Certificate of Compliance
|
|
- Laurence Woods
- 5 years ago
- Views:
Transcription
1 European Conformity Ente Certificazione Macchine Srl شھادة 증명서 Certificate Cертификат Certificat Certificate of Compliance No. 2Z SBMTN21 Certificate s Holder: Certification ECM Mark: Product: Model(s): Verification to: Shanghai Baobang Medical Equipment Co., Ltd. Building 15, No.889 Guinan Road, Shihudang Town, Songjiang District, Shanghai Type Approved Oil-free air compressor MP , MP , MP392524, BKY-01, KY-01, BKY-06, KY-08, BOYT03, BOYT05, BOYT1501 Standard: EN ISO 12100:2010, EN :2006+A1:2009+AC:2010, EN :2005/AC:2005 related to CE Directive(s): 2006/42/EC (Machinery) 2014/35/EU (Low Voltage) 2014/30/EU (Electromagnetic Compatibility) Remark: The product(s) has been verified on a voluntary basis. The product(s) satisfies the requirements of the Certification Mark of ECM, in reference to the above listed Standard(s). The above Compliance Mark can be affixed on the product(s) accordingly to the ECM regulation about its release and its use. The regulation can be found at This Certificate of Compliance can be checked for validity at This verification doesn t imply assessment of the production of the product(s). Additional information, clarification about the Marking: We attest that a TCF for the Marking process is in place. Whereas the Manufacturer is Responsible to start the Marking Certification Procedure and to perform all the necessary activities, as required by the Directive before placing the Mark on the product(s). Date of issue 27 November 2017 Expiry date 26 November 2022 Chief Manager Deputy Manager Marco Morina Amanda Payne Via Ca Bella, 243 Loc. Castello di Serravalle Valsamoggia (BO) - ITALY info@entecerma.it
2 European Conformity Ente Certificazione Macchine Srl شھادة 증명서 Certificate Cертификат Certificat Certificate of Compliance No. 2Z SBMQD95 Certificate s Holder: Certification ECM Mark: Product: Model(s): Verification to: Shanghai Baobang Medical Equipment Co., Ltd. Building 15, No.889 Guinan Road, Shihudang Town, Songjiang District, Shanghai Type Approved Inflatable bag ST701, ST601, ST602, ST702, ST702-3, ST801, ST901, ST901C, ST901-3(Salus36), ST902, ST1001, ST1101, ST1700(Parvis), ST2200 Standard: EN 13537:2002 related to CE Directive(s): 2001/95/EC (General Product Safety) Remark: The product(s) has been verified on a voluntary basis. The product(s) satisfies the requirements of the Certification Mark of ECM, in reference to the above listed Standard(s). The above Compliance Mark can be affixed on the product(s) accordingly to the ECM regulation about its release and its use. The regulation can be found at This Certificate of Compliance can be checked for validity at This verification doesn t imply assessment of the production of the product(s). Additional information, clarification about the Marking: We attest that a TCF for the Marking process is in place. Whereas the Manufacturer is Responsible to start the Marking Certification Procedure and to perform all the necessary activities, as required by the Directive before placing the Mark on the product(s). Date of issue 20 December 2017 Expiry date 19 December 2022 Chief Manager Deputy Manager Marco Morina Amanda Payne Via Ca Bella, 243 Loc. Castello di Serravalle Valsamoggia (BO) - ITALY info@entecerma.it
3
4
5
6 European Conformity Ente Certificazione Macchine Srl شھادة 증명서 Certificate Cертификат Certificat Certificate of Compliance No. 2Z JHBU040 Certificate s Holder: Manufacturer: Certification ECM Mark: Product: Model(s): Verification to: Jason & Henri Biotech Enterprise Co., Ltd. 1F., No.1, Ln.26, Xingning St., Zhongli Dist., Taoyuan City 32059, Taiwan(R.O.C.) Shanghai Baobang Medical Equipment Co., Ltd. Building 15, No.889 Guinan Road, Shihudang Town, Songjiang District, Shanghai Type Approved Animal HyperOxy Chamber JYT-200, JYT-100, JYT-300, JYT-400, JYT-500, HP400, HP600, JYT-600, JYT-700, JYT-800, JYT-900, JYT-1000 Standard: EN :2012+A11:2014, EN :2006+A1:2009+A2:2011, EN :2015, EN :2014, EN :2013 related to CE Directive(s): 2014/35/EU (Low Voltage) 2014/30/EU (Electromagnetic Compatibility) Remark: The product(s) has been verified on a voluntary basis. The product(s) satisfies the requirements of the Certification Mark of ECM, in reference to the above listed Standard(s). The above Compliance Mark can be affixed on the product(s) accordingly to the ECM regulation about its release and its use. The regulation can be found at This Certificate of Compliance can be checked for validity at This verification doesn t imply assessment of the production of the product(s). Additional information, clarification about the Marking: We attest that a TCF for the Marking process is in place. Whereas the Manufacturer is Responsible to start the Marking Certification Procedure and to perform all the necessary activities, as required by the Directive before placing the Mark on the product(s). Date of issue 09 April 2018 Expiry date 08 April 2023 Chief Manager Deputy Manager Marco Morina Amanda Payne Via Ca Bella, 243 Loc. Castello di Serravalle Valsamoggia (BO) - ITALY info@entecerma.it
7
The Role of Market Surveillance
Certification and Marking for Europe The Role of Market Surveillance Jan Deconinck, M.Sc. PROSAFE Chairman 1. Marks 1. Marks 1. Marks - It is prohibited to affix other markings or marks which might be
More informationPressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"
D. EVALUATION ASSESSMENT PROCEDURES Guideline D-01 Guideline related to: Annex III, module G Is design approval by a notified body required under module G? Module G does not explicitly require formal design
More informationCouncil Directive 93/68/EEC of 22 July 1993 amending Directives
Council Directive 93/68/EEC of 22 July 1993 amending Directives 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility),
More informationEC TYPE EXAMINATION (MODULE B) CERTIFICATE
EC TYPE EXAMINATION (MODULE B) CERTIFICATE This is to certify that: LLOYD'S REGISTER VERIFICATION LIMITED (LRV), specified as a notified body under the terms of The Merchant Shipping (Marine Equipment)
More informationEQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES (ATEX)
English European Commission > Enterprise & Industry > Industry Sectors > Equipment intended for use in Potentially Explosive Atmospheres (ATEX) > How to apply the Directive > Contact Search Considerations
More informationThe Machinery Directive 2006/42/EC
The Machinery Directive 2006/42/EC Aims of the Machinery Directive To ensure the free movement of machinery on the EU market whether manufactured in the EU or imported To ensure a high level of protection
More information1. Terms defined in the Construction Products Regulation (CPR)
CEN/TC 351 Glossary of relevant terms related to the CPR The following list of terms provides definitions of terms related to the CPR (EU/305/2011) which are relevant for the work of CEN/TC 351 Construction
More informationDNV BUSINESS ASSURANCE
DNV BUSINESS ASSURANCE FULL QUALITY ASSURANCE CERTIFICATE EC Certificate No. 3949-2013-CE-RGC-ACCREDIA This certificate consists of 5 pages This is to certify that the quality management system of Lung
More informationEuropean Technical Approval ETA-08/0035 This ETA replaces ETA-08/0035 with validity from till
SINTEF Building and Infrastructure P.O.Box 124 Blindern N-0314 Oslo Tel. 47 22 96 55 55 Fax 47 22 69 54 38 Authorised and notified according to Article 10 of the Council Directive 89/106/EEC of 21 December
More informationETICS and the EU Internal Market The European framework. G. Katsarakis European Commission, DG GROWTH Unit C-1: Clean technologies and products
ETICS and the EU Internal Market The European framework G. Katsarakis European Commission, DG GROWTH Unit C-1: Clean technologies and products 1 THE EU CONSTRUCTION SECTOR The importance of the construction
More informationCertificato numero: 300 RIVA TECNOIMPIANTI S.R.L. UNI EN ISO 9001 : 2015 ISO 9001 : 2015
IIS - Founding Member of IIS - Founding Member of Si certifica che la Società We hereby certify that the Company Unità operativa / Branch Certificato numero: 300 Certificate number applica un Sistema di
More informationC e r t i f i c a t e Of Conformity No.: 0560-CPD /AA/05
C e r t i f i c a t e Of Conformity No.: 0560-CPD-10219002/AA/05 In compliance with the procedure specified in RD_090, Telefication declares as designated Notified Body for the European Construction Products
More informationThe Danish Energy Authority to carry out inspections in June and July 2012
The Danish Energy Authority to carry out inspections in June and July 2012 We check the CE marking of the insulation products of expanded polystyrene (EPS) you sell or use. And we check if you have declared
More informationLawnmowers, pedestrian controlled (combustion engine powered)
Compliance Guide Rev.1, 09/2016 Lawnmowers, pedestrian controlled (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 206
More informationSUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE)
SUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE) SCS/SF/053-8 Issue 1 Sira Certification Service INTRODUCTION One of the conditions placed on all holders of Sira
More informationHow to Self-Certify For the CE Mark A Quick Start Guide by Dennis King - EMI Test Lab
How to Self-Certify For the CE Mark A Quick Start Guide by Dennis King - EMI Test Lab For questions and details contact Dennis at dennis@emitestlab.com Introduction The CE mark (an acronym for the French
More informationC e r t i f i c a t e
C e r t i f i c a t e of EC Type-examination (Module B) Certificate Nº: 09212007/AA/01 Product Category: A.1/5.13 With respect to Marine Equipment Directive 96/98/EC and the amending Directive 2008/67/EC,
More informationRADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 RADAR REFLECTOR JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation with
More informationTaiwantrade Supplier Business Information Verification Report
Taiwantrade Supplier Business Information Verification Report Company Address: City / Country: Presented to SUN MINES ELECTRICS CO., LTD. 三敏電機股份有限公司 7F,No.153,Sec. 3,Beishen Rd., Shenkeng Dist., New Taipei
More informationEU Declaration of Conformity
22 May 2017 EU Declaration of Conformity Model Number: ETT10I1 Series Equipment Category: Information Technology and Telecommunications Equipment Equipment Class: Commercial and Light Industrial Product
More informationQuality Profile. Centurion. Scientific Limited
Quality Profile Centurion Scientific Limited Preface Within the Following pages. We show what makes the Quality of our Centrifuges and why we are so successful. Not only do we use the best components encased
More informationEC Certificate - Full Quality Assurance System Directive 93/42/EEC on Medical Devices, Annex II excluding Section 4
Directive 93/42/EEC on Medical Devices, Annex II excluding Section 4 No. CE 00999 In respect of: The design and manufacture of diagnostic X-Ray tubes, CT tubes and mammography tubes, and the design and
More informationUSCG-EU MRA EC TYPE EXAMINATION (MODULE B) CERTIFICATE
LRV02..206.09 USCG-EU MRA EC TYPE EXAMINATION (MODULE B) CERTIFICATE This is to certify that: LLOYD'S REGISTER VERIFICATION LIMITED (LRV), designated as a notified body under the terms of the Merchant
More informationRole of CE Marking in the Placing on the Market of Electronic Components
Explanatory Leaflet Role of CE Marking in the Placing on the Market of Electronic Components New Legislative Framework Component Industries RoHs Directive CE Marking Low Voltage Directive Electronic Components
More informationChain saws (electric mains powered and battery powered)
Compliance Guide Edition 09/2016 Chain saws (electric mains powered and battery powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 206 68
More informationThe CPD - The View of the European Commission
The CPD - The View of the European Commission Dr. Helen Sutcliffe DG Enterprise : Construction Unit Reminder State of Play CPD Fire issues Future role 2 1 What is the CPD? The Construction Products Directive
More informationCERTIFICATE. Conformity of the Factory Production Control CPR TÜVRh
CERTIFICATE Conformity of the Factory Production Control 0035-CPR-1090-1.00794.TÜVRh.2017.003 In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the
More informationCEN standardization work on refrigerating systems, especially standard EN 378
CEN standardization work on refrigerating systems, especially standard EN 378 Carsten Hoch Head of Refrigeration TÜV SÜD Industrie Service GmbH Ridlerstrasse 65, 80339 Munich carsten.hoch@tuev-sued.de
More informationDEHUMIDIFIERS FOR SWIMMING POOL. International. ET INTERNATIONAL S.r.l. Via Circonvallazione Est, 32/R Castelfranco Veneto - TREVISO - ITALY
International DEHUMIDIFIERS FOR SWIMMING POOL ET INTERNATIONAL S.r.l. Via Circonvallazione Est, 32/R - 31033 Castelfranco Veneto - TREVISO - ITALY TELEFONO: +39 0423 491100 E-MAIL: info@etinternationalsrl.com
More informationSD119 Range of Conventional Smoke and Smoke/Heat Detectors (refer to attached appendix for details and conditions)
In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation), this certificate applies to the construction product(s).
More informationBrush cutters Grass Trimmers (combustion engine powered)
Compliance Guide Rev.1, 09/2016 Brush cutters Grass Trimmers (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 206 68
More informationGarden blowers, vacuums and blower/vacuums (electric mains powered)
Compliance Guide Rev.01, Edition 04/2018 Garden blowers, vacuums and blower/vacuums (electric mains powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org
More informationASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS
Revision index Effective date C 15/02/2015 ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS 4, avenue du Recteur-Poincaré, 75782 Paris Cedex 16 Tel. 33 (0)1.64.68.84.97 Fax. 33 (0)1.64.68.83.45
More informationLawnmowers (pedestrian controlled electric mains-powered)
Compliance Guide Rev.2, Edition 04/2018 Lawnmowers (pedestrian controlled electric mains-powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32
More informationMARKING EC Directive 97/23 PED (Pressure Equipment Directive)
MARKING EC Directive 97/23 PED (Pressure Equipment Directive) Field of application The Directive applies to the design, manufacturing and conformity assessment of the pressure equipment and of their groups
More informationProtection, safety, reliability. And more.
Blowing in Faster. Protection, safety, reliability. And more. ULTRA -LOW F REEZER Ultrafreezers upright and chest S Ultra-low freezers upright and chest R 7 DIFFERENT SIZE MODELS WITH WIDE CHOICE OF INTERNAL
More informationCOMMISSION DELEGATED REGULATION (EU) /... of XXX
Ref. Ares(2017)4156968-24/08/2017 EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION DELEGATED REGULATION (EU) /... of XXX establishing common safety methods on safety management system requirements
More informationLawnmowers (pedestrian controlled, battery powered)
Compliance Guide Rev.01, Edition 04/2018 Lawnmowers (pedestrian controlled, battery powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 206
More informationCE MARKING PROCESS & NOTIFIED BODIES
CE MARKING PROCESS & NOTIFIED BODIES Ellis Garai Ramin Miri Spring 2011 GLOBAL BIODESIGN STANFORD UNIVERSITY Machinery 9% Others 49% Construction 11% Notified Bodies Industrial and Medical Devices 8% NAWI
More informationISO Anti-bribery Management Systems and Vehicle Inspections in the Slovak Republic
CITA WG3 Standardized Inspection Outcomes 4 th April 2018, TESTEK, a.s., Bratislava ISO 37000 Anti-bribery Management Systems and Vehicle Inspections in the Slovak Republic Ing. Marián Rybianský (TESTEK)
More informationDOMESTIC DEHUMIDIFIERS FLIPPERDRY
DOMESTIC DEHUMIDIFIERS FLIPPERDRY 300400 DOMESTIC DEHUMIDIFIERS FLIPPERDRY SERIES The Fral domestic dehumidifiers of the FLIPPERDRY series are highquality appliances, characterized by an elegant design
More informationLawn trimmers and lawn edge trimmers (hand held electric mains powered)
Compliance Guide Edition 09/2016 Lawn trimmers and lawn edge trimmers (hand held electric mains powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org
More informationAchieve Success with European Medical Device Commercialization. By Russ King
Achieve Success with European Medical Device Commercialization By Russ King Achieve Success with European Medical Device Commercialization Given the complexity of the FDA s regulatory pathway, many medical
More informationGuideline Construction Products Regulation (EU) 305/20122
Guideline Construction Products Regulation (EU) 305/20122 Guideline: CPR 1 Table of contents Common Abbreviations... 4 Executive Summary... 5 Purpose of this guidance document... 5 Summary Requirements
More informationMARINE GYRO COMPASS STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 MARINE GYRO COMPASS JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation
More informationei DG UV Test EC-Type Examination (Module B) Certificate
European notified body Identification number 0736 ei DG UV Test Prüf- und Zertifizierungsstelle BG Verkehr Dienststelle Schiffssicherheit EC-Type Examination (Module B) Certificate Certificate No. 100.185
More informationAS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment
AS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment AS/NZS 3820:2009 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee
More informationRULEBOOK ON ELECTROMAGNETIC COMPATIBILITY
RULEBOOK ON ELECTROMAGNETIC COMPATIBILITY ("Official Gazette of RS, issue No. 13/2010) I INTRODUCTION Scope Article 1 This Rulebook stipulates the essential requirements that shall be met with regard to
More informationImplementing the Construction Products Regulation (EU) 305/2011
Implementing the Construction Products Regulation (EU) 305/2011 G. Katsarakis European Commission, DG Enterprise and Industry Unit B-1: Sustainable Industrial Policy and Construction THE EU CONSTRUCTION
More informationStatistics on RAPEX notifications (November 2017)
EUROPEAN COMMISSION JUSTICE AND CONSUMERS DIRECTORATE-GENERAL Consumer Affairs Product safety and Rapid Alert System Brussels, 4 December 2017 Statistics on RAPEX notifications (November 2017) In accordance
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 8.3.2018 C(2018) 1392 final COMMISSION DELEGATED REGULATION (EU) /... of 8.3.2018 establishing common safety methods on safety management system requirements pursuant to Directive
More informationCE marking & your legal obligations
CE marking & your legal obligations This presentation is intended to provide a practical approach guide to what you need to know about the CE marking requirements for electrical and electronic equipment
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE CERTIFICATION SERVICES INC. 1 Kunshan Laboratory No. 10 Wei ye Road Innovation Park Eco & Tec. Development Zone Kunshan City, Jiangsu, People s Republic
More informationFRAL SRL via dell industria e dell artigianato, 22/C Carmignano di Brenta - PADOVA - ITALY
FRAL SRL via dell industria e dell artigianato, 22/C - 35010 Carmignano di Brenta - PADOVA - ITALY TELPHONE: +39 049 9455839 FAX: +39 049 5991129 E-MAIL: info@fral.it WEB: www.fral.it DEHUMIDIFIERS FD
More informationRobotic Mowers (battery powered and charging station connected to electric mains or low voltage supply)
Compliance Guide Edition 05/2018 Robotic Mowers (battery powered and charging station connected to electric mains or low voltage supply) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels,
More informationThe New EMC Directive 2004/108/EC
The New EMC Directive 2004/108/EC In the process of this review I have tried to spell out in words what is often referred to as a section number while also keeping to location information as used in the
More informationThe Impact of Marking Requirements. on Design and Performance of Power Converters and Electrical Drives
European The Impact of Marking Requirements on Design and Performance of Power Converters and Electrical Drives Harmonization of Standards The Key to the European Market C onfused E urope EN 600204 BS...
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 054/02)
12.2.2016 EN Official Journal of the European Union C 54/9 Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council
More informationThe New EMC Directive 2004/108/EC
The New EMC Directive 2004/108/EC In the process of the review I have tried to spell out in words what is often referred to as a section number. This helps reduce the need to flip pages as one reads this.
More informationGas Appliances Directive - Advisory Committee. Comité Consultatif de la Directive Appareils a Gaz
Document GAD-AC N 519 E v2 Date 2016-11 23 Gas Appliances Directive - Advisory Committee Comité Consultatif de la Directive Appareils a Gaz FOR INFORMATION CONCERNING: Questions and Answers approved by
More informationDAIDEN PLASTICS(SHANGHAI) CO.,LTD
DAIDEN PLASTICS(SHANGHAI) CO.,LTD Address: 1328 Jiujing Road, Songjiang District, Shanghai, 201615. China Tel: +86-21-67696109, 67696978 Fax: +86-21-67696207 DAIDEN PLASTICS(SHANGHAI) CO.,LTD BRIEF INTRODUCTION
More informationCE marking & your legal obligations
CE marking & your legal obligations This presentation is intended to provide a practical approach guide to what you need to know about the CE marking requirements for electrical and electronic equipment
More informationCE MARKING OF WOOD-BASED PANELS
28 Market Place Grantham Lincolnshire NG31 6LR Tel: 00 44 (0) 1476 563707 Fax: 0044 (0) 1476 579314 e-mail: wpif.panelboards@virgin.net WOOD PANEL INDUSTRIES FEDERATION CE MARKING OF WOOD-BASED PANELS
More informationC e r t i f i c a t e
C e r t i f i c a t e of Continued Compliance Certificate No.: 13229027/AA/00 In compliance with the procedure specified in RD_070, Telefication declares that the stated alarm equipment complies with the
More informationMARKET ACCESS SOLUTIONS FOR INDUSTRIAL MACHINERY
MARKET ACCESS SOLUTIONS FOR INDUSTRIAL MACHINERY International Safety Certification Services MARKET ACCESS SOLUTIONS FOR INDUSTRIAL MACHINERY International Safety Certification Services UL is a premier
More informationCooper Lighting & Safety Limited Wheatley Hall Road, Doncaster, DN2 4NB, United Kingdom
In compliance with Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the construction
More informationERTIFICATE. No. P This Nemko Certificate replaces the Certificate issued 27 March 2003 due to an error in the Factory listing.
I:.~:D C ERTIFICATE Page 1 of 1 No. P031 00471 and also certificate and with, and for acceptance This Nemko Certificate replaces the Certificate issued 27 March 2003 due to an error in the Factory listing.
More informationEuropacable FAQ on CPR Status: 26/01/17
Europacable FAQ on CPR Status: 26/01/17 DISCLAIMER This FAQ document reflects the best knowledge of industry experts across Europe and the state of the art at the time of writing (July 2016). It represents
More informationTransition from GAD to the GAR July,
Transition from GAD to the GAR July, 6 2017 1 P a g e Introduction Dear Sit Customers, As of 21 April 2018, the Gas Appliances Directive 2009/142/EC (GAD) will be replaced by the new Gas Appliances Regulation
More informationDECLARATION OF COMPLIANCE PERFORMANCE AND CE MARK
DECLARATION OF COMPLIANCE PERFORMANCE AND CE MARK Declaration only valid with the purchase invoice for the said product, which indicates the quantity of l./kg acquired, data that will determine approx.
More informationISO 9001:2015 TRANSITIONS
Copyright 2015 MAS Solutions LLC. All Rights Reserved. 1 ISO 9001:2015 TRANSITIONS Transition Strategies Copyright 2015 MAS Solutions LLC. All Rights Reserved. 2 TRANSITION STRATEGIES Andy Warhol, Butterfly,
More informationEC-Declaration of Conformity
Document number: 1/5 Manufacturer or representative: OSRAM AG Address: Hellabrunner Straße 1 81543 München Germany Brand name or trade mark: Product type: Product designation: LED module LS_LRXXX-Linear
More informationITC PROFESSIONAL SERVICES
ITC PROFESSIONAL SERVICES high support of quality and safety November 2016 INSTITUT PRO TESTOVÁNÍ A CERTIFIKACI, a. s. Institute for Testing and Certification, Inc. (hereinafter only ITC) is a private
More informationHTA ACCREDITATIONS. NADCAP (Heat Treating) 2 AS 9100C 5-6 ISO NADCAP (Heat Treating) 3 AS 9100C 5-6 ISO NADCAP (Heat Treating) 4
HTA ACCREDITATIONS page HTA AEROSPACE & DEFENSE / HTA BRISBANE NADCAP (Heat Treating) 2 AS 9100C 5-6 ISO 9001 7-8 HTA AEROSPACE & DEFENSE / HTA MELBOURNE NADCAP (Heat Treating) 3 AS 9100C 5-6 HTA SYDNEY
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHANGHAI INSPECTION AND TESTING INSTITUTE OF INSTRUMENTS AND AUTOMATION SYSTEMS CO., LTD. 103 Cao Bao Road Shanghai, 200233 People s Republic of China Mr. Xu
More informationEU Declaration of Conformity
24 March 2016 EU Declaration of Conformity Model Number: ET3202L, ET4202L, ET4602L Equipment Category: Information Technology and Telecommunications Equipment Equipment Class: Commercial and Light Industrial
More informationCO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 PPE-R/00.017 Version 2 RECOMMENDATION FOR USE Number of pages: 5 Approval stage : Approved on : Origin : Horizontal Committee, C2D Ad hoc group
More informationValve Manufacturers Association of America
BUSINESS ASSURANCE Valve Manufacturers Association of America 2016 Technical Seminar: EU s New Legislation Framework (NLF) - What this means to you. Mike Norman 1 VMA Technical Session - March 2016 SAFER,
More informationJBCE input for the RoHS FAQ document
JBCE input for the RoHS FAQ document JBCE welcomes the recast of the RoHS Directive 2011/65/EU (hereafter generally referred to as RoHS 2 ) 1 and appreciates the ongoing work by the Commission in realizing
More informationÜntel is ready for CPR
2016 Üntel is ready for CPR Hakan Kubas Marketing Manager 01.11.2016 Construction Products Regulation What is the CPR? The Construction Products Regulation (CPR) lays down conditions for the placing or
More informationThe European Radio Equipment Directive 2014/53/EU
TÜV SÜD Slide 1 The European Radio Equipment Directive 2014/53/EU 28 March 2017 Meet the speaker behind the voice Jon Lea Senior Engineer (Product Certification), TÜV SÜD 30 years experience in the testing
More informationIntroduction of Hanbell and
Introduction of Hanbell and RC2 Series Screw Compressor Jude Chen April 2, 2007 Content 1.Hanbell Company Profile 2.Hanbell Machinery & Production 3.Basic Mechanism of Hanbell Screw Compressor 4.Hanbell
More informationDECLARATION OF PERFORMANCE. DoP: 0124 for fischer Ceiling Anchor FDZ (Metal anchors for use in concrete (light-duty type)) EN
DECLARATION OF PERFORMANCE DoP: 0124 for fischer Ceiling Anchor FDZ (Metal anchors for use in concrete (light-duty type)) EN 1. Unique identification code of the product-type: DoP: 0124 2. Intended use/es:
More informationReport No EC. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS ATEX CERTIFICATION REPORT. Electronstandart-pribor
Report No. 3040249EC FM Approvals Ltd 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS ATEX CERTIFICATION REPORT Product: Model and/or Type Reference: Flame Detector IPES-IR3 Description of the Product:
More informationProduct Compliance Andy Guest
Product Compliance Andy Guest EDA Forum November 2015 www.thelia.org.uk What do we mean by compliant in lighting? How do we know products are compliant? Its CE Marked That means its OK doesn t it? What
More informationThe European Standardization System. Diana Dus Programme Manager International Cooperation
The European Standardization System Diana Dus Programme Manager International Cooperation The European Standardization Organizations (ESOs) CEN... (European Committee for Standardization) CENELEC... (European
More informationWhere Process Safety meets Machine Safety
Where Process Safety meets Machine Safety A document to aid understanding between the end-user and machine builder for functional safety issues. by The 61508 Association Overriding key principle...it must
More informationThe New EU-Regulation on Construction Products
The New EU-Regulation on Construction Products Dr. Rainer Mikulits Managing Director Austrian Institute of Construction Engineering (OIB) IRCC Meeting 12-14 May 2010, Tokyo, Japan Contents European Construction
More informationStandards in Security Shutters & Fire Shutters (UK & USA)
Standards in Security Shutters & Fire Shutters (UK & USA) Jason Powell 17.11.17 For UKRS Ltd Contents 1. Roller Shutter Safety Standards 1.1 UK / Europe 1.2 USA 2. Fire Shutter / Curtain Standards 2.1
More informationCE Compliance. Silva Management. September 18th, 2014 David Norris. C Eng. FI Mech E.
David Norris C Eng. FI Mech E. Recent employment positions. Consultant to Machine Tool companies. Technical Director, Bridgeport Machines Ltd. Engineering V.P., Bridgeport Machines Inc. We will consider
More informationStandardization, conformity attestation and accreditation in the Republic of Belarus. Valery N. Koreshkov, Chairman of Gosstandart
Standardization, conformity attestation and accreditation in the Republic of Belarus Valery N. Koreshkov, Chairman of Gosstandart Development of standardization in the Republic of Belarus is based on:
More informationThis second part of the lesson & is dedicated to EMC legal aspect and standards.
This second part of the lesson & is dedicated to EMC legal aspect and standards. We should begin by a first part on the last version of the European directive 2014/30/UE which concerns electronic products
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1 BUREAU VERITAS ADT (SHANGHAI) CORPORATION No.829, Xin Zhuan Road, Song Jiang District, Shanghai, China Ms. Amanda Cao (Authorized Representative) Phone: 86
More informationEC TYPE EXAMINATION (Module B) CERTIFICATE MARINE EQUIPMENT DIRECTIVE Certificate No.: 0832-MED-1019
MARINE EQUIPMENT DIRECTIVE This is to certify that BRE Global Ltd, as specified as a notified body under the terms of the Statutory Instrument 1999 No. 1957 The Merchant Shipping (Marine Equipment) Regulations
More informationTest Report. Appliance EMF Testing
Project: 11014506A Date: November 6, 2015 Model: 120V_WWF13NW Test Report On Appliance EMF Testing Copyright 2005 UL LLC UL LLC authorizes the above-named company to reproduce this Report provided it is
More informationThe ATEX Directive 94/9/EC
The ATEX Directive 94/9/EC operation and perspectives in Europe and the World The ATEX sector in the European Union From the Market description, competitiveness analysis in the field of products and protective
More informationEUROPUMP ATEX Guideline Part II
EUROPEAN ASSOCIATION OF PUMP MANUFACTURERS ASSOCIATION EUROPÉENNE DES CONSTRUCTEURS DE POMPES EUROPÄISCHE VEREINIGUNG DER PUMPENHERSTELLER EUROPUMP ATEX Guideline Part II Application of the EC-Guidelines
More informationDomestic Nuclear Detection Office (DNDO)
Domestic Nuclear Detection Office (DNDO) Graduated Rad/Nuc Detector Evaluation and Reporting (GRaDER SM ) Program Testing Update Meeting Focus: ANSI Testing to Meet State and Local User Needs Presented
More informationei DG UV Test EC-Type Examination (Module B) Certificate Certificate No
European notified body Identification number 0736 ei DG UV Test Prüf- und Zertifizierungsstelle BG Verkehr Dienststelle Schiffssicherheit EC-Type Examination (Module B) Certificate Certificate No. 223.002
More informationCPR Guide: EU Rules Practical Impact
CPR Guide: EU Rules Practical Impact December 2015 Glass for Europe is the trade association for Europe s manufacturers of flat glass. Flat glass is the material that goes into a variety of end products
More information