Subwoofer applications using the SubCast System

Transcription

1 SUBCAST-SW#1 Connecting the SubCast using a Surround Sound System with a single Subwoofer output and an active Subwoofer Subwoofer Output LF From Surround Receiver 2 RCA single to RCA Dual cables will be required for this connection. SubCast Transmitter = Surround Right channel To Subwoofer SubCast Receiver Note: Subwoofer shown in this diagram is Active type. If a passive subwoofer is used, an amplifier between the SubCast Receiver and the subwoofer will be required. Active Subwoofer (MONO)

2 SUBCAST-SW#2 Connecting the SubCast using a Surround Sound System with a single Subwoofer output and a Passive subwoofer Subwoofer Output LF SubCast Transmitter From Surround Receiver = Surround Right channel 2 RCA single to RCA Dual cables will be required for this connection. To amplifier To Subwoofer SubCast Receiver Amplifier Passive Subwoofer (MONO)

3 SUBCAST-SW#3 Subwoofer applications using the SubCast System Connecting the SubCast using a Surround Sound System with Stereo Subwoofer outputs and an Active Subwoofer equipped with Stereo inputs. Sub L Subwoofer L channel Output Subwoofer R channel Output Sub R SubCast Transmitter From Surround Receiver = Surround Right channel 2 RCA Stereo cables will be required to make this connection. To Subwoofer SubCast Receiver Note: Subwoofer shown in this diagram is Active type. If a passive subwoofer is used, an amplifier between the SubCast Receiver and the subwoofer will be required. Active Subwoofer (With Stereo inputs)

4 SUBCAST-SW#4 Connecting the SubCast using a Surround Sound System with Stereo Subwoofer outputs and a Passive Subwoofer equipped with stereo inputs. Sub L Subwoofer L channel Output Subwoofer R channel Output Sub R From Surround Receiver SubCast Transmitter = Surround Right channel 3 RCA Stereo cables will be required to make this connection. To amplifier To Subwoofer SubCast Receiver Stereo Amplifier Passive Subwoofer (With Stereo inputs)

5 SUBCAST-SW#5 Using the SubCast to connect 2 Subwoofers with stereo inputs to a Surround Sound System equipped with Subwoofer Stereo Outputs. Sub L Sub L: Subwoofer L channel Output To 2 nd transmitter Sub R Sub R: Subwoofer R channel Output To 1 st Transmitter 1 Single to dual RCA cable is provided with each SubCast kit. In this application we are connecting 2 transmitters with left and right channel low frequency information. SubCast Transmitter #1 Set to channel 1 Note: 2 single to dual RCA cables are needed for this connection SubCast Transmitter #2 Set to channel 2 To 2 nd Transmitter = Surround Right channel Each transmitter will link to its corresponding receiver, and each receiver will be connected to its own Subwoofer. Active subwoofers are being used in this example, but if passive subwoofers are used, an amplifier for each one will be required. SubCast Receiver #1 Set to channel 1 SubCast Receiver #2 Set to channel 2 1 Stereo RCA cable is provided with each SubCast kit. Active Subwoofer #1 (With Stereo inputs) Active Subwoofer #2 (With Stereo inputs)

6 SUBCAST-SW#6 Using the SubCast to connect 2 Subwoofers with stereo inputs to a Surround Sound System equipped with a single Subwoofer Output. To 2 nd transmitter LF LF: Subwoofer Output SubCast Transmitter #1 Set to channel 1 A stereo mini plug to RCA cable is needed to make the connection between the 2 SubCast units SubCast Transmitter #2 Set to channel 2 To 1 st Transmitter 1 RCA single to dual cable is provided with each SubCast kit, as well as 1 mini to RCA. = Surround Right channel In this application we are connecting 2 transmitters in a daisy chain fashion, so that both transmitters get the same audio material at their input connectors. Each transmitter will link to its corresponding receiver, and each receiver will be connected to its own Subwoofer. Active subwoofers are being used in this example, but if passive subwoofers are used, an amplifier for each one will be required. SubCast Receiver #1 Set to channel 1 SubCast Receiver #2 Set to channel 2 Active Subwoofer #1 (With Stereo inputs) Active Subwoofer #2 (With Stereo inputs)

7 If your Audio equipment doesn t have any line level outputs available, you can still connect it to the SubCast system; simply get a Speaker to line level converter and connect it as shown on the diagram. You can get this small converter/adapter at most home electronics stores or you can get it directly from Soundcast. Application diagram SUBCAST-SW#7 Using the SubCast System in a Speaker level scenario Rear panel section of an Audio Receiver with Speaker level outputs Speaker level Signal Transmitter Speaker to line level converter 1 mini plug to RCA cable is required for this connection Line level Signal Subwoofer NOTES: - Drawing is not to scale - Subwoofer shown is Active type. If a passive subwoofer is used, an amplifier will be required at the receiver end. Receiver 2 Stereo RCA cables are provided with SubCast

8