Ferrous debris monitoring. Ferrous debris in oil
|
|
- Bernard Fox
- 6 years ago
- Views:
Transcription
1 Ferrous debris monitoring
2 Cause and Effect What causes metallic debris? Bearings Inadequate Lubrication 34.4% Contamination 19.6% Installation Errors 17.7% Overload 6.9% Storage & Handling Errors 2.8% Source SKF USA
3 Cause and Effect What causes metallic debris? Bearings Lubrication failure
4 Cause and Effect What causes metallic debris? Bearings - Spalling
5 Cause and Effect What causes metallic debris? Gears - Polishing Contact surfaces become shiny Low risk Can reduce gear to gear friction
6 Cause and Effect What causes metallic debris? Gears Moderate wear Material is removed at contact face Medium risk Consider bearing/gear replacement
7 Cause and Effect What causes metallic debris? Gears Excessive wear Material uniformly worn away High risk Gear replacement required urgently
8 Cause and Effect What causes metallic debris? Gears Initial pitting Tiny particles worn off contact surface Medium risk Consider bearing/gear replacement
9 Cause and Effect What causes metallic debris? Gears Heavy pitting Significant wear from contact surface High risk Gear replacement required urgently
10 Cause and Effect What causes metallic debris? General wear Overload conditions Lubrication problems
11 Monitoring Fine Debris Particles from bearings Particles from gears Typically 1-850µm Coarse Debris Parts of bearing cages Sheered teeth Typically 0.5mm² upwards
12 Monitoring Fine debris trend analysis Plot of fine debris build up against time (in Days)
13 Monitoring Fine debris trend analysis Plot of fine debris build up against time (in Days) 1) Normal operation
14 Monitoring Fine debris trend analysis Plot of fine debris build up against time (in Days) 1) Normal operation 2) Event occurs causing excessive wear
15 Monitoring Fine debris trend analysis Capture initial wear events early Poor lubrication Contamination
16 Monitoring Coarse debris Alarm condition Plot of course debris build up against time (in Days)
17 Monitoring Coarse debris Alarm condition Plot of course debris build up against time (in Days) 1) Normal operation
18 Monitoring Coarse debris Alarm condition Plot of course debris build up against time (in Days) 1) Normal operation 2) Event occurs
19 Monitoring Coarse debris Alarm condition Failed bearing cage Tooth broken off
20 Monitoring Coarse debris Alarm condition Capture catastrophic events Overload conditions Component failure
21 Monitoring Capturing Debris Magnetic Drain plug Captures debris for inspection or analysis
22 Monitoring Capturing Debris Sample analysis Captures debris from oil for full lab analysis
23 Monitoring Capturing Debris Magnetic Drain Plug Needs to be removed for inspection Sample Analysis Delay on lab turn around example: Not available when at sea
24 Monitoring Capturing Debris
25 SI-900 System Solution Spectrum SI-900 Sensors & Controls Oil Debris Sensors
26 SI-900 System Solution Spectrum SI-900 Sensors & Controls Oil Debris Sensors Multi Channel Microprocessor driven Smart drain plug Fine Debris Channel g to 0.5g Course Debris Channel - 0.5mm² to 368mm² Sensitivity configurable by the user.
27 SI-900 System Solution Spectrum SI-900 Sensors & Controls Oil Debris Sensors 3 Channel Microprocessor driven Smart drain plug 4-20mA 0-5V and 0-10V J1939 CAN
28 SI-900 System Solution Wear debris particles 마모입자
29 SI-900 System Solution FLAKING & CRACK Taper Roller Bearing 의 Thrust Gap 과다에의한편마모증가의원인추정. Damage due to excessive play on the thrust bearings
30 SI-900 System Solution FLAKING Damage due poor lubrication
31 Case Study Summary Customer case study Summary Call to action - thrust bearing problem Call to action - change lubrication Not picked by customers vibration sensors.
32 Case Study Summary Customer case study Summary Planned inspection and down time Avoided line down situation
Comparison of Options for Biosolids Dewatering
Comparison of Options for Biosolids Dewatering Water Environment School 2017 Clackamas Community College 3/28/2017; Session 7 Matt Sprick, PE Carollo Engineers Agenda Dewatering Overview and Purpose Math
More informationWind power Condition Monitoring. Condition Monitoring Systems (CMS) in wind turbines CMS. Authors: Martin Kluge Michael Danitschek
Systems (CMS) in wind turbines CMS Authors: Martin Kluge Michael Danitschek update: 22.07.2010 page 1 Intelligent vibration monitoring of wind turbines Targets Permanent plant/system protection Reduction
More informationDC MOTORS. INTRODUCTION. MAINTENANCE. TESTING. Henry du Preez.
DC MOTORS. INTRODUCTION. MAINTENANCE. TESTING. DC Motor, Armature and commutator. Field frame, with field coils, inter-poles and pole face (compensating) winding. Types of Armature Windings. Lap Winding.
More informationEDITION WITH AUGMENTED REALITY CONTENT
LOW-SPEED UNIVERSAL WASTE SHREDDER TERMINATOR 1 EDITION WITH AUGMENTED REALITY CONTENT Download the Komptech LookBeyond! app. Scan marked and numbered projects with the LookBeyond! eye to see additional
More informationCLEANING FOR EXTENDED TOOL LIFE & IMPROVED TABLET QUALITY. natoli.com
CLEANING FOR EXTENDED TOOL LIFE & IMPROVED TABLET QUALITY natoli.com PROPER TOOL CLEANING IS CRUCIAL EXTEND TOOL LIFE DECREASE PRESS DOWNTIME REDUCE PRODUCTION-RELATED COSTS IMPROVE TABLET QUALITY Tablet
More informationCrushers, Mills and Stock Treatment
Chapter Crushers, Mills and Stock Treatment 11 Crushers (CR)... 11-3 Flakers (FL)... 11-6 Mills (M)... 11-7 Stock Treatment (ST)... 11-8 G2 ICARUS Corporation, 1998. 11-2 ICARUS Reference ICARUS Corporation,
More informationUPGRADE YOUR OFFERING UPGRADING THE VENTED OPTO-MATIC TO A CLOSED SYSTEM OPTO-MATIC
UPGRADE YOUR OFFERING UPGRADING THE VENTED OPTO-MATIC TO A CLOSED SYSTEM OPTO-MATIC Opto-Matic Types VENTED OPTO-MATIC CLOSED SYSTEM OPTO-MATIC External Air Exchange Check Valve for Exchange of Clean/Dry
More informationSIZE REDUCTION TECHNOLOGY
SIZE REDUCTION TECHNOLOGY HOSOKAWA BEPEX Size Reduction Technology Process Solutions for Granulation Requirements BEPEX offers a variety of techniques tailored to meet the requirements of your business.
More informationMHC Series Sensors
MHC - 4000 Series Sensors Smart Sensors for Permanent Installation Shaft Speeds above 30 RPM & 0.25-60 RPM Sigma Sensors for Intermittant Operation Kittiwake Holroyd Ltd A Kittiwake Group Company The MHC
More informationSmall size, big energy savings
ATOX coal mill 2 Small size, big energy savings Key benefits - Handles all types and capacities of coal - Reliable, long-lasting operation - Simple, flexible operation - Superior separation efficiency
More informationELECTRIC POWERHEAD OWNER S MANUAL. Review this manual before operating your EDGE Electric Powerhead
ELECTRIC POWERHEAD OWNER S MANUAL Review this manual before operating your EDGE Electric Powerhead Copyright 2009 H-P Products, Inc. TABLE OF CONTENTS Subject Page Safety Instructions...3 Assembling your
More informationHT650 TM FAN DRIVE SERVICE INSTRUCTIONS
HT650 TM FAN DRIVE SERVICE INSTRUCTIONS When unpacking your product, remove all components and inspect them to ensure that no damage occurred during shipping. If any components are missing or damaged,
More informationE. debrun GICHD Operations 27/06/14
Machine-Integrated Magnetic Collector: Design and Testing Erik de Brun GICHD Consultant (Ripple Design) Consultant, Mechanical Systems, Operational Efficiency, and Technology Page 1 Motivation Mechanical
More informationSteele Extrusion Machinery
Steele Extrusion Machinery Vacuum System The Best in Clay Machinery Since 1889 J.C. STEELE & SONS, INC. P.O. Box 1834 Statesville, NC USA 28687 TEL: (704) 872-3681 FAX: (704) 878-0789 web site: www.jcsteele.com
More informationSPECIFICATION DELETED SECTION CENTRIFUGAL HVAC FANS
SECTION 23 34 16 CENTRIFUGAL HVAC FANS PART 1 - GENERAL 1.01 RELATED DOCUMENT A. Drawings and general provisions of the contract, including General and Special Conditions and Division 01 Specification
More informationSELF-PRIMING CENTRIFUGAL PUMPS BMLS-M & BMLS-H
SELF-PRIMING CENTRIFUGAL PUMPS BMLS-M & BMLS-H INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS HP Phase Medium Head High Head 3 1 BMLS 300 M BMLS 300 H 3 3 BMLS 300 M3 BMLS 300 H3 5 1 BMLS 500 M BMLS
More informationMill, Microcut Grinder STANDARD OPERATING PROCEDURE
STANDARD OPERATING PROCEDURE Mill, Microcut Grinder Model: MC-15 Manufacturer: Stephan Machinery, Inc. Location: Wet Processing Pilot Plant, 1091 Food Sciences Building Publication Date: 07/23/2014 Iowa
More informationBVM Corporation SERIES G ELEVATOR 100, 150,175, 250, 350 & 500 Tons
Page 1 BVM Corporation SERIES G ELEVATOR 100, 150,175, 250, 350 & 500 Tons Part number: Serial Number: Safety CAUTION: Practice safety in the operation and maintenance and use only approved safety methods,
More informationSeidenader. for Tablets and Capsules
Seidenader Inspection Machines Seidenader Inspection and Sorting Machines for Tablets and Capsules The family of Seidenader inspection and sorting machines is a system designed to increase packing line
More informationIce Maker - Dispensers. Technical Training
Ice Maker - Dispensers Technical Training Presentation Topics Topic 1: Nugget Ice Maker Dispensers MDT5N, MDT6N Topic 2: Flaked Ice Maker Dispensers MDT3F, MDT4F Topic 3: Cubelet Ice Maker Dispenser MDT2
More informationAXPR Wall Mounted Axial Panel Fans
Bulletin 78-January-03-06 AXPR Wall Mounted Axial Panel Fans INSTALLATION, OPERATION, AND MAINTENANCE MANUAL This publication contains the installation, operation and maintenance instructions for the AXPR
More informationOIL-FREE ROTARY SCREW COMPRESSORS Fixed Speed Regulated Speed (RS) D75 D275 INTELLIGENT AIR TECHNOLOGY
03 OIL-FREE ROTARY SCREW COMPRESSORS Fixed Speed Regulated Speed (RS) D75 D275 INTELLIGENT AIR TECHNOLOGY D75 D275 OIL-FREE ROTARY SCREW COMPRESSORS AIR & WATER COOLED FIXED & REGULATED SPEED The CompAir
More informationSeparator Classifier. MTRB
Separator Classifier. MTRB Excellent separating efficiency. High quality. Separator MTRB with aspiration channel MVSH. Application This machine, designed to meet high demands, is typically applied in flour
More informationINSTALLATION MANUAL FOR ROTARY TWIN LOBE (ROOTS) BLOWERS / COMPRESSORS
INSTALLATION MANUAL FOR ROTARY TWIN LOBE (ROOTS) BLOWERS / COMPRESSORS AIRVAC INDUSTRIES & PROJECTS CORPORATE OFFICE: H-2/111, SECTOR-16, ROHINI, DELHI-110 085 PHONE: +91-11-32958731, 27298061 FAX: +91-11-27298061
More informationBest practices in Cleaning and Safety
Best practices in Cleaning and Safety Agenda Cleaning/maintenance of equipment Safety precautions Cleaning/maintenance of consumables Cleaning of specimens Other tips and tricks Cleaning/maintenance of
More information46920 County Rd E Center, CO Phone: Fax: Pump Rebuild Report. Union/Flowserve 6x8 MQF, 7 stage
46920 County Rd E Center, CO 81125 Phone: 719-754-1981 Fax: 719-754-1982 Pump Rebuild Report Union/Flowserve 6x8 MQF, 7 stage April, 2016 Pump Rebuild Report PZE 10625 Page 1 Contents Page Project Data...
More informationMill, Ultra-Centrifugal STANDARD OPERATING PROCEDURE
STANDARD OPERATING PROCEDURE Mill, Ultra-Centrifugal Model: ZM-1 Manufacturer: Retsch GmbH & Co. KG Location: Dry Processing Pilot Plant, 1851 Food Sciences Building Publication Date: 08/29/2014 Iowa State
More informationMeets the Highest Standards in Sanitary Cleaning
Meets the Highest Standards in Sanitary Cleaning Application The Toftejorg SaniJet 20 is a sanitary, rotary jet head device that cleans in a 360o indexed pattern. Designed for permanent installation, the
More informationINSTALLATION, OPERATION, AND MAINTENANCE MANUAL
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL TUBE AXIAL FANS BTA, WTA, HTA, DDA The purpose of this manual is to aid in the proper installation and operation of the fans. These instructions are intended
More informationCrushing Plant--ZYS High-Efficient Cone Crusher
Crushing Plant--ZYS High-Efficient Cone Crusher >> E-Mail:joyal@crusherinc.com >> Http://www.joyalcrusher.com Shanghai Joyal Mining Machinery Co., Ltd ZYS High-Efficient Cone Crusher Profile The JOYAL
More informationTOS-002-US Gear Hobbing Machine TH 350 CNC
TOS-002-US-02-2018 1 Gear Hobbing Machine TH 350 CNC 1. MAIN FEATURES Gear hobbing machine TH 350 CNC is numeric controlled machine with seven CNC controlled axis designed for high speed hobbing of spur
More informationDESCRIPTION IMPELLER INSPECTION MAINTENANCE POWER CORD REPLACEMENT IMPELLER REPLACEMENT MECHANICAL SEAL REPLACEMENT IMPELLER INSPECTION /REPLACEMENT
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationACORE Filtration Co.,Ltd provides engineering,
Oil Filtration Systems For Every Demanding Application VLF Lube Oil Purifier ACORE Filtration Co.,Ltd provides engineering, manufacturing, sales of industrial oil filtration systems, we have been striving
More informationTop of the World Tower
Workplace Building Preventive Maintenance Checklist conducted for Top of the World Tower Conducted on 22 Oct 2018 11:00 AM Prepared by Greg Langley Location 1247 Dartmouth St, Albany, CA 94706, USA Completed
More informationROTO-PACKER The Originals. Made by HAVER. Progress and Quality for the 21st Century HAVER & BOECKER HAVER & BOECKER. Information HAVER & BOECKER
HAVER & BOECKER HAVER & BOECKER Progress and Quality for the 21st Century The HAVER ROTO-PACKER series RL designates a rotating valve type bag filling machine (with 3, 4, 6, 8, 10 or 12 spouts) according
More informationHeat Transfer. Heat Transfer. Thermal Equilibrium. Thermal Inequilibrium
Heat Transfer, Radiation Convection and Heat Transfer Heat is a form of energy. Heat travels from higher temperature(hotter) region to lower temperature(cooler) region. Two bodies are in thermal equilibrium
More informationRockmaster Super Black Diamond Black Diamond Cobra SINGLE ROLL CRUSHERS
S I N C E 1 8 3 5 Rockmaster Super Black Diamond Black Diamond Cobra SINGLE ROLL CRUSHERS SINGLE ROLL CRUSHERS Why use a Single Roll Crusher? 1. The single roll crusher reduces large size particles in
More informationDIESEL ENGINE AUTOMATICS
DIESEL ENGINE AUTOMATICS MANUAL Address: UTE d.o.o. ULJANIK TESU ELEKTRONIKA Flaciusova 1 52100 PULA REPUBLIC of CROATIA Phone: +385 (52) 38 53 50 Fax: +385 (52) 38 53 51 E-mail ute@pu.hinet.hr Cat. N.:
More informationMonitoring of Electrical Equipment Failure Indicators and Alarming
Past, Present and Future Maintenance Practices: Monitoring of Electrical Equipment Failure Indicators and Alarming Author: Gabe Paoletti, P.E. Eaton Corporation Senior Member, IEEE gabrieljpaoletti@eaton.com
More informationONE OF the biggest challenges in composting
Air Separation Strategies Tackle Plastics Contamination Robert Rynk ONE OF the biggest challenges in composting municipal solid waste, yard trimmings and food residuals is dealing with plastic. To keep
More informationHydraulic Crimping Head, PN 69069
Hydraulic Crimping Head, PN 69069 Instruction Sheet 408-1745 31 JUL 17 Rev F 1. INTRODUCTION Figure 1 This instruction sheet covers application, inspection and maintenance procedures for DYNA-CRIMP* Crimping
More informationSOLVING WINDMILLING PROBLEMS ON BELT ACHE FAN SYSTEMS
SOLVING WINDMILLING PROBLEMS ON BELT ACHE FAN SYSTEMS HOW TO IMPROVE WORKER SAFETY AND REDUCE MAINTENANCE Introduction If your solution to stopping a back-spinning ACHE fan is to apply your hand to the
More informationFAMSUN SDZB3000 Zoned Belt Dryer. Quick Manual
FAMSUN SDZB3000 Zoned Belt Dryer Quick Manual For operation and maintenance Has no legal effect Please refer to the product instruction for more information Catalog: 1.Maintenance of the air duct system
More informationCaution PROTECT YOUR FACTORY WARRANTY!
6 Cleaning Caution PROTECT YOUR FACTORY WARRANTY! The recommended cleaning procedures must be performed to maintain your factory warranty. Allow only Zebra authorized technicians to service the Printer
More informationSKF WireRace and inserted raceway bearings for weight savings and consistent friction torque
SKF WireRace and inserted raceway bearings for weight savings and consistent friction torque Benefits Wire race and inserted raceway bearings were introduced by SKF in Europe and by Kaydon in the USA in
More informationTHE CHANGE IN GEAR ENGINEERING
THE CHANGE IN GEAR ENGINEERING THE GEARING OF THE FUTURE IS ELECTRIFIED, AUTOMATED AND NETWORKED. GEARCONTROL: i:gear 4.0 GEARCONTROL-SYSTEM GEARCONTROL-OIL EISENBEISS LEADING THE WAY IN SPECIAL GEAR ENGINEERING
More informationCYBAS-i Cone High Performance Cone Crushers
CYBAS-i General Dimensions CYBAS-i Cone High Performance Cone Crushers O + ) 2 8 8 IMS Engineering (Pty) Ltd Physical Adress: 10 Derrick Road, Spartan, Kempton Park, 1625 South Africa Postal Address: PO
More informationTel: Fax: Website:
Vacuum Dehydration Oil Purification System(Oil Purifier) The water and particles contamination in lubrication, hydraulic and dielectric oils badly affect the oils performance and threaten system reliability.
More informationIntroduction to Compaction
Introduction to Compaction By Wade McCone Copyright 2006 The Evergreen Marketing Group Includes material courtesy of Stone Construction Equipment Co.; used by permission Overview - Compaction Principles
More informationAIR HANDLING UNITS Vibration Isolation Air Filtration Equipment Ductwork.
SECTION 15855 AIR HANDLING UNITS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15240 - Vibration Isolation. 2. 15885 - Air Filtration Equipment. 3. 15890 - Ductwork. 1.02 REFERENCES A. Air Moving
More informationSince giving rise to the elevator industry more than 150 years ago, Otis has been at the forefront of elevator technology.
OTIS SKY Since giving rise to the elevator industry more than 150 years ago, Otis has been at the forefront of elevator technology. Through the years, Otis team of professional engineers and designers
More informationDZ Series Shredder 2 in 1
Shredder 2 in 1 WE CARE DZ series in operation Shredding of waste wood / pallets Powerful and flexible 2 in 1 The Combined Shredder One machine for many kinds of materials The combined solution The solves
More informationPond Pump 280 / 420 / 575. Operating instructions Notice d emploi Instrucciones de uso
Pond Pump 280 / 420 / 575 Operating instructions Notice d emploi Instrucciones de uso REMINDER CALL 1-866-627-3435 BEFORE RETURNING TO STORE. Part Description QTY A Pump 1 B 3/4 in. ID tubing adapter with
More informationUPZ PUMP POWER FOR TOP PERFORMANCE UNDER
Submersible borehole pump People at KSB we make your world flow round! UPZ PUMP POWER FOR TOP PERFORMANCE UNDER THE TOUGHEST CONDITIONS UPZ is top choice wherever submersible borehole pumps have to satisfy
More informationKice Dust Control System Design and Maintenance Basics Design, Maintenance, & Operation
Kice Dust Control System Design and Maintenance Basics Design, Maintenance, & Operation Kurt Meyers September 18, 2014 Topics of Discussion Why and Where do we need Dust Control? System Design Objectives
More informationMAJOR CONCERN on your GENERATORS?
Is STATOR WINDING CONDITION a MAJOR CONCERN on your GENERATORS? Early detection of winding vibration is a key component in preventing forced outages caused by insulation system failures. Our Fiber Optic
More informationTH450A-CRB TH550A-CRB THP550-CRB/TS3000
TH450A-CRB TH550A-CRB THP550-CRB/TS3000 INSTRUCTION MANUAL CLEAN TYPE INDUSTRIAL ROBOT SPECIFICATIONS Notice Make sure that this instruction manual is delivered to the final user of Toshiba Machine s industrial
More informationMCV - MCH - MCHZ Multistage pumps
MCV - MCH - MCHZ Multistage pumps You can put pressure on them! We offer you a range of reliable high-pressure multistage pumps. It includes a series of horizontal pumps, MCH and a series of vertical pumps,
More information2.5mm CLEANCLICKER 750 Fiber Optic Cleaner Performance Verification Report OptiTap-Style Connectors
2.5mm CLEANCLICKER 750 Fiber Optic Cleaner Performance Verification Report OptiTap-Style Connectors April 2016 www.sticklerscleaners.com STICKLERS 2.5mm CLEANCLICKER 750 Fiber Optic Cleaner Performance
More informationBELT DRIVEN STATIONARY AGITATOR
BELT DRIVEN STATIONARY AGITATOR INSTRUCTION MANUAL www.usfarmsystems.com 2955 S. K Street Tulare, CA. 93274 (559)685-0340 (800)811-9462 Fax (559)685-9160 Revision Date 9/7/2017 TABLE OF CONTENTS How to
More informationHydraulic Crimping Head, PN
Hydraulic Crimping Head, PN 1673672-1 Instruction Sheet 408-8910 14 JUL 17 Rev C PROPER USE GUIDELINES Cumulative trauma disorders can result from the prolonged use of manually powered hand tools. Hand
More informationLUREN Precision Co.LTD.
Precision Co.LTD. Head Office: Li Hsing Factory Location: Hsin Chu Science Park - Taiwan www.luren.com.tw Head Office: Via Marconi, 8 Viganò Brianza (LC)- Italy www.fubri.it Luren Hob Resharpening Machines
More informationBliss Box Former Troubleshooting. 6.1 Troubleshooting Chart. Troubleshooting INTRODUCTION SAFETY PROCEDURES
6.0 Bliss Box Former 1.0 INTRODUCTION Table 6-1 provides a logical sequence of tests that are designed to isolate problems with the Bliss Box Former machines. This table includes a list of probable causes
More informationMounting bearings using heat
9 Mounting bearings using heat The force needed to mount a bearing increases considerably with the size of the bearing. If the heat expansion of metals is made use of, bearings or other ring-shaped parts
More informationCENTRIFUGAL PUMPS. STATE the purposes of the following centrifugal pump components:
Pumps DOE-HDBK-1018/1-93 CENTRIFUGAL PUMPS CENTRIFUGAL PUMPS Centrifugal pumps are the most common type of pumps found in DOE facilities. Centrifugal pumps enjoy widespread application partly due to their
More informationPRODUCTION EQUIPMENT
PRODUCTION EQUIPMENT ABOUT VDS VDS has been created as a team of passionate, skilled and experienced people in area of production equipment and special, custom projects in wide area. Team includes mechanical
More informationGuideLine 2. Highly Visible Alignment Lasers for Visually Demanding Surfaces
Highly Visible Alignment Lasers for Visually Demanding Surfaces The Guideline 2 Range The provides a reliable and robust industrial alignment laser for a wide range applications including the alignment
More informationSewage Pumps. KS - Channel Type Pumps W, WTS - Vortex Type Pumps
Sewage Pumps KS - Channel Type Pumps W, WTS - Vortex Type Pumps Design KS Technical Data Performance Range: m Capacity up to 500m 3 /h (2200USgpm) m Head up to 45m (150feet) m Speed up to 1450rpm Sizes:
More informationCombiGrinder. Instruction manual. Grinder for cattle, horse and pet clipper blades. swiss made. Version/Index: CombiGrinder/A 09-16
swiss made CombiGrinder Grinder for cattle, horse and pet clipper blades Instruction manual Version/Index: CombiGrinder/A 09-16 1 Instruction manual / CombiGrinder Contents 1 Safety regulations 1.1 Symbols
More informationThank You for Attending Today s Webinar:
www.lesman.com/train/ Thank You for Attending Today s Webinar: ASME Boiler Code Requirements for Drum Level Your Host Mike DeLacluyse President Lesman Instrument Co miked@lesman.com Featured Speaker Jim
More informationCASE STUDY ANALYSIS OF CENTRIFUGAL FAN HIGH AMPLITUDE VIBRATION. Ken Singleton
CASE STUDY ANALYSIS OF CENTRIFUGAL FAN HIGH AMPLITUDE VIBRATION Ken Singleton Manager KSC Consulting LLC, Bristol VA ksingleton@vibrationconsulting.com Bob McGinnis. P.E. McGinnis Engineering LLC, Kingsport
More informationSIHI Dry GD S Sizes S450, S650
SIHI Dry GD S Sizes S450, S650 Single Stage Vacuum System - General Design Dry Running Screw Vacuum Pump Experience In Motion Pressure range: Pumping Speed: < 0.001 to 1013 mbar 0.00075 to 760 torr 450
More informationWHY SULLAIR? For more information on the IHI-Sullair joint venture, please visit 2,000th IHI-Sullair centrifugal
WHY SULLAIR? Since 2004 Sullair has been part of IHI-Sullair, a joint venture focused on developing and producing high performance centrifugal compressors. Those compressor models, with more than a decade
More informationSample processing in the laboratory
Sample processing in the laboratory Size reduction Analysis screens Dividing & Splitting Size Reduction Machines Jaw crusher Jaw crushers are suited for crushing brittle, moderately to very hard materials
More informationSentry G3 Machinery Protection Monitor
TECHNICAL INFORMATION Sentry G3 Machinery Protection Monitor CONDITION MONITORING SOLUTIONS The Sentry G3 Machinery Protection Monitor is a high performance signal conditioning unit; providing a universal
More informationMonitoring Pump Performance with Vibration. Mitchell Stansloski, PhD, PE
Monitoring Pump Performance with Vibration Mitchell Stansloski, PhD, PE Centrifugal Pumps Centrifugal pumps Centrifugal Pumps (Radial Flow Pumps): A pump using radial flow impellers that give their energy
More informationDS series STERLING PUMPS. Industrial End Suction Pumps ISO/DP
DS series Industrial End Suction Pumps ISO/DP 5199 www.sterlingpumps.com.au DS series Capacities from: Heads from: 340 to 5,680 m3/h (1,500 to 25,000 USPGM) 21 to 106 metres (70 to 350 feet) Power range
More informationECO-ANT21 Corporation
ANT Turbo blower - Summary Turbo Blower is a device generating compressed air using an applied air bearing, impeller, high speed motor, inverter and controller connected to a robust centrifugal turbine
More informationCS Cone Crusher. Reach new height with KEFID
CS Cone Crusher MACHINERY CO.,LTD Address:National HI-TECH Industry Development Zone, Zhengzhou, China E-mail:Sales@kefid.com Website:www.kefid.com Brief Introduction: CS cone crusher is a kind of high
More informationService Manual Trash Compactor Models 15XESSEXF A November 2010 Broan-NuTone LLC 926 West State Street Hartford, WI
Service Manual Trash Compactor Models 15XESSEXF 99044663A November 2010 Broan-NuTone LLC 926 West State Street Hartford, WI 53027 1-800-637-1453 2 Safe Servicing Practices Safe Servicing Practices To avoid
More informationProgressive Safety Services LLC 1
Progressive Safety Services LLC 1 Progressive Safety Services LLC 2 Late 1970 s a series of devastating grain elevator explosions left 59 people dead and 49 injured. In 1987 OSHA published the Grain Handling
More informationTO DEVELOPE TECHNIQUES TO CONTROL THE DISTORTION IN WASHER
TO DEVELOPE TECHNIQUES TO CONTROL THE DISTORTION IN WASHER ANURODH KHIRE 1, LAUKIK RAUT 2, SANDESH POTNIS 3 1 Student, Department of Mechanical Engineering, G. H. Raisoni College of Engineering, Maharashtra,
More informationSmarter Washing Solutions SAND SCREW
Smarter Washing Solutions Screw Washer Range Around the globe, the Mining and Minerals industry is met with challenges and uncertainty. There is a growing need to meet today s stringent specifications
More informationEDR Series. Model. Instruction Manual. Rev 5.0. Thank you for purchasing the EDR Auto Smart.
EDR Series Model Instruction Manual Rev 5.0 Thank you for purchasing the EDR Auto Smart. Please read this Instruction Manual thoroughly before using this machine. Please carefully read and thoroughly understand
More informationPumps SELECTION OF A PUMP
Pumps SELECTION OF A PUMP A water system needs to move the water produced from the source to its customers. In almost all cases in Minnesota, the source is at a lower elevation than the user so the water
More information? Radiation. Radiation. How does heat energy get from the Sun to the Earth?
How does heat energy get from the Sun to the Earth? Radiation There are no particles between the Sun and the Earth so it can not travel by conduction or by convection.? Radiation Radiation Thermal radiation
More informationREAD AND SAVE THESE INSTRUCTIONS. Air Boss Model T5200 Custom Packaged Electronic Air Cleaner. TRION
READ AND SAVE THESE INSTRUCTIONS Air Boss Model T5200 Custom Packaged Electronic Air Cleaner TRION Installation, Operation, & Service Manual Electrostatic Precipitators for Commercial & Industrial Applications
More informationRich Knoelke. Questions or Comments: Mulcahy Shaw Water.
Rich Knoelke Mulcahy Shaw Water Questions or Comments: rknoelke@mulcahyshaw.com CASE STUDY LaCrosse WI WWTP Four New Turbo Blowers New Diffusers with Tapered Layout DO Control System Automated Air Valves
More informationSentry G3 Machinery Protection Monitor
TECHNICAL INFORMATION Sentry G3 Machinery Protection Monitor CONDITION MONITORING SOLUTIONS The Sentry G3 Machinery Protection Monitor is a high performance signal conditioning unit; providing a universal
More informationSECTION XXXXX POSITIVE DISPLACEMENT BLOWER WITH SOUNDSEAL COMPACT ENCLOSURE
SECTION XXXXX POSITIVE DISPLACEMENT BLOWER WITH SOUNDSEAL COMPACT ENCLOSURE PART 1 GENERAL 1.01 SECTION INCLUDES A.) Provide one (1) rotary positive displacement blower and all related appurtenances assembled
More informationVibration Of Cooling Tower Fans. Barry T. Cease Cease Industrial Consulting Vibration Institute 2015
Vibration Of Cooling Tower Fans Barry T. Cease Cease Industrial Consulting Vibration Institute 2015 ceasevibration@icloud.com (843) 200-9705 1 WHAT IS A COOLING TOWER AND WHAT DOES IT DO? All cooling towers
More informationROWA -HP High-Pressure Centrifugal Pump
ROWA -HP High-Pressure Centrifugal Pump 2 Pump Type ROWA -HP Quality through Experience Fields of Application Handling of clean to slightly contaminated corrosive liquids up to discharge pressures of 100
More informationSMGL. Low-speed Granulator. Related Patent Pending: Japan 1. Summary
SMGL Low-speed Environment and User Friendly Easy Maintenance Related Patent Pending: Japan 1 Summary SMGL is the standard for the low-speed granulators. The non-screen construction reduces the formation
More informationDEIF A/S. Description of options. Option M17, Configurable inputs and RPM supervision Engine Controller EC-1/EC-1M. Description of option
Description of options Option M17, Configurable inputs and RPM supervision Engine Controller EC-1/EC-1M 4189340401D SW 1.4X.X Description of option Functional description DEIF A/S Parameter list DEIF A/S,
More informationMounting bearings using heat
9 Mounting bearings using heat The force needed to mount a bearing increases considerably with the size of the bearing. By using the heat expansion of metals, bearings or other ringshaped parts can easily
More informationA. Section includes Factory Packaged, Modular units, providing cooling and heating for air distribution systems.
15855 AIR HANDLING UNITS SPECIFIER: CSI MasterFormat 2004 number: 237313 PART 1 GENERAL 1.1 SUMMARY A. Section includes Factory Packaged, Modular units, providing cooling and heating for air distribution
More informationAggregates Table 1 No. Title Options
Aggregates Table 1 BS EN 932-1 Methods for sampling From stockpiles BS EN 932-2 Methods for reducing laboratory samples BS EN 932-3 BS EN 933-1 BS EN 933-2 Procedure and terminology for simplified petrographic
More informationFAN ENGINEERING. Fan Installation, Operation & Maintenance
FAN ENGINEERING Information and Recommendations for the Engineer FE-500 Fan Installation, Operation & Maintenance How to Avoid Problems with Your Fan Introduction This document presents ways to avoid the
More informationFarm Energy IQ. Farms Today Securing Our Energy Future. Tom Manning, New Jersey Agricultural Experiment Station
Farm Energy IQ Farms Today Securing Our Energy Future Energy Efficiency for Direct Market Farms Tom Manning, New Jersey Agricultural Experiment Station Farm Energy IQ ENERGY EFFICIENCY FOR DIRECT MARKET
More informationFAN ENGINEERING. Fan Installation, Operation & Maintenance
FAN ENGINEERING Information and Recommendations for the Engineer FE-500 Fan Installation, Operation & Maintenance How to Avoid Problems with Your Fan Introduction This document presents ways to avoid the
More information