Sunshine Coast Open Space Landscape Infrastructure Manual

Transcription

1 Sunshine Coast Open Space Landscape Infrastructure Manual Skate Parks Information Sheet () 1.0 Overview Location Performance criteria Sustainability Recommended standards Embellishment guidance Positioning guidance Equal access guidance Project management and maintenance Also see: Technical Drawings Specifications (DWGS) (SPECS) Embellishments August

2 1.0 Overview This category of the LIM has been developed to provide guidance for the design and construction of skate parks. This category addresses the following: Design Elements Auxiliary facilities. Important notes: This resource does not try to replicate all of the provisions of Legislation, Australian Standards (AS) and corporate documentation in words and pictures, nor does it seek to define their requirements. It aims to draw attention to the fact that effectively applied technical requirements translate into desirable qualities for end users. Please refer to the relevant authority websites for updated information and current document distribution dates. These documents are subject to amendments from time to time. Product design, manufacture and installation require an appropriately qualified professional to provide site specific solutions. For further guidance see: LIM Preliminaries LIM Shelters LIM Shade Sails. Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 2

3 2.0 Location The Sunshine Coast Environment and Liveability Strategy 2017 currently prescribes that skate parks may be located in the following open space types, as indicated per table below: Table 1: Type of open space ELS LIM Embellishments Skate parks Council-wide Recreation parks District Recreation Landscape Sport Trails Environmental reserves Local Amenity reserves Linear parks Landscape corridors Skate parks Please note See Sunshine Coast Skate and BMX Plan for detailed location guidance across the region Civic Sports grounds Council-wide District Specific purpose Recreation trails Conservation reserves Nature reserves Bushland reserves Natural amenity reserves Coastal reserves Further technical information for Sport, Trails and Environmental reserves will be incorporated at a later date. In the interim, the basic Recreation / Landscape information can be adapted to suit the site specific solution required. Please note The design and construction of coastal and waterways infrastructure is to be consistent with adjacent open space land usage. The design and construction of recreation trails infrastructure is to be consistent with adjacent open space land usage or any endorsed SCC document (e.g. Coastal Pathway Master Plan) It is expected that council s open space documents will be reviewed from time to time and this table may be subject to change. LEGEND - Environment and Liveability Strategy (ELS) may be suitable based on-site assessment not suitable key locations / trail head only where adjacent to coast or waterway T W Broad strategic direction LEGEND - Open Space Landscape Infrastructure Manual (LIM) suitable not suitable suitable dependant on appropriate location (refer SC Recreation Park Plan for further details on how to determine appropriateness) Specific site based direction Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 3

4 3.0 Performance criteria The following performance criteria must be considered in order for the embellishment to provide a best practice solution. Design of skate parks must meet the following criteria: comply with relevant legislation, standards and corporate documentation (including positioning and equal access guidance). designed by professional skate park designers in consultation with users. designed to cater for different skill and ability levels. sited to prevent noise pollution in residential areas. include covered / shaded areas. Skate park elements must meet the following criteria: comply with relevant legislation, standards and corporate documentation (including positioning and equal access guidance). made from robust materials that are vandal and corrosion resistant (particularly in coastal areas). durable life span, typical useful life 30 years. 1 have smooth skating surfaces. well drained. low maintenance. 1 Sunshine Coast Council Asset Management Plan 2012, Parks and Gardens Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 4

5 4.0 Sustainability To attain strategic sustainability the following principles should be considered where suitable: Materials and products Local materials and local products. Material selection should be based on recycled or recyclable material wherever possible. Metals / plastics that can be: recycled at the end of productive life used in a buy back scheme. Finishes / treatments / products that are the least harmful to the environment and park users. Ensure materials are flame retardant and resistant to fire. Consider maintenance, whole of life costing and aesthetic values. Materials which initially cost more can result in reduced future maintenance costs and / or longer useful life. Made from robust materials that are vandal and corrosion resistant (particularly in coastal areas). Where timber is not in frequent and intimate contact by the public, treatment by chemical preservative application of CCA (chromated copper arsenate) is preferred, alternatively ACQ (alkaline copper quaternary). Install erosion and sediment control products and practices such as mulching to reduce erosion on excavated areas during construction. Tree and vegetation management Protect existing trees by using tree root sensitive design and / or appropriate setbacks to ensure the ongoing provision of shade and amenity. Protect existing trees from damage during project delivery to ensure continued environmental benefits such as oxygen production, temperature control, flood mitigation and stormwater filtration. Plant new trees to provide additional shade in the future as well as successional tree population. Plan to incorporate all relevant design guidelines at the design stage of a project. This will reduce the need for premature vegetation losses as a result of conflict or ongoing costly maintenance to maintain clearances. Plan to select species tolerant to the local conditions at the design phase and choose quality specimens at the project delivery phase to minimise early losses and reduce ongoing maintenance. Ensure new plantings are appropriately setback from infrastructure. This will reduce long-term maintenance requirements and maximise the longevity of plantings. Planning for future works Co-locate similar embellishments to reduce infrastructure such as water use facilities and underground services. Consider climate change impacts on embellishment location and construction. In coastal areas, design should consider rise in sea level predictions and severe storm events. See Sunshine Coast Environment and Liveability Strategy 2017 for further guidance. Positioning should consider flooding, seasonal/ ephemeral water bodies and water table changes. As a sustainable approach, install conduits under concrete slabs for future provision where electrical services are planned. Where conduit is installed for future electrical installations, set brass markers to concrete slab edges to indicate the location. Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 5

6 5.0 Recommended standards Embellishment design, manufacture and installation require an appropriately qualified professional to provide site specific solutions. Where Australian Standards or part thereof have been adopted by legislation, they are a legal requirement. Embellishments should conform to the following requirements, including but not limited to: LIM Preliminaries See LIM Preliminaries for further guidance on overarching categories, such as: Cultural Heritage Health and Safety Environmental Management Vegetation Management. LIM Introduction and Design Principles See LIM Introduction and Design Principles for other overarching core documents, such as: Legislation Australian Standards / industry guidelines Approvals / authorised person Corporate documents. Legislation International legislation The United Nations (UN) Convention on the Rights of Persons with Disabilities. Recognises the inherent dignity and worth and the equal and inalienable rights of all members of the human family. The United Nations (UN) Convention on the Rights of the Child. Applies to all children, whatever their race, religion or abilities. No child can be treated unfairly on any basis. National legislation Disability Discrimination Act (DDA) Provides protection for everyone in Australia against disadvantage based upon disability. Disability discrimination happens when people with a disability are treated less fairly than people without a disability. Access to skate parks falls under the definition of premises (DDA Section 4). Queensland legislation Aboriginal Cultural Heritage Act The main purpose of this Act is to provide effective recognition, protection and conservation of Aboriginal cultural heritage. Anti-Discrimination Act 1991 (ADAQ Section 46). To promote equality of opportunity for everyone and to protect them from unfair discrimination. Access to skate parks falls under the provision of services. Local Government Act 2009 (LGA) and regulations. Provides for the extent and nature of local government responsibilities and powers. Queensland Building and Construction Act 1991 (QBCC Act) Regulates the building industry ensuring proper standards and remedies for defective building works. Planning Act 2016 established the framework for Queensland s planning system and provides the foundation for elements such as plan-making, development assessment and dispute resolution. Tobacco and Other Smoking Products Act 1998 and regulation. To improve the health of members of the public by reducing their exposure to tobacco and other smoking products. Work Health and Safety Act 2011 and regulations e.g. Work Health and Safety Regulation To provide comprehensively for work health and safety. Designers have a duty of care to comply with, and to ensure, as far as is reasonably practical, that the design is without risks to health and safety. Please note: Please refer to the relevant authority websites for updated information and current document distribution dates. These documents are subject to amendments from time to time. Building Act 1975 and regulations e.g. Building Regulation Governs all building work in Queensland and empowers the regulation of certain aspects of buildings and structures. Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 6

7 Australian Standards / industry guidelines National Construction Code (NCC) Taps and drinking fountains Skate parks AS 3600:2009 Concrete Structures provides nationally accepted rules for the design and detailing of concrete structures, members and footings. AS 1379:2007 Specification and Supply of Concrete sets out minimum requirements for materials, plant and equipment used in the supply of concrete and the testing of concrete. AS :2002 Structural Design Actions Permanent, imposed and other actions for permanent, imposed, static liquid pressure, ground water, rainwater ponding and earth pressure actions to be used in the limit state design of structures and parts of structures AS :2011 Structural Design Actions Wind actions Actions. Procedures for determining wind speeds and actions to be used in the design of structures. AS :2007 Structural Design Actions Earthquake Actions in Australia. Procedures for determining earthquake actions and detailing requirements for structures and components to be used in the design of structures. AS / NZ :1994 Slip Resistance of Pedestrian Surfaces Guide to the reduction of slip hazards. AS 4586:2013 Slip Resistance classifications of New Pedestrian Surface Materials. Testing of new products and floors. This Standard is referenced in legislation. Where building / plumbing approval is required, or the embellishment is self assessable, it must comply with the NCC (current edition): Signage Volume 1 and 2 Building Code of Australia (BCA) (current edition) are a uniform set of technical provisions for the design and construction of buildings and other structures throughout Australia. Volume 3 Plumbing Code of Australia (PCA) pertains primarily to plumbing and drainage for all classes of buildings. Building approval under the Building Code Australia (BCA) (current edition) is required for a sign and supporting structure where: BSA licensed builder (restricted to special structures). In Queensland, individuals and companies must hold a Queensland Building and Construction Commission (QBCC) license to carry out the installation of supporting structures for signs where: a supporting structure for a sign is defined as a structure, the main purpose of which is to display the sign and includes any structure that is attached to, or suspended from a building to allow a sign to be displayed. The sign supporting structure is: valued at or in excess of $5,000 and the top of the sign or supporting structure is 3.0m or more above the surface immediately below the sign. A maintenance tap and drinking fountain is required at or near a skate park. See the following for further guidance: LIM Drinking Fountains LIM Taps. Designing for shade Creating Shade at Public Facilities Policy and Guidelines for Local Government Queensland Health Promotion Council, Queensland University of Technology, Local Government Association of Queensland and Australian Institute of Environmental Health, Edition 2. Technical resource containing guidelines about essential and preferred quantities of shade at public facilities. Building certification is required for all shelters and shade sails. The contractor installing them is to organise a private certifier as part of the contract. See the following LIM categories for further guidance: LIM Shade Sails LIM Shelters. Designing for access and inclusion AS 1428 Set Design for Access and Mobility. Design requirements for new building work to provide access for people with disabilities. This Standard is reference in legislation. Install skate park user liability sign see LIM Signage for further guidance. Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 7

8 Designing for safety Approvals / authorised person Taps and drinking fountains Queensland Government Crime Prevention through Environmental Design (CPTED) Guidelines for Queensland, Provides guidelines about designing a safe environment to assist in the prevention of the opportunity for crime. See the following for additional safety guidance: Legislation Work Place Health and Safety Act LIM Preliminaries General Health and Safety. Other AS 4373:2007 Pruning of Amenity Trees. Specifies methods for pruning trees and gives guidance on correct and uniform practices. AS 4970:2009 Protection of Trees on Development Sites. Provides guidance on the principles for protecting trees on land subject to development. Assessable development Where elements of a skate park are considered assessable development, building approval is required from a private building certifier and must meet all of the requirements of the Building Regulation 2006, the Building Code of Australia (current edition) and the Sunshine Coast Planning Scheme Building Code of Australia (BCA) Volumes 1 and 2 are a uniform set of technical provisions for the design and construction of buildings and other structures throughout Australia. Other associated embellishments may require building approval, please see relevant LIM categories for advice: The following are classified as non-habitable buildings under the BCA, including but not limited to: car parking. entire path connection to buildings / toilets (from car park to the building itself). toilets (including accessible and ambulant). ramps and stairs. walls, fences, flagpoles (masts), sheds. tactiles. Skate park design Skate parks must be designed by an experienced professional skate park designer in consultation with users and certified by a suitably qualified engineer. All plumbing is regulated by council under state government legislation requirements. See the following for further guidance: LIM Drinking Fountains LIM Taps. Coastal management district Ensure appropriate environmental approvals are obtained and the conditions observed where any building work is proposed in the Coastal Management District. Consult with Queensland Government Department of State Development, Infrastructure and Planning (DSDIP) State Assessment and Referral Agency (SARA) for application forms, guidelines and information sheets. Other Ensure all relevant approvals are obtained from the appropriate governing bodies and all conditions are observed. Department of Transport and Main Roads (DTMR) approval is required for works near state controlled roads. This applies to any part of the road reserve including footpath, kerb and channelling, nature strip and traffic island. Footing design for skate parks is to be designed by a suitably qualified engineer. Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 8

9 SC Council additional requirements Corporate liaison Corporate documents Sunshine Coast Planning Scheme 2014 provides guidance and technical advice for development. Sunshine Coast Environment and Liveability Strategy 2017 sets guiding principles, an implementation plan and technical detail to address; the natural environment, population growth, climate change, renewable energy, create liveable spaces and fulfil expectations of future generations. Sunshine Coast Social Strategy 2015 aims to maintain the community s high perceptions and levels of safety. It also promotes wellbeing and ensures an older population is supported and provided for. Sunshine Coast Skate and BMX Plan Skate parks are to be developed in line with this council endorsed plan. Sunshine Coast Access and Inclusion Plan and Sunshine Coast Council Access and Inclusion Policy, 5 Oct 2011 to guide the establishment and implementation of access and inclusion and promote social justice and social inclusion. The aim is to reduce barriers to civic and community participation. Sunshine Coast Positive Ageing Strategy addresses the changing needs of older people on the Sunshine Coast. Smart City Implementation Program (Draft) lays out a structure, program of works and deliverables for the implementation of the Smart City Framework into Council projects, systems and processes. Sunshine Coast Manual for Erosion and Sediment Control (V1.2) Nov 2008 a manual that focuses on land clearing, civil works and allotment building. Developer delivered assets SCC Development Services all works associated with any development application. Council delivered assets SCC Parks and Gardens recreation parks, amenity reserves, linear parks, landscape corridors, sports grounds and recreation trails enquiries relating to asset management and business planning and direction. SCC Design and Placemaking Services recreation parks, amenity reserves, linear parks, landscape corridors, sports grounds and recreation trails and streetscape / centres enquiries relating to design. SCC Environmental Operations recreation trails, foreshore infrastructure, environment reserves, constructed waterbodies and wetlands. Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 9

10 6.0 Embellishment guidance Best practice guidance for the design, manufacture and installation of embellishments includes: Skate parks Design Skate parks must be developed in accordance with the Sunshine Coast Skate and BMX Plan The plan outlines site selection considerations and other items relevant to skate park positioning and design. Design for the needs of skate board riders, BMX and scooter users, to attract a diverse range of users. Design for a range of user age groups, skill levels and abilities. Skate parks must be designed by an experienced professional skate park designer in consultation with users and certified by a suitably qualified engineer. Construction Footing design for skate parks is to be designed by a suitably qualified engineer. Made from robust materials that are vandal and corrosion resistant (particularly in coastal areas): suitable for the coastal corrosive environment suitable for use in the public open space environment. manufactured to engineering specifications (where applicable). Provide access points for emergency vehicles minimum of 3.0m wide (preferably 3.5m). Drainage designed to prevent water pooling on facilities Select designs which allow access to remove any rubbish which may collect. Skate park signs SCC Parks and Gardens skate park regulatory signs are installed to protect users from potential harm. The sign: must contain information about legal requirements and may be grouped with information / way finding signs. may inform people about the purpose of the skate park, or give clear instruction on the correct use of the skate park. must be positioned on or close to an entry where possible and is enforceable by SCC. may require building certification. See LIM Signage for further guidance. Ancillary embellishments Provide shade over skate parks and over spectator seating. See LIM Shade Sails and LIM Shelters for further guidance. A drinking fountain should be installed. See LIM Drinking Fountains for further guidance. Spectator seating should be installed. See LIM Seats for further guidance. Fencing is not required, unless there are site specific requirements, such as public safety. Fencing is to be commercial quality, heavy duty and vandal resistant. Consider providing night lighting to extend hours of use and to increase security where the skate park is not located in residential areas. Wheelie bins must be installed with a wheelie bin enclosure at skate parks, as bins can be removed and used to gain access to high areas. See LIM Bins for further guidance. Building approval is required. Construction should preferably be formed smooth surface concrete or modular concrete pieces. Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 10

11 7.0 Positioning guidance Best practice guidance for the way embellishments are placed or arranged, includes: Positioning Site location Skate parks must be developed in accordance with the Sunshine Coast Skate and BMX Plan The plan outlines site selection considerations and other items relevant to skate park positioning and design. Consider noise mitigation measures where feasible, by considering (but not limited to) the following: distance from nearby residences surface types and finishes (concrete / steel) orientation, such as the skate bowl acoustic fencing. See also: Environmental Protection Act (Noise), and SC Planning Codes. Crime Prevention through Environmental Design (CPTED) principles are important for positioning a skate park to ensure that users feel safe, with opportunity for casual surveillance park must be located within sight of the road and avoid screen planting. Skate parks should be located close to public transport, road networks, bicycle and pedestrian links and car parking. Skate parks are to be sited to prevent noise pollution in residential areas. Skate parks should be located adjacent to active spaces to create youth activity and active recreation precincts, and with ancillary facilities such as shopping centres, commercial areas, youth centres, sporting facilities and picnic areas. Venues capable of hosting competitions can include public art, public toilet facilities and events infrastructure, such as power for microphones. In high usage and high surveillance parks, colocate facility near playground equipment, to allow parents to supervise their children of various ages and interests. Suggested positioning relationships have been illustrated in the attached drawing. See Figure 1: Plan elevated skate park. Shade Shade sails / structures are preferred in District and Sunshine Coast wide parks. Ensure shade sail posts do not provide collision obstacles. Use of existing trees for shade is only appropriate where the design considers tree protection requirements, under guidance of a qualified arborist. It is preferable to plant trees at the time of skate park installation. Ensure that mature trees do not screen off the facility and create an unsafe environment. See the following LIM categories for further guidance LIM Planting (Landscape) LIM Palettes Planting. Site setout skate elements Allow ample space for run up and landings at the beginning and end of elements to reduce conflict and enhance safety (particularly important for the installation of shade sail posts). At transition areas, consider safety issues and drop off hazards, and provide safe level changes, and batter planting. Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 11

12 Figure 1: Plan elevated skate park (not to scale for guidance only site specific design required) Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 12

13 Clearances Position skate parks to provide the following: Skate parks Allowance for deck mowers 2.5m clear turf area around embellishments (where possible) and avoid creating small difficult to mow areas. See Table 2: Positioning guidance offsets for further guidance. Shade (height clearances) Ensure shade sails are sufficiently high to prevent unintended access, such as 4.5m post height to shade sail connection point, 3.0m above highest accessible point and no access from adjoining embellishments, trees, or other structures. See LIM Shade Sails for further guidance. Table 2: Positioning guidance offsets Embellishment Distance from Minimum distance Skater area Skate park concrete slab edge bins taps drinking fountains bicycle rails seating sign BBQ But bin Reason 5.0m Safety offset to minimise conflict with other users. 10m 10m Tobacco laws ban smoking at or within a 10m buffer zone within any part of a skate park. The ban includes the use of all smoking products, including electronic cigarettes. any other items 2.5m For deck mower clearance (where possible). Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 13

14 8.0 Equal access guidance Implement equal access for all users by adopting the following principles: Elements required for equal access Access requirements for new building works are outlined throughout various sections of the NCC (current edition), BCA Volume 1 (current edition) and these apply to car parking, external paths to buildings, building entrances and accessibility requirements within a building (such as accessible or ambulant toilets, stairs, ramps, exit signs). Ensure that skate parks are connected to a continuous accessible path of travel to enable equal access for people who use wheelchairs. Ensure that the path of travel is connected to an accessible car park space. Consider a skate park design to include people who use wheelchairs in place of skate boards. Consider installing equal access seats for passive surveillance of skate park users. Install embellishments a minimum 500mm offset from the edge of connection pathways, to provide safe clearance for pedestrians and cyclists. Avoid finished height difference between a concrete slab and adjoining surfaces to prevent trip hazards and to prevent tramlining of skates, bicycles, prams and wheelchair wheels. Colour Requirements Provide sufficient contrast with the background against which the object is viewed and has a luminance factor of not less than 30%, for ease of identification by people with vision impairment, or The selected embellishments colour may strongly imply a coloured concrete base slab is used. Contrast can be enhanced, by providing a different coloured concrete border around the elements to improve colour and luminance contrast. Consider designing nodes with a contrasting coloured concrete, or a variation in surface texture, to enable people with a disability to identify the location of embellishments along a pathway. See Figure 2: Plan at grade skate park for further guidance. Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 14

15 Figure 2: Plan at grade skate park (not to scale for guidance only site specific design required) Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 15

16 9.0 Project management and maintenance Documentation The submission of design documentation and technical specifications for each item (where applicable), is to include, but not be limited to: approvals, searches, compliant drawings and documentation written compliance with relevant legislation, Australian Standards and corporate documents (including specifications and access and mobility requirements) preliminary site setup (refer LIM category) compliance with safety, tree protection, erosion and sediment control measures technical information the manufacturer s product, installation, inspection, warranties and maintenance information materials specification of materials schedule of finishes engineered design and any required certifications unusual requirements for handling or installation and competency requirements workplace health and safety plan, where applicable environmental management plan (EMP) and / or erosion and sediment control plan, where applicable. Practical completion technical information to be supplied: At practical completion, the contractor must supply technical specifications, including but not limited to: certification inspections, final approvals and documentation as constructed drawings and specifications which should detail the location of any sub-surface services (e.g. drainage, electrical) operational manuals inspection / maintenance details including parts and service manuals, and manufacturer s guarantees construction and / or maintenance tools including non-standard maintenance tools for bolt tightening and replacement parts all required signage should be installed prior to hand-over of the asset, where applicable manufacturer s guarantees / warranties and any other documents or items, including quality management compliance and accreditation. Maintenance period and / or defects liability period Developer delivered assets The development maintenance period and requirements are nominated in the conditions of approval (decision notice). Council delivered assets The maintenance period and requirements are nominated in the letter of appointment of contractor (contract). Prior to the end of the pre-determined maintenance period or defects liability period, a pre-handover inspection should be conducted by an authorised council officer. The following items will apply: Compliance Audit Rectification Action Plan (RAP) is provided identifying any faults and non-compliance RAP items are to be rectified prior to handover. Suggested minimum warranties: Skate Parks = may be applicable (varies). Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 16

17 Documentation additional skate park documentation In addition to the standard documentation listed above, the submission of skate park design documentation and technical specifications for each item (where applicable), is to include, but not be limited to: It is generally preferable to engage a sole contractor for the design and construction of skate parks, to ensure responsibility lines are clear and to meet warranty conditions. specifications detailed requirements are contained in the attached LIM specifications (under development). detailed design with dimensioned drawings illustrating equipment details, plan view, elevations and levels. These drawings must show the relationship of equipment to any other elements to be constructed in the area (including any shade sails). Drawings must detail: minimum clearance dimensions intended age range and abilities. skate park details installation manuals and documentation outlining: the need for any special tools, lifting devices, space required for installation and correct orientation. details of the required foundations / footings anchorage in the ground and design and location of the foundation / footings. specification and availability of skate park spare parts. certified engineering drawings (including footing designs) and soil test results. building approval for equipment over 3.0m in height and shade sails. During construction additional skate park requirements During construction, the contractor must supply technical information including but not limited to: submit installer s statements verifying that the substrate is satisfactory for receiving the installation. confirmation of footing compliance. Practical completion additional shade sail technical information to be supplied In addition to the standard information listed above, at practical completion, the contractor must supply technical specifications for each item in the skate park footprint and including but not limited to: certification inspections, final approvals and documentation from a certified compliance engineer detailing: that the design, construction and installation of the skate park are undertaken to the manufacturers specifications and comply with Australian Standards and all other relevant statutory requirements codes, regulations and standards. building and plumbing approvals where applicable. compliance plate all equipment pieces must have a compliance plate in accordance with Australian Standards for Play Spaces AS 4685 Playground Equipment and Safety set. skate park installation, inspection and maintenance the manufacturer should supply product installation, inspection and maintenance information for each item of equipment, illustrated where possible. It should also include: maintenance requirements the manufacturer s instructions will specify the type, method and frequency of the inspections and maintenance regime and if a particular level of competence is necessary for inspection and / or maintenance. manufacturer s instructions should specify all matters that require maintenance inspection such as servicing points and methods, replacement parts specifications, disposal, spare parts, surface finishes and drainage holes. maintenance manual and tool kit the manufacturer must supply a maintenance manual and tool kit, including any special skate park tools required. running-in requirements such as; tightening of fastenings. all relevant signage should be installed prior to the acceptance of the works. Sunshine Coast Open Space Landscape Infrastructure Manual August 2018 Skate Parks 17

18 Sunshine Coast Open Space Landscape Infrastructure Manual DISCLAIMER Acknowledgements Council wishes to thank all contributors and stakeholders involved in the development of this document. Copyright Sunshine Coast Regional Council supports and encourages the distribution of its material however, copyright protects this document. Council has no objection to this material being reproduced but only if council is recognised as the owner of the copyright and this material remains unaltered. Disclaimer Information contained in this document is based on available information at the time of writing. All figures and diagrams are intended as an aid to design and include council s preferred elements but they are not intended to be prescriptive and may need to vary as dictated by site specific factors. While the Sunshine Coast Regional Council has exercised reasonable care in preparing this document it does not warrant or represent that it is accurate or complete. Council or its officers accept no responsibility for any loss occasioned to any person acting or refraining from acting in reliance upon any material contained in this document. This document is produced to convey general information and is not intended to constitute advice whether professional or legal. Any reference to legislation in this document is not an interpretation of the law. It is to be used as a guide only. Consult relevant authority websites for current documents, revisions and amendments. While every care has been taken in preparing the information in this document, Sunshine Coast Regional Council and its representatives accept no responsibility for decisions or actions taken as a result of any data, information, statement or advice, express or implied, contained within. The contents of this document were correct to the best of our knowledge at the time of publishing. Where a particular product or supplier is profiled in this document, Sunshine Coast Regional Council is NOT nominating this product or supplier as the selected choice. Product or supplier detail is to provide information to enable the user to source a product which contains the correct elements required for Council embellishments. Drawings contained in this document are NOT FOR CONSTRUCTION. Details in this document are deemed to be the minimum standard and the user may wish to apply a higher standard subject to approval by council. mail@sunshinecoast.qld.gov.au T F Locked Bag 72 Sunshine Coast Mail Centre Qld 4560