FPK - KELVIN-ADJUSTABLE FLAT PANEL

Size: px

Start display at page:

Download "FPK - KELVIN-ADJUSTABLE FLAT PANEL"

Amy Lucas
6 years ago
Views:

1 FPK - KELVIN-DJUSTBLE FLT PNEL FETURES 2.4G Wireless CCT & dimmable LED Flat Panel CRI>80 LM79 & LM80 Compliant nti-yellowing light plate technology Wireless CCT adjustable from 3000K-3500K-4000K-5000K Wireless Dimmability from 100% to 1% 0-10vDC standard dimmable Single, group, zone control Reduces photophobia, headaches due to glare and light stress 5 year warranty DESCRIPTION EdgeLit LightPlate technology developed by 3M TM produces unsurpassed even illumination of the lens materials and an ultra low glare factor. This ComfortPanel provides wireless control of both light level and kelvin temperature. Fully dimmable and kelvin adjustable from 3000K to 5000K. Use the remote to control one panel, multiple panels, or a whole floor. EZ setup, excellent savings, personal light environment control. TECHNICL SPECIFICTIONS Housing Finish Mounting Lens Type pplications Die cast aluminium with S/B power coat White RCTB & Surface Mount using M40 dder PMM plastic lens with advanced LightPlate Technology for Low Glare Office, classroom, retail, hotel, lobby, restaurant, medical facility ELECTRICL SPECIFICTIONS LED Engine vailable Wattages Kelvin Power Factor mbient temperature vailable Voltages SMD SideLight Technology 2x2': 36w, 40w, 45w 1x4': 40w, 45w 2x4': 50w, 60w, 72w djustable from K >0.95 non-flicker -200C to 450C vC OPTICL & PERFORMNCE SPECIFICTIONS THD 15 % Efficacy Beam ngle 1200 CRI >80 L70 Certifications L/W OPTIONS Surface mount Optional wall control 60,000 hours cul, CS, LM80, FCC, CE LIGHT WHEN YOU NEED IT, SVINGS WHEN YOU DON'T 148

2 FPK - KELVIN-DJUSTBLE FLT PNEL 3000K 5000K 3000K 3500K 4000K 5000K CCT can be adjusted between 3000K-5000K as you wish. PRODUCT CODE GENERTOR FPK Size Wattage Voltage Options 2X2 1X4 2X4 36w 40w 45w 40w 45w 50w 60w 72w V4 ( vC) RM(xx) M40 Remote (qty) Surface Mount Some combinations of adders may not be possible, quotes@ecopowerled.com for further info. 149

3 FPK - KELVIN-DJUSTBLE FLT PNEL DIMENSIONS - 2X2 FT 603mm 558mm 558mm 603mm Driver box DIMENSIONS - 1X4 FT Driver box 255mm 1168mm 301mm 1213mm 10mm 30mm 190mm 1213mm 150

4 FPK - KELVIN-DJUSTBLE FLT PNEL 30mm DIMENSIONS - 2X4 FT 558mm 30mm 190mm 19mm 190mm 10mm 1168mm 1213mm 1213mm 301mm 603mm 10mm Driver box Some combinations of adders may not be possible, quotes@ecopowerled.com for further info. 151

5 FPK - KELVIN-DJUSTBLE FLT PNEL CEILING RECESS MOUNT g recessing LLTION 1.Remove ceiling plaster slab 2. Connect power supply 3. Fix the panel lig uspending 江景照明 1..Fix 3. Fix the the anchor panel into light target into place right place on the ceiling. 4.Stabilize the panel Jiangjing Lighting2.Hang the panel to ceiling suspending B.Fix the installation mount on the ceiling with installation kits plastic anchor. 1.Remove ceiling plaster slab SUSPENDED MOUNT 2. Connect power supply 3. Fix the panel light into right pla B 1.take both profile and B from accessory pack. 2.ssembling 3 pleces aluminum pro together with screw. face mounted 1..Fix the anchor into target place on the ceiling. 2.Hang the panel to ceiling suspending 3. Fix B.Fix the panel the installation light into mount right place on the ceiling 4.Stabilize with the panel installation kits plastic anchor. x2 x4 3 th 4.Slide panel into frame properly. B x2 x4 5.Fix the last plece of aluminnum profil with screw after panel is well placed. anel to ceiling 1.take suspending both profile and B 3. from djust accessory the length pack. of steel wire.connect 2.ssembling 3 pleces aluminum profile ts the power supply together with screw. 3 s o 152

6 into right place FPK - KELVIN-DJUSTBLE Suspending FLT PNEL ceiling plaster slab 4.Stabilize the panel SURFCE MOUNT 1..Fix the anchor into target place on the ceiling. B.Fix the installation mount on the ceiling with plastic anchor. 2. Connect power supply 3. Fix the panel light into right place 4.Stabilize the pane B B x2 x4 x2 3. djust the length of steel wire.connect x4 the 1.take power both supply profile and B from accessory pack. 2.ssembling 3 pleces aluminum profile 1.take together both profile with screw. and B from accessory pack. chor into target place on the ceiling. surface mounted 2.Hang the panel to ceiling suspending 3. djust the length of steel w tallation mount on the ceiling with installation kits the power supply or. 2. in B3.Fix semi-finished frame onto ceiling with screw(plastic x2 anchor for concrete ceiling only). x4 profile and B from accessory pack. 2.ssembling 3 pleces aluminum profile together with screw. 4.Slide panel into frame properly. 5. w 3.Fix semi-finished frame on screw(plastic anchor for con only). el into frame properly. 5.Fix the last plece of aluminnum profile with screw after panel is well placed. Some combinations of adders may not be possible, quotes@ecopowerled.com for further info. 153

7 FPK - KELVIN-DJUSTBLE FLT PNEL HND-HELD REMOTE Turn on Turn off Matching code for light Hold Long down pressing the ID the button. The ID LED to keep light remote on the remote controller s will come indicator on. always Continue on,then to hold. turn Power on the on light, panels. release If the the panels flicker, button ID the sync after is the complete. light flash Let twice,matching go of the ID button. code finished.matching code for several lights at the same time is available. Release the code and disconnect light from remote controllerkeep Pressing the button together, then turn on the light, the light will flash to finish releasing the code on the lights. Group selecting button Grouping Lights(need to finish matching code firstly)turn off lights, keep pressing the group selecting button for 3s, then turn on light to finish grouping. Delay turn-off Press the button, the delay function works after the light flash once, and the light will be turned off after 10s. Press the button could cancel the delay function. ll Groups are selected Color temperature selecting/saving fter selecting the color temperature, press the button OFF then turn on the light to save the color temperature. 5000K 4000K 3500K 3000K 25% brightness 50% brightness 75% brightness 100% brightness Increase brightness Decrease brightness Decrease color temperature Increase color temperature * fter turned on, the light will automatically detect the 0-10v dimmer to set brightness,it will get 100% brightness if there is no dimming signal to input the light. * When using 0-10V dimmer to control, light brightness will convert to 0-10V dimmer s current brightess setting. * When using remote controller to control, light brightness will only change from its current brightness rather than remote controller s current brightness setting. 154

8 FPK - KELVIN-DJUSTBLE FLT PNEL WLL REMOTE Turn on Turn off Lights code matching combination keys To Pressing sync the panel buttons to controller, ON + OFF hold simultaneously the ON + to OFF keep remote buttons controller s simultaneously indicator light and always keep on, them trun held on the down. light for The 2 Seconds LED light then will loosen light the up combination on the remote. keys, matching Continue code to finished.matching hold. Power code up panels. with many ll lights panels the will same flicker, time is confirming available. the sync is complete. Release the ON + OFF buttons. at Brightness adjustment Press the CCTbutton,color temperature will circularly change among 3000K/3500K/4000K/5000K.fter shutting down it will save the current color temperature. The matching method of hand-hold remote controller and wall-type remote controller NO Grouping Hand-hold controller Wall-type controller ID ID 3+ID ID 5 LL LL + ID * fter 10 Seconds of each operation, it will enter the standby power saving mode. If you need to adjust again, please press the ON button,it works after the indicator flashes. Some combinations of adders may not be possible, quotes@ecopowerled.com for further info. 155

FPK KELVIN ADJUSTABLE FLAT PANEL 5 YEAR WARRANTY

FPK KELVIN ADJUSTABLE FLAT PANEL 5 YEAR WARRANTY FETURES 2.4G Wireless CCT & dimmable LED Flat Panel CRI>80 LM79 & LM80 Compliant nti-yellowing light plate technology Wireless CCT adjustable from 3000K-3500K-4000K-5000K Wireless Dimmability from 100%