SiBar Thyristor Surge Protectors. TVBxxxSA-L Series. Benefits: Features: Applications:
|
|
|
- Daniel Thompson
- 6 years ago
- Views:
Transcription
1 Raychem Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction. These devices have a high electrical surge capability to help protect against transient faults and a high off-state impedance, rendering them virtually transparent during normal system operation. SiBar thyristor surge protectors are designed to assist telecommunication and computer telephony equipment in meeting the applicable requirements and industry specifications. Benefits: Features: RoHS compliant Helps provide protection for sensitive telecom electronic equipment Low leakage current Low power dissipation Fast, reliable operation No wear-out mechanisms Helps designers meet worldwide telecom standards Helps reduce warranty and service costs Easy installation Helps improve power efficiency of equipment Bidirectional crowbar transient voltage protection Broad voltage range 58V 300V with improved Vdrm/Vbo voltage range High off-state impedance Low on-state voltage High surge capability Short-circuit failure mode Surface-mount technology DO-214AA SMB package 10 x 1000 μs 50A surge rating Helps equipment comply with TIA-968, Telcordia GR-1089, IEC , ITU K.20/21/45 Applications: Modems Fax machines Set top boxes POS systems Phones, answering machines Analog and digital linecards (xdsl, T1/E1...) PBX systems Other customer premise and central office network equipment requiring protection 2009 Tyco Electronics Corporation. All rights Reserved. 1 Rev: C Date: SEPTEMBER 29, 2009
2 Table SB1 - Electrical Characteristics Part Number V DM Max. (V) V BO Max. (V) I H Min. (ma) V T Max. (V) C1 (Typ) 50V DC Bias C2 (Typ) 2V DC Bias Off-State Current VD2=VDM (μa) TVB058SA-L TVB170SA-L TVB180SA-L (Max) 60 (Max) 5 TVB200SA-L TVB270SA-L TVB300SA-L Notes: All electrical characteristics are measured at 25 C. VDM measured per UL497B pulse requirements: at max. off-state leakage current (IDM) = 5 µa. VBO measured at 100V/µs. C1 measured at 1 MHz with a 50 VDC bias. C2 measured at 1MHz with a 2V DC bias. Table SB2 Surge Current Rating Part Number TIA-968 Telcordia GR-1089* IEC ITU K.20/21/45* Type A 5 x 320 µs Type B pp (A) 10 x 560 µs 10 x 160 µs 10 x 1000 µs 2 x 10 µs 8 x 20 µs I PP (A) 5 x 310 μs (VOC: 10 x 700μs) I TSM Min. (A) di/dt dv/dt (A/µs) (V/µs) TVBxxxSA-L Notes: *Lightning current wave forms for applicable industry specification. ITSM, peak on-state surge current is measured at 60 Hz, one cycle. di/dt: critical rate-of-rise of on-state current (pulsed power amplifier Vmax = 600V; C = 30µF). dv/dt: critical rate-of-rise of off-stage voltage (linear wave form, VD = rated VBO, Tj = 25 C 2009 Tyco Electronics Corporation. All rights Reserved. 2 Rev: C Date: SEPTEMBER 29, 2009
3 Table SB3 s in Millimeters A B C D Min. Max. Min. Max. Min. Max. Min. Max TVBxxxSA-L (0.160) (0.180) (0.130) (0.155) (0.075) (0.095) (0.077) (0.087) H J K P S Min. Max. Min. Max. Min. Max. Ref Min Max. TVBxxxSA-L (0.002) (0.008) (0.006) (0.012) (0.030) (0.050) (0.202) (0.205) (0.220) Notes: *D dimension is measured within dimension P. TVB series devices use industry standard SMB package type. All devices are bidirectional and may be oriented in either direction for installation Table SB4 Physical Characteristics and Environmental Specifications Lead material Matte tin finish (-L devices) Encapsulating material Epoxy, meets UL94V-0 requirements Solderability per MIL-STD-750, Method 2026 Solder heat withstand per MIL-STD-750, Method 2031 Solvent resistance per MIL-STD-750, Method 1022 Mechanical shock per MIL-STD-750, Method 2016 Vibration per MIL-STD-750, Method 2056 Storage temperature ( C) -55 to 150 Operating temperature ( C) -40 to 125 Junction temperature ( C) 175 Maximum Lead Temperature for Soldering Purpose; for 10s ( C) 260 Table SB5 Reliability Tests Test Conditions Duration High temperature, reverse bias +100 C, 50VDC bias 1000 hours High humidity, high temperature, reverse bias 85% RH, +85 C, 50VDC bias 1000 hours High temperature storage life +150 C 1000 hours Temperature cycling -65 C to +150 C, 15 minute dwell 1000 cycles Autoclave 100% RH, +121 C, 15 PSI 96 hours 2009 Tyco Electronics Corporation. All rights Reserved. 3 Rev: C Date: SEPTEMBER 29, 2009
4 2009 Tyco Electronics Corporation. All rights Reserved. 4 Rev: C Date: SEPTEMBER 29, 2009
5 Table SB6 Packaging and Marking Information Part Description Tape and Reel Quantity Standard Package Part Marking Recommended Pad Layout (millimeters/inchs) A (Nom.) B (Nom.) C (Nom.) TVB058SA-L 2,500 10, A (0.089) (0.085) (0.108) -- TVB170SA-L 2,500 10, A (0.089) (0.085) (0.108) UL TVB180SA-L 2,500 10, A (0.089) (0.085) (0.108) UL TVB200SA-L 2,500 10, A (0.089) (0.085) (0.108) UL TVB270SA-L 2,500 10, A (0.089) (0.085) (0.108) UL TVB300SA-L 2,500 10, A (0.089) (0.085) (0.108) UL * UL497B, File # E Agency Recognition* 308 Constitution Drive, MS R21/2A Tel (800) Menlo Park, CA USA (650) (Chinese) Fax (650) (Japanese) Raychem, PolySwitch, SiBar, TE Logo and Tyco Electronics are trademarks. All other trademarks and copyrights are property of their respective owners Tyco Electronics Corporation. All rights Reserved. 5 Rev: C Date: SEPTEMBER 29, 2009
SiBar Thyristor Surge Protectors. TVBxxxNSA-L Series. Benefits: Features: Applications:
Raychem Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction.
SiBar Thyristor Surge Protectors. TVBxxxRSC-L Series. Benefits: Features: Applications:
Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction.
PolySwitch TS600 Overcurrent Protection Devices
R PolySwitch TS600 Overcurrent Protection Devices New surface-mount products for overcurrent protection Raychem introduces the PolySwitch TS600 series to protect sensitive telecommunications equipment
Gas Discharge Tubes GTCX25-XXXM-R02 Series
Raychem Circuit Protection 5mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission lines
Gas Discharge Tubes GTCX28-XXXM-R05 Series
GTCX28-XXXM-R05 Series Raychem Circuit Protection Products 8mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal
Telecom Fuses. Benefits. Features. Applications
Telecom Fuses The FT600 fuse series is designed to assist telecommunications equipment manufacturers in complying with North American overcurrent protection requirements, including Telcordia GR- 1089,
Gas Discharge Tubes. Features: Benefits: Applications:
TE Circuit Protection 5mm 3Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission lines from
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. GENERAL DESCRIPTION The ROV14-XXX (Radial-leaded Metal Oxide Varistor) products
DATASHEET PolySwitch RKEF Devices
DTSHEET PolySwitch Devices For use in a wide variety of general electronic products, ranging from industrial controls to battery packs, PolySwitch devices are functionally equivalent to the PolySwitch
Specification Status: Released
PAGE NO.: Page 1 of 5 Specification Status: Released BENEFITS Silicon ESD device in an EIA-0402 size rectangular passive component SMT package Standard PCB assembly and rework processes Bi-directional
Raychem Overvoltage Devices. ROV05, ROV05H 5mm Series Metal Oxide Varistors
Document: SCD Rev. A June 30, 003 GENERAL DESCRIPTION The ROV0-XXX (Radial-leaded Metal Oxide Varistor) products are mm radial leaded varistor devices suitable for protection of overvoltage transients.
Specification Status: Released
PAGE NO.: 1 OF 5 GENERAL DESCRIPTION BENEFITS Specification Status: Released Helps provide overvoltage fault protection against high energy surges Suitable for sensitive equipment due to excellent impulse
Raychem Overvoltage Devices. ESD Protector PESD BENEFITS FEATURES APPLICATIONS MATERIALS INFORMATION PART NUMBERING.
BENEFITS Suitable for high speed data transmission applications Longer battery life due to low leakage current Board space savings Help protect sensitive electronic circuits against electrostatic discharge
RUE Selection Guide and Product Data. RUE Selection Guide
Selection Guide and Product Data This section has two parts: A Selection Guide that walks you through the process of selecting the correct RUE device for a circuit. Product Data that outlines electrical
Raychem Overvoltage Devices. ROV14, ROV14H, ROV14E 14mm Series Metal Oxide Varistors
GENERAL DESCRIPTION The ROV14-XXX (Radial-leaded Metal Oxide Varistor) products are 14mm radial leaded varistor devices suitable for protection of overvoltage transients. ROV devices can provide protection
PolySwitch Telecommunications and Networking Resettable Devices
Telecommunications and Networking PolySwitch Telecommunications and Networking Resettable Devices PolySwitch devices for telecommunication and networking applications were initially designed over ten years
Specification Status: Released
PAGE NO.: 1 OF 6 GENERAL DESCRIPTION BENEFITS Specification Status: Released Helps provide overvoltage fault protection against high energy surges Suitable for sensitive equipment due to excellent impulse
Specification Status: Released
PAGE NO.: 1 OF 8 Specification Status: Released Not to be used for new designs. For new design please contact Tyco Electronics Sales BENEFITS Board space savings Help protect sensitive electronic circuits
Multi Layer Varistor Overvoltage Protection Device
GENERAL DESCRIPTION PAGE NO.: 1 OF 5 These s are small, leadless, surface mount packages made of multiple layers of Zinc Oxide, with electrodes between them. They are used to help protect integrated circuits
PolySwitch Telecommunications and Networking Resettable Devices
Telecommunications and Networking PolySwitch Telecommunications and Networking Resettable evices PolySwitch devices for telecommunication and networking applications were initially designed over ten years
and Product Data VTP Selection Guide
Selection Guide and Product Data This section has two parts: A Selection Guide that walks you through the process of selecting the correct VTP device for a circuit. Product Data that outlines electrical
PolySwitch Surface-mount Resettable Devices
PolySwitch Surface-mount Resettable evices Surface-mount More than ten years ago, Raychem ircuit Protection introduced the SM product family, and polymeric PT devices quickly became the computer industry
Environmental. Electrical Specifications at 25 O C TYPE HL E Output Constant Current. Output Voltage Range
LED Optimized Drivers Model: Series Environmental 40W Designed for use with Triac or ELV Phase Dimmers 120Vac or 230Vac/240Vac. 120Vac Version can be used without dimmer 120/208-277Vac Drive Mode: PFC
M7100 Pressure Transducer
SPECIFICATIONS Performance standard on and off highway engine and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless steel wetted surfaces
Environmental. Electrical Specifications at 25 O C TYPE HL E Output Constant Current
LED Optimized Drivers 6 Watt Series Model: Series Environmental 6W Designed for use with Triac or ELV Phase Dimmers 120Vac or 230Vac/240Vac. 120Vac Version can be used without dimmer 120/208-277Vac Drive
Free Height 0.8 mm Pitch Board-to-Board Connector (SMT)
Product 108-5390 Specification 31 OCT 17 Rev.F1 Free Height 0.8 mm Pitch Board-to-Board Connector (SMT) 1. SCOPE 1.1. Contents This specification covers the requirements for product performance, test methods
D5100 Industrial Differential Pressure Transducer
FEATURES Heavy Industrial CE Approval (amplified only) As Low As ±0.1% Pressure Non Linearity Rugged Construction: Can Withstand 50g Shock/20g Vibration Up to -40 C to +125 C Operating Temperature Range
D5100 Industrial Differential Pressure Transducer
SPECIFICATIONS 316L Stainless Steel Wetted Surface Voltage, Current, and mv Outputs True Wet/Wet Differential CE Certified (amplified version only) Variety of Pressure Ports and Electrical Connections
Product Specification JUL07 Rev. F. 1. Scope : 2. Applicable Documents: 3. Requirements : 1 of Contents. 2.1 AMP Specifications :
1. Scope : 1.1 Contents 11JUL07 Rev. F DDR S.O.DIMM Socket 200 Positions This specification covers the requirements for product performance, test methods and quality assurance provisions of DDR S.O.DIMM
CII FCAC-150 Series Relay
Introducing CII Series Relay 50 Amps, 1PST/NO (DM) CII Series Relay 50 Amps, 1PST/NO (DM) with 1PDT Auxiliary Contacts KEY FEATURES Non-latching relay Balanced force design Corrosion protected metal enclosure
Technical Data Sheet 1.6mm Side Looking Phototransistor
Technical Data Sheet 1.6mm Side Looking Phototransistor Features Fast response time High sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Descriptions
Technical Data Sheet 1.5mm Side Face Infrared LED
Technical Data Sheet 1.5mm Side Face Infrared LED Features High reliability High radiant intensity Peak wavelength λp=940nm 2.54mm Lead spacing Low forward voltage Pb free This product itself will remain
1N4001 THRU 1N4007 1N4001 THRU 1N SILICON RECTIFIER. Features:
Features: 4001 THRU 4007 1.0 SILICON RECTIFIER Diffused Junction Low Forward Voltage Drop High Current Capability High Reliability High Surge Current Capability This is a Pb Free Device All SMC parts are
RoHS. Ready. KILOVAC LEV100 Series 900 Vdc Contactor DESCRIPTION KEY FEATURES
KEY FEATURES Hermetically sealed intrinsically safe. Operates in explosive/harsh environments without oxidation or contamination of contacts, including long periods of non-operation 8kV isolation between
Technical Data Sheet 3mm Phototransistor T-1
Technical Data Sheet 3mm Phototransistor T-1 Features Fast response time High photo sensitivity Pb free The product itself will remain within RoHS compliant version. PT24-6C Descriptions PT24-6C is a high
EMI Filter (Data Line) TRIGON COMPONENTS. Dimensions Table (mm)
FEATURES No polarity due to symmetrical currentvoltage characteristics Excellent electro static absorption capability Fast Respond Low Leakage Current Bi-directional RoHS Compliant APPLICATIONS USB3.0
SPECIFICATION AND PERFORMANCE MDP CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE OF MDP CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 of 16 CLAUSE CONTENTS PAGE 1.0 SCOPE... 3 2.0 APPLICABLE DOCUMENTS... 3 3.0
FEATURES ORDERING CODE EMCP C 100 N T (1) (2) (3) (4) (5) (6) (7) SMT Multilayer EMI Filter (Power Line) TRIGON COMPONENTS
FEATURES No polarity due to symmetrical currentvoltage characteristics Excellent electro static absorption capability Fast Respond Low Leakage Current Bi-directional RoHS Compliant APPLICATIONS USB3.0
Technical Data Sheet 5mm Phototransistor T-1
Technical Data Sheet 5mm Phototransistor T-1 Features Fast response time High photo sensitivity Pb free This product itself will remain within RoHS compliant version. Descriptions is a high speed and high
PRODUCT SPECIFICATION. 0.5mm Fine Stacking. Hermaphroditic Type BTB Connector
PRODUCT SPECIFICATION 108-115057 29OCT13 Rev. A1 0.5mm Fine Stacking Hermaphroditic Type BTB Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for 0.5mm
Wire and Cable. For more information on these Tyco Electronics products, visit the following website:
26 Wire and Cable Raychem High Performance Wire and Cable....26-2 to 26-4 Madison Cable Products...................26-5 to 26-7 Reference the following cables in Section 15 of this catalog: Premises Networking
A214B/SUG/S400-X6 LAMP. Features. Description. Applications. Revision 1. Expired Period: Forever. LifecyclePhase: Low power consumption
Features Low power consumption High efficiency and low cost Good control and free combinations on the colors of LED lamps Good lock and easy to assembly. Stackable and easy to assembly Stackable vertically
Technical Paper. PPTC Circuit Protection for Power Management in Portable Communications/PDA Equipment
Technical Paper PPTC Circuit for Power Management in Portable Communications/PDA Equipment PPTC Circuit for Power Management in Portable Communications/PDA Equipment Frank Owen - Marketing Director Raychem
ULTRA FAST RECITIFIERS
Applications: 4001 4007 ULTRA FAST RECITIFIERS 4001 4007 Switching Power Supply Power Switching Circuits General Purpose Features: The plastic package carries Underwriters Laboratory Flammability Classification
AO Annunciator Module
General Specifications GS48C43Z01-00E-N AO-543-01 Annunciator Module GENERAL Figure 1 This module has two independent annunciator circuits. The circuits handle fault signals and operator actions (acknowledge,
IEC UC3 compliant (short current 3,000 A) 1 Form A 120A power latching relays
To Be Discontinued IEC62055-31 UC3 compliant (short current 3,000 A) 1 Form A 120A power latching relays DZ RELAYS (ADZ) New New Horizontal terminal type FEATURES 1. IEC62055-31 UC3 compliant (short current
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60747-15 First edition 2003-06 Discrete semiconductor devices Part 15: Isolated power semiconductor devices Dispositifs à semiconducteurs Partie 15: Dispositifs à semiconducteurs
M5200 Industrial Pressure Transducer
SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof UL Certified Gage, Sealed, Compound
Technical Data Sheet 5mm Infrared LED, T-1
Technical Data Sheet 5mm Infrared LED, T-1 Features High reliability 2.54mm lead spacing Low forward voltage Good spectral matching to Si photodetector Pb free The product itself will remain within RoHS
SMD 2121 Black Frame MC-S2121BHA
SMD 2121 Black Frame MC-S2121BHA 1. SPECIFICATIONS 1.1 Absolute Maximum Ratings (Ta=25 C) Item Symbol Absolute Maximum Rating Red Green Blue Unit Forward Current I F 30 30 30 ma Pulse Forward Current I
Used as indicators of indicating the Degree, Functions, Positions etc, in electronic instruments
Features Low power consumption High efficiency and low cost Good control and free combinations on the colors of LED lamps Good lock and easy to assembly. Stackable and easy to assembly Stackable vertically
SPECIFICATIONS. US0603YG LED Chip 0603 Yellow Green SWISSDIS. Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern
SWISSDIS Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern Tel.: +41 62 919 44 00 Fax: +41 62 919 44 01 info@swissdis.ch www.swissdis.ch SPECIFICATIONS US0603YG LED Chip 0603 Yellow Green Version December 2015
SURFACE MOUNT LED 405 nm, 1206 UV IL PACKAGE
SURFACE MOUNT LED 405 nm, 1206 UV IL PACKAGE SM1206UV-405-IL Industry Standard 1206 Package RoHS Compliant UV Emitting LED Water Clear Lens Narrow Viewing Angle Ideal for Curing, Detection, and Medical
VAMP 120 & 121. Arc flash detection units. Product picture
Arc flash detection units VAMP 120 and 121(D) are extremely fast arc flash detection units for LV and MV switchgear and controlgear. The units are especially designed to increase the safety and to minimize
HTF3000LF PVH-3.3 TEMPERATURE AND HUMIDITY MODULE
TEMPERATURE AND HUMIDITY MODULE Compliant with RoHS recommendations Based on the rugged HS1101LF humidity sensor, HTF3000LF PVH-3.3 is a dedicated humidity and temperature transducer designed for OEM applications
Inverted Through Board Surface
Inverted Through Board Surface Application Specification Mount Technology (SMT) 114-13245 Connector Assembly 14 DEC 09 Rev E NOTE i All numerical values are in metric units [with U.S. customary units in
PCB Relays Single Relays
Features Small power relay Limiting continuous current 30 A Minimal weight Low noise operation Wave (THT) and reflow (THR/pin-in-paste) solderable versions For twin version refer to Double Micro Relay
PolySwitch Surface-Mount Resettable Fuses
PolySwitch Surface-Mount Resettable Fuses New surface-mount products reduce the footprint and extend the operating range of the broadest product line of surface-mount resettable fuses Raychem, inventor
Installation Instructions for the
Installation Instructions for the Basic Board Mount Pressure Sensors TBP Series, Compensated/Unamplified 60 mbar to 10 bar 6 kpa to 1 MPa 1 psi to 150 psi Issue F GENERAL INFORMATION Honeywell s Basic
M5800 Pressure Transducer with Rotatable Display
Pressure Transducer with Rotatable Display SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and customized Electrical Configurations FEATURES CE Compliance Reverse Polarity Protection
DP86 Constant Voltage with Fitting
SPECIFICATIONS 316L SS Wet/Wet Differential Low Pressure 0 100mV Output The DP86 constant voltage with fitting differential pressure sensor is a double-sided, media compatible, piezoresistive silicon pressure
SPECIFICATIONS FOR REFOND SURFACE MOUNT LED
SPECIFICATIONS FOR REFOND SURFACE MOUNT LED Model: RF-WNB190DS-DC Company Name: Confirmed By Customer: DATE: Feature Viewing angle:140 deg The materials of the chip is InGaN 1.60mm 0.80mm 0.70mm SMT-LED
Solid State Relays SOLITRON MIDI Current Sensing Type RJCS, RJCSR
Solid State Relays SOLITRON MIDI Current Sensing Type, R AC semiconductor contactor Integrated current monitoring Zero switching (1A) Direct copper bonding (DCB) technology LED-indication Cage clamp output
Installation Instructions CS3 Three Phase Solid State Relay
Installation Instructions CS3 Three Phase Solid State elay 1 PK522-3 0037-75550 March 2018 Important Safeguards HIGH VOLTAGE is used in the operation of this equipment; DEATH ON CONTACT may result if personnel
Jun08 Rev C
Product Specification Connector, Card Edge,.050 Centerline 108-14034 02Jun08 Rev C 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for Tyco Electronics.050 centerline
U5300 Industrial Pressure Transducer
FEATURES Heavy Industrial CE Approval 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output ±0.1% Accuracy ±0.5% Total Error Band Compact Outline -40 C to +125 C
Chapter 7. Troubleshooting
Chapter 7 Troubleshooting Table of Contents Page 1 Troubleshooting... 7-2 2 Failure analysis charts... 7-2 3 Alarm factor tree analysis chart... 7-8 7-1 1 Troubleshooting An IPM has various integrated
1.7 A-ISOMETER IRDH575. RoHS. Dipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str Grünberg Tel.: Fax:
Dipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str. 65 505 Grünberg Tel.: 060 807-0 Fax: 060 807-59 A-ISOMETER IRDH575 Insulation monitoring device for unearthed AC, DC and AC/DC systems (IT systems) with
Installation Instructions for the MicroPressure Board Mount Pressure Sensors MPR Series Compact, High Accuracy, Compensated/Amplified
Installation Instructions for the MicroPressure Board Mount Pressure Sensors Compact, High Accuracy, Compensated/Amplified Issue C 32333868 General Information The is a very small piezoresistive silicon
Honeywell HumidIcon Digital Humidity/Temperature Sensors: HIH6120/6121 Series
Honeywell HumidIcon Digital Humidity/Temperature Sensors: HIH6120/6121 Series GENERAL INFORMATION The following associated literature is available on the Web: Product data sheet Product application note
Qualification Test Report. AMP-TWIST Series Jacks for Class EA systems
Qualification Test Report 501-93032 14/April/2011 Rev A AMP-TWIST Series Jacks for Class EA systems 1. INTRODUCTION 1.1 Purpose Qualification testing on AMP-TWIST* Series Jacks for Class E A Systems, to
Introducing Hermaphroditic Blade and Receptacle Connector
Introducing Hermaphroditic Blade and Receptacle Connector Wire-to-Board, Board-to-Board and Dust Cover Hermaphroditic Blade and Receptacle Connector : Wire-to-Board KEY FEATURES Available in 2, 4, and
U5700 Submersible Liquid Level Pressure Transducer
SPECIFICATIONS High Accuracy CE Compliant and Waterproof UL Certified Variety of Pressure Port Configurations Waterproof Optional Stainless Steel Snubber IP68 Rated Connection and Submersible Polyurethane
Honeywell HumidIcon Digital Humidity/Temperature Sensors: HIH6130/6131 Series with SPI Communication
Honeywell HumidIcon Digital Humidity/Temperature Sensors: HIH6130/6131 Series with SPI Communication GENERAL INFORMATION The following associated literature is available on the Web: Product data sheet
Austin Series Non-Isolated SMT DC - DC Power Modules: 3.3 Vdc and 5.0 Vdc Input, 1.5 Vdc Vdc Output, 6A
Data Sheet Document No: DS04-004 ver. 1.1 PDF Name: austin.pdf Titania Power Modules Austin Series Non-Isolated SMT DC - DC Power Modules: Features The Austin Power Module Series provides precise voltage
MEAS Subermsible Liquid Level Pressure Transducer SPECIFICATIONS. Features. Applications
MEAS 5700 Subermsible Liquid Level Pressure Transducer Features Heavy Industrial CE Approval 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output ±0.25% Accuracy
USB 3.0 Plug & Receptacle
US 3.0 Plug & Receptacle 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods and quality requirements of Tyco Electronics Universal Serial us (US) consortium
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION Features: High-Power LED Type Size (mm):φ6*5.1 Emitting Color:ULTRAVIOLET SMT package RoHS Compliant Decorative lighting Architectural lighting Chemical Testing Material Identification
Technical Data Sheet Opto Interrupter ITR
Technical Data Sheet Opto Interrupter ITR Features Fast response time High sensitivity Cut-Off visible wavelength Thin Compact Pb free Descriptions /F43 is a light reflection switch which includes a GaAs
CLARA AC Crystal CLARA AC 50. LED-modules for downlight. A qualified solution to replace and exceed Halogen solutions in Downlights.
CLARA AC CLARA AC Crystal CLARA AC 50 LED-modules for downlight A qualified solution to replace and exceed Halogen solutions in Downlights. No Driver is required! Page 2 of 24 Designed for downlight and
Applications. Application Summary 41
Applications Application Summary 41 This section provides a summary of applications where PolySwitch resettable devices, SiBar thyristor surge protectors, and protected power switches are used, followed
EN , EN , DALI 102/207, SELV Output, KS C 7655 Safety Certification Approved RoHS Compliant. Dim. Method
PIFE-W037D Flat 35W LED Driver 24V - 34V / 1.04A / 35W Features Dimmable Method: DALI Dimming Constant Current Control Active Power Factor Correction Protection : OVP, SCP and OTP Mechanical Outline (Metal
KILOVAC K1K High-Voltage Contactor
KILOVAC K1K High-Voltage Contactor High Performance in a Compact, Lightweight, Hermetically Sealed Contactor Designed for up to 1000 V/1000 A in Harsh Environments KILOVAC K1K High-Voltage Contactor Compact,
AD0412HB-C71GP (P) P.S. REV. DC FAN (RoHS)
AD0412HB-C71GP DC FAN (RoHS) P.S. REV. (P) A Y D A T A - S H E E T Engineering Printed On: 11/07/18 BRUSHLESS AXIAL COOLING FANS Customer Ref: (RoHS) Adda Model No AD0412HB-C71GP P.S: (P) Samples attached
ISOMETER IR1575. Insulation monitoring device for unearthed AC/3(N)AC systems up to 480 V and DC systems up to 480 V
Insulation monitoring device for unearthed AC/3(N)AC systems up to 480 V and DC systems up to 480 V IR1575_D00116_00_D_XXEN/05.2015 Insulation monitoring device for unearthed AC/3(N)AC systems up to 480
Basic Board Mount Pressure Sensors: NBP Series Uncompensated/Unamplified 60 mbar to 10 bar [1 psi to 150 psi]
![Basic Board Mount Pressure Sensors: NBP Series Uncompensated/Unamplified 60 mbar to 10 bar [1 psi to 150 psi]](/thumbs/92/108491932.jpg "Basic Board Mount Pressure Sensors: NBP Series Uncompensated/Unamplified 60 mbar to 10 bar [1 psi to 150 psi]")
Basic Board Mount Sensors: NBP Series Uncompensated/Unamplified 60 mbar to 10 bar [1 psi to 150 psi] DESCRIPTION Honeywell s Basic Board Mount Sensors: NBP Series Uncompensated/Unamplified are low pressure
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ARTESYN PRODUCT TESTING SERVICES 2900 South Diablo Way, Suite 190 Tempe, AZ 85282 Tom Tuttle Phone: 602 228 7869 Email: tom.tuttle@artesyn.com ELECTRICAL (EMC)
HM1500LF Relative Humidity Module
SPECIFICATIONS Small size product Product free from Lead, Cr(6+), Cd and Hg Humidity calibrated within +/-2% @55%RH Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5Vdc supply Ratiometric to voltage
M5800 Pressure Transducer with Rotatable Display
Pressure Transducer with Rotatable Display SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and customized Electrical Configurations Optional Stainless Steel Snubber CE Compliant
AXICOM Telecom-, Signal and RF Relays. Cradle Relay Accessories and Mounting Nov. 07 Rev. C ECOC: JM10
Cradle Relay Accessories and Mounting 108-98016 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet,
7PG17 - XR Intertripping, Interposing, Supervision and Special Purpose Relays. Answers for Infrastructure & Cities.
Reyrolle Protection Devices 7PG17 - XR Intertripping, Interposing, Supervision and Special Purpose Relays. Answers for Infrastructure & Cities. 7PG17 XR105, XR106 and XR107, XR205 and XR206 Interposing
PlanarMag Product Technology
Technical Data APPLICATIONS Enterprise switches and routers Low profile Laptop, Netbook, e-readers SMB (small medium business) switches and routers Wireless router TV/DVRs/STB IP Phones and cameras Video
Laboratory Honeywell Technology Solutions, Bangalore-EMC Lab, 19/2, Devarabisanahalli Village, K.R. Puram, Varthur Hobli, Bangalore, Karnataka
Last Amended on 07.10.2015 Page 1 of 18 I. EMC Test Facility 1. Electrical and Electronic Products, Process Control Devices, Lighting Control Products, Sensing and Control Devices, Electromechanical Products,
Honeywell HumidIcon Digital Humidity/Temperature Sensors. HIH9000 Series ±1.7 %RH Accuracy. Datasheet
Honeywell HumidIcon Digital Humidity/Temperature Sensors HIH9000 Series ±.7 %RH Accuracy Datasheet Honeywell HumidIcon Digital Humidity/Temperature Sensors Honeywell HumidIcon Digital Humidity/Temperature
SUBMERSIBLE Flush Diaphragm Liquid Level Sensor AST4520
Flush Diaphragm Liquid Level Sensor AST4520 Overview The AST4520 Flush Submersible liquid level sensor is the cost effective solution for level monitoring of turbulent tanks with viscous media. Approved
MS4525DO SPECIFICATIONS FEATURES APPLICATIONS
FEATURES PSI Pressure Ranges PCB Mountable Digital Output Barbed Pressure Ports APPLICATIONS Blocked Filter Detection Altitude and Airspeed Measurements Medical Instruments Fire Suppression System Panel
DSF xx15.xx xhv Ex-Atex Ex-Atex Certified Two wire Hall Effect Speed Sensor
DSF xx15.xx xhv Ex-Atex Product ID Type # Product # Drawing # DSF 1215.01 SHV Ex-atex (5m) 304Z-05197 113216 DSF 1415.01 AHV Ex-atex S148 304Z-05256 113351 DSF 1615.01 SHV Ex-atex (5m) 304Z-05196 113214
Preliminary specification
Deep UV LED - 340nm UV CA3535 series (CUD4GF1A) CUD4GF1A RoHS Product Brief Description CUD4GF1A is a deep ultraviolet light emitting diode with peak emission wavelengths from 340nm to 345nm. It incorporates
Issue C. Installation Instructions for the Basic Amplified Board Mount Pressure Sensors, ABP Series
Installation Instructions for the Basic Amplified Board Mount Pressure GENERAL SPECIFICATIONS The ABP Series are piezoresistive silicon pressure sensors offering a ratiometric analog or digital output
SERIES VAC Microprocessor-Based Direct Spark Ignition Control FEATURES APPLICATIONS SPECIFICATIONS DESCRIPTION. Export Information (USA)
R SERIES 35-70 120 VAC Microprocessor-Based Direct Spark Ignition Control F-35-70 November 2015 FEATURES Safe start with DETECT-A-FLAME flame sensing technology Custom pre-purge and inter-purge timings