FS20 / FS720 BACnet Protocol Implementation Conformance Statement (PICS) System Description
|
|
- Coleen Bailey
- 5 years ago
- Views:
Transcription
1 FS20 / FS720 BACnet Protocol Implementation Conformance Statement (PICS) System Description MP6 / IP Control Products and Systems
2 Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Issued by: Siemens Switzerland Ltd. Division International Headquarters Gubelstrasse 22 CH-6301 Zug Tel Edition: Document ID: Siemens Switzerland Ltd,
3 Table of contents 1 About this document Applicable documents Technical terms History of changes Cyber security disclaimer FS20 Fire Detection System Product Model Number Product Description BACnet Standard Device Profile (Annex L) BACnet Interoperable Building Blocks Supported (Annex K) Standard Object Types Supported Implementation Details of Object Types Segmentation Capability Data Link Layer Options Device Address Binding Networking Options Character Sets Supported
4 4 26
5 About this document Applicable documents 1 1 About this document Goal and purpose This document provides a standardized description of the implemented BACnet features. Scope This document is valid for the market package MP6 / introduction package IP6. Target groups The information in this document is intended for the following target groups: Target group Activity Qualification Product manager Is responsible for information passing between the manufacturer and regional company. Coordinates the flow of information between the individual groups of people involved in a project. Project manager Coordinates the deployment of all persons and resources involved in the project according to schedule. Provides the information required to run the project. Project engineer Sets parameters for product depending on specific national and/or customer requirements. Checks operability and approves the product for commissioning at the place of installation. Is responsible for troubleshooting. Installation personnel Assembles and installs the product components at the place of installation. Carries out a performance check following installation. Commissioning personnel Configure the product at the place of installation according to customerspecific requirements. Check the product operability and release the product for use by the operator. Searches for and corrects malfunctions. Maintenance personnel Carries out all maintenance work. Checks that the products are in perfect working order. Searches for and corrects malfunctions. Has obtained suitable specialist training for the function and for the products. Has attended the training courses for Product Managers. Has obtained suitable specialist training for the function and for the products. Has attended the training courses for Project Managers. Has obtained suitable specialist training for the function and for the products. Has attended the training courses for Product Engineer. Has received specialist training in the area of building installation technology or electrical installations. Has obtained suitable specialist training for the function and for the products. Has attended the training courses for commissioning personnel. Has obtained suitable specialist training for the function and for the products. 5 26
6 1 About this document Applicable documents Source language and reference document The source/original language of this document is German (de). The reference version of this document is the international version in English. The international version is not localized. Document identification The document ID is structured as follows: ID code ID_ModificationIndex_Language_COUNTRY -- = multilingual or international Examples A6V _a_de_DE A6V _a_en_-- A6V _a_--_-- Date format The date format in the document corresponds to the recommendation of international standard ISO 8601 (format YYYY-MM-DD). Conventions for text marking Markups Special markups are shown in this document as follows: Requirement for a behavior instruction Behavior instruction with at least two operation sequences Version, option, or detailed information for a behavior instruction Intermediate result of a behavior instruction End result of a behavior instruction Numbered lists and behavior instructions with an operation sequence [ X] Reference to a page number 'Text' <Key> Quotation, reproduced identically Identification of keys > Relation sign and for identification between steps in a sequence, e.g., 'Menu bar' > 'Help' > 'Help topics' Text Identification of a glossary entry Supplementary information and tips The 'i' symbol identifies supplementary information and tips for an easier way of working. 6 26
7 About this document Applicable documents Applicable documents Document ID Title EN ISO : 2010 BACnet standard ANSI/ASHRAE IC BT TechWeb BACnet (For Internal Use Only)! 1.2 Technical terms Term Detector Device BACnet Device Explanation A peripheral device of the fire alarm system The object type representing the communication related properties 7 26
8 1 About this document History of changes 1.3 History of changes The reference document's version applies to all languages into which the reference document is translated. Version Edition date Brief description The first edition of a language version or a country variant may, for example, be version 'd' instead of 'a' if the reference document is already this version. The table below shows this document's history of changes: g Update for MP6 / IP6 BIBBS: DS-RP-A, DM-DCC-B, DM-RD-B not claimed anymore Object Types Supported: Binary Value added, Multistate Value updated (supported) f Firmware revision updated, minor corrections e Update for MP5 / IP5 New Products: FT2080 New Object Types: Life Safety Point, Multi-state Value, Positive Integer Value, Structured-View, ISA_Timer (proprietary) Property ISA_Client_Representation_Refs in Device d Update for MP-EN 4.0 / IP4 New Products: FC2080, FG2020 BACnet protocol version 1.11 Character Sets Supported: UTF-8 replaces ANSI X3.4 Property Event_Message_Texts in Life Safety Zone c Update for MP3.0 / MP3.0 XS New Products: FC721, FC722, FC724, FC726, FT724 Cerberus PRO Max. 64 Panels in system (including BACnet) BACnet protocol version 1.7 Device Management Restart-B service added (BIBB DM-R-B) b Update for MP2.1 New Products: FC2030, FC2060 Max. 32 Panels in system or 16 with BACnet a First edition MP
9 Cyber security disclaimer 2 2 Cyber security disclaimer Products, solutions and services from Siemens include security functions to ensure the secure operation of building automation and control, fire safety, security management, and physical security systems. The security functions on these products, solutions and services are important components of a comprehensive security concept. Drafting, implementing and managing a comprehensive and upto-date security concept, customized to individual needs, is nevertheless necessary, and may result in additional plant- or site-specific preventive measures to ensure secure operation of your site regarding building automation and control, fire safety, security management, and physical security. These measures may include, for example, separating networks, physically protecting system components, user training, multi-level defensive measures, etc. For additional information on security as part of building technology and our product, solution and service offerings, please contact your Siemens sales representative or project department. We strongly recommend to always comply with our security advisories on the latest security threats, patches and other related measures
10 3 FS20 Fire Detection System History of changes 3 FS20 Fire Detection System Date: Vendor name: Siemens (Vendor ID 7) Product name: FS20 Fire Detection System Product model number: Fx20xx (see table below) BACnet protocol version: 1.11 Application software version*: MP-EN 6.0 / MP-GB 2.0 Firmware revision: / *Also valid for IP
11 FS20 Fire Detection System Product Model Number Product Model Number The FS20 Fire Detection System consists of control panels with built in operating units or pure operating terminals. The control panels mainly differ in the number of detectors that can be connected and in the detector line protocols they support. All control panels and operating terminals are based on the same software but get configured by the corresponding system tool. The business channel is reflected in the product model numbers. The PICS are equal for all products listed below: Sinteso Product Description Max. BACnet objects FC2020 FC2030 FC2040 FC2060 FC2080 FG2020 FT2040 FT2080 Compact fire alarm control panel (max. 252 detector devices) Modular fire alarm control panel (max. 756 detector devices) Compact fire alarm control panel (max. 504 detector devices) Modular fire alarm control panel (max detector devices) Modular fire alarm control panel (max detector devices) Modular fire alarm control panel, legacy system (max. 504 detector devices) Standard operating terminal (no detector devices) Comfort operating terminal (no detector devices) ~1 500 ~4 500 ~3 000 ~9 000 ~ ~3 000 ~100 ~100 Cerberus PRO Product Description Max. BACnet objects FC721 similar to FC2020, but only standalone ~1 500 FC722 similar to FC2020 ~1 500 FC724 similar to FC2040 ~3 000 FC726 similar to FC2060 ~9 000 FT724 similar to FT2040 ~ Product Description The FS20 Fire Detection System can be used in a wide range, starting from a standalone small control panel up to a networked system consisting of maximal 64 large control panels which can handle together a total of 32'000 detectors. Each control panel is represented as BACnet device handling its own objects
12 3 FS20 Fire Detection System BACnet Standard Device Profile (Annex L) 3.3 BACnet Standard Device Profile (Annex L) BACnet Advanced Workstation BACnet Operator Workstation BACnet Operator Display BACnet Building Controller BACnet Advanced Application Controller BACnet Application Specific Controller BACnet Smart Sensor BACnet Smart Actuator (B-AWS) (B-OWS) (B-OD) (B-BC) (B-AAC) (B-ASC) (B-SS) (B-SA) 3.4 BACnet Interoperable Building Blocks Supported (Annex K) A indicates the device initiating the request B indicates the device executing the request Data Sharing: Data Sharing Read Property-A DS-RP-A Data Sharing Read Property-B DS-RP-B Data Sharing Read Property Multiple-A DS-RPM-A Data Sharing Read Property Multiple-B DS-RPM-B Data Sharing Read Property Conditional-A (deprecated) DS-RPC-A Data Sharing Read Property Conditional-B (deprecated) DS-RPC-B Data Sharing Write Property-A DS-WP-A Data Sharing Write Property-B DS-WP-B Data Sharing Write Property Multiple-A DS-WPM-A Data Sharing Write Property Multiple-B DS-WPM-B Data Sharing Change of Value -A DS-COV-A Data Sharing Change of Value -B DS-COV-B Data Sharing Change of Value Property -A DS-COVP-A Data Sharing Change of Value Property -B DS-COVP-B Data Sharing Change of Value-Unsolicited-A DS-COVU-A Data Sharing Change of Value-Unsolicited-B DS-COVU-B Data Sharing View-A DS-V-A Data Sharing Advanced View-A DS-AV-A Data Sharing Modify-A DS-M-A Data Sharing Advanced Modify-A DS-AM-A 12 26
13 FS20 Fire Detection System BACnet Interoperable Building Blocks Supported (Annex K) 3 Alarm and Event Management: Alarm and Event Notification-A AE-N-A Alarm and Event Notification Internal-B AE-N-I-B Alarm and Event Notification External-B AE-N-E-B Alarm and Event ACK-A AE-ACK-A Alarm and Event ACK-B AE-ACK-B Alarm and Event Alarm Summary-A AE-ASUM-A Alarm and Event Alarm Summary-B AE-ASUM-B Alarm and Event Enrollment Summary-A AE-ESUM-A Alarm and Event Enrollment Summary-B AE-ESUM-B Alarm and Event Information-A AE-INFO-A Alarm and Event Information-B AE-INFO-B Alarm and Event Life Safety-A AE-LS-A Alarm and Event Life Safety-B AE-LS-B Alarm and Event View Notifications-A AE-VN-A Alarm and Event Advanced View Notifications-A AE-AVN-A Alarm and Event View and Modify-A AE-VM-A Alarm and Event Advanced View and Modify-A AE-AVM-A Alarm and Event Alarm Summary View-A AE-AS-A Alarm and Event Event Log View-A AE-ELV-A Alarm and Event Event Log View and Modify-A AE-ELVM-A Alarm and Event Event Log-Internal-B AE-EL-I-B Alarm and Event Event Log-External-B AE-EL-E-B Scheduling: Scheduling A Scheduling Internal-B Scheduling External-B Scheduling Advanced View Modify-A Scheduling View Modify-A Scheduling Weekly Schedule-A Scheduling Weekly Schedule Internal-B Scheduling Readable-B SCHED-A SCHED-I-B SCHED-E-B SCH-AVM-A SCH-VM-A SCH-WS-A SCH-WS-I-B SCH-R-B 13 26
14 3 FS20 Fire Detection System BACnet Interoperable Building Blocks Supported (Annex K) Trending Trending Viewing and Modifying Trends-A T-VMT-A Trending Viewing and Modifying Internal-B T-VMT-I-B Trending Viewing and Modifying External-B T-VMT-E-B Trending Viewing and Modifying Multiple Values-A T-VMMV-A Trending Viewing and Modifying Multiple Values Internal- B Trending Viewing and Modifying Multiple Values External- B T-VMMV-I-B T-VMMV-E-B Trending Automated Multiple Value Retrieval-A T-AMVR-A Trending Automated Multiple Value Retrieval-B T-AMVR-B Trending View-A T-V-A Trending Advanced View and Modify-A T-AVM-A Trending Archival-A Trending Automated Trend Retrieval-A Trending Automated Trend Retrieval-B T-A-A T-ATR-A T-ATR-B Device Management: Device Management Dynamic Device Binding-A DM-DDB-A Device Management Dynamic Device Binding-B DM-DDB-B Device Management Dynamic Object Binding-A DM-DOB-A Device Management Dynamic Object Binding-B DM-DOB-B Device Management Device Communication Control-A DM-DCC-A Device Management Device Communication Control-B DM-DCC-B Device Management Private Transfer-A DM-PT-A Device Management Private Transfer-B DM-PT-B Device Management Text Message-A DM-TM-A Device Management Text Message-B DM-TM-B Device Management Time Synchronization-A DM-TS-A Device Management Time Synchronization-B DM-TS-B Device Management UTC Time Synchronization-A DM-UTC-A Device Management UTC Time Synchronization-B DM-UTC-B Device Management Reinitialize Device-A DM-RD-A Device Management Reinitialize Device-B DM-RD-B Device Management Backup and Restore-A DM-BR-A Device Management Backup and Restore-B DM-BR-B Device Management Restart-A DM-R-A Device Management Restart-B DM-R-B Device Management List Manipulation-A DM-LM-A 14 26
15 FS20 Fire Detection System Standard Object Types Supported 3 Device Management List Manipulation-B DM-LM-B Device Management Object Creation and Deletion-A DM-OCD-A Device Management Object Creation and Deletion-B DM-OCD-B Device Management Virtual Terminal-A DM-VT-A Device Management Virtual Terminal-B DM-VT-B Device Management Automatic Network Mapping-A DM-ANM-A Device Management Automatic Device Mapping-A DM-ADM-A Device Management Automatic Time Synchronization-A DM-ATS-A Device Management Manual Time Synchronization-A DM-MTS-A Network Management: Network Management Connection Establishment-A Network Management Connection Establishment-B Network Management Router Configuration-A Network Management Router Configuration-B NM-CE-A NM-CE-B NM-RC-A NM-RC-B 3.5 Standard Object Types Supported Object type Supported Can be created dynamically Can be deleted dynamically Analog Input Analog Output Analog Value Binary Input Binary Output Binary Value Calendar Command Device Event Enrollment File Group Loop Multi-State Input Multi-State Output Notification Class Program Schedule 15 26
16 3 FS20 Fire Detection System Standard Object Types Supported Object type Supported Can be created dynamically Can be deleted dynamically Averaging Multi-State Value Trend Log Life-Safety-Point Life-Safety-Zone Accumulator Pulse-Converter Event Log Global Group Trend Log Multiple Load Control Structured-View Access Door (unassigned) Access Credential Access Point Access Rights Access User Access Zone Credential Data Input Network Security Bitstring Value Characterstring Value Date Pattern Value Date Value Datetime Pattern Value Datetime Value Integer Value Large Analog Value Octetstring Value Positive Integer Value Time Pattern Value Time Value 16 26
17 FS20 Fire Detection System Standard Object Types Supported Implementation Details of Object Types Device: Properties supported Readable/ Writable Range restrictions Object_Identifier R Object_Name R Object_Type R System_Status R Vendor_Name R Vendor_Identifier R Model_Name R Firmware_Revision R Application_Software_Version R Location R Description W 40 chars Protocol_Version R Protocol_Revision R Protocol_Services_Supported R Protocol_Object_Types_Supported R Object_List R 30'000 Structured_Object_List Max_APDU_Length_Accepted R Segmentation_Supported R Max_Segments_Accepted R VT_Classes_Supported Active_VT_Sessions Local_Time R Local_Date R UTC_Offset R Daylight_Savings_Status R APDU_Segment_Timeout R APDU_Timeout R Number_Of_APDU_Retries R List_Of_Session_Keys Time_Synchronization_Recipients Max_Master Max_Info_Frames Device_Address_Binding R 20 entries 17 26
18 3 FS20 Fire Detection System Standard Object Types Supported Properties supported Readable/ Writable Range restrictions Database_Revision R Configuration_Files Last_Restore_Time R Backup_Failure_Timeout Backup_Preparation_Time Restore_Preparation_Time Restore_Completion_Time Backup_And_Restore_State Active_COV_Subscriptions R 1000 Slave_Proxy_Enable Manual_Slave_Adress_Binding Auto_Slave_Discovery Slave_Address_Binding Last_Restart_Reason R Time_Of_Device_Restart R Restart_Notification_Recipients W 15 entries UTC_Time_Synchronization_Recipient s Time_Synchronization_Interval Align_Intervals Interval_Offset Profile_Name R ISA_Version (5119) CharacterString ISA_Client_Representation_Refs (4099) BACnetARRAY[N] of BACnetDeviceObjectReferences R R 18 26
19 FS20 Fire Detection System Standard Object Types Supported 3 Life Safety Point: Properties supported Readable/ Writable Range restrictions Object_Identifier R Object_Name R Object_Type R Present_Value R Tracking_Value R Description W 40 chars Device_Type R Status_Flags R Event_State R Reliability R Out_Of_Service R Mode W Accepted_Modes R Time_Delay R Notification_Class R Life_Safety_Alarm_Values R Alarm_Values R Fault_Values R Event_Enable R Acked_Transitions R Notify_Type R Event_Time_Stamps R Event_Message_Texts R Silenced R Operation_Expected R Maintenance_Required R Setting R Direct_Reading R Units R Member_Of R Profile_Name R ISA_Event_Message_Texts (5117) BACnetArray[3] of CharacterString R 19 26
20 3 FS20 Fire Detection System Standard Object Types Supported Life Safety Zone: Properties supported Readable/ Writable Range restrictions Object_Identifier R Object_Name R Object_Type R Present_Value R Tracking_Value R Description W 40 chars Device_Type R Status_Flags R Event_State R Reliability R Out_Of_Service R Mode W Accepted_Modes R Time_Delay R Notification_Class R Life_Safety_Alarm_Values R Alarm_Values R Fault_Values R Event_Enable R Acked_Transitions R Notify_Type R Event_Time_Stamps R Event_Message_Texts R Silenced R Operation_Expected R Maintenance_Required R Zone_Members R Member_Of R Profile_Name R ISA_Event_Message_Texts (5117) BACnetArray[3] of CharacterString R 20 26
21 FS20 Fire Detection System Standard Object Types Supported 3 Binary Value: Properties supported Readable/ Writable Range restrictions Object_Identifier R Object_Name R Object_Type R Present_Value R Description W 40 chars Status_Flags R Event_State R Reliability R Out_Of_Service R Inactive_Text R Active_Text R Priority_Array R Relinquish_Default R Time_Delay R Notification_Class R Alarm_Value R Event_Enable R Acked_Transitions R Notify_Type R Event_Time_Stamps R Event_Message_Texts R Profile_Name R Multi-state Value: Properties supported Readable/ Writable Range restrictions Object_Identifier R Object_Name R Object_Type R Present_Value R Description W 40 chars Status_Flags R Event_State R Out_Of_Service R Number_Of_States R State_Text R 21 26
22 3 FS20 Fire Detection System Standard Object Types Supported Properties supported Readable/ Writable Range restrictions Priority_Array R Relinquish_Default R Time_Delay R Notification_Class R Alarm_Values R Fault_Values R Event_Enable R Acked_Transitions R Notify_Type R Event_Time_Stamps R Event_Message_Texts R Profile_Name R Positive Integer Value: Properties supported Readable/ Writable Range restrictions Object_Identifier R Object_Name R Object_Type R Present_Value R Description W 40 chars Status_Flags R Event_State R Reliability R Out_Of_Service R Units R no-units (95) Priority_Array R Relinquish_Default R Time_Delay R Notification_Class R High_Limit R Low_Limit R Deathband R Limit_Enable R Event_Enable R Acked_Transitions R 22 26
23 FS20 Fire Detection System Standard Object Types Supported 3 Properties supported Readable/ Writable Range restrictions Notify_Type R Event_Time_Stamps R Event_Message_Texts R Profile_Name R ISA_Timer *): Properties supported Readable/ Writable Range restrictions Object_Identifier R Object_Name R Object_Type R Present_Value R Description W 40 chars Status_Flags R Event_State R Reliability R Out_Of_Service R ISA_Timer_State (4100) R ISA_Timer_Running (4101) R Update_Time R ISA_Last_State_Change (4102) R Expiry_Time R ISA_Initial_Timeout (4103) R ISA_Default_Timeout (4104) R Min_Pres_Value R Max_Pres_Value R Resolution R ISA_State_Change_Values R ISA_List_Of_PropertyObject_Referenc es R ISA_Priority_For_Writing R Event_Detection_Enable R Notification_Class R Time_Delay R Time_Delay_Normal R Alarm_Values R Event_Enable R 23 26
24 3 FS20 Fire Detection System Standard Object Types Supported Properties supported Readable/ Writable Range restrictions Acked_Transitions R Notify_Type R Event_Time_Stamps R Event_Message_Texts R ISA_Event_Message_Texts_Config R ISA_Event_Algorithm_Inhibit_Ref R ISA_Event_Algorithm_Inhibit R ISA_Reliability_algorithm_Inhibit R Profile_Name R *) Derived from Addendum ay-1: Timer Object Type Structured View: Properties supported Readable/ Writable Range restrictions Object_Identifier R Object_Name R Object_Type R Description W 40 chars Node_Type R Node_Subtype R Subordinate_List R Subordinate_Annotations R Profile_Name R Notification Class: Properties supported Readable/ Writable Range restrictions Object_Identifier R Object_Name R Object_Type R Description W 40 chars Notification_Class R Priority R Ack_Required R Recipient_List W 15 entries Profile_Name R Writing to properties of type list (e.g. Recipient_List) is just provided as fallback for clients not able to send Add-/RemoveListElement requests
25 FS20 Fire Detection System Segmentation Capability Segmentation Capability Able to transmit segmented messages Window size default = 3 Able to receive segmented messages Window size default = Data Link Layer Options BACnet IP, (Annex J) BACnet IP, (Annex J), Foreign Device ISO , Ethernet (Clause 7) ANSI/ATA 878.1, 2.5Mb. ARCNET (Clause 8) ANSI/ATA 878.1, RS-485 ARCNET (Clause 8), baud rate(s) MS/TP master (Clause 9), baud rate(s) MS/TP slave (Clause 9), baud rate(s) Point-To-Point, EIA 232 (Clause 10), baud rate(s) Point-To-Point, modem (Clause 10), baud rate(s) LonTalk, (Clause 11), medium TP/FT-10 Other 3.8 Device Address Binding Is static device binding supported? Yes No 3.9 Networking Options Router, Clause 6 (remote management functionality/bacnet PTP) Annex H, BACnet Tunnelling Router over IP BACnet/IP Broadcast Management Device (BBMD) Does the BBMD support registrations by foreign devices? Yes No 3.10 Character Sets Supported UTF-8 IBM / Microsoft DBCS ISO ISO (UCS-2) ISO (UCS-4) JIS X
26 Issued by Siemens Switzerland Ltd Division International Headquarters Gubelstrasse 22 CH-6301 Zug Siemens Switzerland Ltd, 2012 Technical specifications and availability subject to change without notice. Document ID: Edition: FS20/FS720
Enterprise Buildings Integrator R500 Protocol Implementation
June 2017 Enterprise Buildings Integrator R500 Protocol Implementation Conformance Statement (PICS) Topic: BACnet Protocol Implementation Conformance Statement (PICS) Date: June 2017 Version 1 Applicable
More informationDelta ORCAview 3.40 BACNET PROTOCOL IMPLEMENTATION CONFORMANCE STATEMENT
Date: December 12, 2012 Vendor Name: Delta Controls Inc. Product Name: ORCAview Product Model Number: DOW-340 Product Version: 3.40 BACnet Protocol Revision: 6 Product Description: ORCAview is an industry
More informationESAC ebacgw Siemens. Date: Oct 15,2008. Product Model Number: Product Version: 1.0 BACnet Protocol Revision: 3. Product Description:
Date: Oct 15,2008 Vendor Name: ESAC srl Product Name: ebacgw-siemens Product Model Number: Product Version: 1.0 BACnet Protocol Revision: 3 Product Description: ebacgw is a BACnet gateway to Siemens WSM
More informationESAC ebacgw Tecnoalarm
Date: Feb 28,2011 Vendor Name: ESAC srl Product Name: ebacgw-tecnoalarm Product Model Number: Product Version: 1.0 BACnet Protocol Revision: 3 Product Description: ebacgw is a BACnet gateway for Tecnoalarm
More informationESAC ebacgw Meteo. Date: Nov 25,2008. Product Model Number: Product Version: 1.0 BACnet Protocol Revision: 3. Product Description:
Date: Nov 25,2008 Vendor Name: ESAC srl Product Name: ebacgw-meteo Product Model Number: Product Version: 1.0 BACnet Protocol Revision: 3 Product Description: ebacgw is a BACnet gateway to the weather
More informationEBI R410 BACnet Direct Protocol Implementation Conformance Statement (PICS)
October 2010 EBI R410 BACnet Direct Protocol Implementation Conformance Statement (PICS) Topic: BACnet Protocol Implementation Conformance Statement (PICS) Date: October 2010 Version 1.7 Applicable Products
More informationTC Compact Series. Features. Description. Technical Specification Sheet Document No December 2, 2009
Technical Specification Sheet Document No. 588-684 December 2, 2009 TC Compact Series The TC Compact Series communicates with other field panels or workstations on a peer-to-peer Automation Level Network
More informationPXC Modular Series for BACnet Networks
Technical Specification Sheet Document No. 149-487 June 15, 2012 PXC Modular Series for BACnet Networks Features Figure 1. PXC Modular. Description The PXC Modular Series for BACnet networks is a high-performance
More informationDocument Introduction Annex A - Protocol Implementation Conformance Statement (Normative) Product Description... 4
NS Series Temperature and Humidity Network Zone and Discharge Air Sensors and NS Series Network Sensors with Fault Code Capability Protocol Implementation Conformance Statement Technical Bulletin Code
More informationCompact Series Unitary Equipment Controller
Technical Specification Sheet Document No. 149-837 January 25, 2011 Compact Series Unitary Equipment Controller Figure 1. PXC Compact Series Controllers (PXC-24). Description The PXC Compact Series Unitary
More informationC5 controller Bacnet
Date: September 02, 2013 Vendor Name: Amalva UAB Product Name: C5 Firmware Revision: 1.000 BACnet Protocol Revision: 12 C5 controller Bacnet BACnet Protocol Implementation Conformance Statement Communication:
More informationMRMS Multi-Room Monitoring Station
Technical Specification Sheet Document. 149-213 October 2, 2014 MRMS Multi-Room Monitoring Station High Definition Color (TFT) Touchscreen Display Meets CE Conformance Standards Immediate feedback on room
More informationFP120-Z1 Power supply kit A (70 W) Technical Manual
FP120-Z1 Power supply kit A (70 W) Technical Manual 2015-07-08 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal,
More informationFan Coil Controller. EFCB Series BACnet Communication Module User Guide. EFCB-BACnet Guide-EUA
EFCB Series EFCB10TU2 EFCB10TU4 EFCB11TU2 EFCB11TU4 EFCB12TU2 EFCB12TU4 (24Vac / 2 relays) (24Vac / 4 relays) (120Vac / 2 relays) (120Vac /4 relays) (240Vac / 2 relays) (240Vac / 4 relays) EFCB-BACnet
More informationIMC BACnet Module. Service Literature. Table of Contents. General. Field Connections. Physical
Service Literature Corp. 0808 L6 06/08 IMC BACnet Module General The IMC BACnet Module (BP1) allows communication between the Lennox IMC M1 8 controller and a BACnet MS/TP network. This module is mounted
More informationFT2011 Floor repeater display Operation Manual
FT2011 Floor repeater display Operation Manual MP6 2015-12-15 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal,
More informationDESCRIPTION OF CONTROL
DESCRIPTION OF CONTROL NUAIRE UNIT CONTROLLED B AN ECOSMART2 CONTROLLER A comprehensive unit control specification - factory fitted and tested to provide guaranteed operation from a single supplier one
More informationFT2010 Floor repeater terminal Operation Manual
FT2010 Floor repeater terminal Operation Manual MP5 / IP5 2013-11-14 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. 2013
More informationB. This Section includes DDC controls for Lighting system installed on the same operator interface as the HVAC controls.
SECTION 17000 BUILDING MANAGEMENT SYSTEM PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationPIR Ready VT76xx Series Programmable & Non-Programmable Thermostats For Commercial HVAC Applications. BACnet Integration Manual September 1, 2010
PIR Ready VT76xx Series Programmable & Non-Programmable Thermostats For Commercial HVAC Applications BACnet Integration Manual September 1, 2010 1 Product Overview The VT76xx PI thermostat family is specifically
More informationCS-RS. Remote Sensor User Manual
CS-RS Remote Sensor User Manual Gas detection device E3Point Network Gas Monitor User Manual Model Key: Monoxivent - CS-RS = Honeywell E3Point Installation questions: Honeywell Analytics 405 Barclay Boulevard
More informationBACnet Integration Manual ITG-VH72xx-BAC-E00 ( _R0 Issue Date: October 21, 2008)
VH7200 Humidistat Series For Humidification & Dehumidification Control For Commercial HVAC Applications BACnet Integration Manual ITG-VH72xx-BAC-E00 (028-6017_R0 Issue Date: October 21, 2008) 1 Product
More informationFDCL221 Line separator
FDCL221 Line separator Technical manual Fire Safety & Security Products Technical specifications and availability subject to change without notice. 2004-2009 Copyright Siemens, Inc. We reserve all rights
More informationBACnet connection C5. EN Installation and service Manual
BACnet connection C5 EN Installation and service Manual EN BACNET CONNECTION AND SETTINGS BACnet is a standard communication protocol for Building Automation and Control (BAC) networks that can be used
More informationDaikin Loop Water Manager Protocol Information
Engineering Data ED 19015 Group: Controls Part Number: ED 19015 Date: August 2012 Supersedes: New Daikin Loop Water Manager Protocol Information BACnet Networks 2012 Daikin Table of Contents Table of Contents...
More informationFDM273 Radio manual call point Mounting
FDM273 Radio manual call point Mounting 2016-11-28 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal, reproduction,
More informationHumidity Controller Specification and Installation Instructions. Model HROB20
Model Description The Humidity Controller is a combination controller and humidistat with support for networked communications via the BACnet MS/TP protocol. The Humidity Controller is an advanced application
More informationFDA241, FDA221 Aspirating Smoke Detector Technical Manual
FDA241, FDA221 Aspirating Smoke Detector Technical Manual 2015-09-29 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Siemens
More informationFDCI221, FDCIO221 Input module, input/output module Technical Manual
FDCI221, FDCIO221 Input module, input/output module Technical Manual 2012-09-30 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without
More informationHouston Independent School District Design Guidelines Version 3.0 Revised August 2015 SECTION DIRECT DIGITAL CONTROLS
SECTION 23 09 23 DIRECT DIGITAL CONTROLS GENERAL 1.1 EECUTIVE SUMMARY A. The Control Systems shall be bid and contracted to the Mechanical Contractor. B. All DDC controllers and control system components
More informationIntesisBox BACnet/IP Server - Notifier ID3000 series
IntesisBox Server - Notifier ID3000 series Gateway for integration of Notifier ID3000, ID3002, ID50 and ID60 fire panels into enabled control systems. Integrate your Notifier fire panels into your BACnet
More informationFDBZ290 Air sampling smoke detection kit Technical Manual
FDBZ290 Air sampling smoke detection kit Technical Manual 2015-12-17 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal,
More informationFire control panels FC726 FC726-XA
Fire control panels FC726 FC726-XA Modular, pre-confectioned, microprocessor-controlled fire control panel for up to max. 1512 device addresses Integrated, user-friendly operating unit Detection and automatic
More informationFT2080 Fire terminal (Touch) Mounting Installation
FT080 Fire terminal (Touch) Mounting Installation 0-09-0 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Siemens Switzerland
More informationCerberus PACE Operating terminals / Call stations Operation Manual
Cerberus PACE Operating terminals / Call stations Operation Manual 2018-07-19 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without
More informationFT2080 Fire terminal (Touch) Mounting Installation
FT080 Fire terminal (Touch) Mounting Installation 06-0-08 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal,
More informationFDCW241 Radio gateway Mounting
FDCW241 Radio gateway Mounting 2017-01-05 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal, reproduction, dissemination
More informationFDS229 Alarm sounder with supplementary optical indication Technical Manual
FDS229 Alarm sounder with supplementary optical indication Technical Manual 2014-02-10 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change
More informationMulti line separator module
Sinteso Cerberus PRO Multi line separator module FDCL221-M Multi line separator module, addressed (FDnet/C-NET) Automatic module with several separate line separators Formation of stub lines (T-branches)
More informationSiemens aspirating smoke detector (ASD) for the addressed FDnet/C-NET detector line or for standalone operation
Sinteso Cerberus PRO FDA241, FDA221 ASD Aspirating smoke detector Siemens aspirating smoke detector (ASD) for the addressed FDnet/C-NET detector line or for standalone operation Patented technology Early
More informationApplication Sheet Chilled/heated ceiling (4 pipe) with 6-way valve on analog output
Heating or cooling with chilled ceiling with changeover with 6-way valve on analog output Modulating control of heating and cooling valve Condensation monitoring Room temperature operation via KNX PL-Link
More informationFS720 Fire detection system Planning
FS720 Fire detection system Planning IP6 2015-12-15 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal, reproduction,
More informationFDUL221 Line tester Technical Manual
FDUL221 Line tester Technical Manual 2017-06-23 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal, reproduction,
More informationXC10 Extinguishing control panels
XC10 Extinguishing control panels Market package 2.1 Advanced control panels for detection and alarming as well as for the activation of the extinguishing process Microprocessor-controlled fire detection
More informationFire control panels FC360
Cerberus TM FIT Fire control panels FC360 FC361-ZZ, FC361-ZA, FC361-YZ, FC361-YA Fire control panels (1-loop) for addressable peripheral devices with integrated operating unit One loop with 126 addresses
More informationASD Pipe System FDA241, FDA221 Planning Mounting
ASD Pipe System FDA241, FDA221 Planning Mounting 2017-09-12 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal,
More informationCall stations and extensions
Novigo Call stations and extensions PT2001-A1, PT2002-A1, PT2008-A1, PT2009-A1, PTO2001-A1, PTO2002-A1, PTO2003-A1, PTO2004-A1, PTO2005-A1, PTO2006-A1, PTO2008-A1 EN 54-16-certified alarm and business
More information13 tones to choose from, 2 programmable alarm levels Adjustable sound levels up to 93 dba
Cerberus PRO Cerberus FIT Interbases DBS721, DBS728, DBS729 Sounder interbase, sounder beacon interbase, sounder interbase with supplementary optical indication for the automatically addressable detector
More informationFDCL221-M Multi line separator module
FDCL221-M Multi line separator module addressable (FDnet/C-NET) Sinteso TM Cerberus PRO Automatic module with several line separators Creation of T taps (stub lines) in the FDnet/C-NET Operation of the
More informationCarbon Monoxide Transmitter
Introduction The CO Transmitter uses an electrochemical sensor to monitor the carbon monoxide level and outputs a fieldselectable 4-20 ma or voltage signal. The voltage signal may also be set to 0-5 or
More informationControl Products & Systems OEM
LMS The modular management system for condensing boilers Control Products & Systems OEM www.siemens.com/buildingtechnologies-oem LMS advanced electronics and proven software At times of dwindling resources,
More informationFC722 Fire control panel
FC722 Fire control panel Series FS720 (MPXS) Cerberus PRO Compact, prefabricated microprocessor-controlled fire control panel for the connection of up to 252 addresses Fire control panel can be used as
More informationOperation Manual Fighter ProVision Software. Version: 0.0 Revision: 1
Operation Manual Fighter ProVision Software Version: 0.0 Revision: 1 TABLE OF CONTENTS 1. Introduction 5 2. Software Installation 5 3. PC Users 6 3.1 Introduction 6 3.2 Default Code 6 3.3 Edit PC User
More informationManual for the integration in BMS/GTC
Manual for the integration in BMS/GTC Communication parameters MODBUS RTU and BACNET COMMUNICATION UTBS PRO-REG Software Version 3.6 EN ÍNDEX 1. GENERALITIES...2 1.1. Introduction...2 1.2. signals types...2
More informationApplication Sheet Fan coil unit with staged fan, 6-way heating/cooling coil (4 pipe) on analog output
Heating with LHW and cooling with CHW changeover Modulating control of heating/cooling coil 6-way valve (4 pipe) on Automatic or manual 3-speed fan control Room temperature and fan speed operation via
More informationFC721 Fire control panel Technical Manual
FC721 Fire control panel Technical Manual IP6 2015-12-15 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Transmittal,
More informationMimic display driver, LED ribbon cable
Sinteso / Cerberus PRO Mimic display driver, LED ribbon cable FT2001-A1, F50F410 FDnet/C-NET mimic display driver and LED ribbon cable for the fire detection systems Sinteso FS20 and Cerberus PRO FS720.
More informationDesign Standards Brief Section 9 Building Automation System and Automatic Controls
Property Services Design Standards Brief Section 9 Building Automation System and Automatic Controls Issue 6 2009 Section 9 Building Management and Information Systems and Automatic Controls CONTENTS PART
More informationInput module, input/output module
Sinteso / Cerberus PRO Input module, input/output module FDCI221, FDCIO221 Input module and input/output module for the automatically addressed detector line Input module FDCI221: Monitorable contact input
More informationASA linear smoke detector
Sinteso / Cerberus PRO ASA linear smoke detector FDL241-9 Linear smoke detector, used addressed or collectively, ASAtechnology TM Reliable smoke detection in large spaces (indoor application) Detection
More informationApplication Sheet Fan coil unit with staged fan, heating and cooling coil (4 pipe) on triac output including lighting and blinds operation
Heating with LTHW and cooling with CHW Modulating control of heating and cooling valve (4 pipe) on triac output Automatic or manual 3-speed fan control Including the control of 4 lighting zones & 2 blinds
More informationFDA241, FDA221 Siemens ASD
FDA241, FDA221 Siemens ASD Patented Technology Sinteso TM Cerberus PRO Compatible with the Siemens FDnet/C-NET loops (requires FDCC221S option) Advanced dual Wavelength optical detection (Blue & Infra-red)
More informationMEPF SPECIFICATIONS SECTION ELECTRICAL GENERAL PROVISIONS SECTION BASIC MATERIALS AND METHODS. MFE MEPF Specification Index Index - 1
MEPF SPECIFICATIONS SECTION 15010 - MECHANICAL GENERAL PROVISIONS SECTION 15150 - SUPPORTS AND ANCHORS SECTION 15190 - MECHANICAL IDENTIFICATION SECTION 15250 - MECHANICAL INSULATION SECTION 15510 - HYDRONIC
More informationInput module, input/output modules
Sinteso / Cerberus PRO Input module, input/output modules FDCI222, FDCIO222, FDCIO224 Input module and input/output modules for the automatically addressed detector line Input module FDCI222: Four monitored
More informationFC2040. Fire control panel. Sinteso. FS20 series, MP6
FC2040 Sinteso Fire control panel FS20 series, MP6 Compact, pre-assembled, microprocessor-controlled fire control panel with integrated operating unit for up to 504 addresses Fire control panel can be
More informationManual call points. Sinteso / Cerberus PRO FDM225, FDM226
Sinteso / Cerberus PRO Manual call points FDM225, FDM226 Manual call points with direct activation for the FDnet/C-NET automatic addressable detector bus Manual call points for addressed Sinteso FS20 and
More informationFS Mircom FX2000 Fire Alarm Panel
Driver Manual (Supplement to the FieldServer Instruction Manual) FS-8705-16 Mircom FX2000 Fire Alarm Panel APPLICABILITY & EFFECTIVITY Effective for all systems manufactured after May 1, 2001 Chipkin Automation
More informationFire control panel for modernization
Sinteso Fire control panel for modernization FC2030 Modular, pre-assembled fire control panel with integrated, user-friendly operating unit for gradual migration to Sinteso. Fire control panel for a maximum
More informationBACnet PTEC Controller VAV 0 to 10V Series Fan and 3- Stage Electric Heat, Application 6657
BACnet PTEC Controller VAV 0 to 10V Series Fan and 3- Stage Electric Heat, Application 6657 140-1158 Building Technologies Table of Contents Overview... 5 BACnet 14 Hardware Inputs... 14 Room Unit Identification...
More informationFC121-ZA / FC122-ZA / FC123-ZA / FC124-ZA
Fire Control Panel FC121-ZA / FC122-ZA / FC123-ZA / FC124-ZA Technical Manual 2014-05-28 Control Products and Systems Legal notice Technical specifications and availability subject to change without notice.
More informationFDCL221-Ex Line adapter (Ex)
FDCL221-Ex Line adapter (Ex) Addressed (FDnet-Ex/C-NET-Ex) For operating FDnet-Ex/C-NET-Ex peripheral devices in potentially explosive areas Sinteso Cerberus PRO Electrical isolation of Ex and non-ex lines
More informationRecording Server PRELOADED
Configuration English Recording Server PRELOADED Rev. 1.1.2 / 2015-12-09 Module BANK Information about copyright, trademarks, design patents 2015 Dallmeier electronic The reproduction, distribution and
More informationFDBZ290 Air sampling smoke detection kit
FDBZ290 Air sampling smoke detection kit Sinteso Cerberus PRO Reliable monitoring for smoke of supply air, exhaust air and recirculation ducts of air conditioning and ventilation systems Suitable for air
More informationInstallation instructions. For the heating engineer. Installation instructions. timeswitch VTS 160 GB, IE
Installation instructions For the heating engineer Installation instructions timeswitch VTS 160 GB, IE Table of contents Table of contents 1 Notes on the installation instructions...4 1.1 Observing other
More informationOracle Communications Performance Intelligence Center
Oracle Communications Performance Intelligence Center System Alarms Guide Release 10.2.1 E77506-01 June 2017 1 Oracle Communications Performance Intelligence Center System Alarms Guide, Release 10.2.1
More informationREPEATER FS5200R INSTRUCTION MANUAL
REPEATER FS5200R INSTRUCTION MANUAL Instruction Manual Page1 CONTENTS 1. Introduction... 3 2. Function... 3 3. Technical data... 3 4. Contents of delivery... 4 5. General information... 5 6. Duty Mode...
More information2015 NEW. Cerberus ECO. enjoy protecting. Product Brouchure. siemens.com/buildingtechnologies
2015 NEW www.siemens.com/buildingtechnologies Cerberus ECO enjoy protecting Product Brouchure siemens.com/buildingtechnologies Cerberus ECO enjoy protecting Lives and businesses deserve reliable protection
More informationFDOOT241-A9-Ex Automatic fire detector Technical Manual
FDOOT241-A9-Ex Automatic fire detector Technical Manual 2015-02-02 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. Siemens
More informationXC10 combined fire detection and extinguishing control
XC10 combined fire detection and extinguishing control Planning Tool for single-sector applications Compact panels for fire detection and extinguishing control Protecting people and assets, business processes
More informationION Meter Alerts TECHNICAL NOTE NOVEMBER In This Document
70072-0125-01 TECHNICAL NOTE NOVEMBER 2006 ION Meter Alerts A PowerLogic ION meter can send alerts to indicate a user specified power system condition such as a power quality problem (including surges,
More informationIntegrated Automation Instrumentation & Terminal Devices
Sections Included In This Standard: 1.1 Building Systems Control 1.2 Building Aumotation Systems (BAS) 1.1 BUILDING SYSTEMS CONTROL A. HVAC CONTROLS: 1. General: Temperature control zones shall not combine
More informationDesigo Total Room Automation User Guide Version 2.1. A6V _en_a_ Building Technologies
Desigo Total Room Automation User Guide Version 2.1 A6V10415564_en_a_21 2015-06-23 Building Technologies Copyright Notice Copyright Notice Notice Document information is subject to change without notice
More informationHERCULES 6 GRAPHICS SYSTEM
HERCULES 6 GRAPHICS SYSTEM USER MANUAL Protec Fire Detection PLC, Protec House, Churchill Way, Nelson, Lancashire, BB9 6RT. Telephone: +44 (0) 1282 717171 Fax: +44 (0) 1282 717273 Web: www.protec.co.uk
More informationXC10 combined fire detection and extinguishing control
XC10 combined fire detection and extinguishing control Planning Tool for multi-sector applications Compact panels for fire detection and extinguishing control Protecting people and assets, business processes
More informationSECTION INTEGRATED AUTOMATION FACILITY CONTROLS
PART 1: GENERAL 1.01 SCOPE OF WORK A. General Contractor shall furnish and commission a fully integrated building automation system (BAS), incorporating direct digital control (DDC) for energy management,
More informationSection 9 System Operation
Section 9 System Operation Operation of the control panel is simple. Menus guide you step-by-step through operations. This section of the manual is an overview of the operation menus. Please read this
More informationFDA241, FDA221 Siemens ASD
FDA241, FDA221 Siemens ASD Patented Technology Compatible with the Siemens FDnet/C-NET loops (requires FDCC221S option) Advanced dual Wavelength optical detection (Blue & Infra-red) Configurable as a Standalone
More informationRoom thermostat with 24-hour time switch and large LCD
Room thermostat with 24-hour time switch and large LCD RDJ100 Programmable, for heating systems Operating modes: Automatic, Comfort, Energy saving, and Frost protection Large LCD display Battery powered:
More informationFDF Sinteso Cerberus PRO Cerberus FIT. Flame detector. Flame detector addressed or collective, ASAtechnology TM
Sinteso Cerberus PRO Cerberus FIT FDF241-9 Flame detector Flame detector addressed or collective, ASAtechnology TM Reliable detection using three infrared sensors and ASAtechnology (indoor and outdoor
More informationSECTION INSTRUMENTATION AND CONTROLS FOR HVAC
SECTION 230923 INSTRUMENTATION AND CONTROLS FOR HVAC PART 1: GENERAL... 2 1.1 Related Sections... 2 1.2 Description... 2 1.3 Approved Control Systems... 2 1.4 Quality Assurance... 3 1.5 Codes and Standards...
More informationThe product segments Heating, ventilation, air conditioning. Control Products & Systems OEM.
The product segments Heating, ventilation, air conditioning Control Products & Systems OEM www.siemens.com/buildingtechnologies-oem The right product for every application Siemens specializes in the development,
More informationFDOOT221, FDOOT241-A3, FDOOT241-A4, FDOOT241-8, FDOOT241-9, FDOOT241-A9, FDO241, FDO221, FDT241, FDT221 Automatic fire detectors Technical Manual
FDOOT221, FDOOT241-A3, FDOOT241-A4, FDOOT241-8, FDOOT241-9, FDOOT241-A9, FDO241, FDO221, FDT241, FDT221 Automatic fire detectors Technical Manual 2015-11-04 Control Products and Systems Legal notice Legal
More informationSection 8 System Operation
Section 8 System Operation Operation of the control panel is simple. Menus guide you step-by-step through operations. This section of the manual is an overview of the operation menus. Please read this
More informationRadio fire detection system
OEM Radio fire detection system FDOOT271-O, FDM273-O, FDM275-O Radio fire detection system Multihop mesh technology High transmission reliability thanks to the use of independent communication paths transmission
More informationFDBZ290 Air sampling smoke detection kit
FDBZ290 Air sampling smoke detection kit Sinteso Cerberus PRO Reliable monitoring for smoke of supply air, exhaust air and recirculation ducts of air conditioning and ventilation systems Suitable for air
More informationONYXWORKS AND FIRSTVISION. Version 4
ONYXWORKS AND FIRSTVISION Version 4 Version 4: Next Generation CONNECTED SOLUTIONS ONYXWorks FirstVision 2 ONYXWORKS Version 4 New to ONYXWorks v4.30 Look Ahead Test Monitoring Configuration Tool Display
More informationFC724 Fire control panel
FC724 Fire control panel Series FS720 (IP4) Cerberus PRO Compact, prefabricated microprocessor-controlled fire control panel for the connection of up to 504 addresses Fire control panel can be used as
More informationFDCIO223 (ES 45) Transponder
FDCIO223 (ES 45) Transponder Addressed (FDnet/C-NET) Sinteso Cerberus PRO 2 monitored inputs/outputs, which can optionally be used as a detector line (collective Siemens/Cerberus, Synova 600, or collective
More informationFDS229-R / FDS229-A Alarm sounder with supplementary optical indication
FDS229-R / FDS229-A Alarm sounder with supplementary optical indication For the automatic addressable detector bus C-NET and FDnet Cerberus PRO Sinteso Alarm sounder with 11 tonalities selectable, 2 activation
More informationOutput module (230 V)
Cerberus FIT Output module (30 V) FCA109-Z1 Output module for use in monitored output lines Output with potential-free relay contacts for controlling fire ventilators, air conditioning systems, elevators,
More information