Life Alarm Multiplex Systems

Transcription

1 Life Alarm Multiplex Systems UL, ULC Listed FM Approved Central Processing Unit and Console-Mount FEATURES: l CPU and Accessory tems Housed in an Attractive, Freestanding Console l All modules Designed for 19 Rack-Mount and Equipped with Slide Mounts for Front Access l 2040 Monitor Points l 1024 Control Points l 2 Communications Channels 0 10 Levels of Priority l Event-nitiated Programs l Battery Back-up l Security Alarm Bypass l Time Control, Field-Programmable l Alphanumeric LED Display l Distributed Processing l Alarm Verification OPTONAL FEATURES: 0 20-Column Strip Printer l BCD Time Output for Synchronizing Simplex Clock Systems l Standard RS-232-C Output to Control Remote Printer(s) and/or CRT(s) l Full Alphanumeric Key Pad CPU W/ ADDTONAL SNGLE BAY GENERAL: The Simplex 2120 Multiplex System consists of the Central Processing Unit (CPU), Status Command Center(s) (SCC), and Transponders with communications between system modules for reporting and/or controlling essential conditions and functions within a building or multi-building complex. The system is ideally suited for applications in smaller-size buildings where the higher base cost of a more complex Multiplex System cannot be justified, and it offers an alternative to a larger hardwired system s installation cost that may be prohibitive. Both the microprocessor-based CPU and Transponders use the latest in electronics technology, designed specifically to be cost-effective over a wide range of Life Safety-Fire-Security-Energy applications. The system can be easily expanded when additional monitor/control tasks are required. For more detailed information refer to data sheet S DESCRPTON: The console is an attractively styled 51 -high console containing a Central Processing Unit (CPU) with space available for accepting standard 19 rackmounted equipment. The is the same as the with the additional capability to extend the console height up to 86. Standard colors for these consoles are black frame and module panels systems berge on side and top panels, a rust-colored rear door and lower front panel, with a wood grain cowlrng around the front perimeter. All contractor connections shall be in the bottom of the console Simplex Time Recorder Co. Publication S

2 CONSOLE DMENSONS OF SPACE SEE NOTE 2 la TURRETTOP 19 SLOPE J The slope turret top, shown above, and the /55 -slope turret top is to allow status command center door modules to be angled down at a more direct line of sight to the operator for ease in viewing the status of points being annunciated. SEE DETAL. A-A REAR OF RACK -CONTRACTOR S WRNG AREA VEW A-A BATTERY AREA HEGHT (DMENSON A ) (128.3cm) (129.2cm) (151.4cm) (173.7cm) (195.9cm) (218.lcm) 30 The pie section, shown above, and the pie sections are to be used when console bays are arranged in corners or in a wraparound fashion, to insure proper spacing and for overall stability. NOTES 1. Door is wide. wth a nch r&i. 2. To remove drawer umt from the rack there must be a min. of inch space. 3 Frame width is 21 t 16. add 3 8 ior each 01 the two side panels to determine the total wdth of a console system.

3 CPU MODULE OPERATOR S PANEL- LOCA PRNT LOCAL / KEY BOARD 0 1 MAY BE PROGRAMMED TO OPERATE ONLY DUR- NG COMMERCAL POWER OUTAGES. CONFGURATON NFORMATON 1. A 7 -high panel space shall henceforth be referred to as 1 row. Each row is 3 units deep (front, center, rear) of available mounting space. 2. CONSOLE SZE AVALABLE MOUNTNG SPACE REQURED FLLER PANEL 51 3 Rows 60 4 Rows (1 A ) 69 5 Rows (3% ) 78 6 Rows (5% ) 86 7 Rows (5% ) 3. A filler panel must be used for each unused row of front-mounted equipment. 4. When the writing surface is not required a V1 filler panel must be used. 5. When a local keyboard or the local keyboard and printer, shown above, is not ordered, the CPU module containing the operator s panel will require only 1 row (7 height) of space. 6. A Status Command Center requires 1 row, front unit only, for each increment of 10 modules. Two 1 O- module increments may be mounted side by side in adjacent bays. The electronics for a capacity of 1 through 256 points requires 1 center unit, 257 through 512 points requires an additional center unit of mounting space. 3

4 2120 CPU AND/OR STATUS COMMAND CENTER N A CONSOLE PACKAGE 2120 CPU COMMUNCATON ---i-es Console Free Standing Custom Low Silhouette CHANNELS Standard D.C. Type 6 (Class A) Loop D.C. CPU POWER SOURCE - SELECT ONE nternal Power wl Battery Standby External Power CURRENT REQUREMENT 120 ma 120 ma S CPU -SELECT, F REQURED English 680 ma VOLTAGE - SELECT ONE OV 50160Hz 2120-l V 50l60Hz CPU OPTONS Keyboard/Printer (includes remote printer interface, paper low indicator, take-up and advance) Local BT (Eight Monitor Points, Four Control) Local BT wi Local Mode (Eight Monitor Points, Four Control) City Connect /O 24V City Connect /O 12V 180 ma _ AMPS WHEN PRNTNG 35 MA SUPV. 37ma+ 34 ma/relay in alarm Dual RS-232-C Ports 1 120ma DC. To RS-232-C Converter 125 ma Celestra nterface Fiber Ootic Line Driver 40 ma 170 ma 1 ADD 1.6 ma FOR EACH TRANSPONDER ADDRESS USED N THE SYSTEM. 4

5 STATUS COMMAND CENTER MODULE CAPACTY CURRENT REQUREMENTS lo-module SCC Module SCC Module SCC Module SCC PONT CAPACTY Point Maximum 148 ma Point Maximum 183 ma Pornt Maximum 183 ma Point Maximum 218 ma Point Maximum 253 ma Point Maximum 393 ma Point Maximum 428 ma Point Maximum 463 ma Pornt Maximum 463 ma Point Maximum 498 ma SCC MODULES Point Red LED Module Point Yellow LED Module Point Green LED Module Pornt Switch Module-Momentary Pornt Red LED Module Pornt Red Yellow LED Module B-Point Switch Red LED Module Momentary g-point Switch Green LED Module Momentarv Point Switch Red LED Module Point. 3-position switch RED LED Module Label Module 8mA PER LED WHEN LT BLANK LABELS Blue Yellow Warm Red Orange Beige 5

6 /p UNT OF SPACE USED OTHER /> AVALABLE. 1 UNT OF SPACE USED REQURED MOUNTNG SPACE THS OPTON MAY ALSO MOUNT HERE SPACE AVALABLE 2120 CONSOLE OPTONS P..D. DESCRPTON 31 %-Ll-l??R 1 Dlgltal Message Player Package (ncludes L L L Message Player. One Programmed Message Card. Four-Place Card Rack and Timer Module) Voice Communication Packagng Option Fire Fighter s Master Telephone p-g+-, Remote Mic. nterface ~~ 1 Phone to Audio nterface L -~~~~~ Pos Card Rack. Front-Mount Pos Card Rack. Front-Mount Pos Card Rack. nternal-mount MOUNTNG REQUREMENTS SJJ LLA~M %ct CENTER UNT OS Card Rack nternal-mount rh Batteries BOTTOM AH Batteries OF AH Batteries CONSOLE Yii? R. ma..,. fi3 - ma,,... test current 76mAto140m^ Single 50-Watt Ampllfler Voice Communication Package Option Simultaneous Audio Capability SCC OPTONS Power Supply, 24VDC. 5AMP L,L _ _ _ Relay Driver, 8 Spdt. 9, %-la-larld Rwnnte Switch Mnd~~le 16 Pnintn Remote Con!roliSwitch Console Fixture Options Additional Single Bay 51 Module Console Height Extended to 60 ht Extended to 69 tht Extended to 78 rht Extended to 86 v Seenotel 200 ma 2.2 Amos, 125 ma Alarm Current UPto150mAP. Below Writing Surface Only. Wax. Qty. 6-m BaY, 5 ma LED Output Turret Top- 19 Slope i 1 Turret TOD Slooe 1 TWO SNGLE 50-WATT AMPLFERS CAN BE MOUNTED N THE SAME ROW WTH SPACE AVAL- ABLE FOR SCC DOOR MODULES ONLY. 2. FREESTANDNG CUSTOM ONLY 6

7 OPTONAL MODULES TYPCAL STATUS COMMAND CENTER b-19 (48.3cm).d T 7 (17.8cm) VOCE COMMUNCATON SYSTEM MCROPHONE 7

8 Gardner, Massachusetts U.S.A. absimplex Offices and Representatives Throughout the World Ail speciflcatlons and other lnformatlon shown were current as of publlcatlon. and are subject to change wlthout notice. Printed in U.S.A.