SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Transcription

1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TÜV SÜD CERTIFICATION AND TESTING (CHINA) CO., LTD. 1 SHANGHAI BRANCH 3-13 F No. 151 Heng Tong Road Shanghai, , People's Republic of China Testing Location: No Duhui Road Shanghai, , People's Republic of China Jian Qin Phone: ELECTRICAL Valid To: April 30, 2018 Certificate Number: In recognition of the successful completion of the A2LA evaluation process (including an assessment of the laboratory s compliance with A2LA s EPA ENERGY STAR Accreditation Program 2 requirements), accreditation is granted to this laboratory at the location listed above, as well as the satellite laboratory location listed below, to perform the following ENERGY STAR, Safety, EMC, Automotive EMC, FCC, and Protocol testing: Test Technology: ENERGY STAR Testing 2 ENERGY EFFICIENCY Electrical and Photometric Measurements of Solid-State Lighting Products Measuring Luminous Flux and Color Maintenance of LED Packages, Arrays and Modules Projecting Long Term Lumen Maintenance of LED Light Sources ENERGY STAR Program Requirements Product Specification for Lamps (Light Bulbs) Eligibility Criteria Version 2.1 ENERGY STAR Program Requirements Product Specification for Luminaires (Light Fixtures) Eligibility Criteria Version 2.0 IES LM IES LM IES TM Lamp Version 2.1 Luminaries Version 2.0 (A2LA Cert. No ) Revised 02/07/2018 Page 1 of 13

2 ELECTRICAL SAFETY Testing Self-ballasted Lamps and Lamp Adapters UL 1993 Class 2 Power Units UL 1310 Power Units Other than Class 2 UL 1012 INMETRO ordinance for Quality Technical Regulation applicable to Luminaires for Public Road Illumination Safety of Household and Similar Electrical Appliances Part 1: General Requirements Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Electric Irons Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Shavers, Hair Clippers, and Similar Appliances Ordinance INMETRO No. 20 UL UL UL Electric heating appliances UL 499 Household Electric Personal Grooming Appliances UL 859 Motor Operated Household Food Preparing Machines Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines Electric Household Cooking and Food-serving Appliances UL 982 UL 1017 UL 1026 Insect-Control Equipment Electrocution Type UL 1559 Motor-operated Commercial Food-preparing Machines UL 763 Motor-operated Water Pumps UL 778 Movable and Wall or Ceiling-hung Electric Room Heaters UL 1278 Motor-operated Massage and Exercise Machines UL 1647 (A2LA Cert. No ) Revised 02/07/2018 Page 2 of 13

3 ELECTRICAL SAFETY Testing (cont.) Audio, Video, and Similar Electronic Apparatus - Safety Requirements Information Technology Equipment - Safety Part 1: General Requirements Audio/video, information and communication technology equipment Part 1: Safety requirements Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory use Part 1: General Requirements Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory use Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials UL 60065; IEC 60065; EN UL ; IEC ; EN IEC EN UL UL ; IEC ; EN UL Electric Gardening Appliances UL 82 Stationary and Fixed Electric Tools UL 987 Electric Lawn Mowers UL 1447 Electric Chain Saws UL 1662 Part 1: General Requirements Part 2-1: Particular Requirements for Drills and Impact Drills Part 2-2: Particular Requirements for Screwdrivers and Impact Wrenches Part 2-3: Particular Requirements for Grinders, Polishers, and Disk-type Sanders Part 2-4: Particular Requirements for Sanders and Polishers other than Disk-type UL UL UL UL UL (A2LA Cert. No ) Revised 02/07/2018 Page 3 of 13

4 ELECTRICAL SAFETY Testing (cont.) Part 2-5: Particular Requirements for Circular Saws Part 2-6: Particular Requirements for Hammers Part 2-8: Particular Requirements for Shears and Nibblers Part 2-11: Particular Requirements for Reciprocating Saws Part 2-13: Particular Requirements for Chain Saws Part 2-14: Particular Requirements for Planers Part 2-15: Particular Requirements for Hedge Trimmers Part 2-16: Particular Requirements for Tackers Part 2-17: Particular Requirements for Routers and Trimmers Part 2-19: Particular Requirements for Jointers Part 2-22: Particular Requirements for Cut-off Machines Part 2-23: Particular Requirements for Die Grinders and Small Rotary Tools UL UL UL UL UL UL UL UL UL UL UL UL (A2LA Cert. No ) Revised 02/07/2018 Page 4 of 13

5 ELECTRICAL SAFETY Testing (cont.) Safety Part 1: General requirements Safety Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches Safety Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type Safety Part 2-5: Particular requirements for hand-held circular saws Safety Part 2-11: Particular requirements for hand-held reciprocating saws Safety Part 2-14: Particular requirements for hand-held planers Safety Part 3-1: Particular requirements for transportable table saws - Safety - Part 3-4: Particular requirements for transportable bench grinders Safety Part 3-6: Particular requirements for transportable diamond drills with liquid System IEC EN UL UL UL UL UL UL UL IEC EN UL UL (A2LA Cert. No ) Revised 02/07/2018 Page 5 of 13

6 ELECTRICAL SAFETY Testing (cont.) Safety Part 3-9: Particular requirements for transportable mitre saws Safety Part 3-10: Particular requirements for transportable cut-off machines UL UL Accreditation is granted to this laboratory at the location listed above as well as the satellite laboratory location listed below: No.16, Lane 1951 Duhui Road Shanghai, , People's Republic of China Jian Qin Phone: Test Technology: Electromagnetic Compatibility Basic EMC Testing Electromagnetic compatibility (EMC) Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments Electromagnetic compatibility (EMC) Part 6-2: Generic standards - Immunity for industrial environments Electromagnetic compatibility (EMC) Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial Environments Electromagnetic compatibility (EMC) Part 6-4: Generic standards - Emission standard for industrial environments Electrical equipment for measurement, control and laboratory use - EMC requirements Part 1: General requirements Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low voltage distribution systems IEC ; EN IEC ; EN IEC ; EN IEC ; EN IEC ; EN IEC ; EN (A2LA Cert. No ) Revised 02/07/2018 Page 6 of 13

7 Electromagnetic Compatibility (cont.) Basic EMC Testing (cont.) Industrial, scientific and medical equipment-radiofrequency disturbance characteristics - Limits and methods of measurement Vehicles, boats and internal combustion engines- Radio disturbance characteristics - Limits and methods of measurement for the protection of offboard receivers Electromagnetic compatibility Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission Electromagnetic compatibility Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment Equipment for general lighting purposes EMC immunity requirements Information technology equipment Radio disturbance characteristics - Limits and methods of measurement Information technology equipment Immunity characteristics - Limits and methods of measurement Information technology equipment (ITE) - Limits and methods of measurement FCC Part 15, Unintentional Radiators FCC Part 15, Intentional Radiators below 26.5GHzexcept Part 15D and Part 15E (DFS) General requirements for compliance of radio apparatus License-exempt radio apparatus (all frequency bands): Category I equipment License-exempt radio apparatus: Category II equipment CISPR 11; EN CISPR 12; EN CISPR 14-1; EN CISPR 14-2; EN CISPR 15; EN IEC 61547; EN CISPR 22; EN CISPR 24; EN ICES-003 ANSI C ANSI C ; KDB Publication RSS-Gen RSS-210 RSS-310 (A2LA Cert. No ) Revised 02/07/2018 Page 7 of 13

8 Electromagnetic Compatibility (cont.) Basic EMC Testing (cont.) Electromagnetic compatibility and Radio Spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements Electromagnetic compatibility and Radio Spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 khz and 246 GHz Electromagnetic compatibility and Radio Spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: specific conditions for Broadband Data Transmission Systems EN EN EN Harmonic Current Emissions IEC ; EN Voltage Changes, Voltage Fluctuations and Flicker IEC ; EN Electrostatic Discharge (ESD) Immunity IEC ; EN Radiated, Radio-frequency, Electromagnetic Field Immunity IEC ; EN Electrical Fast Transient/Burst Immunity IEC ; EN Surge Immunity IEC ; EN Immunity to conducted disturbances, induced by radio-frequency fields IEC ; EN Power Frequency Magnetic Field Immunity IEC ; EN Voltage Dips, Short Interruptions and Voltage Variations IEC ; EN (A2LA Cert. No ) Revised 02/07/2018 Page 8 of 13

9 Automotive EMC Testing Electrostatic Discharge (ESD) ISO 10605; TL 82466, TL 81000; ISO 13766; ISO 14982; EN 13309; GB/T Conducted Emissions CISPR 25; TL 965, TL 81000; EN 55025; GB/T Voltage Transient Emissions ISO ; TL 82066, TL 81000; EN 50498; GB/T Radiated Emissions CISPR 25; 2004/104/EC Annex VII (Broadband); 2004/104/EC Annex VIII (Narrowband); ECE Regulation 10 Annex 7 (Broadband); ECE Regulation 10 Annex 8 (Narrowband); ISO Annex D (Broadband); ISO Annex E (Narrowband); ISO Annex D (Broadband); ISO Annex E (Narrowband); EN Annex D (Broadband); EN Annex E (Narrowband); TL 965, TL 81000; EN 50498; EN 55025; GB/T Magnetic Fields Emissions B (A2LA Cert. No ) Revised 02/07/2018 Page 9 of 13

10 Automotive EMC Testing (cont.) Bulk Current Injection (BCI) ISO ; ECE Regulation 10 Annex 9; 2004/104/EC Annex IX; TL 82166, TL 81000; ISO 14982; EN 13309; GB/T Absorber-Lined Shielded Enclosure (ALSE) (up to 3200 MHz and 200V/m) ISO ; ECE Regulation 10 Annex 9; 2004/104/EC Annex IX; TL 82166, TL 81000; ISO 13766; ISO 14982; EN 13309; GB/T Electrical Load ISO ; GMW 3172; VW Magnetic Field Immunity ISO ; TL 82566; TL Conducted and Transient Immunity ISO ; ISO ; TL 82366; TL 82066; TL 81000; ISO 13766; ISO 14982; EN 13309; EN 50498; GB/T ; GB/T (A2LA Cert. No ) Revised 02/07/2018 Page 10 of 13

11 Automotive EMC Testing RF Immunity to Hand Portable Transmitters ISO ; TL 81000; B Protocol/Interoperability Communication networks and systems in substations - Part 6: Configuration description language for communication in electrical substations related to IEDs Communication networks and systems in substations - Part 7-1: Basic communication structure for substation and feeder equipment - Principles and models Communication networks and systems in substations - Part 7-2: Basic communication structure for substation and feeder equipment - Abstract communication service interface (ACSI) Communication networks and systems in substations - Part 7-3: Basic communication structure for substation and feeder equipment - Common data classes Communication networks and systems in substations - Part 7-4: Basic communication structure for substation and feeder equipment - Compatible logical node classes and data classes Communication networks and systems in substations - Part 8-1: Specific Communication Service Mapping (SCSM) - Mappings to MMS (ISO and ISO ) and to ISO/IEC Communication networks and systems in substations - Part 10: Conformance testing Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI) IEC , First Edition IEC , First Edition IEC , First Edition IEC , First Edition IEC , First Edition IEC First Edition IEC , First Edition IEC , Edition IEC , Edition IEC , Edition (A2LA Cert. No ) Revised 02/07/2018 Page 11 of 13

12 Protocol/Interoperability (cont.) Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes Communication networks and systems for power utility automation - Part 8-1: Specific communication service mapping (SCSM) - Mappings to MMS (ISO and ISO ) and to ISO/IEC Communication networks and systems for power utility automation - Part 10: Conformance testing Conformance Test Procedures for Client System with IEC interface Conformance Test Procedures for Server Devices with IEC interface Conformance Test Procedures for Client System with IEC Edition 2 interface Conformance Test Procedures for Server Devices with IEC Edition 2 interface IEC , Edition IEC , Edition IEC , Edition IEC , Edition Consulting (UCA) 539-MOC/INC (UCA) OPE/INC (UCA) MOC/INC (UCA) 2 A2LA provides accreditation to the U.S. EPA s Conditions and Criteria for Recognition of Laboratories for the ENERGY STAR Program by verifying an organization s compliance to the related test methods listed above. Accreditation by A2LA does not infer Recognition by the EPA for ENERGY STAR testing. Please verify this organization s recognition status by using the EPA s searchable database, located at On the following types of products: Household Appliances, Tools; Lighting; Electrical Equipment for Measurement, Control and Laboratory Use, Industrial, Scientific and Medical Equipment (ISM), Information Technology Equipment (ITE); Vehicles, Boats, and Internal Combustion Engines; Radio equipment; Intentional and Unintentional Radiators; Construction Machinery; Automotive Components. Protocol testing: Power System Automation Devices and Systems. (A2LA Cert. No ) Revised 02/07/2018 Page 12 of 13

13 Testing Activities Performed in Support of FCC Declaration of Conformity and Certification in Accordance with 47 Code of Federal Regulations and FCC KDB , Appendix A, Table A.1 3 : Rule Subpart/Technology Test Method Maximum Frequency Unintentional Radiators Part 15B ANSI C63.4: GHz Intentional Radiators Part 15C ANSI C63.10: GHz U-NII without DFS Intentional Radiators Part 15E ANSI C63.10: GHz UWB Intentional Radiators Part 15F ANSI C63.10: GHz BPL Intentional Radiators Part 15G ANSI C63.10: GHz White Space Device Intentional Radiators Part 15H ANSI C63.10: GHz 3 Accreditation does not imply acceptance to the FCC equipment authorization program. Please see the FCC website ( for a listing of FCC approved laboratories. (A2LA Cert. No ) Revised 02/07/2018 Page 13 of 13

14 Accredited Laboratory A2LA has accredited TÜV SÜD CERTIFICATION AND TESTING (CHINA) CO., LTD. SHANGHAI BRANCH Shanghai, People's Republic of China for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This laboratory also meets the A2LA R222 - Specific Requirements - EPA ENERGY STAR Accreditation Program. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 24 th day of September President and CEO For the Accreditation Council Certificate Number Valid to April 30, 2018 Revised February 7, 2018 For the tests to which this accreditation applies, please refer to the laboratory s Electrical Scope of Accreditation.