QA(13) - Series Miniature Circuit Breakers
|
|
- Willa Lester
- 6 years ago
- Views:
Transcription
1 1 pole 2 pole 3 pole 3 + N Features AC Circuit Breaker Hydraulic-Magnetic technology 100% rating capability, independent of ambient temperature VC 8036 compliant (SANS 556-1) VDE approved, CE certified Ratings 5 to 60 A (subject to certification) Precision tripping characteristics Ultra compact 13 mm wide module Trip indication with mid-trip position Reset immediately after overload product in black shells Suitable to use for electrical isolation Shell designed for easier installation onto busbar Applications AC branch circuit protection (IEC / EN ) Switch Disconnector (IEC / EN ) Telecom / datacom equipment Lighting control UPS equipment Alternative energy equipment Mobile power generation equipment Railway signalling equipment Residential equipment Industrial equipment Auxiliary Switch, Trip Alarm & Combo: Features Auxiliary Switch Auxiliary Switch + Trip Alarm Trip Alarm AC and DC voltages UL 489 listed (Auxiliary Switch: 6 A 250 V AC, 0.5 A 80 V DC) IEC approved (Auxiliary Switch: 6 A 240 V AC, 0.5 A 110 V DC; Trip Alarm: 6 A 240 V AC, 0.5 A 110 V DC) Factory fitted Attached to right hand side of Circuit Breaker Compact 6.5 mm width Optional Accessories Handle lock Surface mounting clips Busbar Escutcheon blank Safety blank Page 1 of 6
2 Technical Data low voltage Product Type Circuit Breaker Approvals VC 8036 (SANS 556-1) Number of Poles 1 2 (1+N) (3+N) Operating Voltages 240 V AC 415 V AC Minimum Current Rating 5 A 5 A Maximum Current Rating 60 A 50 A Interrupting Capacity 2.5 ka Product Type Circuit Breaker Approvals IEC / EN , VDE Number of Poles 1 2 (1+N) (3+N) Operating Voltages 240 V AC 415 V AC Minimum Current Rating 5 A Maximum Current Rating 50 A Interrupting Capacity 3 ka Product Type Switch Disconnector Approvals SANS Number of Poles Operating Voltages 240 V AC 415 V AC Current Rating 63 A Description Operating Temperature Range -40 o C to +85 o C Mounting Options Mini Rail, surface mount Time Delay Curves 3 Breaker QA Wire Size mm² (IEC) Torque (IEC) Comments 1 Pole to 4 Pole mm² 2.5 Nm Pozidriv #2 Combi head Page 2 of 6
3 Long Code Example Code: QA-----3(13)-MR-3-15A Group Requirement QA Frame Switch / Neutral 13 mm Auxiliary + Trip Alarm Triple pole module width Mini Rail Short delay curve 3 Current Rating 15 A Future use Shunt Trip Future use Long Code QA (13) MR 3 15A Group 1: Frame Type Group 2: Switch/Neutral Group 3: Auxiliary Group 4: No of Poles Group 5: Module Width Group 6: Mounting QA 13 mm wide Miniature Circuit Breaker - Not applicable Overload poles do not have any further coding S Switch Green handle N Neutral - Not applicable Use this code if no Auxiliary used A Auxiliary Switch (1 x Aux in 1 module) 6.5 mm module fitted on right-hand side T Trip Alarm (1 x Trip Alarm in 1 module) 6.5 mm module fitted on right-hand side AT Auxiliary Switch + Trip Alarm combo (combined in 1 module) 6.5 mm module fitted on right-hand side 1 Single pole 2 Double pole 2 pole or 1+N 3 Triple pole 4 Four pole 4 pole or 3+N (13) 13 mm module width MR supplied in black body only - 57 mm Escutcheon DM Dual Mount Dual Mount supplied in black body only - 57 mm Escutcheon Group 7: Code Description Instantaneous Trip Point (x In) Comments Time Delays 3 Short time delay 3 5 White handle Group 8: Code / Description Comments Current Ratings available vary depending on certification Ratings 5, 10, 15, 16, 20, 25, 30, 35, 40, 45, 50, 60 A * Other ratings are available as special orders. Check availability. Group 9: Code For future use (-) Group 10: Shunt Trip - Not applicable Use this code if no Shunt Trip is used Group 11 Code For future use (-) For options not listed, please contact CBI for assistance Page 3 of 6
4 Time Delay Curves OPERATING CHARACTERISTICS CURVE Tripping Time (Seconds) Maximum Minimum % Rated Current * The published time delay curves are generated at 30 o C ambient temperature with the Circuit Breaker mounted in the up-right position. The must hold, must trip and instantaneous trip current values are not affected by temperature, although delay time for the other operating current values may have to be adjusted using the temperature compensation curve which is available on request. Internal Impedance vs Current Rating 10,000 Q-Range impedance values 1,000 Impedance (m Ω) Maximum 1 Minimum Page 4 of Amp rating
5 92.8 [3.654] 57.0 [2.244] 11 S Typical outline of Auxiliary Switch / Trip Alarm Auxiliary available (6.5 mm module width) to match the unit to which it is attached. Available types as listed in Group 3: Type T - Trip Alarm as shown in outline drawings (fitted on a Dual Mount product) Type AT - Auxiliary Switch + Trip Alarm (as shown) Type A - Auxiliary Switch 69.8 [2.748] 19.3 ± 0.3 [0.760 ± 0.012] AUXILIARY/ TRIP ALARM (AT) 18.0 [0.709] 36.5 [1.436] Circuit diagram when the Circuit Breaker is in the OFF position 6.0 [0.236] Trip Alarm Switch NC NO 15 C Auxiliary Switch TEST BUTTON (on Trip Alarm only) RoHS D V E Q-AUX A TRIP ALARM SWITCH AUXILIARY SWITCH 110 VDC : 0,5A 110 VDC : 0,5A 240 VAC : 6A 240 VAC : 6A EN/IEC Uimp = 2.5kV 12 Icw = 0.1kA UTIL. CAT. AC12/DC12 14 POLLUTION DEGREE 3 11 C NC NO 6.5 [0.256] 2.80 [0.110] [ ] 11.7 [0.461] 0.8 [0.0315] 18.0 [0.709] 37.7 [1.483] 6.8 [0.270] 2.3 [0.090] 0.5 x 45 [0.020] CONNECTING TERMINALS DETAIL (COMMON TO ALL) Typical outline for an Auxiliary module attached to a Dual mount single pole Circuit Breaker All dimensions in mm [ inch ] Tolerance ± 0.4 unless otherwise specified Page 5 of 6
6 Outline Dimensions: Mini Rail 61.0 [2.402] 19.6 [0.772] 45.0 [1.772] 12.8 ± 0.2 [0.504 ± 0.008] 25.6 ± 0.4 [1.008 ± 0.016] 38.4 ± 0.6 [1.512 ± 0.024] 51.2 ± 0.8 [2.016 ± 0.031] 92.8 [3.654] 57.0 [2.244] 19.6 [0.772] 45.0 [1.772] 64.8 [2.551] 74.0 [2.913] (nominal) 12.8 [0.504] (nominal) All dimensions in mm [ inch ] Tolerance ± 0.4 unless otherwise specified Please review our Customer Terms and Conditions on All rights reserved. Unless otherwise indicated, all materials on these pages are copyrighted by CBI (Pty) Ltd. No part of these pages, either text or image may be used for any purpose other than personal use. Therefore, reproduction, modification, storage in a retrieval system or retransmission, in any form or by any means, electronic, mechanical or otherwise, for reasons other than personal use, is strictly prohibited without prior written permission. CBI (Pty) Ltd reserves the right to alter any details of this document without notice and while every effort is made to ensure the accuracy of the content, no warranty is given as to accuracy of this document and no responsibility will be accepted for error or misinterpretation and any resulting loss. AUSTRALIA CBI-electric: Australia 90 Fairbank Road Clayton South Melbourne Victoria 3169 Australia Tel: Fax: sales@cbi-electric.com.au Website: SOUTH AFRICA CBI-electric: low voltage Tripswitch Drive Elandsfontein Gauteng South Africa Tel: Fax: cbi@cbi-electric.com Website: USA CBI-electric: North America 35 E. Uwchlan Ave Suite 328 Exton PA USA Tel: Fax: info@cbibreakers.com Website: Page 6 of 6 A member of the Group
Cat. N. Cat. N (s) 1. DESCRIPTION - USE 3. OVERALL DIMENSIONS. Technology : 4. PREPARATION - CONNECTION 2. PRODUCT RANGE
Cat. N STOP & GO automatic resetting 87045 LIMOGES Cedex - FRANCE Telephone : + 33 5 55 06 87 87 Fax: + 33 5 55 06 88 88 Cat. N (s) : 4 062 88 / 4 062 89 CONTENTS PAGE 1. Description - Use... 1 2. Product
More informationVAMP 120 & 121. Arc flash detection units. Product picture
Arc flash detection units VAMP 120 and 121(D) are extremely fast arc flash detection units for LV and MV switchgear and controlgear. The units are especially designed to increase the safety and to minimize
More informationDipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str Grünberg Tel.: Fax:
Dipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str. 5 505 Grünberg Tel.: 00 807-0 Fax: 00 807-259 Insulation monitoring device for unearthed AC/DC systems (IT systems for the supply of operating theatre
More information* Consult factory on conditions for approval acceptability
6 Introduction Guide Guide to Power Protection How various power protection devices work How to use power protection devices 39 6600 Series Sub-miniature bimetal thermostat 8-PIN DIP package configuration
More informationISOMETER IR425. Insulation monitoring device for unearthed AC/DC control circuits (IT systems)
ISOMETER IR425 Insulation monitoring device for unearthed AC/DC control circuits (IT systems) IR425-D4_D00039_04_D_XXEN/05.2017 ISOMETER IR425 Insulation monitoring device for unearthed AC/DC control circuits
More informationMolded Case Circuit Breakers, Bulletin 140G
ROCKWELL AUTOMATION PROCUREMENT SPECIFICATION PROCUREMENT SPECIFICATION Molded Case Circuit Breakers Bulletin 140G NOTICE: The specification guidelines in this document are intended to aid in the specification
More informationBulletin 140G Molded Case Circuit Breakers Product Selection 225 A, I-Frame
Product Selection 225 A, I-Frame Assembled 225 A I-Frame Interrupting Rating/Breaking Capacity Thermal-Magnetic Circuit Breakers Interrupting Rating (50/60 Hz), UL 489/CSA C22.2-5, No. 5-02 [ka] Thermal-Magnetic,
More informationCircuit Protector. GCP Series. Features. Electromagnetic Overcurrent Protection. Approvals. AC/DC Dual Voltage. Easily Identified ON/OFF Indicator
Circuit Protector GCP Series Features Electromagnetic Overcurrent Protection Overcurrent is prevented by an electromagnet, which is more appropriate and effective for circuit protection than the thermostatic
More informationResidual Current Devices
Residual devices F200 Series UL 1053 Residual devices F200 Series Residual Current Devices Description The F200 Series residual devices offer a wide range of product for all of your fault protection needs.
More informationProducts :: Circuit Protection :: Thermal Circuit Breakers
Products :: Circuit Protection :: Thermal Circuit Breakers Thermal Circuit Breaker CTB-Series CTB-Series PDF elibrary The CTB-Series is a compact, single pole, rocker actuated family of thermal circuit
More informationLORAIN CIP 4890/48120 DC Power System
DC Power for Business-Critical Continuity Key Features Compact flexibility provides rectifiers, distribution, and controller in one shelf Constant power delivers more current at lower voltages to meet
More informationISOMETER IRDH275BM-7 with coupling device AGH675-7 and AGH675-7MV15
with coupling device AGH675-7 and AGH675-7MV15 Device combination for insulation monitoring in unearthed AC, AC/DC and DC power systems (IT systems) IRDH275BM-7_D00123_03_D_XXEN/01.2017 with coupling device
More informationLORAIN CSP DC Power System
DC Power for Business-Critical Continuity Key Features Compact flexibility provides more space for revenue generating equipment Constant power delivers more current at lower voltages to meet load or recharge
More informationMoulded case circuit brakers
Moulded case circuit brakers CONTENT Range 1 Protection Releases 2 Salient Features 5 Accessories 7 Widest Range 10 Time Current Characteristics 12 Overall Dimensions 14 SN4 SN3 SN2 SN1 3 RANGE SN1 Rated
More informationISOMETER IR425. Insulation monitoring device for unearthed AC/DC control circuits (IT systems)
Insulation monitoring device for unearthed AC/DC control circuits (IT systems) TDB103005en/05.2013 Insulation monitoring device for unearthed AC/DC control circuits (IT systems) Product description The
More informationBulletin 1608N MiniDySC Dynamic Sag Corrector
User Manual Bulletin 1608N MiniDySC Dynamic Sag Corrector Single Phase Voltage Sag Correction 2...6 Amps (250...750 VA) Important User Information Solid-state equipment has operational characteristics
More informationEARTH LEAKAGE RELAY. User Manual - Issue 1.0
Earth Leakage Relay www.sifamtinsley.co.uk Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers Analogue Panel Meters EARTH
More informationOverload relays. General descriptions. Configuration of the front
Overload relays General descriptions Type MT, bimetal-style, overload relays are designed to protect AC circuits and motors against overloads, phase failure, long starting times and prolonged stalling
More informationISOMETER IR1575. Insulation monitoring device for unearthed AC/3(N)AC systems up to 480 V and DC systems up to 480 V
Insulation monitoring device for unearthed AC/3(N)AC systems up to 480 V and DC systems up to 480 V IR1575_D00116_00_D_XXEN/05.2015 Insulation monitoring device for unearthed AC/3(N)AC systems up to 480
More informationGM420. Digital Ground Continuity Relay For AC Systems. Technical Bulletin NAE /
3 GM20 Digital Ground Continuity Relay For AC Systems Technical Bulletin NAE03230 / 0.20 GM20 Ground continuity monitor For AC systems Description The GM20 monitors the loop resistance of ground conductors
More informationM7100 Pressure Transducer
SPECIFICATIONS Performance standard on and off highway engine and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless steel wetted surfaces
More informationM15051) INSTRUCTION MANUAL
INSULATION GUARD MEG-1000 (Code M15051) INSTRUCTION MANUAL ( M98122001-20 / 05A ) (c) CIRCUTOR S.A. Insulation guard MEG-1000 1.- BASIC INSTRUCTIONS 1.1.- Delivery spot check This manual is issued to help
More informationDEB71. Earth Leakage Monitoring Relay. Benefits. Description
Earth Leakage Monitoring Relay Benefits Adjustable trip level. Adjustable leakage threshold from 30mA to 5A or from 300mA to 30A. 2 outputs. Two relay outputs provide, besides the alarm signal an additional
More informationElectronic Standard Devices. Annunciator Relay. MR 11 and MRE 11 MR 21 and MRE 21
Electronic Standard Devices Annunciator Relay MR and MRE MR 2 and MRE 2 The products described in this brochure are intended for industrial use and meet the requirements laid down by the EU directive 7
More informationISOMETER IRDH375. Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems)
Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems) IRDH375_D00124_01_D_XXEN/07.2018 Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems) Product
More informationisopv and AGH-PV Ground Fault Detector for Ungrounded Solar Arrays up to 1100 V And Isolation Tester Prior to Array Startup (Grounded and Ungrounded)
T M 1 isopv and AGH-PV Ground Fault Detector for Ungrounded Solar Arrays up to 1100 V And Isolation Tester Prior to Array Startup (Grounded and Ungrounded) Technical Bulletin NAE1012372 / 03.2015 isopv
More informationDTA. Motor thermistor relay. Benefits. Description
DTA Motor thermistor relay Description DTA71 and are precise Motor thermistor monitoring relays. They can monitor up to 6 motor temperatures through the motor internal temperature. PTCs are connected in
More informationWelcome to Hager Presentation
Welcome to Hager Presentation Topics Intro to Hager Group Circuit Protection Enclosures Q&A IIEE Manila 4 th August 17 13.03.2009 2 Company presentation Who we are Hager Group is a leading provider of
More informationISIS SAFETY SYSTEM Installation guide
ISIS SAFETY SYSTEM Installation guide CAUTION This information is designed to help suitably qualified personnel install and operate Mechan Safety equipment. Before using this product, read this guide thoroughly
More informationTable of Content LT 5165-UL
Table of Content LT 565-UL. User manual.... Legal regulations... 3. Safety instructions... 3 4. Technical information... 4 5. Technical data... 4 6. Performance Graph... 5 7. Mounting... 6 8. Mounting
More informationIndustrial Solid State Contactor TE10S. Static switching of resistive loads and shortwave infrared heating tubes up to 20 kw
Industrial Solid State Contactor TE10S Static switching of resistive loads and shortwave infrared heating tubes up to 20 kw Partial load failure (PLF) detection option User Manual Copyright Eurotherm Automation
More informationRoHS. Ready. KILOVAC LEV100 Series 900 Vdc Contactor DESCRIPTION KEY FEATURES
KEY FEATURES Hermetically sealed intrinsically safe. Operates in explosive/harsh environments without oxidation or contamination of contacts, including long periods of non-operation 8kV isolation between
More informationMains Power Filter 970MF10 970MF20. Installation Instructions
Mains Power Filter Installation Instructions and Table of Contents 1.0 Warnings... 3 2.0 Introduction... 3 3.0 Quick Installation Overview... 3 4.0 Typical Installations... 3 5.0 Protection Concepts...
More informationProduct Specifications 480 VAC, 175A Main Power Distribution Panel
NOVA Energy & Automation Product Specifications 480 VAC, 175A Main Power Distribution Panel Model NEAS-43175-ST 29 July 2012 Product Description 1. Standard Applications The Nova NEAS-43175-ST system Main
More informationAnnunciator Relay MR 11 and MRE 11 MR 21 and MRE 21. Automation Equipment. Power Station Control Systems. Control Room Technology
Annunciator Relay MR 11 and MRE 11 MR 21 and MRE 21 Power Station Control Systems Power Distribution Control Systems Control Room Technology Automation Equipment The products described in this brochure
More informationisopv425 and AGH420 Ground Fault Detector for Ungrounded Solar Arrays < 100 kw And Isolation Tester Prior to Array Startup (Grounded and Ungrounded)
T M 1 isopv425 and AGH420 Ground Fault Detector for Ungrounded Solar Arrays < 100 kw And Isolation Tester Prior to Array Startup (Grounded and Ungrounded) Technical Bulletin NAE1012670 / 08.2013 isopv425
More informationOperating Manual TR600
ZIEHL industrie elektronik GmbH + Co KG Daimlerstraße 13, D 74523 Schwäbisch Hall + 49 791 504-0, info@ziehl.de, www.ziehl.de Temperature Relays and MINIKA Mains Monitoring Digital Panelmeters MINIPAN
More informationVAmP 120. Arc Flash Protection Units. Arc Protection. Customer benefits
Arc Protection 01 VAmP 120 Arc Flash Protection Units Customer benefits Personnel Safety A fast and reliable arc protection unit may save human lives in case of an arc fault arising in a switchgear during
More informationPROTECT SRB 200EXi-1A
2 Installation up to zone 1/21 J S L1 0V X1 X3 S11 S12 S21 S22 Installation up to zone 2 A1 F1 F2 U B U EXi U i 0V S12 S22 X1 X3 K1 Logic K2 K1 K2 13 23 U EXi SRB 200EXi U B -1A U i K1 K2 PA PA A1 A2 13
More informationAPS-300 SERIES DUAL VOLTAGE UL 294 LISTED ACCESS CONTROL POWER SUPPLIES
APS-300 SERIES DUAL VOLTAGE UL 294 LISTED ACCESS CONTROL POWER SUPPLIES POWER SUPPLY AND BATTERY CHARGER AC AND DC STATUS INDICATORS ENOUGH POWER TO SUPPORT UP TO 3 MAGLOCKS OR ELECTRIC STRIKES PLUS REQUIRED
More informationCCD-Precision. Intelligent Laser-Optical Displacement Measurement. CCD System SENSORS & SYSTEMS. Authority in Displacement Measurement ILD 1800
SENSORS & SYSTEMS Authority in Displacement Measurement CCD-Precision high accuracy and resolution compact sensor design 5 khz frequency N ILD 1800 TRIANGULATOI PRINCIPLE OPTO NCDT Intelligent Laser-Optical
More informationESP TECHNOLOGIES LIMITED
Alarm Technology ESPAN-01 Series Annunciator System Combination type User Manual (Rev. 1) ESP TECHNOLOGIES LIMITED www.esptechno.com Content Page Introduction 2 General Description 2 Overview - Annunciator
More information40 CDe ENCLOSURES AND DISTRIBUTION BOARDS FOR SPECIFIC STANDARDS
40 CDe - Surface-mounting enclosures - Spanish standard Standard: IEC 60670-1; IEC 60670-24 Degree of protection: IP40 Installation temperature: max. +60 C; min. -25 C Impact : IK 08 Heat : thermo-pressure
More informationInstallation Guide for models:
140 58th St. Brooklyn, NY Access Power Controllers with Power Supplies Installation Guide for models: Maximal3FD - 12VDC @ 4.6 amp or 24VDC @ 5.2 amp. - Sixteen (16) PTC protected power-limited outputs.
More informationResistance heaters. Ventilation systems. Air-air exchangers. Air-water exchangers. Cooling units. Control devices. Calculation and selection
7 0 Selection guide TO CONTROL THE TEMPERATURE Respects the entered value Compact fixed thermostats Preset factory temperature: NA (blue button):, 0, ºC for the resistance heater. (red button):, 0, ºC
More information1.7. Insulation fault evaluators EDS460/490 EDS461/491
Bender Incorporated 700 Fox Chase, Coatesville PA 1930 Tel.: (800) 356-466 Fax: (610) 383-7100 Insulation fault evaluators EDS460/490 EDS461/491 Insulation fault evaluators with display and control function
More information7XG3120 ReyArc20 Arc Fault Monitor Relay Energy Management
Reyrolle Protection Devices 7XG3120 ReyArc20 Arc Fault Monitor Relay Energy Management 7XG3120 - Arc Fault Monitor Relay The over-current caused by an arc is, due to its resistance, lower than the over-current
More informationM5200 Industrial Pressure Transducer
SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof UL Certified Gage, Sealed, Compound
More informationOrdering Key. Dielectric strength
Controllers AC Semiconductor Controller Type Soft starting and stopping of 3-phase squirrel cage motors Low inrush and reduced vibration during starting Integrated bypassing of semiconductors Rated operational
More informationProduct Specifications 480 VAC, 70A Main Power Distribution Panel
NOVA Energy & Automation Product Specifications 480 VAC, 70A Main Power Distribution Panel Model NEAS-43070-ST 29 July 2012 Product Description 1. Standard Applications The Nova NEAS-43070-ST system Main
More informationDTA04. Motor thermistor relay. Benefits. Description
Motor thermistor relay Benefits High operating safety. The thresholds are determined by the Motor PTC. Beyond the specified temperature the output stops the motor/s. Save time and costs.there is no need
More informationRE-PR3-E-27 3-Phase Panel Mount 27kW
Page 1 of 6 RE-PR3-E-27 3-Phase Panel Mount 27kW Features: Benefits: 0-10Vdc, 0-5Vdc, 4-20mA or manual via potentiometer control input Over temperature protection with auto reset Enclosed panel mounting
More informationCPS V Cabinet Power System
4100W (75A) Temperature Hardened System Input: 85 Vac to 264 Vac (Autoranging) Output: -48 Vdc and Optional Ringing Generator H569-422 Battery Plant Model J85500R-1 The low-maintenance, outside-plant integrates
More informationBooster Power Supply Manual
Supply Manual DEVELOPED BY COPYRIGHT NOTICE General Signal Building Systems Corporation 6411 Parkland Drive Sarasota, FL 34243 (941) 739-4300 Copyright 1999 General Signal Building Systems Corporation
More informationVAMP 120 & 121. Arc Flash Protection Units. Arc Protection. Customer benefits
01 VAMP 120 & 121 Arc Flash Protection Units Customer benefits Personnel Safety A fast and reliable arc protection unit may save human lives in case of an arc fault arising in a switchgear during work
More informationSingle phase solid state contactors ENG. User Manual DATA MANAGEMENT CONTROLS PROCESS AUTOMATION
7100S ε 7100 Single phase solid state contactors ENG User Manual DATA MANAGEMENT CONTROLS PROCESS AUTOMATION 7100S SMART CONTROLLERS SINGLE-PHASE INDUSTRIAL SOLID STATE CONTACTORS 7000 series User Manual
More informationEngineered Solutions SYSTEMS CUSTOM ENGINEERED TO YOUR SPECIFICATIONS. Fused Coordination Panelboards...ES 2. Fusible Shunt Trip Switch..
ngineered olutions YTM CUTOM NGINRD TO YOUR PCIFICATION Your problem: You need to achieve code compliance and protect critical power operations with selective coordination. You need a UL Listed industrial
More informationOperating instructions Safety-monitoring module SRB 302X3. 1. About this document. Content
8 Appendix 8.1 Wiring examples...4 8.2 Start configuration...4 8.3 Sensor configuration...4 8.4 Actuator configuration...5 Operating instructions.............pages 1 to 6 Original 9 EU Declaration of conformity
More informationEmotron M10 Shaft Power Monitor. Instruction manual English
Emotron M10 Shaft Power Monitor Instruction manual English Contents 1 Inside the box... 3 2 Safety... 4 3 Description... 5 4 Getting Started... 6 4.1 Please take note of the safety section... 6 4.2 Connection
More informationDräger PointGard 2100 Detection of toxic gases and vapours
Dräger PointGard 2100 Detection of toxic gases and vapours The Dräger PointGard 2100 series is a self-contained gas detection system for the continuous area monitoring of toxic gases in ambient air PointGard
More informationPRODUCTS AND SOLUTIONS FOR PUMPING, IRRIGATION AND PIPING
PRODUCTS AND SOLUTIONS FOR PUMPING, IRRIGATION AND PIPING TRA DITIONS AND INNOVATION Since 1922 The first LOVATO Electric headquartes founded in Bergamo in 1922: the starting point of the grand industrial
More information5U Compact System. Installation Manual V1.0. Manufactured by Enatel Ltd. 321 Tuam Street PO Box Christchurch New Zealand
5U Compact System Installation Manual V1.0 Manufactured by Enatel Ltd. 321 Tuam Street PO Box 22-333 Christchurch New Zealand Phone +64-3-366-4550 Fax +64-3-366-0884 Email sales@enatel.net www.enatel.net
More informationResidual current monitor RCM470LY/RCM475LY. for TN and TT systems (AC and pulsating DC currents)
Residual current monitor RCM470LY/RCM475LY for TN and TT systems (AC and pulsating DC currents) TDB401003en/03.2010 Residual current monitor RCM470LY Residual current monitor for TN and TT systems (AC
More informationDALI Product Range. Designed in Australia to be compatible for all DALI systems. gerardlighting.com.au
DALI Product Range Designed in Australia to be compatible for all DALI systems gerardlighting.com.au Diginet Dali Brochure v6.indd 1 Diginet - your experts for DALI Lighting Controls DALI IS THE INTERNATIONAL
More informationSCC Inc. TS Series. Technical Instructions. Document No. TS 5000 February 12, TS CE Combustion Enclosures with LMV3.
TS CE Combustion Enclosures with LMV3 February 12, 2019 Description TS CE series combustion enclosure with Siemens LMV3 linkageless controller sets the new standard for combustion control and monitoring
More informationSolid Core and Split Core 4-20 ma Output Current Sensors CTS-20; CTP-20
Solid Core and Split Core 4-20 ma Output Current Sensors CTS-20; CTP-20 PRODUCT DATA FEATURES Solid or split core loop-powered current transmitters Fast response time Integral DIN rail mounting flange
More informationTTSIM-2 TRACETEK SENSOR INTERFACE MODULE WITH LCD AND RELAY INSTALLATION/OPERATION INSTRUCTIONS
TTSIM-2 TRACETEK SENSOR INTERFACE MODULE WITH LCD AND RELAY INSTALLATION/OPERATION INSTRUCTIONS GENERAL INFORMATION Please read these instructions and keep them in a safe place. These instructions must
More information1.7 A-ISOMETER IRDH575. RoHS. Dipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str Grünberg Tel.: Fax:
Dipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str. 65 505 Grünberg Tel.: 060 807-0 Fax: 060 807-59 A-ISOMETER IRDH575 Insulation monitoring device for unearthed AC, DC and AC/DC systems (IT systems) with
More informationI/A Series 716C 1/16 DIN Temperature Controller
Product Specifications I/A Series 716C 1/16 DIN Temperature Controller PSS 2C-1B5 A The Foxboro 716C is a powerful compact, 1/16 DIN, microprocessor-based temperature controller that offers a variety of
More informationRevision: None DCN No. First Issue Date: November 30, 1998 Product: Standard DCT, 120-volts
Figure 1Document: SPEC-112 Revision: None DCN No. First Issue Date: November 30, 1998 Product: Standard DCT, 120-volts construction requirements of UL approved Class H (180 C) insulation system. Transformers
More informationMTRA-FSP Level Control Relay. Installation & Operation Manual
MTRA-FSP Level Control Relay Installation & Operation Manual This Manual is the support documentation for the installation, commissioning and operation of the MTRA-FSP Level Control Relay. Document Revision
More informationCurrent and Voltage Sensors
Current and Voltage Sensors EVT Series VoltageWatch ECSJ Series CurrentWatch Current Switch EACR Series CurrentWatch Current Sensor.0 Introduction Product Selection Guide....................................1
More informationStego accessories for cabinets
www.klinkmann.com Stego accessories for cabinets page Small semiconductor Heater RC 016 2 Touch-Safe Small Heater CSK 060 3 Semiconductor Heater HG 140 4 Hazardous area Heater CREx 020 5 Touch-Safe Heater
More informationLINETRAXX VME420. Multi-functional relay for overvoltage, undervoltage and frequency monitoring in AC/DC systems with external supply voltage
LINETRAXX VME420 Multi-functional monitoring relay for undervoltage, overvoltage and frequency monitoring in AC/DC systems with separate supply voltage VME420_D00026_01_D_XXEN/06.2016 LINETRAXX VME420
More informationInstallation Guide for models:
140 58th St. Brooklyn, NY Access Power Controllers with Power Supplies Installation Guide for models: Maximal11F - Power Supply 1: 12VDC @ 3.3 amp or 24VDC @ 3.6 amp. - Power Supply 2: 12VDC @ 3.3 amp
More information1.Application. 2.Main Technical Specifications B-10
NS Series Moulded Case Circuit Breaker 1.Application NS series moulded case circuit breaker is one of breaker which adopts international advanced design, manufacture technology to develop. The rated insulating
More informationM5800 Pressure Transducer with Rotatable Display
Pressure Transducer with Rotatable Display SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and customized Electrical Configurations FEATURES CE Compliance Reverse Polarity Protection
More informationUltraLITE Model ELU Centralized Emergency Lighting Inverter 4.2 KW- 5 KW
12/23/16 Rev 9 UltraLITE Model ELU General Specification 4.2 KW to 5 KW UltraLITE Model ELU Centralized Emergency Lighting Inverter 4.2 KW- 5 KW 1.0 General General Specification This specification describes
More information1S25. Arc Fault Monitor 4 Zones, 8 Sensors. Features. Introduction. ARC Fault Protection
Technical Bulletin Arc Fault Monitor 4 Zones, 8 Sensors Features Four independent arc fault tripping zones 1 or 2 arc fault sensors per zone allowing up to 8 arc fault sensors per module Trip indication
More informationTHERMAL BUILDING SOLUTIONS EN-TraceTekTTSIM1A-IM-H /16
TraceTek TTSIM-1A TraceTek Sensor Interface Module with Relay Installation/OPERATION Instructions Approvals and Certifications TYPE NM General Signaling Equipment 76LJ Only AC versions are UL listed and
More informationU86B. Urea Dosing SPECIFICATIONS FEATURES APPLICATIONS
SPECIFICATIONS Mountable with O-ring seal Stainless Steel wetted surfaces Amplified ASIC calibrated Absolute, sealed gage Cable option Analog output SENT Output Optional (contact factory for details) FEATURES
More informationMonitoring Relays. 3RN1 Thermistor Motor Protection. For PTC sensors. 7/120 Siemens LV 1 T 2008
Monitoring Relays Siemens G 2008 Overview Thermistor motor protection devices are used for direct monitoring of the motor winding temperature. For this purpose, the motors are equipped with temperature-dependent
More informationDPB52. True RMS 3-Phase, Multifunction monitoring relay. Benefits. Description
DPB52 True RMS 3-Phase, Multifunction monitoring relay Description Benefits Measuring Voltage Range. Very wide input voltage range: from 125 to 624V ( 208V 40% to 480 + 30% ). Adjustable Voltage Ranges
More informationISOSCAN EDS460/490 EDS461/491. Insulation fault locators with control and display function for EDS systems (insulation fault location systems)
ISOSCAN EDS460/490 EDS461/491 Insulation fault locators with control and display function for EDS systems (insulation fault location systems) EDS460-490_D00085_01_D_XXEN/01.2017 ISOSCAN EDS460/490 EDS461/491
More informationProduct Bulletin. VeriSafe Absence of Voltage Tester. The Safe Way to Verify the Absence of Voltage.
Product Bulletin The Safe Way to Verify the Absence of Voltage. When servicing electrical equipment, workers must comply with safety regulations that require a voltage verification test to validate the
More informationEasy to use, initiate test with the push of a button No additional tools required Provides visual alert to abnormal power conditions
Product Bulletin VeriSafe Absence of Voltage The Safe Way to Verify the Absence of Voltage. When servicing electrical equipment, workers must comply with safety regulations that require a voltage verification
More informationFusible Shunt. Trip Switch. Operation and Maintenance Manual SOLUTIONS GUIDE
Fusible Shunt Trip Switch Operation and Maintenance Manual SOLUTIONS GUIDE Table of Contents Device Overview....2 Installation Instructions....3 Catalog Number Selection Table...4 Motor Fuse Selection
More informationXUBLAPCNL2 photo-electric sensor - XUB - thru beam - laser - Sn 100m VDC - cable 2m
Characteristics photo-electric sensor - XUB - thru beam - laser - Sn 100m - 12..24VDC - cable 2m Buy online Complementary Enclosure material Lens material Blind zone Output type Status LED [Us] rated supply
More informationMoulded Case Circuit breakers
GE Industrial Solutions Moulded ase ircuit breakers Record* ge.com/ex/industrialsolutions Record*.2 Introduction.3 Moulded ase ircuit reaker - thermal magnetic.4 Moulded ase ircuit reaker - thermal magnetic
More information>40 80 mm. Dishwasher EN Installation instructions. Appliance components >40. Recess for pipes >80. Front panel/decorative system.
Dishwasher EN Installation instructions Before installation, please read the safety precautions on the reverse side! Appliance components Recess for pipes >40 >80 >40 80 mm Front panel/decorative system
More informationPART GENERAL 1.01 SECTION INCLUDES
Specification Number: 26 24 16.06 Product Name: Emergency Lighting Control NQ Circuit Panelboards: 240 Vac, 48 Vdc Maximum SECTION 26 24 16.06 Emergency Lighting Control NQ Circuit Panelboards: 240 Vac,
More informationCII FCAC-150 Series Relay
Introducing CII Series Relay 50 Amps, 1PST/NO (DM) CII Series Relay 50 Amps, 1PST/NO (DM) with 1PDT Auxiliary Contacts KEY FEATURES Non-latching relay Balanced force design Corrosion protected metal enclosure
More informationMODEL: 47LPQ. Digital Panel Meters 47 Series. [3] ALARM OUTPUT 0: None 1: N.O. relay contact, 4 points 2: SPDT relay contact, 2 points
Digital Panel Meters 47 Series PULSE INPUT TOTALIZER (6-digit, LED display type) Functions & Features 6-digit digital panel meter 1/8 DIN size Process integration/totalization with scaling factor adjustment
More informationU5700 Submersible Liquid Level Pressure Transducer
SPECIFICATIONS High Accuracy CE Compliant and Waterproof UL Certified Variety of Pressure Port Configurations Waterproof Optional Stainless Steel Snubber IP68 Rated Connection and Submersible Polyurethane
More informationLINETRAXX RCMA420. Residual current monitor for monitoring AC, DC and pulsed DC currents in TN and TT systems
LINETRAXX RCMA420 Residual current monitor for monitoring AC, DC and pulsed DC currents in TN and TT systems RCMA420_D00059_01_D_XXEN/06.2016 LINETRAXX RCMA420 Residual current monitor for monitoring AC,
More informationCCD-Precision. Intelligent Laser-Optical Displacement Measurement. CCD System. SENSORS & SYSTEMS Authority in Displacement Measurement ILD 1800
SENSORS & SYSTEMS Authority in Displacement Measurement CCD-Precision high accuracy and resolution compact sensor design 5 khz frequency N ILD 1800 TRIANGULATOI PRINCIPLE OPTO NCDT Intelligent Laser-Optical
More informationInstallation Guide for AL600ULM. Multi-Output Access Control Power Supply Charger. Rev
Installation Guide for AL600ULM Multi-Output Access Control Power Supply Charger Rev. 091800 1 AL600ULM - Multi-Output Access Control Power Supply/Charger Overview: The AL600ULM multi-output access control
More informationProduct Specifications Auto Restart Main Power Distribution Panel
NOVA Energy & Automation Product Specifications Auto Restart Main Power Distribution Panel Model NEA090AR/RTX 03 January 2012 Product Description 1. Standard Application The Nova Auto Restart system Main
More informationXUM0APSAM8 photo-electric sensor - XUM - multi - Sn 0..10m VDC - M8
Characteristics photo-electric sensor - XUM - multi - Sn 0..10m - 12..24VDC - M8 Main Range of product Series name Electronic sensor type Sensor name Sensor design Detection system Material Type of output
More informationDesigned for testing three-phase circuits up to 600V Install on line or load side of electrical disconnect Detects absence of AC and DC voltage
Product Bulletin VeriSafe Absence of Voltage The Safe Way to Verify the Absence of Voltage. When servicing electrical equipment, workers must comply with safety regulations that require a voltage verification
More information