PRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LK-004
|
|
- Ellen Quinn
- 5 years ago
- Views:
Transcription
1 Reg. št. / Ref..: / Datum izdaje / Issued on: 21. december 2017 Zamenjuje izdajo z dne / Replaces Annex dated: 10. november 2016 Veljavnost akreditacije je mogoče preveriti na spletni strani SA,. Information on current accreditation status is available at the SA website,. PRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LK AKREDITIRANI ORGAN / Accredited body SIJ Ravne Systems d.o.o. Koroška cesta 14, 2390 Ravne na Koroškem 2 STANDARD SIST EN ISO/IEC 17025: OBSEG AKREDITACIJE / Scope of accreditation V okviru te akreditacijske listine Slovenska akreditacija priznava akreditiranemu organu usposobljenost za opravljanje naslednjih dejavnosti: / SA hereby acknowledges the accredited body as being competent for performing the following activities: 3.1 Skrajšani opis obsega akreditacije / A short description of the scope Kalibriranje na naslednjih področjih in naštetih pod-področjih (Calibration in the following fields and the specified sub-fields): o Dimenzionalne veličine / Dimensional Quantities: Dolžina / Length (L): merila dolžine, črtna merila, instrumenti za merjenje dolžine, premer, odstopek oblike, hrapavost, navojne veličine, koordinatne merilne naprave, etaloni za velikost delcev / Length gauges, Ruler displacement, Length measuring instruments, Diameter, Form error, Roughness, Thread quantities, Co-ordinate measuring machines, Standards for particle size; Kot / Angle: merila kota, merilniki nagiba / Angle gauges, Clinometers; o Elektrika / Electricity OB05-32 Izdaja 7 Stran 1 od 22
2 Električne veličine in visokofrekvenčne (VF) veličine / Electric quantities and High Frequency (HF) Quantities o Čas in frekvenca / Time and Frequency Čas / Time Frekvenca / Frequency o Mehanske veličine / Mechanical Quantities: Sila / Force: Merilni sistemi za silo, pretvorniki sile (natezno, tlačno) / Force measuring systems, Force transducers (tension and compression forces); Tehtnice / Weighing instruments: Neavtomatske tehtnice / n-automatic weighing instruments (NAWI); Tlak / Pressure: Manometri za industrijsko uporabo / Manometers for industrial application; Moment sile / Torque: Pretvorniki momenta, momentni ključi, naprava za preverjanje momentnih ključev / Torque transducers, Torque wrenches Mehanska energija / Mechanical energy: Merilniki udarne žilavosti / Pendulum impact-testing machines Merilniki trdote / Hardness testing machines: Brinell, Vickers, Rockwell, Shore; o Fluidne veličine / Fluid quantities: Prostornina tekočin / Volume of Liquids (Porozimetri / porosimeters); o Temperatura, vlaga in termofizikalne lastnosti / Temperature, humidity and thermo-physical properties: Tekočinski termometri / Liquid in-glass thermometers; Indikacijski termometri / Thermometers with indicators; OB05-32 Izdaja 7 Stran 2 od 22
3 3.2 Podrobni opis obsega akreditacije / Detailed scope of accreditation Kalibracijski laboratorij, Koroška cesta 14, 2390 Ravne na Koroškem Tabela / Table 1 kalibracije v laboratoriju / in-lab calibrations DIMENZIONALNE VELIČINE / Dimensional Quantities Dolžina / Length (L) Merila dolžine Length gauges Mejna vzporedna dolžinska merila - merilne kladice Gauge blocks L = merjena dolžina / length of the gauge block kalibracijskem postopku QNCL103 QNCL (0,5 do/to 100) mm 0,05 µm + 2, L - Jeklene merilne kladice - Steel gauge blocks 2. (0,5 do/to 100) mm 0,06 µm + 2, L - Keramične merilne kladice, merilne kladice iz karbidne trdine - Ceramic gauge blocks, tunsten carbide gauge blocks 3. Naprave za kalibracijo mejnih vzporednih dolžinskih meril Gauge block comparators Mejna vzporedna merila merilne kladice in palice Gauge blocks and gauge bars (steel) (0 do/to 100) mm 0,035 µm + 0,002 D kalibracijskem postopku QNCL124 - D= razlika med etaloni v <µm> QNCL124 - measured difference D in <µm> 4. (0 do/to 600) mm 0,4 µm + 2, L kalibracijskem postopku QNCL104 QNCL (0 do/to 1200) mm 0,6 µm + 2, L 6. (1200 do/to 3000) mm 0,8 µm + 3, L kalibracijskem postopku QNCL104a QNCL104a 7. Stopničasta merila Step gauges Merilne urice Dial gauges (0 do/to 750) mm 2,0 µm + 4, L kalibracijskem postopku QNCL127 QNCL127 kalibracijskem postopku QNCL126 QNCL (0 do/to 100) mm 3,0 µm + 3, L Ločljivost 0,01 mm / resolution 0,01 mm 9. (0 do/to 100) mm 0,5 µm + 3, L Ločljivost 1 µm / resolution 1 µm OB05-32 Izdaja 7 Stran 3 od 22
4 10. Vzvodne merilne urice za zunanje in notranje utore ter luknje. Dial gauges for outside and inside measurement. 11. Naprave za kalibracijo merilnih uric Dial gauge testers Induktivna in inkrementalna tipala Inductive and incremental probes (0 do/to 100) mm 3,0 µm L kalibracijskem postopku QNCL166 QNCL166 (0 do/to 100) mm 0,1 µm + 2, L kalibracijskem postopku QNCL122, QNCL122a QNCL122, QNCL122a kalibracijskem postopku QNCL131 QNCL (0 do/to 2 ) mm 0,15 µm 13. (2 do/to 100 ) mm 0,3 µm + 4, L Debelinska merila Thickness gauges kalibracijskem postopku QNCL138 QNCL (0 do/to 100 ) mm 1 µm L 15. (100 do/to 1000 ) mm 2 µm L 16. Merilniki profila pnevmatik Tyre profile depth gauge 17. Volanski kotomeri Steering wheel protractor 18. Merilniki debeline Thickness gauges 19. Merilniki debeline nanosa Coating thickness gauges 20. Ultrazvočni merilniki debeline Ultrasonic thickness gauges (0 do/to 100 ) mm 0,025 mm L kalibracijskem postopku QNCL139 QNCL139 (30 do/to 180) º 0,3 º kalibracijskem postopku QNCL137 QNCL137 (0 do/to 100) mm 2,0 µm L kalibracijskem postopku QNCL151 QNCL151 (0 do/to 2 ) mm 1,5 µm kalibracijskem postopku QNCL156 QNCL156 (0 do/to 100) mm 20 µm + 1, L kalibracijskem postopku QNCL165 QNCL165 Črtna merila / Ruler displacement Toga črtna merila Rulers kalibracijskem postopku QNCL130, QNCL130a QNCL130, QNCL130a 21. (0 do/to 250) mm 0,6 µm + 2, L 22. (250 do/to 3000) mm 20 µm L OB05-32 Izdaja 7 Stran 4 od 22
5 23. Tračna merila Tape measures 24. Teleskopski metri / Telescopic measuring rods (0 do/to 100) m 20 µm L kalibracijskem postopku QNCL114 QNCL114 (0 do/to 10000) mm 0,3 mm + 2, L kalibracijskem postopku QNCL167 QNCL167 Instrumenti za merjenje dolžine / Length measuring instruments Železniška merila - merila za širino in naddvižek tira / Railway length gauges - track and cant gauge kalibracijskem postopku QNCL136 QNCL Širina Width 26. Naddvižek tira Track and cant 27. Ravnost Flatness 28. Dvotočkovni mikrometri (zunanji) 2 point micrometers (external) 29. Dvotočkovni mikrometri (notranji) 2 point micrometers (internal) Pomična merila Vernier calliper gauges (0 do/to 1435) mm 0,2 mm (-30 do/to 200) mm 0,5 mm 0,1 mm (0 do/to 1000) mm 1,6 µm L kalibracijskem postopku QNCL110 QNCL110 (25 do/to 2000) mm 1,6 µm L kalibracijskem postopku QNCL110 QNCL110 kalibracijskem postopku QNCL109 QNCL (0 do/to 1000) mm 10 µm L 31. (1000 do/to 2000) mm 25 µm L 32. Merilne naprave za merjenje dolžin pri strojih za merjenje mehanskih lastnosti materialov Extensometers in uniaxial testing 33. Merilna kolesa s števcem Measuring wheels with counter Laserski merilniki razdalje Laser distance meters (0 do/to 100) mm 0,5 µm + 1, L kalibracijskem postopku QNCL145 QNCL145 (0 do/to 1000) m 8 mm + 1, L kalibracijskem postopku QNCL158 QNCL158 kalibracijskem postopku QNCL159 QNCL (0 do/to 10) m 0,15 mm L Ločljivost 0,1 mm / resolution 0,1 mm 35. Višinska merila Height gauge (0 do/to 1000) mm 0,6 µm + 1, L kalibracijskem postopku QNCL109a QNCL109a Premer / Diameter OB05-32 Izdaja 7 Stran 5 od 22
6 36. Trni, gladki Plain plug gauges (0 do/to 200) mm 0,6 µm + 5, L kalibracijskem postopku QNCL106 QNCL106 Obroči, gladki / Plain plug gauges 37. (2 do/to 10) mm 0,7 µm L -Neposredna kalibracija po internem kalibracijskem postopku QNCL105a -Direct calibration according to internal QNCL105a 38. (10 do/to 300) mm 0,6 µm + 5, L kalibracijskem postopku QNCL105 QNCL Tritočkovni mikrometri 3 point micrometers (2 do/to 300) mm 1,6 µm L kalibracijskem postopku QNCL110 QNCL110 Odstopek oblike / Form error Merilne plošče Surface plates kalibracijskem postopku QNCL116 QNCL m x 4 m 1,8 µm L x 500 mm Premera / diameter 2,5 µm 42. Lasasta ravnila Knife edge straight edges 43. Ploska ravnila Straight edges 44. Obroči in trni (okroglost) Ring and plug gauges (roundness) 45. Merilniki okroglosti Roundness measuring machine (0 do/to 600) mm 1,5 µm kalibracijskem postopku QNCL152 QNCL152 (0 do/to 2000) mm 5,4 µm kalibracijskem postopku QNCL154 QNCL154 (5 do/to 200) mm 0,15 µm kalibracijskem postopku QNCL161 QNCL161 (0 do/to 275) mm 0,08 µm kalibracijskem postopku QNCL162. QNCL162. Hrapavost / Roughness 46. Vzorci hrapavosti Roughness specimen 47. Tipalni instrumenti za merjenje hrapavosti Stylus instruments for roughness measurements (0,05 do/to 3) µm 0,01 µm R a kalibracijskem postopku QNCL128 QNCL128 - Parameter R a (0,05 do/to 3) µm 0,01 µm R a kalibracijskem postopku QNCL129 QNCL129 - Parameter R a Navojne veličine / Thread quantities OB05-32 Izdaja 7 Stran 6 od 22
7 Navojni kalibrski trni / Screw plug gauges: kalibracijskem postopku QNCL108 - Merila: valjasti QNCL108 - Measures: Cylindrical 48. Korak Pitch 49. Bočni kot Thread angle 50. Srednji premer Simple pitch diameter Navojni kalibrski obroči / Screw ring gauges: 51. Korak Pitch 52. Bočni kot Thread angle 53. Srednji premer Simple pitch diameter (0,25 do/to 6,5) mm 0,8 µm (30 do/to 60) º α=bočni kot (po EA-10/10, metoda 1a) / α=thread angle, according to EA-10/10, method 1a (1 do/to 200) mm α= 30º : 6,0 µm L α= 55º : 3,5 µm L α= 60º : 3,5 µm L (0,25 do/to 6,5) mm 0,8 µm kalibracijskem postopku QNCL107, QNCL107a QNCL107, QNCL107a (55 do/to 60) º α=bočni kot (po EA-10/10, metoda 1a) / α=thread angle, according to EA-10/10, method 1a (3 do/to 100) mm α= 55º : 3,5 µm L α= 60º : 3,5 µm L Koordinatne merilne naprave I Co-ordinate measuring machines 1D merilne naprave 1D measuring machines (po osi/ per axis) kalibracijskem postopku QNCL118, QNCL 120, QNCL 121. QNCL118, QNCL 120, QNCL (0 do/to 100) mm 0,3 µm L 55. (100 do/to 1200) mm 0,5 µm L 2D merilne naprave 2D measuring machines (po osi/ per axis) kalibracijskem postopku QNCL117, QNCL 119. QNCL117, QNCL (0 do/to 300) mm 1,1 µm L Pravokotnost Squareness: 3 " OB05-32 Izdaja 7 Stran 7 od 22
8 57. Merilni sistemi za merjenje točnosti linearnega pozicioniranja in ponovljivosti osi na obdelovalnih in merilnih strojih Measuring systems for measuring linear positioning accuracy and repeatability of axes in machine tools and measuring machines (0 do/to 40) m 3 µm + 1, L kalibracijskem postopku QNCL160. QNCL160. Etaloni za velikost delcev / Standards for particle size 58. Preskusna sita Test sieves (0 do/to 400) mm 3,2 µm L kalibracijskem postopku QNCL146. QNCL146. Kot / Angle Merila kota / Angle gauges 59. Kotniki 90 Squares 90 (0 do/to 600) mm 3,0 µm kalibracijskem postopku QNCL111. QNCL Kotomeri Protractors (0 do/to 360) º 2,5 ' kalibracijskem postopku QNCL140. QNCL Cilindrični kotniki 90 Cylindrical squares 90 (0 do/to 1000) mm 3,0 µm kalibracijskem postopku QNCL112. QNCL Sinusna ravnila Sine bars (0 do/to 700) mm Dolžina / Length: 4,0 µm Ravnost / Flatness: 1,0 µm Vzporednost / Parallelism: 3,0 µm kalibracijskem postopku QNCL113. QNCL113. Merilniki nagiba / Clinometers 63. (0 do/to 1000) mm 5 µm/m kalibracijskem postopku QNCL115. QNCL115. ELEKTRIKA / Electricity Električne veličine in visokofrekvenčne (VF) veličine / Electric quantities and High Frequency (HF) Quantities Ultrazvočni aparati za preiskavo materiala Ultrasonic instruments for material examination Metoda kalibracije skladna s SIST EN :2011 točki in 9, interni postopek QNCL170 -Calibration according to SIST EN :2011 paragraph and 9, internal procedure QNCL170 OB05-32 Izdaja 7 Stran 8 od 22
9 64. Stabilnost po času ogrevanja: amplitude signala položaja signala 0,8 % amplitude signala 0,2 % položaja signala Trepetanje prikaza: amplitude signala položaja signala 0,8 % amplitude signala 0,2 % položaja signala 66. Stabilnost pri spreminjanju napajalne napetosti: amplitude signala položaja signala 0,8 % amplitude signala 0,2 % položaja signala 67. Oddajni impulz - napetost V 50: (-1000 do/to 1000) V(DC) 68. Ekvivalentni vhodni šum N in: (0 do/to 1) V/Hz^0,5 69. Iznihavanje oddajnega impulza V r: amplitude signala 70. Nastavitev slabljenja: (0 do/to 110) db 4 % Glede na izmerjeno vrednost 10 % Glede na izračunano vrednost 1 % amplitude signala 0,3 db Glede na izmerjeno vrednost 71. Linearnost vertikalne skale: amplitude signala 1 % amplitude signala 72. Linearnost časovne baze: položaja signala 0,2 % položaja signala ČAS IN FREKVENCA / Time and Frequency Čas / Time Ultrazvočni aparati za preiskavo materiala Ultrasonic instruments for material examination Metoda kalibracije skladna s SIST EN :2011 točki in 9, interni postopek QNCL170 -Calibration according to SIST EN :2011 paragraph and 9, internal procedure QNCL Oddajni impulz - meritev časa vzpona impulza t r: (0,003 do/to 10) µs 9 % Glede na izmerjeno vrednost OB05-32 Izdaja 7 Stran 9 od 22
10 74. Oddajni impulz - meritev časa trajanja impulza t d: (0,003 do/to 10) µs 3 % Glede na izmerjeno vrednost Frekvenca / Frequency Ultrazvočni aparati za preiskavo materiala Ultrasonic instruments for material examination Metoda kalibracije skladna s SIST EN :2011 točki in 9, interni postopek QNCL170 -Calibration according to SIST EN :2011 paragraph and 9, internal procedure QNCL Sprejemnik meritev frekvenčnega območja (0 do/to 100) MHz 4,0 % Glede na izračunano vrednost MEHANSKE VELIČINE / Mechanical Quantities Sila / Force Pretvorniki sile (natezno, tlačno) Force transducers (tension and compression forces) kalibracijskem postopku QNCL147, QNCL147a QNCL147, QNCL147a 76. (10 do/to 1000) N 0,2 % - Z referenčnimi utežmi - With reference weights 77. (0,001 do/to 100) kn 0,25 % - Z referenčnimi električnimi pretvorniki sile - With reference force transducers Merilniki trdote / Hardness testing machines 78. Merilnik trdote kovin po Brinellu Brinell hardness testing machine HB 1,5 % - Posredna in neposredna metoda kalibracije skladna s SIST EN ISO :2014, interni postopek QNCL148, QNCL148a - Indirect and direct calibration according to SIST EN ISO :2014, internal procedure QNCL148, QNCL148a 79. Merilnik trdote kovin po Vickersu Vickers hardness testing machine HV 1,5 % - Posredna in neposredna metoda kalibracije skladna s SIST EN ISO :2006, interni postopek QNCL150, QNCL150a - Indirect and direct calibration according to SIST EN ISO :2006 internal procedure QNCL150, QNCL150a Merilnik trdote kovin po Rockwellu Rockwell hardness testing machine - Posredna in neposredna metoda kalibracije skladna s SIST EN ISO :2015, interni postopek QNCL149, QNCL149a - Indirect and direct calibration according to SIST EN ISO :2015 internal procedure QNCL149, QNCL149a HRA 1,2 HRA HRB 1,8 HRB HRC 1,2 HRC OB05-32 Izdaja 7 Stran 10 od 22
11 83. Merilnik trdote po Shore Shore hardness testing machine 10 Shore do/to 100 Shore 0,6 Shore (Shore A in Shore D) - metoda kalibracije po ISO 18898:2012, interni postopek QNCL calibration according to ISO 18898:2012, internal procedure QNCL157. Tehtnice / Weighing instruments Neavtomatske tehtnice / n-automatic weighing instruments - Metoda kalibracije skladna z EURAMET/cg-18/v4.0, interni postopek QNCL Calibration according to EURAMET/cg-18/v4.0, internal procedure QNCL m 1 g 0,05 mg g < m 2 g 0,07 mg g < m 3 g 0,12 mg g < m 4 g 0,14 mg g < m 5 g 0,20 mg g < m 10 g 0,17 mg g < m 20 g 0,15 mg g < m 50 g 0,17 mg g < m 100 g 0,28 mg g < m 150 g 0,45 mg g < m 200 g 0,50 mg g < m 220 g 0,65 mg g < m 250 g 0,67 mg g < m 300 g 0,78 mg g < m 400 g 1,00 mg g < m 500 g 1,50 mg g < m 600 g 1,75 mg g < m 1000 g 2,70 mg kg < m 2 kg 5,50 mg kg < m 200 kg 10-4 m Tlak / Pressure OB05-32 Izdaja 7 Stran 11 od 22
12 Manometri za industrijsko uporabo / Manometers for industrial application kalibracijskem postopku QNCL135. QNCL Merilni instrumenti: mehanski, elektronski. - Measuring instruments: mechanical, electronical. : medij: plin, tekočina, : medium: gas, fluid (-1 do/to 600) bar 0,16 %; ne manj kot 1 mbar 105. (600 do/to 1000) bar 0,60 % Moment sile / Torque Pretvorniki momenta / Torque transducers - Metoda kalibracije skladna z EURAMET/cg-14/v2.0, interni postopek QNCL Calibration according to EURAMET/cg-14/v2.0, internal procedure QNCL132. : desno / levo, : Clockwise / anticlockwise (20 do/to 1000) Nm 0,20 % Momentni ključi /Torque wrenches - Metoda kalibracijeskladna z ISO 6789:2003 interni postopek QNCL Calibration according to ISO 6789:2003 internal procedure QNCL133. : desno / levo, : Clockwise / anticlockwise (0,4 do/to 5) Nm 1,5 % 108. (5 do/to 1500) Nm 0,8 % Naprava za preverjanje momentnih ključev / Device for testing torque wrenches - Metoda kalibracije skadna z EURAMET/cg-14/v.02, interni postopek QNCL164 - Calibration according to EURAMET/cg- 14/v.02, internal procedure QNCL164 : levo / desno : clockwise / anticlockwise (0,4 do/to 1000) Nm 0,8 % FLUIDNE VELIČINE / Fluid Quantities Prostornina tekočin / Volume of Liquids 110. Porozimetri Porosimeters (0 do/to 10) l 0,1 % - Metoda kalibracije skladna z ASTM C231/C231M-10, Annex A1 točka A1.9, interni postopek QNCL Calibration according to ASTM C231/C231M-10, Annex A1 item A1.9 internal procedure QNCL153. : samo porozimetri tipa B, Remarks: B type porosimeters only. TEMPERATURA, VLAGA IN TERMOFIZIKALNE LASTNOSTI / Temperature, humidity and thermo-physical properties OB05-32 Izdaja 7 Stran 12 od 22
13 Tekočinski termometri / Liquid-in-glass thermometers - Primerjalna meritev v po internem kalibracijskem postopku QNCL Calibration by comparison according to internal QNCL (-20 do/to 140) C 0,08 C Indikacijski termometri / Thermometers with indicators - Primerjalna meritev v po internem kalibracijskem postopku QNCL Calibration by comparison according to internal QNCL (-20 do/to 140) C 0,08 C OB05-32 Izdaja 7 Stran 13 od 22
14 Tabela / Table 2 kalibracije na terenu (pri stranki) / on-site (at customer location) DIMENZIONALNE VELIČINE / Dimensional Quantities Dolžina / Length (L) Merila dolžine Length gauges L = merjena dolžina / length of the gauge block 113. Naprave za kalibracijo mejnih vzporednih dolžinskih meril Gauge block comparators Merilne urice Dial gauges (0 do/to 100) mm 0,035 µm + 0,002 D kalibracijskem postopku QNCL124 - D= razlika med etaloni v <µm> QNCL124 - measured difference D in <µm> kalibracijskem postopku QNCL126 QNCL (0 do/to 100) mm 3,0 µm + 2, L Ločljivost 0,01 mm / resolution 0,01 mm 115. (0 do/to 100) mm 0,5 µm + 2, L Ločljivost 1 µm / resolution 1 µm 116. Vzvodne merilne urice za zunanje in notranje utore ter luknje. Dial gauges for outside and inside measurement Naprave za kalibracijo merilnih uric Dial gauge testers Induktivna in inkrementalna tipala Inductive and incremental probes (0 do/to 100) mm 3,0 µm L kalibracijskem postopku QNCL166 QNCL166 (0 do/to 100) mm 0,1 µm + 2, L kalibracijskem postopku QNCL122, QNCL122a QNCL122, QNCL122a kalibracijskem postopku QNCL131 QNCL (0 do/to 2 ) mm 0,15 µm 119. (2 do/to 100 ) mm 0,3 µm + 4, L Debelinska merila Thickness gauges kalibracijskem postopku QNCL138 QNCL (0 do/to 100 ) mm 1 µm L 121. (100 do/to 1000 ) mm 2 µm L 122. Merilniki profila pnevmatik Tyre profile depth gauge 123. Merilniki debeline Thickness gauges (0 do/to 100 ) mm 0,025 mm L kalibracijskem postopku QNCL139 QNCL139 (0 do/to 100) mm 2,0 µm L kalibracijskem postopku QNCL151 QNCL151 OB05-32 Izdaja 7 Stran 14 od 22
15 124. Ultrazvočni merilniki debeline Ultrasonic thickness gauges (0 do/to 100) mm 20 µm + 1, L kalibracijskem postopku QNCL165 QNCL165 Instrumenti za merjenje dolžine / Length measuring instruments 125. Dvotočkovni mikrometri (zunanji) 2 point micrometers (external) 126. Dvotočkovni mikrometri (notranji) 2 point micrometers (internal) 127. Pomična merila Vernier calliper gauges 128. Merilne naprave za merjenje dolžin pri strojih za merjenje mehanskih lastnosti materialov Extensometers in uniaxial testing 129. Višinska merila Height gauge (0 do/to 1000) mm 1,6 µm L kalibracijskem postopku QNCL110 QNCL110 (25 do/to 2000) mm 1,6 µm L kalibracijskem postopku QNCL110 QNCL110 (0 do/to 1000) mm 10 µm L kalibracijskem postopku QNCL109 QNCL109 (0 do/to 100) mm 0,5 µm + 1, L kalibracijskem postopku QNCL145 QNCL145 (0 do/to 1000) mm 0,6 µm + 1, L kalibracijskem postopku QNCL109a QNCL109a Premer / Diameter 130. Tritočkovni mikrometri 3 point micrometers (2 do/to 300) mm 1,6 µm L kalibracijskem postopku QNCL110 QNCL110 Odstopek oblike / Form error 131. Merilne plošče Surface plates 132. Lasasta ravnila Knife edge straight edges 133. Ploska ravnila Straight edges 134. Merilniki okroglosti Roundness measuring machine 4 m x 4 m 1,8 µm L kalibracijskem postopku QNCL116 QNCL116 (0 do/to 600) mm 1,5 µm kalibracijskem postopku QNCL152 QNCL152 (0 do/to 2000) mm 5,4 µm kalibracijskem postopku QNCL154 QNCL154 (0 do/to 275) mm 0,08 µm kalibracijskem postopku QNCL162. QNCL162. Hrapavost / Roughness 135. Tipalni instrumenti za merjenje hrapavosti Stylus instruments for roughness measurements (0,05 do/to 3) µm 0,01 µm R a kalibracijskem postopku QNCL129 QNCL129 - Parameter R a OB05-32 Izdaja 7 Stran 15 od 22
16 Koordinatne merilne naprave I Co-ordinate measuring machines 1D merilne naprave 1D measuring machines (po osi/ per axis) kalibracijskem postopku QNCL118, QNCL 120, QNCL 121. QNCL118, QNCL 120, QNCL (0 do/to 100) mm 0,3 µm L 137. (100 do/to 1200) mm 0,5 µm L 2D merilne naprave 2D measuring machines (po osi/ per axis) kalibracijskem postopku QNCL117, QNCL 119. QNCL117, QNCL (0 do/to 300) mm 1,1 µm L Pravokotnost Squareness: 3 " 139. Merilni sistemi za merjenje točnosti linearnega pozicioniranja in ponovljivosti osi na obdelovalnih in merilnih strojih Measuring systems for measuring linear positioning accuracy and repeatability of axes in machine tools and measuring machines (0 do/to 40) m 3 µm + 1, L kalibracijskem postopku QNCL160. QNCL160. ELEKTRIKA / Electricity Električne veličine in visokofrekvenčne (VF) veličine / Electric quantities and High Frequency (HF) Quantities Ultrazvočni aparati za preiskavo materiala Ultrasonic instruments for material examination Metoda kalibracije skladna s SIST EN :2011 točki in 9, interni postopek QNCL170 -Calibration according to SIST EN :2011 paragraph and 9, internal procedure QNCL Stabilnost po času ogrevanja: amplitude signala položaja signala 0,8 % amplitude signala 0,2 % položaja signala Trepetanje prikaza: amplitude signala položaja signala 0,8 % amplitude signala 0,2 % položaja signala OB05-32 Izdaja 7 Stran 16 od 22
17 142. Stabilnost pri spreminjanju napajalne napetosti: amplitude signala položaja signala 0,8 % amplitude signala 0,2 % položaja signala 143. Oddajni impulz - napetost V 50: (-1000 do/to 1000) V(DC) 144. Ekvivalentni vhodni šum N in: (0 do/to 1) V/Hz^0, Iznihavanje oddajnega impulza V r: amplitude signala 146. Nastavitev slabljenja: (0 do/to 110) db 4 % Glede na izmerjeno vrednost 10 % Glede na izračunano vrednost 1 % amplitude signala 0,3 db Glede na izmerjeno vrednost 147. Linearnost vertikalne skale: amplitude signala 1 % amplitude signala 148. Linearnost časovne baze: položaja signala 0,2 % položaja signala ČAS IN FREKVENCA / Time and Frequency Čas / Time Ultrazvočni aparati za preiskavo materiala Ultrasonic instruments for material examination Metoda kalibracije skladna s SIST EN :2011 točki in 9, interni postopek QNCL170 -Calibration according to SIST EN :2011 paragraph and 9, internal procedure QNCL Oddajni impulz - meritev časa vzpona impulza t r: (0,003 do/to 10) µs 150. Oddajni impulz - meritev časa trajanja impulza t d: (0,003 do/to 10) µs 9 % Glede na izmerjeno vrednost 3 % Glede na izmerjeno vrednost Frekvenca / Frequency OB05-32 Izdaja 7 Stran 17 od 22
18 Ultrazvočni aparati za preiskavo materiala Ultrasonic instruments for material examination Metoda kalibracije skladna s SIST EN :2011 točki in 9, interni postopek QNCL170 -Calibration according to SIST EN :2011 paragraph and 9, internal procedure QNCL Sprejemnik meritev frekvenčnega območja (0 do/to 100) MHz 4,0 % Glede na izračunano vrednost MEHANSKE VELIČINE / Mechanical Quantities Sila / Force Merilni sistemi za silo Force measuring systems - Kovinski material po ISO :2016; - Metallic materials according ISO :2016 kalibracijskem postopku QNCL134 QNCL134 - Betonske stiskalnice po EN :2000 skupaj z ISO : Testing machine for concrete according EN together with ISO :2016 kalibracijskem postopku QNCL155 QNCL N do/to 500 kn 0,2 % 153. (0,5 do/to 5) MN 0,75 % Pretvorniki sile (natezno, tlačno) Force transducers (tension and compression forces) kalibracijskem postopku QNCL147, QNCL147a. QNCL147, QNCL147a (10 do/to 1000) N 0,2 % - Z referenčnimi utežmi - With reference weights Merilniki trdote / Hardness testing machines 155. Merilnik trdote kovin po Brinellu Brinell hardness testing machine HB 1,5 % - Posredna in neposredna metoda kalibracije skladna s SIST EN ISO :2014, interni postopek QNCL148, QNCL148a. - Indirect and direct calibration according to SIST EN ISO :2014, internal procedure QNCL148, QNCL148a. OB05-32 Izdaja 7 Stran 18 od 22
19 156. Merilnik trdote kovin po Vickersu Vickers hardness testing machine Merilnik trdote kovin po Rockwellu Rockwell hardness testing machine HV 1,5 % - Posredna in neposredna metoda kalibracije skladna s SIST EN ISO :2006, interni postopek QNCL150, QNCL150a. - Indirect and direct calibration according to SIST EN ISO :2006, internal procedure QNCL150, QNCL150a. - Posredna in neposredna metoda kalibracije skladna s SIST EN ISO :2015, interni postopek QNCL149, QNCL149a. - Indirect and direct calibration according to SIST EN ISO :2015, internal procedure QNCL149, QNCL149a HRA 1,2 HRA HRB 1,8 HRB HRC 1,2 HRC 160. Merilnik trdote po Shore Shore hardness testing machine 10 Shore do/to 100 Shore 0,6 Shore (Shore A in Shore D) - Metoda kalibracije po ISO 18898:2012, interni postopek QNCL Calibration according to ISO 18898:2012, internal procedure QNCL157. Tehtnice / Weighing instruments Neavtomatske tehtnice / n-automatic weighing instruments - Metoda kalibracije skladna z EURAMET/cg-18/v4.0, interni postopek QNCL Calibration according to EURAMET/cg-18/v4.0, internal procedure QNCL m 1 g 0,05 mg g < m 2 g 0,07 mg g < m 3 g 0,12 mg g < m 4 g 0,14 mg g < m 5 g 0,20 mg g < m 10 g 0,17 mg g < m 20 g 0,15 mg g < m 50 g 0,17 mg g < m 100 g 0,28 mg g < m 150 g 0,45 mg g < m 200 g 0,50 mg g < m 220 g 0,65 mg g < m 250 g 0,67 mg OB05-32 Izdaja 7 Stran 19 od 22
20 g < m 300 g 0,78 mg g < m 400 g 1,00 mg g < m 500 g 1,50 mg g < m 600 g 1,75 mg g < m 1000 g 2,70 mg kg < m 2 kg 5,50 mg kg < m 200 kg 10-4 m Tlak / Pressure Manometri za industrijsko uporabo / Manometers for industrial application kalibracijskem postopku QNCL135. QNCL Merilni instrumenti: mehanski, elektronski. - Measuring instruments: mechanical, electronical. : medij: plin, tekočina, : medium: gas, fluid (-1 do/to 600) bar 0,16 %; ne manj kot 1 mbar 182. (600 do/to 1000) bar 0,60 % Moment sile / Torque Momentni ključi /Torque wrenches - Metoda kalibracije skladna z ISO 6789:2003 interni postopek QNCL Calibration according to ISO 6789:2003 internal procedure QNCL133. : desno / levo, : Clockwise / anticlockwise (0,4 do/to 5) Nm 1,5 % 184. (5 do/to 1500) Nm 0,8 % Naprava za preverjanje momentnih ključev / Device for testing torque wrenches - Metoda kalibracije skadna z EURAMET/cg-14/v.02, interni postopek QNCL164 - Calibration according to EURAMET/cg- 14/v.02, internal procedure QNCL164 : levo / desno : clockwise / anticlockwise (0,4 do/to 1000) Nm 0,8 % Mehanska energija / Mechanical energy OB05-32 Izdaja 7 Stran 20 od 22
21 Merilniki udarne žilavosti / Pendulum impact-testing machines -Posredna in neposredna metoda kalibracije skladna s : SIST EN ISO 148-2:2017 in SIST EN ISO 13802:2015 ali ASTM E23 16b, interni kalibracijski postopek QNCL163 -Indirect and direct calibration according to SIST EN ISO 148-2:2017 and SIST EN ISO 13802:2015 or ASTM E23 16b, internal QNCL163. FLUIDNE VELIČINE / Fluid Quantities Prostornina tekočin / Volume of Liquids (0,2 do/to 750) J Sila / Force: 0,25 % Dolžina /Length: 0,3 mm Kot / Angle:0,1 Čas / Time: 0,1 s Energija / Energy: 4 % 186. Porozimetri Porosimeters (0 do/to 10) l 0,1 % - Metoda kalibracije skladna z ASTM C231/C231M-10, Annex A1 točka A1.9, interni postopek QNCL Calibration according to ASTM C231/C231M-10, Annex A1 item A1.9 internal procedure QNCL153. : samo porozimetri tipa B, : B type porosimeters only. TEMPERATURA, VLAGA IN TERMOFIZIKALNE LASTNOSTI / Temperature, humidity and thermo-physical properties Tekočinski termometri / Liquid-in-glass thermometers - Primerjalna meritev v po internem kalibracijskem postopku QNCL Calibration by comparison according to internal QNCL (-20 do/to 140) C 0,08 C Indikacijski termometri / Thermometers with indicators - Primerjalna meritev v po internem kalibracijskem postopku QNCL Calibration by comparison according to internal QNCL (-20 do/to 140) C 0,08 C * CMC opomba / CMC te Razširjena negotovost je podana kot kombinirana standardna negotovost pomnožena s takšnim faktorjem pokritja k, da določa interval zaupanja približno 95 %. / Expanded uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k such that the coverage probability corresponds to approximately 95 %. ** Navedba informacije o merilnih instrumentih se v tej koloni uporabi le v tistih primerih, kjer to ne izhaja že iz opredelitve veličine, opisa (pod)področja in instrumentov v drugi koloni tabele. / Information on measuring instruments are specified in this column only if it is not clear from the description of quantity, (sub-) field, and/or instruments in the second column of this table. *** Kadar je za enoumno razumevanje zmogljivosti potreben opis robnih pogojev, vplivnih veličin ali drugih omejitev se ti navajajo v tej koloni (z enoumno oznako kolone), območje merjene veličine pa je v takem primeru določeno že v drugi koloni te tabele. / When a description of the boundary conditions, influence quantity or other limits is required for an unequivocal understanding of capabilities it is specified in this column (clearly indicated), providing that the range of measured quantity is defined in the second column of this table. OB05-32 Izdaja 7 Stran 21 od 22
22 Kopija priloge k akreditacijski listini za objavo na spletnem mestu. Podpisani original priloge na vpogled na sedežu SA. Copy of Annex to the accreditation certificate for web publishing. Signed original of Annex available for consultation at the SA head office. Direktor / Director dr. Boštjan Godec OB05-32 Izdaja 7 Stran 22 od 22
PRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP-107
Reg. št. / Ref. : 3150-0026/15-0005 Datum izdaje / Issued on: 16. februar 2018 Zamenjuje izdajo z dne / Replaces Annex dated: 28. december 2017 spletni strani SA,. the SA website,. PRILOGA K AKREDITACIJSKI
More informationPRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP- 099
Reg. št. / Ref. : 3150-0002/12-0013 Datum izdaje / Issued on: 22. december 2017 Zamenjuje izdajo z dne / Replaces Annex dated: 21. julij 2016 spletni strani SA,. the SA website,. PRILOGA K AKREDITACIJSKI
More informationPRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP-076
Reg. št. 1 Ref. No. : 3151-0156/10-0006 Datum izdaje 1 /ssued on: 13. julij 2015 Zamenjuje izdajo z dne 1 Replaces Annex dated: 18. Junij 2014 spletni strani SA, www.slo-akreditacija.si Information on
More informationPRILOGA K AKREDITACUSKI LISTINI Annex to the accreditation certificate
SLOVENSKA AkREDlfACUA Reg. st. / Ref. : 3150-0119/10-0010 Datum izdaje / Issued on: 28. februar 2018 Zamenjuje izdajo z dne / Replaces Annex dated: 30. november 2016 Veljavnost akreditacije je mogofie
More informationPRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP-004
Reg. št. / Ref. : 3150-0011/10-0013 Datum izdaje / Issued on: 9. marec 2017 Zamenjuje izdajo z dne / Replaces Annex dated: 8. oktober 2015 spletni strani SA, www.slo-akreditacija.si. Information on current
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationArrow Instruments Calibration
+91-8048765157 Arrow Instruments https://www.nabllab.net/ We are engaged in offering Services for our clients across the globe. With our vast industry experience we offer satisfactory services to our clients.
More informationMetode preskušanja cementa - 1. del: Določanje trdnosti Methods of testing cement - Part 1: Determination of strength
ima delno fleksibilni obseg (glej prilogo k akreditacijski listini LP 005), zato so v spodnji tabeli navedene izdaje standardov, po katerih se trenutno izvajajo preskušanja. Tabela 1/ Table 1 Tip obsega:
More informationBITUMINOUS DIGITRAC AUTO STABILITY PRESS MARSHALL AUTOMATIC DIGITAL TESTER MARSHALL TESTING MACHINE W/ RECORDER MODELS
18 BITUMINOUS DIGITRAC AUTO STABILITY PRESS The DigiTrac stability press for the Marshall method allows the operator to initially set up the platen and then the load and flow values are digitally tracked
More informationANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 UL Verification Services Inc. 1559 King Street Enfield, CT 06082 www.ul.com/consumer-products Point of Contact:
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationGrađevinski laboratorij d.o.o. Borongajska cesta 84, HR Zagreb Laboratorij Sesvete Slatinska 7, HR Sesvete
PRILOG POTVRDI O AKREDITACIJI br: Annex to Accreditation Certificate Number: Klasa/Ref. No.: 383-02/11-30/063 Urbroj/Id. No.: 569-02/3-12-39 Datum izdanja priloga /Annex issued on: 2012-12-03 Norma: HRN
More informationSEZNAM AKREDITIRANIH METOD V PRESKUSNEM LABORATORIJU IRMA (LP-008) / LIST OF ACCREDITED METHODS IN TESTING LABORATORY IRMA (LP-008)
SEZNAM AKREDITIRANIH METOD V PRESKUSNEM LABORATORIJU IRMA (LP-008) / LIST OF ACCREDITED METHODS IN TESTING LABORATORY IRMA (LP-008) 1 AKREDITIRANI ORGAN / Accredited body IRMA d.o.o. Ljubljana Slovenčeva
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationPRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP-076
Reg. št. 1 Ref No.: 3151-0156/10-0004 Datum izdaje 1 /ssued on: 29. oktober 2012 Zamenjuje izdajo z dne 1 Rep/aces Annex dated: 18. september 2012 spletni strani SA, www.slo-akreditacija.si Information
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationCylinders for Domestic Purposes Heat Pumps
Testing of Cylinders for use with heat pumps HWA 002:2015 Page 1 of 10 HOT WATER ASSOCIATION SPECIFICATION HWA 002:2015 Cylinders for Domestic Purposes Heat Pumps Specification of requirements and test
More informationSupertron Sensing Pte Ltd Certificate No. : LA C Blk 16 Kallang Place #07-04 Issue No. : 4 Singapore Date : 04 February 2015
Supertron Sensing Pte Ltd Certificate No. : LA-2011-0485-C Blk 16 Kallang Place #07-04 Issue No. : 4 Singapore 339156 Date : 04 February 2015 Page : 1 of 5 FIELD OF TESTING : Calibration and Measurement
More informationNorma: HRN EN ISO/IEC 17025:2007 Standard: (ISO/IEC 17025:2005+Cor.1:2006; EN ISO/IEC 17025:2005+AC:2006)
PRILOG POTVRDI O AKREDITACIJI br: Annex to Accreditation Certificate Number: Klasa/Ref. No.: 383-02/13-30/002 Urbroj/Id. No.: 569-02/10-13-40 Datum izdanja priloga /Annex issued on: 2013-08-29 Norma: HRN
More informationMC2501 OPERATING AND CALIBRATION INSTRUCTIONS
MC2501 OPERATING AND CALIBRATION INSTRUCTIONS CONTENTS 1 - CERTIFICATE OF CONFORMITY... 3 2 DESCRIPTION.... 4 2. 1 - GENERAL... 4 2. 2 - CHARACTERISTICS... 4 2. 3 WORKING PRINCIPLE.... 5 2. 3. 1 Hydraulic
More informationModel : LPSA-40A Please read this manual carefully before using the instrument Labnics Equipment
DRY & WET DISPERSION PARTICLE SIZE ANALYZER Instruction Manual Model : LPSA-40A Please read this manual carefully before using the instrument Labnics Equipment Table of Content CHAPTER CONTENT PAGE No.
More informationM7100 Pressure Transducer
SPECIFICATIONS Performance standard on and off highway engine and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless steel wetted surfaces
More informationSeznam akreditiranih metod. Laboratorij za toplotno zaščito in akustiko
Tip obsega: fleksibilen (možnost uvajanja manjših sprememb ) / Type of scope: flexible (possibility of implementing minor modifications of the method) Mesto izvajanja: v laboratoriju / Sit e: in the laboratory
More informationSeznam akreditiranih metod Laboratorij za cemente, malte in keramiko
ima delno fleksibilni obseg (glej prilogo k akreditacijski listini LP 005), zato so v spodnji tabeli navedene izdaje standardov, po katerih se trenutno izvajajo preskušanja. Tabela 1/ Table 1 Tip obsega:
More informationPRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP-047
Reg. št. / Ref. : 3150-0109/10-0012 Datum izdaje / Issued on: 10. oktober 2016 Zamenjuje izdajo z dne / Replaces Annex dated: 23. september 2015 spletni strani SA, www.slo-akreditacija.si. Information
More informationSimco Calibration Laboratory
+91-8049188996 Simco Laboratory https://www.indiamart.com/simcocalibrationlaboratory/ We are involved in Service Provider and a Bath and more. Further, we also render Service, Instrument Service and more.
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationPSA Series. Particle Size Analyzer
PSA Series Particle Size Analyzer Particle size analysis by laser diffraction Anton Paar s PSA series incorporates more than fifty years of experience. The world's first laser diffraction particle size
More informationM5800 Pressure Transducer with Rotatable Display
Pressure Transducer with Rotatable Display SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and customized Electrical Configurations FEATURES CE Compliance Reverse Polarity Protection
More informationVibration tests on a TNAML Luminaire
Sebert Trillingstechniek B.V. Report M13.001-P13.001 rev.01 Date 26 august 2013 Vibration tests on a TNAML Luminaire Client Technor Benelux B.V. Veersteeg 15 4212 LR Spijk The Netherlands Contact Person
More informationUltrasonic Clamp-On Flow Meter Testing
Ultrasonic Clamp-On Meter Testing Carried out for Micronics Ltd By Colin Judd Ultrasonic Clamp-On Meter Testing Carried out for: Micronics Ltd Unit B4 Business Centre Davies Way Loudwater High Wycombe
More informationU86B. Urea Dosing SPECIFICATIONS FEATURES APPLICATIONS
SPECIFICATIONS Mountable with O-ring seal Stainless Steel wetted surfaces Amplified ASIC calibrated Absolute, sealed gage Cable option Analog output SENT Output Optional (contact factory for details) FEATURES
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRILOG POTVRDI O
More information23" PANEL MOUNT INDUSTRIAL MONITOR REVISION C PRODUCT RELIABILITY TEST REPORT
23" PANEL MOUNT INDUSTRIAL MONITOR REVISION C PRODUCT RELIABILITY TEST REPORT Model No. HIS-ML23- _ C Table of Contents Test Report Overview... 3 Testing Rationale...3 Test Plan...4 Test 1 Cold (Steady
More informationLab 1b Cooling Tower Performance and Sensors for Thermal-Fluid Systems
Lab 1b Cooling Tower Performance and Sensors for Thermal-Fluid Systems OBJECTIVES Warning: though the experiment has educational objectives (to learn about boiling heat transfer, etc.), these should not
More informationManual Pressure Pump Generators Standard Laboratory Models Operation and Seal Packing Instructions
Manual Pressure Pump Generators Standard Laboratory Models Operation and Seal Packing Instructions High Pressure Equipment Company 2955 West 17th Street, Suite 6 PO Box 8248 Erie, PA 16505 USA 814-838-2028
More informationFRESH AND HARDENED CONCRETE TESTING
CONCRETE CUBE MOULDS LT -B000 LT -B0006 LT -B0007 LT -B0008 STANDARDS: EN 2390-, ASTM C39, C92 PRODUCT CODE: LT- B000 & LT- B0004 Hard plastic or steel cube moulds are manufactured in accordance to dimensions
More informationالجمهورية الجزائرية الديمقراطية الشعبية
Université de M sila Faculté de technologie Département de genie mécanique 1ere année master toutes options confondues Matière: Anglais technique 1- Grammar exercise. Some areas of language consistently
More informationonlinecomponents.com
Fall 2008 New Product Introduction Amprobe launches 18 new products to measure: B Humidity B Temperature B Air Flow B Sound B Light B Gas Detection B Distance B RPM B Pressure B Cable Wiring www.amprobe.com
More informationTable of Contents. Page Quick Set-up Instructions 1. Theory of Operation 2. Specifications 3. TM 1003W Controls and Connections 4
Table of Contents Page Quick Set-up Instructions 1 Theory of Operation 2 Specifications 3 TM 1003W Controls and Connections 4 1. Power Source Connector 5 2. Alarm Output Connector 5 3. Variation Detection
More informationHAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for
HAA je potpisnica multilateralnog sporazuma s Europskom organizacijom za akreditaciju (EA) HAA is a signatory of the European co-operation for Accreditation (EA) Multilateral Agreement PRIJEDLOG PRILOG
More informationHEAD QUARTER NEW JERSEY LBORATORY VIETNAM LABORATORY
WORLDWIDE LOCATIONS เป นผ ให บร การท ได ร บการร บรอง ISO17025 และเป นท ยอมร บท วโลก UNITED STATES MEXICO THAILAND VIETNAM HEAD QUARTER NEW JERSEY LBORATORY VIETNAM LABORATORY GLOBAL LEADER IN TEST EQUIPMENT
More informationAndrew Cooper Cooper Research Technology. Talar du engelska?
Andrew Cooper Cooper Research Technology Talar du engelska? 1 Topics of this presentation EN12697-26 Stiffness EN12697-25 Cyclic compression EN12697-24 Fatigue EN12697-22 Wheel tracking EN12697 Specimen
More informationMore Precision. indusensor // Linear inductive displacement sensors
More Precision indusensor // inear inductive displacement sensors 6 Displacement sensors with external electronics indusensor VDT - Proven VDT technology - Measuring ranges ±1 ±25mm - Extremely accurate
More informationCO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 PPE-R/00.017 Version 2 RECOMMENDATION FOR USE Number of pages: 5 Approval stage : Approved on : Origin : Horizontal Committee, C2D Ad hoc group
More informationBCTC CARPET TECHNICAL CENTRE
Wira House West Park Ring Road Leeds, LS16 6QL Tel: +44 (0)113 259 1999 Fax: +44 (0)113 278 0306 Web: http://www.bttg.co.uk/bctc Email: CSLeeds@bttg.co.uk 7 September 2010 Page 1 of 7 Client: Rectory Farm
More informationSPECIFICATIONS. SENSOR SOLUTIONS ///LM Page 1 09/2015
SPECIFICATIONS 316L SS Pressure Sensor with PVC Threads Small Profile 4.5V (typ) High Level Output Gage, Absolute, Sealed Gage ASIC Calibrated Variety of Cable Lengths The LM incorporates stainless steel
More informationBasic Board Mount Pressure Sensors: NBP Series Uncompensated/Unamplified 60 mbar to 10 bar [1 psi to 150 psi]
Basic Board Mount Sensors: NBP Series Uncompensated/Unamplified 60 mbar to 10 bar [1 psi to 150 psi] DESCRIPTION Honeywell s Basic Board Mount Sensors: NBP Series Uncompensated/Unamplified are low pressure
More informationHaridarshan Instru-Lab
+91-8048764513 Haridarshan Instru-Lab https://www.haridarshan.co.in/ Since our commencement we have been recognized in the market as supplier and trader of Testing Equipment and Instruments. We have gained
More informationTHEORY OR OPERATION 2 SENSOR UNIT - MECHANICAL 6 SENSOR UNIT - ELECTRICAL 8 CONTROL UNIT - MECHANICAL 9 CONTROL UNIT - ELECTRICAL 9 OPTIONS 11
Table of Contents INTRODUCTION 1 THEORY OR OPERATION 2 DESCRIPTION 5 SENSOR UNIT - MECHANICAL 6 SENSOR UNIT - ELECTRICAL 8 CONTROL UNIT - MECHANICAL 9 CONTROL UNIT - ELECTRICAL 9 SPECIFICATIONS 10 OPTIONS
More information154BC SPECIFICATIONS. Please refer to the 154N uncompensated and constant voltage datasheets for more information on different features of the 154.
SPECIFICATIONS Low Cost 316L Stainless Steel or Titanium 19mm Diameter Package 0-100mV Output Gage and Absolute Wide Compensated Temperature Range The 154BC is a 19mm small profile, media compatible, piezoresistive
More information86A SPECIFICATIONS. 316L SS Pressure Sensor Small Profile V High Level Output Gage, Absolute ASIC Calibrated
(Image displays Absolute type) 86A SPECIFICATIONS 316L SS Pressure Sensor Small Profile 0.5-4.5V High Level Output Gage, Absolute ASIC Calibrated The 86A is a small profile, media compatible, piezoresistive
More informationContact person Date Reference Page Christian Larsson P01958A 1 (3) Safety
issued by an Accredited Testing Laboratory Contact person Christian Larsson 2016-09-05 6P01958A 1 (3) Safety +46 10 516 57 61 Christian.Larsson@sp.se Accred. No. 1002 Testing ISO/IEC 17025 Olar-Portconsult
More informationU5600. Wireless Pressure Transducer SPECIFICATIONS
SPECIFICATIONS Enhanced Pressure Accuracy Digital 24-bit ADC Output, I 2 C Protocol Wireless Bluetooth 4.0 Connection CE Compliant with Variety of Pressure Ports Compact and Battery Powered [CR2050] Optional
More informationM5800 Pressure Transducer with Rotatable Display
Pressure Transducer with Rotatable Display SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and customized Electrical Configurations Optional Stainless Steel Snubber CE Compliant
More informationLaser Scan Micrometer Page 418. Laser Scan Micrometer Page 423
Laser Scan Micrometers Laser Scan Micrometer Page 418 Laser Scan Micrometer Measuring Unit and Display Unit Package Page 419 Laser Scan Micrometer Measuring Unit Page 420 Laser Scan Micrometer Page 423
More information17" UNIVERSAL MOUNT INDUSTRIAL MONITOR REVISION E, F & G PRODUCT RELIABILITY TEST REPORT
17" UNIVERSAL MOUNT INDUSTRIAL MONITOR REVISION E, F & G PRODUCT RELIABILITY TEST REPORT Model No. HIS-UM17- _ E, HIS-UM17- _ F and HIS-UM17- _ G Table of Contents Test Report Overview... 3 Testing Rationale...3
More informationCALIBRATION HOW IT WORKS
HIGH POWER SOLUTIONS POWER DETECTORS ENERGY DETECTORS At Gentec-EO, we understand that the essence of our business since 40 years has been delivering accuracy. There are no half measures: it either measures
More informationPRILOG POTVRDI O AKREDITACIJI br: 3115 Annex to Accreditation Certificate Number:
PRILOG POTVRDI O AKREDITACIJI br: Annex to Accreditation Certificate Number: Klasa/Ref..: 383-02/17-70/001 Urbroj/Id..: 569-05/3-17-37 Datum izdanja priloga /Annex Issued on: 2017-07-20 Zamjenjuje prilog/replaces
More informationInstallation Instructions for the RTY Series Hall-Effect Rotary Position Sensor Issue 4
Installation Instructions for the RTY Series Hall-Effect Rotary Position Sensor Issue 4 569443 GENERL INFORMTION The RTY Series uses a magnetically biased, Hall-effect integrated circuit (I) to sense rotary
More informationDruck DPI 705/DPI 705 IS Series
GE Sensing & Inspection Technologies 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Druck DPI 705/DPI 705 IS Series Digital Pressure
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 21501-2 First edition 2007-05-15 Determination of particle size distribution Single particle light interaction methods Part 2: Light scattering liquid-borne particle counter
More informationMore Precision. indusensor // Linear inductive displacement sensors
More Precision indusensor // Linear inductive displacement sensors 18 Long-stroke sensors for hydraulics & pneumatics indusensor EDS - Measurement ranges 75... 630mm - Linearity ±0.3% FSO - Integrated
More informationPRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate LP-032
Reg. št. / Ref. : 3150-0070/10-0013 Datum izdaje / Issued on: 3. maj 2018 Zamenjuje izdajo z dne / Replaces Annex dated: 29. november 2017 spletni strani SA, www.slo-akreditacija.si. Information on current
More informationLaboratorija za ispitivanje građevinskih materijala MMLab d.o.o. Kotor Lasta Grbaljska bb, Kotor
Dodatak Sertifikatu o akreditaciji - identifikacio : ATCG-0042 Annex to Accreditation Certificate-Identification Number:ATCG-0042 Dodatak Sertifikatu o akreditaciji sa akreditaciom em Li 15.21 Annex to
More informationISO Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Laser assembly
INTERNATIONAL STANDARD ISO 22827-1 First edition 2005-10-15 Acceptance tests for Nd:YAG laser beam welding machines Machines with optical fibre delivery Part 1: Laser assembly Essais de réception pour
More informationU5300 Industrial Pressure Transducer
FEATURES Heavy Industrial CE Approval 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output ±0.1% Accuracy ±0.5% Total Error Band Compact Outline -40 C to +125 C
More informationInstruction Manual. Self-Leveling Combination Cross-Line Laser and Five-Beam Laser Dot Model No &
6339H_Manuals 10/24/12 12:56 PM Page 1 Self-Leveling Combination Cross-Line Laser and Five-Beam Laser Dot Model No. 40-6685 & 40-6687 Instruction Manual Congratulations on your choice of this Self-Leveling
More informationDSF xx15.xx xhv Ex-Atex Ex-Atex Certified Two wire Hall Effect Speed Sensor
DSF xx15.xx xhv Ex-Atex Product ID Type # Product # Drawing # DSF 1215.01 SHV Ex-atex (5m) 304Z-05197 113216 DSF 1415.01 AHV Ex-atex S148 304Z-05256 113351 DSF 1615.01 SHV Ex-atex (5m) 304Z-05196 113214
More informationModel 3140 Series. Tension/Compression Pancake Load Cell DESCRIPTION FEATURES
Tension/Compression Pancake Load Cell DESCRIPTION Designed for general purpose use in demanding applications in automotive, aerospace, and military applications. Some advantages of these tension/compression
More information818 Series Low-Power Detectors
1090 818 Series Low-Power Detectors Newport uses the highest quality semiconductor detector materials available in our 818 Series Low-Power Detectors. In addition, each detector arrives with a complete
More informationOPERATION MANUAL MODEL 8102 ACCELEROMETER
OPERATION MANUAL TE CONNECTIVITY SENSORS/// 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year from date of shipment to original purchaser to
More informationThe application of Long Range Ultrasonic Testing (LRUT) to inspect railway tracks
The application of Long Range Ultrasonic Testing (LRUT) to inspect railway tracks Carmen Campos Castellanos Yousef Gharaibeh NDT Technology Group TWI Contents MonitoRail Project overview Rail industry
More information89BSD Digital Output
SPECIFICATIONS Stainless Steel with O-Ring Seal Pressure/Temperature Read-Out (24-bit DS ADC) ASIC Calibrated Absolute, Sealed Gage 9mm Diameter The 89BSD is a 9mm diameter small profile, media compatible,
More informationSTS Directory Accreditation number: STS 0329
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 Laboroute SA Laboratoire de recherche et de contrôle des matériaux routiers Route de l Industrie 78 CH-1564 Domdidier
More informationBC-HTO RELIABLE SENSING TECHNOLOGY
BC-HTO DUCT MOUNT INSTALLATION The Series RHP duct mount transmitters are ideal for monitoring humidity and temperature in supply or return air ducts. For quick verification of measurements, an optional
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60312-1 Edition 1.0 2010-09 Vacuum cleaners for household use Part 1: Dry vacuum cleaners Methods for measuring the performance INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE
More informationMSP100 Pressure Transducer
SPECIFICATIONS Analog and 14-Bit Digital Output Available Small Size Low Cost 316L Stainless Steel or 17-4PH FEATURES Single Piece Construction; No Welds, No Oil 100% Stainless Steel Isolation for Harsh
More informationSTS Directory Accreditation number: STS 0030
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 BSL Baustofflabor AG Postgässli 23a 3661 Uetendorf Head: Felix Solcà Responsible for MS: Dr. Benjamin Kaeser Telephone:
More information86BSD Digital Output
SPECIFICATIONS Stainless steel with O-ring seal Pressure/temperature read-out Digital output ASIC calibrated Absolute, gage Cable/connector option Low power option 16mm diaphragm diameter The 86BSD is
More informationAnnex of the certificate (Page 1/5) Accreditation Scope
Annex of the certificate (Page 1/5) Accreditation Scope As a Testing Laboratory Tested Materials / Products EX LABORATORY Metallic materials Construction products Address: Küçük Çiğli Mh. 8780/1 Sk. No:5
More informationXEUS mirror calibration:
XEUS mirror calibration: The PANTER X-ray Test Facility: accommodation of optics with long focal lengths etc., Wolfgang Burkert, Gisela Hartner, Bernd Budau XEUS Workshop, ESA, ESTEC, Noordwijk, 05-06
More informationMeasuring Couch Motion Accuracy with X-ray Beam Fluence
Measuring Couch Motion Accuracy with X-ray Beam Fluence Rudi Labarbe, M.S. and Brett Nelson, M.S. IBA Particle Therapy, Belgium and Logos Systems, Scotts Valley, CA Introduction The accuracy of radiosurgery
More informationCALIBRATION HOW IT WORKS
HIGH POWER SOLUTIONS POWER DETECTORS ENERGY DETECTORS At Gentec-EO, we understand that the essence of our business since over 45 years has been delivering accuracy. There are no half measures: it either
More informationMore Precision. indusensor // Linear inductive displacement sensors
More Precision indusensor // Linear inductive displacement sensors 14 Long-stroke sensors for hydraulics & pneumatics indusensor EDS - Measurement ranges 75... 630mm - Linearity ±0.3% FSO - Integrated
More informationSECTION METERS AND GAGES FOR HVAC PIPING
SECTION 23 0519 METERS AND GAGES FOR HVAC PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Thermometers. 2. Gages. 3. Test plugs. 4. Thermowells. 1.2 SUBMITTALS A. Product Data: For each type
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC/TS 62600-100 Edition 1.0 2012-08 colour inside Marine energy Wave, tidal and other water current converters Part 100: Electricity producing wave energy converters Power performance
More informationTechnical Note. Noise emission from Dehumidifier Type C65E TC Project no.: I Page 1 of July 2016
Technical Note Noise emission from Dehumidifier Type C65E-11.1 Performed for COTES A/S Project no.: I101033 Page 1 of 10 01 July 2016 DELTA Venlighedsvej 4 2970 Hørsholm Denmark Tel. +45 72 19 40 00 Fax
More information316L SS Pressure Sensor High Pressure 0-100mV Output Absolute
SPECIFICATIONS 316L SS Pressure Sensor High Pressure 0-100mV Output Absolute The 89 uncompensated is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless
More information15203B 25203B 35203B Uniaxial Biaxia Triaxial
Uniaxial Biaxia Triaxial SPECIFICATIONS Digital Accelerometers User Configurable ±1 g to ±15 g Inertial Measurements Made Fast and Easy FEATURES AND BENEFITS User Configurable Settings The analog/digital
More informationBasic Board Mount Pressure Sensors. NBP Series Uncompensated/Unamplified 60 mbar to 10 bar [1 psi to 150 psi] Datasheet
Basic Board Mount Sensors NBP Series Uncompensated/Unamplified 60 mbar to 0 bar [ psi to 50 psi] Datasheet Basic Board Mount Sensors Honeywell s Basic Board Mount Sensors: NBP Series Uncompensated/Unamplified
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61400-11 Edition 2.1 2006-11 Edition 2:2002 consolidated with amendment 1:2006 Wind turbine generator systems Part 11: Acoustic noise measurement techniques Reference number
More informationPHIREX AUSTRALIA CATALOGUE & DATA SHEETS. April 2005, Rev 2. Fogex Water Mist Fire Protection System Components PHX-3064
CATALOGUE & S April 2005, Rev 2 PHX-3064 Fogex Water Mist Fire Protection System Components Fogex F11 Water Mist Nozzle Fogex F11 Water Mist Nozzle Features Al. Bronze construction for added safety and
More informationModel 424. Wing Union/Hammer Union Pressure Sensors DESCRIPTION POTENTIAL APPLICATIONS FEATURES
Wing Union/Hammer Union Pressure Sensors DESCRIPTION The Model 424 Wing Union Pressure Sensors are rugged sensors designed for use with 2002 and 2202 wing unions in demanding land-based and off-shore applications.
More informationSOFTWARE GSHOB - Version A
SOFTWARE GSHOB - Version A for WINDOWS NT, 95 or better USER MANUAL Georges STEVENS Jardins de Diane A11-291 chemin de Tucaut - 31270 CUGNAUX - France Tél. et Fax 33 5 61 86 53 82 e-mail : stevens.georges@gmail.com
More informationM5200 Industrial Pressure Transducer
SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof UL Certified Gage, Sealed, Compound
More informationmetro B6012 VIBRATIONS SIMPLIFIED... Product brochure Easiest portable vibration analyzer and balancer TECHNOLOGIES PVT. LTD.
metro B6012 VIBRATIONS SIMPLIFIED... Product brochure Easiest portable vibration analyzer and balancer TECHNOLOGIES PVT. LTD. Product brocure 1 is reliable, fast and easiest to use tool designed for routine
More informationß-Aerosolmonitor FHT 59 C
Technical Specification ZT-240-1103 E page 1/11 1. FHT 59C Moving Filter Aerosol Monitor 1.1 General The FHT 59 C is a unique moving filter aerosol monitor that can operate for one year or longer without
More information