4, DG UV Test. EC-Type Examination (Module B) Certificate. A.1/3.11 a - "A" Class divisions, fire integrity

Size: px

Start display at page:

Download "4, DG UV Test. EC-Type Examination (Module B) Certificate. A.1/3.11 a - "A" Class divisions, fire integrity"

Lorraine Mosley
5 years ago
Views:

1 European notified body Identification number , DG UV Test Prüf- und Zertifizierungsstelle BG Verkehr Dienststelle Schiffssicherheit EC-Type Examination (Module B) Certificate Certificate No U.S. Coast Guard Approval No /EC0736/ Name and address of the SAINT-GOBAIN ISOVER G+H AG manufacturer: Bürgermeister-Grünzweig-Strasse Ludwigshafen (Germany) Date of issue: Annex A.1 Item No & Item designation: A.1/3.11 a - "A" Class divisions, fire integrity Product designation: Product Type: Hizontal "A-60" class division A-60 Deck Intended purpose: "A" Class division f sea going vessels accding complying with SOLAS 74/88 Reg. 11-2/9 and 11-2/3.2 as amended Testing based on IMO Resolution MSC.307 (88)-(FTP-Code 2010)* (Specific standard): = not applicable accdance chapter 8.3 IMO Resolution MSC.307 (88) IMO Resolution MSC.61(67)-(FTP-Code), Annex 1, Part 3 Remarks: see Page The type tested was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 96/98/EC as amended by Directive 2012/32/EU subject to any conditions in the schedule (part of this certificate). This certificate may only be used in connection with module(s) D, E F of this directive. Expiry date: Installed equipment stays approved beyond the validity date until it is revoked! Note 1: This certificate will not be valid if the manufacturer makes any changes modifications to the approved equipment, which have not been notified to, and agreed with the notified body named on this certificate. Note 2: Should the specified regulations standards be amended during the validity of this certificate, the product(s) is/are to be re-approved pri to it/they being placed on board vessels to which the amended regulations standards apply. Note 3: The Mark of Confmity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Confmity issued when the production-control phase module (D, E F) of ANNEX B of the Directive is fully complied with and controlled by a written inspection agreement with a notified body. 1 ',1,..4e- -, A' je.. i - % s4.1 1 i I s. xxxx/yy Note 4: YY "Wheelmark" Fmat Last two digits of year mark affixed. XXXX Notified Body number undertaking surveillance module Postal address: BG Verkehr Dienststelle Schiffssicherheit Ottenser Hauptstraße Hamburg Office: Brandstwietel Hamburg -fel: 0 40/ Fax: 0 40/ In any case, the German iginal shall prevail.

2 Page 2 of 3 of the EC-Type Examination Certificate f certificate-number: , date of issue: Technical data / approved drawings and additional conditions and remarks: 1. This EC-Type Examination Certificate is based on the following documents: - Test Rept No PG issued by "Danish Institute of Fire and Security Technology", 2650 Hvidovre (DK), on Assessment No. PG b and PG c issued by "Danish Institute of Fire and Security Technology" (Mr. N. Andersen / Mr. D. Bluhme) on and Letter of the company SAINT-GOBAIN ISOVER G+H AG (Dr. Perner) dated Assessment of interchangeability between various ULTIMATE 36 products issued by "Danish Institute of Fire and Security Technology" (Mr. D. Bluhme) with File No. PH dated Assessment on location of pins f high stiffeners on a Class A-60 Deck insulated with Ultimate U MPN 36 issued by "Danish Institute of Fire and Security Technology" (Mr. D. Bluhme) with File No.PH13169 dated Review of test repts No. PH issued by "Danish Institute of Fire and Security Technology" (Mr. D. Bluhme) dated Executive summary (File No. PHA10034) of the "Danish Institute of Fire and Security Technology" (Mr. D. Bluhme) dated This EC-Type Examination Certificate provides that the assembly of the hizontal division coincides in all items with the construction as described in numbers 4 and 5 and the enclosures to the Test Rept No. PG All measurements of the hizontal A-60 division must be in accdance with the drawing no. 1.1 and 1.2 (enclosures to the Test Rept No. PG 11411) the drawing no. ASS 1.0 and ASS 1.1 (enclosures to the Assessment No. PG c). They can only be changed in compliance with the Prüf- und Zertifizierungsstelle of the Ship Safety Division. 4. The following insulation material (all issued by the Ship Safety Division) has to be used: - ISOVER-marine slab ULTIMATE U MPN 36 / ISOVER-marine slab ULTIMATE U SeaProtect Slab 36 (60 mm, density approx. 36 kg/m3), EC-Type Examination Certificate No ISOVER-marine felt ULTIMATE U MFN 36 / ISOVER-marine felt ULTIMATE U SeaProtect Roll 36 (60 mm, density approx. 36 kg/m3), EC-Type Examination Certificate No ISOVER-marine felt ULTIMATE U MFA 36 / ISOVER-marine felt ULTIMATE U SeaProtect Roll 36A1u1 (60 mm, density approx. 36 kg/m3), EC-Type Examination Certificate No ISOVER-marine slab ULTIMATE U MPG 36 / ISOVER-marien slab ULTIMATE U SeaProtect Slab 36 (60 mm, density approx. 36 kg/m3) with white glass fabric (approx. 120 g/m2), EC-Type Examination Certificate No ISOVER-marine slab ULTIMATE U MPG 36 / ISOVER-marine slab ULTIMATE U SeaProtect Slab 36 (60 mm, density approx. 36 kg/m3) with white glass fabric (approx. 220 g/m2), EC-Type Examination Certificate No ISOVER-marine slab ULTIMATE U MPG 36 / ISOVER-marine slab ULTIMATE U SeaProtect Slab 36 (60 mm, density approx. 36 kg/m3) with white glass fabric (approx. 420 g/m2), EC-Type Examination Certificate No ISOVER-marine slab ULTIMATE U MPA 36 / ISOVER-marine slab ULTIMATE U SeaProtect Slab 36 Alul (60 mm, density approx. 36 kg/m3), EC-Type Examination Certificate No ISOVER-marine slab ULTIMATE U MPV 36 / ISOVER-marine slab ULTIMATE U SeaProtect Slab 36 V1 (60 mm, density approx. 36 kg/m3) with glass tissue (approx. 56 g/m2), EC-Type Examination Certificate No

3 Page 3 of 3 of the EC-Type Examination Certificate f certificate-number: , date of issue: ISOVER marine slab ULTIMATE U MPX 36 / ISOVER marine slab ULTIMATE U SeaProtect Slab 36 X (60 mm, density approx. 36 kg/m3), EC-Type Examination Certificate No ISOVER marine felt ULTIMATE U MFX 36 / ISOVER marine feit ULTIMATE U SeaProtect Roll 36 X (60 mm, density approx. 36 kg/m3), EC-Type Examination Certificate No ISOVER marine feit ULTIMATE U MFV 36 / ISOVER marine felt ULTIMATE U SeaProtect Roll 36 V1 (60 mm, density approx. 36 kg/m3) with yellow reinfced glass fibre tissue (approx. 35 g/m2), EC-Type Examination Certificate No ISOVER marine felt ULTIMATE U MFV 36 / ISOVER marine felt ULTIMATE U SeaProtect Roll 36 VI (60 mm, density approx. 36 kg/m3) with black reinfced glass fibre tissue (approx. 60 g/m2), EC-Type Examination Certificate No The insulation materials (listed Item 4) can also be used with a material thickness of 70 mm. 6. The construction may also be insulated / build with the different variations (I X) accding to the Assessment No. PH Non combustible insulation material as per Test Rept No. PG and the assessments may be replaced by a different one, provided that its composition and physical properties (e.g. heat conductivity, density and thickness of the material) crespond with the tested material and an approval as per directive 96/98, as amended has been obtained. This has to be proved to the Ship Safety Division befehand in written fm. 8. Surface materials which will be used must be not readily ignitable and approved by a European notified body. 9. Adhesives which will be used must be not readily ignitable and approved by a European notified body. 10. The equipment shall be marked in accdance with Article 11 of the Council Directive 96/98/EC of 20 December 1996 on Marine Equipment as amended. 11. This EC-Type Examination Certificate replaces the old EC-Type Examination Certificate, issued on with a running time up to This EC-Type Examination Certificate may only be published transmitted unabridged. Note: This product has been assigned a U.S. Coast Guard approval no. (USCG number) to note type approval to Module B only as it pertains to obtaining U.S. Coast Guard approval as allowed by the "Agreement between the European Community and the United States of America on Mutual Recognition of Certificates of Confmity f Marine Equipment" signed February 27th, The U.S. Coast Guard approval number is: /EC0736/ The equipment manufacturer has to be mark the equipment with this U.S. Coast Guard approval number.

ei DG UV Test EC-Type Examination (Module B) Certificate

ei DG UV Test EC-Type Examination (Module B) Certificate European notified body Identification number 0736 ei DG UV Test Prüf- und Zertifizierungsstelle BG Verkehr Dienststelle Schiffssicherheit EC-Type Examination (Module B) Certificate Certificate No. 100.185