Rocker/Paddle Switches, A Series, Part Number Matrix
|
|
- Willa Allen
- 5 years ago
- Views:
Transcription
1 Rocker/Paddle Switches, Series, Part Number Matrix MTERIL SPECIICTIONS: Contacts/Terminals...Gold/gold flash Silver/tin lead Case Material...Thermoset 9V-0 ctuator Material...Polyamide Terminal Seal...Epoxy ENVIRONMENTL SPECIICTIONS: Operating Temperature...- to +8 (-0 C to +8 C) Storage Temperature...-9 to + (- C to +00 C) ICL PERORMNCE CHRCTERISTICS: Contact Rating...Gold: 0. 0 C/DC 0 VC 0 VDC Initial Contact Resistance...0 Milliohms max. Contact Timing...Break-before-make Insulation Resistance..., VDC Dielectric Strength...,000 Volts sea level ctuator Travel... Life Expectancy...Up to 0,000 Cycles DESIGN PRT NUMBERING Beveled ctuator rame Model unction ctuator Terminal Contact Color Color Option Single Pole Double Pole 0 On-On 0 0 On-Off-On (On)-Off-(On) Rocker J Small J Large J Snap-in J Snap-in w/beveled frame J0 Snap-in J Snap-in w/beveled J frame Snap-in w/beveled frame LED Paddle J Small J Large J Large J0 Snap-in J Snap-in w/beveled frame Z Wire Lug Right ngle V Vert. Right ngle C Printed Circuit V Vertical Right ngle V V Vertical Support Bracket W Z Wire Wrap Quick Connect Q Silver B Gold G Gold over Silver 0 Black (Std.) Red 0 Black (Std.) OPTIONL: UL recognized under the Component Program of Underwriters Laboratories Inc. ile # E7 CS Certified ile #LR90 UL (Q or G) contacts only J Snap-in w/beveled frame & LED 7
2 Rocker/Paddle Switches, Series, Options UNCTIONS The following functions available in SP or DP. LCO LCO LCO 0 Positions None indicates no mechanical position On None On 0 Positions Off indicates a mechanical position with no electrical connection. On Off On 0 Positions (On) indicates momentary operation. (On) Off (On) SPDT, connect terminals: DPDT, connect terminals: CTUTORS J Rockers Small Mounting Type Standard with C or Z Terminal Type J Large. (9.).. (.8).7 (.99).97.0 (.8).7 (.9).90 (.0). (.8).0 (7.87).7 (9.).0 (0.).0 (.00).8 (.) (.8).09 (7.8).09 (.9).707 (7.9).7 (.9).97 (.80.8 (0.).9 (.).0 (8.).8 (9.7).8 (.).8 (.) Mounting Type Standard with C or Z Terminal Type 8
3 Rocker/Paddle Switches, Series, Options.7 (.07).07 (.0).0 (.).9 (7.9).00 (.7) R. MX. ROCKER Snap-in.7 (8.) Panel Opening PNEL THICKNESS.0-. (.8-.8) Panel Thickness "" (.). (.).090 (.9).80 (7.).00 (.7) R. MX. Snap-in with beveled frame.7 (9.) Panel Opening PNEL THICKNESS.07-. (.9-.8) Panel Thickness "" (7.9). (.) ccepts BL-7 or equivalent LED Panel Opening.98 (.0).8 (.).090 (.9) LED snaps securely into frame. Height depends on LED used..80 (7.).80 (7.) PNEL THICKNESS.07-. (.9-.8).0 (.) LCO Marking This Side. (8.7).0 (.).00 (0.) MX. Snap-in with beveled frame/l.e.d. L.E.D. Not supplied. Panel Thickness "" (.99). R. (8.).8 (.).09 (.9) PDDLE Small. (9.) (.).707 (7.9).97.. (.9).70 (8.80).0 (.0).8 (0.) Mounting Type Standard with C or Z Terminal Type. 9
4 Rocker/Paddle Switches, Series, Options J J.0 (.8) J LRGE.8 J LRGE.8. (.7).7 (.9).87 (.7).87 (.7).09 (7.8).7 (.9) Mounting Type Standard with C or Z Terminal Type..9 (.).7 (9.8).0 (0.).09 (.).0 (0.).00 R. (.7).8 (.) PNEL OPENING J J Snap-In Snap-in with beveled frame J.90 (.).07 (.). (8.9) J. (.).00 (.).090 (.9).7 (8.) PNEL OPENING.90 (.).70 (7.9).98 (.0).00 R, (.7).890 (0.). PNEL THICKNESS.07- (.9-.8). PNEL THICKNESS.07- (.9-.8) ).7 (9.) J0 Snap-in. Snap-in with J (. beveled frame (.. (.8). (.9).07 (.).090 (.9).80 (7.) PNEL THICKNESS.07 TO (.9) (.8).9 (7.9) PNEL THICKNESS.0- (.7-.8).00 MX..00 (.7)R. MX..7 (9.).7 (8.). (. (..7 (.07) Panel Opening Panel Thickness "" Panel Opening Panel Thickness "" (8.7) (.70 0 J.0 (.).00 (.7) MX. Snap-in. (.) with beveled frame/led ccepts BL-7 or equivalent LED L.E.D. not supplied.00 (7.9).98 (.0) LED snaps securely into frame. Height depends on LED used (.9).80 (7.). (7.) (.8).0 (.) PNEL THICKNESS.07- (.9-.8) LCO MRKING THIS SIDE.00 (7.9). (.). (8.7) (.70.0 (.).00 (.7) MX..98 (.0) Panel Opening LED secu fram dep LE Panel Thickness ""
5 Rocker/Paddle Switches, Series, Termination Options TERMINLS Z Wire Lug Standard Quick Connect W Wire Wrap C Printed Circuit Epoxy Seal.07 (.9).080 (.00).00 (.7) THK..078 (.98).078 (.98). (.9) EPOXY SEL.0 (.7).00 (.7) THK. Mates with MP or (.) Epoxy Seal.70 (9.0).00 Epoxy Seal.00.0 (.).89 (.80).8 (.70).8 (.70).07 (.8) SINGLE POLE.07 (.8) DOUBLE POLE Right ngle Single Pole.08 (.).00 (.08) Pivot.9 (.9).0 (.08) Epoxy Seal.0 (.7).0 (.8) (.8) (.7) NOTE: Terminal numbers viewed from top of P.C. board..8 (.70).8 (.70).07 (.8) Dia..00 (.08) Right ngle Double Pole.08 (.).00 (.08) Pivot.9 (.9).0 (0.) Epoxy Seal.00.8 (.70).00 (0.7) (.8).8 (.70).00 (.08).0 (.8).07 (.8) Dia. NOTE: Terminal numbers viewed from top of P.C. board.
6 Rocker/Paddle Switches, Series, Options Vertical Right ngle Single Pole.00 EPOXY SEL.00 (.) (0.7).08. (.7) (.97).70 (.8).0 (0.).0 (.8).07 (.8).00 (.08).9 (.9).00 NOTE: Terminal numbers viewed from top of P.C. board..0 (.08) EPOXY SEL. (.8).00 (0.7).70 (.8).08 (.).07 (.8).0 (.8).0 (.).00 (.08) Right ngle Double Pole V.00.0 (0.) V Vertical Support Bracket Single Pole Vertical Support Bracket Double Pole.00 (0.7). (.97) EPOXY SEL.00 (.). (.).00 (.08).8 (.70). (.).08 (.7) (.08).8 (.70).00.0 (.7).0 (.7).90.0 (.8).00 (.08) NOTE: Terminal numbers viewed from top of P.C. board. EPOXY SEL.00 (.7) EPOXY SEL.00 (.7).07 (.8).08 (.).08 (.).0 (8.).0 (9.).08 (.).8 (.70).00 (.8).8 (.70) (.8).9 (.9).0 (0.).0 (.7).0 (.7).00 (0.7) (.8) EPOXY SEL. (.8) (9.0).07 (.8) (.8).70 (9.0).07 (.8).07 (.8).0 (.8).00.0 (.) Option Code Dim."" V.0 (.8) V.0 (.00) Option Code.00 (.08).90 Dim."" V.0 (.8) V.0 (.00) CONTCTS B CONTCTS: Copper alloy with gold plate, welded button. Q TERMINLS: Copper alloy wtih gold plate. ELECTRICL RTING: 0 VC/DC. CONTCTS: Copper alloy with silver, welded button. TERMINLS: Copper alloy wtih tin/lead plate. ELECTRICL 0 0 VDC. UL/CS 0 VC (Specify "UL" option code) CONTCTS: Copper alloy with gold plate G over silver, welded button. TERMINLS: Copper alloy wtih gold plate. ELECTRICL RTING: 0. 0 VC/DC 0 0 VDC. Note: This contact option can be used for low-level or power switching. If level is above 0. 0 VC/DC, the switch is rendered usable only for power switching due to arc-removal of gold plate. UL/CS 0 VC (Specify "UL" option code)
7 * Refer to Pages 7 for Product Specifications and Part Matrix SPDT 0JVQO. (.8) o. (7.90).00. (.00) Rocker Switches, Series, PC Tail, Straight or Vertical Right ngle.70 (9.0) EPOXY SEL.0 (0.80).00 (.).0 (.8) (.8).08 (.7).0 (0.0).00 (.08). (9.0). (.7) (.8).0 (.8).00 (.08) DPDT 0JVQO Standard Rocker Color - (Black) SPDT DPDT 0JCQO 0JCQO Standard Rocker Color - (Black).0 (0.0). (.8). (9.). o.0 (7.87).8 (9.80). (9.0).0 (0.).7 (.98).00 (.0) (9.0).09 (.8) PLCS (.0).00 (.08).00.0 (.).00 (0.80).8 (.70) EPOXY SEL.07 (.8) DI.0 (.8).00 (.0) (.8). (9.). (.8).00 (.08) Tyco Electronics lcoswitch Type ct. Code. P. M -79-0JVQ0 SPDT On None On JVQ0 SPDT (On) Off (On) JVQ0 DPDT On None On JVQ0 DPDT (On) Off (On).8 (.70).7 (.98) (.8) DI.09 (.8) PLCS (.70).07 (.8) Tyco Electronics lcoswitch Type ct. Code. P. M -79-0JCQ0 SPDT On None On JCQ0 SPDT (On) Off (On) JCQ0 DPDT On None On 0JCQ0 DPDT On Off On 0JCQ0 DPDT (On) Off (On)
8 Rocker Switches, Series, Wire Lug or Right ngle SEE PGE 7 OR PRODUCT SPECIICTIONS ND PRT MTRIX. (.8).0 (0.0).70 (9.0). (.9).7 (.98).70 (.8) SPDT o. (9.) (7.87).8 (9.80).8.00 (0.80).8 (.70) EPOXY SEL..09 (.0) PLCS..080 (.00) 0JZQO.7 (.98).00 (.00) DPDT. (9.).97 Standard Rocker Color - (Black) Tyco Electronics lcoswitch.08 (.).00 (.08) Type ct. Code. P. M JZQ0 SPDT On None On JZQ0 SPDT On Off On JZQ0 SPDT (On) Off (On).0.8 (.00) (.80).9 (.0) PIVOT.890 (.) RE. EPOXY. SEL (.7).0 (.7) (.8) (.0) PLCS.. (8.80).080 (.00) Tyco Electronics lcoswitch.8 (.70).0 (0.80).90 (.80) Type ct. Code. P. M JZQ0 DPDT On None On JZQ0 DPDT On Off On JZQ0 DPDT (On) Off (On).8 (.70).07 (.8).00 (.08) 0JZQO 0JQO SPDT. (.8) o.0 (7.87).9 (.9).00 (.).0 (8.89).0 (0.0).0 (8.89).00 (0.7).0 (.8).00 (.08).8 (.70) (.8).08 (.).07 (.8).8 (.70).0 (.80).00 (.08) 0JQO DPDT Standard Rocker Color - (Black) Tyco Electronics lcoswitch Type ct. Code. P. M JQ0 SPDT On None On -79-0JQ0 SPDT (On) Off (On) Tyco Electronics lcoswitch Type ct. Code. P. M JQ0 DPDT On None On JQ0 DPDT On Off On 0JQ0 DPDT (On) Off (On)
9 * Refer to Pages 7 for Product Specifications and Part Matrix Paddle Switches, Series, Wire Lug or Right ngle SPDT.7 (7.0). (9.).70 (9.9).09 Dia. (.0) PLCS (0.0).08 (.).70 (8.7).70 (9.0). (.9).8 (.70) EPOXY SEL.00 (0.80). (.70).080 (.00). (.0).89 (.80).00 (.0).080 (.00) 0JZQO DPDT SPDT DPDT Standard Paddle Color - (Black) 0JZQO Tyco Electronics lcoswitch Type ct. Code P. M Tyco Electronics lcoswitch Type ct. Code P. M JZQ0 SPDT On None On JZQ0 DPDT On None On JZQ0 SPDT On Off On 0JZQ0 DPDT On Off On -79-0JZQ0 SPDT (On) Off (On) JZQ0 DPDT (On) Off (On).08 (.).08 (.).00 (.08). (.0).00 (.08).7 (.) RE..0.8 (0.0) (.80).9 (.9) PIVOT.7 (.) RE..9 (.9) PIVOT EPOXY. SEL (.7).0 (.7).0 (0.0).00 EPOXY SEL (.8).0 (.7).00.0 (.8). (8.80).8 (.70).0 (0.80).00 (.00).8 (.70).0 (0.80).8 (.70).8 (.70).07 (.8).00 (.08).0 (.80).07 (.8).00 (.08) SPDT / DPDT 0JQ0 Standard Paddle Color - (Black) Tyco Electronics lcoswitch Typect. Code P. M Tyco Electronics lcoswitch Type ct. Code P. M 0JQ0 SPDT On None On 0JQ0 DPDT On None On 0JQ0 SPDT On Off On 0JQ0 DPDT On Off On -79-0JQ0 SPDT (On) Off (On) 0JQ0 DPDT (On) Off (On)
10 Paddle Switches, Series, PC Tail, Straight or Vertical Right ngle SEE PGE 7 OR PRODUCT SPECIICTIONS ND PRT MTRIX SPDT / DPDT 0JVQO.0 (0.0).00 (.08).0 (0.0).00 (.08). (9.0). (9.0).00 (.0).00. (.7).00. (.0).0 (.8).0 (.8).07 (.8).00 (.08).07 (.8) (.8).00 (.08). R. (8.) o.08 (.0).70 (8.7).00. (.00).70 (9.0) EPOXY SEL.0 (0.80).0 (.8).00 (.) (.7).08 (.7) SPDT Standard Paddle Color - (Black) Tyco Electronics lcoswitch Type ct. Code P. M JVQ0 SPDT On None On -79-0JVQ0 SPDT (On) Off (On). (9.)..7 (.98) (.8) DI PLCS. R (8.) o.08 (.0).0 (0.).70 (8.7) Tyco Electronics lcoswitch Type ct. Code P. M.70 (9.0) 0JVQ0 DPDT On None On.8.0 (.).00 (0.80).8 (.70) EPOXY SEL.70 (.8) (.8) DI.8 (.70) DPDT 0JCQO..7 (.98). (9.) (.8) DI PLCS. R (8.) o.08 (.0).0 (0.).70 (8.7).70 (9.0).0 (.).8.00 (.70) (0.80).8 EPOXY SEL (.0).90 (.8).07 (.8) DI.8 (.70).90 (.8) 0JCQO Tyco Electronics lcoswitch Type ct. Code P. M 0JCQ0 SPDT (On) Off (On) 0JCQ0 SPDT (On) Off (On) Tyco Electronics lcoswitch Type ct. Code P. M JCQ0 DPDT On None On JCQ0 DPDT (On) Off (On)
11 Rocker/Paddle Switches, E Series, Process Sealed, Part Number Matrix MTERIL SPECIICTIONS: Terminal Seal...Epoxy (standard) Process Sealing...Seals will withstand wave soldering and subsequent cleaning operations. Contact/Terminals...Gold/gold flash over tin/lead Silver/tin lead Case Material...Thermoplastic ctuator Material...Polyamide ENVIRONMENTL SPECIICTIONS: Operating Temperature...- to +8 (-0 C to +8 C) Storage Temperature...-9 to + (- C to +00 C) Meets MIL-STD-0, method C, Test Condition & D 8 C. ICL PERORMNCE CHRCTERISTICS: Contact 0 VC 0 VDC Gold: 0. 0 VDC max. Contact Resistance...0 Milliohms max. initial Insulation Resistance...,000 Megohms 00 VDC. Dielectric Strength...,000 Volts sea level initial Static Withstanding...KV Per IEC 80-. Electrical Life...Up to 0,000 Cycles ctuator Travel... Contact Timing...Break before make DESIGN PRT NUMBERING ctuator Model unction ctuator Terminal Contact Color Option E Single Pole E Double Pole 0 On-On 0 On-Off-On 0 (On)-Off-(On) Rocker J Standard J0 Small Paddle J Standard J0 Small Z V C V V Wire Lug Right ngle Vert. Right ngle Printed Circuit Vertical Right ngle V W Wire Wrap Vertical Support Bracket B Gold Q Silver G Gold over Silver 0 Black (Std.) Red UL (Q or G) contacts only Z Quick Connect U.L. vailable upon request OPTIONL: UL recognized under the Component Program Underwriters Laboratories Inc. ile #E7 CS Certified ile #LR90 7
12 Rocker/Paddle Switches, E Series, Process Sealed, Options UNCTIONS The following functions available in SP or DP. LCO LCO LCO 0 Positions None indicates no mechanical position On None On 0 Positions Off indicates a mechanical position with no electrical connection. On Off On 0 Positions (On) indicates momentary operation (On) Off (On) SPDT, connect terminals: DPDT, connect terminals: J Rocker J Paddle Mounting Provided with C or Z Terminal Type..0 (7.87). (.9). (8.)R. (.9). (.87).99 (7.9).08 (.).70 (8.8)..0 (7.77). (9.9).0 (.8).09. (.8).0 (.8)R.80 (7.). (.). (0.97) CTUTORS Mounting Provided with C or Z Terminal Type. J0 Rocker J0 Paddle. Mounting Provided with C or Z Terminal Type. Mounting Provided with C or Z Terminal Type. 8
13 Rocker/Paddle Switches, E Series, Process Sealed, Termination Options Z Wire Lug EPOXY SELED.07 (.9).078 (.98).078 (.98).080 (.0).080 x.00 THK. (.0) (.7). (.9) W C Quick Connect Wire Wrap Printed Circuit EPOXY SELED.0 (.7).0 (.).00 (.7) THK..0 x.00 THK. (.7) (.7) EPOXY SELED.00 x.00 THK. (.7) (.7).70 (9.0).00 EPOXY SELED.00 x.00 THK. (.7).0.89(.) (.80).00 TERMINLS.8 (.70).8 (.70).07 (.8).07 (.8) Right ngle Single Pole Right ngle Double Pole Vertical Right ngle.08 (.).08 (.) (.08).00 (.08).9 (.9).0 (.0).9 (.9).0 (0.).0.00 (.). (.97) EPOXY SEL NOTE: Terminal numbers viewed from top of P.C. board..00 (.7).0 (.8) (.7) EPOXY SEL (.7) EPOXY SEL.00 (.).08 (.7).70 (.8).0 (.) NOTE: Terminal numbers viewed from top of P.C. board..8 (.70).8 (.70) (.8) (.8).00.8 (.70) SINGLE POLE.00 (.08).0 (.8).0 (.8).07 (.8).00 (.08).0 (.8).07 (.8).00 (.08) SINGLE POLE DOUBLE POLE.8 (.70).07 (.8).07 (.8).00 (.08) DOUBLE POLE Vertical Right ngle Single Pole Vertical Right ngle Double Pole.00 (.7).00 (.08) POS. POS. POS. POS. POS. POS..00 (.7).7 (.7).7 (.7).0 (.).00 (.7).0 (.).00 (.7) EPOXY SEL (.8).0 (.8) EPOXY SEL (.8).0 (.8).70 (.8).00 (.08) (.) (..8).0 (.8).0 (.).00 (.08).0 (.8).00 (.08).0 (.).07 (.8).07 (.8) 9
14 Rocker/Paddle Switches, E Series, Process Sealed, Options V Vertical Support Bracket Single Pole.70 (.).00 (.08).8 (.70).0 (.7) EPOXY SEL.00 (.7).08 (.).8 (.70) (.8).00.0 (8.).0 (.7) (.8).70 (9.0).07 (.8) Option Code Dim."" V.0 (.8) V.0 (.00) Vertical Support Bracket Double Pole CONTCTS.70 (.).00 (.08).8 (.70).0 (.7) Epoxy Seal.00 (.7).08 (.) (.8).0 (8.).8 (.70).0 (.7) (.8).70 (9.0).07 (.8) Option Code Dim."" V.0 (.8) V.0 (.00) B CONTCTS: Copper alloy with gold plate, welded button. TERMINLS: Copper alloy with gold plate. ELECTRICL RTING: 0 VC/DC. CONTCTS: Copper alloy with Q silver, welded button. TERMINLS: Copper alloy wtih tin/lead plate. ELECTRICL RTING: VC, 0 VC, 0 VDC. UL/CS 0 VC (Specify "UL" option code) CONTCTS: Copper alloy with gold plate over silver, G welded button. TERMINLS: Copper alloy wtih gold plate. ELECTRICL RTING: 0. 0 VC/DC or VC, 0 VC, 0 VDC. Note: This contact option can be used for low-level or power switching. If level is above 0. 0 VC/DC, the switch is rendered usable only for power switching due to arc-removal of gold plate. UL/CS 0 VC (Specify "UL" option code) 0
DIP Switches Series. Performance Characteristics Series. Materials. Technical Documents
lcoswitch DIP switches are available in standard single pole, single throw; side actuated, single pole, single throw and multiple series versions. Contacts are made of high strength copper alloy with.000030
More informationSWK1323AL101 H2 Keylock
Keylock 2SWK Series - Page 2 SKF Series - Page 4 SKT Series - Page 3 SWK Series - Page 5 Keylock Part Number Index 2SKF131AEL01 4 2SKF132AEL01 4 2SKF133AEL01 4 2SKF231AEL01 4 2SWK131AL101 2 2SWK132AL101
More informationPushbutton Switches. Nylon. Specifications. Heavy Duty, Metal Plunger. Specifications S13 S12
Nylon S13.250 (6.35).375 (9.35) Dia Heavy Duty 6 Wire Leads Both Bushing & Bracket are Made of Nylon.565 (14.35) 1.000 (25.4).250 (6.35) Travel.540 (13.72) Dia.776 (19.71) 1.120 (28.45) 1.308 (33.22).540
More informationCII FCAC-150 Series Relay
Introducing CII Series Relay 50 Amps, 1PST/NO (DM) CII Series Relay 50 Amps, 1PST/NO (DM) with 1PDT Auxiliary Contacts KEY FEATURES Non-latching relay Balanced force design Corrosion protected metal enclosure
More informationSwitch Basics and Applications
Switch Basics and Applications Introduction Basic Switch Types and Applications Switch Function - Mechanical Poles and Throws, Mechanical Characteristics Switch Function - Electrical Voltage and Current
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height mm inch Connector Description
More informationJan05 Rev A EC
Product Specification Two Circuit Heavy Duty Burner Connector 108-1056 12Jan05 Rev A EC 0990-0059-05 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the
More information6600 SERIES 8-Pin DIP, Subminiature Bimetal Disc Thermostat
6600 SERIES 8-Pin DIP, Subminiature Bimetal Disc Thermostat Introduction The Airpax 6600 series is a RoHS compliant, positive snap action, single pole / single throw, sub-miniature bimetallic thermostat
More informationTwo Circuit Heavy Duty Burner Connector
Product 108-1056 11 Oct.16 Rev B Specification EC 0990-0059-05 Two Circuit Heavy Duty Burner Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the
More informationBattery Interconnects
Battery Interconnects Product Facts Total interface solution Current capacity 7 Amps/ single contact at 30 C T-Rise Choice of right-angle or vertical mount headers with left, right or keyless polarization
More informationtemperature Controllers
temperature Controllers Bulb and Capillary Thermostats Thermostat Styles and Selection Construction Characteristics This type of control operates by expansion and contraction of a liquid in response to
More informationSCREWPLUG HEATERS. immersion heaters
SCREWPLUG HETERS SCREWPLUG HETERS OVERVIEW WTTCO screwplug heaters are comprised of hairpin tubular elements that are brazed or welded into a machined pipe thread fitting, which are then screwed directly
More informationMICRO SWITCH NT Series
Flat Base Toggle Switch DESCRIPTION Honeywell MICRO SWITCH NT Series toggle switches meet the need for a rugged, cost-effective toggle switch. Quality construction features include a seal between the toggle
More informationThermostat Catalog 2004
1 C 1 R 5 6 8 1 R R 6 1 k 5 C 4 1 0 0 p F 9 5 6 7 1 0 1 1 D I D I C D A E C + A E C - V E E V E E D O D O O E M 1 4 1 2 3 C 3 6 + - 5 2 Qo- 3 Q1+ Thermostat Catalog 2004 2 1 2 1 1 3 T1 2-1 - 6W 6 5 4 R
More informationMICRO SWITCH. Pushbutton Switches Line Guide FEATURES MICRO SWITCH. PUSHBUTTON SWITCHES PB Series. Features: Compact size Up to four
MICRO SWITCH Pushbutton Switches Line Guide Pushing industry innovation. Honeywell Sensing and Control (S&C) is the global leader in switching products. So you can be sure we offer the most comprehensive
More informationScrewplug Heaters. Type CX. Screwplug Heaters Type CX. Operation. Application. Selection. Terminal Block Simplifies Wiring. Warning - Fire Hazard
Screwplug Heaters Screwplug Heaters pplication Screwplug heaters are primarily used to heat liquids in tanks or vessels. To do so safely and reliably requires that the heating elements remain fully immersed
More informationHelically wound resistance wire coil made
Ceramic Insulated CHANNEL STRIP HEATERS A Reliable Heat Source with Seamless Stainless Steel Sheath For Flat Surface Mounting Installations, Used in Hundreds Of Industrial and Commercial Heating Applications...
More informationMICRO SWITCH Basic Switches Line Guide
MICRO SWITCH Basic Switches Line Guide The switch is on. Simple, superior, durable, and irreplaceable even by 21st-century standards, the MICRO SWITCH technology cycles on. Today, Honeywell Sensing and
More informationB C D. Strip Heaters. Channel Strip Heaters Ceramic Insulated. To order, call or shop online at omega.com SM
Ceramic Insulated A Reliable Heat Source with Seamless Stainless Steel Sheath Flat Surface Mounting Installations Used in Hundreds of Industrial and Commercial Heating Applications Typical Applications
More informationB C D. Strip Heaters. Channel Strip Heaters Ceramic Insulated. To order, call or shop online at omega.com SM
Ceramic Insulated A Reliable Heat Source with Seamless Stainless Steel Sheath Flat Surface Mounting Installations Used in Hundreds of Industrial and Commercial Heating Applications Typical Applications
More informationElectronic Control Pushbutton
Electronic Control Pushbutton INCANDESCENT OR NON-LIGHTED DISPLAY Buttons ordered separately. AML21 Series Electrical Data page 19 Buttons page 43 Lamps and LEDs page 58 Accessories pages 56, 57 Mounting
More informationFree Height 0.8 mm Pitch Board-to-Board Connector (SMT)
Product 108-5390 Specification 31 OCT 17 Rev.F1 Free Height 0.8 mm Pitch Board-to-Board Connector (SMT) 1. SCOPE 1.1. Contents This specification covers the requirements for product performance, test methods
More informationMICRO SWITCH NT Series
Step Base Toggle Switch DESCRIPTION Honeywell MICRO SWITCH NT Series toggle switches meet the need for a rugged, cost-effective toggle switch. Quality construction features include a seal between the toggle
More informationFlange Heaters Type CX
pplication Flange heaters are used to heat liquids or gases in tanks or in-line vessels. Safe and reliable service from the heater requires the correct selection of materials and heating element watt density.
More informationHow 1 is your resistance. wire sized? What grade of magnesium oxide is being used? How 3 is your cold pin attached to your resistance wire?
PDS QUALITY On first impression, various manufacturers of screw plug immersion heaters appear to be all alike; but when you take a closer look at screw plug immersion heaters, it becomes evident that considerable
More informationSpecification Status: Released
PGE NO.: 1 OF 5 PIN CONFIGURTION ND DESCRIPTION: Specification Status: Released Pin Configuration (Bottom View of ) (Top View of ) 2 хххх C (Side View of ) Note: 2 is product code хххх is Batch Code P1
More information135'c " Conduit, 6-#3, 12-#4 Wires Rated-50% 45'c 345'w. 1" Conduit, 3-#4 3.43%VD. 66'c 411'w 4.08%VD. Wires Rated-50% 77'c. 421'w 14 4.
,, Panelboard NEM R enclosure. 90 positions 18K breakers Extend existing concrete base per base details. Paint panel very dark green which is close to the panel across the street. Use existing meter. 58'
More informationBEHIND THE PANEL AML s simple, cost effective design provides many behind-panel benefits for the designer and installer/user.
Advanced Manual Line IN FRONT OF THE PANEL Coordinated, attractive appearance. AML features innovations designed by industrial designers to achieve the best balance of human factors and aesthetic appearance.
More informationMICRO SWITCH Basic Switches Line Guide
MICRO SWITCH Basic Switches Line Guide The switch is on. Simple, superior, durable, and irreplaceable even by 21st-century standards, the MICRO SWITCH technology cycles on. Today, Honeywell Sensing and
More informationInverted Through Board Surface
Inverted Through Board Surface Application Specification Mount Technology (SMT) 114-13245 Connector Assembly 14 DEC 09 Rev E NOTE i All numerical values are in metric units [with U.S. customary units in
More informationJun08 Rev C
Product Specification Connector, Card Edge,.050 Centerline 108-14034 02Jun08 Rev C 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for Tyco Electronics.050 centerline
More information1009 Series Transformer Mounted Secondary LV Bushings
9 Series Transformer Mounted Secondary LV ushings. kv, kv IL (ir/oil) onductivity: 99.99 % urrent Rating: to mp (Max) Use: 9 Series Transformer Mounted LV ushings are designed for use as secondary bushings
More informationIssue 1. MICRO SWITCH Rocker Switches TP Series. Datasheet FEATURES DESCRIPTION POTENTIAL APPLICATIONS PORTFOLIO VALUE TO CUSTOMERS
MICRO SWITCH Rocker Switches TP Series DESCRIPTION Honeywell MICRO SWITCH TP rocker switches are designed for flush mount to the panel for a low profile button or above panel for a distinctive button appearance.
More informationMODEL KP-200 VANDAL RESISTANT & WEATHERPROOF FLUSH MOUNT DIGITAL KEYPAD DESIGNED FOR ACCESS CONTROL APPLICATIONS
MODEL KP-200 VANDAL RESISTANT & WEATHERPROOF FLUSH MOUNT DIGITAL KEYPAD DESIGNED FOR ACCESS CONTROL APPLICATIONS OPERATES ON 12 OR 24 VOLTS AC/DC, AUTO VOLTAGE SENSING FULLY PROGRAMMABLE FROM THE KEYPAD
More informationLevel V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline
Level V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline Product Facts Termination of discrete wire sizes 26-22 AWG [0.12-0.3 mm 2 ] as well as jacketed cable and bonded ribbon cable (conductors separated)
More informationPipe Thread Heaters. Construction Features. Star Electric to Order Call " 2-1/2" Pipe Thread Heaters
Pipe Thread Heaters Construction Features " -/" Pipe Thread Heaters Element bends repressed uniformly to insure electrical insulation integrity. One piece forging hex, thread and riser assures reliability.
More informationRUE Selection Guide and Product Data. RUE Selection Guide
Selection Guide and Product Data This section has two parts: A Selection Guide that walks you through the process of selecting the correct RUE device for a circuit. Product Data that outlines electrical
More informationRF one-step BNC/TNC connectors for coaxial cable termination
Easy, quick installation Outstanding cable-retention force Solder-solder connection type (center conductor and braid) RF one-step BNC/TNC connectors for coaxial cable termination Applications RF one-step
More informationThermostat Catalog 2004
1 C 1 R 5 8 1 R R 1 k 5 C 4 1 0 0 p F 9 5 7 1 0 1 1 D I D I C D A E C + A E C - V E E V E E D O D O O E M 1 4 1 2 3 C 3 + - 5 2 Qo- 3 Q1+ Thermostat Catalog 2004 2 1 2 1 1 3 T1 2-1 - W 5 4 R 3 1 0 0 R
More informationThermo-Platens. Cast-In Aluminum and Bronze Platen Die Heaters for Plastics Processing Equipment
Cast-In Aluminum and Bronze Platen Die Heaters for Plastics Processing Equipment Cast-In Platen Heaters are widely accepted as the industry standard for heating critical, temperaturesensitive plastics
More informationPOINT HELIDECK LIGHTS PRL-LSM LED LOW SURFACE MOUNT LIGHT
Compliances: ETL Listed to UL 98 US & CSA C22.2 No..-4 Canada ETL Listed to UL 98A Marine Vessels IMO 9 MODU Code () paragraph 13.. FAA AC /39-2B Heliport Design Guide ICAO Annex 14, Volume II UK CAA CAP
More informationInstallation S19-324D1. Class I, Division 1, Groups C & D Explosion Proof. Emergency Signaling System
Installation S19-324D1 Class I, Division 1, Groups C & D Explosion Proof Emergency Signaling System Table of Contents Pre-Installation Information... 2-3 ssembly of Components...4 Install the Flow Switch
More informationUser's Manual: Series 260A Model 260A Process Current Loop-Powered Alarm
User's Manual: Series 260A Model 260A Process Current Loop-Powered Alarm Table of Contents Page Introduction 1 Description 1 Specifications 2 Installation 3 Calibration 4 General Maintenance 5 List of
More informationPipe Thread Heaters. Construction Features. 1" 2-1/2" Pipe Thread Heaters
Construction Features 1" 2-1/2" Pipe Thread Heaters Element bends repressed uniformly to insure electrical insulation integrity. One piece forging of hex, thread and riser assures reliability. Element
More informationPOINT HELIDECK LIGHTS PRL-LSM LED v4 LOW SURFACE MOUNT LIGHT
Compliances: ETL Listed to UL 1598A Marine Vessels at -40 deg C to +55 deg C ETL Listed to CSA C22.2 No. 137-M1981 & No. 250.0-08 Canada ETL Listed to UL 1598 at -40 deg C to +55 deg C IMO 2009 MODU Code
More information3NT SERIES FIXED TEMPERATURE THERMOSTATS Introduction
3NT SERIES FIXED TEMPERATURE THERMOSTATS Introduction Automatic reset thermostat designed to meet your specific application requirements. Its patented and tamper proof snap action bi-metal disc provides
More informationGuide Specification Model CTG Automatic Transfer Switch
Guide Specification Model CTG Automatic Transfer Switch PART 1 GENERAL 1.1 Scope A. It is the intent of this specification to secure a transfer switch that has been prototype tested, factory built, production
More informationPOINT HELIDECK LIGHTS PRL-LSM LED v4 LOW SURFACE MOUNT LIGHT
Compliances: ETL Listed to UL 1598A Marine Vessels at -40 deg C to +55 deg C, IP66 & IP67 ETL Listed to CSA C22.2 No. 137-M1981 & No. 250.0-08 Canada ETL Listed to UL 1598 at -40 deg C to +55 deg C IMO
More informationIntroducing Hermaphroditic Blade and Receptacle Connector
Introducing Hermaphroditic Blade and Receptacle Connector Wire-to-Board, Board-to-Board and Dust Cover Hermaphroditic Blade and Receptacle Connector : Wire-to-Board KEY FEATURES Available in 2, 4, and
More informationSECTION AUTOMATIC TRANSFER SWITCHES
SECTION 26 36 23 AUTOMATIC TRANSFER SWITCHES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. General provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationMICRO SWITCH E6/V6 Series
MICRO SWITCH E6/V6 Series Enclosed Basic Switch DESCRIPTION MICRO SWITCH BZE/DTE enclosed basic switches offer enhanced precision operation and sturdy actuation in a compact but rugged metal housing. The
More informationPRODUCT SPECIFICATION. 0.5mm Fine Stacking. Hermaphroditic Type BTB Connector
PRODUCT SPECIFICATION 108-115057 29OCT13 Rev. A1 0.5mm Fine Stacking Hermaphroditic Type BTB Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for 0.5mm
More informationProduct Specification JUL07 Rev. F. 1. Scope : 2. Applicable Documents: 3. Requirements : 1 of Contents. 2.1 AMP Specifications :
1. Scope : 1.1 Contents 11JUL07 Rev. F DDR S.O.DIMM Socket 200 Positions This specification covers the requirements for product performance, test methods and quality assurance provisions of DDR S.O.DIMM
More informationSafety & Security. Smoke Detectors & Fire Alarm Systems. Intrusion Alarms Video Security Access Controls
Safety & Security Smoke Detectors & Fire Alarm Systems Intrusion Alarms Video Security Access Controls C&K is a market leader and has a long history supplying high performance, reliable switches to the
More information7800 SERIES 22-Terminal Universal Subbase
7800 SERIES 22-Terminal Universal Subbase FEATURES PRODUCT DATA Q7800B003/2003/U Metal Wall-mount subbase Q7800A005/2005/U Plastic Wall-mount subbase Quick-mount wiring subbase for all 7800 SERIES Relay
More information2408/2900. Fire Guard
2408/2900 Fire Guard Table of Contents Features and Additional Fire Opening Devices... 1 2408 Single-Point Hold Open Applications and Mounting Details... 2 2408 Track Assemblies, Arms and Components...
More informationPOINT HELIDECK LIGHTS PRL-EX-LSM LED v4 CLASS I, DIVISION 2 & ZONE 2
Compliances: ETL Listed Class I, Division 2, Groups A B C D, T6 at -40 deg C to +55 deg C ETL Listed Class I, Zone 2, Groups IIA, IIB+H2, IIC T6 at -40 deg C to +55 deg C ETL Listed to UL 844 & UL 1598
More informationAPPLICATIONS. Wireless Communications systems. (LAN, GSM, PCS, WCDMA, UMTS) Remote measuring equipment
RoHS Ready UMCC Ultraminiature Coax Connector & Cable Assembly Series DESCRIPTION Tyco Electronics introduces the Ultraminiature Coax Connector and Cable Assembly series products. The UMCC series is an
More informationSpecifications. STEALTH Simplex, Wall Mount For SGV, OGP & OGV Grinder Pumps Control Panels & Accessories.
Specifications STELTH Simplex, Wall Mount For, OGP & OGV Grinder Pumps Control Panels & ccessories GENERL: wall mounted control panel shall be supplied with each station. ll control panels shall be UL
More informationFEB. 17 Rev. A1
Product Specification 108-94552 10 FEB. 17 Rev. A1 The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore, TE Connectivity
More information2408/2900. Fire Guard. SARGENT Manufacturing Company 2004, 2007 All rights reserved
Fire Guard SARGENT Manufacturing Company 2004, 2007 All rights reserved Fire Guard Table of Contents Features and Additional Fire Opening Devices............................1 2408 Single-Point Hold Open
More informationTemperature Controllers
Model TEC-4100 1/4 DIN Model TEC-4100 1/4 DIN Temperature Controller Ordering Code: Power Input BOX 1 4 = 90-250 VAC 5 = 11-26 VAC / VDC TEC-4100- Configurable for 4 Programmable Outputs and NEMA 4X/IP65
More informationVIKING RANGE CORPORATION, P.O. DRAWER 956, GREENWOOD,MS USA
VIKING RANGE CORPORATION, P.O. DRAWER 956, GREENWOOD,MS 38930 USA TABLE OF CONTENTS VDSC ( Dual fuel ) / VESC (Electric) RANGES / VERT (Rangetop) COMPONENTS AND FUNCTIONAL PARTS: Control / Timer ------------------------------------------------------------------------------------------------------
More informationy Small dimensions. Easy to install in refrigerated counters or cold rooms
MAKING MODERN LIVING POSSIBLE Data sheet Thermostat Type KP The KP Thermostats are temperaturecontrolled electrical switches. All KP Thermostats have a single pole double throw (SPDT) changeover switch.
More informationCHECK NEW PRODUCTS SECTION FOR NEW INNOVATIVE SOLUTIONS
CHECK NEW PRODUCTS SECTION FOR NEW INNOVATIVE SOLUTIONS Table of Contents - Electronic Access & Releasing Devices Pushbutton Access Release Devices................ H1-H8 620/631 Series Heavy Duty Pushbuttons
More informationCertificate of Compliance
Certificate of Compliance Certificate: 2595099 (LR 7189-177) Master Contract: 164196 Project: 2697346 Date Issued: January 28, 2014 Issued to: Tyco Electronics Corporation 2901 Fulling Mill Rd Mail Stop
More informationMICRO SWITCH Sealed and High Accuracy Switch Line Guide
MICRO SWITCH Sealed and High Accuracy Switch Line Guide Engineered smarter. Basically better. Honeywell Sensing and Control (S&C) offers an impressive collection of environmentally sealed limit switches
More information2-Stage 4 K Closed Cycle Refrigerator Systems
2-Stage 4 K Closed Cycle Refrigerator Systems Variable Temperature Closed Cycle Refrigerator Systems Cryo Industries manufactures closed cycle cryogenic workstations for a large variety of experimental
More informationPYXIS U PYXIS U. rcgroupairconditioning
Industrial : Packaged air cooled liquid chillers for outdoor installation equipped with scroll compressors and microchannel condensing coils Cooling capacity: 44 284 rcgroupairconditioning MIN FETURES
More information5BT SERIES -65 F to 400 F, SPDT, Welded, Hermetically Sealed ½
5BT SERIES -65 F to 400 F, SPDT, Welded, Hermetically Sealed ½ Introduction The Klixon 5BT series thermostat is a high reliability, hermetically sealed thermal switch. The single pole, double throw design
More informationUSB 3.0 Plug & Receptacle
US 3.0 Plug & Receptacle 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods and quality requirements of Tyco Electronics Universal Serial us (US) consortium
More informationSide Entry Insulation Damage Repair Sleeve (SEIDRS) Raychem Devices Products
1.0 Scope This specification covers the design, performance and qualification requirements for Raychem Side Entry Insulation Damage Repair Sleeve. 1.1 Description. Raychem SEIDRS covered by this specification
More informationRevisions to this application specification include: Updated document to corporate requirements Changed product types in table in Figure 6
This specification covers the requirements for application of PLASTI GRIP Terminals and Splices for commercial applications. The terminals and splices consist of precision formed metal wire barrel insulated
More informationASME Packaged Indirect Fired Water Heater
Features Reliable Only high grade materials used in construction to ensure long operating life Hydrastone cement lining provides superior protection and tank longevity Heavy duty construction withstands
More informationUnderstanding Etched Foil Flexible Heaters
Understanding Etched Foil Flexible Heaters J. Stopperan, Business Development All Flex Flexible Circuits and Heaters May 4, 2012 Flexible heaters is a product family that generically describes thin and
More informationThe Sub-Mini Hermet. OEM Pressure Switches Sub-Mini-Hermet and Omni
OEM Pressure Sub-Mini-Hermet and Omni Factory Set Sub-Mini-Hermet The Sub-Mini Hermet has the ability to be externally adjusted without disconnecting electrical service or tamperproof. These field mounted
More informationTechnical Instructions Document No P25 ET September 28, ET 141 Electric Surface Mounted Thermostat.
Document No. 155-018P25 ET 141-1 ET 141 Electric Surface Mounted Thermostat Description This electric surface mounted thermostat has a Single-Pole, Double-Throw (SPDT) contact mechanism and is designed
More informationReleasing System Peripherals
UL, ULC Approved* Releasing System Peripherals Fire Suppression System Abort Switches and Releasing Appliance Circuit (RAC) Maintenance Switches Features Abort switches provide a manual Fire Suppression
More informationGLIDER EVO FREE GLIDER EVO FREE GLYCOL FREECOOLING. rcgroupairconditioning
: Packaged air cooled liquid chillers with free-cooling system for outdoor installation, equipped with screw compressors and axial fans Cooling Capacity: 314 1343 Free-Cooling Capacity: 308 938 GLYCOL
More informationPOWER AND CONTROL PRODUCTS QUICK RESPONSE PROGRAM.
POWER AND CONTROL PRODUCTS QUICK RESPONSE PROGRAM. CUSTOM CONFIGURED PRODUCTS READY FOR SHIPMENT IN ONE TO TEN BUSINESS DAYS. Appleton s Quick Response Program places select power and control products
More informationPOINT ROLLOVER LIGHTS PRL LED HELIPORT INSET LIGHT
Compliances: ETL Listed to UL 98 ETL Listed to UL 98A Marine Vessels ETL Listed to CSA C22.2 No..-4 Canada FAA AC /39-2B Heliport Design Guide ICAO Annex 14, Volume II UK CAA CAP 437, Chapter 4, paragraph
More informationSolderSleeve Insulated Electrical Termination Devices
Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RT-1404 ISSUE 9 April 20, 2000 ISSUE 8 1.0 INTRODUCTION SolderSleeve Insulated Electrical
More informationSiBar Thyristor Surge Protectors. TVBxxxRSC-L Series. Benefits: Features: Applications:
Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction.
More informationVAMP 120 & 121. Arc flash detection units. Product picture
Arc flash detection units VAMP 120 and 121(D) are extremely fast arc flash detection units for LV and MV switchgear and controlgear. The units are especially designed to increase the safety and to minimize
More informationSiBar Thyristor Surge Protectors. TVBxxxNSA-L Series. Benefits: Features: Applications:
Raychem Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction.
More information2-Stage 4 K Closed Cycle Refrigerator Systems
CRYO 2-Stage 4 K Closed Cycle Refrigerator Systems Variable Temperature Closed Cycle Refrigerator Systems Cryo Industries manufactures closed cycle cryogenic workstations for a large variety of experimental
More informationSLATE. Base Module INSTALLATION INSTRUCTIONS R8001A1001
SLATE Base Module R8001A1001 INSTALLATION INSTRUCTIONS Scan for more information Application SLATE brings configurable safety and programmable logic together into one single platform. The platform can
More informationTable of Contents Auxiliary Locks
Copyright 2007-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company
More informationInstruction Manual Model A
706 Bostwick Avenue, Bridgeport, CT 06605 TEL: 203-368-6751 FAX: 203-368-3747 1-800-566-6822 www.devarinc.com Instruction Manual Model 18-232A LOOP POWERED ALARM MANUAL NO. 990029 MODEL 18-232A LOOP POWERED
More informationDESIGN GUIDELINES SPLIT TYPE AIR TO AIR HEAT PUMPS PAGE 1 of 6
DESIGN GUIDELINES SPLIT TYPE AIR TO AIR HEAT PUMPS PAGE 1 of 6 1.1. REFERENCE STANDARDS 1.2. GENERAL 1.1.1. The units shall be listed by Electrical Testing Laboratories (ETL) and bear the ETL label. 1.1.2.
More informationMar11 Rev C
Product Specification 108-1441 11Mar11 Rev C Connector, Z-PACK*, 2 mm FB, Signal and Power 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the Z-PACK* 2mm
More informationSiBar Thyristor Surge Protectors. TVBxxxSA-L Series. Benefits: Features: Applications:
Raychem Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction.
More informationHPNLS-RT. Installation Manual
Installation Manual WARNING: Do not lift fixture by cables. This could result in permanent damage to both the fixture and the cables. Damage resulting from grasping cables and/or putting undue pressure
More informationIntroduction. Technical Features
Introduction Powertrain Systems Chassis Systems Safety Systems Security Body Driver Information Convenience The AMPSEAL 16 Connector System is targeted for off-road and heavy duty industrial applications.
More informationFR/SR Series. Full Sized, Sealed Rocker Switches SR SERIES FR SERIES DESCRIPTION FR SERIES SR SERIES FEATURES FR SERIES SR SERIES
FR/SR Series Full Sized, Sealed Rocker Switches FR SERIES SR SERIES DESCRIPTION FR SERIES The FR Series illuminated and non-illuminated full size sealed rocker switches offer enhanced design flexibility
More informationMICRO SWITCH Cable-Pull Safety Switches CPS Series Issue 3. Datasheet FEATURES DESCRIPTION POTENTIAL INDUSTRIAL APPLICATIONS
MICRO SWITCH Cable-Pull Safety Switches CPS Series DESCRIPTION Honeywell s MICRO SWITCH CPS Series Cable-Pull Safety Switches provide a readily accessible emergency stop signal, a cost-effective means
More informationTubular Heaters Rev 4 ( ) Finned Tubular Heaters. Finned Tubular Heaters. View Product
Shown with optional bulkhead fittings Shown with optional mounting flange at end of sheath Design Features Copper brazed steel fins on steel sheath standard. Aluminum based protective coating available.
More informationINSTALLATION INSTRUCTIONS FOR MOUNTING KIT
RV Products Division INSTALLATION INSTRUCTIONS FOR 8330-5501 MOUNTING KIT 8330-752 CONTROL BOX KIT (12 VDC COOL ONLY) 9330B755 CONTROL BOX KIT (12 VDC HEAT/COOL) 8530-750 CONTROL BOX KIT (24 VAC COOL ONLY)
More informationelectric immersion heaters
C70-7 electric immersion heaters electric heating and controls Table Contents Selection Guide... - Quick Ship Pipe Thread Heaters... - Construction Features... Pipe Thread Heaters... -/ Pipe Thread Heaters...
More informationPackaged Steam Fired Water Heater
MODEL ST Packaged Steam Fired Water Heater Utilizes Steam To Heat Domestic Water, Semi-Instantaneous or Storage Type Heaters Features Reliable Packaged System Only high grade materials used in construction
More information