UN Test Report - ASM P/N 42T4882 (Nom. 63Wh, 11.1V)-

Transcription

1 문서번호 Prepared Reviewed Approved QAEEF PKASM P/N 42T4882 김홍일안경봉남익현남대호최운기정준용 UN Test Report ASM P/N 42T4882 (Nom. 63Wh, 11.1V) 목차 1. UN Transportation Regulation Test 2. Test Procedure 3. Test 4. Sample Image

2 1. UN Transportation Regulation Test Test Test 1. Altitude Simulation Test 2. Thermal Test Test 3. Vibration Test 4. Shock Test 5. External Short Circuit Test 6. Impact Condition Storing at (low pressure)11.6kpa for 6hr at 20+/5 [5± 2,6hr 40±2,6hr,interval max. 30min] x 10cycle Storing at 20± 5 for 24h [Hz 200Hz Hz, in 15min] x 12 times x 3 direction 1) sinusoidal waveform with a logarithmic sweep 2) Hz 18Hz (maintaining 1gn) app. 50Hz (until 8gn) 200Hz (maintaining 8gn), 1.6mm total excursion Half sine shock (peak acceleration : 150gn, pulse duration : 6msec) x 6 (± x, y, z) direction x 3 cycle 100mΩ ext. shortcircuit at 55± 2 1hr continue after returning at 55± 2 Φ=15.8mm bar, 9.1kg mass, 61± 2.5cm height s Measuring mass before/ after each test (If M>5g, less than 0.1%) Measuring voltage before/ after each test (more than 90%) No leakage, no venting, no disassembly, no rupture, no fire No disassembly, no rupture, no fire (after 6 hours) Temp. monitoring (max. 10 ) Test. Over Current = Manufacturer s recommended max. continuous current X 2 Voltage 1.If voltage 18V, V (min.) = 2 x (max. voltage) or V (min.) = 22V. 2.If voltage > 18V, V (min.) = 1.2 x (max. voltage) No disassembly, no fire (after days) Test 8. Forced Only for Cell, not battery. No disassembly, no fire (after days) * Tests through T1T5 shall be conducted in sequence with the same battery. * We declare that the abovementioned test is the result of being checked according to UN Test ( Manual of Test and Criteria ST/SG/AC.10/2/Add.2) QAEEF PKASM P/N 42T4882 [UN] Test Report (CMNote 6cell, C2) 1 / 6

3 2. Test Procedure Sample Sample Preparation Preparation Forced dis test is required to cell level, not pack battery level. Test 1 Test 1 Altitude Altitude Simulation Simulation Test 2 Test 2 Thermal Test Thermal Test Test 3 Test 3 Vibration Vibration Test 4 Test 4 Shock Shock Test 5 Test 5 Ext. Ext. Short Short Circuit Circuit 4 ea 1 st cycle d 4 ea 1 st cycle d 4 ea 50 th cycle d 4 ea 50 th cycle d 10ea 1 st cycle 50% d 10ea 50 th cycle d For cylindrical cells, 5 test cells are required. Test 6 Test 6 Impact Impact Test Test Over Over 4 ea 1 st cycle d 4 ea 50 th cycle d Test 8 Forced * 10ea 1 st cycle d 10ea 50 th cycle d Report Report QAEEF PKASM P/N 42T4882 [UN] Test Report (CMNote 6cell, C2) 2 / 6

4 31. T1T4 Test Before Altitude (T1) Thermal (T2) Vibration (T3) Shock (T4) Residual (%) Loss(%) Residual (%) Loss(%) Residual (%) Loss(%) Residual (%) Loss(%) A. 1st cycle fully state B. 50th cycle fully state Measuring mass before/after each test (If M>5g, less than 0.1%) Measuring voltage before/after each test (more than 90%, only d samples) No leakage, no venting, no disassembly, no rupture, no fire QAEEF PKASM P/N 42T4882 [UN] Test Report (CMNote 6cell, C2) 3 / 6

5 32. T5/T Test A. 1st cycle fully state EXT.Short Circuit (T5) B. 50th cycle fully state EXT.Short Circuit (T5) mΩ ext. shortcircuit at 55±2 Test Condition Temperature < 10 No disassembly, no rupture, no fire within 6 hours A. 1st cycle fully state Over (T) B. 50th cycle fully state Over (T) Test Condition Max. Current : 3800 ma CC/CV 2Imax(600mA) 16.8V cutoff 24Hr No disassembly, no fire within day QAEEF PKASM P/N 42T4882 [UN] Test Report (CMNote 6cell, C2) 4 / 6

6 33. T6 Test (ICR18650C2) Impact (T6) A. 1st cycle 50% state B. 50th cycle fully dis state Test Condition Φ=15.8mm bar, 9.1kg mass, 61±2.5cm height Temperature < 10 No disassembly, no rupture, no fire within 6 hours QAEEF PKASM P/N 42T4882 [UN] Test Report (CMNote 6cell, C2) 5 / 6

7 4. Sample Image QAEEF PKASM P/N 42T4882 [UN] Test Report (CMNote 6cell, C2) 6 / 6