The fixture emits an indirect, soft and symmetrical light. Reflections in the lattice create an attractive play of light within the fixture.

Size: px

Start display at page:

Download "The fixture emits an indirect, soft and symmetrical light. Reflections in the lattice create an attractive play of light within the fixture."

Dylan Parker
5 years ago
Views:

Design Bystrup Architects Concept The fixture emits an indirect, soft and symmetrical light. Reflections in the lattice create an attractive play of light within the fixture.

Mounting Post top: Mounted on round straight aluminum (RSA) pole. Weight Max. 18 lbs. Label culus, Wet Location.

1 Design Bystrup Architects Concept The fixture emits an indirect, soft and symmetrical light. Reflections in the lattice create an attractive play of light within the fixture. Finish Natural painted aluminum or graphite grey, powder coated. Material Top shade: Spun aluminum. Enclosure: Clear glass. Reflector: Anodized aluminum. Framework: Die cast aluminum. Mounting Post top: Mounted on round straight aluminum (RSA) pole. Weight Max. 18 lbs. Label culus, Wet Location. IBEW Product Code Light source Voltage Finish Transition to pole Features LP NEST 1/150W/CMH/T-6 G V GRAPH T-RSA-4.5" DIM 0-10V 1/70W/CMH/T-6 G12 NAT PAINT ALU NOT APPLICABLE 56W LED/3000K 56W LED/4000K Specification notes a. Dimming option is only available for 150W and for LED variants.

LED Controls Design Bystrup Arkitekter 29.5 10000113352 13 Light source Voltage Weight Electric shock protection Ingress protection 60 W LED 120-277V 18 Lbs Cl.

2 LED Controls Design Bystrup Arkitekter Light source Voltage Weight Electric shock protection Ingress protection 60 W LED V 18 Lbs Cl. I IP 66 Recommended cleaning substances: Wipe off dust wiht a dry, soft cloth. Remove greasy spots etc. with a soft cloth dampened in lukewarm water (<122 F/ 50 C) with a mild detergent. Warning: Scouring powder and similar substances will scratch surfaces. All installation is subject to local code and jurisdiction. Consult a qualified electrician to ensure correct branch circuit conductor. Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale, Florida

3 5 mm 4 mm /2 inch 3/8 inch Removed and discard set screws included in pole (3/8 inch) Green to Green (ground) - White to White (neutral) - Black to Black (line) - Grey to Grey (Dim-) - Violet to Violet (Dim+) 5 3x Grey and Violet only to be connected to a 0-10V dimming signal, otherwise cap them.

Terminal Post Design Jens Ammundsen, Vilhelm Lauritzen A/S & Jens Gudum, Jens Gudum ApS 10000113351 23.3 28.

Remove greasy spots etc. with a soft cloth dampe ned in lukewarm water (<122 F/ 50 C) with a mild detergent. Warning: Scouring powder and similar substances will scratch surfaces.

The installer must ensure that the foundation is stable and can support the luminiare s weight. The Installer must use proper means to secure the luminiare to the ground.

4 Terminal Post Design Jens Ammundsen, Vilhelm Lauritzen A/S & Jens Gudum, Jens Gudum ApS Light source Voltage Weight Electric shock protection Ingress protection 1/150W/CMH/T6-G V 22.1Lbs Cl. I IP 66 Recommended cleaning substances: Wipe off dust wiht a dry, soft cloth. Remove greasy spots etc. with a soft cloth dampe ned in lukewarm water (<122 F/ 50 C) with a mild detergent. Warning: Scouring powder and similar substances will scratch surfaces. All installation is subject to local code and jurisdiction. Consult a qualified electrician to ensure correct branch circuit conductor. The installer must ensure that the foundation is stable and can support the luminiare s weight. The Installer must use proper means to secure the luminiare to the ground. LP Nest Design Bystrup Arkitekter Light source 1x70W/CMH/T6-G12 1x150W/CMH/T6-G12 Voltage/frequency V Weight Electric shock protection Ingress protection 13.2 lbs Cl. I IP 66 Recommended cleaning substances: Wipe off dust wiht a dry, soft cloth. Remove greasy spots etc. with a soft cloth dampe ned in lukewarm water (<122 F/ 50 C) with a mild detergent. Warning: Scouring powder and similar substances will scratch surfaces. All installation is subject to local code and jurisdiction. Consult a qualified electrician to ensure correct branch circuit conductor. The installer must ensure that the ceiling can support the luminiare s weight. The installer must if necessary reinforce the ceiling structure by adequate means. Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale, Florida

5 Terminal Post A 1/2 inch 3/8 inch Removed and discard set screws included in pole (3/8 inch) Grey and Violet only to be connected to a 0-10V dimming signal, otherwise cap them. 5 - Green to Green (ground) - White to White (neutral) - Black to Black (line) - Grey to Grey (Dim-) - Violet to Violet (Dim+) Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale, Florida

6 LP Nest A 1/2 inch 3/8 inch Removed and discard set screws included in pole (3/8 inch) Grey and Violet only to be connected to a 0-10V dimming signal, otherwise cap them. 5 - Green to Green (ground) - White to White (neutral) - Black to Black (line) - Grey to Grey (Dim-) - Violet to Violet (Dim+) Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale, Florida

7 LED Design Bystrup Arkitekter I1 13 Light source Voltage Weight Electric shock protection Ingress protection LED V 18 Lbs Cl. I, Grounded IP 66 Wet location Recommended cleaning substances: Wipe off dust wiht a dry, soft cloth. Remove greasy spots etc. with a soft cloth dampened in lukewarm water (<122 F/ 50 C) with a mild detergent. Warning: Scouring powder and similar substances will scratch surfaces. All installation is subject to local code and jurisdiction. Consult a qualified electrician to ensure correct branch circuit conductor. Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale, Florida

8 5 mm I1 4 mm Red Black Red Black Black 1 - Black to Brown - Green to Green - White to Blue White 5 Green 1/2 inch 3/8 inch Removed and discard set screws included in pole (3/8 inch) Replace with 1/2 inch set screws included with fixture. 6 3x

Design Bystrup Arkitekter 29.5 50755-I1 13 Light source Voltage/frequency Weight Electric shock protection Ingress protection 1x70W/CMH/T6-G12 Max 120/277V 18 lbs Cl.

9 Design Bystrup Arkitekter I1 13 Light source Voltage/frequency Weight Electric shock protection Ingress protection 1x70W/CMH/T6-G12 Max 120/277V 18 lbs Cl. I Grounded IP 66 wet locations 1x150W/CMH/T6-G12 Recommended cleaning substances: Wipe off dust wiht a dry, soft cloth. Remove greasy spots etc. with a soft cloth dampened in lukewarm water (<122 F/ 50 C) with a mild detergent. Warning: Scouring powder and similar substances will scratch surfaces. All installation is subject to local code and jurisdiction. Consult a qualified electrician to ensure correct branch circuit conductor. The installer must ensure that the ceiling can support the luminiare s weight. The installer must if necessary reinforce the ceiling structure by adequate means. Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale, Florida

10 1/2 inch 3/8 inch Removed and discard set screws included in pole (3/8 inch) Replace with 1/2 inch set screws included with fixture I1

11 LP NEST-LED-DYNA Product description LP Nest Design Bystrup Architects Concept The fixture emits an indirect, soft and symmetrical light. Reflections in the lattice create an attractive play of light within the fixture. Finish Natural painted aluminum or graphite grey, powder coated. Material Top shade: Spun aluminum. Enclosure: Clear glass. Reflector: Anodized aluminum. Framework: Die cast aluminum. Mounting Post top: Mounted on round straight aluminum (RSA) pole. Weight Max. 18 lbs. Label culus, Wet Location. IBEW Product Code Light source Voltage Finish Electric shock protection cl. Options LPNEST-PT 1/150W/CMH/T-6 G V GRAPH NOT APPLICABLE DIMMING Specification notes 1/70W/CMH/T-6 G12 NAT PAINT ALU SURGE PROTECTOR DYNADIMMER 60W LED 3000K US 60W LED 4000K US Info notes NOT APPLICABLE a. CMH variants provided with one V electronic ballast to be mounted in the pole. I. For pole selection, refer to Pole page. b. LED variants provided with one V electronic driver to be mounted in the pole. II. The comparable EU version has the following classification: Ingress Protection Code: IP66. c. All LED wattages are system power. III. LED technology is rapidly changing. Specifications are based on present technology. For most up d. Dimming option is only available for 150W and for LED variants. to date specifications see e. Dynadimmer option is only available for 150W and for LED variants. IV. Dynadimmer will be programmed at the factory. Programming information required from the f. Dynadimmer provided with dimmable ballast (CMH variant) or dimmable driver (LED variant). customer is available in the specification sheets. V. For wireless control option, please consult factory Louis Poulsen Lighting 3260 Meridian Parkway FL PH: Fax: louispoulsen.com 1/3 yu

12 LP NEST-LED-DYNA Material description Louis Poulsen Lighting 3260 Meridian Parkway FL PH: Fax: louispoulsen.com 2/3

13 LP NEST-LED-DYNA Light Measurements Louis Poulsen Lighting 3260 Meridian Parkway FL PH: Fax: louispoulsen.com 3/3

14 LP NEST-LED-DIM Product description LP Nest Design Bystrup Architects Concept The fixture emits an indirect, soft and symmetrical light. Reflections in the lattice create an attractive play of light within the fixture. Finish Natural painted aluminum or graphite grey, powder coated. Material Top shade: Spun aluminum. Enclosure: Clear glass. Reflector: Anodized aluminum. Framework: Die cast aluminum. Mounting Post top: Mounted on round straight aluminum (RSA) pole. Weight Max. 18 lbs. Label culus, Wet Location. IBEW Product Code Light source Voltage Finish Electric shock protection cl. Options LPNEST-PT 1/150W/CMH/T-6 G V GRAPH NOT APPLICABLE DIMMING Specification notes 1/70W/CMH/T-6 G12 NAT PAINT ALU SURGE PROTECTOR DYNADIMMER 60W LED 3000K US 60W LED 4000K US Info notes NOT APPLICABLE a. CMH variants provided with one V electronic ballast to be mounted in the pole. I. For pole selection, refer to Pole page. b. LED variants provided with one V electronic driver to be mounted in the pole. II. The comparable EU version has the following classification: Ingress Protection Code: IP66. c. All LED wattages are system power. III. LED technology is rapidly changing. Specifications are based on present technology. For most up d. Dimming option is only available for 150W and for LED variants. to date specifications see e. Dynadimmer option is only available for 150W and for LED variants. IV. Dynadimmer will be programmed at the factory. Programming information required from the f. Dynadimmer provided with dimmable ballast (CMH variant) or dimmable driver (LED variant). customer is available in the specification sheets. V. For wireless control option, please consult factory Louis Poulsen Lighting 3260 Meridian Parkway FL PH: Fax: louispoulsen.com 1/3 yu

15 LP NEST-LED-DIM Material description Louis Poulsen Lighting 3260 Meridian Parkway FL PH: Fax: louispoulsen.com 2/3

16 LP NEST-LED-DIM Light Measurements Louis Poulsen Lighting 3260 Meridian Parkway FL PH: Fax: louispoulsen.com 3/3

17 LP NEST-LED Product description LP Nest Design Bystrup Architects Concept The fixture emits an indirect, soft and symmetrical light. Reflections in the lattice create an attractive play of light within the fixture. Finish Natural painted aluminum or graphite grey, powder coated. Material Top shade: Spun aluminum. Enclosure: Clear glass. Reflector: Anodized aluminum. Framework: Die cast aluminum. Mounting Post top: Mounted on round straight aluminum (RSA) pole. Weight Max. 18 lbs. Label culus, Wet Location. IBEW Product Code Light source Voltage Finish Electric shock protection cl. Options LPNEST-PT 1/150W/CMH/T-6 G V GRAPH NOT APPLICABLE DIMMING Specification notes 1/70W/CMH/T-6 G12 NAT PAINT ALU SURGE PROTECTOR DYNADIMMER 60W LED 3000K US 60W LED 4000K US Info notes NOT APPLICABLE a. CMH variants provided with one V electronic ballast to be mounted in the pole. I. For pole selection, refer to Pole page. b. LED variants provided with one V electronic driver to be mounted in the pole. II. The comparable EU version has the following classification: Ingress Protection Code: IP66. c. All LED wattages are system power. III. LED technology is rapidly changing. Specifications are based on present technology. For most up d. Dimming option is only available for 150W and for LED variants. to date specifications see e. Dynadimmer option is only available for 150W and for LED variants. IV. Dynadimmer will be programmed at the factory. Programming information required from the f. Dynadimmer provided with dimmable ballast (CMH variant) or dimmable driver (LED variant). customer is available in the specification sheets. V. For wireless control option, please consult factory Louis Poulsen Lighting 3260 Meridian Parkway FL PH: Fax: louispoulsen.com 1/3 yu

18 LP NEST-LED Material description Louis Poulsen Lighting 3260 Meridian Parkway FL PH: Fax: louispoulsen.com 2/3

19 LP NEST-LED Light Measurements Louis Poulsen Lighting 3260 Meridian Parkway FL PH: Fax: louispoulsen.com 3/3

20 LP NEST-CMH-DYNA Product description Weblink: 2549 Design: Bystrup Architects Light Concept: The fixture emits an indirect, soft and symmetrical light. Reflections in the lattice create an attractive play of light within the fixture. Finish: Natural painted aluminum or graphite grey, powder coated. Material: Top shade: Spun aluminum. Enclosure: Clear glass. Reflector: Anodized aluminum. Framework: Die cast aluminum. Mounting: Post top: Mounted on round straight aluminum (RSA) pole. Weight: Max. 18 lbs. Label: culus, Wet Location. IBEW Product code Light source Voltage Finish Electric shock protection cl. Transition to pole Options LPNEST-PT 60W LED/3000K 60W LED/4000K 1/70W/CMH/T-6 G12 1/150W/CMH/T-6 G V GRAPH NAT PAINT ALU SURGE PROTECTOR NOT APPLICABLE T-RSA-4.5" DYNADIMMER NOT APPLICABLE DIMMING a. CMH variants provided with one V electronic ballast to be mounted in the pole. b. LED variants provided with one V electronic driver to be mounted in the pole. c. All LED wattages are system power. d. Dimming option is only available for 150W and for LED variants. e. Dynadimmer option is only available for 150W and for LED variants. f. Dynadimmer provided with dimmable ballast (CMH variant) or dimmable driver (LED variant). I. For pole selection, refer to Pole page. II. The comparable EU version has the following classification: Ingress Protection Code: IP66. III. LED technology is rapidly changing. Specifications are based on present technology. For most up to date specifications see IV. Dynadimmer will be programmed at the factory. Programming information required from the customer is available in the specification sheets. V. For wireless control option, please consult factory Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale FL PH: Fax: louispoulsen.com 1/3

21 LP NEST-CMH-DYNA Material description Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale FL PH: Fax: louispoulsen.com 2/3

22 LP NEST-CMH-DYNA Light measurements Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale FL PH: Fax: louispoulsen.com 3/3

23 LP NEST-CMH-DIM Product description Weblink: 2549 Design: Bystrup Architects Light Concept: The fixture emits an indirect, soft and symmetrical light. Reflections in the lattice create an attractive play of light within the fixture. Finish: Natural painted aluminum or graphite grey, powder coated. Material: Top shade: Spun aluminum. Enclosure: Clear glass. Reflector: Anodized aluminum. Framework: Die cast aluminum. Mounting: Post top: Mounted on round straight aluminum (RSA) pole. Weight: Max. 18 lbs. Label: culus, Wet Location. IBEW Product code Light source Voltage Finish Electric shock protection cl. Transition to pole Options LPNEST-PT 60W LED/3000K 60W LED/4000K 1/70W/CMH/T-6 G12 1/150W/CMH/T-6 G V GRAPH NAT PAINT ALU SURGE PROTECTOR NOT APPLICABLE T-RSA-4.5" DYNADIMMER NOT APPLICABLE DIMMING a. CMH variants provided with one V electronic ballast to be mounted in the pole. b. LED variants provided with one V electronic driver to be mounted in the pole. c. All LED wattages are system power. d. Dimming option is only available for 150W and for LED variants. e. Dynadimmer option is only available for 150W and for LED variants. f. Dynadimmer provided with dimmable ballast (CMH variant) or dimmable driver (LED variant). I. For pole selection, refer to Pole page. II. The comparable EU version has the following classification: Ingress Protection Code: IP66. III. LED technology is rapidly changing. Specifications are based on present technology. For most up to date specifications see IV. Dynadimmer will be programmed at the factory. Programming information required from the customer is available in the specification sheets. V. For wireless control option, please consult factory Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale FL PH: Fax: louispoulsen.com 1/3

24 LP NEST-CMH-DIM Material description Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale FL PH: Fax: louispoulsen.com 2/3

25 LP NEST-CMH-DIM Light measurements Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale FL PH: Fax: louispoulsen.com 3/3

26 LP NEST-CMH Product description Weblink: 2549 Design: Bystrup Architects Light Concept: The fixture emits an indirect, soft and symmetrical light. Reflections in the lattice create an attractive play of light within the fixture. Finish: Natural painted aluminum or graphite grey, powder coated. Material: Top shade: Spun aluminum. Enclosure: Clear glass. Reflector: Anodized aluminum. Framework: Die cast aluminum. Mounting: Post top: Mounted on round straight aluminum (RSA) pole. Weight: Max. 18 lbs. Label: culus, Wet Location. IBEW Product code Light source Voltage Finish Electric shock protection cl. Transition to pole Options LPNEST-PT 60W LED/3000K 60W LED/4000K 1/70W/CMH/T-6 G12 1/150W/CMH/T-6 G V GRAPH NAT PAINT ALU SURGE PROTECTOR NOT APPLICABLE T-RSA-4.5" DYNADIMMER NOT APPLICABLE DIMMING a. CMH variants provided with one V electronic ballast to be mounted in the pole. b. LED variants provided with one V electronic driver to be mounted in the pole. c. All LED wattages are system power. d. Dimming option is only available for 150W and for LED variants. e. Dynadimmer option is only available for 150W and for LED variants. f. Dynadimmer provided with dimmable ballast (CMH variant) or dimmable driver (LED variant). I. For pole selection, refer to Pole page. II. The comparable EU version has the following classification: Ingress Protection Code: IP66. III. LED technology is rapidly changing. Specifications are based on present technology. For most up to date specifications see IV. Dynadimmer will be programmed at the factory. Programming information required from the customer is available in the specification sheets. V. For wireless control option, please consult factory Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale FL PH: Fax: louispoulsen.com 1/3

27 LP NEST-CMH Material description Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale FL PH: Fax: louispoulsen.com 2/3

28 LP NEST-CMH Light measurements Louis Poulsen Lighting 3260 Meridian Parkway Fort Lauderdale FL PH: Fax: louispoulsen.com 3/3

Icon. see your environment in a new light. Design: Mads Odgård

Icon. see your environment in a new light. Design: Mads Odgård Icon see your environment in a new light Design: Mads Odgård 2 The Wilshire Vermont Station Apartments, Los Angeles, CA. A: Arquitectonica. LD: Kaplan Gehring McCarroll Architectural Lighting. P: Henri