spikes via ¼ distribution tubing to a multi-outlet manifold (EMT-Xeri) Xeri-Bubblers Barb Emission 31 device with adjustable flow and radius. Ideal for shrub plantings, trees, containers, and flower beds SXB SXB UXB Fit Elbow ser Bug Cap mitter Diffuser Cap odule-1032 Flex Riser Assembly 34 -Bug Emitter FPT 2 * Installation Option 1 PVC A barbed connector can be punched into distribution tubing. The Xeri S e l f l f - Pi e r c i i n g Barb Bubbler is then placed 22. SEB-X at the Emitter end of Valve the Box Connector ¼" distribution tubing. 23. XF Dripline 1. XPCN Series Nozzle NOTE: should the 24. bubbler Tubing become Cutter 19. Xeri-Pop dislodged, unregulated 25. Xeri-Bird flow will occur. 20. Xeri-Bubbler SPYK 2. Inline Pressure Regulator 21. Air Relief Valve Kit 2. Outlet Manifold * Installation Option 2 2 Connect up to six Xeri-Bubblers via ¼ distribution tubing to a multi-outlet 2. XPCN Series Nozzle Adapter manifold (EMT-Xeri) B Use a r b Connector a ¼ tubing 29. Easy Fit Tee 30. Easy Fit Flush Cap stake for precise 35. watering. Multi-Outlet Xeri-Bug NOTE: should 3. the 1 bubbler 1 4 Landscape become Dripline 31. Purple Landscape Dripline dislodged, unregulated flow will occur. 32. Xeri-Bug Emitter XT-00 Distribution Tubing /drip 14

15 Xeri-Bubblers Thread Emission device with adjustable flow and radius. Ideal for shrub plantings, trees, containers, and flower beds. PRODUCTS SXB Half Circle Stream Bubbler SXB Full Circle Stream Bubbler UXB Full Circle Umbrella Bubbler NARROW BEDS B * Installation Option 1 Use a threaded bubbler with a PolyFlex Riser for point-source applications in high foot traffic areas. (A pedestrian walking through a flower bed could pull up a staked bubbler or otherwise cause misalignment of the ¼" distribution tubing. If they stepped on a PolyFlex Riser, the bubbler would stay in place.) PARKING LOT Xeri-Sprays and Misters Thread Sprays and misters with adjustable flow and radius. Ideal for ground cover, mass plantings, annual flower beds, and containers. XS-090 Quarter Circle Spray XS-10 Half Circle Spray XS-30 Full Circle Spray X-30 ADJMST Full Circle Adjustment Mister * Installation Option 1 Use a threaded spray or mister with a PolyFlex Riser for point-source applications. Threaded emission devices on PolyFlex Risers are great for high foot traffic areas. TREES POTS/BASKETS SLOPES STREET MEDIANS GOLF COURSES WALLS

16 Xeri-Spray 30 True Spray Spike True micro-spray with full-circle fan spray pattern. Ideal for ground cover, mass plantings, annual flower beds, and containers. XS-30TS-SPYK * D Installation Option 1 rigation * D * / Landscape Drip System D* The Xeri-Spray 30 True Spray Spike combines a spray head with a ¼ 13 tubing stake for precise water placement. Simply connect 1 the 3 Xeri-Spray 30 True Spray Spike to ½ drip tubing via a barb connector. 19 NOTE: 20 The Xeri-Spray 30 True Spray Spike comes with its own barb connector Installation Option 2 Connect up to six Xeri-Spray 30 True Spray Spikes via ¼ distribution tubing to a multi-outlet manifold (EMT-Xeri). 9 2 Xeri-Spray 30 True Spray Barb or Thread True micro-spray with full-circle fan spray pattern. Ideal for ground cover, mass plantings, annual flower beds, and containers E E * * Installation Option 1 A barbed connector can be punched 2 into ½ drip tubing. The Xeri-Bubbler is then placed 35 at the end of the ¼" distribution tubing. NOTE: should the bubbler become dislodged, unregulated flow will occur. 25 XS-30TS XS-30TS Installation Option 2 Connect up to six Xeri-Bubblers via ¼ distribution tubing to a multi-outlet manifold (EMT-Xeri). Use a ¼ tubing stake for precise watering. NOTE: should the bubbler become dislodged, unregulated flow will occur PVC ap bly FPT S e l f - P i e r c i n g Barb Connector F * 1. XPCN Series Nozzle 19. Xeri-Pop 20. Xeri-Bubbler SPYK 21. Air Relief Valve Kit ww.rainbird.com/drip 22. SEB-X Emitter Valve Box 2. XPCN Series Nozzle Adapter 23. XF Installation Dripline Option Easy Fit Tee 24. Tubing Cutter 30. Easy Fit Flush Cap 25. Use Xeri-Bird a threaded bubbler with a 31. Purple Landscape Dripline 2. PolyFlex Inline Pressure Riser for Regulator point-source applications 32. Xeri-Bug Emitter in high Outlet foot Manifold traffic areas. (A pedestrian 33. XT-00 Distribution Tubing walking through a flower bed could pull up a staked bubbler or otherwise cause misalignment of the ¼" distribution tubing. If they stepped on a PolyFlex Riser, the bubbler would stay in place.) B a r b Connector 35. Multi-OutletXeri-Bug Landscape Dripline 1

17 Control Zone Kit Pyramid Selection Guide This easy-to-use selection tool is available at /drip/products/control and will help identify the most appropriate Control Zone Kit for the application. The selection guide uses an interactive format and asks four questions about the application; each time narrowing down the choices to identify the best one. Once the best kit is identified, the detailed specification information is easily found via point and click. TREES GOLF COURSES WALLS STREET MEDIANS PRODUCTS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS 1

18 Narrow Planting Bed Next To a Structure Sparse Applications Solution Xeri-Bird & Xeri-Bug Emitters on a PVC Lateral Advantages Up to 0% water savings No overspray damage to structures, fences or windows Targeted watering reduces weed growth Manifold design allows for increase/decrease in future plant water demands Installation XBD-0 XB XX* PRS-050 PT-025 TS-025 PVC Misc DBC-025 SEBX * Select appropriate emitter flow Xeri-Bird Outlet Manifold Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) In-stem 30 psi Pressure Regulator 1/4 Distribution Tubing 1/4 Tubing Stake PVC Laterals, Fittings, Glue Diffuser Bug Cap Emitter Box (optional) XBD-0 PRS-050 XB XX TO DO LIST : Trench, cut and glue PVC laterals. Connect lines to water source. Thread Xeri-Bird Outlet Manifold onto in-stem 30 psi Pressure Regulator, then connect to PVC tee. Attach 1/4 distribution tubing to outlets on Xeri-Bird Outlet Manifold. Run 1/4 lines to sparse plantings, stake in place with a Diffuser Bug Cap on the end. Install the desired Xeri-Bug Emitter inside Xeri-Bird Outlet Manifold. Use an SEBX Emitter Box as added protection for the Xeri-Bird. (optional) TIME: (approx.) 1 hr/20' 1 hr 5 min/assembly 3 min/xeri-bird min/stake 2 min INSTALLATION AND MAINTENANCE TIPS : Flush the zone after installation and 2-4 times per year. Install XB Emitters in Xeri-Bird Outlet Manifold with self-piercing barb or 1032 thread end up. Adjust watering time as seasons/weather changes. Leave slack in 1/4 tubing in case of unexpected maintenance. 1

19 BUILDING TUBING STAKE W/CAP PVC LATERAL WATER SOURCE XBD-0 TREES WALLS SLOPES POTS/BASKETS PRODUCTS NARROW BEDS PARKING LOT STREET MEDIANS GOLF COURSES 19

20 Narrow Planting Bed Next To a Structure Dense Applications Solution XF Series Dripline Grid Advantages Up to 0% water savings due to zero wind loss No runoff = reduced liability in high traffic areas No overspray damage to structures, fences or windows XF Dripline is easy to install, resulting in labor savings Installation XFD-0- XCZ-100-PRF AR Valve Kit MDCF Series OR XFD Series TDS-050 XF Series Dripline. " Spacing 1" Xeri Control Zone Kit Air Relief Valve Kit Easy Fit Compression Fittings/Adapters XF Dripline 1mm Insert Fittings Tie Down Stake AR VALVE KIT MDCF FITTINGS TO DO LIST : Assemble Control Zone Kit and connect to water source. Cut lengths of XF Dripline to build grid in planting area. Connect lengths of XF Dripline to Easy Fit Fittings (or XF Dripline Fittings) to create grid. Add Air Relief Valve kit to the zone. Connect Easy Fit Adapter to Easy Fit Tee for connection to Control Zone Kit. Stake XF Dripline grid in place and flush until clean water flows. Install planting material. TIME: (approx.) 1hr 10min/50' 25 min/50' 5 min 5 min/50' INSTALLATION AND MAINTENANCE TIPS : Flush the zone after installation and 2-4 times per year. Install AR Valve Kit at high point in the system. Leave XF Dripline coil in the sun while preparing for installation. 20

21 WATER SOURCE W/ XCZ-100-PRF MDCF FITTINGS or XFD FITTINGS PRODUCTS TIE DOWN STAKES BUILDING XF DRIPLINE AIR RELIEF VALVE TREES WALLS SLOPES NARROW BEDS PARKING LOT POTS/BASKETS STREET MEDIANS GOLF COURSES 21

22 Narrow Planting Bed Next To a Structure Dense Applications Solution XPCN Series Nozzle Advantages Precise square wetting pattern reducing overspray, overwatering, and runoff Up to 5% water savings due to efficient control of water placement with pressure compensation Adjustable radius in one unit makes design and installation simple Highest distribution uniformity in the industry for short radius nozzles Installation XPCN XXX* PA-S OR XPCN ADP PFR-FRA PVC Misc XPCN Series Nozzles Plastic Shrub Adapter for use with Schedule 0 Risers XPCN PolyFlex Riser Adapter for use with PFR-FRA PolyFlex Risers PolyFlex Riser with ½ Male Threaded Base Adapter PVC Laterals, Fittings, Glue * Half, full, or quarter nozzles as needed for planting bed XPCN NOZZLES TO DO LIST : Trench, cut and glue PVC laterals. Connect lines to water source. Thread in Schedule 0 riser, attach PA-S Adapter and XPCN Series Nozzle. OR Thread in PFR-FRA PolyFlex Riser into PVC tee, attach XPCN ADP Adapater and XPCN Series nozzle. TIME: (approx.) 1 hr / 20 1 hr 5 min / Assembly 5 min / Assembly INSTALLATION AND MAINTENANCE TIPS : Flush the zone after installation and 2-4 times per year. Adjust watering time as seasons/weather changes. Ensure that all XPCN Series Nozzles are adjusted to the appropriate throw distance. Dave's Drip Tip All XPCN Series Nozzles in the same zone should be FPOadjusted to either 2.5' or 4' throw. DO NOT mix throw settings in the same zone. 22

23 BUILDING PVC LATERAL 2.5 NARROW BEDS XPCN NOZZLE ON SCHEDULE 0 RISER or POLYFLEX RISER TREES GOLF COURSES WALLS STREET MEDIANS POTS/BASKETS SLOPES PARKING LOT PRODUCTS 23

24 Narrow Beds Raised Beds Solution XF Series Dripline Grid Advantages Up to 0% water savings due to zero wind loss Targeted watering helps reduce erosion of wall No runoff = reduced liability in high traffic areas XF Dripline is easy to install, resulting in labor savings Installation XFD-0- XCZ-100-PRF AR Valve Kit MDCF Series OR XFD Series TDS-050 XF Series Dripline. Spacing 1 Xeri Control Zone Kit Air Relief Valve Kit Easy Fit Compression Fittings/Adapters XF Dripline 1mm Insert Fittings Tie Down Stake MDCF FITTINGS XFD TO DO LIST : Assemble Control Zone Kit and connect to water source. Cut lengths of XF Series Dripline to build grid in crib wall. Connect lengths of XF Series Dripline to Easy Fit Fittings (or XF Dripline fittings) to create grid. Add Air Relief Valve Kit to the zone. Connect to Control Zone Kit. Stake XF Series Dripline grid in place and flush until clean water flows. Install planting material. TIME: (approx.) 1 hr 10 min/50 30 min/50 5 min/10 INSTALLATION AND MAINTENANCE TIPS : Flush the zone upon installation and 2-4 times per year. Install Air Relief Valve Kit at high point in the system. Leave XF Series Dripline coil in the sun while preparing for installation. Break up watering cycles to avoid run off or pooling of water in blocks. 24

25 MDCF FITTINGS or XFD FITTINGS XF SERIES DRIPLINE WATER SOURCE TIE DOWN STAKES TREES WALLS SLOPES POTS/BASKETS STREET MEDIANS GOLF COURSES PARKING LOT NARROW BEDS PRODUCTS 25

26 Narrow Planting Bed Next To a Structure Combination Applications Solution XF Series Dripline Grid with Xeri-Bug Emitters Advantages Up to 0% water savings due to zero wind loss XF Series Dripline is easy to install for labor savings No overspray damage to structures, fences or windows Installation XFD-0- XCZ-05-PRF MDCF Series OR XFD Series TDS-050 XB XX* PT-025 TS-025 DCB-025 * Select appropriate emitter flow rate XF Series Dripline. Spacing 3/4 Xeri Control Zone Kit Easy Fit Compression Fittings/Adapters XF Dripline 1mm Insert Fittings Tie Down Stake Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) 1/4 Distribution Tubing 1/4 Tubing Stake Diffuser Bug Cap XFD XM TOOL XB XX TO DO LIST : Assemble Control Zone Kit and connect to water source. Cut lengths of XF Series Dripline to build grid in planting area. Connect lengths of XF Series Dripline to Easy Fit Fittings (or XF Dripline fittings) to create grid. Connect Easy Fit Adapter to Easy Fit Tee for connection to Control Zone Kit. Stake XF Series Dripline grid in place. Punch self-piercing barb inlet of Xeri-Bug Emitters into XF Series Dripline, connect 1/4 tubing to barb outlet and run 1/4 tubing to larger plant. Stake tubing in place and attach Diffuser Bug Cap on the end. Flush system until clean water flows. Install planting material. TIME: (approx.) 1 hr 10 min/50 20 min/50 5 min 5 min/10 min/emitter 3 min/stake 2 min INSTALLATION AND MAINTENANCE TIPS : Supplemental Xeri-Bug Emitters are placed next to larger plants with higher water requirements. Flush the zone upon installation and 2-4 times per year. Install Xeri-Bug Emitters with the Xeriman Tool (XM Tool) for 50% faster installation. Leave XF Series Dripline coil in the sun while preparing for installation. 2

27 WATER SOURCE PRODUCTS XB EMITTER NARROW BEDS PARKING LOT BUILDING XF SERIES DRIPLINE TUBING STAKE W/CAP SLOPES POTS/BASKETS TIE DOWN STAKES STREET MEDIANS TREES GOLF COURSES WALLS AIR RELIEF VALVE MDCF FITTINGS or XFD FITTINGS 2

28 Narrow Planting Bed/Divider Sparse Applications Solution PolyFlex Riser/Adapter with Xeri-Bug Drip Emitters on a PVC Lateral Advantages Up to 0% water savings No overspray damage to vehicles or parking lot Targeted watering reduces weed growth No runoff = reduced liability in high traffic areas Installation PFR/FRA XB XX* PVC Misc. XCZ-05-PRF * Select appropriate emitter flow rate PolyFlex Riser/Adapter Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) w/ Thread PVC Laterals, Fittings, Glue 3/4" Xeri Control Zone Kit XB XX PFR-FRA TO DO LIST : Trench, cut and glue PVC laterals. Assemble Control Zone Kit and position in valve box. Connect Control Zone to water source and laterals. Thread PolyFlex Riser/Adapter into PVC tees. Thread Xeri-Bug Emitter into PolyFlex Riser. Flush system until clean water flows. Add planting material and mulch. TIME: (approx.) 1 hr/20' 1 hr 1 hr 5 min/tee 5 min/pfr 2 min INSTALLATION AND MAINTENANCE TIPS : Flush the zone after installation and 2-4 times per year. For larger trees use higher flow PC Modules and Diffuser caps to avoid wash out. Adjust watering time as seasons/weather changes. Cut PolyFlex Risers slightly above grade (before installing the Xeri-Bug Emitters) for an "invisible" installation. The PolyFlex Riser Adapter (FRA) is made of Marlex, so no Teflon tape is needed. 2

29 PVC LATERAL XB EMITTER ON RISER TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 29

30 Narrow Planting Bed/Divider Dense & Combination Applications Solution (Dense) XF Series Dripline Grid Advantages Up to 0% water savings due to zero wind loss No overspray damage to vehicles No runoff = reduced liability in high traffic areas XF Dripline is easy to install, resulting in labor savings Installation Solution (Combination) XPCN Series Nozzle on 100 Spray Heads with Swing Assembly on PVC Lateral Advantages Precise square wetting pattern reduces overspray, overwatering, and runoff = up to 5% water saving Adjustable radius in one unit makes design and installation simple Highest distribution uniformity in the industry for short radius nozzles Installation XFD-0- XCZ-100-PRF AR VALVE KIT MDCF Series OR XFD Series TDS-050 XF Series Dripline. Spacing 1 Control Zone Kit Air Relief Valve Kit Easy Fit Compression Fittings/Adapters XF Dripline 1mm Insert Fittings Tie Down Stake XPCN XXX* 10X SA-XXX PVC Misc XPCN Series Nozzles 100 Series Spray Head with Desired Pop-up Height SA Series Swing Assembly PVC Laterals, Fittings, Glue * Half, full, or quarter nozzles as needed for planting bed TO DO LIST : Assemble Control Zone Kit and connect to water source. (1 hr) Connect Easy Fit Adapter to Easy Fit Tee for connection to Control Zone Kit. (5 min) Cut lengths of XF Series Dripline to build grid in planting area. (10 min/50') Connect lengths of XF Series Dripline to Easy Fit (or XFD Insert) Fittings to create grid. Add Air Relief Valve Kit to the zone. (25 min/50') Stake XF Series Dripline grid in place and flush until clean water flows. (5 min/10') Install planting material. TO DO LIST : Trench, cut and glue PVC laterals. (1 hr/20') Connect lines to water source. (1 hr) Thread 100 Series Spray Head onto swing assembly then thread the swing assembly into the Slip x Slip x Threaded Tee PVC fitting. (5 min/assembly) Cut PVC laterals and glue in Slip x Slip x Threaded Tee assembly. (5 min/tee) Flush system until water flows clear. (As needed) Install XPCN Series nozzles on 100 Spray Heads. (2 min/nozzle) INSTALLATION AND MAINTENANCE TIPS : Flush the zone upon installation and 2-4 times per year. Install AR Valve Kit at high point in the system. Leave XF Series Dripline coil in the sun while preparing for installation. INSTALLATION AND MAINTENANCE TIPS : Flush the zone after installation and 2-4 times per year. Adjust watering time as seasons/weather changes. Ensure that all XPCN Series nozzles are adjusted to the appropriate throw distance. 30

31 Solution (Dense) AIR RELIEF VALVE MDCF FITTINGS or XFD FITTINGS Solution (Combination) PVC LATERAL XF SERIES DRIPLINE TIE DOWN STAKES 100 SPRAY HEAD W/ XPCN SERIES NOZZLE TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 31

32 Narrow Planting Bed/Divider Combination Applications Solution XF Series Dripline Grid with Xeri-Bug Emitters Advantages Up to 0% water savings due to zero wind loss No over spray damage to vehicles or parking lot XF Series Dripline is easy to install for labor savings Installation XFD-0- XCZ-05-PRF MDCF Series OR XFD Series TDS-050 XB XX* PT-025 TS-025 DCB-025 XF Series Dripline. Spacing 3/4 Xeri Control Zone Kit Easy Fit Compression Fittings/Adapters XF Dripline 1mm Insert Fittings Tie Down Stake Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) 1/4 Distribution Tubing 1/4 Tubing Stake Diffuser Bug Cap TS-025 XFD XB XX * Select appropriate emitter flow rate and barbed connection TO DO LIST : Assemble Control Zone Kit and connect to water source. Connect Easy Fit Adapter to Easy Fit Tee for connection to Control Zone Kit. Cut lengths of XF Series Dripline to build grid in planting area. Connect lengths of XF Series Dripline to Easy Fit (or XFD Insert) Fittings to create grid. Stake XF Series Dripline grid in place. Punch self-piercing barb inlet of Xeri-Bug Emitters into XF Series Dripline, connect 1/4 tubing to barb outlet and run 1/4 tubing to larger plant. Stake 1/4 tubing in place and attach bug cap on the end. Flush system until clean water flows. Install planting material. TIME: (approx.) 1 hr 5 min 10 min/50' 20 min/50' 5 min/10' 5 min/emitter 5 min/stake 2 min INSTALLATION AND MAINTENANCE TIPS : Supplemental Xeri-Bug Emitters are placed next to larger plants with higher water requirements. Flush the zone upon installation and 2-4 times per year. Install Xeri-Bug Emitters with the Xeriman Tool (XM Tool) for 50% faster installation. Leave XF Series Dripline coil in the sun while preparing for installation. 32

33 TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS XF SERIES DRIPLINE MDCF FITTINGS TIE DOWN STAKES XB EMITTER TUBING STAKE W/CAP 33

34 Parkway and Walkways Dense Applications Solution Xeri-Pops & XPCN Series Nozzles on a Poly Tubing Lateral Advantages Precise square wetting pattern reduces overspray, overwatering, and runoff Up to 5% water savings due to efficient control of water placement with pressure compensation Adjustable radius in one unit makes design and installation simple Highest distribution uniformity in the industry for short radius nozzles Installation XCZ 05-PRF XP-XX00X XPCN-XXX* XBS MDCF Series PT-025 SPB-025 3/4 Xeri Control Zone Kit Desired Xeri-Pop Pop-up Height XPCN Series Nozzles Xeri Black Stripe Poly Tubing Easy Fit Compression Fittings and Adapters 1/4 Distribution Tubing 1/4 Self Piercing Barb Connector * Half, full, or quarter nozzles as needed for planting bed XP-400X XPCN NOZZLES TO-DO LIST: Trench beds (2- inches deep), cut and lay out Xeri Black Stripe Poly Tubing. Punch 1/4 Self Piercing Barb Connector into Xeri Black Stripe Poly Tubing laterals. Attach 1/4 tubing to outlet barb and run 1/4 tubing to edge of bed. Connect 1/4 tubing to inlet barb on Xeri-Pop. Dig small hole (4 wide x pop up depth) for Xeri-Pop. Determine desired watering pattern and pick appropriate XPCN Series Nozzle. Grasp orange pull ring on top of Xeri-Pop and pull stem up exposing thread area for nozzle. Drop 30-mesh screen into stem and thread nozzle onto stem. Drop Xeri-Pop into hole so the cap is at grade. Fill in dirt around Xeri-Pop so the body is supported in the soil and exit port for nozzle is in the correct position. Flush lines until clean water flows and install planting material. TIME: (approx.) 30 min/50 10 min/20 min/ Xeri-Pop 5 min/nozzle 3 min/nozzle 10 min/ Xeri-Pop 2 min INSTALLATION AND MAINTENANCE TIPS : For seasonal replanting, lift Xeri-Pops out of ground and lay aside. Do not disconnect the 1/4 tubing. After replanting, reinstall the Xeri-Pops in the planting area. Operate Xeri-Pops at 40 psi for optimal performance. FPO Dave's Drip Tip With a simple turn of the nozzle to the next preset stop, the XPCN Series Nozzle adjusts from a 2.5' throw to a 4' throw. All nozzles in the same zone must be adjusted to the same throw. 34

35 PARKING LOT NARROW BEDS PRODUCTS XERI-POP W/ XPCN NOZZLES POTS/BASKETS XBS TUBING TREES SLOPES GOLF COURSES WALLS STREET MEDIANS 35

36 Patio Pots on Separate Zone Page 1 of 3 Solution OPTION A: PVC Tubing with Xeri-Bird & Xeri-Bug Emitters OPTION B: PVC Tubing with Outlet Manifold & 1/4" Landscape Dripline Loop Advantages Up to 0% water savings Xeri-Bird Manifold with PRS offers pressure regulation, filtration and controlled watering to multiple pots Manifold allows for increase/decrease in future plant Installation OPTION Option A: A XBD-0 XB XX* PRS-050 PT-025 TS-025 DCB-025 PVC Misc. Xeri-Bird Outlet Manifold Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) In-stem 30 psi Pressure Regulator 1/4 Distribution Tubing 1/4 Tubing Stake Diffuser Bug Cap * Select appropriate emitter flow rate PVC Laterals, Fittings, Glue OPTION Option B: B EMT-XERI PT-025 XBF-3TEE LDQ PVC Misc. Outlet Manifold 1/4 Distribution Tubing 1/4 Barb Tee 1/4 Landscape Dripline PVC Laterals, Fittings, Glue TO-DO LIST: Trench (as needed), cut and glue PVC laterals. Connect lines to water source. Thread Xeri-Bird Outlet Manifold onto in-stem 30 psi Pressure Regulator and connect to PVC tee. Attach 1/4 distribution tubing to outlets on manifold. Run 1/4 lines to Pots, stake in place with a bug cap on the end. Install the desired Drip Emitter inside manifold.* * Emitter varies by location (0.5 to 2.0 gph) TIME A: 1 hr/20 1 hr 5 min 2 min/ XBD-0 min/ Pot 2 min TO-DO LIST: Trench (as needed), cut and glue PVC laterals. Connect lines to water source. Thread Outlet Manifold onto riser, then connect to PVC tee. Attach 1/4 distribution tubing to outlets on manifold. Run 1/4 lines to pots and connect tubing to barb tee. Then run 1/4 Landscape Dripline in a circle inside the pot and connect both ends to the barb tee. TIME B: 1 hr/20 1 hr 2 min/ EMT-Xeri 2 min min/pot INSTALLATION AND MAINTENANCE TIPS : Flush the zone after installation and 2-4 times per year. Adjust watering time as seasons/weather changes. 3

37 OPTION A: OPTION B: 1/4" DISTRIBUTION TUBING XBD-0 OR EMT-XERI PVC LATERAL TUBING STAKE W/ CAP 1/4" LANDSCAPE DRIPLINE TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 3

38 Patio Pots on Separate Zone Page 2 of 3 Solution Poly Tubing Lateral with Multi-Outlet Xeri-Bug Advantages Up to 0% water savings Poly tubing flexible for odd shaped areas Multi-Outlet Xeri-Bug ensures even watering to multiple pots Installation XCZ-05-PRF XB-XX-* XBS PT-025 TS-025 DCB-023 3/4 Xeri Control Zone Kit Multi-Outlet Xeri-Bug ( Outlet PC Manifold w/ Barb Inlet) Xeri Black Stripe Poly Tubing 1/4 Distribution Tubing 1/4 Tubing Stake Diffuser Bug Cap * Select appropriate emitter flow rate TS-025 XB-XX- XBS TO DO LIST : Cut and lay out poly lines. Assemble Control Zone Kit and connect to water source and poly lines. Punch hole in poly tubing and insert XB-XX- manifold. Connect 1/4 tubing to XB-XX- barb outlets and run tubing to pots. Stake in place with a bug cap on the end. TIME: (approx.) 30 min/50 1 hr min 3 min/xb-xx- min/pot 3 min/pot INSTALLATION AND MAINTENANCE TIPS : For invisible installation, run 1/4 tubing through the drain hole in the bottom of the pot prior to adding plant material. FPO Dave's Drip Tip Do not run 1/4 tubing more than 5 -' from the XB emitter device. 3

39 XBS TUBING MULTI-OUTLET XERI-BUG TUBING STAKE W/CAP 1/4" DISTRIBUTION TUBING TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 39

40 Patio Pots on Separate Zone Page 3 of 3 Solution OPTION A: Poly Tubing Lateral with Xeri-Bug Barb Emitters OPTION B: Poly Tubing Lateral with 1/4 Landscape Dripline Loop FPO Advantages Up to 0% water savings Poly tubing flexible for odd shaped areas Xeri-Bug Emitters can accommodate the watering needs of a variety of potted plants Installation OPTION Option A: A XCZ-05-PRF 3/4 Xeri Control Zone Kit XBS Xeri Black Stripe Poly Tubing PT-025 1/4 Distribution Tubing XB XX* Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) TS-025 1/4 Tubing Stake DCB-023 Diffuser Bug Cap * Select appropriate emitter flow rate OPTION Option B: B XCZ-05-PRF XBS PT-025 XBF1CONN XBF 3TEE LDQ /4 Xeri Control Zone Kit Xeri Black Stripe Poly Tubing 1/4 Distribution Tubing 1/4 Barb Connector 1/4 Barb Tee 1/4 Landscape Dripline TO-DO LIST: Cut and lay out poly lines. Assemble Control Zone Kit and connect to water source and poly lines. Use Xeri-Bug Emitters self-piercing barb to connect poly lateral tubing with 1/4 distribution tubes. Run 1/4 distribution tubes to pots. Connect distribution tubes to Tubing Stake with a bug cap on the end. TIME A: 30 min/50 1 hr min min/pot 3 min/pot TO-DO LIST: Cut and lay out poly lines. Assemble Control Zone Kit and connect to water source and poly lines. Insert 1/4 barb connector into poly line, connect 1/4 distribution tubing to barb connector, run 1/4 lines to pots and connect tubing to barb tee. Then create loop by running 1/4 Landscape Dripline in a circle inside the pot and connect both ends to the barb tee. TIME B: 30 min/50 1 hr min min/pot INSTALLATION AND MAINTENANCE TIPS : Do not run 1/4 tubing more than 5 -' from the XB emitter device. 40

41 OPTION A: TUBING STAKE W/ CAP OPTION B: 1/4" LANDSCAPE DRIPLINE XBS TUBING XB EMITTER or BARB CONNECTOR 1/4" DISTRIBUTION TUBING TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 41

42 Hanging Baskets Solution OPTION A: Poly Tubing Lateral with Xeri-Bug Emitters OPTION B: Poly Tubing Lateral with 1/4 Landscape Dripline Loop Advantages Up to 0% water savings Targeted watering in baskets Eliminates hand watering Connect to irrigation timer for consistent automatic watering Installation Option OPTION A: A XCZ-05-PRF XBS XB XX* PT 025 XM Tool Electrical Staples TS-025 DCB-025 3/4 Control Zone with 40 psi Pressure Regulator Xeri Black Stripe Poly Tubing Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) 1/4 Distribution Tubing XM Installation Tool 1/2 Metal Staples 1/4 Tubing Stake Diffuser Bug Cap * Select appropriate emitter flow rate and barbed connection TO-DO LIST: Assemble Control Zone Kit at water source and connect poly tube laterals to edge of structure. Elbow poly lateral in vertical line up structure to eaves Staple poly lateral to structure. Staple poly lateral along underside of eaves. Use XM Tool to punch Xeri-Bug Emitters into poly lateral above baskets. Connect short length of 1/4 tubing to Xeri-Bug Emitters and stake in basket. Add bug caps to ends of 1/4 lines. TIME A: 1 hr 40 min/50 30 min/50 10 min/ Basket min/basket OPTION Option B: B XCZ-05-PRF XBS PT-025 XBF1CONN XBF 3TEE LDQ TO-DO LIST: 3/4 Xeri Control Zone Kit Xeri Black Stripe Poly Tubing 1/4 Distribution Tubing 1/4 Barb Connector 1/4 Barb Tee 1/4 Landscape Dripline Assemble Control Zone Kit at water source and connect poly tube laterals to edge of structure. Elbow poly lateral in vertical line up structure to eaves. Staple poly lateral to structure. Staple poly lateral along underside of eaves. Use XM Tool to punch 1/4 barb connector into poly lateral above baskets. Insert 1/4" barb connector into poly line, connect 1/4" distribution tubing to barb connector, run 1/4" lines to baskets and connect tubing to barb tee. Then create loop by running 1/4" Landscape Dripline in a circle inside the basket and connect both ends to the barb tee. TIME B: 1 hr 40 min/50 30 min/50 10 min/ Basket min/basket INSTALLATION AND MAINTENANCE TIPS : Flush the zone after installation and 2-4 times per year. Use XM Tool for faster installation of Xeri-Bug Emitters and 1/4 barb connectors. Break up watering cycles to avoid excess drainage. 42

43 OPTION A: TUBING STAKE W/ CAP XB EMITTER or BARB CONNECTOR XBS TUBING OPTION B: 1/4" LANDSCAPE DRIPLINE TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 43

44 Slopes Sparse Applications Solution Xeri-Bird & Xeri-Bug Emitters on a PVC Lateral Advantages Up to 5% water savings Xeri-Bird manifold with PRS offers pressure regulation, filtration and controlled watering to multiple plants Manifold allows for increase/decrease in future plant water demands Installation XBD-0 XB XX* PRS-050 PT-025 TS-025 DCB-025 PVC Misc. SEBX Xeri-Bird Outlet Manifold Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) In-stem 30 psi Pressure Regulator 1/4 Distribution Tubing 1/4 Tubing Stake Diffuser Bug Caps PVC Laterals, Fittings, Glue Emitter Box (optional) * Select appropriate emitter flow rate and barbed or threaded connection XBD-0 PRS-050 XB XX TO DO LIST : Trench, cut and glue PVC laterals. Connect lines to water source. Thread Xeri-Bird Outlet Manifold onto in-stem 30 psi Pressure Regulator, then connect to PVC tee. Attach 1/4 distribution tubing to outlets on Xeri-Bird Outlet Manifold. Run 1/4 lines to plants, stake in place with a Diffuser Bug Cap on the end. Install the desired Xeri-Bug Emitter inside Xeri-Bird Outlet Manifold. Use and SEBX Emitter Box as added protection for the Xeri-Bird. (optional) TIME: (approx.) 1 hr/20' 1 hr 5 min/assembly 3 min/xbd-0 min/stake 2 min INSTALLATION AND MAINTENANCE TIPS : Flush the zone after installation and 2-4 times per year. Install Xeri-Bug Emitters in Xeri-Bird Outlet Manifold with selfpiercing barb or threaded end up. Leave slack in 1/4 tubing next to manifold in case of unexpected maintenance. FPO Dave's Drip Tip Do not run 1/4 tubing more than 5 -' from the XBD-0. 44

45 XBD-0 NEED PVC INFORMATION LATERAL FOR THIS IMAGE TUBING STAKE W/CAP TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 45

46 Slopes Dense or Combination Applications Solution XF Series Dripline Grid with Xeri-Bug Emitters Advantages Up to 0% water savings due to zero wind loss Low maintenance results in labor savings No runoff = reduced liability in high traffic areas XF Dripline is easy to install, resulting in labor savings Installation XFD-0- XCZ-100-PRF AR Valve Kit MDCF Series OR XFD Series XB XX* PT-025 TS-025 TDS-050 XM Tool DCB-025 TO DO LIST : Assemble Control Zone Kit and connect to water source. Connect Easy Fit Adapter to Easy Fit Tee for connection to Control Zone Kit. Cut lengths of XF Series Dripline to assemble grid in planting area. Connect lengths of XF Series Dripline to Easy Fit Fittings (or use XF Dripline fittings) to create grid. Add Air Relief Valve Kit to the zone. Insert Xeri-Bug Emitters into XF Series Dripline to provide supplemental watering for larger plants. Stake XF Series Dripline grid in place and flush until clean water flows. Install planting material. XF Series Dripline. Spacing 1 Xeri Control Zone Kit Air Relief Valve Kit * Select appropriate emitter flow rate Easy Fit Compression Fittings/Adapters XF Dripline 1mm Insert Fittings Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) 1/4 Distribution Tubing 1/4 Tubing Stake Tie Down Stake Xeriman Installation Tool Diffuser Bug Cap INSTALLATION AND MAINTENANCE TIPS : Supplemental Xeri-Bug Emitters are placed next to larger plants with higher water requirements. Flush the zone upon installation and 2-4 times per year. Install AR Valve Kit at high point in the system. Leave XF Series Dripline coil in the sun while preparing for installation. Use the Xeriman Tool to install the emitters into XF Series Dripline. AR VALVE KIT MDCF FITTINGS TIME: (approx.) 1 hr 5 min 10 min/50' 25 min/50' 3 min/emitter 5 min/10' 4

47 TUBING STAKE W/CAP MDCF FITTINGS or XFD FITTINGS XF SERIES DRIPLINE MDCF FITTINGS or XFD FITTINGS XB EMITTER TIE DOWN STAKES TUBING STAKE W/CAP AIR RELIEF VALVE XF SERIES DRIPLINE TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 4

48 Slopes Combination Applications Solution XF Series Dripline Grid with Xeri-Bug Emitters Advantages Up to 0% water savings due to zero wind loss Low maintenance results in labor savings XF Dripline is easy to install, resulting in labor savings Installation XFD-0- XCZ-100-PRF AR Valve Kit MDCF Series OR XFD Series XB XX* PT-025 TS-025 TDS-050 DCB-025 * Select appropriate emitter flow rate TO DO LIST : XF Series Dripline. Spacing 1 Xeri Control Zone Kit Air Relief Valve Kit Easy Fit Compression Fittings/Adapters XF Dripline 1mm Insert Fittings Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) 1/4 Distribution Tubing 1/4 Tubing Stake Tie Down Stake Diffuser Bug Cap Assemble Control Zone Kit and connect to water source. Connect Easy Fit adapter to Easy Fit Tee for connection to Control Zone Kit. Cut lengths of XF Series Dripline to assemble grid in planting area. Use MDCF Fittings (or XF Dripline fittings) to create grid. Add Air Relief Valve Kit and staple grid in place. Insert Xeri-Bug Emitters into XF Series Dripline for supplemental watering. Connect 1/4 tubing to Xeri-Bug Emitters, run lines and stake next to larger plants. Flush zones until clean water flows. Install planting material. XFD XB XX TIME: (approx.) 1 hr 5 min/xcz 10 min/50 1 hr 30 min min/stake 2 min INSTALLATION AND MAINTENANCE TIPS : Supplemental Xeri-Bug Emitters or Pressure Compensating Modules can be placed next to larger plants with higher water requirements. Flush the zone upon installation and 2-4 times per year. Install the Air Relief Valve Kit at high point in the system. Leave XF Series Dripline coil in the sun while preparing for installation. 4

49 MDCF FITTINGS or XFD FITTINGS TUBING STAKE W/CAP XB EMITTER TIE DOWN STAKES XF SERIES DRIPLINE AIR RELIEF VALVE TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 49

50 Street Medians Sparse Applications Solution PolyFlex Riser/Adapter & Xeri-Bug Emitters on PVC Lateral Advantages Up to 0% water savings due to zero wind loss Targeted watering at plants reduces weed growth Pressure Compensating Emitters available from 0.5 to 24 gph for a variety of plant watering needs Installation PFR/FRA XB XX* PVC Misc. * Select appropriate emitter flow rate PolyFlex Riser/Adapter Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) w Thread PVC Laterals, Fittings, Glue PRF/FRA XB XX TO DO LIST : Trench, cut and glue PVC laterals. Assemble Control Zone Kit and connect to water source and laterals. Thread PFR/FRA into PVC Tee fitting. Thread Xeri-Bug Emitter into PolyFlex Riser. Flush system until clean water flows. Add planting material and mulch. TIME: (approx.) 1 hr 1 hr 3 min/tee 2 min/pfr 2 min INSTALLATION AND MAINTENANCE TIPS : Flush the zone after installation and 2-4 times per year. For larger trees use higher flow Pressure Compensating Modules and Diffuser Caps to avoid wash out. Adjust watering time as seasons/weather changes. Cut PolyFlex Risers slightly above grade (before installing the Xeri-Bug Emitters) for an "invisible" installation. PolyFlex Adapter (FRA) is made of Marlex so no Teflon tape is needed. 50

51 PVC LATERAL PVC ELBOW PVC TEE FITTING W/ RISER/ADAPTER & XERI-BUG EMITTER TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 51

52 Street Medians Dense Applications Solution XF Series Dripline Grid Advantages Up to 0% water savings due to zero wind loss No overspray damage to roadways and vehicles No runoff = reduced liability in high traffic areas XF Dripline is easy to install, resulting in labor savings Installation XFD-0- XCZ-100-PRF AR Valve Kit MDCF Series OR XFD Series TDS-050 PVC Misc. XP00X XPCN QTR XF Series Dripline. Spacing 1 Xeri Control Zone Kit Air Relief Valve Kit Easy Fit Compression Fittings/Adapters XF Dripline 1mm Insert Fittings Tie Down Stake PVC Laterals and Fittings Xeri-Pop (optional) XPCN Series Nozzle (optional) XFD MDCF FITTINGS TO DO LIST : Assemble Control Zone Kit and connect to water source. Cut lengths of XF Series Dripline to build grid in planting area. Connect lengths of XF Series Dripline to Easy Fit Fittings (or XF Dripline 1mm fittings) to create grid (add Air Relief Valve Kit to the zone and connect to Control Zone Kit). Stake XF Series Dripline grid in place and flush until clean water flows. Install planting material. TIME: (approx.) 1 hr 10 min/50 25 min/50 5 min/10 INSTALLATION AND MAINTENANCE TIPS : Flush the zone upon installation and 2-4 times per year. Install Air Relief Valve Kit at high point in the system. Leave XF Series Dripline coil in the sun while preparing for installation. FPO Dave's Drip Tip Add a Xeri-Bubbler Xeri-Pop with an XPCN Series Nozzle to the line nearest Control Zone/Valve box as an indicator for maintenance crews. 52

53 XF SERIES DRIPLINE MDCF FITTINGS or XFD FITTINGS TIE DOWN STAKES TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 53

54 Street Medians Dense Applications Solution XPCN Series Nozzle on 100 Spray Heads with Swing Assembly on PVC Lateral Advantages Precise square wetting pattern reduces overspray, overwatering, and runoff Up to 5% water savings due to efficient control of water placement with pressure compensation Adjustable radius in one unit makes design and installation simple Highest distribution uniformity in the industry for short radius nozzles Installation XXPCN XXX* 1XX SA-XXX PVC Misc XPCN Series Nozzles 100 Series Spray Head with Desired Pop-up Height SA Series Swing Assembly PVC Laterals, Fittings, Glue * Half, full, or quarter nozzles as needed for planting bed 10 XPCN NOZZLES TO DO LIST : Trench, cut, and glue PVC laterals. Connect lines to water source. Thread 100 Series Spray Head onto swing assembly then thread the swing assembly into the Slip x Slip x Threaded Tee PVC fitting. Cut PVC laterals and glue in Slip x Slip x Threaded Tee assembly. Flush system until water flows clear. Install XPCN Series nozzles on 100 Spray Heads. TIME: (approx.) 1 hr/20 1 hr 5 min/assembly 5 min/tee As needed 2 min/nozzle INSTALLATION AND MAINTENANCE TIPS : Flush the zone after installation and 2-4 times per year. Adjust watering time as seasons/weather changes. Ensure that all XPCN Series Nozzles are adjusted to the appropriate throw distance. Dave's Drip Tip FPOWith a simple turn of the nozzle to the next preset stop, the XPCN Series Nozzle adjusts from a 2.5' throw to a 4' throw. All nozzles in the same zone must be adjusted to the same throw. 54

55 PVC LATERAL 100 SPRAY HEAD W/ XPCN SERIES NOZZLE TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 55

56 Street Medians Combination Applications Solution XF Series Dripline Grid with Xeri-Bug Emitters Advantages Up to 0% water savings due to zero wind loss No overspray damage to roadways and vehicles No runoff = reduced liability in high traffic areas Low maintenance results in labor savings XF Dripline is easy to install, resulting in labor savings Installation XFD-0- XCZ-100-PRF AR Valve Kit MDCF Series OR XFD Series XB XX* PT-025 TS-025 TDS-050 DCB-025 * Select appropriate emitter flow rate XF Series Dripline. Spacing 1 Xeri Control Zone Kit Air Relief Valve Kit Easy Fit Compression Fittings/Adapters XF Dripline 1mm Insert Fittings Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) 1/4 Distribution Tubing 1/4 Tubing Stake Tie Down Stake Diffuser Bug Cap XFD MDCF FITTINGS TO DO LIST : Assemble Control Zone Kit and connect to water source. Connect Easy Fit series for connection to Control Zone Kit. Cut lengths of XF Series Dripline to assemble grid in planting area. Use Easy Fit Compression Fittings (or XF Dripline fittings) to create XF Series Dripline grid. Add Air Relief Valve Kit and stake grid in place. Insert Xeri-Bug Emitters into XF Series Dripline for supplemental watering. Connect 1/4 tubing to Xeri-Bug Emitters, run lines and stake next to larger plants. Flush zones until clean water flows. Install planting material. TIME: (approx.) 1 hr 5 min 10 min/50 1 hr 30 min min/stake 2 min INSTALLATION AND MAINTENANCE TIPS : Flush the zone upon installation and 2-4 times per year. Install Air Relief Valve Kit at high point in the system. Leave XF Series Dripline coil in the sun while preparing for installation. Supplemental Xeri-Bug Emitters or Pressure Compensating Modules are placed next to larger plants with higher water requirements. 5

57 MDCF FITTINGS or XFD FITTINGS TIE DOWN STAKES TO WATER SUPPLY TUBING STAKE W/CAP XB EMITTER AIR RELIEF VALVE XF SERIES DRIPLINE TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 5

58 Walls Retaining Walls Solution XF Series Dripline Advantages Up to 0% water savings due to zero wind loss Targeted watering helps reduce erosion of wall No runoff = reduced liability in high traffic areas XF Dripline is easy to install, resulting in labor savings Installation XFD-0- XCZ-100-PRF MDCF Series TDS-050 XF Series Dripline. Spacing 1 Xeri Control Zone Kit Easy Fit Compression Fittings/Adapters Tie Down Stake XFD MDCF FITTINGS TO DO LIST : Assemble Control Zone Kit and connect to water source. Cut lengths of XF Series Dripline to lay laterally below retaining wall. Connect lengths of XF Series Dripline to Easy Fit Fittings and add Flush Cap to end. Connect to Control Zone Kit. Stake XF Series Dripline in place and flush until clean water flows. Install planting material. TIME: (approx.) 1 hr 10 min/50 30 min/50 5 min/10 INSTALLATION AND MAINTENANCE TIPS : Flush the zone upon installation and 2-4 times per year. Install Air Relief Valve Kit at high point in the system. Leave XF Series Dripline coil in the sun while preparing for installation. Break up watering cycles to avoid run off or pooling of water in blocks. 5

59 AIR RELIEF VALVE MDCF FITTINGS TIE DOWN STAKES XF SERIES DRIPLINE TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 59

60 Flower Bed Combination Applications Solution XF Series Dripline Grid with Xeri-Bug Emitters Advantages Up to 0% water savings No unsightly run off in high visibility areas No damage to walls, entry way or cart paths from overspray XF Dripline is easy to install, resulting in labor savings Installation XFD-0- XCZ-05-PRF MDCF Series TDS-050 XB XX* PT-025 TS-025 DCB-025 * Select appropriate emitter flow rate TO DO LIST : XF Series Dripline. Spacing 3/4 Xeri Control Zone Kit Easy Fit Compression Fittings/Adapters Tie Down Stake Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) 1/4 Distribution Tubing 1/4 Tubing Stake Diffuser Bug Cap Assemble Control Zone Kit and connect to water source. Cut lengths of XF Series Dripline to build grid in planting area. Connect lengths of XF Series Dripline to Easy Fit Fittings to create grid. Connect Easy Fit Adapter to Easy Fit Tee for connection to Control Zone Kit. Stake XF Series Dripline grid in place. Punch self-piercing barb inlet of Xeri-Bug Emitters into XF Series Dripline, connect 1/4 tubing to barb outlet and run 1/4 tubing to larger plant. Stake tubing in place and attach Diffuser Bug Cap on the end. Flush system until clean water flows. Install planting material. XFD XM TOOL XB XX TIME: (approx.) 1 hr 10 min/50 20 min/50 5 min 5 min/10 min/emitter 3 min/stake 2 min INSTALLATION AND MAINTENANCE TIPS : Supplemental Xeri-Bug Emitters are placed next to larger plants with higher water requirements. Flush the zone upon installation and 2-4 times per year. Install Xeri-Bug Emitters with the Xeriman Tool (XM Tool) for 50% faster installation. Leave XF Series Dripline coil in the sun while preparing for installation. 0

61 TUBING STAKE W/CAP XB EMITTER TIE DOWN STAKES MDCF FITTINGS XF SERIES DRIPLINE AIR RELIEF VALVE TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 1

62 Narrow Planting Bed Next to Clubhouse or Cart Path Sparse Application Solution Xeri-Bird & Xeri-Bug Emitters on a PVC Lateral Advantages Up to 0% water savings Xeri-Bird Manifold with PRS offers pressure regulation, filtration and controlled watering to multiple plants Manifold allows for increase/decrease in future plant water demands Installation XBD-0 XB XX* PRS-050 PT-025 TS-025 DCB-025 PVC Misc. SEBX Xeri-Bird Outlet Manifold Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) In-stem 30 psi Pressure Regulator 1/4 Distribution Tubing 1/4 Tubing Stake Diffuser Bug Caps PVC Laterals, Fittings, Glue Emitter Box * Select appropriate emitter flow rate and barbed or threaded connection XBD-0 PRS-050 XB XX TO DO LIST : Trench, cut and glue PVC laterals. Connect lines to water source. Thread Xeri-Bird Outlet Manifold onto in-stem 30 psi Pressure Regulator, then connect to PVC tee. Attach 1/4 distribution tubing to outlets on Xeri-Bird Outlet Manifold. Run 1/4 lines to plants, stake in place with a Diffuser Bug Cap on the end. Install the desired Xeri-Bug Emitter inside Xeri-Bird Outlet Manifold. Use an SEBX Emitter Box for added protection of the Xeri-Bird. (optional) TIME: (approx.) 1 hr/20 1 hr min/assembly 5 min/xbd-0 min/stake 3 min/xbd-0 INSTALLATION AND MAINTENANCE TIPS : Flush the zone after installation and 2-4 times per year. Install Xeri-Bug Emitters in Xeri-Bird Outlet Manifold with self-piercing barb end up. Leave slack in 1/4 tubing next to manifold in case of unexpected maintenance. 2

63 BUILDING WATER SOURCE XBD-0 TUBING STAKE W/ CAP PVC LATERAL TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 3

64 Lanscaped Areas on the Course Adjacent to Tee Box, Fairways or Greens Solution Pressure Compensating Multi-Outlet Xeri-Bug Device on a PVC Lateral Advantages Up to 0% water savings Durable installation in high maintenance areas Targeted watering reduces weed growth and extends life of mulch Native plant life helps reduce water usage Installation XBT GPH Multi-Outlet Xeri-Bug Manifold PT-025 1/4 Distribution Tubing TS-025 1/4 Tubing Stake 1/2 Riser Sch-0 Riser 1/2 MPT DCB-025 Diffuser Bug Cap PVC Misc. PVC Laterals, Fittings, Glue SEBX Emitter Box (optional) XBT-10- TS-025 TO DO LIST : Trench, cut and glue PVC laterals. Assemble Control Zone Kit and position in valve box. Connect Control Zone to water source and laterals. Thread 1/2 riser into PVC and thread 1.0 GPH Multi-Outlet Xeri-Bug Manifold onto riser. Connect 1/4 lines to manifold outlets and run to sparse plantings. Stake in place and add Diffuser Bug Cap to end of lines. Flush system until clean water flows. Add planting material and mulch. TIME: (approx.) 1 hr/20 20 min 1 hr 5 min/assembly 5 min/line 3 min/stake 2 min INSTALLATION AND MAINTENANCE TIPS : Flush the zone after installation and 2-4 times per year. Do not run 1/4 lines more than 5 - from water source for optimal performance. Adjust watering time as seasons/weather changes. FPO Dave's Drip Tip Use an SEBX Emitter Box for added protection of the XBT-10- (optional). 4

65 TUBING STAKE W/CAP PVC LATERAL XBT-10- ON RISER TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS 5

66 Trees Combination Applications Solution Root Watering Series with XF Series Dripline Blank Tubing Advantages Helps prevent damage to hardscapes from tree roots Promotes health in trees and shrubs Vandal resistant Installation XCZ-100-PRF RWS or RWS-M XFD-XXX SPB-025 PT-025 XB XX* OR PC-XX 1" Control Zone Kit Add other drip products as needed (optional) * Select appropriate emitter flow rate RWS Root Watering Series XF Series Dripline Blank Tubing 1/4" Self Piercing Barb Connector 1/4" Distribution Tubing Xeri-Bug Pressure Compensating Drip Emitters (0.5 to 2.0 gph) Pressure Compensating Module (be sure to use a PC Diffuser Cap) XFD RWS TO DO LIST : Assemble Control Zone Kit and connect to water source. Connect lengths of XF Blank Tubing and insert two to four 1/4 Self Piercing Barb Connectors for each tree. Attach length of 1/4" distribution tubing to each barb connector. Thread the 1/4" distribution tubing through the hole in the side of the RWS Root Watering Series unit, secure the 1/4" distribution tubing in the 1/4" tubing support brackets at the top of the RWS and install the appropriate Xeri-Bug or PC Module with Diffuser Cap emitter at the end of the tubing. Install additional drip products as needed for other plant material (optional). Flush system until water runs clear. TIME: (approx.) 1 hr 10 min/50' 10 min/rws as needed INSTALLATION AND MAINTENANCE TIPS : Flush the zone after installation and 2-4 times per year. Leave XF Series Dripline Blank Tubing coils in the sun while preparing for installation. Install emitters and 1/4" Self Piercing Barbs with a Xeriman Tool (XM Tool) for 50% faster installation. FPO Dave's Drip Tip Use two RWS for young/newly planted trees. Use three to four RWS for older/more mature trees.

67 1/4" SELF-PIERCING BARB CONNECTOR ROOT WATERING SERIES XF SERIES DRIPLINE BLANK TUBING Evenly space units around root ball with top even with ground surface. TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS