QUICKCAB. Technical Guide. Standard & Vero carcases QUICKCAB. May. Date of print/release

Transcription

1 Date of print/release May 2018 Technical Guide QUICKCAB QUICKCAB Standard & Vero carcases Please Note: The information shown in this literature is accurate as at the date of print/release shown on such information but it may be subject to changes after such date. Please therefore ensure that you are viewing the most current product available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown. 1

2 IMPORTANT PLEASE NOTE: The information contained in this literature is for illustrative purposes only to assist in choosing your desired kitchen. While we endeavour to keep the information up to date and correct we do not make any representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability and suitability of the doors and products that appear in this literature. We aim to showcase as many different items as possible and therefore some products have been installed and photographed purely to show as many of our product features as possible and they should not be taken as an example of how they are intended to be installed in real kitchen installations. It is therefore the responsibility of the installer to check the corresponding manufacturer s installation information and the manufacturer s technical information to ensure this is up to date and to ensure that the products can be fitted in a way they are displayed and the products are suitable for your requirements. We specifically exclude any liability in this regard unless the products are fitted in accordance with the specifications we supply and the manufacturer s installation recommendations are used in a way recommended by the manufacturer and in accordance with the manufacturer s technical information provided. The information shown in this literature is accurate as at the date of print/release shown on such information but it may be subject to changes after such date. Please therefore ensure that you are viewing the most current product information available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown. We are proud that all our products that we sell are covered by a statutory warranty but this does not stop all our products naturally ageing overtime. As a result of this natural ageing process we are therefore unable to provide an identical colour finish to the existing products you have purchased from us with any products that we supply you from the same product line. In such event our liability will be limited to the purchase price paid for the product you are seeking to replace. Due to the limitations on photographic reproduction, colours may differ slightly from the actual products shown. Please note that board matches listed with the doors are a suggestion only and better board matches may be available on the market. It is up to the individual to decide on its suitability.

3 Quickcab Carcases View Quickcab video here: 2:00 mins Build time SAVE 75% of kitchen cabinet build time* *Based on 7 1/2 minute standard cabinet build time vs 2 minutes build time for Quickcab. SPECIFICATIONS 18mm solid back panel for added rigidity 2mm PVC leading edge for high impact resistance** 100mm cross rail for improved practicality Variable shelf positions for end user convenience (Metal shelf studs) Cam and dowel technology for robust construction 18mm MFC Carcase 150mm Adjustable legs to compensate for uneven floors Pre drilled drawer holes for drawerline, 2 & 3 multidrawer Please Note: All carcases are supplied without drawers. Gables marked for hinges, 100mm centres. ** Quickcab units will have a 2mm leading edge on shelves, except for radius units and curved corner wall and base units, where the radius does not allow this edging to be used. For these items the edging will be 0.8mm ABS tape. All other exposed leading edges will be a 0.4mm melamine edge. 3

4 Quickcab Carcases View Quickcab video here: Base & Tall Units Wall Units 41mm void (base unit only) 560mm Supplied with concealed hangers and plates 519mm (tall unit) 501mm (base unit) 272mm 18mm 18mm 300mm 150mm (adjustable) BASE & TALL UNIT SIZES HEIGHT BACK (solid MFC) Standard Base Unit 720mm 18mm Dresser Unit 1210mm 8mm Larder and Appliance Units 1970mm 8mm Extra Tall Larder and Appl. Units 2150mm 8mm WALL UNIT SIZES HEIGHT BACK (solid MFC) Bridging Unit 360mm 8mm Standard Wall Unit 720mm 8mm Tall Wall Unit 900mm 8mm NB: Centre posts are MFC NB: Centre posts are MFC Available in 4 colours Ivory Stone Grey White Oak Board Colours Ivory: Egger U104 Stone Grey: Egger U727 White: Egger W980 Natural Lancaster Oak: Egger H3368 Prefix Codes When ordering please replace XXX with the prefix code below: Ivory: 183 Stone Grey: 87 White: 184 Oak: 186 Pack contents: Cam & dowel already in place: Simple screwdriver fixing: Feet supplied adjustable: Completed Quickcab base unit: Completed Quickcab wall unit: Simply push panels in position and lock in place with screwdriver. 4

5 Quickcab Carcases View Quickcab video here: Single Base Unit Supplied with an 18mm back Sold as a base cabinet only Drawerline, 2 and 3 drawer unit options possible Drawer packs purchased seperately (nb. 350mm & 450mm boxed drawer packs not available) XXXBASE150 XXXBASE300 XXXBASE350 XXXBASE400 XXXBASE450 XXXBASE500 XXXBASE600 Base unit 150mm Base unit 300mm Base unit 350mm Base unit 400mm Base unit 450mm Base unit 500mm Base unit 600mm Built Under Oven Unit Open back XXXUOH600 Under oven housing 600mm Double Base Unit Supplied with an 18mm back Includes 1 shelf Can be converted to a 2 and 3 drawer unit Sold as a base cabinet only Drawer packs purchased separately Converted to corner base using a blanking panel XXXBASE700 XXXBASE800 XXXBASE900 XXXBASE1000 XXXBLANKPANEL Base unit 700mm Base unit 800mm Base unit 900mm Base unit 1000mm Base blanking panel 720 x 500mm 5

6 Carcase Quickcab Carcases Stock Carcase Details View Quickcab video here: Corner Base Unit Supplied with an 18mm back Includes 1 shelf Opening sizes (incl. gable ends) XXXCBASE900 L corner base 900mm x 900mm Internal Curved Corner Base Unit Supplied with an 18mm back Includes 1 shelf To suit standard internal curved TKC doors XXXINTBASE Internal curve base corner 900 x 900mm External Curved Base Unit Supplied with an 18mm back Includes 1 shelf To suit external curved TKC doors Legs not supplied with curved base unit (legs can be purchased separatley) R186 Standard TKC radius Cartmel radius XXXRADIUS XXXRADIUSCART 183DENTONRADIUS XXXBASE260 Radius unit Cartmel radius unit Denton radius unit - ivory only Base unit 260mm (300mm deep)* R168 Denton radius * for use with radius unit R243 6

7 Carcase Quickcab Carcases Stock Carcase Details View Quickcab video here: Appliance Unit / Extra Tall Appliance Unit Height: 1970mm / 2150mm Multi purpose unit Supplied with gable ends and a shelf pack Includes top and bottom, 3 fixed shelves and 1 floating shelf XXXTALL600 XXXTTALL600 Appliance unit 600mm (1970mm tall) Extra tall appliance 600mm (2150mm tall) Fridge Freezer Unit Double Oven Housing Unit Larder Unit Height: 1970mm Includes top and bottom, 3 fixed shelves and 1 floating shelf XXXLARDER300 XXXLARDER400 XXXLARDER500 XXXLARDER600 Larder 300mm Larder 400mm Larder 500mm Larder 600mm Extra Tall Larder Unit Height: 2150mm Includes top and bottom, 3 fixed shelves and 1 floating shelf XXXTLARDER300 XXXTLARDER400 Extra tall larder 300mm Extra tall larder 400mm XXXTLARDER500 Extra tall larder 500mm Please note: For Extra tall larder 600mm use Extra Tall Appliance Unit (code: XXXTTALL600) 7

8 Quickcab Carcases View Quickcab video here: Dresser Unit Height: 1210mm 2 drawer dresser unit (nb. this unit cannot be used for 1 drawer configurations) Drawers sold separately Includes 1 shelf XXXDRESS500 XXXDRESS600 Dresser 500mm (1210mm tall) Dresser 600mm (1210mm tall) 1970mm External Curved Unit Height: 1970mm Supplied with an 18mm back Includes 5 shelves Use with 1 x 1245mm & 1 x 720mm tall external curved TKC doors XXXETRADIUS 1970mm tall radius unit XXXETRADIUSCART 1970mm tall Cartmel radius unit XXXETBASE260 * for use with 1970mm tall radius unit 1970mm tall 260mm base unit* 1970mm tall radius unit 1970mm tall 260mm base unit R186 R168 Standard TKC radius Cartmel radius Single Wall Unit Includes 2 shelves XXXWALL300 XXXWALL350 XXXWALL400 XXXWALL450 XXXWALL500 XXXWALL600 Wall unit 300mm Wall unit 350mm Wall unit 400mm Wall unit 450mm Wall unit 500mm Wall unit 600mm 8

9 Quickcab Carcases View Quickcab video here: Double Wall Unit Includes 2 shelves & centrepost XXXWALL700 XXXWALL800 XXXWALL900 XXXWALL1000 Wall unit 700mm Wall unit 800mm Wall unit 900mm Wall unit 1000mm L Shaped Corner Wall Unit Includes 2 shelves Opening sizes (incl. gable ends) XXXCWALL600 L corner wall 600 x 600mm Splay Corner Wall Unit / Tall Splay Corner Wall Unit / 900mm Includes 2 shelves XXXDWALL600 XXXTDWALL600 Splay corner wall unit 600 x 600mm (720mm tall) Tall splay corner wall unit 600 x 600mm (900mm tall) Suitable for a 396mm (w) door 9

10 Quickcab Carcases View Quickcab video here: Internal Curved Corner Wall Unit Includes 2 shelves To suit standard internal curved TKC doors XXXINTWALL Internal curved wall corner 600 x 600mm Single Bridging Unit Height: 360mm XXXBRIDGE500 XXXBRIDGE600 Bridging unit 500mm Bridging unit 600mm Double Bridging Unit Height: 360mm XXXBRIDGE800 XXXBRIDGE900 XXXBRIDGE1000 Bridging unit 800mm Bridging unit 900mm Bridging unit 1000mm 10

11 Quickcab Carcases View Quickcab video here: External Curved Wall Unit / Tall External Curved Wall Unit / 900mm Includes 1 shelf (720mm) / 2 shelves (900mm) To suit external curved TKC doors R186 Standard TKC radius XXXRADIUS XXXRADIUSCART 183DENTONRADIUS XXXTRADIUS XXXTRADIUSCART Radius unit (720mm tall) Cartmel radius unit (720mm tall) Denton radius unit (720mm tall) - ivory only Tall radius unit (900mm tall) Cartmel tall radius unit (900mm tall) R168 Cartmel radius Denton radius R243 Tall Single Wall Unit Height: 900mm Includes 2 shelves XXXTWALL300 XXXTWALL400 XXXTWALL450 XXXTWALL500 XXXTWALL600 Tall wall unit 300mm Tall wall unit 400mm Tall wall unit 450mm Tall wall unit 500mm Tall wall unit 600mm Tall Double Wall Unit Height: 900mm Includes 2 shelves & centrepost XXXTWALL800 XXXTWALL900 XXXTWALL1000 Tall wall unit 800mm Tall wall unit 900mm Tall wall unit 1000mm 11

12 Quickcab Carcases View Quickcab video here: Belfast Base Unit (for use with Belfast sink) Height: 455mm / 495mm Width: 600mm Supplied with an 18mm back 455mm unit for use with 450 x 596mm door 495mm unit for use with 490 x 596mm door XXXBELFAST455 XXXBELFAST495 Belfast base unit, 455mm tall Belfast base unit, 495mm tall SMARTLARDER Complete Height: 1970mm Includes 1 fixed shelf & 5 ready to install drawers Soft closing drawers Dynamic load capacity: 40kg/drawer Cabinet finish: Available in all 4 Quickcab colours - Stone Grey, Oak, White & Ivory Drawer finish: Grey Pack Contents: 1 x Larder Unit, 1970mm high 1 x Topslide shallow boxed drawer, 83mm 1 x Topslide internal bracket, 83mm 4 x Topslide boxed pan drawers, 224mm 4 x Topslide internal brackets, 224mm 4 x Glass conversion kits 3 x Topslide internal fascia panels, 1100mm length 2 x Topslide front rails, 1100mm length 4 x Silence 165 degree soft close hinges 4 x Silence Euro hinge plates 18mm Fascia panel cutting dimensions: Internal cabinet width - 97mm Front rail cutting dimensions: Internal cabinet width - 63mm XXXSL50G XXXSL60G SMARTLARDER complete unit 500mm SMARTLARDER complete unit 600mm 12

13 Quickcab Carcases View Quickcab video here: Corner Base Unit Details 1000mm base unit with a 500mm blanking panel. For use with a 446mm (w) door. 1000mm base unit with a 500mm blanking panel. For use with a 496mm (w) door. NOTE: Blanking panel can be cut to size NOTE: Blanking panel can be cut to size 1000mm base unit with a 500mm blanking panel. For use with a 596mm (w) door. 800mm base unit with a 500mm blanking panel. For use with a 396mm (w) door. NOTE: Blanking panel can be cut to size NOTE: Blanking panel can be cut to size 800mm base unit with a 500mm blanking panel. For use with a 446mm (w) door. 800mm base unit with a 500mm blanking panel. For use with a 496mm (w) door. NOTE: Blanking panel can be cut to size NOTE: Blanking panel can be cut to size 13

14 Quickcab Carcases View Quickcab video here: Corner Base Unit Details 800mm base unit with a 500mm blanking panel. For use with a 596mm (w) door. Corner base unit, 900 x 900mm. For use with 2 x 715mm (h) x 313mm (w) doors. Use 170 degree and pie cut hinges when connecting the doors. NOTE: Blanking panel can be cut to size Corner Wall Unit Details L shaped corner wall unit, 600 x 600mm. For use with 2 x 715mm (h) x 273/277mm (w) doors. Use 170 degree and pie cut hinges when connecting the doors. Splay corner wall unit, 600 x 600mm. For use with a 715mm (h) x 396mm (h) door. Use 45 degree hinges. 14

15 Quickcab Carcases View Quickcab video here: External Curved Wall / Base Unit Details Product Information Radius carcase to be used with standard TKC external curved doors. For use on a wall or as a feature base. Carcase heights available: 720 / 900 / 1970mm 720mm : XXXRADIUS 900mm : XXXTRADIUS 1970mm : XXXETRADIUS 260mm Base Unit Details Product Information 260mm base carcase for use behind radius unit on the end of a kitchen run. Carcase heights available: 720mm / 1970mm 720mm : XXXBASE mm : XXXETBASE mm unit for use with 715 x 256mm door. 1970mm unit for use with 1245 x 256mm door and 715mm x 256mm door. Double External Curved Wall / Base Unit Details Product Information 2 x carcases to be used together with two curved doors. Carcase height: 720 / 900 / 1970mm For use on an island unit or on the wall. 720mm : XXXRADIUS 900mm : XXXTRADIUS 1970mm : XXXETRADIUS 15

16 Quickcab Carcases View Quickcab video here: Denton External Curved Wall / Base Unit Details Product Information Radius carcase to be used with Denton external curved doors ONLY. For use on a wall or as a feature base. Carcase height: 720mm : 183DENTONRADIUS Cartmel External Curved Wall / Base Unit Details Product Information Radius carcase to be used with Cartmel external curved doors ONLY. For use on a wall or as a feature base. Carcase heights available: 720 / 900 / 1970mm 720mm : XXXRADIUSCART 900mm : XXXTRADIUSCART 1970mm : XXXETRADIUSCART 16

17 Quickcab Carcases View Quickcab video here: Internal Curved Corner Base Unit Details Product Information For use as a standard base 900 x 900 corner. To be used with internal curved base doors. Carcase height: 720mm Includes 1 shelf and carcase legs. Use 170 degree hinges with the doors. : XXXINTBASE Internal Curved Corner Wall Unit Details Product Information For use as a standard wall 600 x 600 corner. To be used with internal curved wall doors Carcase height: 720mm Includes 2 shelves. Use 170 degree hinges with the doors. : XXXINTWALL 17

18 Vero Quickcab Carcases View Vero Quickcab videos here: QUICKCAB for Vero handleless rail system Available on a working day lead time. IVORY STONE GREY WHITE Prefix code: 383 Prefix code: 387 Prefix code: 384 Board Colour: Egger U104 Board Colour: Egger U727 Board Colour: Egger W980 Please Note: The colour prefix codes for Vero Quickcab are different to the codes used for standard Quickcab carcases. 2:00 mins Build time SAVE 75% of kitchen cabinet build time* *Based on 7 1/2 minute standard cabinet build time vs 2 minutes build time for Quickcab. 18

19 Vero Quickcab Carcases View Vero Quickcab videos here: Vero Base Unit 41mm service void Vero 2/3 Drawer Unit 41mm service void Vero Wall Unit 560mm 501mm 560mm 272mm 501mm 300mm 150mm (adjustable) Top section pre-routered for Vero profiles Pre-drilled holes for quick fix brackets 150mm (adjustable) Top and mid sections pre-routered for Vero profiles Pre-drilled holes for quick fix brackets Base panel set back 20mm & groove routered for Vero profile 20mm Vero Larder & Appliance Units Additional Vero Cabinet Features 'Single gable' unit 'Double gable' unit Gables marked for hinges, 100mm centres Silence hinges included with all cabinets 20mm 20mm 20mm All carcases have 2mm PVC leading edge Pre-drilled holes for drawer runners on 2/3 drawer units Wall units supplied with concealed hangers and plates BASE, LARDER & APPLIANCE UNIT SIZES HEIGHT BACK (solid MFC) 519mm 519mm Standard Base Unit 720mm 18mm Larder & Appliance Units 1970mm 8mm Extra Tall Larder & Appliance Units 2150mm 8mm WALL UNIT SIZES HEIGHT BACK (solid MFC) Bridging Unit 360mm 8mm Standard Wall Unit 720mm 8mm 560mm 150mm (adjustable) 560mm 150mm (adjustable) Tall Wall Unit 900mm 8mm Cabinet gable set back 20mm on one side for Vero profile Cabinet gables set back 20mm on both sides for two Vero profiles 19

20 Vero Quickcab Carcases View Vero Quickcab videos here: Vero Single Base Unit Supplied with an 18mm back Top section pre-routered to accommodate Vero top profile Pre-drilled holes for quick fix brackets XXXVBASE150 XXXVBASE300 XXXVBASE350 XXXVBASE400 XXXVBASE450 XXXVBASE500 XXXVBASE600 Vero base unit 150mm Vero base unit 300mm Vero base unit 350mm Vero base unit 400mm Vero base unit 450mm Vero base unit 500mm Vero base unit 600mm Vero Built Under Oven Unit Same design as standard Quickcab under oven housing unit XXXVUOH600 Vero under oven housing 600mm Vero Double Base Unit Supplied with an 18mm back Includes 1 shelf & a centre post Top section pre-routered to accommodate Vero top profile Pre-drilled holes for quick fix brackets Converted to corner base using a blanking panel XXXVBASE700 XXXVBASE800 XXXVBASE900 XXXVBASE1000 XXXVBLANK Vero base unit 700mm Vero base unit 800mm Vero base unit 900mm Vero base unit 1000mm Vero base blanking panel 720 x 500mm 20

21 Vero Quickcab Carcases View Vero Quickcab videos here: Vero L Shaped Corner Base Unit Supplied with an 18mm back Includes 1 shelf Top section pre-routered to accommodate Vero top profile. Pre-drilled holes for quick fix brackets Opening sizes (incl. gable ends) XXXVCBASE900 Vero L shaped corner base 900 x 900mm Vero 2/3 Drawer Single Base Unit Supplied with an 18mm back Top and mid sections pre-routered to accommodate Vero top and mid profiles Suitable for 2 and 3 drawers Drawer packs purchased separatley Pre-drilled holes for quick fix brackets XXXVDBASE500 XXXVDBASE600 Vero 2/3 drawer base unit 500mm Vero 2/3 drawer base unit 600mm Vero 2/3 Drawer Double Base Unit Supplied with an 18mm back Top and mid sections pre-routered to accommodate Vero top and mid profiles Suitable for 2 and 3 drawers Drawer packs purchased separatley Pre-drilled holes for quick fix brackets XXXVDBASE800 XXXVDBASE900 XXXVDBASE1000 Vero 2/3 drawer base unit 800mm Vero 2/3 drawer base unit 900mm Vero 2/3 drawer base unit 1000mm 21

22 Vero Quickcab Carcases View Vero Quickcab videos here: Vero Single Wall Unit Includes 2 shelves Base panel set back with 20mm and groove routered to accommodate Vero wall profile XXXVWALL300 XXXVWALL350 XXXVWALL400 XXXVWALL450 XXXVWALL500 XXXVWALL600 Vero wall unit 300mm Vero wall unit 350mm Vero wall unit 400mm Vero wall unit 450mm Vero wall unit 500mm Vero wall unit 600mm Vero Double Wall Unit Includes 2 shelves Base panel set back with 20mm and groove routered to accommodate Vero wall profile Supplied with centrepost and L bracket to secure centre post into Vero wall profile XXXVWALL700 XXXVWALL800 XXXVWALL900 XXXVWALL1000 Vero wall unit 700mm Vero wall unit 800mm Vero wall unit 900mm Vero wall unit 1000mm Vero Tall Single Wall Unit Height: 900mm Includes 2 shelves Base panel set back with 20mm and groove routered to accommodate Vero wall profile XXXVTWALL300 XXXVTWALL400 XXXVTWALL450 XXXVTWALL500 XXXVTWALL600 Vero tall wall unit 300mm Vero tall wall unit 400mm Vero tall wall unit 450mm Vero tall wall unit 500mm Vero tall wall unit 600mm 22

23 Vero Quickcab Carcases View Vero Quickcab videos here: Vero Tall Double Wall Unit Height: 900mm Includes 2 shelves Base panel set back with 20mm and groove routered to accommodate Vero wall profile Supplied with centrepost and L bracket to secure centre post onto Vero wall profile XXXVTWALL800 XXXVTWALL900 XXXVTWALL1000 Vero tall wall unit 800mm Vero tall wall unit 900mm Vero tall wall unit 1000mm Vero L Shaped Corner Wall Unit Includes 2 shelves Base panel set back with 20mm and groove routered to accommodate Vero wall profile Opening sizes (incl. gable ends) XXXVCWALL600 Vero L corner wall 600 x 600mm Vero Splay Corner Wall Unit Includes 2 shelves Base panel set back with 20mm and groove routered to accommodate Vero wall profile XXXVDWALL600 Vero splay corner wall 600 x 600mm Suitable for a 396mm (w) door 23

24 Vero Quickcab Carcases View Vero Quickcab videos here: Vero Tall Splay Corner Wall Unit Height: 900mm Includes 2 shelves Base panel set back with 20mm and groove routered to accommodate Vero wall profile XXXVTDWALL600 Vero tall splay corner wall 600 x 600mm Suitable for a 396mm (w) door Vero Single Bridging Unit Height: 360mm Base panel set back with 20mm and groove routered to accommodate Vero wall profile XXXVBRIDGE500 XXXVBRIDGE600 Vero bridging unit 500mm Vero bridging unit 600mm Vero Double Bridging Unit Height: 360mm Base panel set back with 20mm and groove routered to accommodate Vero wall profile XXXVBRIDGE800 XXXVBRIDGE900 XXXVBRIDGE1000 Vero bridging unit 800mm Vero bridging unit 900mm Vero bridging unit 1000mm 24

25 Vero Quickcab Carcases View Vero Quickcab videos here: Vero Larder / Appliance Ends - Single Gable Height: 1970mm Includes two 18mm ends and one 8mm back Shelf pack not included and needs to be purchased separately. Front of cabinet set back by 20mm on one side to accommodate intermediate or lateral vertical Vero profiles. Universal design, can be used for either right hand or left hand units. Please note, a 35mm space in between two larder units is required to mantain the void created by the vertical profile trim. One side set back 20mm XXXVTALLEND300S XXXVTALLEND400S XXXVTALLEND500S XXXVTALLEND600S Vero larder ends & back - single gable 300mm Vero larder ends & back - single gable 400mm Vero larder ends & back - single gable 500mm Vero larder/appliance ends & back - single gable 600mm Vero Extra Tall Larder / Appliance Ends - Single Gable Height: 2150mm Includes two 18mm ends and one 8mm back Shelf pack not included and needs to be purchased separately. Front of cabinet set back by 20mm on one side to accommodate intermediate or lateral vertical Vero profiles. Universal design, can be used for either right hand or left hand units. Please note, a 35mm space in between two larder units is required to mantain the void created by the vertical profile trim. One side set back 20mm XXXVTTALLEND300S XXXVTTALLEND400S XXXVTTALLEND500S XXXVTTALLEND600S Vero extra tall larder ends & back - single gable 300mm Vero extra tall larder ends & back - single gable 400mm Vero extra tall larder ends & back - single gable 500mm Vero extra tall larder/appliance ends & back - single gable 600mm 25

26 Vero Quickcab Carcases View Vero Quickcab videos here: Vero Larder / Appliance Ends - Double Gable Height: 2150mm Includes two 18mm ends and one 8mm back Shelf pack not included and needs to be purchased separately. Front of cabinet set back by 20mm on both sides to accommodate intermediate vertical Vero profiles on both sides, for a symmetrical look when using 3 larders or more. Please note, a 35mm space in between two larder units is required to mantain the void created by the vertical profile trim. Set back 20mm Set back 20mm XXXVTALLEND300D XXXVTALLEND400D XXXVTALLEND500D XXXVTALLEND600D Vero larder ends & back - double gable 300mm Vero larder ends & back - double gable 400mm Vero larder ends & back - double gable 500mm Vero larder/appliance ends & back - double gable 600mm Vero Extra Tall Larder / Appliance Ends - Double Gable Height: 2150mm Includes two 18mm ends and one 8mm back Shelf pack not included and needs to be purchased separately. Front of cabinet set back by 20mm on both sides to accommodate intermediate vertical Vero profiles on both sides, for a symmetrical look when using 3 larders or more. Please note, a 35mm space in between two larder units is required to mantain the void created by the vertical profile trim. Set back 20mm Set back 20mm XXXVTTALLEND300D XXXVTTALLEND400D XXXVTTALLEND500D XXXVTTALLEND600D Vero extra tall larder ends & back - double gable 300mm Vero extra tall larder ends & back - double gable 400mm Vero extra tall larder ends & back - double gable 500mm Vero extra tall larder/appliance ends & back - double gable 600mm 26

27 Vero Quickcab Carcases View Vero Quickcab videos here: Shelf Pack for Vero Larder / Appliance Unit Includes 6 shelves: 1 x top shelf, 1 x bottom shelf, 3 x fixed shelves & 1 x floating shelf. Shelf packs are required in addition to the Vero larder / appliance ends & backs in order to create a complete Vero larder or appliance unit. XXXVTALL300SP XXXVTALL400SP XXXVTALL500SP XXXVTALL600SP Shelf pack for Vero larder unit 300mm Shelf pack for Vero larder unit 400mm Shelf pack for Vero larder unit 500mm Shelf pack for Vero larder/appliance unit 600mm 27

28 Vero Quickcab Carcases View Vero Quickcab videos here: Vero Corner Base Details 1000mm Vero base unit with a 500mm blanking panel. For use with a 446mm (w) door. 1000mm Vero base unit with a 500mm blanking panel. For use with a 496mm (w) door. NOTE: Blanking panel can be cut to size NOTE: Blanking panel can be cut to size 1000mm Vero base unit with a 500mm blanking panel. For use with a 596mm (w) door. 800mm Vero base unit with a 500mm blanking panel. For use with a 396mm (w) door. NOTE: Blanking panel can be cut to size NOTE: Blanking panel can be cut to size 800mm Vero base unit with a 500mm blanking panel. For use with a 446mm (w) door. 800mm Vero base unit with a 500mm blanking panel. For use with a 496mm (w) door. NOTE: Blanking panel can be cut to size NOTE: Blanking panel can be cut to size 28

29 Vero Quickcab Carcases View Vero Quickcab videos here: Vero Corner Base Unit Details 800mm Vero base unit with a 500mm blanking panel. For use with a 596mm (w) door. Vero corner base unit, 900 x 900mm. For use with 2 x 715mm (h) x 313mm (w) doors. Use 170 degree and pie cut hinges when connecting the doors. NOTE: Blanking panel can be cut to size Vero Corner Wall Unit Details Vero L shaped corner wall unit, 600 x 600mm. For use with 2 x 715mm (h) x 273/277mm (w) doors. Use 170 degree and pie cut hinges when connecting the doors. Vero splay corner wall unit, 600 x 600mm. For use with a 715mm (h) x 396mm (w) door. Use 45 degree hinges. 29

30 Contact us Telephone Fax Web Address Unit 3 Cranberry Drive Denton Manchester M34 3UL Area Sales Scotland North East Yorkshire North West Merseyside & North Wales East Midlands West Midlands South West & South Wales London & Home Counties (North) London & Home Counties (South) Northern Ireland All goods are sold subject to our Terms and Conditions of Sale which are available upon request. 30