Weed Model N9013. Surface Mount Thermocouple. Nuclear Qualified

Transcription

1 DELIVERING CRITICAL MEASUREMENTS Nuclear Qualified Weed Model N9013 Surface Mount Thermocouple Strap-on Mounting Thermocouple Types: J, K, T and E IEEE & 1983, IEEE & 1987 and NUREG 0588 Qualified Easy Installation & Removal Available for Non-safety Related Applications Nuclear Sensors & Process Instrumentation

2 Weed Model N9013 Surface Mount Thermocouple Ultra Electronics, Nuclear Sensors & Process Instrumentation s (NSPI) Model N9013 thermocouple strap-on temperature sensor is very convenient for the measurement of surface temperatures of tanks, pipes, motors, bearings, and various other surface mount applications. The easy strap-on installation method makes it very cost effective to use the Model N9013 for temporary, semipermanent or permanent temperature measurements. The N9013 has been environmentally and seismically qualified for use in 1E applications in nuclear power generating stations. The N9013 can be ordered as non-safety related, offering the same reliability and construction as the safety related version but at a much lower cost. NSPI thermocouples are supplied in accordance with NSPI s Quality Assurance Program which is ISO 9001 Registered. The program is also in compliance with 10CFR50 Appendix B, ANSI N45.2 and ASME NQA-1. Application assistance is available for special applications and design requirements. Assistance includes physical configuration requirements such as leadwire length, quick disconnects and other physical details. Actual installation details can affect measurement accuracy and response time. Such things as thermocouple contact with the surface, surface cleanliness and isolation from ambient temperatures may cause variations in accuracy and response times. For the best performance consult NSPI for application assistance. 2

3 Weed Model N9013 Surface Mount Thermocouple Thermocouple Specifications Thermocouple Type Wire Material Wire Insulation Color (ANSI) Temperature Range ANSI Standard Limits of Error J Iron (+) Constantan (-) White 32 to 1400 F 0 to 760 C ±2.2 C or 0.75% K Chromel (+) Alumel (-) Yellow 32 to 2300 F 0 to 1260 C ±2.2 C or 0.75% T Copper (+) Constantan (-) Blue 0 to 700 F 0 to 370 C ±1.0 C or 0.75% E Chromel (+) Constantan (-) Purple 32 to 1600 F 0 to 870 C ±1.7 C or 0.5% Tolerances do not include system or installation error. Performance Specifications Item Specifications Accuracy Thermocouple accuracy is defined in Standard ASTM E230. Insulation Resistance Environmental/Seismic Qualification (Applicable Qualification/ Test reports are available upon request) At room temperature and dry external surfaces, the insulation resistance between any terminal and the sensor case will exceed 10 Megohms with 100 VDC applied (ungrounded and exposed tip only). Thermocouples are qualified to IEEE & 1983, and IEEE & 1987 and NUREG 0588 for a design life of 40 years. The thermocouple assembly will withstand 300 Megarads T.I.D. and LOCA conditions. Thermocouples are capable of surviving a maximum combined horizontal and vertical seismic acceleration of 20 g s within a range of 1 to 33 Hz. General Specifications Torque Torque to tighten the standard heavy duty hose clamp is 60 to 84 inch pounds Storage Storage of the thermocouples should be in accordance with ANSI N45.2 Level B Shipping Weight Approximately 0.75 pounds with one foot of flex tubing 3

4 Dimensional Drawings POLYOLEFIN INSULATED STRANDED CONSTANTAN EXTERNAL LEADS WITH POLYOLEFIN JACKET 3.0" (REF.) 1/2 NPT SEAL WELD OR BRAZED TO FITTING "xx" TUBE SOCKET WELD MALE CONNECTOR 45 L WORM DRIVE CLAMP OR CONSTANT TORQUE CLAMP SENSOR HOUSING (SEE DETAIL -A-) WIRING DIAGRAMS TERMINAL BLOCK EXTENSION WIRE TERMINAL BLOCK EXTENSION WIRE THERMOCOUPLE THERMOCOUPLE 4

5 Weed Model N9013 Surface Mount Thermocouple 5

6 Ordering Information N9013 S D Surface Mount Thermocouple Single, 2 wire Dual, 4 wire Type J K T E Iron - Constantan Chromel - Alumel Copper - Constantan Chromel - Constantan Junction Type G U B Grounded Ungrounded Exposed tip Flexible Tubing Length L Inches Leadwire Length (after exiting flexible tubing) XX Inches N9013S J G (Example Model Number) Nuclear Sensors & Process Instrumentation DELIVERING CRITICAL MEASUREMENTS Ultra Electronics NUCLEAR SENSORS & PROCESS INSTRUMENTATION 707 Jeffrey Way, PO Box 300 Round Rock, TX USA Tel: Fax: nuclear@ultra-nspi.com This document is not intended to serve as a design document and is subject to change. Actual specifications are per customer order. Ultra Electronics reserves the right to vary these specifications without notice. Ultra Electronics Printed in USA Rev. 1, Pub /16