SERIE A03 SERIE SPC/SPR

Transcription

1 Product Catalogue SERIE A03 SERIE SPC/SPR Seismic detectors for indoor perimeter protections

2 2

3 TITOLO PREMISE DEA Security specializes in the production of sensors and electronic processing boards for outdoor and indoor perimeter intrusion detection. The indoor perimeter intrusion detection systems are grouped into two product lines: SERIE A03, seismic sensors with electronic processing boards; SERIE SPC/SPR, seismic sensors with built-in electronics. SERIE A03 is an indoor perimeter system for the protection of doors, windows, glazed surfaces, gratings, walls, ceilings and safes against shock, breakthrough and opening.the system is composed of a wide range of seismic detectors and the relevant processing boards. SERIE A03 sensors do not contain any active electronic components. As a matter of fact, the analysis unit is based on separate electronic boards which allow you to set custom calibrations and programming, making it possible to reach the best performance for each type of protected structure. SERIE SPC/SPR is a line of seismic detectors for the protection of doors, windows and glazed surfaces against shock, breakthrough and opening. Evolution of the proven SERIE A03 sensors and processing boards, SPC/SPR sensors do not need any separate electronics since they are provided with built-in analyser. SERIE SPC/SPR combines in a single device the DEA's advanced detection technology with the wide possibilities of configuration and calibration which, in SERIE A03, are provided by separate processing boards. This allows you to design Point ID systems where each sensor, which corresponds to a single alarm zone, can be calibrated independently of the others. 3

4 4

5 TITOLO Index SERIE A A03B/MAS-C sensor... 8 A03B/AS sensor... 9 A03AS sensor A03GR sensor A03 sensor SE04N board SE03N board SE02N board SERIE SPC/SPR SPC01M sensor SPC01 sensor SPC02M sensor SPC02 sensor SPC03 sensor SPC03E sensor SPR01M sensor SPR01 sensor Spare parts BL3VR battery

6 6

7 SERIE A03 SEISMIC DETECTORS WITH ANALYSIS ELECTRONIC BOARDS 7

8 SERIE A03 A03B/MAS-C Sensor Piezodynamic sensor for the protection of doors and windows against shock, breakthrough and opening. Sensor dimensions: 51 x 31 x 22 mm (L x W x H) Magnetic contact dimensions: 50 x 13 x 16 mm (L x W x H) IP rate: IP3X Connections: 6 conductors + shield Tamper-proof device Sensitivity adjustment Equipped with magnetic contact Colour: white / brown Installation specifications: Distance from the magnetic contact to the sensor: 10 mm Average coverage area: 4 m 2 A03B/MAS-C detector must be coupled with SE04N processing board. A03B/MAS-C sensors are available in the following versions: Part number Description Colour A03BMASC Seismic sensor for doors and windows. Provided with magnetic contact. WHITE MA03BMASC Seismic sensor for doors and windows. Provided with magnetic contact. BROWN 8

9 SERIE A03 A03B/AS Sensor Piezodynamic sensor for the protection of doors and windows against shock and breakthrough. Dimensions: 52 x 31 x 22 mm (L x W x H) IP rate: IP3X Connections: 4 conductors + shield Tamper-proof device Sensitivity adjustment Colour: white / brown Installation specifications: Average coverage area: 4 m 2 A03B/AS sensors are available in the following versions: Part number Description Colour A03BAS Seismic sensor for doors and windows WHITE MA03BAS Seismic sensor for doors and windows BROWN 9

10 SERIE A03 A03AS Sensor Piezodynamic sensor for the protection of masonry walls against breakthrough. Dimensions: 67 x 41 x 27 mm (L x W x H) IP rate: IP3X Connections: 4 conductors + shield Sensor anti-opening device Sensitivity adjustment Internal terminal connections Colour: White Installation specifications: Average coverage area: 1,5 m radius corresponding to approx. 10 m 2 Part number Description Colour A03AS Seismic sensor for walls WHITE 10

11 SERIE A03 A03GR Sensor Piezoceramic sensor for the protection of gratings and metal doors against shock and breakthrough. It is provided with connection cable protected by flexible metal sheath. Suitable for external applications. Sensor technical features: Dimensions: 100 x 33 x 14 mm (L x W x H) Operating temperature: C Sensor IP rate: IP55 Metal housing IP rate: IP34 Connections: 4 conductors + shield Colour: Steel grey Metal sheath technical features: Diameter: 10 mm Material: Galvanized steel with single seam and PVC vacuum covered Colour: Steel grey Installation specifications: Average coverage area: 4 m 2 Part number Description Colour A03GR Seismic sensor for gratings STEEL GREY 11

12 SERIE A03 A03 Sensor Piezodynamic sensor for the protection of glazed surfaces against shock and breakthrough. Dimensions: 48 x 27 x 9 mm (L x W x H) IP rate: IP55 Connections: 4 conductors + shield Colour: white / brown Installation specifications: Average coverage area: 4 m 2 on tempered glass (single-layer) up to 11 mm thick 3 m 2 on safety/shatterproof glass (double-layer) up to 11 mm thick 2 m 2 on shatterproof/bulletproof glass (triple-layer) up to 26 mm thick A03 sensors are available in the following versions: Part number Description Colour A03 Seismic sensor for glazed surfaces WHITE MA03 Seismic sensor for glazed surfaces BROWN 12

13 SE04N Board SERIE A03 High-performance digital processing board which can be used with any SERIE A03 sensor. It is the only one to manage the magnetic contact of A03B/MAS-C sensor. EN :2011 EN : A1:2011 Power supply: 12 Vdc (min 11,0 - max 15,0 V) Current: 20 ma (standby) 55 ma (max) Board dimensions: 104 x 82 mm (B x H) Mounting plate dimensions: 104 x 96 mm (B x H) Inputs: piezo signal line balanced tamper lines external reset sporadic event-count activation control Outputs: shock/breakthrough ALARM opening ALARM tamper ALARM Calibrations/Settings: continuous vibration sensitivity adjustment light shock sensitivity adjustment single event sensitivity adjustment (breakthrough) continuous vibration activation thermal expansion filter activation buzzer activation event-count programming wait-time programming Analysis capability: no 8 piezoceramic sensors of the same model no 15 piezodynamic sensors of the same model Part number SE04N Description Digital processing board 13

14 SE03N Board SERIE A03 Digital processing board compatible with A03, A03GR, A03AS and A03B/AS. EN :2011 EN : A1:2011 Power supply: 12 Vdc (min 11,0 - max 15,0 V) Current: 20 ma (standby) 42 ma (max) Board dimensions: 104 x 82 mm (B x H) Mounting plate dimensions: 104 x 96 mm (B x H) Inputs: piezo signal line tamper balanced lines external reset Outputs: shock/breakthrough ALARM tamper ALARM Calibrations/Settings: continuous vibration sensitivity adjustment light shock sensitivity adjustment single event sensitivity adjustment (breakthrough) continuous vibration activation buzzer activation event-count programming wait-time programming Analysis capability: no 8 piezoceramic sensors of the same model no 15 piezodynamic sensors of the same model Part number SE03N Description Digital processing board 14

15 SERIE A03 SE02N Board Analog processing board. EN :2011 EN : A1:2011 Power supply: 12 Vdc (min 11,0 - max 15,0 V) Curent: 20 ma (standby) 30 ma (max) Board dimensions: 63 x 60 mm (B x H) Mounting plate dimensions: 90 x 60 mm (B x H) Inputs: piezo signal line tamper line (unbalanced) external reset Outputs: shock ALARM tamper ALARM Calibrations/settings: Sensitivity adjustment event-count calibration Managing capability: no 8 piezoceramic sensors of the same model no 15 piezodynamic sensors of the same model Part number SE02N Description Analog processing board 15

16 16

17 SERIE SPC/SPR SEISMIC DETECTORS WITH INTEGRATED ELECTRONICS 17

18 SPC01M Sensor SERIE SPC/SPR Piezodynamic sensor with integrated electronics for the protection of doors and windows against shock, breakthrough and opening. EN :2011 EN : A1:2011 Power supply: 12 Vdc (min 11,0 - max 15,0 V) Current: 20 ma (standby) 26 ma (max) Sensor dimensions: 36 x 103 x 23 mm (L x W x H) Magnetic contact dimensions: 13 x 50 x 11 mm (L x W x H) Connection: terminal board for 10 conductors Inputs: RESET ARM Outputs: shock/breakthrough ALARM opening ALARM tamper ALARM Sensor anti-opening device Anti-removal device Tamper-proof magnetic device Magnetic contact Light shock sensitivity adjustment Strong shock sensitivity adjustment (breakthrough) Event-count programming Thermal expansion filter Continuous vibration detection Alarm memory Colour: white / brown Installation specifications: Distance from the magnetic contact to the sensor: 10 mm Average coverage area: 4 m 2 SPC01M sensors are available in the following versions: Part number Description Colour SPC01M Seismic sensor with integrated electronics for the protection of doors and windows. Provided with magnetic contact WHITE MSPC01M Seismic sensor with integrated electronics for the protection of doors and windows. Provided with magnetic contact BROWN 18

19 SPC01 Sensor SERIE SPC/SPR Piezodynamic sensor with integrated electronics for the protection of doors and windows against shock and breakthrough. EN :2011 EN : A1:2011 Power supply: 12 Vdc (min 11,0 - max 15,0 V) Current: 20 ma (standby) 26 ma (max) Sensor dimensions: 36 x 103 x 23 mm (L x W x H) Connection: terminal board for 8 conductors Inputs: RESET ARM Outputs: Shock/breakthrough ALARM Tamper ALARM Sensor anti-opening device Anti-removal device Tamper-proof magnetic device Light shock sensitivity adjustment Strong shock sensitivity adjustment (breakthrough) Event-count programming Thermal expansion filter Continuous vibration detection Alarm memory Colour: White / Brown Installation specifications: Average coverage area: 4 m 2 SPC01 sensors are available in the following versions: Part number Description Colour SPC01 Seismic sensor with integrated electronics for doors and windows WHITE MSPC01 Seismic sensor with integrated electronics for doors and windows BROWN 19

20 SPC02M Sensor SERIE SPC/SPR Piezodynamic sensor with integrated electronics for the protection of doors and windows against shock, breakthrough and opening. EN :2011 EN : A1:2011 Power supply: 12 Vdc (min 11,0 - max 15,0 V) Current: 16 ma (standby) 26 ma (max) Sensor dimensions: 36 x 103 x 23 mm (L x W x H) Magnet dimensions: 13 x 50 x 11 mm (L x W x H) Connection: terminal board for 10 conductors Inputs: RESET ARM Outputs: Shock/breakthrough ALARM Opening ALARM Tamper ALARM Sensor anti-opening device Magnetic contact Sensitivity adjustment Event-count programming Alarm memory Colour: White / Brown Installation specifications: Distance from the magnetic contact to the sensor: 10 mm Average coverage area: 4 m 2 SPC02M sensors are available in the following versions: Part number Description Colour SPC02M Seismic sensor with integrated electronics for doors and windows. Provided with magnetic contact WHITE MSPC02M Seismic sensor with integrated electronics for doors and windows. Provided with magnetic contact BROWN 20

21 SPC02 Sensor SERIE SPC/SPR Piezodynamic sensor with integrated electronics for the protection of doors and windows against shock and breakthrough. EN :2011 EN : A1:2011 Power supply: 12 Vdc (min 11,0 - max 15,0 V) Current: 16 ma (standby) 26 ma (max) Sensor dimensions: 36 x 103 x 23 mm (L x W x H) Connection: terminal board for 8 conductors Inputs: RESET ARM Outputs: Shock/breakthrough ALARM Tamper ALARM Sensor antiopening device Sensitivity adjustment Event-count adjustment Alarm memory Colour: White / Brown Installation specifications: Average coverage area: 4 m 2 SPC02 sensors are available in the following versions: Part number Description Colour SPC02 Seismic sensor with integrated electronics for doors and windows WHITE MSPC02 Seismic sensor with integrated electronics for doors and windows BROWN 21

22 SPC03 Sensor SERIE SPC/SPR Piezoceramic sensor with integrated electronics for glass break protection. The alarm is restored by switching the power supply off. EN :2011 EN : A1:2011 Power supply: 12 Vdc (min 11,0 - max 15,0 V) Current: 15 ma Sensor dimensions: 41 x 41 x 16 mm (L x W x H) Base dimensions: 43 x 45 x 15 mm (L x W x H) Connection: 6-conductor cable: 2 for power supply, 2 for alarm signal line, 2 for tamper line Sensitivity adjustment Outputs: Shock/breakthrough ALARM Tamper ALARM (for removal) Colour: White Installation specifications: Average coverage area: 3 m 2 on double-layer glass up to 11 mm thick 2 m 2 on reinforced glass up to 26 mm thick Part number Description Colour SPC03 Seismic sensor with integrated electronics for glass break protection WHITE 22

23 SPC03E Sensor SERIE SPC/SPR Piezoceramic sensor with integrated electronics for glass break protection. EN :2011 EN : A1:2011 Power supply: 12 Vdc (min 11,0 - max 15,0 V) Current: 15 ma Sensor dimensions: 41 x 41 x 16 mm (L x W x H) Base dimensions: 43 x 45 x 15 mm (L x W x H) Connection: 6-conductor cable: 2 for power supply, 2 for alarm signal line, 2 for tamper line Sensitivity adjustment Outputs: Shock/breakthrough ALARM Tamper ALARM (for removal) Colour: White Installation specifications: Average coverage area: 3 m 2 on double-layer glass up to 11 mm thick 2 m 2 on reinforced glass up to 26 mm thick Part number Description Colour SPC03E Seismic sensor with integrated electronics for glass break protection WHITE 23

24 SPR01M Sensor SERIE SPC/SPR Self-powered piezodynamic sensor with integrated electronics, for wireless systems. It protects doors and windows against shock, breakthrough and opening. EN :2011 EN : A1:2011 Power supply: 6 Vdc (2 x 3V lithium batteries type CR2032, provided with the sensor) Current: 8-10 µa (standby) Sensor dimensions: 36 x 103 x 23 mm (L x W x H) Magnet dimensions: 13 x 50 x 11 mm (L x W x H) Connection: terminal board for 8 conductors Sensor anti-opening device Magnetic contact Sensitivity adjustment (shock) Event-count programming Outputs: Shock/breakthrough ALARM Opening ALARM Tamper ALARM Alarm memory Colour: White / Brown Installation specifications: Distance from the magnetic contact to the sensor: 10 mm Average coverage area: 4 m 2 The detector does not include a radio transmitter. SPR01M sensors are available in the following versions: Part number Description Colour SPR01M Self-powered seismic sensor for doors and windows. Provided with magnetic contact. WHITE MSPR01M Self-powered seismic sensor for doors and windows. Provided with magnetic contact BROWN 24

25 SPR01 Sensor SERIE SPC/SPR Self-powered piezodynamic sensor with integrated electronics, for wireless systems. It protects doors and windows against shock and breakthrough. EN :2011 EN : A1:2011 Power supply: 6 Vdc (2 x 3V lithium batteries type CR2032, provided with the sensor) Current: 8-10 µa (standby) Sensor dimensions: 36 x 103 x 23 mm (L x W x H) Connection: terminal board for 6 conductors Sensor anti-opening device Sensitivity adjustment (shock) Event-count programming Outputs: Shock/breakthrough ALARM Tamper ALARM Alarm memory Colour: White / Brown Installation specifications: Average coverage area: 4 m 2 The detector does not include the radio transmitter. SPR01 sensors are available in the following versions: Part number Description Colour SPR01 Self-powered seismic sensor for doors and windows WHITE MSPR01 Self-powered seismic sensor for doors and windows BROWN 25

26 SPARE PARTS BL3VR battery 3V lithium battery type CR2032 for SPR01 and SPR01M sensors (2 batteries per sensor are needed). Part number BL3VR Description 3V lithium battery 26

27 2016 DEA Security S.r.l v DEA Security S.r.l. reserve the right to vary at any moment and without notice the information and the specifications herein. All trademarks mentioned herein belong to their owners. Third party brands, product names, trade names, corporate names and company names mentioned may be trademarks of their respective owners or registered trademarks of other companies and are used for purposes of explanation and to the owner's benefit, without implying a violation of copyright law. 27

28 DEA Security S.r.l. Via Bolano, snc Santo Stefano di Magra (SP) - Italy tel fax VAT NO: IT Web: dea@deasecurity.com