Raychem Overvoltage Devices. ROV05, ROV05H 5mm Series Metal Oxide Varistors
|
|
- Dominic Reeves
- 5 years ago
- Views:
Transcription
1 Document: SCD Rev. A June 30, 003 GENERAL DESCRIPTION The ROV0-XXX (Radial-leaded Metal Oxide Varistor) products are mm radial leaded varistor devices suitable for protection of overvoltage transients. ROV devices can provide protection for a wide variety of power systems against overvoltage faults such as lightning, power contact and power induction. Suitable for a broad range of applications including, but not limited to security, power supplies, surge strips, etc., the ROV device helps to protect valuable equipment from potential power surge damage by clamping high energy, short duration impulses. The ROV devices have high current handling and energy absorption capability and fast response times to help protect against transient faults. FEATURES Radial leaded Broad Varistor voltage and V rms range Varistor voltage : 8V - 70V V rms voltage : V - 0V Two surge capability series Standard series, High surge series Various lead types Straight, Kinked, Other Various packaging options Bulk, Tape & Reel, Ammo Pack Helps designers meet the following standards UL, CSA, VDE Fast response time High current and energy absorption capability APPLICATIONS Power supplies and power systems Line voltage Telecommunications systems Automotive systems Appliances TYPICAL APPLICATION SCHEMATIC * Protected device *In some applications, a polymeric PTC device such as a Tyco Electronics PolySwitch device may be used instead of a fuse to provide a preferred solution. Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 90 Tel: (0) 7-8 Fax: (0) 7-8 of
2 Document: SCD Rev. A June 30, 003 PART NUMBERING ROV 0 K -S - ROV series Disk Diameter mm Packaging : Bulk - : Tape & Reel -AP : Ammo Pack Surge series Lead Type - : Standard Series : Kinked Lead H : High Surge Series -S : Straight Lead Varistor Voltage Tolerance = x ^ = 0V K : ±% L : ±% M : ±0% DEVICE MARKING 7 K Logo Voltage Designator Tolerance (± %) - Lot Identification - Agency Marking 7K VDE GENERAL CHARACTERISTICS Storage temperature: operating temperature: working surface temperature: Temperature coefficient of voltage: Insulation resistance of coating (@ 00 VDC): response time: Lead Material: -0 C + C -0 C + C + C % / C max. Over 00MΩ ns AWG Sn/Pb Plated Copper AGENCY RECOGNITION Device Ratings and Characteristics Tables contain specific recognition information for each individual part. The table below details marking symbols for each agency recognition type. UL UL9 CSA VDE (nd Edition) Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 90 Tel: (0) 7-8 Fax: (0) 7-8 of
3 Document: SCD Rev. A June 30, 003 DEVICE RATINGS AND CHARACTERISTICS STANDARD SERIES Part Number Varistor Voltage V@0.mA (V DC ) Tolerance Allowable Voltage Clamping Voltage V@A V rms (V AC ) (V DC ) (V DC ) Surge Current (8x0us) Time (A) Rated Wattage Energy (x00us) Times (A) (W) (J) Capacitance (pf) Certifications ROV0-M 8 ± 0% 0 ) 0. ROV0-0L ± % 8 8 ) ROV0-70K ) ROV0-330K ) ROV0-390K ). 877 ROV0-70K ). 7 ROV0-0K 3 3 ).8 3 ROV0-K ). 0 ROV0-K ROV0-K ROV0-K ROV0-K ROV0-8K ROV0-0K ROV0-K ± % ROV0-K ROV0-7K ROV0-30K ROV0-33K ROV0-3K ROV0-39K ROV0-3K ROV0-7K ROV0-K ROV0-K ROV0-K ROV0-8K ROV0-7K ) The clamping voltage for devices ROV0-M to ROV0-K is tested with A current Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 90 Tel: (0) 7-8 Fax: (0) of
4 PULSE LIFETIME RATING CURVES STANDARD SERIES Document: SCD Rev. A June 30, 003 V-I CHARACTERISTIC CURVES STANDARD SERIES Imax. (A) ROV0-M ROV0-K Pulse 3 Voltage (V) max leakage current ROV0-K ROV0-0K ROV0-70K ROV0-390K ROV0-330K ROV0-70K ROV0-0L ROV0-M ROV0-M ROV0-K max clamping voltage ROV0-K ROV0-0K ROV0-70K ROV0-390K ROV0-330K ROV0-70K ROV0-0L ROV0-M Rectangular Wave (µs) 7 TEST CURRENT WAVEFORM - -3 ~ A : DIRECT CURRENT - ~ A : 8 x 0gs Current (A) ROV0-K ROV0-7K max leakage current ROV0-K ROV0-7K max clamping voltage Imax. (A) Pulse Voltage (V) ROV0-3K ROV0-39K ROV0-3K ROV0-7K ROV0-7K ROV0-K TEST CURRENT WAVEFORM ROV0-0K ~ A : DIRECT CURRENT - 3 ROV0-K ~ A : 8 x 0gs ROV0-K ROV0-K ROV0-K ROV0-K ROV0-7K ROV0-3K ROV0-39K ROV0-3K ROV0-7K ROV0-K ROV0-L ROV0-0K ROV0-K ROV0-K ROV0-K ROV0-K Rectangular Wave (µs) Current (A) Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 90 Tel: (0) 7-8 Fax: (0) 7-8 of
5 Document: SCD Rev. A June 30, 003 DEVICE RATINGS AND CHARACTERISTICS HIGH SURGE SERIES Part Number Varistor Voltage V@0.mA (V DC ) Tolerance Allowable Voltage Clamping Voltage V@A V rms (V AC ) (V DC ) (V DC ) Surge Current (8x0us) Time (A) Rated Wattage Energy (x00us) Times (A) (W) (J) Capacitance (pf) ROV0HM 8 ± 0% 0 ) ROV0H0L ± % 8 8 ) ROV0H70K ). 70 ROV0H330K ) ROV0H390K ). 8 ROV0H70K ).8 70 ROV0H0K 3 3 ). 0 ROV0HK ). 00 ROV0HK ROV0HK ROV0HK ROV0HK ROV0H8K Certifications ROV0H0K ROV0HK ± % ROV0HK ROV0H7K ROV0H30K ROV0H33K ROV0H3K ROV0H39K ROV0H3K ROV0H7K ROV0HK ROV0HK ROV0HK ROV0H8K ROV0H7K ). The clamping voltage for devices ROV0HM to ROV0HK is tested with A current Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 90 Tel: (0) 7-8 Fax: (0) 7-8 of
6 PULSE LIFETIME RATING CURVES HIGH SURGE SERIES Document: SCD Rev. A June 30, 003 V-I CHARACTERISTIC CURVES HIGH SURGE SERIES Imax. (A) ROV0HM ROV0HK Pulse 3 Voltage (V) max leakage current ROV0HK ROV0H0K ROV0H70K ROV0H390K ROV0H330K ROV0H70K ROV0H0L ROV0HM ROV0HM ROV0HK max clamping voltage ROV0HK ROV0H0K ROV0H70K ROV0H390K ROV0H330K ROV0H70K ROV0H0L ROV0HM Rectangular Wave (µs) TEST CURRENT WAVEFORM ~ A : DIRECT CURRENT - ~ A : 8 x 0gs Current (A) ROV0HK ROV0H7K max leakage current ROV0HK ROV0H7K max clamping voltage Imax. (A) Pulse Rectangular Wave (µs) Voltage (V) ROV0H3K ROV0H39K ROV0H3K ROV0H7K ROV0H7K ROV0HK ROV0HK ROV0HK ROV0HK ROV0HK ROV0H7K ROV0H3K ROV0H39K ROV0H3K ROV0H7K ROV0HK ROV0HK ROV0H0K ROV0HK ROV0HK ROV0HK ROV0HK 0 TEST CURRENT WAVEFORM ROV0H0K ~ A : DIRECT CURRENT - 3 ROV0HK ~ A : 8 x 0gs Current (A) Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 90 Tel: (0) 7-8 Fax: (0) 7-8 of
7 Document: SCD Rev. A June 30, 003 DIMENSIONS A max. C max. A max. C max. B max. B l D l D E KINKED LEAD TYPE Dimension Table A max. 7. l ± E ±.0.0 B max..0 D min..0 D min..0 E STRAIGHT LEAD TYPE (-S) Table of C max., F, and B max. F Type No. C max. F±0.8 B max. M L K K K K.0.. 0K.0.. K..7. K K K K... 8K..0. 0K..0. K.3.. K... 7K K K K K K...0 7K...0 K... K.9.8. K K K Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 90 Tel: (0) 7-8 Fax: (0) of
8 PACKAGING Document: SCD Rev. A June 30, 003 in mm max. 3max. 3max. Arbor hole max. max. Packaging Bulk (box) Reel Ammo Box size (mm) 90 x x 30 x 30 x x 0 x Carton size (mm) 3 x 38 x 0 37 x 37 x 90 3 x x 8 One carton with Boxes Boxes ( reels) Boxes Part Number Bulk (box) Reel Ammo ROV0-M to ROV0-70K, ROV0HM to ROV0H70K ROV0-0K to ROV0-K, ROV0H0K to ROV0HK ROV0-K to ROV0-33K, ROV0HK to ROV0H33K ROV0-3K to ROV0-39K, ROV0H3K to ROV0H39K ROV0-3K to ROV0-7K, ROV0H3K to ROV0H7K ROV0-K to ROV0-7K, ROV0HK to ROV0H7K Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 90 Tel: (0) 7-8 Fax: (0) of
9 Document: SCD Rev. A June 30, 003 TAPE AND REEL DIMENSIONS Symbols Item Value l Cut out length.mm max. H (Kinked lead) Height of kink 3.mm max. H o (Kinked lead) Height to seating plane.0 ± 0.mm H o (Straight lead) Height of component from hole center.0-.0mm h Front to back deviation 0.0 ±.0mm W Carrier tape width W 0 Hold down tape width.0mm W Sprocket hole position W Adhesive tape position 3.0mm max. F Component lead spacing P Pitch of component.7 ±.0mm P 0 Sprocket hole pitch.7 ± 0.3mm P Lead length from hole center to lead 3.8 ± 0.7mm P Length from hole center to disk center.3 ±.3mm D 0 Sprocket hole diameter.0 ± 0.mm d Lead wire diameter 0. ± 0.0mm T Disk thickness See C. max table t Total thickness tape 0.7 ± 0.0mm t Total thickness.mm max. Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 90 Tel: (0) 7-8 Fax: (0) of
10 Document: SCD Rev. A June 30, 003 Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of each product for their applications. Tyco Electronics Corporation assumes no responsibility for the use of its product or for any infringement of patents or other rights of third parties resulting from the use of its product. No license is granted by implication or otherwise under any patent or proprietary right of Tyco Electronics except the right to use such product for the purpose for which it is sold. Tyco Electronics reserves the right to change or update, without notice, any information contained in this publication; to change, without notice, the design, construction, processing, or specification of any product; and to discontinue or limit production or distribution of any product. This publication supersedes and replaces all information previously supplied. Without express written consent by an officer of Tyco Electronics, Tyco Electronics does not authorize the use of any its products as components in nuclear facility applications, aerospace, or in critical life support devices or systems. Tyco Electronics only obligations are those in the Tyco Electronics Standard Terms and Conditions of Sale and in no case will Tyco Electronics be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of its products. R is a trademark of Tyco Electronics Corporation 003 Tyco Electronics Corporation Tyco Electronics Corporation 308 Constitution Drive, Menlo Park, CA 90 Tel: (0) 7-8 Fax: (0) 7-8 of
Raychem Overvoltage Devices. ROV14, ROV14H, ROV14E 14mm Series Metal Oxide Varistors
GENERAL DESCRIPTION The ROV14-XXX (Radial-leaded Metal Oxide Varistor) products are 14mm radial leaded varistor devices suitable for protection of overvoltage transients. ROV devices can provide protection
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. GENERAL DESCRIPTION The ROV14-XXX (Radial-leaded Metal Oxide Varistor) products
More informationSpecification Status: Released
PAGE NO.: 1 OF 6 GENERAL DESCRIPTION BENEFITS Specification Status: Released Helps provide overvoltage fault protection against high energy surges Suitable for sensitive equipment due to excellent impulse
More informationSpecification Status: Released
PAGE NO.: 1 OF 5 GENERAL DESCRIPTION BENEFITS Specification Status: Released Helps provide overvoltage fault protection against high energy surges Suitable for sensitive equipment due to excellent impulse
More informationMulti Layer Varistor Overvoltage Protection Device
GENERAL DESCRIPTION PAGE NO.: 1 OF 5 These s are small, leadless, surface mount packages made of multiple layers of Zinc Oxide, with electrodes between them. They are used to help protect integrated circuits
More informationRaychem Overvoltage Devices. ESD Protector PESD BENEFITS FEATURES APPLICATIONS MATERIALS INFORMATION PART NUMBERING.
BENEFITS Suitable for high speed data transmission applications Longer battery life due to low leakage current Board space savings Help protect sensitive electronic circuits against electrostatic discharge
More informationGas Discharge Tubes GTCX28-XXXM-R05 Series
GTCX28-XXXM-R05 Series Raychem Circuit Protection Products 8mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal
More informationGas Discharge Tubes GTCX25-XXXM-R02 Series
Raychem Circuit Protection 5mm 2Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission lines
More informationGas Discharge Tubes. Features: Benefits: Applications:
TE Circuit Protection 5mm 3Pole GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission lines from
More informationPolySwitch TS600 Overcurrent Protection Devices
R PolySwitch TS600 Overcurrent Protection Devices New surface-mount products for overcurrent protection Raychem introduces the PolySwitch TS600 series to protect sensitive telecommunications equipment
More informationSpecification Status: Released
PAGE NO.: Page 1 of 5 Specification Status: Released BENEFITS Silicon ESD device in an EIA-0402 size rectangular passive component SMT package Standard PCB assembly and rework processes Bi-directional
More informationSpecification Status: Released
PAGE NO.: 1 OF 8 Specification Status: Released Not to be used for new designs. For new design please contact Tyco Electronics Sales BENEFITS Board space savings Help protect sensitive electronic circuits
More informationSiBar Thyristor Surge Protectors. TVBxxxRSC-L Series. Benefits: Features: Applications:
Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction.
More informationSiBar Thyristor Surge Protectors. TVBxxxNSA-L Series. Benefits: Features: Applications:
Raychem Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction.
More informationSiBar Thyristor Surge Protectors. TVBxxxSA-L Series. Benefits: Features: Applications:
Raychem Circuit Protection's SiBar thyristor surge protection devices are designed to help protect sensitive telecommunication equipment from the hazards caused by lightning, power contact, and power induction.
More informationSpecification Status: Released
PAGE NO.: 1 OF 5 Specification Status: Released PIN CONFIGURATION AND DESCRIPTION: D2 хххх Note: D2 is product code xxxx is Batch code P1 Pth P Arm TABLE 1. DIMENSIONS: A B C D E MIN MAX MIN MAX MIN MAX
More informationRUE Selection Guide and Product Data. RUE Selection Guide
Selection Guide and Product Data This section has two parts: A Selection Guide that walks you through the process of selecting the correct RUE device for a circuit. Product Data that outlines electrical
More informationTelecom Fuses. Benefits. Features. Applications
Telecom Fuses The FT600 fuse series is designed to assist telecommunications equipment manufacturers in complying with North American overcurrent protection requirements, including Telcordia GR- 1089,
More informationSpecification Status: Released
PGE NO.: 1 OF 5 PIN CONFIGURTION ND DESCRIPTION: Specification Status: Released Pin Configuration (Bottom View of ) (Top View of ) 2 хххх C (Side View of ) Note: 2 is product code хххх is Batch Code P1
More informationTechnical Paper. PPTC Circuit Protection for Power Management in Portable Communications/PDA Equipment
Technical Paper PPTC Circuit for Power Management in Portable Communications/PDA Equipment PPTC Circuit for Power Management in Portable Communications/PDA Equipment Frank Owen - Marketing Director Raychem
More informationMODEL 4000A & 4001A ACCELEROMETER
MODEL 4000A & 4001A ACCELEROMETER dimensions 4001A Connector Attachment SPECIFICATIONS Silicone MEMS Accelerometer Signal Conditioned Output Temperature Calibrated Low Cost, Lightweight The Model 4000A
More informationM7100 Pressure Transducer
SPECIFICATIONS Performance standard on and off highway engine and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless steel wetted surfaces
More informationDATASHEET PolySwitch RKEF Devices
DTSHEET PolySwitch Devices For use in a wide variety of general electronic products, ranging from industrial controls to battery packs, PolySwitch devices are functionally equivalent to the PolySwitch
More informationBowthorpe EMP surge arrester Distribution metal oxide surge arrester DA0 Series, (IEC)
Energy Division Bowthorpe EMP surge arrester Distribution metal oxide surge arrester DA0 Series, (IEC) Bowthorpe EMP distribution metal oxide surge arrester DA0 series Tyco Electronics Bowthorpe EMP business
More informationDP86 Constant Voltage with Fitting
SPECIFICATIONS 316L SS Wet/Wet Differential Low Pressure 0 100mV Output The DP86 constant voltage with fitting differential pressure sensor is a double-sided, media compatible, piezoresistive silicon pressure
More informationGardian W51. Approvals
Gardian W51 120 V pre-assembled electric heating cables for pipe freeze protection and roof & gutter de-icing Installation Instructions Description Gardian W51 120 V pre-assembled self-regulating heating
More informationD5100 Industrial Differential Pressure Transducer
SPECIFICATIONS 316L Stainless Steel Wetted Surface Voltage, Current, and mv Outputs True Wet/Wet Differential CE Certified (amplified version only) Variety of Pressure Ports and Electrical Connections
More informationD5100 Industrial Differential Pressure Transducer
FEATURES Heavy Industrial CE Approval (amplified only) As Low As ±0.1% Pressure Non Linearity Rugged Construction: Can Withstand 50g Shock/20g Vibration Up to -40 C to +125 C Operating Temperature Range
More informationEnergy Division. Bowthorpe MV Surge Arresters OCP, Open Cage Polymeric series
Energy Division Bowthorpe MV Surge Arresters OCP, Open Cage Polymeric series At the core of the Bowthorpe OCP design is our improved ZnO varistor disk, which has superior thermal and electrical characteristics
More informationDSF xx15.xx xhv Ex-Atex Ex-Atex Certified Two wire Hall Effect Speed Sensor
DSF xx15.xx xhv Ex-Atex Product ID Type # Product # Drawing # DSF 1215.01 SHV Ex-atex (5m) 304Z-05197 113216 DSF 1415.01 AHV Ex-atex S148 304Z-05256 113351 DSF 1615.01 SHV Ex-atex (5m) 304Z-05196 113214
More informationMODEL ACCELEROMETER
MODEL 8711-01 ACCELEROMETER SPECIFICATIONS Industrial IEPE Accelerometer Low Cost, Quick Delivery -55 C to +125 C Operating Range Top Exit Connector DIMENSIONS The Model 8711-01 are internally shielded
More informationSUBMERSIBLE Flush Diaphragm Liquid Level Sensor AST4520
Flush Diaphragm Liquid Level Sensor AST4520 Overview The AST4520 Flush Submersible liquid level sensor is the cost effective solution for level monitoring of turbulent tanks with viscous media. Approved
More informationPT9600. Cable Actuated Encoder Reel. General. Environmental
Cable Actuated Encoder Reel Converts ANY Rotary Encoder to a Linear Position Sensor Linear Stroke Range up to 550 inches (14 m) Mates Virtually ANY Customer Supplied Encoder Factory Supplied Encoder Available
More informationULTRA FAST RECITIFIERS
Applications: 4001 4007 ULTRA FAST RECITIFIERS 4001 4007 Switching Power Supply Power Switching Circuits General Purpose Features: The plastic package carries Underwriters Laboratory Flammability Classification
More informationDSS SERIES. Single Channel Hall Effect Speed Sensor. Product ID
Product ID Type # Product # Drawing # 378Z-05380 DSS 1210.00 STV (5m) 113807 374Z-04996 DSS 1210.02 PHV 112705 374Z-05052 DSS 1210.02 SHV (2m) 112865 378Z-05864 DSS 1210.12 AHV 115675 378Z-05910 DSS 1210.13
More informationM5800 Pressure Transducer with Rotatable Display
Pressure Transducer with Rotatable Display SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and customized Electrical Configurations FEATURES CE Compliance Reverse Polarity Protection
More informationTE Connectivity's AMP NETCONNECT Cable Management
One of the major challenges facing cabling mounting holes installers and maintenance personnel is organizing distribution cables and patch cords in the telecommunications room. TE Connectivity's AMP NETCONNECT
More informationRF one-step BNC/TNC connectors for coaxial cable termination
Easy, quick installation Outstanding cable-retention force Solder-solder connection type (center conductor and braid) RF one-step BNC/TNC connectors for coaxial cable termination Applications RF one-step
More informationM5200 Industrial Pressure Transducer
SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof UL Certified Gage, Sealed, Compound
More informationLOW PRESSURE Intrinsically Safe Transducer AST44LP
Intrinsically Safe Transducer AST44LP Overview The AST44LP is a stainless steel pressure transducer with a wide variety of options. With its rugged construction and the best price-toperformance ratio in
More informationPT9150 (Extended Range)
(Extended Range) Cable Actuated Sensor Extended Ranges Incremental Encoder Linear Position to 1700 inches (4300 cm) Stroke Range Options: 0-600 to 0-1700 inches VLS Option to Prevent Free-Release Damage
More informationINTRINSICALLY SAFE Pressure Transducer / Transmitter AST4401
Pressure Transducer / Transmitter AST4401 Overview The AST4401 is a stainless steel pressure transducer with a wide variety of options. With its rugged construction and best price-toperformance ratio in
More informationFC22 Compression Load Cell
SPECIFICATIONS 10 100 lbf Ranges High Level or mv Outputs Interchangeable Compact Easy to Fixture Design CE Compliance FEATURES Small Size Low Noise Robust: High Over-Range Capability High Reliability
More information1N4001 THRU 1N4007 1N4001 THRU 1N SILICON RECTIFIER. Features:
Features: 4001 THRU 4007 1.0 SILICON RECTIFIER Diffused Junction Low Forward Voltage Drop High Current Capability High Reliability High Surge Current Capability This is a Pb Free Device All SMC parts are
More informationINTRINSICALLY SAFE Pressure Transducer / Transmitter AST4400
Pressure Transducer / Transmitter AST4400 Overview The AST4400 is a stainless steel pressure transducer with a wide variety of options. With its rugged construction and best price-toperformance ratio in
More informationOPERATION MANUAL MODEL & ACCELEROMETER
OPERATION MANUAL MODEL 8011-01 & 8021-01 ACCELEROMETER TE CONNECTIVITY SENSORS///MODEL 8011-01 & 8021-01 ACCELEROMETER 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted
More informationNTC THERMISTOR SENSOR PERFORMANCE
NTC THERMISTOR SENSOR PERFORMANCE Accuracy, Interchangeability, Beta Tolerance, Tolerance Comparison, Stability, Drift, and Moisture Induced Failure When designing the best temperature probe for a specific
More information82 Constant Voltage SPECIFICATIONS. 316L SS Pressure Sensor 19mm Diameter Package 0-100mV Output Absolute and Gage Temperature Compensated
SPECIFICATIONS 316L SS Pressure Sensor 19mm Diameter Package 0-100mV Output Absolute and Gage Temperature Compensated The 82 constant voltage is a 19 mm small profile, media compatible, piezoresistive
More informationOPERATION MANUAL MODEL 8102 ACCELEROMETER
OPERATION MANUAL TE CONNECTIVITY SENSORS/// 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year from date of shipment to original purchaser to
More informationU86B. Urea Dosing SPECIFICATIONS FEATURES APPLICATIONS
SPECIFICATIONS Mountable with O-ring seal Stainless Steel wetted surfaces Amplified ASIC calibrated Absolute, sealed gage Cable option Analog output SENT Output Optional (contact factory for details) FEATURES
More informationTraceTek TT1000 Modular Sensing Cable
LEAK DETECTION powered by Installation Instructions TraceTek TT1000 TraceTek TT1000 Modular Sensing Cable Modular Sensing Cable General Information These instructions explain the proper procedures for
More informationM5800 Pressure Transducer with Rotatable Display
Pressure Transducer with Rotatable Display SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and customized Electrical Configurations Optional Stainless Steel Snubber CE Compliant
More informationFC23 Compression Load Cell
SPECIFICATIONS 50 2000 lbf Ranges High Level or mv Interchangeable Compact Load Button Design Industry Standard Packaging CE Compliance FEATURES Interchangeable Low Noise Robust: High Over-Range Capability
More informationMSP340 Pressure Transducer
Shown with Packard Connector Shown with Packard Connector MSP40 SPECIFICATIONS Low Cost OEM 100% Leak Proof No O-Rings No Silicon Oil No Welds FEATURES One-Piece Stainless Steel Construction Ranges up
More informationHTF3000LF PVH-3.3 TEMPERATURE AND HUMIDITY MODULE
TEMPERATURE AND HUMIDITY MODULE Compliant with RoHS recommendations Based on the rugged HS1101LF humidity sensor, HTF3000LF PVH-3.3 is a dedicated humidity and temperature transducer designed for OEM applications
More informationDSF xx10.xx xhv Ex-Atex Hall Effect Single Channel Speed Sensor
Product ID Type # Product # Drawing # DSF 1210.00 SHV Ex-atex (2m) 374Z-05066 110428F1 DSF 1210.00 SHV Ex-atex (5m) 374Z-05176 110428F1 DSF 1210.00 SHV Ex-atex (10m) 374Z-05590 110428F1 DSF 1410.00 SHV
More informationOPERATION MANUAL MODEL 4610 ACCELEROMETER
OPERATION MANUAL MODEL 4610 ACCELEROMETER TE CONNECTIVITY SENSORS///MODEL 4610 ACCELEROMETER 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year
More informationSeal Kits for BUDI Enclosures
Description BUDI is a product range of compact, wall mountable fiber enclosures for indoor and outdoor use. They are specifically designed for fast deployment and easy customer connection. The FIST management
More informationCable Actuated Sensor Industrial Incremental Encoder Output
Cable Actuated Sensor Output Linear Position up to 175 inches (3 meters) 0-125, 0-175 inch Full Stroke Range Options Designed for Outdoor & IP67 environments In Stock for Quick Delivery! 175-inch model
More informationMSP300 Pressure Transducer
SECIFICATIONS Analog Output or 14-Bit Digital ressure with 11-Bit Temperature Output One iece Stainless Steel Construction Low Cost 17-4H or 316L Stainless Steel Customizable FEATURES One iece Stainless
More informationENERGY PRODUCTS DIVISION. Polymeric Surge Arresters Reliable protection for power equipment upto 800kV
ENERGY PRODUCTS DIVISION LV MV HV Polymeric Reliable protection for power equipment upto 800kV Raychem Polymeric Surge Arrester Safety and reliability are vital in energy industry and Raychem RPG's Energy
More informationTTSIM-1A. TraceTek Sensor Interface Module with Relay. Installation/Operation Instructions. Installation Items (not supplied) Tools Required.
TTSIM-1A TraceTek Sensor Interface Module with Relay Installation Items (not supplied) General Information Installation/Operation Instructions Please read these instructions and keep them in a safe place.
More informationRaychem Heating System
Raychem Heating System Tank Heater (H55207) Approvals F M APPROVED Ordinary and Hazardous Locations lass I, Div. 2, Groups B,, D lass II, Div. 1 & 2, Groups E, F, G lass III All hazardous location applications
More informationMEAS EMITTER ASSEMBLY ELM-4000 SERIES
MEAS EMITTER ASSEMBLY ELM-4000 SERIES SpO2 optical sensor component Dual Drive Lead Frame Construction Pulse Oximetry Component Clear Epoxy Low oxygen level can put a strain on cell functioning including
More informationPT9420 (Extended Range)
(Extended Range) Cable Actuated Sensor Absolute Linear Position to 1700 inches (4300 cm) Stroke Range Options: 0-600 to 0-1700 inches VLS Option to Prevent Free-Release Damage IP68 NEMA 6 Protection Hazardous
More informationMSP100 Pressure Transducer
SPECIFICATIONS Analog and 14-Bit Digital Output Available Small Size Low Cost 316L Stainless Steel or 17-4PH FEATURES Single Piece Construction; No Welds, No Oil 100% Stainless Steel Isolation for Harsh
More informationTS105-10L5.5MM Thermopile Sensor
SPECIFICATIONS Thermopile IR-Sensor For Contactless Temperature Measurement Single Element For Industrial Pyrometers Silicon Lens Accurate Reference Sensor Thermopiles are mainly used for contactless temperature
More informationSGJ. 80, 120-inch Stroke Range Options. Polycarbonate Enclosure IP67. In Stock for Quick Delivery. General. CANbus Specifications
Cable Actuated Sensor Compact Mid-Range String Pot Absolute Position 80, 120-inch Stroke Range Options Polycarbonate Enclosure IP67 In Stock for Quick Delivery General Stroke Range Options Accuracy Repeatability
More informationHM1500LF Relative Humidity Module
SPECIFICATIONS Small size product Product free from Lead, Cr(6+), Cd and Hg Humidity calibrated within +/-2% @55%RH Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5Vdc supply Ratiometric to voltage
More informationUV-SCE. Ultra-Violet light, Resistant TECHNICAL DATASHEET. Heat Shrink Identification Marker Sleeves
UV-SCE Ultra-Violet light, Resistant Heat Shrink Identification Marker Sleeves TECHNICAL DATASHEET Revision 4, March 2015 UV-SCE Ultra-Violet Light Resistant, Heat Shrink Identification Marker Sleeves
More informationStandard SPECIFICATIONS FEATURES APPLICATIONS
SPECIFICATIONS PC Board Mountable Pressure Sensor 0-50 mv Output Voltage Excitation Gage, Absolute, and Differential Temperature Compensated FEATURES Dual-in-Line Package 0ºC to 50ºC Compensated Temperature
More informationTwo Circuit Heavy Duty Burner Connector
Product 108-1056 11 Oct.16 Rev B Specification EC 0990-0059-05 Two Circuit Heavy Duty Burner Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the
More informationFIST-EDSA-D4. 3 Feeder cable/ducts (max 16 mm) 4 Drop cable (DB cable or guiding tubes 5-8 mm) 5 Adding drop cable. 6 Gel part replacement
FIST-EDSA I N S T A L L A T I O N I N S T R U C T I O N FIST-EDSA-D4 Content 1 Introduction 2 Kit content 3 Feeder cable/ducts (max 16 mm) 4 Drop cable (DB cable or guiding tubes 5-8 mm) 5 Adding drop
More informationSKJ. Specifications. Stroke Range Options 250 inches (6.4 m), 400 inches (10.2 m)
Cable Actuated Sensor Linear Position to 400 inches (10 m) Compact Design Simple To Install User Adjustable Measuring Cable Orientation IN STOCK for Quick Delivery! Specifications Stroke Range Options
More informationOPERATION MANUAL Model 8011 & mA
OPERATION MANUAL Model 8011 & 8021 4-20mA TE CONNECTIVITY SENSORS/// MODEL 8011 & 8021 4-20MA 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year
More informationORIGA-SENSOFLEX Displacement Measuring System for Cylinder Series OSP-P
ORIGA-SENSOFLEX Displacement Measuring System for Cylinder Series OSP-P Contents Description Data Sheet No. Page Overview P-1.50.001E 117-118 Technical Data SFI-plus P-1.50.002E-1, 2 119-120 Dimensions
More informationPT9101. General. Potentiometer Cycle Life 250,000 Maximum Retraction. Weight, Aluminum (Stainless 8 lbs. (16 lbs.) max. Electrical
Cable Actuated Sensor Absolute Linear Position to 550 inches (1400 cm) Aluminum or Stainless Steel Enclosure Options VLS Option to Prevent Free-Release Damage IP68 NEMA 6 Protection General Full Stroke
More informationMS1471 SPECIFICATIONS. PC Board Mountable Pressure Sensor 0-60 mv Output Gage and Absolute Low Cost
SPECIFICATIONS PC Board Mountable Pressure Sensor 0-60 mv Output Gage and Absolute Low Cost The MS1471 is a piezoresistive silicon pressure sensor packaged in a surface mount configuration. It is intended
More informationC A Heating Cable Gland Kit
C75-100-A Heating Cable Gland Kit Installation Instructions Description The C75-100-A is a NEMA 4X rated gland kit used to transition heating cables into a junction box when making connections off of a
More informationSub psi SPECIFICATIONS
SPECIFICATIONS PC Board Mountable Pressure Sensor 40 mv Output Typical Differential Pressures Metal Tube and Ceramic Barbed Ports Temperature Compensated The 1210 sub PSI is a temperature compensated,
More informationAquiTron. AT-WM Water Monitor DATA SHEET
AquiTron AT-WM Water Monitor DATA SHEET AT-WM Water Monitor The Aquitron AT-WM is a leak monitoring system that has been specifically designed to comply with the requirements of BREEAM (BRE Environmental
More informationMSP100 Pressure Transducer
SPECIFICATIONS Analog and 14-Bit Digital Output Small Size Low Cost 316L Stainless Steel or 17-4PH FEATURES Single Piece Construction; No Welds, No Oil 100% Stainless Steel Isolation for Harsh Chemical
More information154BC SPECIFICATIONS. Please refer to the 154N uncompensated and constant voltage datasheets for more information on different features of the 154.
SPECIFICATIONS Low Cost 316L Stainless Steel or Titanium 19mm Diameter Package 0-100mV Output Gage and Absolute Wide Compensated Temperature Range The 154BC is a 19mm small profile, media compatible, piezoresistive
More informationU5300 Industrial Pressure Transducer
FEATURES Heavy Industrial CE Approval 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output ±0.1% Accuracy ±0.5% Total Error Band Compact Outline -40 C to +125 C
More informationRoHS CERTIFICATE OF COMPLIANCE FOR INTELLITOUCH SUPER FLAT PROFILE SCREENS
RoHS CERTIFICATE OF COMPLIANCE FOR INTELLITOUCH SUPER FLAT PROFILE SCREENS TITLE: NUMBER: REVISION: RoHS Certificate of Compliance for IntelliTouch Super Flat Profile Screens ES500345 B Sheet 1 of 6 Change
More informationHM1520LF Relative Humidity Module
SPECIFICATIONS Tubular form for through wall mounting Product free from Lead, Cr(6+), Cd and Hg Calibrated, linear voltage for easy electronic interface Typical 1 to 1.6 Volt DC output for 0 to 20% RH
More information86A SPECIFICATIONS. 316L SS Pressure Sensor Small Profile V High Level Output Gage, Absolute ASIC Calibrated
(Image displays Absolute type) 86A SPECIFICATIONS 316L SS Pressure Sensor Small Profile 0.5-4.5V High Level Output Gage, Absolute ASIC Calibrated The 86A is a small profile, media compatible, piezoresistive
More informationMains Power Filter 970MF10 970MF20. Installation Instructions
Mains Power Filter Installation Instructions and Table of Contents 1.0 Warnings... 3 2.0 Introduction... 3 3.0 Quick Installation Overview... 3 4.0 Typical Installations... 3 5.0 Protection Concepts...
More informationPT101. General. Full Stroke Range Options. Potentiometer Cycle Life Maximum Retraction Acceleration. Electrical
Cable Actuated Sensor Absolute Linear Position Classic Stringpot Design Stroke Range Options: 0 2 to 0 100 inches Powder Painted & Anodized Aluminum Enclosure Industrial Automation & Testing Applications
More informationJan05 Rev A EC
Product Specification Two Circuit Heavy Duty Burner Connector 108-1056 12Jan05 Rev A EC 0990-0059-05 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the
More informationOPERATION MANUAL MODEL 3255A ACCELEROMETER
OPERATION MANUAL MODEL 3255A ACCELEROMETER TE CONNECTIVITY SENSORS /// MODEL 3255A ACCELEROMETER 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one
More information86BSD Digital Output
SPECIFICATIONS Stainless steel with O-ring seal Pressure/temperature read-out Digital output ASIC calibrated Absolute, gage Cable/connector option Low power option 16mm diaphragm diameter The 86BSD is
More informationBowthorpe EMP surge arrester Distribution metal oxide surge arrester DA1 Series, (IEC)
Energy Division Bowthorpe EMP surge arrester Distribution metal oxide surge arrester DA1 Series, (IEC) Bowthorpe EMP distribution metal oxide surge arrester DA1 series Tyco Electronics Bowthorpe EMP business
More informationJBM-100-LBTV2 Power Connection, Powered Splice, Dual Power Connection, or Splice with Junction Box
JBM-100-LBTV2 Power Connection, Powered Splice, Dual Power Connection, or Splice with Junction Box Installation Instructions Description The JBM-100-LBTV2 is a Type 4X-rated connection kit. It is designed
More informationSPECIFICATIONS. SENSOR SOLUTIONS ///LM Page 1 09/2015
SPECIFICATIONS 316L SS Pressure Sensor with PVC Threads Small Profile 4.5V (typ) High Level Output Gage, Absolute, Sealed Gage ASIC Calibrated Variety of Cable Lengths The LM incorporates stainless steel
More informationAA-480-XX OUTDOOR THERMOELECTRIC COOLER ASSEMBLY USER S MANUAL
AA-480-XX OUTDOOR THERMOELECTRIC COOLER ASSEMBLY USER S MANUAL Table of Contents Introduction 3 Incoming Inspection 3 General Safety & Warnings 3 Technical Specifications 4 Installation and Operation Instructions
More information316L SS Pressure Sensor High Pressure 0-100mV Output Absolute
SPECIFICATIONS 316L SS Pressure Sensor High Pressure 0-100mV Output Absolute The 89 uncompensated is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless
More information154BC SPECIFICATIONS FEATURES APPLICATIONS STANDARD RANGES
SPECIFICATIONS Low Cost 316L Stainless Steel or Titanium 19mm Diameter Package 0-100mV Output Gage and Absolute Wide Compensated Temperature Range FEATURES O-Ring Mount -20ºC to +85ºC Compensated Temperature
More informationRaychem heat-shrinkable medium voltage terminations IXSU-F/OXSU-F for indoor and out door applications for polymeric cables up to 42 kv
Energy Division Raychem heat-shrinkable medium voltage terminations IXSU-F/OXSU-F for indoor and out door applications for polymeric cables up to 42 kv Our Raychem heat-shrinkable medium voltage terminations
More information