SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER SAE AEROSPACE STANDARD AS7928
|
|
- Marybeth Anderson
- 6 years ago
- Views:
Transcription
1 SUPPLEMENTAL INFORMATION SHEET FOR QPL 7928 QUALIFICATIONS HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING March 2016 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER SAE AEROSPACE STANDARD AS7928 TERMINALS, LUG:SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR This list has been prepared for use by or for the Government in the acquisition of products covered by the subject non-government standard and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest adopted issue of the applicable non-government standard. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the manufacturer from compliance with the non-government standard requirements. The activity responsible for this qualified products list and for qualification approval is the Naval Air Systems Command, AIR , Shaw Rd., Building 1461, Patuxent River, Maryland Manufacturer s full name, cage number, office and plant addresses are listed at the end of this QPL. THIS DOCUMENT IS AN OFFICIAL SUPPLEMENTAL INFORMATION SHEET OF THE PRODUCTS TRANSFORMED TO AN EQUIVALENT QUALIFICATION DATA SET (QDS). USERS OF THIS DOCUMENT MUST VISIT THE QUALIFIED PRODUCTS DATABASE (QPD) TO VERIFY QUALIFICATION INFORMATION. PLEASE VISIT TO ACCESS INFORMATION. YOU MUST HAVE A USER PASSWORD TO ENTER SITE. ONCE LOGGED IN CHOOSE QPD FROM THE SIDE MENU. YOU CAN SEARCH BY QPL NUMBER, DOCUMENT NUMBER, GOVERNING SPEC, TITLE, FSC, GOVERNMENT, NON- GOVERNMENT (NGS), MANUFACTURER, OR SOURCE NAME. AMSC N/A 1 FSC 5940
2 SAE-AS7928/1, TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TYPE II CLASS 1 FOR 105 ºC TOTAL CONDUCTOR TEMPERATURE. M7928/ Tyco Electronics (1) AE/
3 M7928/ Tyco Electronics (1) (Continued) l AE/ l l l l l l-5l864-l -5l 5l l6l l6l l l l6l l6l
4 SAE-AS7928/4, TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 C TOTAL CONDUCTOR TEMPERATURE). M7928/ Tyco Electronics (1) AE/
5 SAE-AS7928/5, TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE ELECTRIC, (PERMANENT, TYPE II, CLASS 1) FOR 105 ºC TOTAL CONDUCTOR TEMPERATURE. M7928/5-3 B1870BN Electro-Term -4 B1871BN Hollingsworth, Inc. -5 B1872BN AD/ M7928/5-3 WA-840 Molex-ETC -4 WB-841 Incorporated -5 WC AC/ M7928/ Tyco Electronics Amp (1) AE/ SAE-AS7928/6, TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC, (PERMANENT, TYPE II, CLASS 1) FOR 150 ºC TOTAL CONDUCTOR TEMPERATURE. M7928/ Tyco Electronics Amp (1) AE/ SAE-AS7928/7, TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TYPE I, CLASS 1, FOR 175 C TOTAL CONDUCTOR TEMPERATURE. M7928/7-1 R4103B Electro-Term -2 R4104B Hollingsworth, Inc. -3 R4262B -4 R4264B AD/ R4114B 5
6 M7928/7-6 R4115B Electro-Term -7 R4121B Hollingsworth, Inc. -8 R4123B (Continued) -9 R4125B AD/ R4126B -11 R4119B M7928/ Tyco Electronics-AMP (1) AE/ SAE-AS7928/13, TERMINALS. LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, TIN WHISKER RESISTANT, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 DECREE C TOTAL CONDUCTOR TEMPERATURE) M7928/ Tyco Electronics (1) AB/
7 M7928/ Tyco Electronics (1) (Continued) AB/ SAE-AS17143, TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, TYPE II, CLASS 1 FOR 105 C TOTAL CONDUCTOR TEMPERATURE. MS RA480 Thomas & Betts -2 RB480 Corporation (2) -3 RC480-4 RA AF/ RB481 MS RC481-7 RA482-8 RB482-9 RC RA RB483 Thomas & Betts -12 RC483 Corporation (2) -13 RA484 (Continued) -14 RB RC AF/ RA RB RC RA RB RC486 7
8 MS Tyco Electronics (1) AE/ SAE-AS20659, TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TYPE I, CLASS 1, FOR 175 C TOTAL CONDUCTOR TEMPERATURE. MS R3457B Electro-Term -106 R3459B Hollingsworth, Inc R3220B -165 R3453B AD/ R3223B MS YAV YAV10-T2 Burndy LLC -107 YAV8C-L (1) and (2) -108 YAV8C-L AC/ MS YAV6C-L -110 YAV6C-L2-111 YAV4C-L 8
9 -112 YAV4C-L2-113 YAV2C-L1-114 YAV2C-L -115 YAV1C-L1-116 YAV1C-L -117 YAV25-L1-118 YAV25-L -119 YAV26-L2-120 YAV26-L -121 YAV27-L Burndy LLC -122 YAV27-L1 (1) and (2) -123 YAV28-L AC/ YAV28-L12 Continued -128 YAV10-T4-129 YAV8C-L3-130 YAV6C-L1-131 YAV6C-L4-132 YAV4C-L4-133 YAV2C-L4-134 YAV1C-L3-135 YAV25-L3-136 YAV26-L3-137 YAV28-L YAV8C-L14 MS YAV8C-L1-142 YAV8C-L4-143 YAV6C-L YAV4C-L3-145 YAV4C-L5-146 YAV2C-L3-147 YAV2C-L2-148 YAV2C-L YAV1C-L2-150 YAV1C-L4-151 YAV25-L2-152 YAV25-L YAV26-L1 MS YAV26-L16 Burndy LLC -155 YAV27-L20 (1) and (2) -156 YAV27-L18 (Continued) 9
10 -157 YAV28-L YAV28-L AC/ YAV28-L YAV28-L YAV10-T7 MS C Molex-ETC -106 C Incorporated -128 C AC/ MS P10-6R Panduit Corporation -105 P10-10R -106 P10-56R AD/ P10-38R MS A85G Thomas & Betts -102 A87G Corporation (1)(2) -103 B85G -104 B87G AF/ C C D D E E F F G G H H J J K K L L M973 MS M C D
11 -130 E10261 Thomas & Betts -131 E10721 Corporation (1)(2) -132 F G975 (Continued) -134 H J AF/ K D D F G G G H H J J K K L L M M C C75 MS Tyco Electronics-AMP (1) AE/ SAE-AS21004, TERMINAL, LUG, UNINSULATED, RECTANGULAR TONGUE, CRIMP STYLE, COPPER, TYPE I, CLASS 1 FOR 175 C TOTAL CONDUCTOR TEMPERATURE. 11
12 MS A486 Thomas & Betts -2 A483 Corporation (2) -3 A482-4 A AF/ A485-6 A484-7 A480-8 B486-9 B B B B B B C C C C C C C480 SAE-AS25036, TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1, (FOR 105 C TOTAL CONDUCTOR TEMPERATURE). MS XR1881SN Electro-Term -102 XR1885SN Hollingsworth, Inc XR1891SN -104 XR1895SN AD/ XR1896SN -106 XR2442SN -107 XR1901SN -108 XR1903SN -109 XR1907SN -110 XR1908SN -111 XR5107N -112 XR5109N -113 XR5111N MS XR5112N -143 XR26336N -144 XR26337N 12
13 -145 XR26338N Electro-Term -146 XR26339N Hollingsworth, Inc XR26340N (Continued) -148 XR1880SN -149 XR1890SN AD/ XR1894SN -153 XR1902SN -154 XR1906SN -156 XR5108N -157 XR5110N -158 XR5117N -159 XR1879SN MS YAES18-N1 Burndy LLC -102 YAES18-N2 (1) and (2) -103 YAES18-N3-104 YAES18-N AC/ YAES18-N5-106 YAES14-N6-107 YAES14-N7-108 YAES14-N8-109 YAES14-N9-110 YAES14-N YAES10-N YAES10-N YAES10-N YAES10-N YAEV8C-L -116 YAEV8C-L1-117 YAEV8C-L2-118 YAEV8C-L3-119 YAEV6C-L1-M -120 YAEV6C-L-M -121 YAEV6C-L4-M -122 YAEV6C-L2-M -123 YAEV4C-L -124 YAEV4C-L4-125 YAEV4C-L2 MS YAEV2C-L1-127 YAEV2C-L -128 YAEV2C-L4 13
14 -129 YAEV1C-L1 Burndy LLC -130 YAEV1C-L (1) and (2) -131 YAEV1C-L3 (Continued) -132 YAEV25-L1-133 YAEV25-L -134 YAEV25-L AC/ YAEV26-L2-136 YAEV26-L -137 YAEV26-L3-148 YAES18-N YAES18-N YAES18-N YAES14-N YAES14-N YAES14-N YAES14-N YAES10-N YAES10-N YAES10-N58 MS AA Molex-ETC -102 AA Incorporated -103 AA AA AC/ AA BB BB BB BB BB C C C C AA AA AA BB MS BB Molex-ETC -154 BB Incorporated -156 C (Continued) 14
15 -157 C AC/ AA MS RA333 Thomas & Betts -102 RA853 Corporation -103 RA873 (1) and (2) -104 RA RA AF/ RB RB RB RB RB RC RC RC RC RD RD RD10721 MS PN18-6RN Panduit Corportation -102 PN18-6R -103 PN18-10R AD/ PN18-56R -105 PN18-38R -106 PN14-6RN -107 PN14-6R -108 PN14-10R -109 PN14-56R -110 PN14-38R -111 PN10-6R -112 PN10-10R -113 PN10-56R -114 PN10-38R -148 PN18-4RN -149 PN18-8R -150 PN18-14R MS PN14-4R -153 PN14-8R -154 PN14-14R 15
16 -156 PN10-8R Panduit Corporation -157 PN10-14R (Continued) AD/ MS RD10731 Thomas & Betts -119 RE10261 Corporation -120 RE10711 (1) and (2) -121 RE10721 (Continued) -122 RE RF AF/ RF RF RG RG RG RH RH RH RJ RJ RJ RK RK RK RL RL RM RM RAX RAX RAX RAX RAX RA RA RA RA RB1323 MS RB863 Thomas & Betts -154 RB713 Corporation -155 RB753 (1) and (2) 16
17 -156 RC863 (Continued) -157 RC AF/ RC753 MS or Tyco Electronics (1) or or AE/ or or or or or or or or Tyco Electronics (1) (continued) MS or AE/ or
18 SAE-AS25274, CAP, ELECTRICAL (WIRE END, CRIMP STYLE, TYPE II, CLASS 1) FOR 105 C TOTAL CONDUCTOR TEMPERATURE. MS Tyco Electronics (2) AE/
19 NAME CAGE NAME CAGE AND ADDRESS NUMBER AND ADDRESS NUMBER Electro-Term, Inc. Electro-Term/ Hollingsworth 50 Warehouse Street Springfield, MA Thomas & Betts Corporation 8155 T&B Boulevard Memphis, TN Plant: Plants: Same Address Thomas & Betts (1) Corporation Burndy LLC 1NJK8 Professor Roldolfo# East Industrial Park Drive Colonel Jardines De La Manchester, NH Victoria Guadalupe, Neuvo Leon, Plants: Mexico CP67119 Burndy Littleton Plant Thomas & Betts (2) 6G3H4 150 Burndy Rd. Corporation Littleton, NH Street A Lot Cabo-Caribe Industrial Burndy Lincoln Plant Park Route 3A Connector Road Vega Baja, Puerto Rico Lincoln, NH Molex-ETC Incorporated nd Avenue North Tyco Electronics AMP Pinellas Park, FL Fulling Mill Road Middletown, PA Plant: Same address Plants: Panduit Corporation Panduit Drive Tinley Park, IL Tyco Electronics-AMP (1) 30 Kauffman Road Landisville, PA LB91 Plant: Panduit Mexico Manufactura S. de R.L. de C.V. Blvd. Escobedo #200 Apodaca Technology Park, CP Apodaca, N.L. Mexico Tyco Electronics (2) 3155 State Route 72 Jonestown, PA LL35 19
SUPPLEMENTAL INFORMATION SHEET FOR QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
SUPPLEMENTAL INFORMATION SHEET FOR QPL 22520 QUALIFICATIONS HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING QPL-22520-3 10 April 2012 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS
More informationSUPPLEMENTAL INFORMATION SHEET FOR QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
SUPPLEMENTAL INFORMATION SHEET FOR QPL 83519 S HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING QPL-83519-4 3 March 2016 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST OF PRODUCTS
More informationSUPPLEMENTAL INFORMATION SHEET FOR QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
SUPPLEMENTAL INFORMATION SHEET FOR QPL 83519 S HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING QPL-83519-6 10 October 2017 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST OF
More informationSUPPLEMENTAL INFORMATION SHEET FOR QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
SUPPLEMENTAL INFORMATION SHEET FOR QPL 85485 QUALIFICATIONS HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING -6 16 Sept 2014 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST OF
More informationSUPPLEMENTAL INFORMATION SHEET FOR QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
SUPPLEMENTAL INFORMATION SHEET FOR QPL 81969 QUALIFICATIONS HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING -3 5 September 2013 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
More informationTHE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH TEST OR QUALIFICATION REFERENCE
S VALIDATED EVERY TWO YEARS 25-Jan-05 SUPERSEDING QPL-AS1339-22 26-Oct-04 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER SAE AEROSPACE STANDARD SAE-AS1339 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC
More informationThe activity responsible for this QPL is the Defense Supply Center Columbus (DSCC-VQ), Columbus, OH
S VALIDATED EVERY 12 MONTHS 09-Aug-00 SUPERSEDING QPL-83517-12 25-Sep-96 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-C-83517 CONNECTOR, COAXIAL, RADIO FREQUENCY FOR COAXIAL,
More informationTHE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH TEST OR QUALIFICATION REFERENCE
S VALIDATED EVERY 12 MONTHS 11-Jun-02 SUPERSEDING QPL-AS1339-13 06-May-02 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER SAE AEROSPACE STANDARD SAE-AS1339 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC
More informationSEMIANNUALLY 29 November 1996 SUPERSEDING QPL-l May 1996 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION
QUALIFICATIONS VALIDATED QPL-l9978-58 SEMIANNUALLY 29 November 1996 SUPERSEDING QPL-l9978-57 30 May 1996 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-C-l9978 CAPACITORS,
More informationTHE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH TEST OR QUALIFICATION REFERENCE
S VALIDATED EVERY 12 MONTHS 28-Apr-00 SUPERSEDING QPL-49142-14 17-Sep-99 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-49142 CONNECTOR, TRIAXIAL, RADIOFREQUENCY
More informationQUALIFICATIONS VALIDATED QML ANNUALLY 12 February 1998 SUPERSEDING QML November 1997 QUALIFIED MANUFACTURERS LIST
QUALIFICATIONS VALIDATED QML-31032-4 ANNUALLY 12 February 1998 SUPERSEDING QML-31032-3 21 November 1997 QUALIFIED S LIST OF DEPARTMENT OF DEFENSE PERFORMANCE SPECIFICATION MIL-PRF-31032 PRINTED CIRCUIT
More informationYou work hard on your panel. we work hard in your panel. PRODUCTS FOR
You work hard on your panel we work hard in your panel. PRODUCTS FOR 2 PRODUCTS FOR You simply won t find better panel components. Thomas & Betts has everything you need to make your panel better than
More informationANNUALLY 25 July 2002 SUPERSEDING QML March 2002 QUALIFIED MANUFACTURERS LIST PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION
QUALIFICATIONS VALIDATED ANNUALLY 25 July 2002 SUPERSEDING QML-31032-11 19 March 2002 QUALIFIED S LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-31032 PRINTED CIRCUIT BOARD / PRINTED
More informationJan05 Rev A EC
Product Specification Two Circuit Heavy Duty Burner Connector 108-1056 12Jan05 Rev A EC 0990-0059-05 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the
More informationSEMIANNUALLY 29 November 1996 SUPERSEDING QPL September 1996 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION
QUALIFICATIONS VALIDATED SEMIANNUALLY 29 November 1996 SUPERSEDING QPL-15733-95 18 September 1996 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-F-15733 FILTERS AND CAPACITORS,
More informationThe activity responsible for this QPL is the Defense Supply Center Columbus (DSCC-VQ), Columbus, OH TEST OR QUALIFICATION REFERENCE -1-
S VALIDATED SEMIANNUALLY 01-Jun-00 SUPERSEDING QPL-15733-100 14-Jun-99 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-15733 FILTERS AND CAPACITORS, RADIO FREQUENCY
More informationANNUALLY 25 November 1998 SUPERSEDING QML February 1998 QUALIFIED MANUFACTURERS LIST DEPARTMENT OF DEFENSE PERFORMANCE SPECIFICATION
QUALIFICATIONS VALIDATED QML-31032-5 ANNUALLY 25 November 1998 SUPERSEDING QML-31032-4 12 February 1998 QUALIFIED S LIST OF DEPARTMENT OF DEFENSE PERFORMANCE SPECIFICATION MIL-PRF-31032 PRINTED CIRCUIT
More informationProcedure. for. Installation. of the P/N & P/N Voice Alert Systems. Procedure IP 1 Rev. 1. Date
Procedure for Installation of the P/N 2040 1 2 & P/N 2040 1 3 Voice Alert Systems Procedure IP 1 Rev. 1 Date 04 16 03 Approved By Aircraft Components inc. 1040 Harbor Lake Dr. Safety Harbor FL 34695 I.
More information70E Pressure Booster. Bell & Gossett. Bulletin D-215D. Efficient Operation. Easy to Select and Install. Quick Set-up through EZ Start
Bell & Gossett Bulletin D-215D 70E Pressure Booster Efficient Operation Easy to Select and Install Quick Set-up through EZ Start Serial Communication Economical Configuration Bell & Gossett Excellence
More informationPRODUCTS FOR Wiring Duct Power & Grounding Connectors Fastening Products Control Termination Identification Solutions
PRODUCTS FOR Head Office 700 Thomas Avenue Saint-Jean-sur-Richelieu, Quebec J2X 2M9 Tel.: (450) 347-5318 Fax: (450) 347-1976 Wiring Duct Power & Grounding Connectors Atlantic Region Regional Sales Offices
More informationTwo Circuit Heavy Duty Burner Connector
Product 108-1056 11 Oct.16 Rev B Specification EC 0990-0059-05 Two Circuit Heavy Duty Burner Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the
More informationThis instruction sheet covers the Hand Crimping Tools listed in Figure 1, which are used to crimp the terminal types listed in Figure 2.
Figure 1 This instruction sheet covers the Hand Crimping Tools listed in Figure 1, which are used to crimp the terminal types listed in Figure 2. Reasons for reissue are provided in Section 9, REVISION
More informationINSTALLATION. The optional swivel-mounting base is recommended; it positions the crimp loop in virtually any orientation.
The following manufacturer s tools will work in the Universal Power Crimper: AMP, Buchanan, Burndy, Bendix, Berg, Clark, Daniels, Deutsch, Molex-ETC, Hollingsworth, ITT Cannon, Molex, Thomas & Betts and
More informationQualification Testing of Nuclear High Voltage Splice (NHVS) Title Pages: 49. Report Number: EDR-5391 Rev. 0 06/15/05. Approved by: Signature: Date:
Energy Report EDR-5391 Qualification Testing of Nuclear High Voltage Splice (NHVS) Title Pages: 49 Qualification Testing of Nuclear High Voltage Splice (NHVS) Enclosures: Report Number: Date: EDR-5391
More informationJun08 Rev C
Product Specification Connector, Card Edge,.050 Centerline 108-14034 02Jun08 Rev C 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for Tyco Electronics.050 centerline
More informationGREENLEE CUTTING, CABLE STRIPPING, CRIMPING
Manual Crimping Tool 6-Ton -Powered Crimping Tools EK22GL11 K425BG K425O 02064 Crimping Tool with D 3 and O die grooves K425BG 02065 Crimping Tool with D 3 and BG die grooves Designed for crimping a wide
More informationSide Entry Insulation Damage Repair Sleeve (SEIDRS) Raychem Devices Products
1.0 Scope This specification covers the design, performance and qualification requirements for Raychem Side Entry Insulation Damage Repair Sleeve. 1.1 Description. Raychem SEIDRS covered by this specification
More informationPLUGS, RECEPTACLES, AND CONNECTORS OF THE PIN AND SLEEVE TYPE FOR HAZARDOUS LOCATIONS
NEMA FB 11 PLUGS, RECEPTACLES, AND CONNECTORS OF THE PIN AND SLEEVE TYPE FOR HAZARDOUS LOCATIONS NEMA Standards Publication No. FB 11-2000 Plugs, Receptacles, and Connectors of the Pin and Sleeve Type
More informationRead these instructions thoroughly before crimping any terminals.
Figure 1 This instruction sheet covers the application and maintenance procedures for Pneumatic Crimping Head Assembly 314991 1. The crimping head assembly is designed for use in Pneumatic Tool 69015 to
More informationRK12ID Remote Dieless Crimping Tool
INSTRUCTION MANUAL Serial Number RK12ID Remote Dieless Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
More informationJan07 Rev B
Qualification Test Report 501-545 05Jan07 Rev B MT-RJ Patch Panel and Outlet Jacks (Standard, XG, SECURE and SECURE XG) 1. INTRODUCTION 1.1. Purpose Testing was performed on Tyco Electronics MT-RJ Jack,
More informationFIRE ALARM SYSTEM INSPECTION
13555 Wellington Center Circle Suite 123 Gainesville, VA 20155 T: 1-888-883-2867 F: 703-468-6070 www.vectorsecurity.com FIRE ALARM SYSTEM INSPECTION Upon arrival, contact Vector Security Service Dept.
More informationIntroducing Inverted SMT Thru Board Connector
Introducing Inverted SMT Thru Inverted SMT Thru KEY FEATURES Available in 2 through 6 positions Eliminates wire dress management issues with discreet wire leads around the surface of the LED pc board Accepts
More informationInstallation Manual. Model 200QF 8/8 Model 200QF 8/ DC Edge III
Installation Manual Model 200QF 8/8 Model 200QF 8/8 +24 DC Edge III Model 200QF 8/8 +24; Model 200QF 8/8 Part# 1101-1006 (Positive Polarity); 1101-1051 (Negative Polarity) Installation Manual DC Edge III
More informationSOLARLOK Interconnection System Installation Manual
SOLARLOK Interconnection System 1. Safety Note! n The SOLARLOK connector is to be used only to interconnect firmly fixed cables. n Do not disconnect under electrical load! n Electrical current path should
More informationIntroducing Hermaphroditic Blade and Receptacle Connector
Introducing Hermaphroditic Blade and Receptacle Connector Wire-to-Board, Board-to-Board and Dust Cover Hermaphroditic Blade and Receptacle Connector : Wire-to-Board KEY FEATURES Available in 2, 4, and
More information- Residential Fire Sprinkler -
- Residential Fire Sprinkler - Update as of September 15, 2014 The information provided is a state-by-state status of the 2009 IRC adoption and legislation activities as reported by HBA s. NAHB staff monitors
More informationQualification Test Report LightCrimp* Plus Singlemode and Multimode LC Connector (Field Installable)
Qualification Test Report LightCrimp* Plus Singlemode and Multimode LC Connector (Field Installable) 501-586 26Feb09 Rev F 1. INTRODUCTION 1.1. Purpose Testing was performed on Tyco Electronics LightCrimp*
More informationJun08 Rev A
Product Specification Terminal Block Crimp Snap Plug Assembly 108-2319 09Jun08 Rev A 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the Tyco Electronics
More informationMar11 Rev B
Product Specification 108-1576-2 11Mar11 Rev B NETCONNECT*, CHAMP* System 5 Modular Jack Patch Panel 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for NETCONNECT*
More informationNEMA Standards Publication WC Standard for Controlled Impedance Shielded Twisted Pairs in Internal Electrical Cable
NEMA Standards Publication WC 76-2018 Standard for Controlled Impedance Shielded Twisted Pairs in Internal Electrical Cable Published by: National Electrical Manufacturers Association 1300 North 17 th
More informationCertificate of Conformity Certificate num. Registration date Version Valid until
CSIRO Verification Services Highett, Victoria, Australia +61 (0)3 9252 6000 http://www.activfire.gov.au/ Page 1 of 7 Product designation Simplex, Model 4100U/4100U-S1/4100ES/4100ES-S1, fire indicator panel
More informationInsulated High Temperature Hook-Up Wire; Types ET (250 Volts), E (600 Volts), and EE (1000 Volts)
ANSI/NEMA HP 3-2012 Revision of ANSI/NEMA HP 3-2001 American National Standard Insulated High Temperature Hook-Up Wire; Types ET (250 Volts), E (600 Volts), and EE (1000 Volts) Secretariat: National Electrical
More informationRetractable Work Surface Receptacle. Concealed Receptacle Provides Safe and Convenient Desktop Power
Retractable Work Surface Receptacle Concealed Receptacle Provides Safe and Convenient Desktop Power Retractable Work Surface Receptacle Conveniently Puts Power within Your Reach With the variety of electronics
More informationSolderSleeve Shield Terminators
SolderSleeve Shield Terminators Product Facts Transparent insulation sleeve provides encapsulation, inspectability, strain relief, and insulation Prefluxed solder preform provides a controlled soldering
More informationDETAIL SPECIFICATION
INCH - POUND MIL-DTL-38999L 10 May 2012 SUPERSEDING SUPPLEMENT 1 30 May 2008 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH
More informationPOSTING (DATE/TIME): FROM: / 5:00PM UNTIL: / 5:00PM Pgs. 1 of 12
BID NUMBER: ITB-DOT-16/17-9011-GH BID TITLE: FDOT APL Traffic Equipment Supplemental STATE OF FLORIDA DEPARTMENT OF TRANSPORTATION BID TABULATION FAILURE TO FILE A PROTEST WITHIN THE TIME PRESCRIBED IN
More informationHeavy Head Hand Tools , , , and AUG 15 Rev K
Instruction Sheet 408-1261 Heavy Head Hand Tools 59239-4, 59239-8, 59287-2, and 525692 27 AUG 15 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered
More informationFEB 16 Rev T
ORIGINAL INSTRUCTIONS Hand Crimping Tools 46673, 46673-1, and 46988 for STRATO-THERM* Terminals Instruction Sheet 408-1535 12 FEB 16 Rev T PROPER USE GUIDELINES Cumulative Trauma Disorders can result from
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS T CLASS TSA Series 6 to 20 Ton AIR CONDITIONERS 6 20 TONS 506147 01 06/11 Supersedes 3/11 Litho U.S.A. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE IMPORTANT The Clean Air Act
More informationNEMA CODES AND STANDARDS COMMITTEE
NEMA CODES AND STANDARDS COMMITTEE CHAIRMAN David H. Kendall 5/96 Director, Industry Affairs **01/05-09 Thomas & Betts Corp. 01/08 - Parliamentarian Mail Code: 3A-05 *01/2010-8155 T&B Blvd. Memphis, TN
More informationStandards and Safety Update
Standards and Safety Update Presented By: Michael J. Johnston Executive Director Standards and Safety, NECA Update Objectives Update on NFPA 70E and NECA Safety products Update on NECA S National Electrical
More informationRK ton, Single-acting, Die-type Crimping Tool
INSTRUCTION MANUAL RK1550 15-ton, Single-acting, Die-type Crimping Tool Serial Codes GAE Read and understand all of the instructions and safety information in this manual before operating or servicing
More informationPlug shell and receptacle, single cavity, floating, EN Application of modular rectangular modules and shells per EN4165
PRODUCT SPECIFICATION Sep 22, 29 Rev. B CONNECTOR, SINGLE CAVITY, AEROSPACE, PANEL MOUNT, FLOATING, EN416 1 - SCOPE 1.1. Content This document covers the performances, tests, and quality requirements of
More information/Oct/2014 Rev B
Product Specification 108-93042 07/Oct/2014 Rev B Class EA shielded solid Patch cords 1. SCOPE 1.1 Content This specification describes performance and material requirements and tests procedures for TE
More informationNEMA CODES AND STANDARDS COMMITTEE 2014 Roster
NEMA CODES AND STANDARDS COMMITTEE 2014 Roster CHAIRMAN C. D. (David) Mercier 01/00 Director Codes and Standards **01/09-12/12 Southwire Company ****07/11-12/12 Wire & Cable Technology *01/13 One Southwire
More informationMODULAR CONNECTOR 154 (58 AND 96) POS, WATERPROOF PRODUCT SPECIFICATION
MODULAR 154 (58 AND 96) POS, WATERPROOF PRODUCT SPECIFICATION 108-18965 Product Specification 108-18965 10.02. 2011 Rev C1 MODULAR 154 (58 AND 96) POSITION, WATERPROOF CONTENT : 1 PRODUCT OVERVIEW 1.1
More informationTHE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE SUPPLY CENTER COLUMBUS (DSCC-VQ), COLUMBUS, OH , telephone (614)
QUALIFICATIONS VALIDATED EVERY 12 MONTHS 27-Oct-03 SUPERSEDING QPL-50884-53 15-Jan-03 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-P-50884 PRINTED WIRING BOARD, FLEXIBLE
More informationApplication Tooling Specification Sheet
Modular Crimp Head Order No. 63825-7170 Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63825-7100 FEATURES % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically
More informationDETAIL SPECIFICATION
INCH-POUND MIL-DTL-38999M 11 February 2015 DETAIL SPECIFICATION CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, OR BREECH COUPLING), ENVIRONMENT RESISTANT
More informationCat 6 Shielded Patch cords
Product Specification 108-93010 14/Oct/2009 Rev E Cat 6 Shielded Patch cords 1. SCOPE 1.1 Content This specification describes performance and material requirements and tests procedures for AMP NETCONNECT*
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 26 0519 LOW-VOLTAGE ELECTRICAL POWER CONDUCTORS AND CABLES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationIECEx Certificate of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com issue No.:2 Status: Current Certificate history:
More informationNEMA CODES AND STANDARDS COMMITTEE 2014 Roster
NEMA CODES AND STANDARDS COMMITTEE 2014 Roster CHAIRMAN C. D. (David) Mercier 01/00 Director Codes and Standards **01/09-12/12 Southwire Company ****07/11-12/12 Wire & Cable Technology *01/13 One Southwire
More informationHOUSING ASSY 5 POS. HYBRID STD/JR POWER TIMER TAB & REC.
108-37065 Product Specification Rev. A 18-Jan-2007 Housing Assy 5p Hybrid Std./Jr. Power Timer Tab & Rec. DESIGN OBJECTIVES The product described in this document has not been fully tested to insure conformance
More informationINSTALLATION INSTRUCTIONS
SLATE 10 Color Touch Screen Display R8001K1010 INSTALLATION INSTRUCTIONS Scan for more information Application SLATE brings configurable safety and programmable logic together into one single platform.
More informationSECTION ELECTRICAL GENERAL PROVISIONS
PART 1 GENERAL 1.01 SECTION INCLUDES A. General provisions for Electrical Systems B. Wire and cable for 600 volts and less. C. Wiring connectors. D. Electrical tape. E. Heat shrink tubing. F. Wire pulling
More informationE I Delmar Cobble MINOR ELECTRICAL DEMOLITION
PART1 GENERAL 1.01 SECTION INCLUDES A. Electrical demolition. 1.02 RELATED REQUIREMENTS SECTION 26 0501 MINOR ELECTRICAL DEMOLITION A. Section 01 7000- Execution and Closeout Requirements: Additional requirements
More informationDETAIL SPECIFICATION SHEET
DETAIL SPECIFICATION SHEET INCH-POUND MIL-DTL-83521/5A 21 March 2018 SUPERSEDING MIL-M-83521/5 5 August 1985 MAINTENANCE KITS, ELECTRICAL CONNECTORS, CONTACTS AND CONNECTOR AND CABLE ACCESSORIES: MAINTENANCE
More informationCertificate of Compliance
Certificate of Compliance Certificate: 2595099 (LR 7189-177) Master Contract: 164196 Project: 2697346 Date Issued: January 28, 2014 Issued to: Tyco Electronics Corporation 2901 Fulling Mill Rd Mail Stop
More informationSEMIANNUALLY 22 May 2001 SUPERSEDING QPL July 1997 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-39005
QUALIFICATIONS VALIDATED SEMIANNUALLY 22 May 2001 SUPERSEDING QPL-39005-58 9 July 1997 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-39005 RESISTORS, FIXED, WIRE-WOUND
More informationNEMA Standards Publication WC High-Temperature and Electronic Insulated Wire, Impulse Dielectric Testing
NEMA Standards Publication High-Temperature and Electronic Insulated Wire, Impulse Dielectric Testing Published by: National Electrical Manufacturers Association 1300 North 17th Street, Suite 1752 Rosslyn,
More informationhttps://www.te.com/commerce/pcnws/pcnforms?pcndate=03-jul-2012&...
Page 1 of 12 CURRENT DATE: 28-JANUARY-2014 TE CONNECTIVITY PRODUCT CHANGE NOTIFICATION NO: E-12-011457 PCN DATE: 03-JUL-2012 PRODUCT CHANGE NOTIFICATION We would like to inform you about the following
More informationStarTek West Palm Beach Tech Rates 2018
StarTek West Palm Beach Tech Rates 2018 Standard SOW Code Commercial Code Residental Task Price Commercial Residential C.A.1. R.A.1. Travel Time and Common Tasks $17.76 $16.46 Four (4) Product Activity
More informationMar11 Rev C
Product Specification 108-1441 11Mar11 Rev C Connector, Z-PACK*, 2 mm FB, Signal and Power 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the Z-PACK* 2mm
More informationApr06 Rev A
Qualification Test Report LC, Multimode, One-Piece Housing, Fiber Optic Connector 501-628 03Apr06 Rev A 1. INTRODUCTION 1.1. Purpose 1.2. Scope Testing was performed on Tyco Electronics LC multimode, one-piece
More informationCABLE ACCESSORIES WESTERN UNITED ELECTRIC SUPPLY
CABLE ACCESSORIES WESTERN UNITED ELECTRIC SUPPLY TABLE OF CONTENTS 2 Terminators...4-6 Loadbreak Elbows...6-10 Deadbreak Elbows... 10-11 Elbow Accessories... 11 200A Accessories... 12-13 Splices... 13-16
More informationHeavy Head Hand Crimping Tools (HHHT) [ ]
Heavy Head Hand Crimping Tools (HHHT) 220015-[ ] Instruction Sheet 408-2331 19 APR 12 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
More informationAmerican National Standard
ANSI/NEMA HP 5-2013 American National Standard Electrical and Electronic Cross-linked, Modified Polyethylene (XLPE) Insulated 125 C Hook-Up Wire, Types L (600 V), LL (1000 V), and LX (3000 V) Secretariat:
More informationMILITARY/AEROSPACE MARKETS INNOVATIVE SOLUTIONS GUIDE
MILITARY/AEROSPACE MARKETS INNOVATIVE SOLUTIONS GUIDE Solutions for Military/Aerospace Welcome to Sumitomo Electric Interconnect Products, Inc.. Since our inception in 1985, Sumitomo Electric Interconnect
More informationDLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-81381
Specification Details: Specification: MIL-DTL-81381 Title: Wire, Electrical, Polyimide-Insulated Copper or Copper Alloy Federal Supply Class (FSC): 6145 Conventional: Yes Specification contains quality
More informationContacts for Econoseal III Connectors Series.070 (1.8 mm) and Series.250 (6.3 mm)
Series.070 (1.8 mm) and Series.250 (6.3 mm) Introduction Tyco Electronics Econoseal III sealed connector range has been designed to meet the exacting requirements of the automotive industry, for a reliable
More informationIECEx Certificate of Conformity
Certificate : IECEx CSA 09.0001X Page 1 of 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com issue
More informationFLAME ITEM PART NO CLIENT REF. NO. DESCRIPTION DESIGNATION MANUFACTURER CLASS UL FILE NO.
BOM FOR UL CERTIFICATE NUMBER Model Name: CLASSIC TOWER LIGHT Documents Number 122-EI04 This is to certify that the above product was supplied to SUZO Internation (NL) BV Revision A2 are made of the followings,
More informationYour Partner for Custom Interconnectivity Solutions. ISO 9001:2008 AS9100C:2009 ISO 13485:2003 ISO 17025:2005 Qualified
Your Partner for Custom Interconnectivity Solutions ISO 9001:2008 AS9100C:2009 ISO 13485:2003 ISO 17025:2005 Qualified LEMO Precision Custom Connection Solutions The Original Push-Pull Connector Seven
More informationCRIMPERS CRIMPERS. Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com www.eclipsetools.com All dies on pgs3,4, 5 & 6 fit each of these frames Ergo-Lunar Crimp Frame Ergo-Lunar
More informationInstallation Procedure for D-200 series Shielded Cable Splice Kits with MiniSeal Crimp Primary Splices
. Page: Page 1 of 7 Installation Procedure for D-200 series Shielded Cable Splice Kits with MiniSeal Crimp Primary Splices 1.0 Scope This standard contains the procedures for making environment resistant
More information/Oct/2014 Rev E
Product Specification 108-93017 14/Oct/2014 Rev E Cat 6 Unshielded Patch Cords 1. SCOPE 1.1 Content This specification describes performance and material requirements and tests procedures for TE Connectivity
More informationService Data Vickers. Piston Pumps. PVH98/106 Variable Displacement Piston Pump - 11 Design M-2208-S. Revised 05/01/97
Service Data Vickers Piston Pumps PVH98/106 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2208-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
More informationCERTI CRIMP Hand Crimping Tool is used to crimp the closed end splices onto the wire sizes listed in Figure 1.
Figure 1 CERTI CRIMP Hand Crimping Tool 48087 is used to crimp the closed end splices onto the wire sizes listed in Figure 1. Reasons for reissue of this instruction sheet are provided in Section 7, REVISION
More informationGETTING STARTED WITH SMART THERMOSTAT
GETTING STARTED WITH SMART THERMOSTAT This document is the property of Webee L.L.C.. The data contained here, in whole or in part, may not be duplicated, used or disclosed outside the recipient for any
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2016-01-26 Page 1 of 7 Report Reference # E182560-V4-S52 UL TEST REPORT AND PROCEDURE Standard: ANSI/AAMI ES60601-1 (2005/(R)2012 + A1:2012, C1:2009/(R)2012 + A2:2010/(R)2012) - Amendment 1
More information1NT SERIES Fixed Temperature Thermostats
1NT SERIES Fixed Thermostats Key Features WORLD CLASS PERFORMANCE The 1NT has been designed to be applied as a safety device for use in many HVAC and appliance products. Using patented Klixon technology
More informationApplication Tooling Specification Sheet
Modular Crimp Head Order No. 63827-5770 FEATURES Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63827-5700 A full cycle ratcheting hand tool ensures complete crimps Ergonomically
More informationGelCap SL. GelCap SL splice cover kits quickly and con-veniently insulate, seal, and protect stub splice connections up to 1000 volts.
Cold-Applied Splices GelCap SL Stub splice cover kit with connector for use with street lighting (1000 V) 34 Tyco Electronics GelCap SL splice cover kits provide quick installation, dependable performance,
More informationHydraulic Crimping Systems
ORIGINAL INSTRUCTIONS Hydraulic Crimping Systems Customer Manual 409-35004 04 OCT 17 Rev A SAFETY PRES READ THIS FIRST!... 2 SAFETY PRES AVOID INJURY READ THIS FIRST!... 3 1. INTRODUCTION... 4 2. INSPECTION
More information8Electrical Interconnect Products
Electrical Interconnect Products Table of Contents Note: Users should independently evaluate the suitability of the product for their application. Before ordering, check with Tyco Electronics for most
More informationDLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-55302
Specification Details: Specification: MIL-DTL-55302 Title: Connectors, Printed Circuit Subassembly and Accessories Federal Supply Class (FSC): 5935 Conventional: Yes Specification contains quality assurance
More informationSingle- Action Double- Action
Single- Action Double- Action Instruction Sheet (SADA) Hand Tools 45730, 408-1532 46467, 46468, 46469, and 46470 04 AUG 09 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged
More informationStandard Procedure s for Tenant Fire Sprinkler Work
Standard Procedure s for Tenant Fire Sprinkler Work 1. Provide tenant a copy of Simon Property Group Standards for Fire Protection Systems, Section 15400, requesting they in turn would give the standards
More information