TEST REPORT No

Size: px

Start display at page:

Download "TEST REPORT No"

Tobias Davis
5 years ago
Views:

Istituto Giordano S.p.A. Via Gioacchino Rossini, 2-47814 Bellaria-Igea Marina (RN) - Italia Tel. +39 0541 343030 - Fax +39 0541 345540 istitutogiordano@giordano.it - www.giordano.it PEC: ist-giordano@legalmail.

1 Istituto Giordano S.p.A. Via Gioacchino Rossini, Bellaria-Igea Marina (RN) - Italia Tel Fax istitutogiordano@giordano.it - PEC: ist-giordano@legalmail.it Cod. Fisc./Part. IVA: Cap. Soc i.v. R.E.A. c/o C.C.I.A.A. (RN) Registro Imprese di Rimini n TEST REPORT No Place and date of issue: Bellaria-Igea Marina - Italia, 18/12/2018 Customer: IDECO ARIGIRIS PAPADOPOULOS INDUSTRIAL S.A. - Egnatia Odos Veria-Thessaloniki km 10,000 - Veria, IMATHIA - Greece Date testing requested: 09/10/2018 Order number and date: 78085, 09/10/2018 Date sample received: 09/03/2018 Date of testing: 06/12/2018 Purpose of testing: testing the wind resistance of an insect screen door according to standard UNI EN 1932:2013 with test parameters and results evaluation according to standard UNI EN 13561:2015 Place of testing: Istituto Giordano S.p.A. - Strada Erbosa Uno, Gatteo (FC) - Italia Origin of sample: sampled and supplied by the Customer Identification of sample received: No. 2018/0517 Name of sample* The test sample is named SCREEN DOORS (1000x2100). (*) according to that stated by the Customer. Comp. MB Revis. PB This test report consists of 5 sheets. CLAUSES: This document relates only to the sample or material tested and shall not be reproduced except in full without Istituto Giordano s written approval. Sheet 1 of 5

consists of an insect screen door, nominal size 1400 mm 2200 mm.

2 (Test report No dated 18/12/2018) sheet 2 of 5 follows Description of sample* The sample under test consists of an insect screen door, nominal size 1400 mm 2200 mm. The sample basically is composed by: aluminum profiles; automatic return; magnet-assisted fastening; curtain, with stated openness coefficient Co 65%. Photograph of the sample. (*) according to that stated by the Customer.

3 (Test report No dated 18/12/2018) sheet 3 of 5 follows Normative references Testing was carried out according to the following standards: UNI EN 13561:2015 dated 09/07/2015 Tende esterne e tendoni - Requisiti prestazionali compresa la sicurezza ( External blinds and awnings - Performance requirements including safety ); UNI EN 1932:2013 del 18/07/2013 Tende e chiusure oscuranti esterne - Resistenza al carico del vento - Metodo di prova e criteri di prestazione ( External blinds and shutters Resistance to wind loads Method of testing and performance criteria ). Test apparatus Testing was carried out using the following equipment: measure and control computerized semiautomatic system with differential pressure transducers; Mitutoyo Corporation digital meter model TD-S551D , full scale 5500 mm (in-house apparatus code: FT364). Test methods The sample does not exactly match any type of tent defined in standards UNI EN 13561:2015 and UNI EN 1932:2013. Considering its configuration, the test was then performed in accordance with clause 7.4 Awnings with lateral guiderail without fabric running into the lateral rails and without tension system of standard UNI EN 1932:2013 and with clause 4.1 Resistance to wind loads of standard UNI EN 13561:2015, using the test loads for the reference class in clause 4.1 of standard UNI EN 13561:2015. The sample was tested to determine the wind load resistance using method 3: applying a direct nominal pressure p S, for at least 2 min, defined as p S =p N-Co>20% γ where: p N = threshold value of nominal test pressure, in N/m 2, corresponding to the class considered in accordance with table 1 of standard UNI EN 13561:2015; Co = openness coefficient of the fabric; γ = 1,2 (coefficient of transition from the nominal loads to the safety loads;

4 (Test report No dated 18/12/2018) sheet 4 of 5 follows releasing and inspecting; applying reverse safety pressure -p N, for at least 2 min, releasing and inspecting. The drop test was not performed since it was not feasible because of the conformation of the sample. Environmental conditions at the time of testing Room temperature (19 ± 1) C Relative humidity (56 ± 5) % Test results Load method* 3 Width L 1,000 m Height H 2,100 m (*) according to clause 5 of standard UNI EN 1932:2013. Wind load resistance test. Applied load Side* Result** [Pa] 46 outer complying (*) The sample has been tested only on one side because it is statically symmetrical. (**) According to clause Performance criteria of standard UNI EN 1932:2013 there shall be no: - tearing in fabric; - breakage (stitching, guiding pins..); - permanent deformations (profiles, rails, roller tube..); - exit from guide rails.

standards UNI EN 13561:2015 and UNI EN 1932:2013, the test sample, comprising an insect screen door, called SCREEN DOORS (1000x2100) and

IGIRIS PAPADOPOULOS INDUSTRIAL S.A. - Egnatia Odos Veria-Thessaloniki km 10,000 - Veria, IMATHIA - Greece, results to belong, according to clause 4.

Test type Test reference Class reference Class wind load resistance UNI EN 1932:2013 UNI EN 13561:2015 3 The results given refer exclusively to

5 (Test report No dated 18/12/2018) sheet 5 of 5 follows Findings On the basis of the test performed, on the basis of the results obtained and based on standards UNI EN 13561:2015 and UNI EN 1932:2013, the test sample, comprising an insect screen door, called SCREEN DOORS (1000x2100) and submitted by the company IDECO ARIGIRIS PAPADOPOULOS INDUSTRIAL S.A. - Egnatia Odos Veria-Thessaloniki km 10,000 - Veria, IMATHIA - Greece, results to belong, according to clause 4.1 of standard UNI EN 13561:2015, to the performance class specified in the following table. Test type Test reference Class reference Class wind load resistance UNI EN 1932:2013 UNI EN 13561: The results given refer exclusively to the test sample itself and are only valid under the same conditions in which testing was carried out. This test report alone shall not be considered a certificate of conformity. Test Technician (Dott. Ing. Paolo Bertini) Head of Security and Safety Laboratory (Dott. Andrea Bruschi) Chief Executive Officer The original of this document consists of an electronic document digitally signed pursuant to the applicable Italian legislation.

TEST REPORT No

TEST REPORT No Istituto Giordano S.p.A. Via Gioacchino Rossini, 2-47814 Bellaria-Igea Marina (RN) - Italia Tel. +39 0541 343030 - Fax +39 0541 345540 istitutogiordano@giordano.it - www.giordano.it PEC: ist-giordano@legalmail.it