FPK KELVIN ADJUSTABLE FLAT PANEL 5 YEAR WARRANTY

Size: px

Start display at page:

Download "FPK KELVIN ADJUSTABLE FLAT PANEL 5 YEAR WARRANTY"

Berenice Austin
6 years ago
Views:

1 FETURES 2.4G Wireless CCT & dimmable LED Flat Panel CRI>80 LM79 & LM80 Compliant nti-yellowing light plate technology Wireless CCT adjustable from 3000K-3500K-4000K-5000K Wireless Dimmability from 100% to 1% 0-10vDC standard dimmable Single, group, zone control Reduces photophobia, headaches due to glare and light stress 5 year warranty OPTIONS Surface mount DESCRIPTION EdgeLit LightPlate technology developed by 3M TM produces unsurpassed even illumination of the lens materials and an ultra low glare factor. This ComfortPanel provides wireless control of both light level and kelvin temperature. Fully dimmable and kelvin adjustable from 3000K to 5000K. Use the remote to control one panel, multiple panels, or a whole floor. EZ setup, excellent savings, personal light environment control. TECHNICL SPECIFICTIONS Housing Finish Mounting Lens Type pplications Die cast aluminium with S/ power coat White RCT & Surface Mount using M40 dder PMM plastic lens with advanced LightPlate Technology for Low Glare Office, classroom, retail, hotel, lobby, restaurant, medical facility ELECTRICL SPECIFICTIONS LED Engine vailable Wattages Kelvin Power Factor mbient temperature vailable Voltages SMD SideLight Technology 2': 36w, 40w, 45w 1x4': 40w, 45w 2x4': 50w, 60w, 72w djustable from K >0.95 non-flicker -200C to 450C vC OPTICL & PERFORMNCE SPECIFICTIONS Lumen Output THD 15 % Efficacy eam ngle 1200 CRI >80 L70 Certifications 3000K 100lm/W 3500K 103lm/W 4000K 107lm/W 5000K 110lm/W L/W 60,000 hours cul, CS, LM80, FCC, CE Light when you need it, savings when you don t. 5 YER WRRNTY

2 3000K 5000K 3000K 3500K 4000K 5000K CCT can be adjusted between 3000K-5000K as you wish. PRODUCT CODE GENERTOR Some combinations of adders may not be possible, for further info. FPK Size Wattage Voltage Options 2X2 36w 40w 45w V4 ( vC) M40 RM(xx) Surface Mount Remote (qty) 1X4 40w 45w 2X4 50w 60w 72w

3 DIMENSIONS - 2X2 FT 603mm 558mm 558mm 603mm Driver box *The minimum distance from the driver junction box to a flammable substance is 2 inches. DIMENSIONS - 1X4 FT Driver box *The minimum distance from the driver junction box to a flammable substance is 2 inches. 1168mm 255mm 301mm 1213mm 10mm 1213mm 190mm 30mm

4 DIMENSIONS - 2X4 FT 30mm 30mm 558mm 190mm 19mm 190mm 10mm 1168mm 1213mm 1213mm 301mm 603mm 10mm Driver box *The minimum distance from the driver junction box to a flammable substance is 2 inches.

5 CEILING RECESS MOUNT cessing LLTION 1.Remove ceiling plaster slab 2. Connect power supply 3. Fix the panel light in ending 江景照明 Jiangjing Lighting 1..Fix 3. Fix the the anchor panel into light target into place right place on the ceiling. 4.Stabilize the 2.Hang panel the panel to ceiling suspending.fix the installation mount on the ceiling with installation kits 1.Remove plastic ceiling anchor. plaster slab 2. Connect power supply 3. Fix the panel light into right pla SUSPENDED MOUNT x4 1.take both profile and from accessory pack. 2.ssembling 3 pleces aluminum profile 1..Fix the anchor into target place on the ceiling. 2.Hang the panel together to ceiling with screw. suspending 3 mounted 3. Fix.Fix the panel the installation light into right mount place on the ceiling 4.Stabilize with the panel installation kits t plastic anchor. 4.Slide panel into frame properly. x4 nel to ceiling suspending 3. djust the length of steel wire.connect 1.take both profile and from accessory pack. s the power supply 5.Fix the last plece of aluminnum profile with screw after panel is well placed. 2.ssembling 3 pleces aluminum profile together with screw. 3 s o

6 l light into right place eiling plaster slab Suspending FPK SURFCE MOUNT 4.Stabilize the panel 1..Fix the anchor into target place on the ceiling. 2. Connect power supply.fix the installation mount on the ceiling with 3. Fix the plastic panel anchor. light into right place 4.Stabilize the panel x4 ing 3. djust the length of steel wire.connect x4 1.take the power both supply profile and from accessory pack. 2.ssembling 3 pleces aluminum profile hor into target place on the ceiling. 2.Hang the panel to ceiling suspending together 1.take both with profile screw. and 3. djust from the accessory length of pack. steel w llation mount on the ceiling with installation kits the power supply r. surface mounted 4.Slide panel into frame properly. profile x43.fix semi-finished frame onto ceiling with screw(plastic anchor for concrete ceiling profile and from only). accessory pack. 2.ssembling 3 pleces aluminum profile 3.Fix semi-finished frame onto together with screw. screw(plastic anchor for conc only). ofile. l into frame properly. 5.Fix the last plece of aluminnum profile with screw after panel is well placed.

7 HNDHELD REMOTE Turn on Turn off Matching code for light Long Hold down pressing the the ID button. The ID LED to keep light remote on the controller s remote will indicator come on. always Continue on,then to hold. turn Power on the on light, panels. release If the the panels button ID flicker, the after sync the is complete. light flash Let twice,matching go of the ID button. code finished.matching code for several lights at the same time is available. Release the code and disconnect light from remote controllerkeep Pressing the button the lights. Group selecting button Grouping Lights(need to finish matching code firstly)turn off lights, keep pressing the group selecting button for 3s, then turn on light to finish grouping. Delay turn-off ll Groups are selected together, then turn on the light, the light will flash to finish releasing the code on Press the button, the delay function works after the light flash once, and the light will be turned off after 10s. Press the button could cancel the delay function. Color temperature selecting/saving fter selecting the color temperature, press the button OFF then turn on the light to save the color temperature. 5000K 4000K 3500K 3000K 25% brightness 50% brightness 75% brightness 100% brightness Increase brightness Decrease brightness Decrease color temperature Increase color temperature * fter turned on, the light will automatically detect the 0-10v dimmer to set brightness,it will get 100% brightness if there is no dimming signal to input the light. * When using 0-10V dimmer to control, light brightness will convert to 0-10V dimmer s current brightess setting. * When using remote controller to control, light brightness will only change from its current brightness rather than remote controller s current brightness setting.

8 WLL REMOTE Turn on Turn off Lights code matching combination keys To Pressing sync the panel buttons to controller, ON + OFF hold simultaneously the ON + to OFF keep remote buttons controller s simultaneously indicator light and always keep on, them trun held on the down. light for The 2 Seconds LED light then will loosen light the up combination on the remote. keys, matching Continue code to finished.matching hold. Power code up panels. with many ll lights panels the will same flicker, time is confirming available. the sync is complete. Release the ON + OFF buttons. at rightness adjustment Press the CCTbutton,color temperature will circularly change among 3000K/3500K/4000K/5000K.fter shutting down it will save the current color temperature. The matching method of hand-hold remote controller and wall-type remote controller NO Grouping Hand-hold controller Wall-type controller ID ID ID ID 5 LL LL + ID *fter 10 seconds of each operation, it will enter the standby power saving mode. If you need to adjust again, please press the ON button, it works after the indicator flashes.

FPK - KELVIN-ADJUSTABLE FLAT PANEL

FPK - KELVIN-ADJUSTABLE FLAT PANEL FPK - KELVIN-DJUSTBLE FLT PNEL FETURES 2.4G Wireless CCT & dimmable LED Flat Panel CRI>80 LM79 & LM80 Compliant nti-yellowing light plate technology Wireless CCT adjustable from 3000K-3500K-4000K-5000K