SPECIALTY LIGHTING NOTES: A Canadian Manufacturer

Size: px

Start display at page:

Download "SPECIALTY LIGHTING NOTES: A Canadian Manufacturer"

Victor Atkinson
6 years ago
Views:

SDL SERIES LED SLIM DOWNLIGHT SDL series 4 & 6 Energy Star IC rated dimmable slim downlight.

FEATURES 4 and 6 round fixtures built with integral LEDs and an integral driver. Allows for quick install and easy junction box mounting.

2 clearance in ceiling required for driver to fit thru hole. SPECIFICATIONS Default Driver Input Voltage.

95 (standard voltage) Energy Used....................... 4 9W, 6 12W & 15W Halogen equivalent................. 5W, 65W, 85W & 1W Beam Angle.

....................... 4-9W - Warm White 65 lm, Neutral White 7 lm; 6 12W 8 lm/88 lm, 15W 1 lm/11 lm CRI.

....................... ETL & Energy Star Rated.

1 SDL SERIES LED SLIM DOWNLIGHT SDL series 4 & 6 Energy Star IC rated dimmable slim downlight. Designed to fit under studs and in narrow plenums, insulated, drop ceilings and soffits. 5, hour L7 rated lifetime. FEATURES 4 and 6 round fixtures built with integral LEDs and an integral driver. Allows for quick install and easy junction box mounting. Mount fixture by cutting a hole in ceiling and snapping fixture in place by holding back integral clips and placing fixture in hole. 2 clearance in ceiling required for driver to fit thru hole. SPECIFICATIONS Default Driver Input Voltage V AC 6 Hz (Dimmable) Optional Transformer Input Voltage V-347V AC 6 Hz (Not Dimmable) Power factor >.95 (standard voltage) Energy Used W, 6 12W & 15W Halogen equivalent W, 65W, 85W & 1W Beam Angle Light colour options Warm White 27K, Neutral White 41K & Cool White 5K Light output W - Warm White 65 lm, Neutral White 7 lm; 6 12W 8 lm/88 lm, 15W 1 lm/11 lm CRI for the 27K and 82 for the 41K Ambient Operating Temperature F (-4 C) to +14 F (+4 C) Compliance ETL & Energy Star Rated Type IC (Direct Contact with Insulation), Energy Star, Air-Tight ADVANTAGES Dimmable (standard voltage only) cetl & ETL listed, meets all CSA requirements and Energy Star Certified Type IC Rated Approved for Direct Contact with Insulation Pot Light Housing is NOT Required even for Insulated Ceilings Warranty: 1 Year on Residential, 5 Year on Commercial Installations NOTES: 79

2 SDL SERIES LED SLIM DOWNLIGHT SDL series 4 & 6 Energy Star IC rated dimmable slim downlight. Designed to fit under studs and in narrow plenums, insulated, drop ceilings and soffits. 5, hour L7 rated lifetime. Available in white, black or satin nickel ring finishes. DIMENSIONS PRODUCT CODE GENERATOR SDL Size Wattage Kelvin Voltage 4" = 4 6" = 6 9w (4") 12w (6") 15w (6") WW (27K ) NW (4K) CW (5K) V4 (1-277v) V5 (347v) Some combinations of adders may not be possible, quotes@ecopowerled.com for further info. JOB: QUANTITY: DRAWING #: PART #: NOTES/OPTIONS: APPROVED/DATE: 8

ECOSPEC PENDANT & INSPECTION FIXTURE Multi function 25, 4, 5 & 8 watt 4 and 8 architectural pendant style fixture. Available with quick connect stainless steel hanging hardware.

Environment Clean rooms, inspection areas, offices, libraries, classrooms, conference centres, retail ELECTRICAL SPECIFICATIONS Lighting Source Samsung LED Power Factor >.

lumens per watt transluscent lens CRI >85 L7 >1, hours Certifications Approved to CSA and UL standards (UL, or equivalent, marked only when specified) OPTIONS Can be ordered with plug, 1 standard

3 ECOSPEC PENDANT & INSPECTION FIXTURE Multi function 25, 4, 5 & 8 watt 4 and 8 architectural pendant style fixture. Available with quick connect stainless steel hanging hardware. TECHNICAL SPECIFICATIONS Housing Extruded Aluminum Housing Finish Colour Anodized Aluminum (other colours available) Mounting Pendant, suspended or surface mount using multi point bracket Work Environment Clean rooms, inspection areas, offices, libraries, classrooms, conference centres, retail ELECTRICAL SPECIFICATIONS Lighting Source Samsung LED Power Factor >.97 Ambient temperature -3 C to 4 C Dimming 1-1V option Available Voltages 1-277vAC standard; 347v & 48v Options OPTICAL & PERFORMANCE SPECIFICATIONS Luminous Flux 11 Lumens per watt clear lens; 95 lumens per watt transluscent lens CRI >85 L7 >1, hours Certifications Approved to CSA and UL standards (UL, or equivalent, marked only when specified) OPTIONS Can be ordered with plug, 1 standard cord length Dimming (DC -1V,PWM signal or resistance) driver is optional Stainless steel quick connect hanging wire kits Multi point surface or bar mounted bracket Quick link bracket ADVANTAGES 1 year warranty Suspension or multi point surface mountable Easily linkable Constructed of thick extruded aluminum Easy link system allows for unlimited continuous row mounting. Small, quick connect multi point mounting brackets are used to surface mount the fixture in low pro/high density/1+fc inspection and finesse tunnel applications. Figure 1 Typical Inspection Tunnel Application NOTES: 81

4 ECOSPEC PENDANT & INSPECTION FIXTURE Multi function 25, 4, 5 & 8 watt 4 and 8 architectural pendant style fixture. Available with quick connect stainless steel hanging hardware. Figure 2 Typical Inspection Tunnel Application PRODUCT CODE GENERATOR ES Wattages 25w 4w 5w 8w Size Chart L W H 46 6/8 3 3/8 46 6/8 3 3/8 93 5/8 3 3/8 93 5/8 3 3/8 Kelvin NW (4K) CW (3K) Voltage V4 (1-277v) V5 (347v) V6 (48v) Tandem /2 - SINGLE HOUSING T2 - TANDEM (comes with quick link joiner) Options Controls & Dimming B1 Occupancy Sensor B3-1vDC Dimmable B4 Dimming LV Wireless B5(x) Bi Level Dimming - Provide values (x = standby output, Y = activated output) B7 Driver Disconnect - Inline power disconnect (CSA, UL req d for voltages above 15v) Mounting Options M1 Aircraft Cable Set (48 Standard Length) M7 Mounting Bracket for Pendant Mounting M1(xx) Mounting Chain Set (specify length in feet) M21 Mounting Safety Chain (3ft) M26 Mounting Pendant 3/8-in NPT (5/8-in OD) specify length (xx) 6-in increments M36 Aircraft Cable Y (12 standard)?? Multi point mounting bracket Cording Options V6(xx) Flexible Feed Cord (single circuit only, xx = length in feet) V7 Flexible Whip (standard 6 x 3-18guage) V11 Hub for 1/2 NPT Threaded Pipe (3/4 OD) CC(XX)* CUSTOM COLOUR * Insert Custom Colour Code here, RAL/DRYLAC (12 week + delivery or check with MFG) PL Plug End only available with V3 or V4 voltage CRD(xx) Cord (length) (1" standard) PLGTWS Twist Lock Plug Rated For Voltage Requested & Amperage Drawn?? White flexible feed cord - slim Other options are available, consult factory for details info@ecopowerled.com Certifications X6 USA Market X7 Some combinations of adders may not be possible, quotes@ecopowerled.com for further info. Dual CSA/USA Market JOB: QUANTITY: DRAWING #: PART #: NOTES/OPTIONS: APPROVED/DATE: 82

FLP - FLATLINE LED PANEL WITH INTEGRATED DRIVER The clean and elegant design of our FlatLine series LED flat panels provide a modern alternative to traditional fluorescent

Mount recessed, suspended or surface. Perfect, even illumination.

commercial, residential, hospitals, schools ELECTRICAL SPECIFICATIONS Lighting Source Samsung SMD side lit technology Watts 2x2: 27w, 4w 2x4: 4w, 5w Input Voltage 1-277 VAC

5 FLP - FLATLINE LED PANEL WITH INTEGRATED DRIVER The clean and elegant design of our FlatLine series LED flat panels provide a modern alternative to traditional fluorescent troffers. Reaching up to 11lm/w, the 1.9" thickness allows installation of the LED light just about anywhere, especially in small and confined spaces. Mount recessed, suspended or surface. Perfect, even illumination. TECHNICAL SPECIFICATIONS Housing White aluminum frame Finish Colour White Mounting Recessed, suspended and surface mounted Work Environment Retail, storage, data centers, commercial, residential, hospitals, schools ELECTRICAL SPECIFICATIONS Lighting Source Samsung SMD side lit technology Watts 2x2: 27w, 4w 2x4: 4w, 5w Input Voltage VAC Power Factor >.98 Ambient temperature -3C to 4C Available Voltages v standard OPTICAL & PERFORMANCE SPECIFICATIONS Efficacy 27w: 2939L 4w 2x2: 4153L 4w 2x4: 484L 5w: 5227L CRI 8 LM8 >5, hours Certifications cetl, RoHS, CE, DAMP LOCATION RATED, ICC RATED OPTIONS -1vDC Dimmable ADVANTAGES 1 year warranty NOTES: 83

6 FLP - FLATLINE LED PANEL WITH INTEGRATED DRIVER The clean and elegant design of our FlatLine series LED flat panels provide a modern alternative to traditional fluorescent troffers. Reaching up to 11lm/w, the 1.9" thickness allows installation of the LED light just about anywhere, especially in small and confined spaces. Mount recessed, suspended or surface. Perfect, even illumination. DIMENSIONS PHOTOMETRICS 23.7" -15 -/ / " 47.7" 1.9" UNIT:cd 12 C/18, 55.4, C9/27, 54.4,55.2 AVERAGE BEAM ANGLE(5%):11.1 DEG UNIT:cd 12 C/18, 54.8, C9/27, 53.9,54.6 AVERAGE BEAM ANGLE(5%):19. DEG 23.7" -15 -/ / " PRODUCT CODE GENERATOR UNIT:cd 16 C/18, 56.4, C9/27, 58.9,59.7 AVERAGE BEAM ANGLE(5%):115.5 DEG UNIT:cd 12 C/18, 56.4, C9/27, 59.,59.9 AVERAGE BEAM ANGLE(5%):115.6 DEG FLP Size Wattage Kelvin Voltage Options 2x2 2x4 2x2 27w 4w 2x4 4w 5w WW 3K 35K 35K NW 4K CW 5K V4 (1-277v) B3 B7-1vDC Dimmable Driver Disconnect - Inline power disconnect (CSA, UL req'd for voltages above 15v) Packaging Options KO Pack Bulk Approval and Rating Options X6 USA Market X7 Dual CSA/USA Market Certain configurations are available and not listed here, consult factory info@ecopowerled.com Some combinations of adders may not be possible, quotes@ecopowerled.com for further info. JOB: QUANTITY: DRAWING #: PART #: NOTES/OPTIONS: APPROVED/DATE: 84

AC - ANTI-CORROSIVE FIXTURE Anti-corrosive fixture designed for harsh environments such as nattatoriums, pig factories, chicken barns, & car washes.

TECHNICAL SPECIFICATIONS Housing Aluminum & Polycarbonate, Stainless Steel Hardware Finish Colour As shown in picture Lens Type PC - Polycarbonate Mounting Flush, hanging Work Environment Nattatorium

7 AC - ANTI-CORROSIVE FIXTURE Anti-corrosive fixture designed for harsh environments such as nattatoriums, pig factories, chicken barns, & car washes. Linkable via EZ install 1mm cable, available in 2', 3', 4' & 5' lengths, 2-65W, with a frosted low-glare lens (standard 95 lumens per watt), it is suitable to any need. Comes with a 1 year warranty. TECHNICAL SPECIFICATIONS Housing Aluminum & Polycarbonate, Stainless Steel Hardware Finish Colour As shown in picture Lens Type PC - Polycarbonate Mounting Flush, hanging Work Environment Nattatorium = Airborn Chloramite/Chlorine Resistant; Pig Farms, Dairy Farms, Cold Storage, Car Wash, Mining ELECTRICAL SPECIFICATIONS Lighting Source Samsung Watts 2W 3W 4W 5W 65W Power Factor.93 Ambient temperature -3oC to +4oC Available Voltages 1-277vAC; 347vAC & 48vAC OPTICAL & PERFORMANCE SPECIFICATIONS Efficacy 95 Lumens Per Watt; 15 Lumens Per Watt Clear Lens IP Rating 65 CRI >8 Beam Angles 12o L7 >5, hours Lumens per Watt 95L/W Frosted Lens; 15L/W Clear Lens Certifications cul, CE, RoHS, LM79, LM8 OPTIONS Clear Lens Linkable IP65 Cord Hanging Hardware 3K-6K 347V/48V 2'/3'/4'/5' Lengths ADVANTAGES 1 year warranty Corrosion Resistant Coating PC Lens Vandal Resistant Stainless Steel Hardware Over Current Protection Over Temperature Protection Multiple Lengths Quick Connect Cables Wall/Ceiling/Suspended Mounts The aluminum base PC, wrap lens, stainless steel mounting hardware & a patented anti-corrosive finish make this the perfect product to create a clean, modern look. NOTES: 85

8 AC - ANTI-CORROSIVE FIXTURE Anti-corrosive fixture designed for harsh environments such as nattatoriums, pig factories, chicken barns, & car washes. Linkable via EZ install 1mm cable, available in 2', 3', 4' & 5' lengths, 2-65W, with a frosted low-glare lens (standard 95 lumens per watt), it is suitable to any need. Comes with a 5 year warranty. 2w PHOTOMETRICS 4w 3w PA1C Tri-pr oof Light 1. Features Carwash application Applied to corrosion application as chicken farm,pig farm and flour mill. Water proof IP65 rate Special material for corrosion resistance 5w Universal AC input 9-35VAC 65w Suspending and ceiling mounted for convenient installation and maintenance Patented design + Brand driver+ Brand LED Product automatic protection (OVP OLP OTP OCP) 2.Application Carwash Corrosion application Chicken farm Pig farm Flour mill 3.Product Dimension DIMENSIONS A C D B Size A(mm) Size B(mm) Size C(mm) Size D(mm) AC2' 6mm PA1C 6mm Model NO AC3' 9mm PA1C 9mm AC4' 12mm PA1C 12mm PA1C 15mm AC5' - 5W 15mm AC5' - 65W 15mm-A PA1C 15mm-A Some combinations of adders may not be possible, quotes@ecopowerled.com for further info. JOB: QUANTITY: DRAWING #: Copyright C 215Autumn 1 /2 PART #: NOTES/OPTIONS: APPROVED/DATE: 86

9 AC - ANTI-CORROSIVE FIXTURE Anti-corrosive fixture designed for harsh environments such as nattatoriums, pig factories, chicken barns, & car washes. Linkable via EZ install 1mm cable, available in 2', 3', 4' & 5' lengths, 2-65W, with a frosted low-glare lens (standard 95 lumens per watt), it is suitable to any need. Comes with a 5 year warranty. INSTALLATION METHODS - CEILING MOUNTED Drill hole Open hole Electric drill Metal clip Screw Screw driver A: Locate position and drill holes Power OFF B: Attach clips to ceiling Power OFF The min. diameter is 1.mm²/18AWG Min.1.mm²/18AWG Junction Box(User Provide) Metal clip US: N L EU: N L LED Tri-proof light Note : pls put the terminal of power cable into water proof box and use a listed water proof bushing when you link the power C: Install the lamp into the clips. Power OFF D: Adjust the position of the fixture and clean it.. Power ON INSTALLATION C. Linkable METHODS (Model PA1C) - LINKABLE (MODEL PA1C) B A Cable Standard 1. Dimension : 7.5mm<C<9mm 2. US:3*1.6AWG EU:3*1.5mm² 4. VDE UL Standard waterproof outdoor cable C NOTES: 87

10 AC - ANTI-CORROSIVE FIXTURE Anti-corrosive fixture designed for harsh environments such as nattatoriums, pig factories, chicken barns, & car washes. Linkable via EZ install 1mm cable, available in 2', 3', 4' & 5' lengths, 2-65W, with a frosted low-glare lens (standard 95 lumens per watt), it is suitable to any need. Comes with a 5 year warranty. PLS note: Linkable" B" connectors can be ordered as a premade cable with waterproof connectors or installer can make cables onsite by ordering just the waterproof connectors. See below for the maximum number of fixtures that can be linked together: Input Voltage PA1C Body Length (mm) 1VAC/2W 6 Max Qty 12 Size A (mm) Size B (mm) 1 optional Input Voltage VAC PA1C Body Length (mm) 23VAC/2w 6 Max Qty 24 Size A (mm) Size B (mm) 1 optional 1VAC/3W optional 23VAC/3w optional 1VAC/4W optional 23VAC/4w VAC/5W optional 23VAC/5w VAC/65W optional 23VAC/65w optional 1 optional 1 optional PRODUCT CODE GENERATOR AC Length Wattage Kelvin Voltage Options 2' 3' 4' 5' 2'- 2W 3'-3W 4'-4W 5'-5W 5'-65W WW-3K NW-4K CW-5K DL-6K V2 (24vDC) V4 (1-277vAC) V5 (347v) V6 (48v) Electrical & Control Options B Photocell B1 Occupancy Sensor (Side body mount when used with PA1C) B5(xy) Bi Level Dimming - Provide values (x = activated time 3secs-12 minutes, Y = activated output % 2% - 8%) B3 Emergency Lighting Battery Pack Spec Grade* Certain configurations are available and not listed here, consult factory info@ecopowerled.com Wiring Options CRD (xx') AWG14/3 CORD PA1C(Cable A) 1mm Linkable IP65 Cable LNKB (xx') 2 connectors and IP65 Cable *Maximum length is 2' LNK2 Set of 2 connectors only - for installer to make cables Mounting Options M1 Aircraft Cable Set (48" Standard Length) Lens Options P7 Clear Polycarbonate Lens Some combinations of adders may not be possible, quotes@ecopowerled.com for further info. JOB: QUANTITY: DRAWING #: PART #: NOTES/OPTIONS: APPROVED/DATE: 88

AGL - AWAKEN GARAGE & STAIRWAY LIGHTER 4' 4W & 6w polycarbonate lens & polymer body IP65 vapour tight.

TECHNICAL SPECIFICATIONS Housing Polymer body, stainless steel clips & polycarbonate unbreakable lens Finish Colour Clear or Frosted lens on grey polymer body,

processing ELECTRICAL SPECIFICATIONS Lighting Source Epistar or Edison 2835 LED chips Input Voltage Max. 36VDC Power Factor >.

L7 >5, hours LM8 Available IP Rating IP65 LM79 11 lumens per watt (clear lens) Downflux efficiency 98.

battery back up Clear diffuser ADVANTAGES On board occupancy dimming and daylight harvesting. Stand by dimming levels 1% / 2% / 3% / 5%.

11 AGL - AWAKEN GARAGE & STAIRWAY LIGHTER 4' 4W & 6w polycarbonate lens & polymer body IP65 vapour tight. On board microwave motion sensor dim & daylight harvesting field settable sensor provides unprecedented fixture based automated controls. TECHNICAL SPECIFICATIONS Housing Polymer body, stainless steel clips & polycarbonate unbreakable lens Finish Colour Clear or Frosted lens on grey polymer body, stainless steel clips Mounting Flush or pendant mount, ceiling or wall Work Environment Garage structures, stairways, overhangs, canopies, coolers, food processing ELECTRICAL SPECIFICATIONS Lighting Source Epistar or Edison 2835 LED chips Input Voltage Max. 36VDC Power Factor >.95 Ambient temperature - 3oC to 4oC Available Voltages v standard, v OPTICAL & PERFORMANCE SPECIFICATIONS Luminous 1-13 LM/W CRI >83 Beam Angle 15o L7 >5, hours LM8 Available IP Rating IP65 LM79 11 lumens per watt (clear lens) Downflux efficiency 98.4%* clear lens; 88% frosted lens **Frosted lens standard Certifications cetl, TUV-CE, CB, ROHS, SAA C, OPTIONS Microwave motion sensor DALI Dimming Emergency battery back up Clear diffuser ADVANTAGES On board occupancy dimming and daylight harvesting. Stand by dimming levels 1% / 2% / 3% / 5%. Full on periods 5s / 3s / 9s / 3min / 2min / 3min. Daylight sensor Lux levels 5 / 1 / 3 / 5Lux Vandal resistant Injection mould polycarbonate prismatic diffuser Stainless steel hardware 1 year warranty Built in, fully site settable, IR Sensor with wide range detection. Dim on idle and built in daylight harvesting. Works with a frosted or clear lens. NOTES: 89

SENSOR SENSOR COVERAGE AREA - - CEILING MOUNT MOUNT (metres) PRODUCT CODE GENERATOR AGL Wattage Kelvin Voltage Options 4w 6w NW-4K CW-5K DL-6K V4 (1-277vAC) V5 (2-48vAC) B7 B3 Ballast Disconnect -

12 AGL - AWAKEN GARAGE & STAIRWAY LIGHTER 4' 4W & 6w polycarbonate lens & polymer body IP65 vapour tight. On board microwave motion sensor dim & daylight harvesting field settable sensor provides unprecedented fixture based automated controls. SENSOR SENSOR COVERAGE AREA - - CEILING MOUNT MOUNT (metres) PRODUCT CODE GENERATOR AGL Wattage Kelvin Voltage Options 4w 6w NW-4K CW-5K DL-6K V4 (1-277vAC) V5 (2-48vAC) B7 B3 Ballast Disconnect - inline power disconnect (CSA, UL req'd for voltages above 15v) Emergency Lighting battery pack spec grade L1 Clear lens Approval and Rating Options X6 USA Market X7 Dual CSA/USA Market Certain configurations are available and not listed here, consult factory info@ecopowerled.com SENSOR SETTINGS: You can request preset factory outputs by providing the following: Standby dimming levels (SBDL) 1%/2%/3%/4%/5%. Full on periods (FOP) 5sec/5min/1min/3min/1hr and Daylight sensor Lux levels (DLSL) 5/1/3/5Lux.eg Part # AGL4WCWV4-SBDL(2%)FOP(1min)DLSL(3LUX) = Fixture will idle at 2% output, when movement is detected the fixturewill go to 1% output for 1 minutes then return to 2% output. When 3 Lux or greater is detected, fixture will dim to the SBDL preset and will not go to 1% when motion is detected. When <3Lux is detected, fixture will go to 1% output when motion is detected. Some combinations of adders may not be possible, quotes@ecopowerled.com for further info. JOB: QUANTITY: DRAWING #: PART #: NOTES/OPTIONS: APPROVED/DATE: 9

Premium. Universal LED Vapor Tight T20G. Commercial lighting Industrial lighting Vapor tight light Linear High Bay Canopy

Premium. Universal LED Vapor Tight T20G. Commercial lighting Industrial lighting Vapor tight light Linear High Bay Canopy Universal LED Vapor Tight T20G Commercial lighting Industrial lighting Vapor tight light Linear High Bay Canopy E465485 Premium MULTI INSTALLATION WAYS TO SAVE YOUR LABOR COST. The T20G is a tri-proof