Certificato numero: 300 RIVA TECNOIMPIANTI S.R.L. UNI EN ISO 9001 : 2015 ISO 9001 : 2015
|
|
- Junior Peters
- 5 years ago
- Views:
Transcription
1 IIS - Founding Member of IIS - Founding Member of Si certifica che la Società We hereby certify that the Company Unità operativa / Branch Certificato numero: 300 Certificate number applica un Sistema di Gestione per la Qualità conforme ai requisiti della norma operates a Quality Management System fulfilling the requirements of UNI EN ISO 9001 : 2015 ISO 9001 : 2015 campo di applicazione / field of application : Fabbricazione di: centrali e impianti oleodinamici, carpenteria metallica. Fabbrication of : plant and hydraulic systems, steel structures. Settori EA / EA Sectors 17 Ulteriori informazioni riguardanti il campo di applicazione di questo certificato e l'applicabilità dei requisiti ISO 9001:2015 possono essere ottenute consultando l'organizzazione. Any further information about the scope of this certificate and the applicability of ISO 9001:2015 can be obtained consulting the organization. Prima emissione / First issue 04/11/2008 L' Organo Deliberante Il Direttore Tecnico IIS CERT Emissione corrente / Current issue 24/10/2017 Giuseppe Perelli Data di scadenza / Expiry date 07/10/2020 SGQ n 021A PRS n 021C PRD n 021B SGA n 033D Membro degli Accordi di Mutuo Riconoscimento EA, IAF e ILAC Signatary of EA, IAF and ILAC Mutual Recognition Agreement Il presente certificato è soggetto al rispetto delle condizioni stabilite nel regolamento IIS CERT QAS 017 R. This certificate complies with the terms estabilished by IIS CERT document QAS 017 R. IIS CERT Srl Lungobisagno Istria 29 R GENOVA - Corporate Governance Istituto Italiano della Saldatura
2 EC CERTIFICATE OF FACTORY PRODUCTION CONTROL No.: 0475-CPR-273 In compliance with Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 march 2011, laying down harmonised conditions for the marketing of construction products, it has been stated that the construction product Steel structural component up to EXC 3 in accordance with EN Declaration method : Fabbrication processes included : 1-3a according to table A.1 of EN : A1:2011, Annex A Preparation - Assembly - Welding outsourced : Corrosion protection excluded : Mechanical fastening Welding certificate : This certificate is valid only in conjunction with the welding certificate No. 2/IT/205 issued by IIS CERT in accordance with EN ISO Remarks : produced by the manufacturer in the factory is submitted by the manufacturer to the initial type-testing of the product, a factory production control and to the further testing of samples taken at the factory in accordance with a prescribed test plan and that the notified body IIS CERT (No. 0475) has performed the initial inspection of the factory and of the factory production control and performs the continuous surveillance, assessment and approval of the factory production control. This certificate attests that all provisions concerning the attestation of factory production control described in Annex ZA of the following Standard were applied. EN : A1:2011 This certificate was first issued on 06 December 2016 and remains valid as long as the conditions laid down in the technical specification in reference or the manufacturing conditions in the factory or the factory production control itself are not modified significantly. Current issue, 02/08/2017 Revision n. 1 Decision Making Authorithy Mr. Giuseppe Perelli Technical Manager Dr. Eng. Stefano Morra IIS CERT Srl Lungobisagno Istria 29 R GENOVA - Corporate Governance Istituto Italiano della Saldatura
3 INTERNATIONAL INSTITUTE OF WELDING Having satisfied the requirements of the IIW Manufacturer Certification Scheme according to ISO 3834 Company: The Unit : Located in: is certified in accordance with UNI EN ISO 3834 Part 2 for the product(s): Centrali e impianti oleodinamici e carpenteria. Central and hydraulic systems and carpentery. with the scope of work stated in the attached Schedule Certificate number and revision status: First issue date : 4 November 2008 Current issue date : 24 October 2017 Date of expiry : 7 October /IT/205 Rev. 3 ANBCC: IIS CERT Srl Lungobisagno Istria, 29 r - GENOA (ITALY) SGQ n 021 A PRD n 021 B SGA n 033 D PRD n 021 C SCR n 029 F ISP n 120 F Membro degli accordi di mutuo riconoscimento EA, IAF e ILAC Signatary of EA, IAF and ILAC Mutual recognition agreement This Certificate is subject to the rules estabilished by IIW for the certification of Companies IL PRESENTE DOCUMENTO COSTITUISCE UNA RIPRODUZIONE DELL' ORIGINALE INVIATO IN FORMA CARTACEA
4 IIW Manufacturer Certification Scheme SCHEDULE Extent of validity of IIW Certificate No. 2/IT/205 Rev. 3 Product standards(s): Customer specifications Alternative standard(s) (refer to ISO ) ASME IX; AWS D1.1 Welding processes (ISO 4063) Parent material groups (ISO / TR 15608) Responsible Coordination Personnel : Name Qualification Job function and level *** RIVA Eugenio EWT Responsible - Comprehensive RIVA Alberto IIS Approval Deputy - Specific *** The level must be stated in order to comply with ISO The standards and documents referred in the certificate and schedule are those valid at the time of certification
5 EUROPEAN FEDERATION FOR WELDING, JOINING AND CUTTING Having satisfied the requirements of the EWF Manufacturer Certification System for the following Schemes(s): Welding Quality Management Scheme EN ISO 3834 Part 2 (Doc. EWF Part 1) The Unit : Located in: Company: is certified for the product(s): Centrali e impianti oleodinamici e carpenteria. Central and hydraulic systems and carpentery. with the scope of work stated in the attached Schedule Certificate number and revision status: First issue date : 4 November 2008 Current issue date : 24 October 2017 Date of expiry : 7 October 2020 Chairman 2/IT/205 Rev. 3 SGQ n 021 A PRD n 021 B SGA n 033 D PRD n 021 C SCR n 029 F ISP n 120 F Membro degli accordi di mutuo riconoscimento EA, IAF e ILAC Signatary of EA, IAF and ILAC Mutual recognition agreement ANBCC: IIS CERT srl Lungobisagno Istria 29 r - GENOVA (ITALIA) This certificate is subject to the rules estabilished by EWF for the certification of Companies IL PRESENTE DOCUMENTO COSTITUISCE UNA RIPRODUZIONE DELL' ORIGINALE INVIATO IN FORMA CARTACEA
6 EWF Manufacturer Certification System SCHEDULE Extent of validity of IIW Certificate No. 2/IT/205 Rev. 3 Product standards(s): Customer specifications Alternative standard(s) (refer to EN ISO ) ASME IX; AWS D1.1 Welding processes (ISO 4063) Parent material groups (ISO / TR 15608) Responsible Coordination Personnel : Scheme ** Name Qualification Job function and level *** ISO 3834 RIVA Eugenio EWT Responsible - Comprehensive ISO 3834 RIVA Alberto IIS Approval Deputy - Specific ** Specify ISO 3834, EMS or SMS *** In the case of EN ISO 3834 scheme, the level must be stated in order to comply with EN ISO Chairman Genova, IT 24 October 2017
CERTIFICATE. Conformity of the Factory Production Control CPR TÜVRh
CERTIFICATE Conformity of the Factory Production Control 0035-CPR-1090-1.00794.TÜVRh.2017.003 In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the
More informationASTM E 84 Surface Burning Characteristics of "12 mm Stratificato Panel"
UNCONTROLLED ELECTRONIC COPY ASTM E 84 Surface Burning Characteristics of "12 mm Stratificato Panel" A Report To: ABET Inc. 60 West Sheffield Avenue Englewood, NJ 07631 USA Phone: 201-541-700 Web: www.abetlaminati.com
More informationCESI,...dlSmES!r.~t: EXTENSION n. 05/15 ~ FGH ~ to EC-Type Examination Certificate CESI 02ATEX015X Equipment: lnductive transducer type ETHA-4/. Manufacturer: ATOS S.p.A. Address: Via alla Piana, 57-210
More informationCESI EXTENSION D. 02/12 ~ FGH ~ to EC-Type Examination Certificate CESI 03A TEX057X Equipment: Explosion proofsolenoid series OA-; OZA; MZA-A- Manufacturer: ATOS S.p.A. Address: Via alla Piana, 57-21018
More informationTHE IMPORTANCE OF THE RESPONSIBLE WELDING COORDINATOR IN STRUCTURAL METALWORKS ACCORDING TO THE REQUIREMENTS OF EN CE MARKING
HELLENIC WELDING ASSOCIATION THE IMPORTANCE OF THE RESPONSIBLE WELDING COORDINATOR IN STRUCTURAL METALWORKS ACCORDING TO THE REQUIREMENTS OF EN 1090-1 CE MARKING Dr. Ioannis Kordatos General Manager HWA
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 687rev1 2015-06-02 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 I - Drafting
More informationSD119 Range of Conventional Smoke and Smoke/Heat Detectors (refer to attached appendix for details and conditions)
In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation), this certificate applies to the construction product(s).
More informationCESI EXTENSION D. 02/12 ~ FGH ~ to EC-Type Examination Certificate CESI 03A TEX057X Equipment: Explosion proofsolenoid series OA-; OZA; MZA-A- Manufac
CESI EXTENSION D. 02/12 ~ FGH ~ to EC-Type Examination Certificate CESI 03A TEX057X Equipment: Explosion proofsolenoid series OA-; OZA; MZA-A- Manufacturer: ATOS S.p.A. Address: Via alla Piana, 57-21018
More informationRegulation (EU) No 305/2011 laying down harmonised conditions for the marketing of construction products (EU CPR)
November 2013 Last updated: June 2015 Regulation (EU) No 305/2011 laying down harmonised conditions for the marketing of construction products (EU CPR) Frequently Asked Questions Part IV Preliminary remarks
More informationDECLARATION OF CONFORMITY FOR THE MEDICAL DEVICE FAMILY LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES
FLOW METER S.p.A. Capitale Sociale: 234.000 int. versato Sede legale: Via del Lino, 6-24040 LEVATE (Bg) Amministrazione e Stabilimenti: Via del Lino, 6-24040 LEVATE (Bg) Tel. +39/035/594047 - Telefax +39/035/594821
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SONY GLOBAL MANUFACTURING & OPERATIONS CORPORATION EMC/RF TEST LABORATORY - MAIN LAB 8-4 Shiomi Kisarazu-shi Chiba-ken, 292-0834, Japan Mr. Koichi.Hiyaoka Phone:
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 29.6.2017 C(2017) 4408 final COMMISSION DELEGATED REGULATION (EU) /... of 29.6.2017 amending Commission Delegated Regulation (EU) No 151/2013 of 19 December 2012 supplementing
More informationThe Machinery Directive 2006/42/EC
The Machinery Directive 2006/42/EC Aims of the Machinery Directive To ensure the free movement of machinery on the EU market whether manufactured in the EU or imported To ensure a high level of protection
More informationContents. EN :2012 (E) Issue 5 ( ) Page
Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...
More informationGuidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU
GNB-CPR AG Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU NB-CPR/AG/03/002r3 Issued: 24 May 2013 APPROVED GUIDANCE GNB-CPR AG position paper Guidance to
More informationUpdated 04/07/2017 Page 1/8
FLOW METER S.p.A. Capitale Sociale: 234.000 int. versato Sede legale: Via del Lino, 6 24040 LEVATE (Bg) Amministrazione e Stabilimenti: Via del Lino, 6-24040 LEVATE (Bg) Tel. +39/035/594047 - Telefax +39/035/594821
More informationValve Manufacturers Association of America
BUSINESS ASSURANCE Valve Manufacturers Association of America 2016 Technical Seminar: EU s New Legislation Framework (NLF) - What this means to you. Mike Norman 1 VMA Technical Session - March 2016 SAFER,
More informationManagement Systems Certification Ltd
Management Systems Certification Ltd 48 South Street, New Ross, Co. Wexford Management Systems Certification Body Registration number: 5011 is accredited by the Irish National Board (INAB) to undertake
More informationDEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID. NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008)
STAATSKOERANT, 19 NOVEMBER 2010 No.33763 11 No. R. 1072 DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID 19 November 2010 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5
More informationTechnical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme:
Technical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme: Solar products and components Accreditation Kiwa Italia S.p.A. Via Treviso 32/34 31020 San Vendemiano (TV) Italia Tel: +39
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 8.3.2018 C(2018) 1392 final COMMISSION DELEGATED REGULATION (EU) /... of 8.3.2018 establishing common safety methods on safety management system requirements pursuant to Directive
More informationCo-ordination of the Group of Notified Bodies for the Construction Products /Regulation 305/2011/EU
GNB-CPR AG Co-ordination of the Group of Notified Bodies for the Construction Products /Regulation 305/2011/EU NB-CPR/AG/03/003r8a Issued: 18 December 2013 APPROVED GUIDANCE GNB-CPR position paper Generic
More informationBUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305
More informationbest practice guide Pedestrian doorsets Fire resisting and/or smoke control characteristics - to
best practice guide Pedestrian doorsets Fire resisting and/or smoke control characteristics - to BS EN 16034: 2014 Permission to reproduce extracts from BS EN 16034 : 2014 is granted by BSI. DHF BEST PRACTICE
More informationThe New EU-Regulation on Construction Products
The New EU-Regulation on Construction Products Dr. Rainer Mikulits Managing Director Austrian Institute of Construction Engineering (OIB) IRCC Meeting 12-14 May 2010, Tokyo, Japan Contents European Construction
More information1. Terms defined in the Construction Products Regulation (CPR)
CEN/TC 351 Glossary of relevant terms related to the CPR The following list of terms provides definitions of terms related to the CPR (EU/305/2011) which are relevant for the work of CEN/TC 351 Construction
More informationRENAR Accreditation Activities
RENAR accreditation activities represent the scopes where RENAR has competence to provide accreditation services. RENAR defined its accreditation activities in accordance with the EA MLA scope (EA multilateral
More informationBUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,
More informationNotified Body No.: 0098
Certificate No: MEDB00003SJ Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED). This Certificate is issued by DNV GL SE based on the notification of the Federal Maritime and
More informationSPECIFICATION SHEET. Installation, Operation, Maintenance Instructions for safety use Series EX SOCKET SWITCH
Page /3 SPECIFICATION SHEET Ed. Document UTE_ Issued Written Verified Approved MP36350 6-05-05 Strizzi Franco Page /3 INDICE HISTORY... 3 MODIFY RECORDING... 3 INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
More informationARCHITECTURE 2018-REV:00
ARCHITECTURE 2018-REV:00 PORTFOLIO 2018 Tender Regium Waterfront Location: Reggio Calabria (RC)Italy Area: 228.900 square meters Design period: 2007 Design level: International design competition, in accordance
More informationCylinder Mortice Dead lock Lockcase(mm) A=87 Backset (mm) B=55. Follower (mm) 8 Latch Bolt
Product ID: KL.1902 Name: Cylinder Mortice Dead lock Lockcase(mm) A=87 Backset (mm) B=55 Centres C=N/A Follower (mm) 8 Latch Bolt N/A Mechanism Euro- Profile Forend Finish SSS Rebates available (mm) KL.1902A
More informationGNB-CPR Position Paper: Issuance of certificates under CPR
GNB-CPR AG Co-ordination of the Group of Notified Bodies for the Construction products Regulation (EU) No 305/2011 NB-CPR/14-612r7 Issued: 18 August 2016 APPROVED GUIDANCE GNB-CPR Position Paper: Issuance
More informationImplementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -
TF N 530 Rev.2 2012-04-13 CONSTRUCTION SECTOR STANDARDIZATION GUIDANCE DOCUMENT Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA - 1 Drafting
More information(Text with EEA relevance)
L 301/14 18.11.2015 COMMISSION IMPLEMTING REGULATION (EU) 2015/2065 of 17 November 2015 establishing, pursuant to Regulation (EU) No 517/2014 of the European Parliament and of the Council, the format for
More informationMARKING EC Directive 97/23 PED (Pressure Equipment Directive)
MARKING EC Directive 97/23 PED (Pressure Equipment Directive) Field of application The Directive applies to the design, manufacturing and conformity assessment of the pressure equipment and of their groups
More informationCOMMISSION DELEGATED REGULATION (EU) /... of XXX
Ref. Ares(2017)4156968-24/08/2017 EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION DELEGATED REGULATION (EU) /... of XXX establishing common safety methods on safety management system requirements
More informationETICS and the EU Internal Market The European framework. G. Katsarakis European Commission, DG GROWTH Unit C-1: Clean technologies and products
ETICS and the EU Internal Market The European framework G. Katsarakis European Commission, DG GROWTH Unit C-1: Clean technologies and products 1 THE EU CONSTRUCTION SECTOR The importance of the construction
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Accredited to ISO17065:2012 to provide product conformity Octagon House Concorde Way Segensworth North Fareham Hampshire PO15 5RL Contact: Mr Mark Jenkins Tel: +44 (0) 1489 558258 Fax: +44 (0)1489 558101
More informationBUILDING CATALOGUE
01 2018 BUILDING CATALOGUE 02 04 08 BARBIDREN APPC 100% polypropylene geotextile virgin flock 05 new BARBIDREN AMPC polypropylene geotextile 06 BARBIDREN AFVC 100% polyester geotextile virgin flock 07
More informationCooper Lighting & Safety Limited Wheatley Hall Road, Doncaster, DN2 4NB, United Kingdom
In compliance with Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the construction
More informationC e r t i f i c a t e Of Conformity No.: 0560-CPD /AA/05
C e r t i f i c a t e Of Conformity No.: 0560-CPD-10219002/AA/05 In compliance with the procedure specified in RD_090, Telefication declares as designated Notified Body for the European Construction Products
More informationEUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY
EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR HEALTH AND FOOD SAFETY Brussels, 23 October 2018 REV1 Replaces the Q&A document published on 13 September 2017 QUESTIONS AND ANSWERS RELATED TO THE UNITED KINGDOM'S
More informationGeorgios Katsarakis European Commission
Georgios Katsarakis European Commission Single Market Strategy of the European Commission G. Katsarakis (DG GROW/C.1) The Single Market strategy of the European Commission In January 1985, the President
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL TECHNICAL SYSTEMS (NTS) - LONGMONT 1736 Vista View Drive Longmont, CO 80504-5242 Mr. Eric Loucks Phone: 303 776 7249 ELECTRICAL Valid To: August 31,
More informationCPR, CE-marking of construction products 1
Revision 1, proposed by BT3+4 on 20160308, approved by the Board of Directors on 20160311 CPR, CE-marking of construction products 1 1 CPD, CPR, primacy of the CPR on the standards 1. The CE-marking of
More informationPolish Centre for Accreditation
2017 Polish Centre for Accreditation at Taiwan Accreditation Foundation Polish Centre for Accreditation 42 Szczotkarska Street 01-382 Warsaw, Poland Ms Lucyna Olborska Director of Polish Centre for Accreditation
More informationMandate M/118 WASTE WATER ENGINEERING PRODUCTS
Mandate M/118 Page 1 sur 13 Mandate M/118 TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CReatE RELATED TO THE FOLLOWING END USES 18/33 : DRAINAGE (INC. HIGHWAS)
More informationFrequently Asked Questions on the Construction Products Regulation (CPR) - Enterprise and Industry
1. Must a construction product bear the CE marking after 30/06/2013? After 30/06/2013, in order to sell a construction product in the European Union (EU) the manufacturer has the obligation to issue a
More informationPressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"
D. EVALUATION ASSESSMENT PROCEDURES Guideline D-01 Guideline related to: Annex III, module G Is design approval by a notified body required under module G? Module G does not explicitly require formal design
More informationsafety requirements are to comply with this compulsory specification twelve (12) months after the publication of this notice.
28 No. 38232 GOVERNMENT GAZETTE, 28 NOVEMBER 2014 DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID No. 944 28 November 2014 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 1.7.2015 C(2015) 4394 final COMMISSION DELEGATED REGULATION (EU) /... of 1.7.2015 on the classification of the reaction to fire performance of construction products pursuant
More informationCertificate of Compliance
European Conformity Ente Certificazione Macchine Srl شھادة 증명서 Certificate Cертификат Certificat Certificate of Compliance No. 2Z171127.SBMTN21 Certificate s Holder: Certification ECM Mark: Product: Model(s):
More informationBUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN-CLC/TC 3 QUALITY MANAGEMENT AND CORRESPONDING GENERAL ASPECTS FOR MEDICAL DEVICES EXECUTIVE SUMMARY Business Environment The area of responsibility of CEN-CLC/TC 3 Quality management
More informationBUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY Standards to be delivered by this TC cover pipe products for the construction of public, industrial or private
More informationConformity assessment procedures for the Alarm Components Scheme
Conformity assessment procedures for the Alarm RD_070, Issue 20 This guide describes the conformity assessment procedures for Alarm Components. This Alarm certifies that Alarm Components comply with technical
More informationSolar Keymark in Europe. DI (FH) Gundula Tschernigg AIT Austrian Institute of Technology
Solar Keymark in Europe DI (FH) Gundula Tschernigg AIT Austrian Institute of Technology What may have the following things in common? floor heating waste water pipe thermal insulation cast iron pipes sun
More informationOfficial Journal of the European Union. (Non-legislative acts) REGULATIONS
19.6.2015 L 154/1 II (Non-legislative acts) REGULATIONS COMMISSION DELEGATED REGULATION (EU) 2015/942 of 4 March 2015 amending Delegated Regulation (EU) No 529/2014 supplementing Regulation (EU) No 575/2013
More informationEUROPUMP ATEX Guideline Part II
EUROPEAN ASSOCIATION OF PUMP MANUFACTURERS ASSOCIATION EUROPÉENNE DES CONSTRUCTEURS DE POMPES EUROPÄISCHE VEREINIGUNG DER PUMPENHERSTELLER EUROPUMP ATEX Guideline Part II Application of the EC-Guidelines
More informationCOMMISSION DELEGATED DECISION (EU) / of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2018) XXX draft COMMISSION DELEGATED DECISION (EU) / of XXX supplementing Regulation (EU) No 305/2011 of the European Parliament and of the Council with regard to
More informationStandardization, conformity attestation and accreditation in the Republic of Belarus. Valery N. Koreshkov, Chairman of Gosstandart
Standardization, conformity attestation and accreditation in the Republic of Belarus Valery N. Koreshkov, Chairman of Gosstandart Development of standardization in the Republic of Belarus is based on:
More informationGASTEC QA. Approval Requirements 200. for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE)
KE 200 March 2012 GASTEC QA Approval Requirements 200 for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE) Foreword These GASTEC QA Approval requirements have
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 26.1.2017 C(2017) 315 final COMMISSION DELEGATED REGULATION (EU) /... of 26.1.2017 on the classification of frost resistance performance for clay tiles under EN 1304 pursuant
More informationCOMMISSION DELEGATED REGULATION (EU) No /.. of
EUROPEAN COMMISSION Brussels, 4.3.2015 C(2015) 1365 final COMMISSION DELEGATED REGULATION (EU) No /.. of 4.3.2015 amending Delegated Regulation (EU) No529/2014 supplementing Regulation (EU) No 575/2013
More informationGuidelines Cooperation between authorities under Articles 17 and 23 of Regulation (EU) No 909/2014
Guidelines Cooperation between authorities under Articles 17 and 23 of Regulation (EU) No 909/2014 11 July 2017 ESMA70-151-435 Table of Contents 1 Scope... 3 2 Purpose... 5 3 Compliance and reporting obligations...
More informationFor structural use in all types of construction works according to EN
DECLARATION OF PERFORMANCE 1 N 1090-10025 EN 1090-1 DoP ENG. 02 EN10025-2 1 Unique identification code of the product-type: Component(s) 2 according to EN 1090-2 following customer s specification and
More informationPART 3-O REQUIREMENTS FOR SPRINKLER SYSTEMS MAINTENANCE AND SUPERVISION. 3-O Introduction O.1 Scope of Maintenance and Supervision...
CONTENTS Schedule of amendments for this part of the scheme document Page 1 of 14 3-O Introduction...3 3-O.1 Scope of Maintenance and Supervision...3 3-O.2 Certification conditions...5 3-O.3 LPS 1233 Service
More informationThe ATEX Directive 94/9/EC
The ATEX Directive 94/9/EC operation and perspectives in Europe and the World The ATEX sector in the European Union From the Market description, competitiveness analysis in the field of products and protective
More informationEC CERTIFICATE OF CONFORMITY 0432 CPD 0018
EC CERTIFICATE OF CONFORMITY 0432 CPD 0018 In compliance with the Directive 89/106/EEC of the Council of European Communities of 21 December 1988 on the approximation of laws, regulations and administrative
More informationConstruction Products Directive
Construction Products Directive Evaluation of conformity of Coated glass to he N 1096-4 ( September 2006) G E P V P, T H E E U R O P E A N A S S O C I AT I O N O F F L AT G L A S S M A N U FA C T U R E
More informationGASTEC QA. Evaluation Guideline KE 192. Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment
KE 192 - A1 March 2012 GASTEC QA Evaluation Guideline KE 192 Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment Foreword and introduction These GASTEC QA Approval
More informationEurofyre Limited range of ProFyre C24 Control and Indicating Equipment (refer to attached appendix for details and conditions) Certification Manager
In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation), this certificate applies to the construction product(s) Product(s):
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. F2 LABS Peters Road Middlefield, OH Wendy Fuster Phone: Ext.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 F2 LABS 16740 Peters Road Middlefield, OH 44062 Wendy Fuster Phone: 301 253 4500 Ext. 101 ELECTRICAL (EMC) Valid To: November 30, 2019 Certificate Number: 0793.02
More informationBUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 160 PROTECTION AGAINST FALLS FROM A HEIGHT INCLUDING WORKING BELTS EXECUTIVE SUMMARY Business environment Products Personal fall arresting systems and components Personal equipment
More informationLiving with the Construction Products Directive - The Role of the Notified Bodies
Living with the Construction Products Directive - The Role of the Notified Bodies Francky Callewaert DG Enterprise The core of the CE marking Is obligatory for every construction product placed on the
More informationEuropean Technical Approval ETA-08/0035 This ETA replaces ETA-08/0035 with validity from till
SINTEF Building and Infrastructure P.O.Box 124 Blindern N-0314 Oslo Tel. 47 22 96 55 55 Fax 47 22 69 54 38 Authorised and notified according to Article 10 of the Council Directive 89/106/EEC of 21 December
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD AMERICA INC. 10 Technology Drive (Test Laboratory) Peabody, MA 01960 Mr. William Stinson Phone 1 978 573 2517 ELECTRICAL Valid To: December 31, 2019
More informationShipboard incinerators with capacities up to 4000 kw
STANDARD FOR CERTIFICATION No. 2.9 Approval Programmes Type Approval Programmes for Marine Equipment Directive (MED) No. 431.90 - MED A.1/2.7 Shipboard incinerators with capacities up to 4000 kw JANUARY
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE MANAGEMENT GROUP (CMG) 1 257 Simarano Drive, Suite 4 Marlborough, MA 01752 Authorized Representative: Mike Morrow Phone: 508 460 1400 ext. 222 Email:
More informationei DG UV Test EC-Type Examination (Module B) Certificate
European notified body Identification number 0736 ei DG UV Test Prüf- und Zertifizierungsstelle BG Verkehr Dienststelle Schiffssicherheit EC-Type Examination (Module B) Certificate Certificate No. 100.185
More informationCouncil of the European Union Brussels, 22 March 2018 (OR. en)
Council of the European Union Brussels, 22 March 2018 (OR. en) Interinstitutional File: 2018/0068 (NLE) 7436/18 PROPOSAL From: date of receipt: 21 March 2018 To: No. Cion doc.: Subject: AELE 12 EEE 8 N
More informationDomestic Nuclear Detection Office (DNDO)
Domestic Nuclear Detection Office (DNDO) Graduated Rad/Nuc Detector Evaluation and Reporting (GRaDER SM ) Program Testing Update Meeting Focus: ANSI Testing to Meet State and Local User Needs Presented
More informationImplementing the Construction Products Regulation (EU) 305/2011
Implementing the Construction Products Regulation (EU) 305/2011 G. Katsarakis European Commission, DG Enterprise and Industry Unit B-1: Sustainable Industrial Policy and Construction THE EU CONSTRUCTION
More informationCO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 PPE-R/00.017 Version 2 RECOMMENDATION FOR USE Number of pages: 5 Approval stage : Approved on : Origin : Horizontal Committee, C2D Ad hoc group
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COMPLIANCE CERTIFICATION SERVICES, INC. 1 Xindian Laboratory No.163-1, Jhongsheng Road Xindian District, New Taipei City 23151, Taiwan, R.O.C. Contact: Kurt
More informationCouncil Directive 93/68/EEC of 22 July 1993 amending Directives
Council Directive 93/68/EEC of 22 July 1993 amending Directives 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility),
More informationGASTEC QA. Evaluation Guideline KE 191. Amendment A1 Excess flow valves. KE A1 March 2012
KE 191 - A1 March 2012 GASTEC QA Evaluation Guideline KE 191 Amendment A1 Excess flow valves Foreword and introduction These GASTEC QA Approval requirements amendment have been accepted by the Board of
More informationApproval certificate. Certificato di approvazione CA FIVEP SPA VIA G. A. PRATO ROVERETO TN IT - Italy. Proiettori ( Serie OLSYS 2 )
PID: 04010012 CID: C.1993.5503 Certificato di approvazione Approval certificate IMQ, ente di certificazione accreditato, autorizza la ditta IMQ, accredited certification body, grants to FIVEP SPA VIA G.
More informationEN Electrical Equipment of non-electric appliances for household and similiar purposes Safety requirements
EN 50165 Electrical Equipment of non-electric appliances for household and similiar purposes Safety requirements J. Stenger CLC/TC61/WG3 24. April 2002 1 History Gas-Appliance Directive 96/306/EEC Annex
More informationThe Danish Energy Authority to carry out inspections in June and July 2012
The Danish Energy Authority to carry out inspections in June and July 2012 We check the CE marking of the insulation products of expanded polystyrene (EPS) you sell or use. And we check if you have declared
More informationei DG UV Test EC-Type Examination (Module B) Certificate A.1/3.27 a Penetrations through "B" Class divisions (electric cable transits)
European notified body Identification number 0736 ei DG UV Test Prüf- und Zertifizierungsstelte BG Verkehr Dienststelle Schiffssicherheit EC-Type Examination (Module B) Certificate Certificate No. 108.036
More informationCOMMISSION DECISION. of
EUROPEAN COMMISSION Brussels, 1.6.2015 C(2015) 3559 final COMMISSION DECISION of 1.6.2015 recognising DIN CERTCO Gesellschaft für Konformitätsbewertung mbh, as a monitoring organisation pursuant to Regulation
More informationCE MARKING OF WOOD-BASED PANELS
28 Market Place Grantham Lincolnshire NG31 6LR Tel: 00 44 (0) 1476 563707 Fax: 0044 (0) 1476 579314 e-mail: wpif.panelboards@virgin.net WOOD PANEL INDUSTRIES FEDERATION CE MARKING OF WOOD-BASED PANELS
More informationBUSINESS PLAN. CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 336 BITUMINOUS BINDERS Version 2018 EXECUTIVE SUMMARY BUSINESS ENVIRONMENT The parties interested in the bituminous binder market are the following industries: - the bituminous
More informationISO 9001:2015 TRANSITIONS
Copyright 2015 MAS Solutions LLC. All Rights Reserved. 1 ISO 9001:2015 TRANSITIONS Transition Strategies Copyright 2015 MAS Solutions LLC. All Rights Reserved. 2 TRANSITION STRATEGIES Andy Warhol, Butterfly,
More informationDECLARATION OF PERFORMANCE 1 N. For structural use in all types of construction works according to EN
DECLARATION OF PERFORMANCE 1 N EN 1090-1 DoP ENG. 03 EN10210-2 1 Unique identification code of the product-type: Component(s) 2 according to EN 1090-2 following customer s specification and produced out
More informationControlled Door Closing Devices
Controlled Door Closing Devices to BS EN 1154: 1997 + A1:2003 www.dhfonline.org.uk 01 dhf Best Practice dhf Best Practice : Controlled Door Closing Devices to BS EN 1154: 1997 + A1:2003 dhf Best Practice
More informationCOMMISSION IMPLEMENTING REGULATION (EU) /... of XXX. on the European Rail Traffic Management System European deployment plan
EUROPEAN COMMISSION Brussels, XXX [ ](2016) XXX draft COMMISSION IMPLEMENTING REGULATION (EU) /... of XXX on the European Rail Traffic Management System European deployment plan EN EN COMMISSION IMPLEMENTING
More informationS170 - SOLAR STORAGE-TO-BOILER CONNECTION KIT WITH THERMAL INTEGRATION
FUNCTION The solar storage-to-boiler connection kits automatically control and optimize the terminal energy contained in a solar water storage, ensuring that domestic hot water is distributed throughout
More informationPED Workshop Nicosia, 3-5 October, 2005
EU Trade Policy in the Pressure Equipment Sector An Industry Perspective PED Workshop Nicosia, 3-5 October, 2005 Frank Wohnsland VDMA German Engineering Federation Page 1 4 October 2005 Our platform We,
More information