TECNOIL 150 M INDUSTRIAL VACUUM FOR CHIPS AND OIL RECOVERY. Tension Volts/Hertz 230/50 Motors N. 2

Transcription

1 TECNOIL 150 M INDUSTRIAL VACUUM FOR CHIPS AND OIL RECOVERY Tension Volts/Hertz 230/50 Motors N. 2 2,5 3,3 Max Vacuum Rate* mm.h2o 2800 Max Air Flow** M3/h 380 Filter surface cm Capacity (liquid) Lt. 150 Capacity (solid) Lt. 40 Noise level db 76 Dimensions cm 60x70 Height cm 125 Weight Kg 75 - Mobile, compact and powerful, the vacuum cleaner TECNOIL is the ideal machine to suck up liquid (oil or ) mixed with metal chips, separate the oil from the chips and recover or dispose of the liquid - The suction is provided by two by-pass 3 stage motors, placed inside a sturdy steel casing and providing high depression (max 280 mbar) and operated by independent switches. A vacuum indicator is installed in order to detect possible clogging or anomalies in the suction; the motor head is protected from liquid and solid material through a nylon filter. The suction unit is protected by a nylon filter and a floating device, automatically stopping the suction when the liquid fills up the container. - A metal sieve grid (40 litres capacity) withholds the solid material (chips and metal parts ), while the clean oil goes into the lower container (capacity 150 litres). It is then possible to discharge it, by means of a 2 mt. discharge oil proof hose fitted with a gun and valve. - The container is made of polyester coated steel, compact and easy to move; two baskets provide a support for tools and hoses when not used. - The vacuum cleaner is mounted on a solid steel trolley, equipped with braking and turning wheels Optionals - Polypropylene filter (efficiency 300 or 100 micron) for further and finer filtration of the liquid. - Suction from machine tools of oils and s mixed with metal chips or other solid material - Reduced stand-by time of machine tools - Saving by recovering and using several times the same oil and

2 TECNOIL 150 MP INDUSTRIAL VACUUM FOR CHIPS AND OIL RECOVERY Voltage Volts Hertz Motors N (110) 50/60 2,8 3,7 Max Vacuum Rate* mm.h2o 2800 Max Air Flow** M3/h 380 Filter Surface cm Capacity (liquid) Lt. 150 Capacity (solid) Lt. 40 Noise level db 76 Pump Rate Lt./Min 300 Dimensions cm 60x70 Height cm 125 Weight Kg 85 - Mobile, compact and powerful, the vacuum cleaner TECNOIL is the ideal machine to suck up liquid (oil or ) mixed with metal chips, separate the oil from the chips and recover the oil thanks to a powerful electric pump. - The suction is provided by two by-pass 3 stage motors, placed inside a sturdy steel casing and providing high depression (max 280 mbar) and operated by independent switches. A vacuum indicator is installed in order to detect possible clogging or anomalies in the suction; the motor head is protected from liquid and solid material through a nylon filter and a floating device, automatically stopping the suction when the liquid fills up the container. - A metal sieve grid (40 litres capacity) withholds the solid material (chips and metal parts ), while the clean oil goes into the lower container (capacity 150 litres). It is then possible to pump it out rapidly, through a powerful electric pump (300 litres per minute), fitted with a 2 mt. discharge oil proof hose fitted with a gun and valve. - The container is made of polyester coated steel, compact and easy to move; two baskets provide a support for tools and hoses when not used. - The vacuum cleaner is mounted on a solid steel trolley, equipped with braking and turning wheels Optionals - Polypropylene filter (efficiency 300 or 100 micron) for further and finer filtration of the liquid. - Suction from machine tools of oils and s mixed with metal chips or other solid material - Reduced stand-by time of machine tools

3 - Saving by recovering and using several times the same oil and - Possibility to suck up and pump out simultaneously

4 TECNOIL 151 T3 INDUSTRIAL VACUUM FOR OIL AND COOLANT RECOVERY Voltage Volts Hertz 230/400 50/60 Max Vacuum Rate* mm.h2o 3000 Max Air Flow** M3/h 300 Filter Surface cm Capacity (liquid) Lt. 150 Capacity (solid) Lt. 40 Noise level db 76 Pump Rate Lt./Min 300 Dimensions cm 60x70 Height cm 125 Weight Kg Mobile, compact and powerful, the vacuum cleaner TECNOIL is the ideal machine to suck up liquid (oil or ) mixed with metal chips, separate the oil from the chips and recover the oil thanks to a powerful electric pump. - The suction unit is a turbine motor of the side channel blower type: the fan being directly shafted on the motor shaft, this type of motor requires no transmission system and provides a performance of RPM. It is thus completely maintenance free, ideal for nonstop and heavy duty performance, very silent and resistant, matching an IP 55 level. The suction unit is protected by a nylon filter and a floating device, automatically stopping the suction when the liquid fills up the container. - A metal sieve grid (40 litres capacity) withholds the solid material (chips and metal parts ), while the clean oil goes into the lower container (capacity 150 litres). It is then possible to pump it out rapidly, through a powerful electric pump (300 litres per minute, fitted with a 2 mt. discharge oil proof hose fitted with a gun and valve. - The container is made of polyester coated steel, compact and easy to move; two baskets provide a support for tools and hoses when not used. - The vacuum cleaner is mounted on a solid steel trolley, equipped with braking and turning wheels Optionals - Polypropylene filter (efficiency 300 or 100 micron) for further and finer filtration of the liquid. - Suction from machine tools of oils and s mixed with metal chips or other solid material

5 - Reduced stand-by time of machine tools - Saving by recovering and using several times the same oil and - Possibility to suck up and pump out simultaneously

6 TECNOIL 250 T3 INDUSTRIAL VACUUM FOR OIL AND COOLANT RECOVERY Voltage Volts Hertz Motors N (110) 50/60 3,6 4,5 Max Vacuum Rate* mm.h2o 2300 Max Air Flow** M3/h 600 Filter Surface cm Capacity (liquid) Lt. 250 Capacity (solid) Lt. 40 Noise level db 76 Pump Rate Lt./Min 300 Dimensions cm 55x110 Height cm 140 Weight Kg Mobile, compact and powerful, the vacuum cleaner TECNOIL is the ideal machine to suck up liquid (oil or ) mixed with metal chips, separate the oil from the chips and recover the oil thanks to a powerful electric pump. - The suction is provided by three by-pass motors, placed inside a sturdy steel casing and providing high depression (max 280 mbar) and operated by independent switches. A vacuum indicator is installed in order to detect possible clogging or anomalies in the suction; the motor head is protected from liquid and solid material through a nylon filter and a floating device, automatically stopping the suction when the liquid fills up the container. - A metal sieve grid (40 litres capacity) withholds the solid material (chips and metal parts ), while the clean oil goes into the lower container (capacity 150 litres). It is then possible to pump it out rapidly, through a powerful electric pump (300 litres per minute), fitted with a 2 mt. discharge oil proof hose fitted with a gun and valve. - The container is made of polyester coated steel, compact and easy to move; two baskets provide a support for tools and hoses when not used. - The vacuum cleaner is mounted on a solid steel trolley, equipped with braking and turning wheels Optionals - Polypropylene filter (efficiency 300 or 100 micron) for further and finer filtration of the liquid. - Suction from machine tools of oils and s mixed with metal chips or other solid material - Reduced stand-by time of machine tools

7 - Saving by recovering and using several times the same oil and - Possibility to suck up and pump out simultaneously

8 TECNOIL 250 MP INDUSTRIAL VACUUM FOR CHIPS AND OIL RECOVERY Voltage Volts Hertz 230/ Max Vacuum Rate* mm.h2o 3000 Max Air Flow** M3/h 300 Standard filter efficiency Micron 300 Type of Filter Capacity (liquid) Lt. 250 Capacity (solid) Lt. 40 Noise level db 78 Pump Rate Lt./Min 100 Protection IP 55 Insulation Cl F Dimensions cm 55x110 Height cm 160 Weight Kg Polypropylene bag - Mobile, compact and powerful, the vacuum cleaner TECNOIL is the ideal machine to suck up liquid (oil or ) mixed with metal chips, separate the oil from the chips and recover the oil thanks to a powerful electric pump. - The suction unit is a turbine motor of the side channel blower type: the fan being directly shafted on the motor shaft, this type of motor requires no transmission system and provides a performance of RPM. It is thus completely maintenance free, ideal for non-stop and heavy duty performance, very silent and resistant, matching an IP 55 level. The suction unit is protected by a nylon filter and a floating device, automatically stopping the suction when the liquid fills up the container - A metal sieve grid (40 litres capacity) withholds the solid material (chips and metal parts ), while the clean oil goes into the lower container (capacity 250 litres). A polypropylene filter (efficiency 300 micron) enables a further and finer filtration of the liquid. - It is then possible to pump it out rapidly, through a powerful electric pump (300 litres per minute, fitted with a 2 mt. discharge oil proof hose fitted with a gun and valve. - The collection tank is made of polyester coated steel, and has a slanted shape in order to secure complete disposal of the liquid inside; two baskets provide a support for tools and hoses when not used, and a bolted panel enables easy cleaning of the collection tank. - The vacuum cleaner is mounted on a solid steel trolley with two baskets to lay the accessories, equipped with braking and turning wheels Optionals - Polypropylene filter (100 micron) for very fine filtration of the liquid. - Suction from machine tools of oils and s mixed with metal

9 chips or other solid material - Reduced stand-by time of machine tools - Saving by recovering and using several times the same oil and - Possibility to suck up and pump out simultaneously

10 TECNOIL 450 T55 INDUSTRIAL VACUUM FOR OIL AND COOLANT RECOVERY Voltage Volts Hertz 230/400 50/60 5,5 7,5 Max Vacuum Rate* mm.h2o 6000 Max Air Flow** M3/h 320 Filter Surface cm Type of Filter Capacity (liquid) Lt. 450 Capacity (solid) Lt. 60 Noise level db 78 Pump Rate Lt./Min 300 Protection IP 55 Insulation Cl F Dimensions cm 65x110 Height cm 190 Weight Kg 300 Polypropylene bag - The suction unit is a turbine motor of the side channel blower type: the fan being directly shafted on the motor shaft, this type of motor requires no transmission system and provides a performance of RPM. It is thus completely maintenance free, ideal for non-stop and heavy duty performance (providing extra vacuum, up to 5000 mm. H2O depression), very silent and resistant, matching an IP 55 level. The suction unit is protected by a nylon filter and a floating device, automatically stopping the suction when the liquid fills up the container - The solid material (chips, metal parts and fine remains) are collected into a collection hopper placed on top of the collection tank, and withheld into a metal sieve grid (60 litres capacity); a user-friendly mechanism enables to tilt the hopper and discharge easily the collected solid material, while the cleaned liquid flows into the lower collection tank (450 litres capacity). The collection tank is made of polyester coated steel, and has one slanted side in order to secure complete disposal of the liquid inside; two baskets provide a support for tools and hoses when not used, and a bolted panel enables easy cleaning of the collection tank. - A powerful electric pump (300 litres per minute), with a 2 mt. discharge oil proof hose fitted with a gun and valve, enables to pump out very rapidly the collected liquid. - The vacuum cleaner is mounted on a solid steel trolley with two baskets to lay the accessories, equipped with braking and turning wheels Optionals - Polypropylene filter (300 or 100 micron) for very fine filtration of the

11 liquid. - Suction from machine tools of oils and s mixed with metal chips or other solid material - Reduced stand-by time of machine tools - Saving by recovering and using several times the same oil and - Possibility to suck up and pump out simultaneously

12 TECNOIL 700 T110 INDUSTRIAL VACUUM FOR OIL AND COOLANT RECOVERY Voltage Volts Hertz 400/690 50/ Max Vacuum Rate* mm.h2o 6000 Max Air Flow** M3/h 520 Filter Surface cm Type of Filter Capacity (liquid) Lt. 700 Capacity (solid) Lt. 60 Noise level db 78 Pump Rate Lt./Min 300 Protection IP 55 Insulation Cl F Dimensions cm 75x130 Height cm 220 Weight Kg 500 Polypropylene bag - The suction unit is a turbine motor of the side channel blower type: the fan being directly shafted on the motor shaft, this type of motor requires no transmission system and provides a performance of RPM. It is thus completely maintenance free, ideal for non-stop and heavy duty performance (providing extra vacuum, up to 5000 mm. H2O depression), very silent and resistant, matching an IP 55 level. The suction unit is protected by a nylon filter and a floating device, automatically stopping the suction when the liquid fills up the container - The solid material (chips, metal parts and fine remains) are collected into a collection hopper placed on top of the collection tank, and withheld into a metal sieve grid (60 litres capacity); a user-friendly mechanism enables to tilt the hopper and discharge easily the collected solid material, while the cleaned liquid flows into the lower collection tank (700 litres capacity). The collection tank is made of polyester coated steel, and has one slanted side in order to secure complete disposal of the liquid inside; two baskets provide a support for tools and hoses when not used, and a bolted hatch enables easy cleaning of the collection tank. - A powerful electric pump (300 litres per minute), with a 2 mt. discharge oil proof hose fitted with a gun and valve, enables to pump out very rapidly the collected liquid. - The vacuum cleaner is mounted on a solid steel trolley with two baskets to lay the accessories, equipped with braking and turning wheels

13 Optionals - Polypropylene filter (300 or 100 micron) for very fine filtration of the liquid. - Suction from machine tools of oils and s mixed with metal chips or other solid material - Reduced stand-by time of machine tools - Saving by recovering and using several times the same oil and - Possibility to suck up and pump out simultaneously