Нотификации по Директива 98/34/ЕС (м. май 2007 г.)

Size: px

Start display at page:

Download "Нотификации по Директива 98/34/ЕС (м. май 2007 г.)"

Daisy Preston
5 years ago
Views:

1 Нотификации по Директива 98/34/ЕС (м. май 2007 г.) Национа лен орган по стандарт изация Номер на документа Заглавие SPAIN 1 AENOR PNE Aggregates - Designation FRANCE 2 AFNOR PR XP P Works operation nearby engineering networks : prevention and consequences of injuries 3 AFNOR PR NF A Weldable aluminium sheets for armouring - Part 2 : firing tests method 4 AFNOR PR XP T End of life tyres (ELT). Determination of the format of products from primary shredding. Method based on the automated measurement of the largest projected length 5 AFNOR PR XP T Plastics/Mulching films made from additived polyolefin with life time controlled in the environment for use in agriculture and horticulture - Part 1 : general, eco-toxicity and oxodegradability specifications 6 AFNOR PR NF P84705 Geosynthetic clay liners - Determination with a permeameter of swelling, flux and permeability characteristics of geosynthetics clay liners 7 AFNOR PR NF DTU 43.3 P2 Travaux de bâtiment - Mise en oeuvre des toitures en tôles d'acier nervurées avec revêtement d'étanchéité - Partie 2: Cahier des clauses spéciales 8 AFNOR PR NF DTU 43.4 P2 Travaux de bâtiment - Toitures en éléments porteurs en bois et panneaux dérivés du bois avec revêtement d'éanchéité - Partie 2 : Cahier des clauses spéciales 9 AFNOR PR NF ISO Information technology - Open - Document Format for Office Applications ROMANIA 10 ASRO SR 13465:2007 Requirements for personnel certification in project and programme management 11 ASRO SR 6156:2007 Building acoustics - Protection against noise in dwellings and public buildings - Admissible limits and sound insulation values 12 ASRO SR 10009:2007 Building acoustics - Urban acoustics - Permitted limits of noise level 13 ASRO SR 90:2007 Wheat flour - Analysis method 14 ASRO SR 91:2007 Bread and pastry products - Methods of analysis 15 ASRO SR 15313:2007 Mechanical connections of reinforcing bars 16 ASRO SR 8877:2007 Quick-break cationic bituminous emulsions for road works 17 ASRO SR :2007 Road works - Bituminous binder adhesiveness to mineral aggregates - Method of qualitative determination 18 ASRO SR :2007 Road works - Bituminous binder adhesiveness to natural aggregates - Adhesiveness determination methods for cationic bituminous emulsions 19 ASRO SR :2007 Road works - Adhesiveness of bitumen for roads to natural aggregates - Quantitative determination method 20 ASRO SR 13526:2008 Sanitation of communities - Urban wastes - Design specifications for selective pre-collection points 21 ASRO SR :2008 Road signalisation - Road traffic signs and signalisation tools - Classification, symbols and location

2 22 ASRO SR :2008 Road signalization - Road traffic signs and signalization tools - Technical requirements 23 ASRO SR :2008 Road signalization - Road traffic signs and signalization tools - Design and description BULGARIA 24 BDS prbds 5237 Keyboard layouts for Bulgarian language writing devices UNITED KINGDOM 25 BSI BS Fire detection and alarm systems for buildings - Specification for automatic release mechanisms for certain fire protection equipment 26 BSI BS Code of practice for the operation of fire protection measures - Part 2: Mechanical actuation of gaseous total flooding and local application extinguishing systems 27 BSI BS Guide on the provision of emergency lighting to compensate for hazards identified by the Fire Safety Order risk assessments 28 BSI BS M:1990 A1 Measurement of liquid flow in open channels - Stream flow measurement. Guide to the methods of measuring high discharges in rivers - Amendment 1 29 BSI BS :1995 A1 Measurement of liquid flow in open channels - Guide to measurement of flow in tidal channels - Amendment 1 30 BSI BS 8498 Screw thread standards and screw gauge standards - General introduction and guidance 31 BSI BS 4A 100:2003 A1 Specification for general requirements for bolts and free running nuts of tensile strength not exceeding 1249 MPa - Amendment 1 32 BSI BS :2006 A1 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents. Part 2. Negative pressure, air purifying devices with full face mask. Amendment 1 33 BSI BS Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents. Part 3.1. Selfcontained open-circuit compressed air breathing apparatus incorporating a hood for escape. Specification 34 BSI BS 6SP 4:2000 A2 Pins headed, plain shank, drilled, steel alloy and corrosion-resisting steel with a strength class 880 / 1080 MPa - Amendment 2 35 BSI BS 6622:1999 CORR 1 Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kv to 19/33 kv. Requirements and test methods. Corrigendum 1 36 BSI BS 4662:2006 A1 Boxes for flush mounting of electrical accessories. Requirements and test methods and dimensions. Amendment 1 CZECH REPUBLIC 37 CNI 73/2291/06 Design, calculation and assessment of building structures - General rules and rules for ground structures 38 CNI 46/0802/07 Pulses - Part 2: Peas edible GERMANY 39 DIN Fire behaviour of building materials and components; fire barriers, verification of automatic closure (continuous performance test) 40 DIN Fire fighting - Positive pressure foam systems 41 DIN Fire fighting - Compressed air foam systems 42 DIN Fire brigade vehicles - Colouring 43 DIN Smoke control doors; type testing for durability and leakage 44 DIN Tabular layouts of properties - Part 170: Files and rasps with geometrically determined cutting edges 45 DIN Hexagon washer head tapping screws

3 46 DIN Cross recessed pan head tapping screws with collar 47 DIN Hexalobular socket raised head tapping screws with collar 48 DIN Tommy bars for socket wrenches 49 DIN Properties and their scopes for product data exchange - Part 7: Rules for the formation of the reference hierarchy 50 DIN Dispense systems for draught beverages - Part 7: Hygienic requirements for the installation of beverage dispensing systems; Amendment A1 51 DIN Dentistry - Suction elements for suction devices 52 DIN Body dimensions of people - Part 1: Terms and definitions, measuring procedures 53 DIN Medical instruments - Sequestrum forceps type van Buren 54 DIN Medical instruments - Surgical scissors type Olivecrona 55 DIN Medical instruments - Plaster scissors type Stille 56 DIN Medical instruments - Skull forceps type Dahlgreen 57 DIN Medical instruments - Rip shears type Sauerbruch 58 DIN Medical instruments - Ear gouging forceps type Citelli 59 DIN Medical instruments - Ethmoid rangeur forceps type Bruenings 60 DIN Medical instruments - Ethmoid rongeur forceps type Hajek-Claus 61 DIN Medical instruments - Ethmoid rongeur forceps type Craig 62 DIN Medical instruments - Haemostatic forceps type Dieffenbach 63 DIN Medical instruments - Haemostatic forceps type Guyon 64 DIN Medical instruments - Haemostatic forceps type Wertheim-Cullen 65 DIN Medical instruments - Haemostatic forceps type Semb 66 DIN Medical instruments - Haemostatic forceps type Price-Thomas 67 DIN Medical instruments - Retractor type Ollier 68 DIN Medical instruments - Raspatory 69 DIN Medical instruments - Raspatory type Sedillot 70 DIN Medical instruments - Bone lever type Lange-Hohmann 71 DIN Medical instruments - Elevator type Langenbeck, with grid cap 72 DIN Medical instruments - Lachrymal sac retractor type Rollet 73 DIN Medical instruments - Nerve hook type Cushing 74 DIN Medical instruments - Dura hook type Toennis 75 DIN Medical instruments - Iris hook type Graefe 76 DIN Medical instruments - Strabismus hook type Graefe 77 DIN Refrigerators for conserved blood; Concepts, requirements, testing 78 DIN Surgical dressings - Dressing packs 79 DIN First aid material - First aid box C 80 DIN First aid material - First aid box E DIN Magnetic resonance equipment for human use - Part 2: Instructions for labeling items within the controlled area 83 DIN DIN Double lug head fittings with metric thread - Part 1: For swivels and turnbuckles, non-alloy quality steel 84 DIN Pipelines on ships - Pressure ratings, pressure tests 85 DIN Aerospace - Alternative materials for fasteners; solid rivets, Corrigenda to DIN : DIN Packaging test - Test methods for plastic sacks - Determination of the film thickness

4 87 DIN DIN Surface active agents - Analysis of technical alkane sulphonates - Determination of alkane monosulphonates content 88 DIN Testing of aggregates - Impact test - Part 2: Impact test on ballast 89 DIN Production in optical engineering - Test of polishing agents for optical engineering - Part 4: Qualification of polishing agents 90 DIN Rules for text presentation 91 DIN Standardization - Part 4: Working procedure 92 DIN Equipment for outdoor and indoor sports facilities - Referee's stands - Part 1: Volleyball; dimensions, requirements, testing 93 DIN Gymnastic equipment - Spring board for school gymnastics 94 DIN Testing of paper, boxboard and paper board; Determination of glyoxal content 95 DIN Sheets for loose leaf binders; dimensions for standard punching for paper sizes A4 and A5 ESTONIA 96 EVS EVS 613 Traffic signs - Application 97 EVS EVS 614 Traffic markings - Application 98 EVS EVS 615 Road traffic signals - Application 99 EVS EVS 891 Measurement and evaluation of electrical lighting in work places PORTUGAL 100 IPQ prnp 1796: 2007 Occupational health and safety. Occupational exposure limits to chemical agents 101 IPQ prnp :2007 International Electrotechnical Vocabulary 102 IPQ prnp 4463: 2007 Guidance on statistical techniques for ISO 9001: IPQ prnp 4464: 2007 Cork/rubber materials for tightness joints used in gas appliances, valves, devices and gas installation - Requirements and test methods LITHUANIA 104 LST LST EN 1304:2006/1K:2007 Clay roofing tiles and fittings Product definitions and specifications 105 LST pr LST 1204:2007 Whey - General quality requirements 106 LST Pr LST 0-1:2007 Standardization - Part 1: General provisions 107 LST Pr LST 0-2-1:2007 Standardization - Part 2: Common rules for standardization work - Chapter 1: National level 108 LST Pr LST 0-4:2007 Standardisation - Part 4: Application of standards and other publications by international and regional standards and standardizing organizations and foreign countries national standards bodies 109 LST Pr LST 0-6:2007 Standardization - Part 6: Taking over standards and other deliverables of European organizations for standardization at a national level 110 LST pr LST 1210:2007 Buttermilk powder - General quality requirements 111 LST LST 1624:2001/pr1K:2007 Shoes sizes Application of Mondopoint system LATVIA 112 LVS prlvs 447 Standard Test Method for Volatile Content of Coatings MALTA 113 MSA DMS EN 589/NA Automotive fuels - LPG - Requirements and test methods National Annex to MSA EN 589: MSA DMS EN 14214/NA Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods National Annex to MSA EN 14214:2003

5 AUSTRIA 115 ON ÖNORM A Bbl 2 Facility operation - Data structures - Part 2: Maintenance principles for building and facility operation data - Supplement 2: Sample data sheets for information on installations and operation 116 ON ÖNORM B Eurocode 1: Actions on structures - Part 4: Silos and tanks - National specifications concerning ÖNORM EN and national supplements 117 ON ÖNORM B Concrete - Part 1: Specification, production, use and verification of conformity (Rules for the implementation of ÖNORM EN for normal and heavy concrete) 118 ON ONR Glass in building - Services in the field of glass construction - Requirements for the qualification of glass application engineers 119 ON ÖNORM B 2500 Waste water management - Formation and disposal of waste water - Terms, definitions and units 120 ON ÖNORM ISO Alpine touring ski-bindings - Requirements and test methods (ISO 13992:2006) 121 ON ÖNORM ISO Bevel gears - ISO system of accuracy (ISO 17485:2006) 122 ON ÖNORM DIN Equipment for commercial kitchens - Food distribution equipment - Part 1: Dimensions, requirements, testing 123 ON ÖNORM DIN Equipment for commercial kitchens - Food distribution equipment - Part 2: Heated service counters 124 ON ÖNORM DIN Equipment for commercial kitchens - Food distribution equipment - Part 3: Service tables (neutral counters) 125 ON ÖNORM DIN Equipment for commercial kitchens - Food distribution equipment - Part 4: Top shelves heated or not heated 126 ON ÖNORM DIN Equipment for commercial kitchens - Food distribution equipment - Part 5: Tray slides 127 ON ÖNORM DIN Equipment for commercial kitchens - Food distribution equipment - Part 6: Dispensers 128 ON ÖNORM DIN Equipment for commercial kitchens - Food distribution equipment - Part 7: Cold storage 129 ON ÖNORM DIN Equipment for commercial kitchens - Food distribution equipment - Part 8: Top shelves refrigerated 130 ON ÖNORM DIN Equipment for commercial kitchens - Food distribution equipment - Part 9: Equipment-insides in basic and hygiene version 131 ON ÖNORM S Medical X-ray equipment - Rules for testing the radiation protection - Part 1: Diagnostic X-ray equipment 132 ON ÖNORM ISO 4649 Rubber, vulcanized or thermoplatic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2002) 133 ON ÖNORM ISO Rubber - General procedures for preparing and conditioning test pieces for physical test methods (ISO 23529:2004) 134 ON ÖNORM ISO Technical drawings - General principles of presentation - Part 24: Lines on mechanical engineering drawings 135 ON ONR Quality management for supply with medical devices for rehabilitation - Part 2: Rehabilitation engineer - Requirements and preconditions 136 ON ONR Quality management for supply with medical devices for rehabilitation - Part 3: Medical devices for rehabilitation - General minimum requirements for their usage in supply 137 ON ONR Quality management for supply with medical devices for rehabilitation - Part 4: Wheelchairs - Selection and adaptation of manually propelled wheelchairs 138 ON ÖNORM ISO Small craft - Permanently installed fuel systems (ISO/DIS 10088:2006) 139 ON ÖNORM V 5121 Wheel slide protection control devices for vehicles classes M1, N1, O1, O2 - Requirements, testing, marking of conformity 140 ON ÖNORM A 5522 Polariscopic testing of glass containers POLAND 141 PKN prpn-g Mine transportation system - Self unloading cars - Requirements and tests

6 142 PKN prpn-g Mine transportation system - Small and medium cars for the transportation of long materials - Requirements and tests 143 PKN prpn-c Petroleum products - Determination of distillation characteristics at reduced pressure 144 PKN prpn-c Petroleum products - Automotive fuel - Biodiesel B30 - Requirements and test method 145 PKN prpn-c Petroleum products - Automotive fuel - Biodiesel B20 - Requirements and test method 146 PKN prpn-c Petroleum products - Determination of gross caloric value of liquid fuels by the bomb calorimeter and calculation of net caloric value - Part 1: Principles, apparatus, methods 147 PKN prpn-c Petroleum products - Determination of gross caloric value of liquid fuels by the bomb calorimeter and calculation of net caloric value - Part 2: Method using isothermal water jacket 148 PKN prpn-c Petroleum products - Determination of gross caloric value liquid fuels by the bomb calorimeters and calculation of net caloric value - Part 3: Method using isothermal adiabaticr jacket FINLAND 149 SFS SFS 5059 Instrumentation - Placing of Process instruments SWEDEN 150 SIS SS Paints and varnishes Repainting of coil coated steel sheets - General introduction 151 SIS SS Paints and varnishes Repainting of coil coated steel sheets - Purchaser documentation 152 SIS SS Paints and varnishes - Repainting of coil coated steel sheets - Surface investigation and paint specification 153 SIS SS Paints and varnishes - Repainting of coil coated steel sheets - Surface preparation 154 SIS SS Paints and varnishes - Repainting of coil coated steel sheets - Painting, masking and environmental protection 155 SIS SS Paints and varnishes - Repainting of coil coated steel sheets - Paint systems and choice of paint systems 156 SIS SS Paints and varnishes - Repainting of coil coated steel sheets - Test methods 157 SIS SS Construction drawings Representations Beams and columns of steel 158 SIS SS Construction drawings Representation of fasteners 159 SIS SS Construction documents - Revisions 160 SIS SS Construction documents - Indication of status SLOVENIA 161 SIST SIST 1035:2007 Bitumen and bituminous binders - Polymer modified bitumen for road construction -Requirements - Rules for implementation of SIST EN SIST SIST 1026:2006 Concrete - Part 1: Specification, performance, production and conformity Rules for the implementation of SIST EN SWITZERLAND 163 SNV SIA 269 Basis for the preservation of structural designs SLOVAKIA 164 SUTN STN Hydrology - Hydrological data of surface water - Basic regulations 165 SUTN STN Hydrology - Hydrological data of surface water - Mean water bearing quantification - Part 1: Characteristics of daily water stages and discharges

7 166 SUTN STN Hydrology - Hydrological data of surface water - Mean water bearing quantification - Part 2: Characteristics of monthly water stages and discharges 167 SUTN STN Hydrology - Hydrological data of surface water - Mean water bearing quantification - Part 3: Characteristics of annual water stages and discharges

Нотификации по Директива 98/34/ЕС (м. февруари 2007 г.)

Нотификации по Директива 98/34/ЕС (м. февруари 2007 г.) Национал ен орган по стандарти зация Номер на документа SPAIN Заглавие 1 AENOR PNE 54130-1 Recommendations for the elaboration of a visual corporative