SP/WL/VZ SERIES. PaPIRs MOTION SENSOR

Transcription

1 SP/WL/VZ SERIES PaPIRs MOTION SENSOR

2 Table of Contents SP Series...3 WL Series VZ Series...17 Product range

3 SP Series 1. Low profile achieved w ith fitted lens and embedded sensing circuit. The low profile sensor (Polyethylene: 9.7mm, Silicon-lens: 6mm) is possible using Panasonic s proprietary and high-density electronic component mounting. This technology is achieved by simply embedding the sensing circuits inside the actual sensor. ( See Block Diagram below) With Silicon-lens sensor, the lens is incorporated in the outer package to become a pyroelectric sensor module. This makes it easy to mount the sensor on thin or compact products with limited space. 2. Motion detection w ith 3mm diameter miniature flat lens Security & W ireless Devices Security sensors and cameras Wireless occupancy sensors driven by photovoltaic cells or battery to extend battery life. Housing & Commercial equipment Lighting fixtures and wiring devices Video intercoms, HA control panels Vending machines etc. Home appliances ( Energy savings) Television and PC monitors PC, Air-Conditioners Air Purifiers Wireless and Battery operated monitoring sensing devices A 3 mm diameter flat surface lens is possible using Panasonic s unique Lens Formation Technology for silicon substrates, making the lens operating substantially small compared to other conventional sensors. 3. 1μA low current consumption possible based on Panasonic s proprietary design The development of a specialized circuit allows the reduction of current consumption to 1μA (*). After motion is detected, the sensor will shift to stand-by mode. Reduction of Current consumption allows battery life to be extended for battery driven products. These include wireless based or energy sensitive devices. (Note: Product lineup includes: 1μA, 2μA, and 6μA sensors.) 4. Robust design against false detection Panasonic PaPIRS sensing circuits are enclosed in a metallic case which helps minimize the adverse effects of external electro magnetic fields. (i.e.: radiated noise caused by cellular phones) Since the sensors have a high S/N ratio, they are less sensitive to false starts when operated under different environmental surroundings. Has a built-in amplifier and comparator connected directly to a microcomputer. Compliance with RoHS Directive ORDERING INFORMATION EKMA Output: 1: Digital Current Consumption: 1: 1μA 2: 2μA 3: 6μA Lens Color: 0: No Lens 1: White 2: Black Lens Material: 1: Polyethylene 2: Silicon Detection Range: 01: 5m 02: 3m Mounting: 1: TO-5 3

4 SP Series Ver. 1.2 PRODUCT TYPES PERFORMANCE 1. Detection P erformance Metal Tab 2. Maximum Rated Values (Common for both P E-lens type, and Si-lens type) 4

5 Ver Electrical Characteristic (Conditions for Measuring: Ambient temperature: 25 C (77 F) (*4) (*5): Sleep mode or Standby mode is for current consumption 1µA type. Please refer to TIMING CHART. TIMING CHART 1. Digital Output ( For current consumption 1µA) [Mode] [Duration] 5

6 SP Series Ver Digital Output ( For current consumption 2µA and 6µA) [Duration] DETECTION PERFORMANCE 1. P olyethylene-lens type Metal Tab 2. Silicon-lens type 6

7 Ver Notes Regarding the Detection Zone Target As shown on the diagram, the detection zone is polarized. If a target enters the detection zones + and at the same time, the signals are respectively cancelled and cannot be detected. (Please refer to the detection area diagram for details on P.4.) Detection zone HOW TO USE 1. W iring Diagram (Digital Output) 2. Moving Direction Concept 1) P olyethylene-lens type 2) Silicon-lens type 7

8 SP Series Ver. 1.2 DIMENSIONS 1) P olyethylene-lens type W hen designing your products 2) Silicon-lens type W hen designing your products 8

9 Ver. 1.2 NOTE 1. Basic Principles The PaPIRs Motion Sensor is a pyroelectric infrared sensor that detects variations in infrared rays. However it may not detect in the following cases: lack of movement, no temperature change in the heat source. In addition it can also detect the presence of heat sources other than a human body. Efficiency and reliability of the system may vary depending on actual operating conditions: 1) Detecting heat sources other than the human body, such as: a) small animals entering the detection area, b) white light source (sunlight, car headlights, etc.) directly hitting the sensor, c) sudden temperature changes in the detection area caused by humidifier water vapor emission, or air conditioning system hot/ cold air emissions. 2) Difficulty in sensing the heat source a) Glass, acrylic or similar materials standing between the target and the sensor may not allow a correct transmissions of infrared rays. b) Non-movement or quick movements of the heat source inside the detection area. 3) Expansion of the detection area In case of considerable difference in the ambient temperature and the human body temperature, detection area may be wider than from the configured detection area. 3. Ambient Environmental Conditions 1) Temperature: Ambient Temperature -20 C~+60 C (-4 F ~+140 F) (Do not use in a freezing or condensation environment) Storage Temperature -20 C~+70 C(-4 F~+158 F) 2) Humidity Level: 15~85% Rh (Avoid condensation or freezing of this product) 3) Pressure: 86~106kPa 4) Operating temperatures and humidity level are suggested to prolong usage. However, they do not guarantee durability or environmental resistance. Generally, high temperatures or high humidity levels will accelerate the deterioration of electrical components. Please consider both the planned usage and environment to determine the expected reliability and length of life of the product. 5) This sensor is not waterproof or dustproof. Avoid use in environments subject to excessive moisture, condensation, frost, or containing salt air or dust. If a sensor is used with a cover installed, the initial detection performance specifications may not be able to be met. Confirm the operation under the actual operating conditions. 6) Overheating, oscillations, shocks can cause the sensor to malfunction. 2. Other Handling Cautions 1) Deterioration of detecting performance will happen if dirt and dust adhere to the lens. For silicone type lenses, please take into consideration that dirt and dust may adhere to the lens. 2) The lens of the Polyethylene lens type is made of soft materials (Polyethylene). If any loads or shocks are applied to the lens, due to deformities, and damages, this will lead to malfunction, or deterioration of performance. On occasion of commodity structure design for the Silicon-lens type, please consider to point of protecting lens. 3) The sensor may be damaged by ±200 volts of static electricity. Avoid direct hand contact with the pins and be very careful when operating the product. 4) When soldering the lead wire, hand-solder the sensor using the soldering iron below 350 C, and within 3 seconds. Please avoid soldering using solder tank, this can lead to deterioration of performance. Also, please avoid bending the lead wire to mount the sensor onto the circuit board temporarily. This will damage the sensor. 5) Do not use liquids to wash the sensor. If washing fluid gets through the lens, it can reduce performance. 6) When wiring the product, always use shielded cables and minimize the wiring length to prevent noise disturbances. 4. External surge voltages The inner circuit board can be destroyed by a voltage surge. Use of surge absorption elements is highly recommended. Surge resistance: below the power supply voltage value indicated in the maximum rated values section. 5. Power supply-superimposed noise 1) Please use a stabilized power supply. Power supply noise can cause operating errors. Noise resistance : ±20V or less (Square waves with a width of 50ns or 1μs) 2) To reduce the effect of power supply noise, install a capacitor on the sensor s power supply pin. 6. Drop damage After the sensor had been dropped on the floor, damage can occur resulting in incorrect operation. Therefore, be sure not to use sensors that have been dropped. Safety Precautions Head the following precautions to prevent injury or accidents. Do not use these sensors under any circumstances in which the range of their ratings, environment conditions or other specifications are exceeded. Using the sensors in any way which causes their specifications to be exceeded may generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry and possibly causing an accident. Before connecting, check the pin layout by referring to the connector wiring diagram, specifications diagram, etc., to verify that the connector is connected properly. Connection errors may cause unforeseen problems in operation, generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry. Do not use any motion sensor which has been disassembled or remodeled. Failure modes of sensors include short-circuiting, open-circuiting and rises in temperature. If this sensor is to be used in equipment where safety is a prime consideration, examine the possible effects of these failures on the equipment concerned and ensure safety by providing protection circuits or protection devices. Example: Safety equipment and devices Traffic signals Burglar and disaster prevention 9

10 10 PaPIRs

11 WL Series 11

12 12 SP Series

13 13

14 14 SP Series

15 15

16 SP Series 1. Basic Principles The PaPIRs Motion Sensor is a pyroelectric infrared sensor that detects variations in infrared rays. However it may not detect in the following cases: lack of movement, no temperature change in the heat source. In addition it can also detect the presence of heat sources other than a human body. Efficiency and reliability of the system may vary depending on actual operating conditions: 1) Detecting heat sources other than the human body, such as: a) small animals entering the detection area, b) white light source (sunlight, car headlights, etc.) directly hitting the sensor, c) sudden temperature changes in the detection area caused by humidifier water vapor emission, or air conditioning system hot/ cold air emissions. 2) Difficulty in sensing the heat source a) Glass, acrylic or similar materials standing between the target and the sensor may not allow a correct transmissions of infrared rays. b) Non-movement or quick movements of the heat source inside the detection area. 3) Expansion of the detection area In case of considerable difference in the ambient temperature and the human body temperature, detection area may be wider than from the configured detection area. 3. Ambient Environmental Conditions 1) Temperature: Ambient Temperature -20 C~+60 C (-4 F ~+140 F) (Do not use in a freezing or condensation environment) Storage Temperature -20 C~+70 C(-4 F~+158 F) 2) Humidity Level: 15~85% Rh (Avoid condensation or freezing of this product) 3) Pressure: 86~106kPa 4) Operating temperatures and humidity level are suggested to prolong usage. However, they do not guarantee durability or environmental resistance. Generally, high temperatures or high humidity levels will accelerate the deterioration of electrical components. Please consider both the planned usage and environment to determine the expected reliability and length of life of the product. 5) This sensor is not waterproof or dustproof. Avoid use in environments subject to excessive moisture, condensation, frost, or containing salt air or dust. If a sensor is used with a cover installed, the initial detection performance specifications may not be able to be met. Confirm the operation under the actual operating conditions. 6) Overheating, oscillations, shocks can cause the sensor to malfunction. 2. Other Handling Cautions 1) Deterioration of detecting performance will happen if dirt and dust adhere to the lens. 2) The lens of the Polyethylene lens type is made of soft materials (Polyethylene). If any loads or shocks are applied to the lens, due to deformities, and damages, this will lead to malfunction, or deterioration of performance. 3) The sensor may be damaged by ±200 volts of static electricity. Avoid direct hand contact with the pins and be very careful when operating the product. 4) When soldering the lead wire, hand-solder the sensor using the soldering iron below 350 C, and within 3 seconds. Please avoid soldering using solder tank, this can lead to deterioration of performance. Also, please avoid bending the lead wire to mount the sensor onto the circuit board temporarily. This will damage the sensor. 5) Do not use liquids to wash the sensor. If washing fluid gets through the lens, it can reduce performance. 6) When wiring the product, always use shielded cables and minimize the wiring length to prevent noise disturbances. 4. External surge voltages The inner circuit board can be destroyed by a voltage surge. Use of surge absorption elements is highly recommended. Surge resistance: below the power supply voltage value indicated in the maximum rated values section. 5. Power supply-superimposed noise 1) Please use a stabilized power supply. Power supply noise can cause operating errors. Noise resistance : ±20V or less (Square waves with a width of 50ns or 1μs) 2) To reduce the effect of power supply noise, install a capacitor on the sensor s power supply pin. 6. Drop damage After the sensor had been dropped on the floor, damage can occur resulting in incorrect operation. Therefore, be sure not to use sensors that have been dropped. Safety Precautions Head the following precautions to prevent injury or accidents. Do not use these sensors under any circumstances in which the range of their ratings, environment conditions or other specifications are exceeded. Using the sensors in any way which causes their specifications to be exceeded may generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry and possibly causing an accident. Our company is committed to making products of the highest quality and reliability. Nevertheless, all electrical components are subject to natural deterioration, and durability of a product will depend on the operating environment and conditions of use. Continued use after such deterioration could lead to overhating, smoke or fire. Always use the pruduct in conjunction with proper fire-prevention, safety and maintenance measures to avoid accidents, reduction in product life expectancy and break-down. Before connecting, check the pin layout by referring to the connector wiring diagram, specifications diagram, etc., to verify that the connector is connected properly. Connection errors may cause unforeseen problems in operation, generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry. Do not use any motion sensor which has been disassembled or remodeled. Failure modes of sensors include short-circuiting, open-circuiting and rises in temperature. If this sensor is to be used in equipment where safety is a prime consideration, examine the possible effects of these failures on the equipment concerned and ensure safety by providing protection circuits or protection devices. Example: Safety equipment and devices Traffic signals Burglar and disaster prevention 16

17 17

18 18 VZ Series

19 19

20 20 VZ Series

21 1. Basic Principles The PaPIRs Motion Sensor is a pyroelectric infrared sensor that detects variations in infrared rays. However it may not detect in the following cases: lack of movement, no temperature change in the heat source. In addition it can also detect the presence of heat sources other than a human body. Efficiency and reliability of the system may vary depending on actual operating conditions: 1) Detecting heat sources other than the human body, such as: a) small animals entering the detection area, b) white light source (sunlight, car headlights, etc.) directly hitting the sensor, c) sudden temperature changes in the detection area caused by humidifier water vapor emission, or air conditioning system hot/ cold air emissions. 2) Difficulty in sensing the heat source a) Glass, acrylic or similar materials standing between the target and the sensor may not allow a correct transmissions of infrared rays. b) Non-movement or quick movements of the heat source inside the detection area. 3) Expansion of the detection area In case of considerable difference in the ambient temperature and the human body temperature, detection area may be wider than from the configured detection area. 3. Ambient Environmental Conditions 1) Temperature: Ambient Temperature -20 C~+60 C (-4 F ~+140 F) (Do not use in a freezing or condensation environment) Storage Temperature -20 C~+70 C(-4 F~+158 F) 2) Humidity Level: 15~85% Rh (Avoid condensation or freezing of this product) 3) Pressure: 86~106kPa 4) Operating temperatures and humidity level are suggested to prolong usage. However, they do not guarantee durability or environmental resistance. Generally, high temperatures or high humidity levels will accelerate the deterioration of electrical components. Please consider both the planned usage and environment to determine the expected reliability and length of life of the product. 5) This sensor is not waterproof or dustproof. Avoid use in environments subject to excessive moisture, condensation, frost, or containing salt air or dust. If a sensor is used with a cover installed, the initial detection performance specifications may not be able to be met. Confirm the operation under the actual operating conditions. 6) Overheating, oscillations, shocks can cause the sensor to malfunction. 2. Other Handling Cautions 1) Deterioration of detecting performance will happen if dirt and dust adhere to the lens. 2) The lens of the Polyethylene lens type is made of soft materials (Polyethylene). If any loads or shocks are applied to the lens, due to deformities, and damages, this will lead to malfunction, or deterioration of performance. 3) The sensor may be damaged by ±200 volts of static electricity. Avoid direct hand contact with the pins and be very careful when operating the product. 4) When soldering the lead wire, hand-solder the sensor using the soldering iron below 350 C, and within 3 seconds. Please avoid soldering using solder tank, this can lead to deterioration of performance. Also, please avoid bending the lead wire to mount the sensor onto the circuit board temporarily. This will damage the sensor. 5) Do not use liquids to wash the sensor. If washing fluid gets through the lens, it can reduce performance. 6) When wiring the product, always use shielded cables and minimize the wiring length to prevent noise disturbances. 4. External surge voltages The inner circuit board can be destroyed by a voltage surge. Use of surge absorption elements is highly recommended. Surge resistance: below the power supply voltage value indicated in the maximum rated values section. 5. Power supply-superimposed noise 1) Please use a stabilized power supply. Power supply noise can cause operating errors. Noise resistance : ±20V or less (Square waves with a width of 50ns or 1μs) 2) To reduce the effect of power supply noise, install a capacitor on the sensor s power supply pin. 6. Drop damage After the sensor had been dropped on the floor, damage can occur resulting in incorrect operation. Therefore, be sure not to use sensors that have been dropped. Safety Precautions Head the following precautions to prevent injury or accidents. Do not use these sensors under any circumstances in which the range of their ratings, environment conditions or other specifications are exceeded. Using the sensors in any way which causes their specifications to be exceeded may generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry and possibly causing an accident. Our company is committed to making products of the highest quality and reliability. Nevertheless, all electrical components are subject to natural deterioration, and durability of a product will depend on the operating environment and conditions of use. Continued use after such deterioration could lead to overhating, smoke or fire. Always use the pruduct in conjunction with proper fire-prevention, safety and maintenance measures to avoid accidents, reduction in product life expectancy and break-down. Before connecting, check the pin layout by referring to the connector wiring diagram, specifications diagram, etc., to verify that the connector is connected properly. Connection errors may cause unforeseen problems in operation, generate abnormally high levels of heat, emit smoke, etc., resulting in damage to the circuitry. Do not use any motion sensor which has been disassembled or remodeled. Failure modes of sensors include short-circuiting, open-circuiting and rises in temperature. If this sensor is to be used in equipment where safety is a prime consideration, examine the possible effects of these failures on the equipment concerned and ensure safety by providing protection circuits or protection devices. Example: Safety equipment and devices Traffic signals Burglar and disaster prevention 21

22 Built-in Sensors PRODUCT RANGE Equipment sensors for improved comfort and convenience, safety and energy conservation Acceleration Acceleration Sensors Brightness Light Sensors Motion Sensors Motion Motion Sensor Light Sensor Acceleration Sensor Passive infrared type Area reflective type Made possible by leading-edge MEMS technology, this acceleration sensor is ideal for automotive and mobile devices 2-axis GS2 Making us more comfortable with energy efficient devices...environmentally friendly, cadmium-free Light Sensor Chip type 1-axis GS1 Product name Peak sensitivity wave length Characteristics Motion sensors that always detect your slightest movement MP Motion Sensor MA Motion Sensor Cadmium-free. Built-in optical filter for spectral response similar to that of the human eye. Photocurrent is proportional to illumination. (linear output). Chip type that achieves miniaturization. Product name Detection method Type Characteristics Standard type Spot type Thin short type (V type) Product name Acceleration detection range Characteristics SMD type Short type (H type) Through-hole type Slight motion detection type 10m detection type Middle type (H type) Long type (H type) Long type (V type) Detecting the heat (infrared rays) of the human body and other objects. Sensor 580nm 560nm (Chip type) Sensor Detecting the presence of the human body (or another object) by the reflected beam of LED light from the sensor itself. ±2g ±1.5g Standard type Slight motion detection type Spot type 10m detection type Built-in oscillation circuit type External trigger type Black lens White lens Black lens White lens Black lens White lens Black lens White lens Detection distance 5 to 200cm Detection distance 5 to 200cm High precision and high sensitivity. High reliability: Detection errors due to temperature fluctuation reduced to a minimum. Product lineup covers range of operating voltage and acceleration detection. Built-in amplifier for easy use. Detects even slight motion of a person. Digital output and analog output (with adjustable sensitivity) are available. Ideal for battery driven devices, a low current consumption type (46µA typ.) has also been added to the lineup. *Digital output type only. The sensors are ready for immediate use by simply connecting to a DC power supply. The built-in oscillation circuit removes the need to input a start signal. Can be used with a number of different supply voltages. 1) 5V DC type 2) Free-ranging type (6.5 to 27V DC) These sensors can be used in adjacent positions and can save energy. Can be used with a number of different supply voltages. 1) 5V DC type 2) Free-ranging type (6.5 to 27V DC) 22

23 Pressure Pressure Sensors Pressure Sensors A wide range of rated pressure, including minute pressures Product name PS-A Pressure Sensor PS-A Pressure Sensor (Direct water pressure detection type) Pressure medium Air Air Water Type (*Without glass base type) Rated pressure ±100, 100, 25, 50, 100, 200, 500, 1,000 *40kPa <Low pressure type> 6kPa 19.6 to 49kPa Terminal Pressure inlet direction hole length Opposite the pressure inlet direction 3mm 5mm 8mm 6mm dia. 5mm 3mm dia. 13.5mm 5.45mm dia. Characteristics Compact pressure sensor with built-in amplification and temperature compensation circuit Low pressure type ideal for water level detection applications added to lineup. Not only air, now water pressure can be detected directly. PS Pressure Sensor PF Pressure Sensor Air Rated pressure Bridge resistance 4.9, 14.7, 34.3, *49.0, 98.1, 196.1, 343.2, 490.3, 833.6, kpa 5k Opposite the pressure inlet direction Ultra-miniature Base area 7.2 (W) x 7.2 (D) mm A wide range of rated pressure, including a minute pressure. *40kPa 98.1, 980.7kPa (PS only) 3.3k 23

24 Global Network North America Europe Asia Pacific China Japan Panasonic Electric Works Please contact our Global Sales Companies in: Europe Headquarters Panasonic Electric Works Europe AG Rudolf-Diesel-Ring 2, Holzkirchen, Tel. +49 (0) , Fax +49 (0) , Austria Panasonic Electric Works Austria GmbH Josef Madersperger Str. 2, 2362 Biedermannsdorf, Tel. +43 (0) , Fax +43 (0) PEW Electronic Materials Europe GmbH Ennshafenstraße 30, 4470 Enns, Tel. +43 (0) , Fax +43 (0) , Benelux Panasonic Electric Works Sales Western Europe B.V. De Rijn 4, (Postbus 211), 5684 PJ Best, (5680 AE Best), Netherlands, Tel. +31 (0) , Fax +31 (0) , Czech Republic Panasonic Electric Works Czech s.r.o. Prumyslová 1, Planá, Tel. (+420-) , Fax (+420-) , France Panasonic Electric Works Sales Western Europe B.V. Succursale française, 10, rue des petits ruisseaux, Verrières Le Buisson, Tél. +33 (0) , Fax +33 (0) , Germany Panasonic Electric Works Europe AG Rudolf-Diesel-Ring 2, Holzkirchen, Tel. +49 (0) , Fax +49 (0) , Hungary Panasonic Electric Works Europe AG Erdöalja út 91/a, 1037 Budapest, Tel. +36 (0) , Ireland Panasonic Electric Works UK Ltd. Dublin, Tel (0) , Fax +353 (0) , Italy Panasonic Electric Works Italia srl Via del Commercio 3-5 (Z.I. Ferlina), Bussolengo (VR), Tel. +39 (0) , Fax +39 (0) , Nordic Countries Panasonic Electric Works Nordic AB Sjöängsvägen 10, Sollentuna, Sweden, Tel , Fax , Jungmansgatan 12, Malmö, Tel , Fax , re-security.com Poland Panasonic Electric Works Polska sp. z o.o ul.wołoska 9A, Warszawa, Tel. +48 (0) , Fax +48 (0) , Portugal Panasonic Electric Works España S.A. Portuguese Branch Offi ce, Avda Adelino Amaro da Costa 728 R/C J, Cascais, Tel , Fax Spain Panasonic Electric Works España S.A. Barajas Park, San Severo 20, Madrid, Tel , Fax , Switzerland Panasonic Electric Works Schweiz AG Grundstrasse 8, 6343 Rotkreuz, Tel. +41 (0) , Fax +41 (0) , United Kingdom Panasonic Electric Works UK Ltd. Sunrise Parkway, Linford Wood, Milton Keynes, MK14 6 LF, Tel. +44 (0) , Fax +44 (0) , North & South America USA PEW Corporation of America 629 Central Avenue, New Providence, N.J , Tel , Fax , Asia Pacifi c / China / Japan China Panasonic Electric Works (China) Co., Ltd. Level 2, Tower W3, The Towers Oriental Plaza, No. 2, East Chang An Ave., Dong Cheng District, Beijing , Tel. (010) , Fax (010) Hong Kong Panasonic Electric Works RM1205-9, 12/F, Tower 2, The Gateway, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong, Tel. (0852) , Fax (0852) (Hong Kong) Co., Ltd. Japan Panasonic Electric Works Co., Ltd Kadoma, Kadoma-shi, Osaka , Japan, Tel. (06) , Fax (06) , Singapore Panasonic Electric Works Asia Pacific Pte. Ltd. 101 Thomson Road, #25-03/05, United Square, Singapore , Tel. (06255) 5473, Fax (06253) 5689 Copyright 2010 Printed in Germany 1174 euen 10/10