Infrastructure components for PROFIBUS DP

Transcription

1 IN Modular diagnosis repeater The Modular diagnosis repeater of the IN series is based on a modular extensible repeater with up to maximally 25 isolated bus segments. In addition to the repeater function every bus outlet has a diagnostic function. Besides the known repeater function the bus diagnosis of all outlets is based on the logic and physical data telegrams and restarts of devices or quality characteristics, edge steepness, level and glitches. Using the smart head module, E- head, these values can be set by the web interface and displayed as matrix. Module combinations Depending on the head module selected in combination with the individual extension modules you can opt between a logic and a physical diagnosis. For alarms you can choose based on the de- SNMP management solution. There are different proposals for combination. Basic Line (Basic Rep, ), Premium Line (E-Kopf, ) and Comfort Line (E-Kopf, Diag Rep) Modular diagnosis repeater are examples of how to combine depending on the required level of comfort and degree of intelligence of the modules. All modules can be combined with each other in different variations depending on the requirement. Panoramic view The smart Modular Diagnosis Repeater is integrated in automation systems and is versatile thanks to its modularity. Adaptability Depending on the user s requirements all modules can be combined in different variants. Recognizing danger Depending on the head module selected alarms are given via an LED per segment or switching contact and resp. DP Basic Rep module (E-head) Extension Extension Extension alarm module Indu-Sol GmbH Blumenstrasse Schmoelln Phone: Fax: info@indu-sol.com

2 IN module The module is the basis of the premium and comfort version of the IN voltage connection it has got a LAN connection for the integrated web server. The head is the core of the smart IN series and Diag Rep modules and Diag Rep modules. An alarm module can then given by switching contacts. The E-head is provided with an extended logic and alarms are shown on the web screen as known from the INspektor. For every extension module a device matrix with certain colours for relevant events can be displayed and the alarms stored as snapshots (up to The head has different options to alert the user in case of network deterioration. It is possible to send an , an SNMP trap or the IN can be integrated in a network monitoring software, such as PROmanage. Technical data General data module PA Diag, DP-Master SNMP-Trap SNMP-request with PROmanage LED assignment L M PE module 5 extension 5 indication with each module. LEDs light up red until the alarms have been cleared. Power: : is connected. if everything is o.k. screw terminal for contact point module (E-head) shield shield line A line B Indu-Sol GmbH Blumenstrasse Schmoelln Phone: Fax: info@indu-sol.com

3 Infrastructure components for PROFIBUS DP IN module Web interface Main page: The module to be viewed can be selected, display of all modules installed PA Diag PA1 PA2 Ord.-no.: Main module Network SNMP 'DWH 7LPH Password Firmware Restart System information Main module Module 1- DP-Rep Snapshots Settings PB-Devices 6WDWH &DOFXODWLRQ snapshot list: Click the name and the PROFIBUS diagnosis Suite opens. Display of a snapshot in the PROFIBUS diagnosis Suite Indu-Sol GmbH w Blumenstrasse 3 w Schmoelln w Phone: w Fax: w info@indu-sol.com w Date/Time

4 IN The extension is provided with a D-subminiature connector and can thus open a segment. It is simply connected to the head and is coupled with the backplane bus directly. It obviates the need of a separate voltage supply. Not only peripheral devices and devices can be connected to the segments but also other master systems. The PROFIBUS can be converted from its original line topology to a star topology and spur lines designed without reservation. Each individual segment is monitored by the integrated diagnosis. The alarm LED displays errors diagnosed during monitoring. These terface the device matrix can be displayed and the relevant diagnoses (error telegrams repeat telegrams etc.) read out. The bus physics, too, bar chart for the quality characteristics or an oscilloscope recording. Technical data Extensions... 5 General data memory cards to store up LED assignment PROFIBUS DP connection for SUB-D plug : lights red, when alarm is lying ahead : lights up green, if everthing is o.k. Diagnosis Network monitoring Alerting Extension Practical example Indu-Sol GmbH Blumenstrasse Schmoelln Phone: Fax: info@indu-sol.com

5 PA1 PA Diag PA2 Ord.-no.: PA1 PA Diag PA2 Ord.-no.: Infrastructure components for PROFIBUS DP IN Web interface Choices of IN user interface, every module (except I/O module) can be selected with displays showing up. View of quality characteristics of transmission: measurement of bus physics Main module Module - DP-Rep Event list Snapshots Settings PB-Devices Firmware Event list Snapshots Settings PB-Devices Firmware Oszilloskopansicht mit aktueller Aufzeichnung und gespeicherten Daten Quality rate measurement of the physical bus characteristics Indu-Sol GmbH Blumenstrasse Schmoelln Phone: Fax: info@indu-sol.com

6 IN The extension is provided with four terminals and can thus open four segments each. It is connected to the head and coupled directly via a backplane bus. No separate voltage supply is thus needed. can be created per network. The PROFIBUS can be converted from its original line topology to a star topology and spur lines designed without reservation. An initial simple diagnosis and monitoring is made by the LEDs provided. If connected to an E-head, a diagnosis can also be done via the web interface. Technical data General data to backplane bus PROFIBUS DP Terminal connection for DP Channel Channel 1 Channel 2 Channel 3 Channel from left to right Extensions... 5 LED-index DP Basic Rep Bus (Bus-Quality) Data (Bus-Aktivity) DP2 BUS-LED Green: lights up green, if everything is o.k. Data-LED Green: 3 4 BUS-LED Rot: e.g. Art.-Nr.: Shield Signal line B Signal line A Shield Extension ndu-sol m lum nst ass Sc mo lln Phone: Fax: info@indu-sol.com

7 IN alarm module The alarm module comes with four terminals and is capable of monitoring one IN module per terminal. If available, it is always the last module to be connected and is coupled directly via a backplane channel has got a switching output for alarms and a reset input. The alarm module can be installed in connection with the E-head only. In case of alarm the alarm LED lights up until it is cleared manually via the web interface or the reset input is actuated. The different alarm LEDs show which IN module is affected. The web interface of the E-head is used to select the relevant module to show the relevant device and detailed information. Technical Data General Data Terminal connection for module 1 for module Reset input Switching output for module 3 for module 4 LED-index -LED module 1-4: lights red, when alarm is lying ahead Reset input: light up green, if connected UB Connection diagram M -LED Reset input Module Switching contact for modules Extension alarm module Indu-Sol GmbH Blumenstrasse Schmoelln Phone: Fax: info@indu-sol.com