1N4001 THRU 1N4007 1N4001 THRU 1N SILICON RECTIFIER. Features:
|
|
|
- Rolf Briggs
- 6 years ago
- Views:
Transcription
1 Features: 4001 THRU SILICON RECTIFIER Diffused Junction Low Forward Voltage Drop High Current Capability High Reliability High Surge Current Capability This is a Pb Free Device All SMC parts are traceable to the wafer lot Additional testing can be offered upon request 4001 THRU 4007 Mechanical data: Case: Molded Plastic Terminals: Plated Leads Solderable Per MIL-STD-202, Method 208 Polarity: Cathode Band Weight: 0.35 grams(approx) Mounting Position: Any Mechanical Dimensions: In mm/inches DO-41 China - Germany - Korea - Singapore - United States - sales@ smc-diodes.com
2 4001 THRU 4007 Marking Diagram: Where XXXXX is YYWWL 4001 SSG YY WW L = Part Name = SSG = Year = Week = Lot Number Cautions:Molding resin Epoxy resin UL: 94V-0 Ordering Information Device Package Shipping DO-41 (Pb-Free) 5000pcs / tape For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification. China - Germany - Korea - Singapore - United States - sales@ smc-diodes.com
3 4001 THRU 4007 Maximum Ratings and Electrical C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Type Number Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average forward rectified output = 75 C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Symbol VRRM VRWM VR VRMS IO 1.0 A IFSM 30 A Forward =1.0A VFM 1.0 V Peak Reverse = 25 C At Rated DC Blocking = 100 C IRM Typical Junction Capacitance (Note 2) CJ 15 pf Unit V V µa Typical Thermal Resistance Junction to Ambient (Note 1) RθJA 50 C/W Operating Junction Temperature Range TJ -65 to +125 C Storage Temperature Range T STG -65 to +150 C Note: 1. Leads maintained at ambient temperature at a distance of 9.5mm form the case. 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C. China - Germany - Korea - Singapore - United States - sales@ smc-diodes.com
4 4001 THRU 4007 China - Germany - Korea - Singapore - United States - sales@ smc-diodes.com
5 4001 THRU 4007 DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users fail-safe precautions or other arrangement. 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.. China - Germany - Korea - Singapore - United States - sales@ smc-diodes.com
ULTRA FAST RECITIFIERS
Applications: 4001 4007 ULTRA FAST RECITIFIERS 4001 4007 Switching Power Supply Power Switching Circuits General Purpose Features: The plastic package carries Underwriters Laboratory Flammability Classification
PD100MF0MPx. Surface Mount Type, Opaque Resin Photodiode. PD100MF0MPx. Agency Approvals/Compliance. Features. Model Line-up.
PD100MF0MPx Surface Mount Type, Opaque Resin Photodiode Features 1. Compact and thin SMD package 2. Top view and side view mountable 3. Plastic mold with visible light cut-off black resin lens 4. Peak
Specification Status: Released
PAGE NO.: 1 OF 8 Specification Status: Released Not to be used for new designs. For new design please contact Tyco Electronics Sales BENEFITS Board space savings Help protect sensitive electronic circuits
2. Contact form 6: 1c (SPDT) Load voltage (peak value) quantity Fully Sealed 1c (SPDT) 5 VDC 5 VDC 60 V 400 ma 130 ma G3VM-66M 50 pcs/tube
MOS FET Relay in module package with SPDT (1C) This model of operated by voltage (Rated input voltage is 5 VDC.) Contribute to reduce the mounting space on the print circuit board by small package Contact
Multi Layer Varistor Overvoltage Protection Device
GENERAL DESCRIPTION PAGE NO.: 1 OF 5 These s are small, leadless, surface mount packages made of multiple layers of Zinc Oxide, with electrodes between them. They are used to help protect integrated circuits
Raychem Overvoltage Devices. ESD Protector PESD BENEFITS FEATURES APPLICATIONS MATERIALS INFORMATION PART NUMBERING.
BENEFITS Suitable for high speed data transmission applications Longer battery life due to low leakage current Board space savings Help protect sensitive electronic circuits against electrostatic discharge
Specification Status: Released
PAGE NO.: Page 1 of 5 Specification Status: Released BENEFITS Silicon ESD device in an EIA-0402 size rectangular passive component SMT package Standard PCB assembly and rework processes Bi-directional
SiBar Thyristor Surge Protectors. TVBxxxRSC-L Series. Benefits: Features: Applications:
Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction.
Raychem Overvoltage Devices. ROV05, ROV05H 5mm Series Metal Oxide Varistors
Document: SCD Rev. A June 30, 003 GENERAL DESCRIPTION The ROV0-XXX (Radial-leaded Metal Oxide Varistor) products are mm radial leaded varistor devices suitable for protection of overvoltage transients.
SiBar Thyristor Surge Protectors. TVBxxxNSA-L Series. Benefits: Features: Applications:
Raychem Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction.
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. GENERAL DESCRIPTION The ROV14-XXX (Radial-leaded Metal Oxide Varistor) products
SMD 2121 Black Frame MC-S2121BHA
SMD 2121 Black Frame MC-S2121BHA 1. SPECIFICATIONS 1.1 Absolute Maximum Ratings (Ta=25 C) Item Symbol Absolute Maximum Rating Red Green Blue Unit Forward Current I F 30 30 30 ma Pulse Forward Current I
LASER DIODE NX8316XC nm FOR LONG HAUL 2.5 Gb/s InGaAsP MQW-DFB LASER DIODE TOSA DESCRIPTION APPLICATION FEATURES
LASER DIODE NX8316XC 1 310 nm FOR LONG HAUL 2.5 Gb/s InGaAsP MQW-DFB LASER DIODE TOSA DESCRIPTION The NX8316XC is a 1 310 nm Multiple Quantum Well (MQW) structured Distributed Feed-Back (DFB) laser diode
SPECIFICATIONS FOR REFOND SURFACE MOUNT LED
SPECIFICATIONS FOR REFOND SURFACE MOUNT LED Model: RF-WNB190DS-DC Company Name: Confirmed By Customer: DATE: Feature Viewing angle:140 deg The materials of the chip is InGaN 1.60mm 0.80mm 0.70mm SMT-LED
SiBar Thyristor Surge Protectors. TVBxxxSA-L Series. Benefits: Features: Applications:
Raychem Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction.
Raychem Overvoltage Devices. ROV14, ROV14H, ROV14E 14mm Series Metal Oxide Varistors
GENERAL DESCRIPTION The ROV14-XXX (Radial-leaded Metal Oxide Varistor) products are 14mm radial leaded varistor devices suitable for protection of overvoltage transients. ROV devices can provide protection
SMT450. High Performance TOP LED
High Performance TOP LED Outer Dimension (Unit:mm) - Chip Material: InGaN - Number of Chips: 1pcs - Chip Dimension: 350um x 350um - Peak Wavelength: 450nm typ. - Lead Frame Die: Siliver
Specification Status: Released
PAGE NO.: 1 OF 5 GENERAL DESCRIPTION BENEFITS Specification Status: Released Helps provide overvoltage fault protection against high energy surges Suitable for sensitive equipment due to excellent impulse
Surface Mount 905 nm Pulsed Semiconductor Lasers High Power Laser-Diode Family for Commercial Range Finding
DATASHEET Photon Detection Surface Mount 905 nm Pulsed Semiconductor Lasers Near field profile Key Features Multi cavity lasers concentrate emitting source size Quantum well structure High peak pulsed
Specification Status: Released
PGE NO.: 1 OF 5 PIN CONFIGURTION ND DESCRIPTION: Specification Status: Released Pin Configuration (Bottom View of ) (Top View of ) 2 хххх C (Side View of ) Note: 2 is product code хххх is Batch Code P1
Features. Applications
General Description The is a high performance AC/DC power supply controller for battery charger and adapter applications. The device uses Pulse Frequency Modulation (PFM) method to build discontinuous
Evaluation Board Information
Ground Isolation Amplifier BA3121F/BA3123F Evaluation Board Manual BA3121/23F-EVK-001 General BA3121F is a ground isolation amplifier developed for car audio applications. This IC efficiently eliminates
Specification Status: Released
PAGE NO.: 1 OF 6 GENERAL DESCRIPTION BENEFITS Specification Status: Released Helps provide overvoltage fault protection against high energy surges Suitable for sensitive equipment due to excellent impulse
Specification MBT801-S
Specification MBT801-S Drawn SSC Approval 고객명 Approval www. MBT801-S 1. Features 2. Absolute Maximum Ratings 3. Electro Characteristics 4. Optical characteristics 5. Outline Dimension 6. Packing 7. Soldering
LASER DIODE NX7637BF-AA
1 625 nm InGaAsP MQW-FP LASER DIODE COAXIAL MODULE FOR OTDR APPLICATION LASER DIODE NX7637BF-AA DESCRIPTION The NX7637BF-AA is a 1 625 nm Multiple Quantum Well (MQW) structured Fabry-Perot (FP) laser diode
E PIR Motion Detector. Features. General Description. Applications. Single Sensor Application Circuit
E9.92 PIR Motion Detector Features Fully integrated PIR motion detector Digital signal processing On chip supply regulator with wide operating voltage range Low power consumption Temperature compensation
Technical Data Sheet. Pb Free. Specification NB104 SSC. Customer. Rev. 03 July 서식번호 : SSC- QP (Rev.0.
Specification NB104 Pb Free Drawn SSC Approval Customer Approval [ Contents ] 1. Description 2. Absolute maximum ratings 3. Electro-Optical characteristics 4. Characteristic diagrams 5. Reliability result
RoHS. Specification SAWW9H0A. 서식번호 : SSC-QP (Rev.00)
Specification RoHS SAWW9H0A 1 Description SAWW9H0A SAWW9H0A Features Super high flux output and high luminance Designed for high current operation SMT solderable Lead free product RoHS compliant The Acrich
Reverse Package Infrared LED IR25-21C/TR8
Features Small double-end package Low forward voltage Good spectral matching to Si photo detector Package in 8mm tape on 7 diameter reel Pb free The product itself will remain within RoHS compliant version.
Gas Discharge Tubes. Features: Benefits: Applications:
TE Circuit Protection 5mm 3Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission lines from
6600 SERIES 8-Pin DIP, Subminiature Bimetal Disc Thermostat
6600 SERIES 8-Pin DIP, Subminiature Bimetal Disc Thermostat Introduction The Airpax 6600 series is a RoHS compliant, positive snap action, single pole / single throw, sub-miniature bimetallic thermostat
SPECIFICATIONS. US0603YG LED Chip 0603 Yellow Green SWISSDIS. Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern
SWISSDIS Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern Tel.: +41 62 919 44 00 Fax: +41 62 919 44 01 info@swissdis.ch www.swissdis.ch SPECIFICATIONS US0603YG LED Chip 0603 Yellow Green Version December 2015
Applications PL- N Series Lens Type Sensor Type Serial Number
Proximity Sensors PL Pyroelectric Infrared Sensors Overview KEMET s Pyroelectric Infrared Sensors use the pyroelectric effect of ceramic by absorbing infrared rays emitted from the human body. This detects
RP SERIES THERMAL PROTECTORS
RP SERIES THERMAL PROTECTORS Introduction The RP Series thermal protector is suited for recessed lighting applications. The RP s compact package is designed to mount on the fixture; and, with sensitivity
NX8601BF-AA. Data Sheet R08DS0109EJ0100 Rev.1.00 Apr 19, 2013 LASER DIODE DESCRIPTION FEATURES
A Business Partner of Renesas Electronics Corporation. NX8601BF-AA LASER DIODE 1 625 nm InGaAsP MQW-DFB LASER DIODE COAXIAL MODULE FOR OTDR APPLICATION Data Sheet R08DS0109EJ0100 Rev.1.00 DESCRIPTION The
APPLICATION NOTES for LED DISPLAYs
THROUGH HOLE DISPLAY MOUNTING METHOD LEAD FORMING Do not bend the component leads by hand without proper tools. The leads should be bent by clinching the upper part of the lead firmly such that the bending
GP2Y1010AU0F. Compact Optical Dust Sensor. Description. Compliance. Applications. Features GP2Y1010AU0F. 1. Compliant with RoHS directive (2002/95/EC)
GPY00AU0F Compact Optical Dust Sensor Description GPY00AU0F is a dust sensor by optical sensing system. An infrared emitting diode (IRED) and an phototransistor are diagonally arranged into this device.
M7100 Pressure Transducer
SPECIFICATIONS Performance standard on and off highway engine and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless steel wetted surfaces
A214B/SUG/S400-X6 LAMP. Features. Description. Applications. Revision 1. Expired Period: Forever. LifecyclePhase: Low power consumption
Features Low power consumption High efficiency and low cost Good control and free combinations on the colors of LED lamps Good lock and easy to assembly. Stackable and easy to assembly Stackable vertically
RFFM6403. Manufacturing Notes. Table of Contents
RFFM6403 Manufacturing Notes Table of Contents The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for
Is Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
Technical Data Sheet 1.6mm Side Looking Phototransistor
Technical Data Sheet 1.6mm Side Looking Phototransistor Features Fast response time High sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Descriptions
Gas Discharge Tubes GTCX28-XXXM-R05 Series
GTCX28-XXXM-R05 Series Raychem Circuit Protection Products 8mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal
Following this guideline enables proper treatment of the relays during the critical phase in the relay life.
Electromechanical relays are one of the most robust and most reliable electronic components. In order to achieve and guarantee the excellent performance of AXICOM relays, some precautions must be taken
Technical Data Sheet 1.5mm Side Face Infrared LED
Technical Data Sheet 1.5mm Side Face Infrared LED Features High reliability High radiant intensity Peak wavelength λp=940nm 2.54mm Lead spacing Low forward voltage Pb free This product itself will remain
Technical Data Sheet 5mm Infrared LED, T-1
Technical Data Sheet 5mm Infrared LED, T-1 Features High reliability 2.54mm lead spacing Low forward voltage Good spectral matching to Si photodetector Pb free The product itself will remain within RoHS
Specification Status: Released
PAGE NO.: 1 OF 5 Specification Status: Released PIN CONFIGURATION AND DESCRIPTION: D2 хххх Note: D2 is product code xxxx is Batch code P1 Pth P Arm TABLE 1. DIMENSIONS: A B C D E MIN MAX MIN MAX MIN MAX
Installation Instructions CS3 Three Phase Solid State Relay
Installation Instructions CS3 Three Phase Solid State elay 1 PK522-3 0037-75550 March 2018 Important Safeguards HIGH VOLTAGE is used in the operation of this equipment; DEATH ON CONTACT may result if personnel
Manufacturing Notes for RFPA2016
Manufacturing Notes for RFPA2016 The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ( RFMD ) for its use, nor for
Technical Data Sheet 3mm Phototransistor T-1
Technical Data Sheet 3mm Phototransistor T-1 Features Fast response time High photo sensitivity Pb free The product itself will remain within RoHS compliant version. PT24-6C Descriptions PT24-6C is a high
E Wired Intruder Detector
E93.97 Wired Intruder Detector JAN 3, 05 Description The E93.97 is very suitable for applications in wired intruder detectors. It works with all popular conventional analog PIR detectors. No false alarms
Manufacturing Notes for RFPA2189
Manufacturing Notes for RFPA2189 The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for
Omnipolar Digital Hall-effect Sensor ICs: SS351AT, SS451A, SS551AT
Omnipolar Digital Hall-effect s: 005917 Issue 3 Datasheet FEATUES Simple activation from a North pole or a South pole and sensitive magnetics Low voltage 3 Vdc capability Built-in reverse polarity protection
FEBL8511_REFBOARD_Manual-01 ML FC. REFERENCE BOARD Manual for UV Sensor (QFN)
ML8511-00FC REFERENCE BOARD Manual for UV Sensor (QFN) Issue date: August 27, 2013 NOTES No copying or reproduction of this document, in part or in whole, is permitted without the consent of LAPIS Semiconductor
RFSW6132. Manufacturing Notes. Table of Contents. 1 Introduction... 2
RFSW6132 Manufacturing Notes Table of Contents 1 Introduction... 2 2 Quad Flat Pack Package Description... 2 2.1 RFSW6132 Outline Drawing... 2 2.2 RFSW6132 Branding Diagram... 3 3 Carriers... 3 3.1 Tape
Gas Discharge Tubes GTCX25-XXXM-R02 Series
Raychem Circuit Protection 5mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission lines
NX7363JB-BC. Data Sheet R08DS0009EJ0200 Rev.2.00 LASER DIODE. Sep 19, 2010 DESCRIPTION FEATURES
A Business Partner of Renesas Electronics Corporation. NX7363JB-BC LASER DIODE InGaAsP MQW DC-PBH PULSED LASER DIODE MODULE 1 310 nm OTDR APPLICATION Data Sheet DESCRIPTION The NX7363JB-BC is a 1 310 nm
NX7535 Series DESCRIPTION NX7535AN-AA FEATURES NX7535BN-AA
LASER DIODE 1 550 nm InGaAsP MQW-FP LASER DIODE COAXIAL MODULE WITH MONITOR PD FOR OTDR APPLICATION Data Sheet DESCRIPTION The NX7535 Series is a 1 550 nm Multiple Quantum Well (MQW) structured Fabry-Perot
SENSOR SWITCH. OncQue Corporation 大日科技股份有限公司. Item No. RBS07 Series Description TILT SWITCH Version 13 Page 1 of 16 Date Nov. 04, 2013 FUNCTIONS
Page 1 of 16 Date Nov. 04, 2013 FUNCTIONS 1. 45 Tilt Detecting within a 360 radius 2. 45 Tilt Detecting within a 360 radius with 45 bended leads. 3. Up-Side Down Detecting APPLICATIONS 1. Automatically
DSS SERIES. Single Channel Hall Effect Speed Sensor. Product ID
Product ID Type # Product # Drawing # 378Z-05380 DSS 1210.00 STV (5m) 113807 374Z-04996 DSS 1210.02 PHV 112705 374Z-05052 DSS 1210.02 SHV (2m) 112865 378Z-05864 DSS 1210.12 AHV 115675 378Z-05910 DSS 1210.13
Technical Data Sheet 5mm Phototransistor T-1
Technical Data Sheet 5mm Phototransistor T-1 Features Fast response time High photo sensitivity Pb free This product itself will remain within RoHS compliant version. Descriptions is a high speed and high
Standard SPECIFICATIONS FEATURES APPLICATIONS
SPECIFICATIONS PC Board Mountable Pressure Sensor 0-50 mv Output Voltage Excitation Gage, Absolute, and Differential Temperature Compensated FEATURES Dual-in-Line Package 0ºC to 50ºC Compensated Temperature
Preliminary specification
Deep UV LED - 340nm UV CA3535 series (CUD4GF1A) CUD4GF1A RoHS Product Brief Description CUD4GF1A is a deep ultraviolet light emitting diode with peak emission wavelengths from 340nm to 345nm. It incorporates
1Hz,16Hz, S2 S3 S4 S5 S6 S7 S8 ALARM REGISTER COMPARATOR WEEK SECONDS MINUTES HOURS DAYS MONTHS YEARS /12 1 /24 1 /7 /28-1 /31
REAL-TIME CLOCK WITH INTERNAL RAM RP/RF5C0A NO. EK-086-9804 OUTLINE The RP/RF5C0A are real-time clocks for microcomputers that can be connected directly to buses of microcomputers with such CPUs as the
Austin Series Non-Isolated SMT DC - DC Power Modules: 3.3 Vdc and 5.0 Vdc Input, 1.5 Vdc Vdc Output, 6A
Data Sheet Document No: DS04-004 ver. 1.1 PDF Name: austin.pdf Titania Power Modules Austin Series Non-Isolated SMT DC - DC Power Modules: Features The Austin Power Module Series provides precise voltage
D5100 Industrial Differential Pressure Transducer
FEATURES Heavy Industrial CE Approval (amplified only) As Low As ±0.1% Pressure Non Linearity Rugged Construction: Can Withstand 50g Shock/20g Vibration Up to -40 C to +125 C Operating Temperature Range
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION Features: High-Power LED Type Size (mm):φ6*5.1 Emitting Color:ULTRAVIOLET SMT package RoHS Compliant Decorative lighting Architectural lighting Chemical Testing Material Identification
DSF xx15.xx xhv Ex-Atex Ex-Atex Certified Two wire Hall Effect Speed Sensor
DSF xx15.xx xhv Ex-Atex Product ID Type # Product # Drawing # DSF 1215.01 SHV Ex-atex (5m) 304Z-05197 113216 DSF 1415.01 AHV Ex-atex S148 304Z-05256 113351 DSF 1615.01 SHV Ex-atex (5m) 304Z-05196 113214
A5364. Ionization Smoke Detector with Interconnect
Features and Benefits Low average standby current for long battery life Interconnect up to 125 detectors Piezoelectric horn driver Guard outputs for detector input Pulse testing for low battery Power-on
Mounting Instruction
Mounting Instruction Solder-pin type Small-PIM Revised Records Date Version Contents Apr.-25th-2013 1.0 - Oct.-25th-2013 1.1 Attention about removing the module from a heat sink Jan.-27th-2016 1.2 Attention
SN5446A, 47A, 48, SN54LS47, LS48, LS49 SN7446A, 47A, 48, SN74LS47, LS48, LS49 BCD-TO-SEVEN-SEGMENT DECODERS/DRIVERS
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION High-Power LED Type Size (mm):φ6*5.1 Emitting Color:Warm White SMT package RoHS Compliant Features: Decorative lighting Architectural lighting Interior automotive Illuminations Applications:
PlanarMag Product Technology
Technical Data APPLICATIONS Enterprise switches and routers Low profile Laptop, Netbook, e-readers SMB (small medium business) switches and routers Wireless router TV/DVRs/STB IP Phones and cameras Video
D6T. Contactless measurement creating energy-efficient and comfortable living spaces. MEMS Thermal Sensors
MEMS Thermal Sensors D6T Contactless measurement creating energy-efficient and comfortable living spaces Application examples provided in this document are for reference only. In actual applications, confirm
Installation Instructions for the MicroPressure Board Mount Pressure Sensors MPR Series Compact, High Accuracy, Compensated/Amplified
Installation Instructions for the MicroPressure Board Mount Pressure Sensors Compact, High Accuracy, Compensated/Amplified Issue C 32333868 General Information The is a very small piezoresistive silicon
OPERATION MANUAL MODEL 3255A ACCELEROMETER
OPERATION MANUAL MODEL 3255A ACCELEROMETER TE CONNECTIVITY SENSORS /// MODEL 3255A ACCELEROMETER 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one
U5700 Submersible Liquid Level Pressure Transducer
SPECIFICATIONS High Accuracy CE Compliant and Waterproof UL Certified Variety of Pressure Port Configurations Waterproof Optional Stainless Steel Snubber IP68 Rated Connection and Submersible Polyurethane
Apex MediTech ALC109 ALARM SYSTEM
ALC109 ALARM SYSTEM PRIORITY ENCODED ALARM SYSTEM FOR MEDICAL DEVICES Rev. 04 28 November 2013 Product data sheet 1. General description The ALC109 is a hybrid priority encoded audio alarm, available in
Manufacturing Notes for RFDA0025
Manufacturing Notes for RFDA0025 The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for
EMI Filter (Data Line) TRIGON COMPONENTS. Dimensions Table (mm)
FEATURES No polarity due to symmetrical currentvoltage characteristics Excellent electro static absorption capability Fast Respond Low Leakage Current Bi-directional RoHS Compliant APPLICATIONS USB3.0
FEATURES ORDERING CODE EMCP C 100 N T (1) (2) (3) (4) (5) (6) (7) SMT Multilayer EMI Filter (Power Line) TRIGON COMPONENTS
FEATURES No polarity due to symmetrical currentvoltage characteristics Excellent electro static absorption capability Fast Respond Low Leakage Current Bi-directional RoHS Compliant APPLICATIONS USB3.0
OPERATION MANUAL Model 8011 & mA
OPERATION MANUAL Model 8011 & 8021 4-20mA TE CONNECTIVITY SENSORS/// MODEL 8011 & 8021 4-20MA 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year
Used as indicators of indicating the Degree, Functions, Positions etc, in electronic instruments
Features Low power consumption High efficiency and low cost Good control and free combinations on the colors of LED lamps Good lock and easy to assembly. Stackable and easy to assembly Stackable vertically
DP86 Constant Voltage with Fitting
SPECIFICATIONS 316L SS Wet/Wet Differential Low Pressure 0 100mV Output The DP86 constant voltage with fitting differential pressure sensor is a double-sided, media compatible, piezoresistive silicon pressure
MSP100 Pressure Transducer
SPECIFICATIONS Analog and 14-Bit Digital Output Small Size Low Cost 316L Stainless Steel or 17-4PH FEATURES Single Piece Construction; No Welds, No Oil 100% Stainless Steel Isolation for Harsh Chemical
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Full Color Top View LEDs Features P-LCC-4 package. White package. Optical indicator. Colorless clear window. Pb-free The product itself will remain within RoHS compliant version. Descriptions
ORIGA-SENSOFLEX Displacement Measuring System for Cylinder Series OSP-P
ORIGA-SENSOFLEX Displacement Measuring System for Cylinder Series OSP-P Contents Description Data Sheet No. Page Overview P-1.50.001E 117-118 Technical Data SFI-plus P-1.50.002E-1, 2 119-120 Dimensions
SENSOR SWITCH BRAVOTRONICS CORPORATION 松瓚科技股份有限公司. Item No. VBS080100T Description VIBRATION SWITCH Version 8 Page 1 of 10 Date Nov.
Page 1 of 10 Date Nov. 20, 2013 FUNCTIONS Vibration detecting for vertical PCB APPLICATION 1. Wake up systems for power saving, such like remote controllers 2. GPS starting system 3. Alarm system 4. Anti-theft
MEAS EMITTER ASSEMBLY ELM-4000 SERIES
MEAS EMITTER ASSEMBLY ELM-4000 SERIES SpO2 optical sensor component Dual Drive Lead Frame Construction Pulse Oximetry Component Clear Epoxy Low oxygen level can put a strain on cell functioning including
EtherCAT Box Modules (EPxxxx-xxxx)
Notes about operation of EtherCAT Box Modules (EPxxxx-xxxx) in potentially explosive areas (ATEX) Version: 1.1.0 Date: 2011-06-10 Table of Contents Table of Contents 1 Foreword 1 1.1 Notes on the documentation
MODEL 8143 SIGNAL SELECTOR INSTALLATION AND OPERATION MANUAL
MODEL 8143 SIGNAL SELECTOR INSTALLATION AND OPERATION MANUAL 95 Methodist Hill Drive Rochester, NY 14623 Phone: US +1.585.321.5800 Fax: US +1.585.321.5219 www.spectracomcorp.com Part Number 8143-5000-0050
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION 1W WHITE LED MODULE Features: High-Power LED Type Size (mm):φ6*7.1 Emitting Color: Warm White SMT package RoHS Compliant Decorative lighting Architectural lighting Interior automotive
- For Continuous Radon Monitoring (CRM) Systems - Ultra Low Power Requirement
RN53 Radon Detector RN53 - For Continuous Radon Monitoring (CRM) Systems - Ultra Low Power Requirement Description The RN53 Radon Detector operates on the method of electrostatic collecting of the radon
ER-TF SERIES. Wide-area Ionizer Steady-state DC Method. Slim in shape, Wide in charge removal area, An evolutionary form in expression.
117 Wide-area Ionizer Steady-state DC Method SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.191 No compressed air necessary guide... P.11~ General precautions...
Installation and Operating instructions for. C9900-U battery pack. Version: 2.0 Date:
Installation and Operating instructions for C9900-U330-0010 battery pack Version: 2.0 Date: 2017-03-23 Table of contents Table of contents 1 Foreword 3 1.1 Notes on the Documentation 3 1.1.1 Liability
HM1520LF Relative Humidity Module
SPECIFICATIONS Tubular form for through wall mounting Product free from Lead, Cr(6+), Cd and Hg Calibrated, linear voltage for easy electronic interface Typical 1 to 1.6 Volt DC output for 0 to 20% RH
U5300 Industrial Pressure Transducer
FEATURES Heavy Industrial CE Approval 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output ±0.1% Accuracy ±0.5% Total Error Band Compact Outline -40 C to +125 C
D5100 Industrial Differential Pressure Transducer
SPECIFICATIONS 316L Stainless Steel Wetted Surface Voltage, Current, and mv Outputs True Wet/Wet Differential CE Certified (amplified version only) Variety of Pressure Ports and Electrical Connections
E2K-L. Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid. Liquid Level Sensor. Ordering Information
Liquid Level Sensor EK-L CSM_EK-L_DS_E_4_ Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid Mount to bypass pipes. Fit a wide range of pipe diameters: 8 to 11 mm or 1 to mm Built-in
Application Notes For LED Displays
Through Hole Display Mounting Method Lead Forming Do not bend the component leads by hand without proper tools. The leads should be bent by clinching the upper part of the lead firmly such that the bending