MIG-29 CHRONO RONDA 5130.D SWISS MADE WATCHES

Transcription

1 english USER MANUAL MIG-9 CHRONO MIG FAMILY MOVEMENT RONDA 50.D SWISS MADE WATCHES

2 We would like to thank you for choosing an exclusive AVIATOR watch. Your timepiece was made and tested using meticulous techniques and premium materials of which we assure the authenticity. We certify that your AVIATOR watch is guaranteed against material and manufacturing defects for 4 months starting from the date of purchase from an official authorised dealer.during this period of time, the repairs and exchange of defective parts under warranty will be carried free of charge. This excludes failures due to accidents or careless use. To fulfil this requirement with any of our international distributors and service centres, your watch must be accompanied by the international guarantee certificate/card signed by the authorised dealer where the watch was purchased. The shipping and insurance expenses will be charged to the owner of the watch. AVIATOR/ BURAN SA and the authorised distributors reserve all rights for repair, in accordance with this warranty. IMPORTANT: This warranty does not cover the following parts: -Damages and or failure in working due to wrong repairing or tampering, to careless use, to negligence, to changes made to the original structure of the case or band or to intervention made by people who are not authorised by AVIATOR/BURAN SA; -Damages to the lens, breaking or scratching on the case, on the ban, on the buckle or on the plating due to wearing or to bad use of the watch; -Life of the battery in watches with quartz movement; -Wearing of leather, textile, rubber or stainless steel band. SWISS MADE WATCHES

3 Descripion of the display and control buttons Minute hand Hour hand Hour and minute counter Center stop-second Alarm and reference time Push-button A Crown Push-button B Second hand Date 50.D Multifunction movement The alarm and chronograph are combined in Cal and 50.B.All functions can be operated with the push-buttons and crown. Initial status (chronograph hands at zero position) - start the chronograph with push-button A - switch the a larm on and off with push-button B Chronograph active Push-button B is also operative for the chronograph as soon as timing isstarted with push-button A At the end of timing and when the chronograph hands are reset to the zero positions the push-button fun ctions once again assume their initial status. The alarm cannot be adjusted when the chronograph is active.

4 4 Setting the date (quick mode) Data 50.B Data 50.B Pull out the crown to position II (the watch continues to run). Turn the crown until the correct date 0 appears. Push the crown back into position I. The date of the following day must be set in the calendar changing phase between 9 PM and midnight. Setting the date too quickly in quick mode can result in the incorrect date being displayed. Switching the date between 0 and (position II) restores the synchronisation.

5 5 Hour counter Push-button A Chronograph: Basic function Minute counter Push-button B (Start / Stop / Reset) Example: Start: Press push-button A. Stop: to stop the t iming, press pushbutton A once more and read the chronograph counters: 4h / 0 min / 8 sec Zero positioning: Press push-button B. (The chronograph hands will be reset to their zero positions) Note: The alarm cannot be used as long as the chronograph is in operation. Hour counter Minute counter Push-button A Push-button B Chronograph: Accumulated timing Example: 4 Start: (start timing) Stop: (e.g. 5 m in 5 sec following ) Restart: (timing is resumed) *Stop: (e.g. 0 min 5 sec following ) = 5 min 0 sec (Tile accumulated measured time is shown) 5 Reset: The three chronograph hands are returned to their zero positions. *Following 4, the accumulation of the timing can be continued by pressing push-button A (Restart / Stop, Restart / Stop,...)

6 6 Minute counter Push-button A Push-button B Push-button B * Chronograph:Intermediate or interval timing Example: 4 5 Start: (start timing) Display interval: e.g. 0 minutes 0 seconds (timing continues in the background) Making up the measured time: (the chronograph hands are quickly advanced to the ongoing measured time) Stop: (Final time is displayed) Reset: The chronograph hands are returned to their zero position *Following. further intervals or intermediates can be displayed by pressing push-button B (display interval I make up measured time,...) Adjusting the center stop-second Single step A x short Continuous A long Adjusting the next hand B Adjusting the minute counter hand and the hour counter hand (mechanical coupled) Single step A x short Continuous A long Returning the crown to position I Termination of the chronograph hands adjustment (can be carried out at any time The display changes from reference to alarm time.)

7 7 Date 50.D Setting the time and date Example: -Date / time on the watch: 7 / :5 AM -Present date / time: 04 / 0:9 PM Alarm time Date 50.D Second hand Pull out the crown to position II (watch continues to run). Turn the crown until yesterday s date appears 0 Pull out the crown to position Ill (the second hand stops. The display changes from alarm lime to reference time.) Reference time 4 Turn the crown until the correct date 04 appears. 5 *Continue to turn the crown until the current time 0:9 PM appears. Reference time 6 Push the crown back into position I (the display changes from reference to alarm time) Alarm time Resetting the time also requires the identical correction of the reference time. Please refer to setting the reference time. *Please observe the AM / PM clock rhythm.

8 8 Alarm time Push-buttion Setting the alarm time Activate the setting mode Press the push-button for at least seconds. As soon as the small minute hand jumps forward one minute, this mode is active. Setting Short pressing (less than second): the alarm time is moved forward by the minute Long pressing (longer than seconds): the alarm time is moved forward until the push-button is released. Note: The alarm cannot be used as long as the chronograph is in operation. If the push-button is not activated for 0 seconds, the setting mode of the alarm time deactivates itself. At the same time, two beeps are emitted to indicate that the a larm is switched on. Alarm time Push-buttion Switching the alarm on / off The alarm is switched on/off by briefly pressing the push-button: beeps alann switched on beep alann switched off The alarm can be set maximum hours before the desired alarm time. Once the set alarm time has been reached, a signal is emitted for 0 seconds. This sognal is repeated after two minutes. Following brief pressing of the push-button, the signal is immediately switched off.

9 9 Setting the reference time Reference time Reference time Small minute hand 4 *Pull out the crown to position Ill (second hand stops The display changes from alarm time to reference time.) Activating the setting mode Press the push-button for at least seconds. As soon as the small minute hand jumps forwards one minute, this mode is active. Short pressing (less than second): the reference time is moved forwards by the minute. Medium pressing: (- seconds): the reference time is moved forwards by the hour. Long pressing (longer than seconds): the reference time is moved forwards until the push-button is released. *Push the crown back into pos ition I (the display changes from refe rence time to alarm time). A signal indicates that the alarm is switched off. What is the reference time? The current time is displayed by means of the hour and minute hand. Alarm time * In order to set the time to the exact second, 0 must be pulled out when the second hand is in position «60» (Ill ). Once the hour and minute hands have been s et, 0 must be pushed back into position I at the exact second. Parallel to the current time, the reference time runs in the background the alarm time refers itself to this reference time Thus, resetting the time also requires the identical correction of the reference time. If the reference time is not synchronised with the current time, this results in the a larm signal being emitted at a different time to the s et a larm time.

10 0 Buran SA Chemin du Val, 900 Porrentruy Switzerland Tel Fax aviator@aviatorwatch.ch Copyright 04 AVIATOR Printed in Switzerland SWISS MADE WATCHES