MERIDIAN CINEMA SYSTEM. Drawn by: Chris Smythe Design Revision:V1.0 Salesperson: Chris Cope Date: 25/09/2017

Size: px

Start display at page:

Download "MERIDIAN CINEMA SYSTEM. Drawn by: Chris Smythe Design Revision:V1.0 Salesperson: Chris Cope Date: 25/09/2017"

Godfrey Stanley
5 years ago
Views:

1 MERIDIAN CINEMA SYSTEM Drawn by: Chris Smythe Design Revision:V1.0 Salesperson: Chris Cope Date: 25/09/2017

2 2

3 STANDARD 5.1 CINEMA SYSTEM 3

4 STANDARD SYSTEM: SOUND PRESSURE LEVEL The maximum sound pressure level (SPL) is determined by the Centre channel speaker. High performance cinemas meet the THX Reference specification of 105dB at the listening positions. The DSP3300 speaker can deliver over 100dB to the seating location. SPL > 105dB SPL > 100dB SPL < 100dB 4

5 STANDARD SYSTEM: LOUDSPEAKER LAYOUT Television Screen Suggested 65" DSP3300 Loudspeaker Front Right DSP3200 Loudspeaker Rear Right DSP3300 Loudspeaker Centre DSP3300 Loudspeaker Front Left DSP3200 Loudspeaker Rear Left DSW Subwoofer 5

STANDARD SYSTEM: LEFT, CENTRE & RIGHT DSW Subwoofer DSP3300 Loudspeaker Front Left DSP3300 Loudspeaker Centre DSP3300 Loudspeaker Front Right Standard System: Left, Centre & Right Channels The Left &

6 STANDARD SYSTEM: LEFT, CENTRE & RIGHT DSW Subwoofer DSP3300 Loudspeaker Front Left DSP3300 Loudspeaker Centre DSP3300 Loudspeaker Front Right Standard System: Left, Centre & Right Channels The Left & Right channel audio is produced by Meridian DSP3300 loudspeakers positioned either side of the projection screen. The centre channel audio is produced by a DSP3300 loudspeaker positioned below the screen. This can be wall mounted or placed upon a shelf below the screen. The television screen shown is approximately 65" in size. 6

7 STANDARD SYSTEM: SIDE SPEAKER LAYOUT Television 65" Wall Mounted Screen DSP3300 Loudspeaker Front Channels DSW Subwoofer DSP3200 Loudspeaker Rear Channels 7

8 STANDARD SYSTEM: REAR SPEAKER LAYOUT DSP3200 Loudspeaker Rear Right DSP3200 Loudspeaker Rear Left 8

9 STANDARD SYSTEM: WIRING DIAGRAM Video Sources The Meridian Standard Cinema Specification is designed to provide the viewers with an immersive audio visual experience. UHD722 HDMI Audio Processor Audio signal is processed and passed to the loudspeakers by the G65 Surround Controller. The front left and right channels are DSP3300 loudspeakers positioned either side of the projection screen. They can be wall mounted and positioned either at the same level as the centre channel or horizontally. The centre channel audio is produced by a perfectly matched DSP3300 loudspeaker installed below the screen. DSW Subwoofer Additional Subwoofer DSW Subwoofer DSP3300 Front Left G65 Surround Controller DSP3300 Centre DSP3300 Front Right 65" Television The rear channel audio is produced by DSP3200 loudspeakers and positioned to create the best coverage within the room. Low frequency sound is produced by a DSW Subwoofer placed at the front of the room. For more low frequency impact, a second DSW Subwoofer could be added to the system. DSP3200 DSP3200 Rear Left Rear Right Located in Room Power socket required SpeakerLink Stereo Analogue Audio Coaxial Digital S/PDIF Point to Point Cat. Cable Non Meridian Equipment Power in wall required 4K HDMI - Audio MMHR Meridian Comms Mono Analogue Audio Mono Balanced Audio Optical Digital S/PDIF USB RS232 Control IR Control Located in Rack 4K HDMI - Video HDMI Passive Speaker Cable Network Connection 12Volt Trigger 9

10 PREMIUM 7.1 CINEMA SYSTEM 10

11 PREMIUM SYSTEM: VIEWING ANGLES Viewing Angles Industry standards set out by THX and SMPTE recommend the following viewing angles: 80 degrees Widest acceptable. May lead to viewer fatigue over long periods 62 degrees Widest recommended by SMPTE 45 degrees Reference viewing angle by THX/SMPTE 36 degrees Narrowest recommended viewing angle by THX 26 degrees Narrowest acceptable viewing angle by THX We would always recommend the 45 degree viewing angle due to it providing the most immersive visual experience 11

PREMIUM SYSTEM: IDEAL SEATING POSITION Seating Area Industry standards set out by THX and SMPTE recommend that the seating area is within a 60 degree arc from the centre of the screen.

12 PREMIUM SYSTEM: IDEAL SEATING POSITION Seating Area Industry standards set out by THX and SMPTE recommend that the seating area is within a 60 degree arc from the centre of the screen. The recommended seating area that is within the following viewing angles is shown by the blue hatched area on the drawing. 60 degrees Widest recommended by SMPTE Ideal Seating Area Acceptable Seating Area 12

13 PREMIUM SYSTEM: SOUND PRESSURE LEVEL The maximum sound pressure level (SPL) is determined by the Centre channel speaker. High performance cinemas meet the THX Reference specification of 105dB at the listening positions. The DSP HC speaker can deliver over 105dB to the seating location. SPL > 105dB SPL > 100dB 13

14 PREMIUM SYSTEM: LOUDSPEAKER LAYOUT DSP520 Loudspeaker Side Right DSP Loudspeaker Front Right DSP520 Loudspeaker Rear Right Frontier Projection Screen DSP HC Loudspeaker Centre Barco Orion Cinemascope Projector DSW Subwoofer DSP Loudspeaker Front Left DSP520 Loudspeaker Rear Left DSP520 Loudspeaker Side Left 14

PREMIUM SYSTEM: LEFT, CENTRE & RIGHT Frontier Projection Screen DSP5200.2 Loudspeaker Front Left DSW Subwoofer DSP5200.2 HC Loudspeaker Centre DSP5200.

15 PREMIUM SYSTEM: LEFT, CENTRE & RIGHT Frontier Projection Screen DSP Loudspeaker Front Left DSW Subwoofer DSP HC Loudspeaker Centre DSP Loudspeaker Front Right Premium System: Left, Centre & Right Channels The Left & Right channel audio is produced by Meridian DSP loudspeakers positioned either side of the projection screen. The centre channel audio is produced by a DSP HC loudspeaker positioned below the screen. This can be wall mounted or placed upon a shelf below the screen. The Projection Screen shown is 2700mm wide and has a 2.35:1 screen format. 15

16 PREMIUM SYSTEM: SIDE SPEAKER LAYOUT Frontier Projection Screen DSP520 Loudspeaker Side Channels DSP Loudspeaker Front Left & Right Channels DSP HC Loudspeaker Front Centre Channel DSW (hidden by Speaker) Subwoofer DSP520 Loudspeaker Rear Channels 16

17 PREMIUM SYSTEM: REAR SPEAKER LAYOUT DSP520 Loudspeaker Rear Right DSP520 Loudspeaker Rear Left 17

18 PREMIUM SYSTEM: WIRING DIAGRAM The Meridian Premium Cinema Specification is designed to provide the viewers with an immersive audio visual experience. Audio signal is processed and passed to the loudspeakers by the G65 Surround Controller. The front left and right channels are DSP loudspeakers positioned either side of the projection screen. The centre channel audio is produced by a perfectly matched DSP HC loudspeaker installed below the screen. DSW Subwoofer Additional Subwoofer DSW Subwoofer Video Sources UHD722 HDMI Audio Processor G65 Surround Controller Barco Orion Cinemascope Projector The side & rear channel audio is produced by DSP520 loudspeakers and positioned to create the best coverage within the room. DSP Front Left DSP HC Centre DSP Front Right Low frequency sound is produced by a DSW Subwoofer placed at the front of the room. For more low frequency impact, a second DSW Subwoofer could be added to the system. DSP520 Side Left DSP520 Side Right A Barco Orion Cinemascope projector provides crisp and sharp image to complete the system. DSP520 DSP520 Rear Left Rear Right Located in Room Power socket required SpeakerLink Stereo Analogue Audio Coaxial Digital S/PDIF Point to Point Cat. Cable Non Meridian Equipment Power in wall required 4K HDMI - Audio MMHR Meridian Comms Mono Analogue Audio Mono Balanced Audio Optical Digital S/PDIF USB RS232 Control IR Control Located in Rack 4K HDMI - Video HDMI Passive Speaker Cable Network Connection 12Volt Trigger 18

19 REFERENCE ATMOS THEATRE SYSTEM 19

20 REFERENCE SYSTEM: VIEWING ANGLES Viewing Angles Industry standards set out by THX and SMPTE recommend the following viewing angles: 80 degrees Widest acceptable. May lead to viewer fatigue over long periods 62 degrees Widest recommended by SMPTE 45 degrees Reference viewing angle by THX/SMPTE 36 degrees Narrowest recommended viewing angle by THX 26 degrees Narrowest acceptable viewing angle by THX We would always recommend the 45 degree viewing angle due to it providing the most immersive visual experience 20

REFERENCE SYSTEM: IDEAL SEATING POSITION Seating Area Industry standards set out by THX and SMPTE recommend that the seating area is within a 60 degree arc from the centre of the screen.

21 REFERENCE SYSTEM: IDEAL SEATING POSITION Seating Area Industry standards set out by THX and SMPTE recommend that the seating area is within a 60 degree arc from the centre of the screen. The recommended seating area that is within the following viewing angles is shown by the blue hatched area on the drawing. 60 degrees Widest recommended by SMPTE Ideal Seating Area Acceptable Seating Area 21

22 REFERENCE SYSTEM: SOUND PRESSURE LEVEL The maximum sound pressure level (SPL) is determined by the Centre channel speaker. High performance cinemas meet the THX Reference specification of 105dB at the listening positions. The DSP640 speaker can deliver over 105dB to the seating location. SPL > 105dB SPL > 100dB 22

23 REFERENCE SYSTEM: LOUDSPEAKER LAYOUT DSP320 Loudspeaker Front & Rear Right ATMOS Channels DSP520 Loudspeaker Side Right DSW Subwoofer DSP640 Loudspeaker Front Right DSP520 Loudspeaker Rear Right Frontier Projection Screen DSP640 Loudspeaker Centre Barco Medea Projector DSP640 Loudspeaker Front Left DSP520 Loudspeaker Rear Left DSW Subwoofer DSP520 Loudspeaker Side Left DSP320 Loudspeaker Front & Rear Left ATMOS Channels 23

REFERENCE SYSTEM: LEFT, CENTRE & RIGHT DSP320 Loudspeaker Front ATMOS Channels Frontier Projection Screen DSP640 Loudspeaker Front Left DSP640 Loudspeaker Front Right DSW Subwoofer DSP640 Loudspeaker

24 REFERENCE SYSTEM: LEFT, CENTRE & RIGHT DSP320 Loudspeaker Front ATMOS Channels Frontier Projection Screen DSP640 Loudspeaker Front Left DSP640 Loudspeaker Front Right DSW Subwoofer DSP640 Loudspeaker Centre DSW Subwoofer Reference System: Left, Centre & Right Channels The Left & Right channel audio is produced by Meridian DSP640 loudspeakers positioned behind the screen towards the outside edge of the visible screen area. The centre channel audio is produced by a DSP640 loudspeaker in the middle the screen. The Projection Screen shown is 3200mm wide and has a 2.35:1 screen format. 24

25 REFERENCE SYSTEM: SIDE SPEAKER LAYOUT DSP320 Loudspeaker Side Channels Frontier Projection Screen DSP520 Loudspeaker Side Channels DSP520 Loudspeaker Rear Channels DSW Subwoofer DSP640 Loudspeaker Front Channels 25

26 REFERENCE SYSTEM: SIDE SPEAKER LAYOUT DSP320 Loudspeaker Rear ATMOS Channels DSP520 Loudspeaker Rear Right DSP520 Loudspeaker Rear Left 26

REFERENCE SYSTEM: WIRING DIAGRAM CONTROL NETWORK QNAP (STORAGE) The Meridian Reference 7.4.

Audio signal is processed by an AV Receiver and the signal converted to SpeakerLink by our Meridian 271 Digital Theatre Controller.

27 REFERENCE SYSTEM: WIRING DIAGRAM CONTROL NETWORK QNAP (STORAGE) The Meridian Reference ATMOS Specification builds upon the premium system by upgrading all speakers to our in-wall loudspeaker range. This provides the viewers with the greatest overall in-wall cinema experience. Audio signal is processed by an AV Receiver and the signal converted to SpeakerLink by our Meridian 271 Digital Theatre Controller. This allows Meridian DSP loudspeakers to used with non-meridian AV processors. The AVR can be any manufacturer as long as it has pre-outs in either an Analogue or Digital format. The front channels are DSP640 in-wall loudspeakers positioned behind the screen for a completely hidden solution. APPLE TV SATELLITE BLU-RAY GAMES CONSOLE DSW Subwoofer ATMOS AVR 271 Digital Theatre Controller ROUTER Projector DSW Duplicate Subwoofer The side & rear channel audio is produced by DSP520 loudspeakers positioned to create the best coverage within the room. DSP320 Loudspeakers positioned according to Dolby Atmos guidelines create a deeper and more immersive surround sound experience. DSP640 Front Left DSP640 Centre DSP640 Front Right Low frequency sound is produced by two DSW Subwoofers placed at the front of the room for greater low frequency impact. A Barco Madea 4K UHD projector provides unbelievably crisp and sharp image to complete the system. DSP520 Side Left DSP320 Front Left ATMOS DSP320 Front Right ATMOS DSP520 Side Right DSP520 Rear Left DSP320 Rear Left ATMOS DSP320 Rear Right ATMOS DSP520 Rear Right Located in Room Power socket required SpeakerLink Stereo Analogue Audio Coaxial Digital S/PDIF Point to Point Cat. Cable Non Meridian Equipment Power in wall required 4K HDMI - Audio MMHR Meridian Comms Mono Analogue Audio Mono Balanced Audio Optical Digital S/PDIF USB RS232 Control IR Control Located in Rack 4K HDMI - Video HDMI Passive Speaker Cable Network Connection 12Volt Trigger 27

28 28

29 29

30 30

31 31

32 Image courtesy of Home Theatre of Long Island 32

33 Image courtesy of Home Theatre of Long Island 33

34 34

35 35

36 36

37 37

38 38

39 39

40 40

41 41

42 ROOM ACOUSTIC TREATMENT SIDE RIGHT FRONT SIDE LEFT REAR 42

43 43

44 44

45 45

46 46

47 47

48 48

HR MPC (PDV 25%) O5/2014

meridian-audio.com HR MPC (PDV 25%) O5/2014 CD Player, Processors and Video Projector Reference Audio 808v5 Signature Reference Compact Disc Player Preamplifier 1 105.600 Inputs: 1 x ID41 Digital Media